Boomer T1 D - Atlas Copco

SpecificationsBoomer T1 D with COP 1638HD+, COP 1838HD+ or COP 2238HD+DRIFTER RODSDimensionMin. hole diameterSHANK ADAPTERSThread Diameter Lengthmm R38-HEX 35-R32 45T38-HEX 35-R32 45T38-HEX 35-R32 Speedrod 45R38-HEX 35-SR35 Speedrod 45T38-HEX 35-SR35 45T38-Rnd 39-SR35 45T38-HEX 35-R35 48T38-HEX 35-R35 Speedrod 48T38-Rnd 39-R35 48T38-Rnd 39-R35 Speedrod 48mm R38 38 435T38 38 435R32* 38 525T38* 38 525*Intended for extension drilling with BSH 110COUPLINGSThread Diameter Lengthmm R38 55 170T38 55 190EXTENSION RODS FOR INJECTION DRILLING/RASDimensionMin. hole diametermm R32 Speedrod 51T38 Speedrod 64Optional equipment»»Rock drill• Big hole drilling system• Water mist flushing, external water and air supply--Hydraulic oil cooled by water--Hydraulic oil cooled by air fan• Hole blowing kit with 50 l air receiver (CE Approved)»Feed »• Telescopic feed BMHT 2000-series (max 12 ft)• Extension drilling set BSH 110 (BMH feeds only)• Long Hole Drilling system (manual rod handling)--BMH or BMHS 2000 series production feed(1.2, 1.5 or 1.8m extension steels)--BSH 45 drill steel support--Rear stinger--FAM T1 angle reading instrument• Bulk head style hose tree on feeds»Boom »• Feed Angle Measurement, FAM T1 (including electronicparallel hold)• Automatic boom lubrication kit, rear part of boom• Boom suspension system»Hydraulic »system• Biodegradable hydraulic oil• Hydraulic oil thermostat• Heater kit for hydraulic oil tank»Carrier »• Fire suppression system ANSUL (manual or Checkfire)• Illuminated stairs for platform/cabin»Protective »roof• Manual spotlight»Cabin »• FOPS/ROPS approved cabin, noise level

MeasurementsSIDE VIEWBoomer T1 D with COP 1638HD+, COP 1838HD+ or COP 2238HD+46772726COVERAGE AREA650020244910152030°T1DDIMENSIONS212741904570125030°125023.3 m 2mm Width 1 300Height roof down 2 024Height roof up 2 726Length with BMH 2837 feed 9 651Ground clearance (with std tires) 296TRAMMING SPEEDkm/h On flat ground (rolling resistance 0.05) >14WEIGHTgross weightOn incline 1:8 > 6kg Total 11 000Boom side 7 100Engine side 3 900NOISE AND VIBRATIONOperator sound pressure level in canopy, drilling,free field (ISO 11201)Operator sound pressure level in cabin, drilling,free field (ISO 11201)Operator sound pressure level working close tomachine, drilling, free fieldSound power level (ISO 3744), drilling, free fieldVibration levels seated, drilling (ISO 2631-1)Vibration levels standing, drilling (ISO 2631-1)9651104±6 dB(A) re 20uPa80± 5 dB(A) re 20uPa104±6 dB(A) re 20uPa128 dB(A) re 1pW0.07±0.07 m/s^20.07± 0.07 m/s^2TURNING RADIUS280040°R2985R4950COP 2238 (75KW MAIN MOTOR):RECOMMENDED CABLE SIZE AND LENGTHVoltage Type Dimension, mm 2 Diameter,mm380–400 V440 V500–525 V550–575 V660–690 V2800Buflex M 3x70+3G16+2x1x1,5 37 110Buflex M 3x70+3G16+2x1x1,5 37 110Buflex M 3x70+3G16+2x1,5 37 110Buflex M 3x50+3G10+2x1x1,5 32 150Buflex M 3x35+3G6+2x1x1,5 32 200Length,m1,000 VBuflex M 3x35+3G6+2x1,5 28 200Recommendations are given for surrounding temperature of 40° C and up to a height of 2 000 m.COP 1638/1838 (55KW MAIN MOTOR):RECOMMENDED CABLE SIZE AND LENGTHVoltage Type Dimension, mm 2 Diameter,mm380–400 V440 V500–525 V550–575 V660–690 VBuflex M 3x50+3G10+2x1x1,5 39 150Buflex M 3x50+3G10+2x1x1,5 39 150Buflex M 3x35+3G6+2x1x1,5 33 200Buflex M 3x35+3G6+2x1x1,5 33 200Buflex M 3x35+3G6+2x1x1,5 33 200Length,m1,000 VBuflex M 3x35+3G6+2x1,5 28 200Recommendations are given for surrounding temperature of 40° C and up to a height of 3 500 m.© Copyright 2013, Atlas Copco Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photosmay show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.9851 2457 01d 04/2013