ALTRAD BarOmix COMMODORE 5/3½, 7/5 & 10/7 ... - Carey Tool

Commodore 5. OPERATION 5-1Fig 5.1.1 DrumDrum mouthFig 5.1.2 Engine Oil level (Yanmar)Dip stick5.1 Pre-Work Checks5.1.1 Check machine is level, secure frommovement and stable.5.1.2 Grip handwheel, pull back handwheellock and turn handwheel with both hands tocheck swing of drum.CAUTION! Weight of drum may causehandwheel to turn rapidly if not grippedfirmly.5.1.3 Lower drum until spout is accessibleand inspect inside for cleanliness (fig 5.1.1).5.1.4 Turn and release handwheel lock tolock drum in position.5.1.5 Remove any loose material and dustfrom around engine.5.1.4 Check engine oil level (fig 5.1.2)(See also power unit instructions).5.1.6 Check work area.5.1.7 Check ALL safety procedures havebeen followed.5.2 Starting MachineFig 5.2. Engine Start (Yanmar)Start ButtonThrottle LeverCAUTION! Power unit may bedifferent from version shown. Before use,read instructions for engine or motor,familiarize, and practice start and stopoperations.5.2.1 Check all other personnel are clearof machine.5.2.2 Check that handwheel lock issecure.5.2.3 Check drum is emptyYanmar engine with electric start (fig5.2) (Refer to engine instructions)5.2.4 Set throttle lever to RUN position.5.2.5 Press green electric START button.5.2.6 Lower engine cover.A recoil start is fitted for use in event ofelectrical failure.Fig 5.3 Lister engineHandleCrankshaftLister engineLocate starting handle and refer to engineinstructions. Always replace handlesecurely in correct place and covercrankshaft.CAUTION! The drum will start to turnas soon as the engine starts. Do not touchor lean on rotating drum.©ALTRAD BarOmix 5-1 08/05