2 - Hayward Flow Control

TB SeriesTrue Union Ball Valves1/4" to 2" PVC and CPVCkey FeatUReS• PVC and CPVC• Full Port Design• Reversible PTFE Seats• Double O-Ring Stem Seals• Easily Actuated• NSF / ANSI 61 ListedSELECTION CHARToPtionS• Lockouts Available• 2" Square Operating Nut• Stem Extensions• Pneumatic and Electric Actuators• Spring Return HandleVAlVes And AccessoriesSizeMateRialendConneCtionSealSPReSSUReRatingSizes 1/4" – 2"1/4" – 3/8"(DN8 – DN10)1/2" – 2"(DN15 – DN50)PVC Socket and ThreadedFPM orEPDMPVC or CPVCSocket and Threadedor Flanged** All fl anged valves are rated to 150 PSI @ 70°F Non-Shock250 PSI @ 70°FNon-ShockTB SeriesTrue Union Ball Valves2-1/2" to 6" PVC and CPVCkey FeatUReS• PVC and CPVC• Full Port Design Through 4"• Reversible PTFE Seats• Double O-Ring Stem Seals• Easily Actuated• NSF / ANSI 61 Listed• Actuator-Ready DesignoPtionS• Pneumatic and Electric Actuators• Lockouts Available• Gear Operator• 2" Square Operating Nut• Stem Extensions• Spring Return HandleSELECTION CHARTSizeMateRialendConneCtionSealSPReSSUReRating2-1/2" – 4"(DN63 – DN100)6" *(DN150)PVC or CPVCSocket, Threadedor Flanged**FlangedFPM orEPDM235 PSI @ 70°FNon-Shock150 PSI @ 70°FNon-Shock* 4" valve venturied to 6" ** All fl anged valves are rated to 150 PSI @ 70°F Non-ShockSizes 2-1/2" – 4"1A1.888.429.4635 • www.haywardflowcontrol.com1B3

TBZ Series “Z-Ball”True Union Ball Valves1/2" to 6" PVC and CPVCkey FeatUReS• PVC and CPVC• Full Port Design• Reversible PTFE Seats• Double O-Ring Stem Seals• For Sodium Hypochlorite Applications• Adjustable Seat RetaineroPtionS• Lockouts Available• Stem Extensions• Spring Return Handle• Pneumatic andElectric Actuators• 2" Square Operating NutSELECTION CHARTSize1/2" – 2"(DN15 – DN50)2-1/2" – 4"(DN63 – DN100)6" *(DN150)MateRialPVC or CPVCendConneCtionSocket and Threadedor Flanged**Socket, Threadedor Flanged**FlangedSealSFPMPReSSUReRating250 PSI @ 70°FNon-Shock235 PSI @ 70°FNon-Shock150 PSI @ 70°FNon-Shock* 4” valve venturied to 6” ** All fl anged valves are rated to 150 PSI @ 70°F Non-ShockCV Series Profile2 Proportional Control Ball Valves1/2" to 6" PVC and CPVCkey FeatUReS• PVC and CPVC• Reversible Seats• True Union Design• Manual or Actuated• Precise Flow ControlaPPliCationS• Fill Station Lines• Lateral Take-Off Line Flow Control• Flow Reduction in Systems withOversized Pumps• Control Flow From TanksSELECTION CHARTSize1/2" – 2"(DN15 – DN50)2-1/2" – 4"(DN63 – DN100)6" *(DN150)MateRialPVC or CPVCendConneCtionSocket and Threadedor Flanged**Socket, Threadedor Flanged**FlangedSealSFPM orEPDMPReSSUReRating250 PSI @ 70°FNon-Shock235 PSI @ 70°FNon-Shock150 PSI @ 70°FNon-Shock* 4” valve venturied to 6” ** All fl anged valves are rated to 150 PSI @ 70°F Non-Shock4www.haywardflowcontrol.com • 1.888.429.4635

TW Series Three-WayTrue Union Ball Valves1/2" to 6" PVC and CPVCkey FeatUReS• PVC and CPVC• Position Indicator• Easily Actuated• PTFE Seats• FPM or EPDM O-Rings• Double O-Ring Stem SealSELECTION CHARToPtionS• Lockouts Available• Pneumatic and Electric Actuators• Cross-Flow Ball• NT Ball• TP BallVAlVes And AccessoriesSizeMateRialendConneCtionSealSPReSSUReRating1/2" – 4"(DN15 – DN100)6" *(DN150)PVC or CPVCSocket, Threadedor FlangedFlangedFPM orEPDM150 PSI @ 70°FNon-Shock* 4” valve venturied to 6”LA Series Lateral Three-WayTrue Union Ball Valves1/2" to 6" PVC and CPVCkey FeatUReS• PVC and CPVC• PTFE Seats• FPM or EPDM O-Rings• Double O-Ring Stem Seal• Simplifi es Lateral Connections• Replaces Valve/TeeConnection Combinations• Quick, Easy To Install• Replacement for Zero Dead-Leg ValvesoPtionS• Lockouts Available• Pneumatic and Electric ActuatorsSELECTION CHARTSizeMateRialendConneCtionSealSPReSSUReRating1/2" – 4"(DN15 – DN100)6" *(DN150)PVC or CPVCSocket and Threadedor FlangedFlangedFPM orEPDM150 PSI @ 70°FNon-Shock* 4” valve venturied to 6”1A1.888.429.4635 • www.haywardflowcontrol.com1B5

QV Series QIC2 Compact Ball Valves1/2" to 2" PVCkey FeatUReS• Gray PVC• Rugged, Compact andLightweight Design• Full Port Design• PTFE Seats• EPDM O-Ring Seals• Low Torque, Easy 1/4-Turn Operation• No Integral Parts to Replace• Perfect for OEM RequirementsSELECTION CHARTSizeMateRialendConneCtionSealSPReSSUReRating1/2" – 2"(DN15 – DN50)PVCSocket andThreadedEPDM150 PSI @ 70°FNon-ShockValve-Safe LockoutsFoR Ball ValVeS UP to 6"key FeatUReS (a)• For Ball Valves up to 6"• Latches and Lockable inOpen / Close Position• Simple Trigger Mechanical Design• Can Use with Lockout / Tagout Haspkey FeatUReS (B)• PP Housing Material• For All Ball Valves up to 6"• Use with up to 3 PadlocksAB6www.haywardflowcontrol.com • 1.888.429.4635

TBB Series True UnionCommercial Ball Valves1/2" to 4" PVC, CPVC, PP and PVdFkey FeatUReS• PVC, CPVC, PP and PVDF• Full Port Design• FPM or EPDM SealsSELECTION CHARTSize1/2" – 4"(DN15 – DN100)1/2" – 4"(DN15 – DN100)1/2" – 4"(DN15 – DN100)MateRialPVC or CPVCPPPVDFendConneCtionSocket, Threadedor Flanged*Threadedor Flanged* All fl anged valves are rated to 150 PSI @ 70°F Non-Shock• PTFE Seats• Double O-Ring Stem Seals• Adjustable Seat RetainerSealSFPM orEPDMFPMPReSSUReRating225 PSI @ 70°FNon-Shock150 PSI @ 70°FNon-ShockVAlVes And AccessoriesQTA Series True UnionCompact Ball Valves1/2" to 2" PVCkey FeatUReS• Gray and White PVC• True Union End Connections• Rated at a Full 150 PSI• Santoprene ® (TPV) Seats• EPDM O-Ring SealsSELECTION CHART• No Internal Parts to Replace• Low Torque Easy1/4-Turn Operation• Perfect For OEM Applications• Socket or Threaded ConnectionsSizeMateRialendConneCtionSealSPReSSUReRating1/2" – 2"(DN15 – DN50)PVC(Gray or White)Socket andThreadedEPDM150 PSI @ 70°FNon-ShockQVC SeriesCompact Ball Valves1/2" to 4" PVCkey FeatUReS• Gray and White PVC• Compact and Lightweight Design• Low Torque Easy 1/4-Turn Operation• Santoprene (TPV) Seats• EPDM O-Ring Seals• No Internal Parts to ReplaceSELECTION CHARTSizeMateRialendConneCtionSealSPReSSUReRating1/2" – 4"(DN15 – DN100)PVC(Gray or White)Socket or ThreadedEPDM150 PSI @ 70°FNon-Shock1A1.888.429.4635 • www.haywardflowcontrol.com1B7

