Complete catalogue roller shutter automation - Becker-Antriebe ...

More documents

Recommendations

Info

Information for dealersThe right drive forevery applicationWhen fixed stops are used at the top, drives withelectronic limit switching automatically detect theupper limit position.When fixed stops are used at the bottom, driveswith electronic limit switching automatically detectthe lower limit position, depending on the drivetype, when fixed shaft connectors and/or flexiblesprings are used.If fixed stops are not used at the bottom and/or thetop, the limit position points can be programmedfreely. Depending on the type of the drive, this isdone easily with a set screw or button on the drivehead, programming unit or transmitter.EElectronic limit868,3 MHzswitching –integrated radio receiverThe transmitter is quickly and easily programmed intwo steps. Assigning the correct direction of rotationto the UP and DOWN buttons on the transmitteris conveniently done by a switch on the drive head.Master-slave principle:The master transmitter refers to the very first transmitterprogrammed in a receiver. In contrast tosubsequently programmed transmitters, the mastertransmitter enables, among other things, thesetting of limit positions and the programming ordeleting of further transmitters. Any transmitter thathas separate UP, STOP, DOWN buttons and a programmingbutton can be a master transmitter.Master transmitter15 additional transmittersAutomatic detectionof anti-lifting devicesRoller shutter drives with this function (“+” types)automatically detect whether a fixed shaft connectoror an anti-lifting device has been fitted insteadof a flexible suspension spring. As a result of theautomatic increase in the switch-off torque in thebottom limit position, it becomes more difficult toraise the curtain.Special, time-consuming adjustments to the driveare not necessary, as this function is performedunobtrusively, “in the background”, during installationof the drive.3xIntelligentinstallation managementDrives with this function do not store the limit positionsuntil they have travelled to the upper andlower end positions three times. The limit positionsof jammed roller shutters can be correctedby clearing the jam and travelling on.This makes installation more reliable, and savestime since it is almost impossible for the limit positionsto be incorrectly programmed.6
Single, group and centralcontrol unit configurationSingle, group and central control unitconfiguration with a multi-channel transmitter Single master Group CentralDynamic torqueadjustmentThe running properties of a roller shutter systemchange during its lifetime as a result, for instance,of:Stiff running due to material expansionShaft bearings becoming wornDirt, dustLimit positionstatusindicator (LSI)Through a short break when travelling inthe upward and downward directions, thedrive, according to its type, indicates duringinstallation whether (or which) limit positionshave already been set. This visible aidto installation removes any confusion withlimit setting.Drives with electronic limit switching automaticallyadjust the torque in line with these changes. Thisreduces the stress on the element, and thereforelengthens the service life.Extensive readjustment work is no longer necessary.7
Page 4: This catalogue has been prepared to
Page 7: Precise limit switchingAn important
Page 11 and 12: salesSecurity throughthe use ofanti
Page 13 and 14: salesSmooth upper stopA roller shut
Page 15 and 16: Electrical limit switchingIntegr. r
Page 17 and 18: 70 78 85 108 1251.4 2.2 1.4 2.2 1.4
Page 19 and 20: Centronic control unitsRadio soluti
Page 22 and 23: Which automation system is the righ
Page 24 and 25: Plug-in Becker connecting cableNEW!
Page 27 and 28: Drives withintegratedradio receiver
Page 29 and 30: with automated rollershutter and su
Page 31 and 32: with automated rollershutter and su
Page 33 and 34: SaveEnergywith automated ro lershut
Page 35 and 36: DimensionsFunctional principle - ty
Page 47: SaveEnergywith automated ro lershut
Page 50 and 51: Roller shutter drives with mechanic
Page 56 and 57: Roller shutter drives with electron
Page 58 and 59:
Roller shutter drives with electron
Page 60 and 61:
Roller shutter drives with electron
Page 62 and 63:
Centronic wired control unitsEasyCo
Page 64 and 65:
Centronic wired control unitsFuncti
Page 68 and 69:
Electrical accessoriesRotary switch
Page 70 and 71:
Electrical accessoriesTerminal with
Page 72 and 73:
Electrical accessoriesLight sensor
Page 75 and 76:
MechanicalaccessoriesDrive adapters
Page 77 and 78:
Octagonal shaftDrive adapterRingMan
Page 79 and 80:
Profile shaftDrive adapterRingManuf
Page 81 and 82:
Round tubeDrive adapterRingManufact
Page 83 and 84:
Fasteners for drive adapterNameR7/1
Page 85 and 86:
Tube clamp for S40Item number 4930
Page 87 and 88:
Rigid quick-release connectorsRigid
Page 89 and 90:
29 mm21 mmConnecting piecesTubular
Page 91 and 92:
Mounting pin-R 4/16-10Mounting pin
Page 93 and 94:
Connecting piecesTubular drives L44
Page 95 and 96:
Box bracket-P/R 3/20Box bracket for
Page 97 and 98:
Motor bracket-P/R 3/20Motor bracket
Page 99 and 100:
Wall bracket-P/R ProfineWall bracke
Page 101 and 102:
Wall bracket-P/R plateWall bracket
Page 103 and 104:
Universal wall bracket-L 3/25Univer
Page 105 and 106:
103
Page 107 and 108:
Drives withcrank connectionHK drive
Page 109 and 110:
with automated rollershutter and su
Page 111 and 112:
Page 113 and 114:
SaveEnergywith automated ro lershut
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Round tubeDrive adapterRingManufact
Page 127 and 128:
Extension rod 330-HKExtension rod,
Page 129 and 130:
Awning bracket HK M6Awning bracket
Page 131 and 132:
Anti-unrolling devices for roller s
Page 133 and 134:
DC drivesDrivesL35/8G - XL200/2,5G
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Sales supportProduct cataloguesBroc
Page 143 and 144:
Flyer„Centronic Timers“ *with i
Page 145 and 146:
Showroom materials/OutdoorMultifunc
Page 147 and 148:
Demo boxesDemo box „Centronic-II
Page 149 and 150:
Folding ruleItem No. 4997 000 040 0
Page 151 and 152:
After accepting the service or afte
show all

Complete catalogue roller shutter automation - Becker-Antriebe ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?