Base Station Antenna - Inmak

Challange the distance withInmakthe antenna company

CONTENTS26-108 MHzAC-CB 2AC-4 3AC-4 ST 4AC50-D-O 5AC50-D3G-O 6AC50-D5G-O 7AC-8 8AC80-D 9AC80-D3G 10AC80-D5G 11AC-4F 12BA4-1G 13118-136 MHzAC-2 AIR 14ASKI 120 15AC-D AIR 16BA2-1G AIR 17134-175 MHzAC-2 18AC-2F 19AC-D 20AC-D3G 21AC-D6G 22AC-D8G 23BA2-1G 24BA2-3G 25BA2-5G 26ASKI 160 27B-2R 28BD2-3G 29BD2-6G 30300-350 MHzAC3-D 31AC3-D3G 32AC3-D6G 33AC3-D8G 34BA3-1G 35ASKI 300 36BD3-3G 37BD3-6G 38380-470 MHzAC70 39AC70-D 40AC5-3G 41AC5-5G 42AC5-7G 43AC5-10G 44AC5-12G 45BA70-1G 46BA70-3G 47BA70-5G 48BA70-7G 49ASKI 450 50BD70-3G 51BD70-6G 52820-960 MHzAC6-10G 53AC6-12G 54BA90-1G 55BA90-3G 561200 MHzAC1.2-7G 57AC1.2-11G 58BA1.2-6G 59ACP1.2-24G 602400 MHzBA2.4-6G 61BA2.4-12G 62AC2.4-11G 63ACP2.4-24G 645800 MHzBA5.8-12G 65ACP5.8-24G 66Base Station Antennas

BASE STATION ANTENNASAC-CB3-radial CB Base AntennaAC-CB is an aluminum ground-plane antenna of the triple-leg type. The antenna can be easily installed where nosoldering is required. The antenna requires no adjustment. The antenna comprises an aluminum GP-head, onealuminum radiator and three aluminum radials.specificationsTypeGROUND PLANEELECTRICALFrequency Range 26-28 MHzBand width1 MHzSWR < 1.2Gain0 dBd (2.15 dBi)Impedance50 ΩMax. Power300 WPolarizationVerticalAntistatic protection N/AConnectorUHF (female)MECHANICALLength5.5 m max.Weight1.7 kgMounting27-50 mm mast tubeMaterialaluminumWind Load150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.TYPICAL SWR CURVE2.0SWR1.51.01 MHz Frequency Bandfreq. MHz2 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC-43-radial Base Station Antenna for the 30-66 MHz BandAC-4 is an aluminum ground-plane antenna of the triple-leg type. The antenna can be easily installed where nosoldering is required. The antenna requires no adjustment. The antenna comprises an aluminum GP-head, onealuminum radiator and three aluminum radials.BASE STATION ANTENNASspecificationsTypeGROUND PLANEELECTRICALFrequency Range 30-66 MHzBand width1.5 MHzSWR < 1.2Gain0 dBd (2.15 dBi)Impedance50 ΩMax. Power300 WPolarizationVerticalAntistatic protection N/AConnectorUHF (female) or N (female)MECHANICALLength5.5 m max.Weight1.5 kgMounting27-40 mm mast tubeMaterialaluminumWind Load150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.TYPICAL SWR CURVE2.0SWR1.51.01.5 MHz Frequency Bandfreq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 3

BASE STATION ANTENNASAC-4 ST3-radial Base Station Antenna for the 30-66 MHz BandAC-4 ST is a steel ground-plane antenna of the triple-leg type. The antenna can be easily installed where nosoldering is required. The antenna requires no adjustment. The antenna comprises an aluminum GP-head, onesteel radiator and three steel radials.specificationsTypeGROUND PLANEELECTRICALFrequency Range 30-66 MHzBand width1.5 MHzSWR < 1.2Gain0 dBd (2.15 dBi)Impedance50 ΩMax. Power300 WPolarizationVerticalAntistatic protection N/AConnectorUHF (female) or N (female)MECHANICALLength5.5 m max.Weight1.6 kgMounting27-40 mm mast tubeMaterialstainless steelWind Load150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.TYPICAL SWR CURVE2.0SWR1.51.01.5 MHz Frequency Bandfreq. MHz4 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC50-D-OOpen Dipole for the 48-66 MHz BandSingle, 0 dBd open dipole incorporating a balun optimized for wide band width and accurate matching. The dipoleelement has been constructed in high quality aluminum alloys to prevent corrosion. The antenna is terminated withN (female) connector. A mast clamp is provided for mounting on 27-50 mm diameter mast tube.BASE STATION ANTENNASspecificationsTypeYAGIELECTRICALFrequency Range 48-66 MHzBand width19 MHzSWR < 1.5Gain0 dBd (2.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVertical; HorizontalAntistatic protection N/AConnectorN (female)MECHANICALMounting27-50 mm mast tubeMaterialaluminumWind Load150 km/hORDERING DESIGNATIONSTypeFrequencyAC50-D-O48-66 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+3 0 -3 -6 -9 -9 -6 -3 0 +3 +3 0 -3 -6 -9 -9 -6 -3 0 +30°270°90°SWR1.51.048 AC50-D-O 66-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 5

BASE STATION ANTENNASAC50-D3G-O2-element Yagi Antenna for the 48-66 MHz BandThis is a 2-element Yagi antenna with 3 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidth andaccurate matching. The antenna is terminated with N (female) connector. Radiating elements, supporting boomsand adjoining metal castings are constructed in high-quality-aluminum alloys to prevent corrosion. A mast clampis provided for mounting on 27-50 mm diameter mast tube.specificationsTypeYAGIELECTRICALFrequency Range 48-66 MHzBand width10 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVertical; HorizontalFront to back ratio 12 dBAntistatic protection N/AConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.8 m5 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC50-D3G-O/l 48-58 MHzAC50-D3G-O/h 56-66 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+3 0 -3 -6 -9 -9 -6 -3 0 +3 +3 0 -3 -6 -9 -9 -6 -3 0 +30°270°90°SWR1.51.04856AC50-D3G-O/lAC50-D3G-O/h5866-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz6 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC50-D5G-O3-element Yagi Antenna for the 48-66 MHz BandThis is a 3-element Yagi antenna with 5 dBd Gain. The antenna is terminated with N (female) connector. Radiatingelements, supporting booms and adjoining metal castings are constructed in high-quality-aluminum alloys toprevent corrosion. A mast clamp is provided for mounting on 27-50 mm diameter mast tube.BASE STATION ANTENNASspecificationsTypeYAGIELECTRICALFrequency Range 48-66 MHzBand width5 MHzSWR < 1.5Gain5 dBd (7.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVertical; HorizontalFront to back ratio 16 dBAntistatic protection N/AConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load2.5 m5.5 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.RADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+6 +3 0 -3 -6 -6 -3 0 +3 +6 +6 +3 0 -3 -6 -6 -3 0 +3 +60°270°90°SWR1.51.05 MHz Frequency Band-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 7

BASE STATION ANTENNASAC-83-radial Base Station Antenna for the 66-80 MHz BandAC-8 is an aluminum ground-plane antenna of the triple-leg type. The antenna can be easily installed where nosoldering is required. The antenna requires no adjustment. The antenna comprises an aluminum GP-head, onealuminum radiator and three aluminum radials.specificationsTypeGROUND PLANEELECTRICALFrequency Range 66-80 MHzBand width2 MHzSWR < 1.2Gain0 dBd (2.15 dBi)Impedance50 ΩMax. Power300 WPolarizationVerticalAntistatic protection N/AConnectorUHF (female) or N (female)MECHANICALLength2 m max.Weight1.2 kgMounting27-40 mm mast tubeMaterialaluminumWind Load150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.TYPICAL SWR CURVE2.0SWR1.51.02 MHz Frequency Bandfreq. MHz8 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC80-DCenter-Fed-Folded Dipole for the 66-85 MHz BandSingle, 0 dBd folded dipole incorporating a balun optimized for wide bandwidth and accurate matching. The entirebalun unit and feeder terminations are completely sealed in a polyethylene (PET) moulding ensuring permanentwaterproof connections. The dipole element, the supporting boom and the adjoining metal castings have beenconstructed in high quality aluminum alloys to prevent corrosion. All metal parts are DC-grounded. The antenna issupplied with clamp for mounting on 27-50 mm diameter mast tubes.BASE STATION ANTENNASspecificationsTypeDipoleELECTRICALFrequency Range 66-85 MHzBand width19 MHzSWR < 1.5Gain0 dBd (2.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVertical; HorizontalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALWeightMountingMaterialWind Load3.5 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC80-D66-85 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+3 0 -3 -6 -9 -9 -6 -3 0 +3 +3 0 -3 -6 -9 -9 -6 -3 0 +30°270°90°SWR1.51.066 AC80-D 85-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 9