SW Series SwingCheck Valves3" to 8" PVC, CPVC and gFPPkey FeatUReS• PVC, CPVC and GFPP• High Temperature / Pressure Ratings• Two-in-One Seal Design• Built-in Flange Seals• Two Drain Ports• Self-Aligning Clapper SealsoPtionS• Counterweight forClosing AssistanceSELECTION CHARTSizeMateRialendConneCtionSealSPReSSUReRating3" – 4"(DN80 – DN100)6" – 8"(DN150 – DN200)* 8" not available in CPVCPVC, CPVC*or GFPPFlangedFPM orEPDM150 PSI @ 70°FNon-ShockWC Series WaferCheck Valves2" to 20" PVC, PP and PVdFkey FeatUReS• PVC, PP and PVDF• FPM, EPDM or PTFE O-Ring Seats• Compact and Lightweight• Easy Installation• Vertical or Horizontal OperationoPtionS• Spacers• Stainless Steel or Hastelloy ®Disc Springs*SELECTION CHARTSizeMateRialendConneCtiono-Ring SPRingPReSSUReRating2" – 6" *(DN50 – DN150)8" *(DN200)10" – 12"(DN250 – DN300)PVC, PPor PVDFFlangedFPM,EPDM orPTFE***316 SS,Hastelloy150 PSI@ 70°FNon-Shock100 PSI@ 70°FNon-Shock90 PSI@ 70°FNon-Shock* Valve shown with spring option14" – 20" **(DN350 – DN500)Consultwith factory* Spacers standard for PVC, PP up to 8" ** Up to 40" special order *** PTFE encapsulated FPM8www.haywardflowcontrol.com • 1.888.429.4635

TC Series True Union Ball Check Valves1/4" to 6" PVC, CPVC and PPSizes 1/4" – 4"PVC and CPVCkey FeatUReS• PVC, CPVC and PP• For Horizontal or Vertical Installation• 1/2" to 6" are Sure Block Design• Square Cut Seat for Positive Sealing• Seats with Minimum Back Pressure• 1/4" and 3/8" areTrim Check DesignoPtionS• Foot Valve ScreensSELECTION CHARTSize MateRial end ConneCtion SealSPReSSUReRating1/4" – 3/8" *(DN8 – DN10) PVC Socket or Threaded FPM 150 PSI @ 70°FNon-Shock1/2" – 2"(DN15 – DN50)PVC or CPVCSocket and Threadedor Flanged ****FPM orEPDM1/2" – 2"(DN15 – DN50) PP ** Threaded FPM2-1/2" – 4"(DN63 – DN100) PVC or CPVCSocket, Threadedor FlangedFPM orEPDM6" ***(DN150) PVC or CPVC FlangedFPM orEPDM235 PSI @ 70°FNon-Shock150 PSI @ 70°FNon-Shock* Trim Checks ** 2" PP is rated to 100 PSI @ 70°F Non-Shock *** 4" valve venturied to 6"**** All fl anged valves are rated to 150 PSI @ 70°F Non-ShockVAlVes And AccessoriesYC Series Y-Check Valves1/2" to 4" PVC and CPVCkey FeatUReS• PVC and CPVC• Full Flow Design• Minimum Pressure Drop• PVC Coil to Guide Pistonto a Positive Seat• Minimal Back PressureRequired to Seat PistonSELECTION CHARTSize1/2" – 4"(DN15 – DN100)MateRialPVC or CPVCendConneCtionSocket, Threaded,Flanged orTrue UnionSealSFPM orEPDMPReSSUReRating150 PSI @ 70°FNon-ShockoPtionS• Drilled Cap for Easy Drainage• True Union End ConnectionsSLC Series Spring-Loaded Y-Check Valves1/2" to 4" PVCkey FeatUReS• PVC• Full Flow Design• Closes with No Back Pressure• Adjustable – Opens From 2 to 15 PSI• Easy Maintenance• Opens in Any PositionoPtionS• True Union End ConnectionsSELECTION CHARTSize1/2" – 4"(DN15 – DN100)MateRialPVC or CPVCendConneCtionSocket, Threaded,Flanged orTrue UnionSealSFPM orEPDMPReSSUReRating150 PSI @ 70°FNon-Shock1A1.888.429.4635 • www.haywardflowcontrol.com1B9

DAB Series True Union Diaphragm Valves1/2" to 2" PVC, CPVC, PP and PVdFkey FeatUReS• PVC, CPVC, PP and PVDF• Position Indicator• Sure-Grip Handwheel• Choice of FPM, EPDM orPTFE Diaphragms*oPtionS• Electric or Pneumatic Actuation• PVDF Vapor Barrier*** All PTFE diaphragms are EPDM backed** PVDF Vapor Barrier available with EPDMand PTFE diaphragm onlySELECTION CHARTSize1/2" – 2"(DN15 – DN50)1/2" – 2"(DN15 – DN50)MateRialPVC or CPVCPP or PVDFendConneCtionSocket andThreadedThreadeddiaPhRagM SealSPReSSUReRatingFPM, EPDM,PTFE or PVDFVapor BarrierFPM orEPDM150 PSI @70°FNon-ShockFloW control VAlVesDAB Series Flanged Diaphragm Valves1/2" to 6" PVC, 1/2" to 4" CPVC, 1/2" to 10" PP and 1/2" to 8" PVdFkey FeatUReS• 1/2" to 6" PVC, 1/2" to 4" CPVC,1/2" to 10" PP and 1/2" to 8" PVDF• Position Indicator• Sure-Grip Handwheel• Choice of FPM, EPDM orPTFE Diaphragms*oPtionS• Pneumatic or Electric Actuation to 4"• Over 4" Actuation, Consult Factory• PVDF Vapor Barrier*** All PTFE diaphragms are EPDM backed** PVDF Vapor Barrier available with EPDMand PTFE diaphragm onlySELECTION CHARTSize1/2" – 4"(DN15 – DN100)6"( DN150)1/2" – 4"(DN15 – DN100)1/2" – 4"(DN15 – DN100)6" – 10"(DN150 – DN250)1/2" – 4"(DN15 – DN100)6" – 8"(DN150 – DN250)MateRialPVCCPVCPPPVDFendConneCtion diaPhRagM PReSSUReRatingFlangedFPM, EPDM,PTFE or PVDFVapor BarrierPTFE150 PSI @ 70°F Non-Shock75 PSI @ 70°F Non-Shock150 PSI @ 70°F Non-Shock150 PSI @ 70°F Non-Shock75 PSI @ 70°F Non-Shock150 PSI @ 70°F Non-Shock75 PSI @ 70°F Non-ShockSV Series True Union Solenoid Valves1/4" to 1" PVC and CPVCkey FeatUReS• PVC and CPVC• Continuous or 100%Duty Applications• Corrosion-Resistant Polyester Coil• No Pressure Differential Requiredfor Operation• Both 1/2" Conduit or SJ-Type CordElectrical Connection• 110 VAC StandardoPtionS• 12 VAC, 24 VAC, 220 VAC,12 VDC, 24 VDCoPeRating PaRaMeteRSFor optimum valve performance, inlet pressure must not exceed120 PSI. Flow velocity must 1Anot exceed 5 ft. per second.SELECTION CHARTSize1/4", 1/2", 3/4", 1"(DN8 – DN25)MateRialPVC or CPVCendConneCtionSocket andThreadedSealSFPM orEPDMPReSSUReRating150 PSI @ 70°FNon-Shock1.888.429.4635 • www.haywardflowcontrol.com1B11

