RS6 Manual - Niles Audio

INSTALLATIONInstalling the Security Bracket and Cable1. With the loudspeaker in the proper location per the layout, turn the loudspeakerover so the bottom of the loudspeaker is facing you, as shown in Figure 7.Figure 7 Bottom of Loudspeaker2. Take the nylon security cable, supplied with the loudspeaker and fold it in half.Using the middle of the cable, feed it through the Security Attachment Eyelet asshown in Figure 8.Figure 8 Security Cable in Eyelet3. Feed the opposite end of the nylon security cable through the exposed portionof the cable that was just fed through the security eyelet, as shown inFigure 9 and 10.Figure 9 Security CableLooping ThroughFigure 10 Security Cable after Looping13