BASE STATION ANTENNASAC80-D3G2-element Yagi Antenna for the 66-85 MHz BandThis is a 2-element Yagi antenna with 3 dBd Gain. The entire balun unit and feeder cable inlet are completelysealed in a polyethylene (PET) moulding ensuring permanent waterproof connections. The antenna is terminatedwith N (female) connector. Radiating elements, supporting booms and adjoining metal castings are constructed inhigh-quality-aluminum alloys to prevent corrosion. All metal parts are DC-grounded. A mast clamp is provided formounting on 27-50 mm diameter mast tube.specificationsTypeYAGIELECTRICALFrequency Range 66-85 MHzBand width10 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVertical; HorizontalFront to back ratio 12 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.8 m5 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC80-D3G/l66-76 MHzAC80-D3G/h75-85 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+3 0 -3 -6 -9 -9 -6 -3 0 +3 +3 0 -3 -6 -9 -9 -6 -3 0 +30°270°90°SWR1.51.06675AC80-D3G/lAC80-D3G/h7685-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz10 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC80-D5G3-element Yagi Antenna for the 66-85 MHz BandThis is a 3-element Yagi antenna with 5 dBd Gain. The antenna is terminated with N (female) connector. Radiatingelements, supporting booms and adjoining metal castings are constructed in high-quality-aluminum alloys toprevent corrosion. All metal parts are DC-grounded. A mast clamp is provided for mounting on 27-50 mm diametermast tube.BASE STATION ANTENNASspecificationsTypeYAGIELECTRICALFrequency Range 66-85 MHzBand width10 MHzSWR < 1.5Gain5 dBd (7.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVertical; HorizontalFront to back ratio 15 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load2.5 m5.5 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC80-D5G/l66-76 MHzAC80-D5G/h75-85 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+6 +3 0 -3 -6 -6 -3 0 +3 +6 +6 +3 0 -3 -6 -6 -3 0 +3 +60°270°90°SWR1.51.06675AC80-D5G/lAC80-D5G/h7685-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 11

BASE STATION ANTENNASAC-4FCoaxial Ground Plane Antenna for the 50-88 MHz BandAC-4F is a fiberglass ground plane antenna of the triple-leg type. The antenna comprises an aluminum GP-head,one coaxial-fiberglass radiator and three stainless-steel radials. The construction of the mount makes it possibleto lead the cable either inside or along the outside of the mast tube. AC-4F is made of high-quality materials andwill endure for years where no maintenance is required.specificationsTypeELECTRICALFrequency RangeBand widthGROUND PLANE50-88 MHz1.5 MHzSWR < 1.2GainImpedanceMax. PowerPolarizationAntistatic protectionConnectorMECHANICALLengthWeightMountingMaterialWind Load0 dBd (2.15 dBi)50 Ω300 WVerticalN/AUHF (female) or N (female)2.5 m max.3.5 kg27-50 mm mast tubeRadiator: aluminumor stainless steel in afiberglass tubeRadials: aluminum orstainless steelMounting bracket:aluminum150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.TYPICAL SWR CURVE2.0SWR1.51.01.5 MHz Frequency Bandfreq. MHz12 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

BA4-1GCoaxial Base Station Antenna with Heavy-Duty-Fiberglass Radome for the 44-88 MHz BandBA4-1G is a 0 dBd gain, omnidirectional rod-type base station antenna for the 44-88 MHz Band. BA4-1G isdesigned for mounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction of themount makes it possible to lead the cable either inside or along the outside of the mast tube. The fiberglass tubecompletely encloses the carefully designed radiating element to ensure long dependable service in all climates.The athmospherical discharges are immediately led to ground as all metal parts are DC-connected. Therefore, theantenna shows a DC-short across the coaxial cable. This antenna is used where reliability is of great importance.A long lifetime has been taken into consideration when designing this antenna – sturdy and strong.BASE STATION ANTENNASspecificationsTypeCOAXIALELECTRICALFrequency Range 44-88 MHzBand width10 MHzSWR < 1.5Gain0 dBd (2.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVerticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load3.8 m max.5.5 kg27-50 mm mast tubeRadome: fiberglassMounting bracket: epoxycoatedaluminum150 km/hORDERING DESIGNATIONSTypeFrequencyBA4-1G/l44-55 MHzBA4-1G/ml56-65 MHzBA4-1G/mh66-76 MHzBA4-1G/h77-88 MHzMULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°0 -3 -6 -9 -12 -12 -9 -6 -3 0240° 210° 180° 150° 120°90°SWR1.51.044566677BA4-1G/lBA4-1G/mlBA4-1G/mhBA4-1G/hfreq. MHz55657688For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 13

BASE STATION ANTENNASAC-2 AIR3-radial Base Station Antenna for the 118-136 MHz BandAC-2 AIR is an aluminum ground-plane antenna of the triple-leg type. The antenna can be easily installed whereno soldering is required. The antenna requires no adjustment. The antenna comprises an aluminum GP-head, onealuminum radiator and three aluminum radials.specificationsTypeGROUND PLANEELECTRICALFrequency Range 118-136 MHzBand width3 MHzSWR < 1.2Gain0 dBd (2.15 dBi)Impedance50 ΩMax. Power300 WPolarizationVerticalAntistatic protection N/AConnectorUHF (female) or N (female)MECHANICALLength1.5 m max.Weight1.2 kgMounting27-40 mm mast tubeMaterialaluminumWind Load150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.TYPICAL SWR CURVE2.0SWR1.51.03 MHz Frequency Bandfreq. MHz14 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

ASKI 120Base Station Antenna with Aluminum Radome for the 118-136 MHz BandASKI 120 is a 3 dBd gain, rod-type base station antenna for the 118-136 MHz Band. ASKI 120 is designed formounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction of the mount makesit possible to lead the cable either inside or along the outside of the mast tube. The aluminum tube completelyencloses the carefully designed radiating element to ensure long dependable service in all climates. This antennais used where reliability is of great importance. A long lifetime has been taken into consideration when designingthis antenna – sturdy and strong.BASE STATION ANTENNASspecificationsTypeASKIELECTRICALFrequency Range 118-136 MHzBand width20 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVerticalConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.7 m max.3.2 kg27-50 mm mast tubeRadome: aluminumMounting bracket:epoxy-coated aluminum150 km/hORDERING DESIGNATIONSThe antenna covers the whole frequency rangeMULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°0 -3 -6 -9 -12 -12 -9 -6 -3 090°SWR1.51.0118 ASKI 120 136240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 15

BASE STATION ANTENNASAC-D AIRCenter-Fed-Folded Dipole for the 118-136 MHz BandSingle, 0 dBd folded dipole incorporating a balun optimized for wide bandwidth and accurate matching. The entirebalun unit and feeder terminations are completely sealed in a polyethylene (PET) moulding ensuring permanentwaterproof connections. The dipole have been constructed with high-quality aluminum to prevent corrosion. Allmetal parts are DC-grounded. The antenna is supplied with clamp for mounting on 27-50 mm diameter masttubes.specificationsTypeDIPOLEELECTRICALFrequency Range 118-136 MHzBand width15 MHzSWR < 1.5Gain0 dBd (2.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVertical; HorizontalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALWeightMountingMaterialWind Load2.8 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC-D AIR/l118-130 MHzAC-D AIR/h121-136 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+3 0 -3 -6 -9 -9 -6 -3 0 +3 +3 0 -3 -6 -9 -9 -6 -3 0 +30°270°90°SWR1.51.0118121AC-D AIR/lAC-D AIR/h130136-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz16 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

BA2-1G AIRCoaxial Base Station Antenna with Heavy-Duty-Fiberglass Radome for the 118-136 MHz BandBA2-1G Air is a 0 dBd gain, omnidirectional rod-type base station antenna for the 118-136 MHz Band. BA2-1G Airis designed for mounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction ofthe mount makes it possible to lead the cable either inside or along the outside of the mast tube. The fiberglass tubecompletely encloses the carefully designed radiating element to ensure long dependable service in all climates.The athmospherical discharges are immediately led to ground as all metal parts are DC-connected. Therefore, theantenna shows a DC-short across the coaxial cable. This antenna is used where reliability is of great importance.A long lifetime has been taken into consideration when designing this antenna – sturdy and strong.BASE STATION ANTENNASspecificationsTypeCOAXIALELECTRICALFrequency Range 118-136 MHzBand width15 MHzSWR < 1.5Gain0 dBd (2.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVerticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load2.1 m max.3.6 kg27-50 mm mast tubeRadome: fiberglassMounting bracket: epoxycoatedaluminum150 km/hORDERING DESIGNATIONSTypeFrequencyBA2-1G AIR/l118-130 MHzBA2-1G AIR/h 121-136 MHzMULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°0 -3 -6 -9 -12 -12 -9 -6 -3 090°SWR1.51.0118121BA2-1G AIR/lBA2-1G AIR/h130136240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 17

AC-2FCoaxial Ground Plane Antenna for the 144-174 MHz BandAC-2F is a fiberglass ground plane antenna of the triple-leg type. The antenna comprises an aluminum GP-head,one coaxial-fiberglass radiator and three aluminum radials. The construction of the mount makes it possible tolead the cable either inside or along the outside of the mast tube. AC-2F is made of high-quality materials and willendure for years where no maintenance is required.BASE STATION ANTENNASspecificationsTypeGROUND PLANEELECTRICALFrequency Range 144-174 MHzBand width4 MHzSWR < 1.2Gain0 dBd (2.15 dBi)Impedance50 ΩMax. Power300 WPolarizationVerticalAntistatic protection N/AConnectorUHF (female) or N (female)MECHANICALLengthWeightMountingMaterialWind Load0.8 m max.2.6 kg27-50 mm mast tubeRadiator: aluminumor stainless steel in afiberglass tubeRadials: aluminum orstainless steelMounting bracket:aluminum150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.TYPICAL SWR CURVE2.0SWR1.51.04 MHz Frequency Bandfreq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 19