RV Series Pressure Relief Valves1/2" to 2" PVC and CPVCkey FeatUReS• PVC and CPVC• Hand Adjustable,No Tools Needed• Integrally Molded ThreadedGauge Port• Pressure Relief from5 PSI to 75 PSIoPtionS• 0 to 30 PSI Gauge• 0 to 60 PSI Gauge• 0 to 160 PSI Gauge• Gauge Guards• 2 to 20 PSI for 1-1/2" to 2"with Low Pressure Spring• Flanged EndsSELECTION CHARTSize1/2" – 2"(DN15 – DN50)MateRialPVC or CPVCendConneCtionThreaded orFlangedSealSFPM orEPDMPReSSUReRating150 PSI @ 70°FNon-ShockPR Series Pressure Regulator Valves1/4" to 1-1/2" PVC and CPVCkey FeatUReS• PVC and CPVC• Hand Adjustable,No Tools Needed• Integrally Molded ThreadedGauge Port• Regulates from 5 to 75 PSI• Prevents DownstreamPressure from Exceedingthe Set PressureoPtionS• 0 to 30 PSI Gauge• 0 to 60 PSI Gauge• 0 to 160 PSI Gauge• Gauge Guards• Flanged EndsSELECTION CHARTSize1/4" – 1-1/2"(DN8 – DN40)MateRialPVC or CPVCendConneCtionThreaded orFlangedSealSPReSSUReSettingFPM5 to 75 PSIPReSSUReRating150 PSI@ 70°FNon-ShockAV Series Angle Globe Valves1/4" to 2" PVCkey FeatUReS• PVC• Space Saving 90° Body• Panel Mount Lugs on1/4" Size• Fine Pitch Stem Threadsfor Precision Adjustment• Reliable Globe Valve Design• Perfect for Throttling andChanging Flow DirectionoPtionS• Flanged EndsSELECTION CHARTSize1/4" – 2"(DN8 – DN50)MateRialPVCendConneCtionThreaded orFlangedSealSFPMPReSSUReRating150 PSI @ 70°FNon-Shock12www.haywardflowcontrol.com • 1.888.429.4635

NVA Series Needle Valves1/4" to 1/2" PVC and gFPPkey FeatUReS• Available in PVC and GFPP• Integrated Stem / PTFE Seat Design• Flanges for Panel Mounting• NPT Threaded Ends• Accurate Flow Control• Fine Pitch Stem Threads forPrecise Adjustment• Adjust Flow Rates Downto Drops per Minute• Ideal for Metering Flow• Patent PendingFloW control VAlVesSELECTION CHARTSizeMateRialendConneCtionSealSPReSSUReRating1/4" – 1/2"(DN8 – DN15)PVC or GFPP Threaded FPM150 PSI @ 70°FNon-ShockLC Series Universal Stopcock 1/4" PVCkey FeatUReS• PVC• Six End Connections in One Package• EPDM Seat and Seals• Hex Wrench Included for EndConnection Installation• NSF / ANSI 61 ListedSELECTION CHARTSizeMateRialendConneCtionSealSPReSSUReRating1/4"(DN8)PVCFPT x FPTFPT x MPTFPT x HoseMPT x MPTMPT x HoseHose x HoseEPDM150 PSI @ 70°FNon-ShockFPT = female pipe thread, MPT = male pipe thread1A1.888.429.4635 • www.haywardflowcontrol.com1B13

EA Series Automated True Union Ball Valves1/2" to 2" PVC and CPVCValve FEATURES• PVC and CPVC• EPDM Seals• PTFE Seats• Full Port Design• Fully Serviceable• Double O-Ring Stem SealsActuator FEATURES• UL / CSA Listed Motor• Thermoplastic NEMA 4/4X enclosure• 2.5 Second, 90° Cycle Time• Thermal Overload Protection• Permanently Lubricated Gear TrainSELECTION CHART• Actuator Brake• No Need for Manual Adjustments• Blind Leads Connection• Standard 120 VACSizeMaterialEndConnectionSealsValvePressureRating1/2" – 2"(DN15 – DN50)CPVCSocket andThreadedEPDM250 PSI @ 70°FNon-ShockEAU Series Automated True Union Ball Valves1/2" to 2" PVC and CPVCValve FEATURES• PVC and CPVC• FPM or EPDM Seals• PTFE Seats• Full Port Design• Fully Serviceable• Double O-Ring Stem SealsActuator Features• UL / CSA Listed Motor• Thermoplastic NEMA 4/4X Enclosure• 2.5 Second, 90° Cycle Time• Permanently Lubricated Gear Train• Actuator BrakeSELECTION CHART• 90 or 180° Operation• Undirectional, Not Reversing• Terminal Block Connections• Standard 120 VACSizeMaterialEndConnectionSealsValvePressureRating1/2" – 2"(DN15 – DN50)PVC or CPVCSocket andThreadedFPM orEPDM250 PSI @ 70°FNon-ShockPM Series Automated True Union Ball Valves1/2" to 2" PVC and CPVCValve FEATURES• PVC and CPVC• FPM or EPDM Seals• PTFE Seats• Full Port Design• Fully Serviceable• Double O-Ring Stem SealsActuator Features• Corrosion-ResistantThermoplastic Housing• Permanently Lubricated Gear Train• Manual Override• Two-Piston Rack and Pinion DesignSELECTION CHART• Namur-Style Mounting• Position Indicator• Air-to-Air (Double Acting)or Spring ReturnSizeMaterialEndConnectionSealsValvePressureRating1/2" – 2"(DN15 – DN50)PVC or CPVCSocket andThreadedFPM orEPDM250 PSI @ 70°FNon-Shock14www.haywardflowcontrol.com • 1.888.429.4635

PCD/PCS Series Pneumatic ActuatorsFoR Ball and BUtteRFly ValVeS UP to 24"key FeatUReS• For All Sizes of Ball andButterfl y Valves• Four-Piston Rack andPinion Design• Manual Override• Compact, Lightweight• Position Indicator• Namur-Style SolenoidMounting• Adjustable Travel Stops• ISO 5211 Mounting BaseoPtionS• PCD Double ActingAir-to-Open and Close• PCS Spring ReturnFail-Safe Operation• Solenoid Valves• Positioners• Auxiliary Limit Switches• Cycle Speed ControlsSPECIFICATIONShoUSing: ...............................................Epoxy-Coated AluminumoUtPUt ShaFt: ....................................Plated SteelMiniMUM aiR PReSSURe: ...................80 PSIMaXiMUM aiR PReSSURe: ..................120 PSICyCle tiMe: ..........................................Less Than One Second, TypicalaiR PoRt ConneCtionS: ...................1/4" NPTActuAtion And controlsPMD/PMS Series Pneumatic ActuatorsFoR Ball ValVeS UP to 2"key FeatUReS• Corrosion-ResistantThermoplastic Housing• Two-Piston Rack andPinion Design• Manual Override• Position Indicator• Permanent Lubrication• Lightweight• Namur-Style Mounting• ISO 5211 Mounting BaseoPtionS• PMD Double ActingAir-to-Open and Close• PMS Air to SpringFail-Safe Operation• Solenoid Valves withOptional Voltage• Auxiliary Limit Switch• Cycle Speed ControlsSPECIFICATIONShoUSing: ...............................................PolyamideoUtPUt ShaFt: ....................................Stainless SteelMiniMUM aiR PReSSURe: ...................80 PSIMaXiMUM aiR PReSSURe: ..................120 PSISealS: .....................................................NitrileCyCle tiMe: ..........................................Half Second, TypicalaiR PoRt ConneCtionS: ...................1/4" NPTEAU Series Electric ActuatorsFoR Ball ValVeS UP to 2"key FeatUReS• Thermoplastic NEMA4/4X Enclosure• 90 or 180 DegreeOperation• Lightweight, Compactand Inexpensive• On/Off ServiceApplications, Unidirectional• UL / CSA Listed MotorPermanently LubricatedoPtionS• Voltage Options of 12,24 or 220 VAC and12 or 24 VDCSPECIFICATIONShoUSing: ...............................................GFPPoPeRation: ...........................................UnidirectionalCondUit Size: .......................................1/2"dUty CyCle: .........................................25%CyCle tiMeS: ........................................2-1/2 Seconds, 90° Rotation;5 Seconds, 180° RotationenCloSURe: ..........................................NEMA 4/4XVoltage: ...............................................120 VACtheRMal oVeRloadPRoteCtion MeChaniCalBRake MotoR: .....................................UL ListedaUXiliaRy liMit SwitCheS: ...............One1A1.888.429.4635 • www.haywardflowcontrol.com1B15

