catalogue 2009

list of termsSE - NON-MAINTAINEDThe fitting is off when regular power is on. Thefitting turns on after the power cut and stays onduring the emergency operation time 1, 2 or 3hours.SA - MAINTAINEDThe fitting is on when regular power is on. After thepower is cut, it switches to the emergency modeand stays on during the emergency operationtime 1, 2 or 3 hours.PT - MANUAL TEST BUTTONThe fitting is equipped with a test button whichallows one to run a test of emergency modewithout switching off the regular power.RS - RUBIC MONITORING SYSTEMThe fitting is equipped with an addressing modulewith a unique address compatibile with the RUBICmonitoring system.AT - AUTOTESTThe fitting is equipped with an autonomous testingsystem.S - NETWORKThe fitting operating with regular power 230V50Hz is not equipped with emergency function.CB - FOR CENTRAL BATTERYThe fitting is equipped with an electronic AC/DC ballast compatibile with any central batterysystem.How to configure?Example SQUARE D fitting:type time [h] work power [W]optionSD 1 2 3 SE SA 11 18 2x11 2x18PTRS code: SD/2/SE/2x11/PT60