BASE STATION ANTENNASAC-DCenter-Fed-Folded Dipole for the 144-174 MHz BandSingle, 0 dBd folded dipole incorporating a balun optimized for wide bandwidth and accurate matching. The entirebalun unit and feeder terminations are completely sealed in a polyethylene (PET) moulding ensuring permanentwaterproof connections. The dipole have been constructed with high-quality aluminum to prevent corrosion. Allmetal parts are DC-grounded. The antenna is supplied with clamp for mounting on 27-50 mm diameter masttubes.specificationsTypeDIPOLEELECTRICALFrequency Range 144-174 MHzBand width20 MHzSWR < 1.5Gain0 dBd (2.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVertical; HorizontalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALWeightMountingMaterialWind Load2.7 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC-D/l144-164 MHzAC-D/h154-174 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+3 0 -3 -6 -9 -9 -6 -3 0 +3 +3 0 -3 -6 -9 -9 -6 -3 0 +30°270°90°SWR1.51.0144154AC-D/lAC-D/h164174-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz20 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC-D3G2-element Yagi Antenna for the 144-174 MHz Band with 3 dBd GainThis is a 2-element Yagi antenna with 3 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidthand accurate matching. The entire balun unit and feeder cable inlet are completely sealed in a polyethylene (PET)moulding ensuring permanent waterproof connections. The antenna is terminated with N (female) connector.Radiating elements, supporting booms and adjoining metal castings are constructed in high-quality-aluminumalloys to prevent corrosion. All metal parts are DC-grounded. A mast clamp is provided for mounting on 27-50 mmdiameter mast tube.BASE STATION ANTENNASspecificationsTypeYAGIELECTRICALFrequency Range 144-174 MHzBand width15 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVertical; HorizontalFront to back ratio 12 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.9 m3.6 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC-D3G/l144-160 MHzAC-D3G/h158-174 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+3 0 -3 -6 -9 -9 -6 -3 0 +3 +3 0 -3 -6 -9 -9 -6 -3 0 +30°270°90°SWR1.51.0144158AC-D3G/lAC-D3G/h160174-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 21

BASE STATION ANTENNASAC-D6G3-element Yagi Antenna for the 144-174 MHz Band with 6 dBd GainThis is a 3-element Yagi antenna with 6 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidthand accurate matching. The entire balun unit and feeder cable inlet are completely sealed in a polyethylene (PET)moulding ensuring permanent waterproof connections. The antenna is terminated with N (female) connector.Radiating elements, supporting booms and adjoining metal castings are constructed in high-quality-aluminumalloys to prevent corrosion. All metal parts are DC-grounded. A mast clamp is provided for mounting on 27-50 mmdiameter mast tube.specificationsTypeYAGIELECTRICALFrequency Range 144-174 MHzBand width15 MHzSWR < 1.5Gain6 dBd (8.15 dBd)Impedance50 ΩMax. Power150 WPolarizationVertical; HorizontalFront to back ratio 16 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.2 m4.0 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC-D6G/l144-160 MHzAC-D6G/h158-174 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+6 +3 0 -3 -6 -6 -3 0 +3 +6 +6 +3 0 -3 -6 -6 -3 0 +3 +60°270°90°SWR1.51.0144158AC-D6G/lAC-D6G/h160174-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz22 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC-D8G5-element Yagi Antenna for the 144-174 MHz Band with 8 dBd GainThis is a 5-element Yagi antenna with 8 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidthand accurate matching. The entire balun unit and feeder cable inlet are completely sealed in a polyethylene (PET)moulding ensuring permanent waterproof connections. The antenna is terminated with N (female) connector.Radiating elements, supporting booms and adjoining metal castings are constructed in high-quality-aluminumalloys to prevent corrosion. All metal parts are DC-grounded. A mast clamp is provided for mounting on 27-50 mmdiameter mast tube.BASE STATION ANTENNASspecificationsTypeYAGIELECTRICALFrequency Range 144-174 MHzBand width15 MHzSWR < 1.5Gain8 dBd (10.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVertical; HorizontalFront to back ratio 16 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.95 m4.6 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC-D8G/l144-160 MHzAC-D8G/h158-174 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+8 +6 +3 -0 -3 -3 0 +3 +6 +8 +8 +6 +3 0 -3 -3 0 +3 +6 +80°270°90°SWR1.51.0144158AC-D8G/lAC-D8G/h160174-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 23

BASE STATION ANTENNASBA2-1GCoaxial Base Station Antenna with Heavy-Duty-Fiberglass Radome for the 144-174 MHz BandBA2-1G is a 0 dBd gain, omnidirectional rod-type base station antenna for the 144-174 MHz Band. BA2-1G isdesigned for mounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction of themount makes it possible to lead the cable either inside or along the outside of the mast tube. The fiberglass tubecompletely encloses the carefully designed radiating element to ensure long dependable service in all climates.The athmospherical discharges are immediately led to ground as all metal parts are DC-connected. Therefore, theantenna shows a DC-short across the coaxial cable. This antenna is used where reliability is of great importance.A long lifetime has been taken into consideration when designing this antenna – sturdy and strong.specificationsTypeCOAXIALELECTRICALFrequency Range 144-174 MHzBand width10 MHzSWR < 1.5Gain0 dBd (2.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVerticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.92 m max.3.2 kg27-50 mm mast tubeRadome: fiberglassMounting bracket: epoxycoatedaluminum150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.MULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°0 -3 -6 -9 -12 -12 -9 -6 -3 090°SWR1.51.0144154164BA2-1G/lBA2-1G/mBA2-1G/h154164174240° 210° 180° 150° 120°freq. MHz24 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

BA2-3GOmnidirectional Base Station Antenna with Heavy-Duty-Fiberglass Radomefor the 144-174 MHz BandBA2-3G is a 3 dBd gain, omnidirectional rod-type base station antenna for the 144-174 MHz Band. BA2-3G isdesigned for mounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction of themount makes it possible to lead the cable either inside or along the outside of the mast tube. The fiberglass tubecompletely encloses the carefully designed radiating element to ensure long dependable service in all climates.The athmospherical discharges are immediately led to ground as all metal parts are DC-connected. Therefore, theantenna shows a DC-short across the coaxial cable. This antenna is used where reliability is of great importance.A long lifetime has been taken into consideration when designing this antenna – sturdy and strong.BASE STATION ANTENNASspecificationsTypeOMNIDIRECTIONALELECTRICALFrequency Range 144-174 MHzBand width5 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVerticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load2.72 m max.2.3 kg27-50 mm mast tubeRadome: fiberglassMounting bracket: epoxycoatedaluminum150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.MULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°+3 0 -3 -6 -9 -9 -6 -3 0 +390°SWR1.51.05 MHz Frequency Band240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 25

BASE STATION ANTENNASBA2-5GOmnidirectional Base Station Antenna with Heavy-Duty-Fiberglass Radomefor the 144-174 MHz BandBA2-5G is a 5 dBd gain, omnidirectional rod-type base station antenna for the 144-174 MHz Band. BA2-5G isdesigned for mounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction of themount makes it possible to lead the cable either inside or along the outside of the mast tube. The fiberglass tubecompletely encloses the carefully designed radiating element to ensure long dependable service in all climates.The athmospherical discharges are immediately led to ground as all metal parts are DC-connected. Therefore, theantenna shows a DC-short across the coaxial cable. This antenna is used where reliability is of great importance.A long lifetime has been taken into consideration when designing this antenna – sturdy and strong.specificationsTypeOMNIDIRECTIONALELECTRICALFrequency Range 144-174 MHzBand width5 MHzSWR < 1.5Gain5 dBd (7.15 dBi)Impedance50 ΩMax. Power150 WPolarizationVerticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load4.5 m max.4.2 kg27-50 mm mast tubeRadome: fiberglassMounting bracket: epoxycoatedaluminum150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.MULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°+5 +3 0 -3 -6 -6 -3 0 +3 +590°SWR1.51.05 MHz Frequency Band240° 210° 180° 150° 120°freq. MHz26 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

ASKI 160Base Station Antenna with Aluminum Radome for the 144-174 MHz BandASKI 160 is a 3 dBd gain, rod-type base station antenna for the 144-174 MHz Band. ASKI 160 is designed formounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction of the mount makesit possible to lead the cable either inside or along the outside of the mast tube. The aluminum tube completelyencloses the carefully designed radiating element to ensure long dependable service in all climates. This antennais used where reliability is of great importance. A long lifetime has been taken into consideration when designingthis antenna – sturdy and strong.BASE STATION ANTENNASspecificationsTypeASKIELECTRICALFrequency Range 144-174 MHzBand width20 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax. Power300 WPolarizationVerticalConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.55 m max.2.5 kg27-50 mm mast tubeRadome: aluminumMounting bracket:epoxy-coated aluminum150 km/hORDERING DESIGNATIONSTypeFrequencyASKI 160/l144-154 MHzASKI 160/m154-164 MHzASKI 160/h164-174 MHzMULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°0 -3 -6 -9 -12 -12 -9 -6 -3 090°SWR1.51.0144154164ASKI 160/lASKI 160/mASKI 160/h154164174240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 27