EPM Series On/Off and Proportional Control ActuatorsFoR Ball and BUtteRFly ValVeS UP to 24"* Manual Override Option(EPM8 and up) –Handwheel Shownkey FeatUReS• Modular Design• Superior Gear Design• Thermal Management(Proportional Control Only)• Data Logging andDiagnostics(Proportional Control Only)• 4 Limit Switches(2 Auxiliary)• Internal Low Power Heater• NEMA 4/4X Enclosure• Position Indicator• Clutchless ManualOverride• Self-Locking Drive• Permanently Lubricated• Thermal Overload• CE Listed andCSA Certifi ed• ISO 5211 Mounting BaseoPtionS*• Positioners• Power Supply Flexibility– 3 Phase 2/230 VAC,380 VAC or 460 VACSPECIFICATIONS• Extended Duty Motors• Feedback Potentiometer• Local Control Station* Not available on all modelsoPeRation: .................................... ReversingCondUit Size: ................................ 1/2"dUty CyCle: .................................. (EPM2) 25-50% On/Off Only(EPM3) 25-50% On/Off,75% Proportional Control(EPM8, 13, 35 and 130) 25-50% On/Off,100% Managed Proportional ControlCyCle tiMeS: ................................. 8-46 Seconds, Depending On ModelenCloSURe: ................................... NEMA 4/4XVoltageS: ...................................... (EPM2) 12 VDC, 24 VDC, 120 VAC, 230 VAC(EPM3, 8 and 13) 12 VAC/DC, 24 VAC/DC,120 VAC, 230 VAC(EPM35) 12 VAC, 24 VAC,120 VAC, 230 VAC(EPM130) 120 VAC, 230 VACtheRMal oVeRloadPRoteCtion MeChaniCalBRake oVeRRide: ......................... Clutchless ManualhoUSing: ........................................ Aluminum Alloy Dry Powder CoatedEPS Series On/Off and Proportional Control ActuatorsFoR Ball and BUtteRFly ValVeS UP to 8"key FeatUReS• Clockwise or Counter-Clockwise Spring Return• 4 Limit Switches(2 Auxiliary)• Internal Low Power Heater• NEMA 4/4X Enclosure• Position Indicator• Rack and Pinion Drive• Permanently Lubricated• Thermal Overload• CSA Certifi ed• ISO 5211 Mounting BaseoPtionS*• Positioners• Two AdditionalAuxiliary SwitchesSPECIFICATIONSoPeRation: ................................. ReversingCondUit Size: ............................. 3/4"• Clutchless ManualOverride Shown• Local Control Station* Not available on all modelsdUty CyCle: ............................... (EPS5, 12 and 18) 75% - 24V On/Off(EPS5, 12 and 18) 50% - 120V and 230V On/Off(EPS5, 12 and 18) 75% Proportional ControlCyCle tiMeS: .............................. 7-11 Seconds, 24V/120-230V3 Seconds, Spring 24V/120-230VenCloSURe: ................................ NEMA 4/4XVoltageS: ................................... (EPS5, 12 and 18) 24VAC/DC, 120VAC, 230VACtheRMal oVeRloadPRoteCtion MeChaniCalBRake oVeRRide: ...................... Clutchless Manual (Optional)hoUSing: ..................................... Aluminum Alloy Dry Powder Coated16www.haywardflowcontrol.com • 1.888.429.4635

EPL Series Linear Drive, Non-Spring Return ActuatorsFor Most Rising Stem Diaphragm Valves Up to 10"key FEATURES• Modular Design• 4 Different Output Forces• Internal Low Power Heater• NEMA 4/4X Enclosure• Position Indicator• Manual Override• Self-Locking Drive• Permanently Lubricated• Thermal Overload• CSA Certified• Universal Bonnet Mounting• Choice of Voltages: 24 VAC/DC,120 VAC and 230 VACSPECIFICATIONSOPERATION:......................................... Down and Upstroke length:............................... 0.79" – 3.94", Depending Upon Modelfull travel time:............................ 78-416 seconds, 24 VAC/DC, DependingUpon ModelENCLOSURE:....................................... NEMA 4/4X85-430 seconds, 120/1/60 VAC, DependingUpon Model87-424 seconds, 230/1/60 VAC, DependingUpon ModelVOLTAGE:............................................. 24 VAC/DC, 120 VAC, 230 VAC(EPL550-20 and 38, EPL550-1100-38and 50, EPL2200-38, 50, 75 and 100,EPL 4400-50, 75 and 100)THERMAL OVERLOADPROTECTION Override:................... ManualHousing:............................................. Aluminum Alloy Dry Powder CoatedActuation and controlsEPD Series Spring Return On/Off andProportional Control ActuatorsFor Ball and Butterfly Valves up to 6"KEY Features• Maintenance Free• Field AdjustableSpeed Control• Field Adjustable SpringReturn Control*• Auto-SwitchingPower Supplies• Hex Key Override andMounting Screws• Internal Low Power Heater• NEMA 4 Enclosure• Mechanical 12 mmDouble-Square DriveShaft Connection• Manual Override• Thermal Overload• ATEX Rated NEMA 4/IP66• Choice of Voltages: UnitsCan Operate on AnyVoltage from 24 VAC/VDCto 230 VAC/VDCoptions*• Two Internal End-ofTravel NonadjustableSwitches• Externally Mounted SwitchPack with 2 AdditionalAdjustable SwitchesSPECIFICATIONS• EMT Enclosure• Manual OverrideHandwheel* Not available on all modelsOPERATION:...................................Drive Open or Closed/Spring Opposite (EPD 2/3and EPD 4/5 On/Off Control) Drive Open/Closed:Spring Engaged Upon Loss of Electric Supply(EPD 2/3 And EPD 4/5 On/Off Control)Proportional Control (EPD 2/3 And EPD 4/5)DUTY CYCLE:.................................100% - 14 Sec. Mode, 10% - 3 Sec. Mode;One Power/Spring Cycle Per Minute Max.(EPD 2/3) 100% - All Models (EPD 4/5)run Time (power):.....................3/15/30/60/120 @ 90°; Field Selectable(EPD 2/3) 40/60/90/120/150 @ 90°;Field Selectable (EPD 4/5)run Time (spring):.....................3 or 10 Seconds @ 90°; Field SelectableEPD 2/3) 20 Seconds @ 90°; Fixed (EPD 4/5)3 sec. mode (spring):...............3-4 Seconds @ 90°; Load Dependant(EPD 2/3) N/A (EPD 4/5)enclosure:.................................NEMA 4/IP66THERMAL OVERLOADPROTECTION Override:.............ManualHousing:.......................................Aluminum Die Casting1A1.888.429.4635 • WWW.HAYWARDFLOWCONTROL.COM1B17

Local Control StationLocal Control Stations can be used with Series EPM, EPS and EPL Actuators,connect through the EMT entry, and are available in four different models to meetspecifi c application requirements. Custom confi gurations available (consult factory).key FeatUReS• Full Access Backplate• Door with 1/4 Turn Latch• NEMA 4 Enclosure• Multiple Mounting Capabilities• Remote Status Outputs• Switches and IndicatorLamps Rated NEMA 4X/IP66• Interfaces with 12 VAC/DC,24 VAC/DC, 24 VAC Single Phaseand Three Phase ApplicationsoPtionS• LA – Basic Version: No IndicatorLamps, No Remote Status Outputs,No Auxiliary Switch Pass-Through• LB – Mid-Level Version: 2 StatusIndicator Lamps, 2 Status HotOutputs, No Auxiliary SwitchPass-Through• LC – Full Version: 3 Status IndicatorLamps, Remote Status Monitoring,Auxiliary Switch Termination Block• LD – 3 Phase with Motor ControlOption: Full “LC” Type Controls,Interfaces to Existing MCC-AuxiliarySwitch Termination BlockEBU Battery BackupFoR USe with eP SeRieS eleCtRiC aCtUatoRSEBU Battery Backup Systems provide fail-safe operation for Series EPM, EPSand EPL Actuators using 2, 3 or 4 wire connections,* and support both on/offand proportional control.* Additional fi eld wiring may be required between the EBU and the actuator (consult factory).key FeatUReS• Clear Polycarbonate Cover• NEMA 4/4X Enclosure• Field Selectable Fail Direction• Provides 500% of PowerRequirements for a Full Load Cycle• Interfaces with 2, 3 or 4 WireControl Systems• Automatic Battery Charging andCharge Status Indicator• Sealed Battery Packs• Remote Alarm Outputs• UV Stabilized Housing forOutdoor Applications18www.haywardflowcontrol.com • 1.888.429.4635

