Design Guide Part 3 - North York Moors National Park
Design Guide Part 3 - North York Moors National Park
Design Guide Part 3 - North York Moors National Park
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SECTION 2LANDSCAPERight: Tarmac can appearsuburban and generatehigher levels of run-offFar right: Large areasof block paving canappear too regular andunyielding as well ascreating higher levelsof run-offPathwaysOne of the most attractive features of many of the <strong>National</strong> <strong>Park</strong>’s establishedrural settlements is the simplicity of the external surfaces. This simplicity appliesparticularly to the natural stone-flagged footpaths and paved areas whichcharacterise many villages across the <strong>Park</strong>.When choosing hard surfacing materials consideration should be given to matterssuch as the colour, the permeability, the brightness and reflectivity of the surfacesand how they appear (particularly from a distance).Right: Stone flagpathway adds to thevisual character of thestreetscapeFar right: <strong>York</strong> Stoneslabs are commonlyused as a hard surfacewithin the <strong>National</strong> <strong>Park</strong>A range of pathwaydesigns using <strong>York</strong> StoneA B C DA A single line of regular shaped stones based on the traditional ‘Trod’ Paths.B A simple pathway with straight edges.C An asymmetrical path with a straight edge adjacent the roadside.D Simple single stepping-stones set in grass, for low density use.43