BD2-3G2-dipole Array for the 144-174 MHz BandBD2-3G is a base station antenna compounded of 2 dipoles, which give the antenna 3-dBd gain. The antenna issupplied with two cables for each dipole and a SP2-2 cable splitter, which can terminate with any kind of connector.All metal parts are DC-grounded.BASE STATION ANTENNASspecificationsTypeDIPOLE ARRAYELECTRICALFrequency Range 144-174 MHzBand width15 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax Power300 WPolarizationverticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load3.5 m10.5 kg27-50 mm mast tubeAluminum150 km/hORDERING DESIGNATIONSTypeFrequencyBD2-3G/l144-160 MHzBD2-3G/h158-174 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+3 0 -3 -6 -9 -9 -6 -3 0 +3 +3 0 -3 -6 -9 -9 -6 -3 0 +30°270°90°SWR1.51.0144158BD2-3G/lBD2-3G/h160174-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 29

BASE STATION ANTENNASBD2-6G4-dipole Array for the 144-174 MHz BandBD2-6G is a base station antenna compounded of 4 dipoles, which give the antenna 6-dBd gain. The antennais supplied with four cables for each dipole and a SP2-4 cable splitter, which can terminate with any kind ofconnector. All metal parts are DC-grounded.specificationsTypeDIPOLE ARRAYELECTRICALFrequency Range 144-174 MHzBand width15 MHzSWR < 1.5Gain6 dBd (8.15 dBi)Impedance50 ΩMax Power300 WPolarizationverticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load5.6 m25 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyBD2-6G/l144-160 MHzBD2-6G/h158-174 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+6 +3 0 -3 -6 -6 -3 0 +3 +6 +6 +3 0 -3 -6 -6 -3 0 +3 +60°270°90°SWR1.51.0144158BD2-6G/lBD2-6G/h160174-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz30 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC3-DCenter-Fed-Folded Dipole for the 300-350 MHz BandSingle, 0 dBd folded dipole incorporating a balun optimized for wide bandwidth and accurate matching. The entirebalun unit and feeder terminations are completely sealed in a polyethylene (PET) moulding ensuring permanentwaterproof connections. The dipole have been constructed with high-quality aluminum to prevent corrosion. Allmetal parts are DC-grounded. The antenna is supplied with clamp for mounting on 27-50 mm diameter masttubes.BASE STATION ANTENNASspecificationsTypeDIPOLEELECTRICALFrequency Range 300-350 MHzBand width30 MHzSWR < 1.5Gain0 dBd (2.15 dBi)Impedance50 ΩMax Power150 WPolarizationVertical; HorizontalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALWeight2.4 kgMounting27-50 mm mast tubeMaterialaluminumWind Load150 km/hORDERING DESIGNATIONSTypeFrequencyAC3-D/l300-330 MHzAC3-D/h320-350 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+3 0 -3 -6 -9 -9 -6 -3 0 +3 +3 0 -3 -6 -9 -9 -6 -3 0 +30°270°90°SWR1.51.0300320AC3-D/lAC3-D/h330350-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 31

BASE STATION ANTENNASAC3-D3G2-element Yagi Antenna for the 300-350 MHz Band with 3 dBd GainThis is a 2-element Yagi antenna with 3 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidthand accurate matching. The entire balun unit and feeder cable inlet are completely sealed in a polyethylene (PET)moulding ensuring permanent waterproof connections. The antenna is terminated with N (female) connector.Radiating elements, supporting booms and adjoining metal castings are constructed in high-quality-aluminumalloys to prevent corrosion. All metal parts are DC-grounded. A mast clamp is provided for mounting on 27-50 mmdiameter mast tube.specificationsTypeYAGIELECTRICALFrequency Range 300-350 MHzBand width15 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax Power150 WPolarizationVertical; HorizontalFront to back ratio 12 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.6 m3.0 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC3-D3G/l300-315 MHzAC3-D3G/ml312-327 MHzAC3-D3G/mh325-340 MHzAC3-D3G/h337-350 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+3 0 -3 -6 -9 -9 -6 -3 0 +3 +3 0 -3 -6 -9 -9 -6 -3 0 +30°-30° -60° -90° -60° -30°240° 210° 180° 150° 120°270°90°SWR1.51.0300312325337AC3-D3G/lAC3-D3G/mlAC3-D3G/mhAC3-D3G/hfreq. MHz31532734035032 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC3-D6G3-element Yagi Antenna for the 300-350 MHz Band with 6 dBd GainThis is a 3-element Yagi antenna with 6 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidthand accurate matching. The entire balun unit and feeder cable inlet are completely sealed in a polyethylene (PET)moulding ensuring permanent waterproof connections. The antenna is terminated with N (female) connector.Radiating elements, supporting booms and adjoining metal castings are constructed in high-quality-aluminumalloys to prevent corrosion. All metal parts are DC-grounded. A mast clamp is provided for mounting on 27-50 mmdiameter mast tube.BASE STATION ANTENNASspecificationsTypeYAGIELECTRICALFrequency Range 300-350 MHzBand width15 MHzSWR < 1.5Gain6 dBd (8.15 dBi)Impedance50 ΩMax Power150 WPolarizationVertical; HorizontalFront to back ratio 16 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.85 m3.3 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC3-D6G/l300-315 MHzAC3-D6G/ml312-327 MHzAC3-D6G/mh325-340 MHzAC3-D6G/h337-350 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+6 +3 0 -3 -6 -6 -3 0 +3 +6 +6 +3 0 -3 -6 -6 -3 0 +3 +60°-30° -60° -90° -60° -30°240° 210° 180° 150° 120°270°90°SWR1.51.0300312325337AC3-D6G/lAC3-D6G/mlAC3-D6G/mhAC3-D6G/hfreq. MHz315327340350For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 33

BASE STATION ANTENNASAC3-D8G5-element Yagi Antenna for the 300-350 MHz Band with 8 dBd GainThis is a 5-element Yagi antenna with 8 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidthand accurate matching. The entire balun unit and feeder cable inlet are completely sealed in a polyethylene (PET)moulding ensuring permanent waterproof connections. The antenna is terminated with N (female) connector.Radiating elements, supporting booms and adjoining metal castings are constructed in high-quality-aluminumalloys to prevent corrosion. All metal parts are DC-grounded. A mast clamp is provided for mounting on 27-50 mmdiameter mast tube.specificationsTypeYAGIELECTRICALFrequency Range 300-350 MHzBand width19 MHzSWR < 1.5Gain8 dBd (10.15 dBi)Impedance50 ΩMax Power150 WPolarizationVertical; HorizontalFront to back ratio 18 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.3 m3.8 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC3-D8G/l300-319 MHzAC3-D8G/m316-335 MHzAC3-D8G/h331-350 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+8 +6 +3 -0 -3 -3 0 +3 +6 +8 +8 +6 +3 0 -3 -3 0 +3 +6 +80°270°90°SWR1.51.0300316331AC3-D8G/lAC3-D8G/mAC3-D8G/h319335350-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz34 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

BA3-1GCoaxial Base Station Antenna with Heavy-Duty-Fiberglass Radome for the 300-350 MHz BandBA3-1G is a 0 dBd gain, omnidirectional rod-type base station antenna for the 300-350 MHz Band. BA3-1G isdesigned for mounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction of themount makes it possible to lead the cable either inside or along the outside of the mast tube. The fiberglass tubecompletely encloses the carefully designed radiating element to ensure long dependable service in all climates.The athmospherical discharges are immediately led to ground as all metal parts are DC-connected. Therefore, theantenna shows a DC-short across the coaxial cable. This antenna is used where reliability is of great importance.A long lifetime has been taken into consideration when designing this antenna – sturdy and strong.BASE STATION ANTENNASspecificationsTypeCOAXIALELECTRICALFrequency Range 300-350 MHzBand width30 MHzSWR < 1.5Gain0 dBd (2.15 dBi)Impedance50 ΩMax Power150 WPolarizationverticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.85 m2.5 kg27-50 mm mast tubeRadome: fiberglassMounting bracket: epoxycoatedaluminum150 km/hORDERING DESIGNATIONSTypeFrequencyBA3-1G/l300-330 MHzBA3-1G/h320-350 MHzMULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°0 -3 -6 -9 -12 -12 -9 -6 -3 090°SWR1.51.0300320BA3-1G/lBA3-1G/h330350240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 35

BASE STATION ANTENNASASKI 300Base Station Antenna with Aluminum Radome for the 300-350 MHz BandASKI 300 is a 3 dBd gain, rod-type base station antenna for the 300-350 MHz Band. ASKI 300 is designed formounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction of the mount makesit possible to lead the cable either inside or along the outside of the mast tube. The aluminum tube completelyencloses the carefully designed radiating element to ensure long dependable service in all climates. This antennais used where reliability is of great importance. A long lifetime has been taken into consideration when designingthis antenna – sturdy and strong.specificationsTypeASKIELECTRICALFrequency Range 300-350 MHzBand width30 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax Power150 WPolarizationverticalConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.70 m1.8 kg27-50 mm mast tubeRadome: aluminumMounting bracket: epoxycoatedaluminum150 km/hORDERING DESIGNATIONSTypeFrequencyASKI 300/l300-330 MHzASKI 300/h320-350 MHzMULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°0 -3 -6 -9 -12 -12 -9 -6 -3 090°SWR1.51.0300320ASKI 300/lASKI 300/h330350240° 210° 180° 150° 120°freq. MHz36 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