LHB Series Manual Limit SwitchFoR Ball ValVeS UP to 6" and BUtteRFly ValVeS UP to 8"key FeatUReS• GFPP Body, Cover and Plate• 304 Stainless Steel Stem andFPM Seals• Fits All Hayward Ball and Butterfl yValves up to 8"• Temperature Range 20°F (-7°C)to 200°F (93°C)• Two Adjustable SPDT 10 Ampat 120 VAC Switches(Open/Close Position)• Integral Lockout• 1/2" Conduit Port• Terminal Blocks for Ease of Wiring• Meets ISO 5211• NEMA 4X• Switches CSA Listed• Patent PendingoPtionS• Additional Two Switches• Potentiometer Available• Optional Handles – Lever or T-Handle• LED for Open/Close IndicationActuAtion And controlsSELECTION CHARTManUal liMitSwitCh ModelLHB-1LHB-2ValVeSize/SeRieS1/2 " – 2" TB • 1-1/2 " – 4" BY2 -1/2" – 6" TB • 6" – 8" BYCAT 1000 ®aUtoMated ph ContRolleRkey FeatUReS• Advanced Microprocessor-Based Design• Factory-Assembled on PVC Backboard with Flow Cell and Flow Sensor• Long-life, Low-Maintenance Sensors• Can be Combined with CAT CO 2 System or Pump/Tank Combo for aComplete pH Automation SystemSPECIFICATIONSdiSPlay Range: ........................................... pH ....... 0.0 – 9.9SetPoint Range: ........................................ pH ....... 7.0 – 8.0deFaUlt Setting: ....................................... pH ....... 7.5CaliBRation Range: .................................. pH ....... 2.0 pH +/–ContRol aCCURaCy: ................................. pH ....... 0.1 pHMode SeleCtion: ................................ pH Feed ....... Auto/Off/ManualpH Selection ....... Acid/BasepH Mode ....... Auto/Set/CalibrateSaFety SySteM: .......................................... pH ....... Audible and Visual AlarmsController Unit ....... Diagnostic Self TestRequired ....... Flow SensorOptional ....... Remote Alarmph SenSoR: ................................ Casing Material ....... Molded ABSJunction Type ....... PTFE ReferenceWet End ....... 1/2" NPTConnector ....... Shielded BNCPoweR inPUt: ....................................120/240 Volt AC, 10 AMP 50/60 HzoUtPUtS: ............................................... pH Feed ....... 4 Amp / 120 VAC4 Amp / 240 VAC1 Amp / Dry Contact1 Amp / Dry ContactRemote Alarm ....... 1 Amp / Dry ContactoPtionaleQUiPMent: ........................................ Chemical and Acid Feed Systems1A2 year warranty on sensors1.888.429.4635 • www.haywardflowcontrol.com1B19

CAT 2000 ®aUtoMated wateR CheMiStRy ContRolleRkey FeatUReS• CAT 2000 Controller – Pre-Mounted• Flow Cell with Flow Sensor –Pre-Mounted• PVC Back-Board with Pre-DrilledInstallation Holes• pH and ORP Professional SeriesSensors• 30 Feet of 3/8" Flex Tubing• 2-1/4" NPT Speed Fit Connections• Simple Installation, Set Upand Operation• Compatible with All Types ofChemical Feed Equipment• Long-Life, Low Maintenance 2-YearWarranty SensorsSPECIFICATIONS pH / ORP SERIESDisplay / Display Range Light-Emitting Diode pH 1.0 – 9.9 / ORP 5 – 995 mVFlow Cell / Backboard Machined Acrylic CNC Machined and Beveled PVCFlow Sensor Rotary Flow Sensor – Magnetic Embedded Reed Switch Pressure Sensor (Optional)Power Input USA – 15 Amp, 120 VAC 60 Hz Intl. – 10 Amp, 230 VAC 50/60 HzOutput Power pH / ORP Relays – 4 Amp, 120/230 VAC AUX pH / ORP Relays – Dry Contacts – 4 AmpCommunication Output RS232 Serial Interface Remote Alarm – Dry Contact Relay – 4 AmpCAT Professional Series pH SensorCAT Professional Series ORP SensorInputsCAT Magnetic Rotary – Flow SensorCAT Magnetic Float – Flow SensorThermal Printer / Data Logger2 – Lead Low-Voltage Cable (For Use with Chlorine Generators)pH Acid FeedpH Base FeedOutputsORP Sanitizer FeedChlorine Generation InterfaceRemote AlarmData Output through RS232Set Point Range pH 7.0 – 8.0 ORP – 200 – 995 mVControl Accuracy pH +/– 0.1 pH ORP +/– 5.0 mVAlarm Ranges pH – Low 6.0 pH / High 9.0 pH ORP Low 200 mV / High 995 mVpH Automatic / Off / Manual for 30 Minute Direct Feed ORP Automatic / Off / Manual for 30 Minute Direct FeedMode SelectionspH Feed – Acid or BaseORP Mode – Auto / SetpH Mode – Auto / Set / CalibratepH High or Low – Audible Visual / Safeguard Alarms ORP High or Low – Audible Visual / Safeguard AlarmsSafety SystempH Overfeed Timer – Audible Visual / Safeguard Alarms ORP Overfeed Timer – Audible Visual / Safeguard AlarmspH Priority Control – Audible Visual / Safeguard AlarmsController Unit Diagnostic Self TestFlow Sensor - No Flow – Audible Visual / Safeguard AlarmsMachined Acrylic Flow CellInjection Molded Flow Cell with Integral Baffl esRS232 Serial Interface Cable2 – Lead Low-Voltage CableOptional Equipment / AccessoriesThermal Printer / Data LoggerCO 2 Feed Systems (pH Control)Peristatic Pumps (for pH or Sanitizer Control)Solution Vats (Chemical Storage)Cat Professional Series pH SensorCAT Professional Series ORP Sensor20www.haywardflowcontrol.com • 1.888.429.4635

BFAS Series Bulkhead Fittings – Standard Flange1/2" to 3" PVC, CPVC and PPkey FeatUReS• PVC, CPVC and PP• FPM or EPDM Gasket Seal• Left-Hand Threads• Buttress Threads ProtectAgainst Blowout• Hex Body For One-Person Installation• Rated at 150 PSIoPtionS• Vacuum Breaker• Ready Flanges (for MakingFlanged Connections to Tanks)• Tank-Tite SELECTION CHARTBFA Series Bulkhead Fittings – Standard Flange1/2" to 6" PVC, CPVC and PP – long PatteRnkey FeatUReS• PVC, CPVC and PP• Extra Long Design forThick Tank Walls• Left-Hand Threads• Rated at 150 PSI• FPM or EPDM Gasket Seal• Hex Body for One-Person Installation• Full Buttress ThreadsSize1/2" – 3"(DN15 – DN80)SELECTION CHARTSize1/2" – 6"(DN15 – DN150)MateRialPVCCPVCPPMateRialPVCCPVCPPendConneCtionSocket x ThreadThread x ThreadSocket x ThreadThread x ThreadendConneCtionSocket x SocketSocket x ThreadThread x ThreadThread x ThreadSealSFPM orEPDMSealSFPM orEPDMPReSSUReRating150 PSI @ 70°FNon-ShockPReSSUReRating150 PSI @ 70°FNon-ShockBulKHeAd FittinGs And AccessoriesoPtionS• Vacuum Breaker• Ready Flanges (for MakingFlanged Connections to Tanks)• Tank-TiteBFA Series Bulkhead Fittings – Oversized Flange1/2" to 1" PVC, CPVC and PP – long PatteRnkey FeatUReS• PVC, CPVC and PP• Oversized Flange Base• Extra Long Design forThick Tank Walls• Left-Hand Threads• Rated at 150 PSI• FPM or EPDM Gasket Seal• Hex Body for One-Person Installation• Full Buttress ThreadsSELECTION CHARTSize1/2" – 1"(DN15 – DN25)MateRialPVCCPVCPPendConneCtionSocket x SocketSocket x ThreadThread x ThreadThread x ThreadSealSFPM orEPDMPReSSUReRating150 PSI @ 70°FNon-ShockoPtionS• Ready Flanges (for Making FlangedConnections to Tanks)• Tank-Tite1A1.888.429.4635 • www.haywardflowcontrol.com1B21

