T-842/1352/2012 - Central Farm Machinery Training & Testing ...

More documents

Recommendations

Info

T-842/1352/2012SWARAJ 744 XM TRACTOR – Commercial (Initial)17.1.5 Noise measurement :a) Maximum ambientnoise emitted by thetractor dB(A)EvaluativeAs per CMVR88 (R ) 82 Yesb) Maximum noise atoperator’s ear leveldB(A)EvaluativeAs per CMVR98 (R ) 94 Yes17.1.6 Amplitude of mechanical vibrations at :1) Left foot rest140 No2) Right foot rest 110 NoNon3) Seat (with driver100 microns 100 (R )Evaluative90 Yesseated)(max)4) Steering Wheel 90 Yes17.1.7 Haulage requirements :a) Gross mass of the trailers, (tones):1) Two wheelNon-- 5.0 (D) 5.0 Yes2) Four wheel Evaluative-- 6.0 (D) 6.0 Yesb) Distance travelled / litre of fuel consumption, (km/l):1) Two wheel-- 5.0 to 6.5 (D) 5.05Nonto 5.212) Four wheel Evaluative4.0 to 5.0 (D) 5.0 to6.0c) Fuel consumption (ml/km/tonne):1) Two wheel-- 30 to 40 (D) 38.38to2) Four wheelNonEvaluative -- 30 to 40 (D)39.5933.49to33.7517.1.8 Wetland cultivation :YesYesYesYesSealing for thefollowingassemblies:1) Clutchassembly2) Brakehousings3) Front axlehubsEvaluative The identifiedassemblies shouldessentially meetthe requirement of-do-IS: 11082. Nowater ingress in-do- the identifiedassembly given in-do- column-2.If tractor does notmeet the requirementsof wetlandcultivation, it maybe recommendedfor dry landoperation only.There shouldbe no ingressof waterand/or mudNo ingress ofmud and / orwater wasobservedYesCENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE,BUDNI Page 41of 47
T-842/1352/2012SWARAJ 744 XM TRACTOR – Commercial (Initial)1 2 3 4 5 6 717.1.9 Safety features :a) Guards againstAt present providedYesmoving and hot Evaluative As per CMVR nopartsrequirementb) LightingarrangementsEvaluative As per CMVR -- Provided Yes17.1.10 Labelling of tractors (Provision of labelling plate):1) Make Evaluative-- Swaraj Yes2) Model Evaluative Should conform -- 744 XM Yes3) Year of Evaluative tothe-- WW Yesmanufacturerequirements of4) Engine Evaluative CMVR alongwithdeclared-- 43.1021/SPG0725 Yesnumber8value of PTO HP5) Chassis Evaluative -- WWCG Yesnumber496061416816) Declaration Evaluative -- 30.1 (41.0) Yesof PTOpower, (kW)17.1.11 Discard limit for:(a) Cylinder borediameter, (mm)(b)(c)(d)(e)(f)(g)(h)Clearancebetween piston &cylinder liner atskirt, (mm)Ring end gap (mm):- Top comp. ring.EvaluativeNonEvaluativeTo be specifiedby themanufacturer110.225 100.03 to 100.04 Yes0.60 (D) 0.188 to 0.189 Yes-do- 1.75 0.55 to 0.60 Yes- 2 nd comp. ring. Evaluative -do- 1.75 0.45 Yes- Oil ring. -do- 1.75 0.45 YesRing groove clearance (mm):- Top comp. ring.-do- -- Tapered --- 2 nd comp. ring. Evaluative -do- 0.25 0.079 to 0.082 Yes- Oil ring. -do- 0.25 0.058 to 0.062 YesClearance of main bearings (mm):- DiametricalEvaluative To be specifiedclearancebythe- CrankshaftEvaluative manufacturerend floatClearance of big end bearings, (mm):0.30 0.126 to 0.138 Yes0.50 0.30 Yes- Diametrical Evaluative -do- 0.30 0.134 to 0.137 Yes- Axial Evaluative -do- 0.60 0.25 to 0.30 YesClearancebetween king pin Nonand bush, (mm) Evaluative-do- 0.60 0.11 to 0.13 YesClearancebetween centre pinand bush, (mm)NonEvaluative-do- 0.80 0.12 YesCENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE,BUDNI Page 42 of 47
Page 1 and 2: T-842/1352/2012SWARAJ 744 XM TRACTO
Page 3: T-842/1352/2012SWARAJ 744 XM TRACTO
Page 7 and 8: T-842/1352/2012SWARAJ 744 XM TRACTO

T-842/1352/2012 - Central Farm Machinery Training & Testing ...

Create successful ePaper yourself

Delete template?

Save as template?