BD3-3G2-dipole Array for the 300-350 MHz BandBD3-3G is a base station antenna compounded of 2 dipoles, which give the antenna 3-dBd gain. The antenna issupplied with two cables for each dipole and a SP3-2 cable splitter, which can terminate with any kind of connector.All metal parts are DC-grounded.BASE STATION ANTENNASspecificationsTypeDIPOLE ARRAYELECTRICALFrequency Range 300-350 MHzBand width18 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax Power300 WPolarizationverticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.95 m4.0 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyBD3-3G/l300-318 MHzBD3-3G/m316-334 MHzBD3-3G/h332-350 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+3 0 -3 -6 -9 -9 -6 -3 0 +3 +3 0 -3 -6 -9 -9 -6 -3 0 +30°270°90°SWR1.51.0300316332BD3-3G/lBD3-3G/mBD3-3G/h318334350-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 37

BASE STATION ANTENNASBD3-6G4-dipole Array for the 300-350 MHz BandBD3-6G is a base station antenna compounded of 4 dipoles, which give the antenna 6-dBd gain. The antennais supplied with four cables for each dipole and a SP3-4 cable splitter, which can terminate with any kind ofconnector. All metal parts are DC-grounded.specificationsTypeDIPOLE ARRAYELECTRICALFrequency Range 300-350 MHzBand width15 MHzSWR < 1.5Gain6 dBd (8.15 dBi)Impedance50 ΩMax Power300 WPolarizationverticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load4.8 m20.0 kg27-50 mm mast tubealuminum150 km/hORDERING DESIGNATIONSTypeFrequencyBD3-6G/l300-315 MHzBD3-6G/ml312-327 MHzBD3-6G/mh325-340 MHzBD3-6G/h335-350 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+6 +3 0 -3 -6 -6 -3 0 +3 +6 +6 +3 0 -3 -6 -6 -3 0 +3 +6-30° -60° -90° -60° -30°0°270°240° 210° 180° 150° 120°90°SWR1.51.0300312325335BD3-6G/lBD3-6G/mlBD3-6G/mhBD3-6G/hfreq. MHz31532734035038 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC703-radial Base Station Antenna for the 400-470 MHz BandAC70 is a ground-plane antenna of the triple-leg type. The antenna can be easily installed where no soldering isrequired. The antenna requires no adjustment. The antenna comprises an aluminum GP-head, one epoxy-coatedsteel radiator with open coil and three aluminum radials.BASE STATION ANTENNASspecificationsTypeCOAXIALELECTRICALFrequency Range 400-470 MHzBand width10 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax Power150 WPolarizationverticalConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.9 m max.0.8 kg27-40 mm mast tubeRadiator: stainless steelRadials and GP head:aluminum150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.TYPICAL SWR CURVE2.0SWR1.51.010 MHz Frequency Bandfreq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 39

BASE STATION ANTENNASAC70-DCenter-Fed-Folded Dipole for the 380-470 MHz BandSingle, 0 dBd folded dipole incorporating a balun optimized for wide bandwidth and accurate matching. The entirebalun unit is completely sealed in a polyamide (PA) screw cap ensuring permanent waterproof connections. Thedipole have been constructed with high-quality aluminum to prevent corrosion. All metal parts are DC-grounded.The antenna is supplied with clamp for mounting on 27-40 mm diameter mast tubes.specificationsTypeDIPOLEELECTRICALFrequency Range 380-470 MHzBand width40 MHzSWR < 1.5Gain0 dBd (2.15 dBi)Impedance50 ΩMax Power150 WPolarizationVertical; HorizontalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALWeightMountingMaterialWind Load2.5 kg27-40 mm mast tubeepoxy-coated aluminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC70-D/l380-420 MHzAC70-D/m405-445 MHzAC70-D/h430-470 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+3 0 -3 -6 -9 -9 -6 -3 0 +3 +3 0 -3 -6 -9 -9 -6 -3 0 +30°270°90°SWR1.51.0380405430AC70-D/lAC70-D/mAC70-D/h420445470-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz40 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC5-3G2-element Yagi Antenna for the 380-470 MHz Band with 3 dBd GainThis is a 2-element Yagi antenna with 3 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidth andaccurate matching. The entire balun unit is completely sealed in a polyamide (PA) screw cap ensuring permanentwaterproof connections. The antenna is terminated with N (female) connector. Radiating elements, supportingbooms and adjoining metal castings are constructed in high-quality-aluminum alloys to prevent corrosion. Allmetal parts are DC-grounded. A mast clamp is provided for mounting on 27-50 mm diameter mast tube.BASE STATION ANTENNASspecificationsTypeYAGIELECTRICALFrequency Range 380-470 MHzBand width40 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax Power150 WPolarizationVertical; HorizontalFront to back ratio 12 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.5 m3.1 kg27-50 mm mast tubeepoxy-coated aluminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC5-3G/l380-420 MHzAC5-3G/m405-445 MHzAC5-3G/h430-470 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+3 0 -3 -6 -9 -9 -6 -3 0 +3 +3 0 -3 -6 -9 -9 -6 -3 0 +30°270°90°SWR1.51.0380405430AC5-3G/lAC5-3G/mAC5-3G/h420445470-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 41

BASE STATION ANTENNASAC5-5G3-element Yagi Antenna for the 380-470 MHz Band with 5 dBd GainThis is a 3-element Yagi antenna with 5 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidth andaccurate matching. The entire balun unit is completely sealed in a polyamide (PA) screw cap ensuring permanentwaterproof connections. The antenna is terminated with N (female) connector. Radiating elements, supportingbooms and adjoining metal castings are constructed in high-quality-aluminum alloys to prevent corrosion. Allmetal parts are DC-grounded. A mast clamp is provided for mounting on 27-50 mm diameter mast tube.specificationsTypeYAGIELECTRICALFrequency Range 380-470 MHzBand width40 MHzSWR < 1.5Gain5 dBd (7.15 dBi)Impedance50 ΩMax Power150 WPolarizationVertical; HorizontalFront to back ratio 16 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.72 m3.3 kg27-50 mm mast tubeepoxy-coated aluminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC5-5G/l380-420 MHzAC5-5G/m405-445 MHzAC5-5G/h430-470 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+6 +3 0 -3 -6 -6 -3 0 +3 +6 +6 +3 0 -3 -6 -6 -3 0 +3 +60°270°90°SWR1.51.0380405430AC5-5G/lAC5-5G/mAC5-5G/h420445470-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz42 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC5-7G5-element Yagi Antenna for the 380-470 MHz Band with 7 dBd GainThis is a 5-element Yagi antenna with 7 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidth andaccurate matching. The entire balun unit is completely sealed in a polyamide (PA) screw cap ensuring permanentwaterproof connections. The antenna is terminated with N (female) connector. Radiating elements, supportingbooms and adjoining metal castings are constructed in high-quality-aluminum alloys to prevent corrosion. Allmetal parts are DC-grounded. A mast clamp is provided for mounting on 27-50 mm diameter mast tube.BASE STATION ANTENNASspecificationsTypeYAGIELECTRICALFrequency Range 380-470 MHzBand width35 MHzSWR < 1.5Gain7 dBd (9.15 dBi)Impedance50 ΩMax Power150 WPolarizationVertical; HorizontalFront to back ratio 16 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.02 m3.4 kg27-50 mm mast tubeepoxy-coated aluminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC5-7G/l380-415 MHzAC5-7G/m410-445 MHzAC5-7G/h435-470 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+7 +5 +3 -0 -3 -3 0 +3 +5 +7 +7 +5 +3 0 -3 -3 0 +3 +5 +70°270°90°SWR1.51.0380410435AC5-7G/lAC5-7G/mAC5-7G/h415445470-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 43

BASE STATION ANTENNASAC5-10G7-element Yagi Antenna for the 380-470 MHz Band with 10 dBd GainThis is a 7-element Yagi antenna with 10 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidth andaccurate matching. The entire balun unit is completely sealed in a polyamide (PA) screw cap ensuring permanentwaterproof connections. The antenna is terminated with N (female) connector. Radiating elements, supportingbooms and adjoining metal castings are constructed in high-quality-aluminum alloys to prevent corrosion. Allmetal parts are DC-grounded. A mast clamp is provided for mounting on 27-50 mm diameter mast tube.specificationsTypeYAGIELECTRICALFrequency Range 380-470 MHzBand width35 MHzSWR < 1.5Gain10 dBd (12.15 dBi)Impedance50 ΩMax Power150 WPolarizationVertical; HorizontalFront to back ratio 20 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.3 m3.6 kg27-50 mm mast tubeepoxy-coated aluminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC5-10G/l380-415 MHzAC5-10G/m410-445 MHzAC5-10/h435-470 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+10 +7 +5 +3 0 0 +3 +5 +7 +10 +10 +7 +5 +3 0 0 +3 +5 +7 +100°270°90°SWR1.51.0380410435AC5-10G/lAC5-10G/mAC5-10/h415445470-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz44 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC5-12G9-element Yagi Antenna for the 380-470 MHz Band with 12 dBd GainThis is a 9-element Yagi antenna with 12 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidth andaccurate matching. The entire balun unit is completely sealed in a polyamide (PA) screw cap ensuring permanentwaterproof connections. The antenna is terminated with N (female) connector. Radiating elements, supportingbooms and adjoining metal castings are constructed in high-quality-aluminum alloys to prevent corrosion. Allmetal parts are DC-grounded. A mast clamp is provided for mounting on 27-50 mm diameter mast tube.BASE STATION ANTENNASspecificationsTypeYAGIELECTRICALFrequency Range 380-470 MHzBand width35 MHzSWR < 1.5Gain12 dBd (14.15 dBi)Impedance50 ΩMax Power150 WPolarizationVertical; HorizontalFront to back ratio 22 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.5 m3.7 kg27-50 mm mast tubeepoxy-coated aluminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC5-12G/l380-415 MHzAC5-12G/m410-445 MHzAC5-12/h435-470 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+12 +9 +6 +3 0 0 +3 +6 +9 +12 +12 +9 +6 +3 0 0 +3 +6 +9 +120°270°90°SWR1.51.0380410435AC5-12G/lAC5-12G/mAC5-12/h415445470-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 45