CCP Series Tank-Tite 1/2" to 3" PVCkey FeatUReS• Robust PVC Upper andLower Body Construction• 17-7 PH Stainless Steel Wave Spring• Rated to 150 PSI• Fits with Hayward BFAS/BFASeries Bulkhead Fittings• Can be Used with AllBulkhead Fitting MaterialsMateRialS• PVC Cell Class 12454 perASTM D1784• 17-7 PH Stainless SteelA revolutionary and patent pending designed PVC compression fi tting that provides aconstant load on the gasket of the bulkhead fi tting to overcome, and compensate for,tank wall expansion/contraction in thickness due to changes in temperature and/orpressure within the tank. The Tank-Tite also imparts at the same time a constant loadon the bulkhead fi tting nut that reduces the possibility of loosening of the nut dueto vibration within the system.SELECTION CHARTSize MateRial SPRing1/2" – 3"(DN15 – DN80)PVC17-7 PH SSTLPReSSUReRating150 PSI @ 70°FNon-ShockSF Series Self-Aligning Bulkhead Fittings1", 2" and 3" PVCkey FeatUReS• PVC• Enables Easy Piping Connectionsto Domed Tanks• Swivel Ball Connection Corrects forCurved Tanks• Enables Straight Pipe Connectionsup to 27° of Offset Angle• PTFE Ball Seal• FPM or EPDM Gasket SealSELECTION CHARTSize1", 2" and 3"(DN25, DN50and DN80)MateRialendConneCtionSealSPVC Thread x Thread FPM or EPDMPReSSUReRating75 PSI @ 70°FNon-ShockAR Series Air Release Valves3/4" PVC Body with PP Ballkey FeatUReS• PVC Body with PP Ball• Reliable Tank Air Venting• Prevents Tank Overfl ow• Hollow, Floating Ball Design• Closes at 0 PSI• FPM or EPDM Seals• Standard ScreenSELECTION CHARTSize3/4"(DN20)MateRialPVC BodyPP BallendConneCtionSocket andThreadedSealSFPMPReSSUReRating150 PSI @ 70°FNon-Shock22www.haywardflowcontrol.com • 1.888.429.4635

VB Series Vacuum Breakers3/4" PVCkey FeatUReS• PVC Body• Reliable Venting of Tanksand Piping Systems• Advanced Design for Fast Draining• Easy Installation• Compact• No Metal Parts to Stick or Jam• FPM Membrane• Use with BFAS/BFA Series BulkheadFitting to Vent Tanks (Fits 1-1/2" Only)BVX Series Ready Flanges1" to 4" PVC, CPVC and gFPPkey FeatUReS• PVC, CPVC and GFPP• One-Piece Construction• Integral Molded Nipple• Eliminates the Need for an ExtraFabricated Joint – Preventing aPossible Leak Path• Easily Converts SocketValves to Flanged• ANSI Class 150 Bolt PatternSELECTION CHARTSize MateRial SealS3/4" *(DN20)* NPT ConnectionPVCSELECTION CHARTSize1" – 4"(DN25 – DN100)1" – 4"(DN25 – DN100)MateRialPVC and CPVCGFPPFPMendConneCtionSpigot x FlangedThreaded x FlangedPReSSUReRating75 PSI @ 70°FNon-ShockPReSSUReRating150 PSI @ 70°FNon-ShockBulKHeAd FittinGs And AccessoriesoPtionS• Threaded to FlangedGG Series Gauge Guards1/4" x 1/4" and 1/4" x 1/2" PVC, CPVC, PP and PVdFkey FeatUReS• PVC, CPVC, PP and PVDF• Threaded NPT Connections• FPM Membrane• All Thermoplastic, No Rustor Corrosion• No Metal Fasteners• Rugged, Low Profi le,Compact Design• Work in Any Position• Large Volume GaugeGuard AvailableoPtionS• 0 to 30 PSI Gauge• 0 to 60 PSI Gauge• 0 to 160 PSI Gauge• 0 to 160 PSI SS Liquid Filled1AGauge and Liquid DampedSELECTION CHARTSize1/4" x 1/4"(DN8 – DN8)1/4" x 1/2"(DN8 – DN15)MateRialPVC, CPVCor PPPVC, CPVCor PVDFendConneCtionThreadedSealSFPMPReSSUReRating150 PSI @ 70°FNon-Shock1.888.429.4635 • www.haywardflowcontrol.com1B23

SB Series SimplexBasket Strainers1/2" to 4" PVC, CPVC and eaStaR ®key FeatUReS• PVC, CPVC and Eastar• True Union• Ergonomic Hand-Removable Cover• In-Line or Loop Connections• External Cover Threads• Integral Flat Mounting Bases• PVC or CPVCBaskets Standard• NSF / ANSI 61 ListedoPtionS• Stainless Steel, Monel ® , Hastelloy ®and Titanium Strainer Baskets• Pressure Differential Gaugeand Switch• Baskets Available withPerforated or Mesh LinersSELECTION CHARTSizeMateRialendConneCtionSealSPReSSUReRatingPVC and CPVC1/2" – 4"(DN15 – DN100)1/2" – 4"(DN15 – DN100)PVC, CPVCand GFPPEastar** End Connections and assembly nuts are PVCSocket, Threadedor FlangedFPM orEPDM150 PSI @ 70°FNon-Shock100 PSI @ 70°FNon-ShockSB Series SimplexBasket Strainers6" to 8" PVC and CPVCkey FeatUReS• PVC and CPVC• Ergonomic Hand-Removable Cover• In-Line or Loop Connections• External Cover Threads• Integral Flat Mounting Bases• PVC or CPVCBaskets StandardoPtionS• Stainless Steel, Monel, Hastelloyand Titanium Strainer Baskets• Pressure Differential Gaugeand Switch• Baskets Available withPerforated or Mesh LinersSELECTION CHARTSizeMateRialendConneCtionSealSPReSSUReRating6" – 8"(DN150 – DN200)PVC or CPVCFlangedFPM orEPDM150 PSI @ 70°FNon-Shock24www.haywardflowcontrol.com • 1.888.429.4635

DB Series DuplexBasket Strainers1/2" to 4" PVC, CPVC and eaStaRkey FeatUReS• PVC, CPVC and Eastar• Ergonomic Hand-Removable Cover• Uninterrupted Flow• No System Shutdown forBasket Cleaning• In-Line or Loop Piping• Integral Flat Mounting Bases• External Cover Threads• Hand Removable Vents on Covers• Hand Removable Drains on Bodies• Liquid Displacing CoversSELECTION CHARToPtionS• Stainless Steel, Monel, Hastelloyand Titanium Strainer Baskets• Pressure Differential Gaugeand Switch• Pneumatic or ElectricValve AutomationstrAiners And FiltersSizeMateRialendConneCtionSealSPReSSUReRating1/2" – 4"(DN15 – DN100)1/2" – 4"(DN15 – DN100)PVC, CPVCand GFPPEastar*Socket, Threadedor FlangedFPM orEPDM150 PSI @ 70°FNon-Shock100 PSI @ 70°FNon-Shock* End Connections and assembly nuts are PVCDB Series DuplexBasket Strainers6" to 8" PVC and CPVCkey FeatUReS• PVC and CPVC• Ergonomic Hand-Removable Cover• Uninterrupted Flow• No System Shutdown forBasket Cleaning• In-Line or Loop Piping• Integral Flat Mounting Bases• External Cover Threads• Hand Removable Vents on Covers• Hand Removable Drains on Bodies• Liquid Displacing CoversoPtionS• Stainless Steel, Monel, Hastelloyand Titanium Strainer Baskets• Pressure Differential Gaugeand Switch• Pneumatic or ElectricValve AutomationSELECTION CHARTSizeMateRialendConneCtionSealSPReSSUReRating6"– 8"(DN150 – DN200)PVC or CPVCFlangedFPM orEPDM150 PSI @ 70°FNon-Shock1A1.888.429.4635 • www.haywardflowcontrol.com1B25

YS Series Y-Strainers1/2" to 4" PVC, CleaR PVC and CPVCkey FeatUReS• PVC, Clear PVC and CPVC• Horizontal or Vertical Installation• FPM O-Ring Seals• 2:1 Open Area Ratio• Hex Cap for Easy Access to Screen• Standard Screen Has 1/32" PerforationoPtionS• Stainless Steel Perf or Mesh StrainerScreens Available in Various Sizes• True Union Connection• EPDM O-RingsSELECTION CHARTSizeMateRialendConneCtionSealSPReSSUReRating1/2" – 4"(DN15 – DN100)1/2" – 2"(DN15 – DN50)PVC or CPVCClear PVCSocket, Threaded,Flanged orTrue UnionFPM andEPDM150 PSI @ 70°FNon-ShockHCF SeriesSiMPleX Media FilteR SySteMkey FeatUReS• FRP Gel Coated Body• Tool-Free 9" Twist Lock /Thread-Free Dome Lid• EPDM Seals and O-Rings• Robust 360° Slotted Laterals forFiltration and Backwash• 2" Bottom Media Drain with 3/8"Integral Water Drain and Media Screen• NSF/ANSI 50 ListedVeSSel ChaRaCteRiStiCS• Maximum Pressure of 50 PSI• Maximum Water Temperature of 122°F• Flow Rate of 95 GPM (HCF302) /135 GPM (HCF362/3)• Silica Sand or Synthetic Media(User Supplied)• PVC or PP Diffuser / Lateral, Pipingand Connections• Infl uent and Effl uent Bulkhead PortsoPtionS• Duplex or Multi-Plex Units AvailableSELECTION CHARTSizeHCF302 /30"HCF362 /36"HCF 363 /36"MateRialFRP – GelCoatedendConneCtionThreaded, Socketor Flanged** All fl anged valves are rated to 150 PSI @ 70°F Non-ShockConneCtionSize2"SealSEPDMFlowRate3" 135 GPMPReSSUReRating95 GPM 50 PSI @ 70°FNon-Shock26www.haywardflowcontrol.com • 1.888.429.4635

FLT SeriesSimplex Bag FiltersSingle and doUBle lengthkey FeatUReS• PVC, CPVC, PP or PVDF• Hand-Removable Cover• Integral Mounting Base• In-Line or Loop Flow• Vent Valve on Cover• Single and Double LengthSELECTION CHARTSizeSingle Length7" x 16"2.5 sq ftDouble Length7" x 32"4.4 sq ftMateRialPVCCPVCPPPVCCPVCPPPVDFoPtionS• Vent Gauge with Gauge Guard• Pressure Differential Gauge• Pressure Differential Switch• Flanged ConnectionsPiPingConneCtion SealS FlowRate2" True Union2" Threadedor Flanged2" True Union2" Threadedor FlangedFPM orEPDM50 GPM(clean bag)100 GPM(clean bag)PReSSUReRating150 PSI@ 70°FNon-Shock150 PSI@ 70°FNon-Shock100 PSI@ 70°FNon-ShockstrAiners And FiltersFLT SeriesDuplex Bag FiltersSingle and doUBle lengthkey FeatUReS• PVC, CPVC or PP Housing with PVCor CPVC Valve Assembly• Two Simplex Bag Filters Linked with aCustom Valve Assembly• No Line Shutdown for Bag Changeout• Built-In Mounting Platform• In-Line or Loop Flow• Stainless Steel HardwareSELECTION CHARToPtionS• Vent Gauge with Gauge Guard• Pressure Differential Gauges• Pressure Differential Switches• Pneumatic or Electric AutomatedValve OperationSizeMateRialPiPingConneCtion SealS FlowRatePReSSUReRatingSingle Length7" x 16"2.5 sq ftDouble Length7" x 32"4.4 sq ftPVCCPVCPPPVCCPVCPPPVDF2" True Union2" Threadedor Flanged2" True Union2" Threadedor FlangedFPM orEPDM50 GPM(clean bag)100 GPM(clean bag)150 PSI@ 70°FNon-Shock150 PSI@ 70°FNon-Shock100 PSI@ 70°FNon-Shock1A1.888.429.4635 • www.haywardflowcontrol.com1B27

CFLT Series 4200Simplex Cartridge FiltersPP oR PVdF (SeRieS 5200)key FeatUReS• PP or PVDF Housing• No Rust, Corrosion or Contamination• Rated to 150 PSI• In-Line or Loop Flow• Hand-Removable Cover• Simplex or Duplex DesignsCaRtRidge tyPeS• Hayward ® HC 16" cellulose nominallyrated 5 and 25 microns• Hayward PF 20" and 30" PPabsolutely rated at 1, 5 or 10 micronsSELECTION CHARThoUSinghCCaRtRidgeMaXFlow RatePFCaRtRidgeMaXFlow RateCFLT4201 One 16" 50 GPM N/A N/ACFLT4202 Two 16" 100 GPM Five 30" 100 GPMCFLT4203 N/A N/A Five 20" 50 GPMHeavy-Duty Filter BagsPP Felt oR MeSh1 to 800 MiCRon RatingSYour fi ltration process is only as effective as your fi lter bag. Don’t compromise it withanything less than a Hayward precision quality fi lter bag that’s guaranteed to fi t yourHayward fi lter vessel.key FeatUReS• Thermoplastic Ring Seal• Heavy Duty Sewn orWelded Construction• Silicone-FreeoPtionS• Custom Filter Bags forMost Any ApplicationSELECTION CHARTMateRialConStRUCtionSealMateRial/tyPeMiCRon RatingSPP Needle Felt Welded PP SENTINEL ® 1, 5, 10, 25, 50,100, 200PP Needle Felt Sewn PP SNAP-RING 1, 5, 10, 25, 50,100, 200PP Mesh Sewn PP SNAP-RING 400, 600, 80028www.haywardflowcontrol.com • 1.888.429.4635

HCP Series Single SpeedCentrifugal Pumpskey FeatUReS• Self Priming Pump• Corrosion Resistant• High Capacity Integrated Strainer• Suitable for High Volume Pumping• Clear Basket Strainer Lid forVisual Inspection• Elevated Base Ensures BetterVentilation and Protectionfrom Flooding• NSF / ANSI 50 ListedSPECIFICATIONSChaRaCteRiStiCS• Maximum Water Temperature 122°F• Working Pressure of 40 PSI• Closed Impeller Design• Glass-Reinforced Noryl ® Impellerand Pump Head• Clear Polycarbonate Filter Cover• Polypropylene Basket• 4" Socket Union Suction andDischarge Post• Nitrile Seals and O-RingsPUMP: ......................................................Noryl ® and PP ConstructionPiPe ConneCtionS: ............................4" Socket True UnionShaFt:.....................................................416 Stainless SteelSeal: ....................................................... Mechanical SealPeRFoRManCe: ....................................Flow rates from 25 to 650 GPM withTDH’s up to 95 feetMotoRS: ................................................230/460 Three-Phase Mains PowerModelS with hP RatingS: ...............HCP55-5.5, HCP 75-7.5, HCP100-10.0,HCP125-12.5corrosion resistAnt pumpsWebster C SeriesCentrifugal Pumps1/3, 1 and 1-1/2 hPkey FeatUReS• Rugged Design for DemandingContinuous Duty Service• No Metal in Contact withProcess Fluid• Carbon / Ceramic Seals• FPM ElastomersoPtionS• Impeller Trim Variations• PTFE / Ceramic Seals• PTFE / Carpenter 20 Seals• EPDM Elastomers• Waterfl ushed Seals• 575V Motors• Washdown MotorsSELECTION CHARTPUMP: ......................................................CPVC, GFPP or PVDF ConstructionPiPe ConneCtionS: ............................ThreadedShaFt:.....................................................Stainless Steel with Non-Metallic SleeveSeal: ....................................................... John Crane External Type 21 or EqualCarbon/Ceramic Seal Faces with StainlessSteel Hardware and FPM ElastomersPeRFoRManCe: .................................... Flow rates from 5 to 83 GPM with TDH’sup to 70 feetMotoRS: ................................................ Single or Three Phase Motors; HP Ratingsof 1/3, 1, 1-1/2; 115/230 VAC or208-230/460 VACModelS with hP RatingS: ...............C5 1/3, C7 1, C8 1-1/21A1.888.429.4635 • www.haywardflowcontrol.com1B29