BASE STATION ANTENNASBA70-1GCoaxial Base Station Antenna with Heavy-Duty-Fiberglass Radome for the 380-470 MHz BandBA70-1G is a 0 dBd gain, omnidirectional rod-type base station antenna for the 380-470 MHz Band. BA70-1G isdesigned for mounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction of themount makes it possible to lead the cable either inside or along the outside of the mast tube. The fiberglass tubecompletely encloses the carefully designed radiating element to ensure long dependable service in all climates.This antenna is used where reliability is of great importance. A long lifetime has been taken into considerationwhen designing this antenna – sturdy and strong.specificationsTypeCOAXIALELECTRICALFrequency Range 380-470 MHzBand width40 MHzSWR < 1.2Gain0 dBd (2.15 dBi)Impedance50 ΩMax Power150 WPolarizationverticalAntistatic protection N/AConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.85 m0.8 kg27-40 mm mast tubeRadome: fiberglassMounting bracket: epoxycoatedaluminum150 km/hORDERING DESIGNATIONSTypeFrequencyBA70-1G/l380-420 MHzBA70-1G/m405-445 MHzBA70-1G/h430-470 MHzMULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°0 -3 -6 -9 -12 -12 -9 -6 -3 090°SWR1.51.0380405430BA70-1G/lBA70-1G/mBA70-1G/h420445470240° 210° 180° 150° 120°freq. MHz46 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

BA70-3GOmnidirectional Base Station Antenna with Heavy-Duty-Fiberglass Radomefor the 380-470 MHz BandBA70-3G is a 3 dBd gain, omnidirectional rod-type base station antenna for the 380-470 MHz Band. BA70-3G isdesigned for mounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction of themount makes it possible to lead the cable either inside or along the outside of the mast tube. The fiberglass tubecompletely encloses the carefully designed radiating element to ensure long dependable service in all climates.The athmospherical discharges are immediately led to ground as all metal parts are DC-connected. Therefore, theantenna shows a DC-short across the coaxial cable. This antenna is used where reliability is of great importance.A long lifetime has been taken into consideration when designing this antenna – sturdy and strong.BASE STATION ANTENNASspecificationsTypeOMNIDIRECTIONALELECTRICALFrequency Range 380-470 MHzBand width10 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax Power150 WPolarizationverticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load2.8 m1.6 kg27-40 mm mast tubeRadome: fiberglassMounting bracket: epoxycoatedaluminum150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.MULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°+3 0 -3 -6 -9 -9 -6 -3 0 +390°SWR1.51.010 MHz Frequency Band240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 47

BASE STATION ANTENNASBA70-5GOmnidirectional Base Station Antenna with Heavy-Duty-Fiberglass Radomefor the 380-470 MHz BandBA70-5G is a 5 dBd gain, omnidirectional rod-type base station antenna for the 380-470 MHz Band. BA70-5G isdesigned for mounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction of themount makes it possible to lead the cable either inside or along the outside of the mast tube. The fiberglass tubecompletely encloses the carefully designed radiating element to ensure long dependable service in all climates.The athmospherical discharges are immediately led to ground as all metal parts are DC-connected. Therefore, theantenna shows a DC-short across the coaxial cable. This antenna is used where reliability is of great importance.A long lifetime has been taken into consideration when designing this antenna – sturdy and strong.specificationsTypeOMNIDIRECTIONALELECTRICALFrequency Range 380-470 MHzBand width10 MHzSWR < 1.5Gain5 dBd (7.15 dBi)Impedance50 ΩMax Power150 WPolarizationverticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load3.1 m3.0 kg27-40 mm mast tubeRadome: fiberglassMounting bracket: epoxycoatedaluminum150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.MULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°+5 +3 0 -3 -6 -6 -3 0 +3 +590°SWR1.51.010 MHz Frequency Band240° 210° 180° 150° 120°freq. MHz48 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

BA70-7GOmnidirectional Base Station Antenna with Heavy-Duty-Fiberglass Radomefor the 380-470 MHz BandBA70-7G is a 7 dBd gain, omnidirectional rod-type base station antenna for the 380-470 MHz Band. BA70-7G isdesigned for mounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction of themount makes it possible to lead the cable either inside or along the outside of the mast tube. The fiberglass tubecompletely encloses the carefully designed radiating element to ensure long dependable service in all climates.The athmospherical discharges are immediately led to ground as all metal parts are DC-connected. Therefore, theantenna shows a DC-short across the coaxial cable. This antenna is used where reliability is of great importance.A long lifetime has been taken into consideration when designing this antenna – sturdy and strong.BASE STATION ANTENNASspecificationsTypeOMNIDIRECTIONALELECTRICALFrequency Range 380-470 MHzBand width10 MHzSWR < 1.5Gain7 dBd (9.15 dBi)Impedance50 ΩMax Power150 WPolarizationverticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load4.2 m4.1 kg27-40 mm mast tubeRadome: fiberglassMounting bracket: epoxycoatedaluminum150 km/hORDERING DESIGNATIONSWhen ordering, please, specify an exactfrequency.MULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°+7 +5 +3 0 -3 -3 0 +3 +5 +790°SWR1.51.010 MHz Frequency Band240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 49

BASE STATION ANTENNASASKI 450Base Station Antenna with Aluminum Radome for the 380-470 MHz BandASKI 450 is a 3 dBd gain, rod-type base station antenna for the 380-470 MHz Band. ASKI 450 is designed formounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction of the mount makesit possible to lead the cable either inside or along the outside of the mast tube. The aluminum tube completelyencloses the carefully designed radiating element to ensure long dependable service in all climates. This antennais used where reliability is of great importance. A long lifetime has been taken into consideration when designingthis antenna – sturdy and strong.specificationsTypeASKIELECTRICALFrequency Range 380-470 MHzBand width40 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax Power150 WPolarizationverticalConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.65 m1.7 kg27-50 mm mast tubeRadome: aluminumMounting bracket:epoxy-coated aluminum150 km/hORDERING DESIGNATIONSTypeFrequencyASKI 450/l380-420 MHzASKI 450/m405-445 MHzASKI 450/h430-470 MHzMULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°0 -3 -6 -9 -12 -12 -9 -6 -3 090°SWR1.51.0380405430ASKI 450/lASKI 450/mASKI 450/h420445470240° 210° 180° 150° 120°freq. MHz50 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

BD70-3G2-dipole Array for the 400-470 MHz BandBD70-3G is a base station antenna compounded of 2 dipoles, which give the antenna 3-dBd gain. The antennais supplied with two cables for each dipole and a SP70-2 cable splitter, which can terminate with any kind ofconnector. All metal parts are DC-grounded.BASE STATION ANTENNASspecificationsTypeDIPOLE ARRAYELECTRICALFrequency Range 400-470 MHzBand width18 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax Power300 WPolarizationverticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.5 m5.2 kg27-50 mm mast tubePVC-coated aluminum150 km/hORDERING DESIGNATIONSTypeFrequencyBD70-3G/l400-418 MHzBD70-3G/ml417-435 MHzBD70-3G/mh434-452 MHzBD70-3G/h452-470 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+3 0 -3 -6 -9 -9 -6 -3 0 +3 +3 0 -3 -6 -9 -9 -6 -3 0 +30°-30° -60° -90° -60° -30°240° 210° 180° 150° 120°270°90°SWR1.51.0400417434452BD70-3G/lBD70-3G/mlBD70-3G/mhBD70-3G/hfreq. MHz418435452470For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 51

BASE STATION ANTENNASBD70-6G4-dipole Array for the 400-470 MHz BandBD70-6G is a base station antenna compounded of 4 dipoles, which give the antenna 6-dBd gain. The antennais supplied with four cables for each dipole and a SP70-4 cable splitter, which can terminate with any kind ofconnector. All metal parts are DC-grounded.specificationsTypeDIPOLE ARRAYELECTRICALFrequency Range 400-470 MHzBand width18 MHzSWR < 1.5Gain6 dBd (8.15 dBi)Impedance50 ΩMax Power300 WPolarizationverticalAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load3.0 m10.0 kg27-50 mm mast tubePVC-coated aluminum150 km/hORDERING DESIGNATIONSTypeFrequencyBD70-6G/l400-418 MHzBD70-6G/ml417-435 MHzBD70-6G/mh434-452 MHzBD70-6G/h452-470 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+6 +3 0 -3 -6 -6 -3 0 +3 +6 +6 +3 0 -3 -6 -6 -3 0 +3 +60°-30° -60° -90° -60° -30°240° 210° 180° 150° 120°270°90°SWR1.51.0400417434452BD70-6G/lBD70-6G/mlBD70-6G/mhBD70-6G/hfreq. MHz41843545247052 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC6-10G7-element Yagi Antenna for the 820-960 MHz Band with 10 dBd GainThis is a 7-element Yagi antenna with 10 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidthand accurate matching. The antenna is terminated with N (female) connector. Radiating elements, supportingbooms and adjoining metal castings are constructed in high-quality-aluminum alloys to prevent corrosion. Allmetal parts are DC-grounded. A mast clamp is provided for mounting on 27-50 mm diameter mast tube.BASE STATION ANTENNASspecificationsTypeYAGIELECTRICALFrequency Range 820-960 MHzBand width70 MHzSWR < 1.5Gain10 dBd (12.15 dBi)Impedance50 ΩMax Power150 WPolarizationVertical; HorizontalFront to back ratio 20 dBAntistatic protection N/AConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.75 m1.5 kg27-40 mm mast tubePVC-coated aluminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC6-10G/l820-890 MHzAC6-10G/h890-960 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+10 +7 +3 0 -3 -3 0 +3 +7 +10 +10 +7 +3 0 -3 -3 0 +3 +7 +100°270°90°SWR1.51.0820890AC6-10G/lAC6-10G/h890960-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 53