Webster D Series VerticalSeal-Less Immersible Pumps1/8 hPkey FeatUReS• CPVC, Natural PP and PVDF• No Seals to Leak or Replace• PTFE Fume Barrier• FPM Elastomer• Optional Inlet ScreensoPtionS• In-Tank Filtration• Inlet Screens• EPDM Elastomer• Impeller Trim Variations• Explosion Proof Motors• Washdown Motors• 575V Motors• S-J Type Electrical CordSPECIFICATIONSPUMP: ...................................................CPVC, PP or PVDF ConstructionPiPe ConneCtionS: .........................Threadedo-RingS: ..............................................FPMFlow RateS: ......................................From 2 to 17 GPM with TDHs up to 18 FeetMotoRS: ............................................. Single-Phase Motor; 1/ 8 HP; 115/230 VAC,50/60 HzWebster R SeriesMagnetic Drive Pumps1/3, 1/2, 3/4, 1, 1-1/2, 2, 3 and 5 hPkey FeatUReS• GFPP and Carbon Reinforced ETFE• Low Friction Operation• Easy Maintenance, No Special Tools• Seal-Less DesignoPtionS• Carbon Bushings• Ceramic Bushings• EPDM O-Rings• 575V Motors• Explosion Proof Motors• Washdown MotorsSPECIFICATIONSPUMP: .................................................GFPP or ETFE ConstructionPiPe ConneCtionS: ....................... Threaded NPT or Flanged ANSI 150#ShaFt:................................................ Large Diameter, Ceramic with PTFE,Impeller BushingPeRFoRManCe: ............................... Flow Rates from 5 to 140 GPM with TDHsof up to 141 FeetMotoRS: ........................................... Single or Three Phase Motors; HP Ratings of1/3, 1/2, 3/4, 1,1-1/2, 2, 3, or 5 HP; 115/230VAC or 208-230/460 VAC, 50/60 HzModelS with hP RatingS: .......... RC03 1/3, RX05 1/2, RX07 3/4, RX10 1,RX15 1-1/2, RX20 2, RX30 3, RX50 530www.haywardflowcontrol.com • 1.888.429.4635

Webster S Series VerticalSeal-Less Immersible Pumps1/3, 1/2, 3/4, 1, 1-1/2, 3 and 5 HPKEY FEATURES• Heavy Duty Design for ContinuousDuty Service• Seal-Less Designspecificationsoptions• Optional Inlet Screen andExtended Shaft• In-Tank Filtration• CPVC Inlet Screens• Extended Shafts• Impeller Trim Variations• Explosion Proof Motors• Washdown Motors• 575V Motors• EPDM O-Rings• S-J Type Electrical Cordcorrosion resistant pumpspump:.................................................CPVC (1/8 – 5 HP), Nat. PP (1/8 HP Only),GFPP (1/3 – 1-1/2 HP), PVDF (1/8 – 1-1/2 HP)pipe connections:........................Threaded NPTFume Barrier:................................PTFE, Protects Motor and Bearings fromCorrosion DamageO-Rings:............................................FPMPerformance:................................Flow Rates from 5 to 130 GPM with TDHsup to 115 FeetMotors:............................................Single or Three Phase Motors; HP Ratings of1/15, 1/3, 1/2, 3/4, 1, 1-1/2, 3 and 5HPmodels with hp ratings:..........S1 1/15, S2 1/3, S4 1/2, S5 3/4, SS6 3/4,SS7 1, S8 1-1/2, S12 3, S16 5 HPWebster In-TankFiltration Systemscompatible with D and S SeriesImmersible PumpsThese highly efficient filtration systems are compatible withD and S Series Immersible Pumps.key FEATURES• CPVC Corrosion-Resistant Construction• Compact and Easy to Install• Seal-Less, Bearing-Free Pump• Fast Filter Change• 1/15 HP Model Features aBuilt-in Power CordOptions• Double Filter1A1.888.429.4635 • WWW.HAYWARDFLOWCONTROL.COM1B31

FLT Series Cartridge Filters10", 20" and 30"PVC oR CPVCkey FeatUReS• PVC or CPVC construction• FPM O-Ring Cover Seals• Hand-Removable Cover• Choice of Pleated or WoundFilter Cartridges• Integral, Plugged Tap on Cover forEasy Bleeding of The Filter• Optional Base for Mounting to Flooror Work SurfaceoPtionSFor 1 to 100 Micron Filtrationin the Following Industries:• Water Treatment• Plating• Electronics• Photo Processing• Pollution Control• Chemical ProcessingOperating Temperature/Pressurefor Bag and CartridgeFilter HousingsPressure Loss CalculationUsing Cv FactorPRESSURE LOSS CALCULATION FORMULAQ∆P =[ ]Cv∆P = Pressure DropQ = Flow in GPMCv = Flow Coefficient2The pressure loss across a valve or fi lter can be calculated using the system’sfl ow rate and the Cv factor for that valve or fi lter. For example, a 1" valve with aCv factor of 8 will have a 4 PSI pressure loss in a system with a 16 GPM fl owrate (16 ÷ 8) 2 = 4Notes:1. Working pressure (non-shock) fi gures are the maximum recommended for the indicated pressure.2. It is recommended that the minimum process fl uid temperature for the Hayward productnot fall below 34°F.32www.haywardflowcontrol.com • 1.888.429.4635

Operating Temperature/Pressurefor 150 PSI Rated Products(eXCePt FilteR hoUSingS)Operating Temperature/Pressurefor 235 PSI Rated ProductstecHnicAl inFormAtionOperating Temperature/Pressure for 250 PSI Rated ProductsNSF / ANSI Standard 61 is a standard defi ning the requirementsfor products that are destined for use in drinking water systems. Insummary, the standard requires immersion testing of all productsthat will come into contact with drinking water for any elements(i.e., lead, mercury, cadmium, etc.) that may leach into the waterthat passes through the product. Many of Hayward’s standard products underwenttesting to this standard in 2007, and are now NSF listed products.NSF / ANSI Standard 50 provides a comprehensive product evaluation forhealth effects safety, performance validation, and safety for factors such asburst, sustained pressure, cyclic pressure, head loss, UV resistance, tensilestrength, impact and load testing, turbidity reduction, fi ltration effi cacy, bacterialdisinfection effi cacy, cyst inactivation, durability or life testing, chemical resistance,corrosion resistance, and electrical safety. This applies to various fi lter mediadiatomite and other pre-coat media fi lters, granular media fi lters, cartridge fi lters,skimmers, pumps, valves, suction fi ttings or other equipment that may be usedin pools, spas and other recreational water facilities.Hayward’s products that are NSF 61 and NSF 50 listed can easily be found on theNSF website, www.NSF.org.– Eastar is a registered trademark of Eastman.– Hastelloy is a registered trademark of Haynes International, Inc.– Monel is a registered trademark of Special Metals Corporation.– Noryl is a registered trademark of Sabic Innovative Plastics.– Santoprene is a registered trademark of Advanced Elastomer Systems.– SENTINEL is a registered trademark and SNAP-RING is a trademarkof Eaton Filtration.Copyright © 2011 Hayward Industries Inc. All Rights Reserved.Revised edition 05/11. Printed in U.S.A.1A1.888.429.4635 • www.haywardflowcontrol.com1B33

34www.haywardflowcontrol.com • 1.888.429.4635

notes1A1B1.888.429.4635 • www.haywardflowcontrol.com 35

TREPAPR OVE DQ U ALITYLT UCAT 1000, CAT 2000 and Hayward are registered trademarks and Profi le2,QIC2, Stopcock and Tank-Tite are trademarks of Hayward Industries, Inc.© 2011 Hayward Industries, Inc.APG-051118779SA051711KVContact Hayward Flow Control with questions: 1-888-429-4635 • Fax: 1-888-778-8410 • One Hayward Industrial Drive • Clemmons, NC 27012 • USAVisit us at: www.haywardflowcontrol.com • E-mail: hflow@haywardnet.com