BASE STATION ANTENNASAC6-12G10-element Yagi Antenna for the 820-960 MHz Band with 12 dBd GainThis is a 10-element Yagi antenna with 12 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidthand accurate matching. The antenna is terminated with N (female) connector. Radiating elements, supportingbooms and adjoining metal castings are constructed in high-quality-aluminum alloys to prevent corrosion. Allmetal parts are DC-grounded. A mast clamp is provided for mounting on 27-50 mm diameter mast tube.specificationsTypeYAGIELECTRICALFrequency Range 820-960 MHzBand width70 MHzSWR < 1.5Gain12 dBd (14.15 dBi)Impedance50 ΩMax Power150 WPolarizationVertical; HorizontalFront to back ratio 22 dBAntistatic protection N/AConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.13 m1.6 kg27-40 mm mast tubePVC-coated aluminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC6-12G/l820-890 MHzAC6-12G/h890-960 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+12 +9 +6 +3 0 0 +3 +6 +9 +12 +12 +9 +6 +3 0 0 +3 +6 +9 +120°270°90°SWR1.51.0-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz54 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

BA90-1GCoaxial Base Station Antenna with Heavy-Duty-Fiberglass Radome for the 820-960 MHz BandBA90-1G is a 0 dBd gain, omnidirectional rod-type base station antenna for the 820-960 MHz Band. BA90-1G isdesigned for mounting on supporting tubes with outer diameter between 27 mm and 40 mm The construction of themount makes it possible to lead the cable either inside or along the outside of the mast tube. The fiberglass tubecompletely encloses the carefully designed radiating element to ensure long dependable service in all climates.This antenna is used where reliability is of great importance. A long lifetime has been taken into considerationwhen designing this antenna – sturdy and strong.BASE STATION ANTENNASspecificationsTypeCOAXIALELECTRICALFrequency Range 820-960 MHzBand width50 MHzSWR < 1.5Gain0 dBd (2.15 dBi)Impedance50 ΩMax Power150 WPolarizationverticalAntistatic protection N/AConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.7 m1.0 kg27-40 mm mast tubeRadome: fiberglassMounting bracket: epoxycoatedaluminum150 km/hORDERING DESIGNATIONSTypeFrequencyBA90-1G/l820-870 MHzBA90-1G/m860-910 MHzBA90-1G/h910-960 MHzMULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°0 -3 -6 -9 -12 -12 -9 -6 -3 090°SWR1.51.0820860910BA90-1G/lBA90-1G/mBA90-1G/h870910960240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 55

BASE STATION ANTENNASBA90-3GOmnidirectional Base Station Antenna with Heavy-Duty-Fiberglass Radomefor the 820-960 MHz BandBA90-3G is a 3 dBd gain, omnidirectional rod-type base station antenna for the 820-960 MHz Band. BA90-3G isdesigned for mounting on supporting tubes with outer diameter between 27 mm and 40 mm The construction of themount makes it possible to lead the cable either inside or along the outside of the mast tube. The fiberglass tubecompletely encloses the carefully designed radiating element to ensure long dependable service in all climates.This antenna is used where reliability is of great importance. A long lifetime has been taken into considerationwhen designing this antenna – sturdy and strong.specificationsTypeOMNIDIRECTIONALELECTRICALFrequency Range 820-960 MHzBand width50 MHzSWR < 1.5Gain3 dBd (5.15 dBi)Impedance50 ΩMax Power100 WPolarizationverticalAntistatic protection N/AConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.7 m1.4 kg27-40 mm mast tubeRadome: fiberglassMounting bracket: epoxycoatedaluminum150 km/hORDERING DESIGNATIONSTypeFrequencyBA90-3G/l820-870 MHzBA90-3G/m860-910 MHzBA90-3G/h910-960 MHzMULTI-PURPOSE MOUNTING BRACKETRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°+3 0 -3 -6 -9 -9 -6 -3 0 +390°SWR1.51.0820860910BA90-3G/lBA90-3G/mBA90-3G/h870910960240° 210° 180° 150° 120°freq. MHz56 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC1.2-7G4-element Yagi Antenna for the 1100-1300 MHz Band with 7 dBd GainThis is a 4-element Yagi antenna with 7 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidth andaccurate matching. The antenna is terminated with N (female) connector. Radiating elements, supporting boomsand adjoining metal castings are constructed in high-quality-aluminum alloys to prevent corrosion. A mast clampis provided for mounting on 27-50 mm diameter mast tube.BASE STATION ANTENNASspecificationsTypeYAGIELECTRICALFrequency Range 1100-1300 MHzBand width30 MHzSWR < 1.5Gain7 dBd (9.15 dBi)Impedance50 ΩMax Power150 WPolarizationVertical; HorizontalFront to back ratio 20 dBAntistatic protection N/AConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.385 m1.0 kg27-40 mm mast tubePVC-coated aluminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC1.2-7G1100-1300 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+7 +5 +3 -0 -3 -3 0 +3 +5 +7 +7 +5 +3 0 -3 -3 0 +3 +5 +70°270°90°SWR1.51.01100 AC1.2-7G 1300-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 57

BASE STATION ANTENNASAC1.2-11G9-element Yagi Antenna for the 1100-1300 MHz Band with 11 dBd GainThis is a 9-element Yagi antenna with 11 dBd Gain. This Yagi incorporates baluns optimized for wide bandwidthand accurate matching. The antenna is terminated with N (female) connector. Radiating elements, supportingbooms and adjoining metal castings are constructed in high-quality-aluminum alloys to prevent corrosion. A mastclamp is provided for mounting on 27-50 mm diameter mast tube.specificationsTypeYAGIELECTRICALFrequency Range 1100-1300 MHzBand width100 MHzSWR < 1.5Gain11 dBd (13.15 dBi)Impedance50 ΩMax Power150 WPolarizationVertical; HorizontalFront to back ratio 20 dBAntistatic protection N/AConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.8 m1.1 kg27-40 mm mast tubePVC-coated aluminum150 km/hORDERING DESIGNATIONSTypeFrequencyAC1.2-11G1100-1300 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+11 +9 +6 +3 0 0 +3 +6 +9 +11 +11 +9 +6 +3 0 0 +3 +6 +9 +110°270°90°SWR1.51.01100 AC1.2-11G 1300-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz58 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

BA1.2-6GOmnidirectional Base Station Antenna with Heavy-Duty-Fiberglass Radomefor the 1.2 GHz BandBA1.2-6G is a 6 dBi gain, omnidirectional rod-type base station antenna for the 1.2 GHz Band. BA1.2-6G isdesigned for mounting on supporting tubes with outer diameter between 25 mm and 48 mm. The fiberglasstube completely encloses the carefully designed radiating element to ensure excellent performance in all climateconditions. This antenna is used where reliability is of great importance. A long lifetime has been taken intoconsideration when designing this antenna – sturdy and strong.BASE STATION ANTENNASspecificationsTypeOMNIDIRECTIONALELECTRICALFrequency Range 1100-1300 MHzBand width25 MHzSWR < 1.5Gain6 dBd (8.15 dBi)Impedance50 ΩMax Power100 WPolarizationverticalAntistatic protection N/AConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.0 m0.7 kg25-48 mm mast tubeRadome: fiberglassMounting bracket:stainless steel150 km/hORDERING DESIGNATIONSTypeFrequencyBA1.2-6G1100-1300 MHzRADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°+6 +5 +3 0 -3 -3 0 +3 +5 +690°SWR1.51.025 MHz Frequency Band240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 59

BASE STATION ANTENNASACP1.2-24GParabolic Grid Directional Antenna for the 1.2 GHz BandACP1.2-24G is a 24 dBi gain, wire grid parabolic base station antenna for the 1.2 GHz Band. Due to its grid parabolicreflector the ACP1.2-24G attains wide band width and strong gain. Constructed of welded steel wires which aregalvanized and then powder coat painted, they offer extremely long service life in the most extreme environmentalconditions. The wire grid semi-parabolic design offers unsurpassed low wind loading while maintaining good RFperformance. The antenna is designed for mounting on supporting tubes with outer diameter between 30 mm and50 mm. It can be mounted for both vertical and horizontal polarization. The antenna terminates with an N femaleconnector.specificationsTypeWire Grid ParabolicELECTRICALFrequency Range 1100-1300 MHzBand width60 MHzSWR < 1.5Gain24 dBiImpedance50 ΩMax Power100 WPolarizationVertical; HorizontalFront to back ratio 31 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALDimensionsWeightMountingMaterialWind Load900 x 600 mm5.4 kg30-50 mm mast tubePowder-coated steel150 km/hORDERING DESIGNATIONSTypeFrequencyACP1.2-24G1100-1300 MHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+24 +18 +12 +6 0 0 +6 +12 +18 +24 +24 +18 +12 +6 0 0 +6 +12 +18 +240°270°90°SWR1.51.060 MHz Frequency Band-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz60 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

BA2.4-6GOmnidirectional Base Station Antenna with Heavy-Duty-Fiberglass Radomefor the 2.4 GHz BandBA2.4-6G is a 6 dBi gain, omnidirectional rod-type base station antenna for the 2.4 GHz Band. BA2.4-6G isdesigned for mounting on supporting tubes with outer diameter between 25 mm and 48 mm. The fiberglasstube completely encloses the carefully designed radiating element to ensure excellent performance in all climateconditions. This antenna is used where reliability is of great importance. A long lifetime has been taken intoconsideration when designing this antenna – sturdy and strong.BASE STATION ANTENNASspecificationsTypeOMNIDIRECTIONALELECTRICALFrequency Range 2400-2483 MHzBand width83 MHzSWR < 1.5Gain4.85 dBd (6 dBi)Impedance50 ΩMax Power100 WPolarizationverticalAntistatic protection N/AConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.73 m0.5 kg25-48 mm mast tubeRadome: fiberglassMounting bracket:stainless steel150 km/hORDERING DESIGNATIONSTypeFrequencyBA2.4-6G2.4 GHzRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°+6 +5 +3 0 -3 -3 0 +3 +5 +690°SWR1.51.083 MHz Frequency Band240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 61

BASE STATION ANTENNASBA2.4-12GOmnidirectional Base Station Antenna with Heavy-Duty-Fiberglass Radomefor the 2.4 GHz BandBA2.4-12G is a 12 dBi gain, omnidirectional rod-type base station antenna for the 2.4 GHz Band. BA2.4-12Gis designed for mounting on supporting tubes with outer diameter between 25 mm and 48 mm. The fiberglasstube completely encloses the carefully designed radiating element to ensure excellent performance in all climateconditions. This antenna is used where reliability is of great importance. A long lifetime has been taken intoconsideration when designing this antenna – sturdy and strong.specificationsTypeOMNIDIRECTIONALELECTRICALFrequency Range 2400-2483 MHzBand width83 MHzSWR < 1.5Gain10.85 dBd (12 dBi)Impedance50 ΩMax Power100 WPolarizationverticalAntistatic protection N/AConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load1.1 m0.7 kg25-48 mm mast tubeRadome: fiberglassMounting bracket:stainless steel150 km/hORDERING DESIGNATIONSTypeFrequencyBA2.4-12G2.4 GHzRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°+10 +5 +3 0 -3 -3 0 +3 +5 +1090°SWR1.51.083 MHz Frequency Band240° 210° 180° 150° 120°freq. MHz62 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

AC2.4-11GDual-Band Yagi Antenna for the 820-960 MHz and the 1700-2500 MHz Band with 11 dBi GainThis is a Dual-Band Yagi antenna with 11 dBi Gain. This Yagi is applicable for GSM/CDMA/3G/WLAN and othersystems in the frequency range between 800 MHz and 2500 MHz.This low-profile antenna has a compact size with a fiberglass radome which terminates with an N female pigtail.A mast clamp is provided for mounting on 20-50 mm diameter mast tube.BASE STATION ANTENNASspecificationsTypeELECTRICALFrequency RangeDUAL-BAND YAGII - 824-960 MHzII - 1710 - 2500 MHzBand width - ˚ I - E-60 ˚; H-80 ˚II - E-50 ˚; H-60 ˚SWR < 1.5GainI - 9.5 dBiII - 11 dBiImpedance50 ΩMax Power150 WPolarizationVertical; HorizontalFront to back ratio I - 25 dBII - 20 dBAntistatic protection N/AConnectorN (female)MECHANICALDimensionsWeightMountingMaterialWind Load330 x 215 x 65 mm1.3 kg20-50 mm mast tubeRadome: fiberglassMounting bracket:stainless steel150 km/hRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+10 +5 +3 0 -3 -3 0 +3 +5 +10 +10 +5 +3 0 -3 -3 0 +3 +5 +100°270°90°SWR1.51.0I - Frequency BandII - Frequency Band-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 63

BASE STATION ANTENNASACP2.4-24GParabolic Grid Directional Antenna for the 2.4 GHz BandACP2.4-24G is a 24 dBi gain, wire grid parabolic base station antenna for the 2.4 GHz Band. Due to its grid parabolicreflector the ACP2.4-24G attains wide band width and strong gain. Constructed of welded steel wires which aregalvanized and then powder coat painted, they offer extremely long service life in the most extreme environmentalconditions. The wire grid semi-parabolic design offers unsurpassed low wind loading while maintaining good RFperformance. The antenna is designed for mounting on supporting tubes with outer diameter between 30 mm and50 mm. It can be mounted for both vertical and horizontal polarization. The antenna terminates with an N femaleconnector.specificationsTypeWire Grid ParabolicELECTRICALFrequency Range 2400-2483 MHzBand width83 MHzSWR < 1.5Gain24 dBiImpedance50 ΩMax Power100 WPolarizationVertical; HorizontalFront to back ratio 31 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALDimensionsWeightMountingMaterialWind Load900 x 600 mm2.50 kg30-50 mm mast tubePowder coated steel150 km/hORDERING DESIGNATIONSTypeFrequencyACP2.4-24G2.4 GHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+24 +18 +12 +6 0 0 +6 +12 +18 +24 +24 +18 +12 +6 0 0 +6 +12 +18 +240°270°90°SWR1.51.083 MHz Frequency Band-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz64 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

BA5.8-12GOmnidirectional Base Station Antenna with Heavy-Duty-Fiberglass Radomefor the 5.8 GHz BandBA5.8-12G is a 12 dBi gain, omnidirectional rod-type base station antenna for the 5.8 GHz Band. BA5.8-12Gis designed for mounting on supporting tubes with outer diameter between 25 mm and 48 mm. The fiberglasstube completely encloses the carefully designed radiating element to ensure excellent performance in all climateconditions. This antenna is used where reliability is of great importance. A long lifetime has been taken intoconsideration when designing this antenna – sturdy and strong.BASE STATION ANTENNASspecificationsTypeOMNIDIRECTIONALELECTRICALFrequency Range 5725-5850 MHzBand width125 MHzSWR < 1.5Gain10.85 dBd (12 dBi)Impedance50 ΩMax Power100 WPolarizationverticalAntistatic protection N/AConnectorN (female)MECHANICALLengthWeightMountingMaterialWind Load0.54 m0.5 kg25-48 mm mast tubeRadome: fiberglassMounting bracket:stainless steel150 km/hORDERING DESIGNATIONSTypeFrequencyBA5.8-12G5.8 GHzRADIATION PATTERN (E-PLANE)TYPICAL SWR CURVE300°330°0°30°60°2.0270°+10 +5 +3 0 -3 -3 0 +3 +5 +1090°SWR1.51.0125 MHz Frequency Band240° 210° 180° 150° 120°freq. MHzFor drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.Product catalog | Inmak 2000 65

BASE STATION ANTENNASACP5.8-24GParabolic Grid Directional Antenna for the 5.8 GHz BandACP5.8-24G is a 27 dBi gain, wire grid parabolic base station antenna for the 5.8 GHz Band. Due to its grid parabolicreflector the ACP5.8-24G attains wide band width and strong gain. Constructed of welded steel wires which aregalvanized and then powder coat painted, they offer extremely long service life in the most extreme environmentalconditions. The wire grid semi-parabolic design offers unsurpassed low wind loading while maintaining good RFperformance. The antenna is designed for mounting on supporting tubes with outer diameter between 30 mm and50 mm. It can be mounted for both vertical and horizontal polarization. The antenna terminates with an N femaleconnector.specificationsTypeWire Grid ParabolicELECTRICALFrequency Range 5725-5850 MHzBand width125 MHzSWR < 1.5Gain27 dBiImpedance50 ΩMax Power100 WPolarizationVertical; HorizontalFront to back ratio 25 dBAntistatic protection DC-grounded (Connectorshows a DC-short)ConnectorN (female)MECHANICALDimensionsWeightMountingMaterialWind Load600 x 400 mm2.40 kg30-50 mm mast tubePowder-coated steel150 km/hORDERING DESIGNATIONSTypeFrequencyACP5.8-24G5.8 GHzRADIATION PATTERN (E-PLANE)RADIATION PATTERN (H-PLANE)TYPICAL SWR CURVE+30°+60°+90°+60°+30°300°330°0°30°60°2.00°+24 +18 +12 +6 0 0 +6 +12 +18 +24 +24 +18 +12 +6 0 0 +6 +12 +18 +240°270°90°SWR1.51.0125 MHz Frequency Band-30° -60° -90° -60° -30°240° 210° 180° 150° 120°freq. MHz66 Product catalog | Inmak 2000For drawings, technical data or samples, contact our engeneers. Specifications subjectto change. Consult Inmak 2000 Ltd. for latest specifications.

NOTES