10 APOLLO - DRYER BOOSTER FANS.cdr - Reversomatic

DRYER BOOSTER “RI” SERIES FANS9.5”dia.A O.D.PERFORMANCE CHARTMODELRI-150RI-200RI-250CUBIC FEET PER MINUTE AT STATIC PRESSURE0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00156 148 140 132 125 112 101 94 88 -2142528”198227A O.D.RI150 - 3 7/8 ”RI200 - 4 7/8 ”RI250 - 5 7/8 ”A O.D.186208• Engineered to provide effective andreliable operation.• Fan housing constructed of heavygauge satin coat steel with bakedenamel finish.• Meet Washington State Ventilationand Indoor Air Quality Code.FAN MOTORRPM (Revolution Per Minute) shown is nominal and performance is based on actual speed of test.Unit was tested with inlet cone, backdraft damper and outlet duct.173194MODELAMPSWattsRPM159180RI-150 RI-200 RI-250DRYER BOOSTER “PWS” SERIES FANS0.70852500146165133150ACCESSORIESStandard:- Mounting brackets for wall or trussmounting (fig.1)Optional:- Mounting clamps for use with rigidduct, complete with foam rubberinsulation (fig.2)- Suspension bracket (fig.3)- Backdraft damper with butterflyvalve to prevent cold air fromentering when fan is not in use (fig.4)121133fig.1 fig.2 fig.3 fig.410912097108--93CAThe PWS series is specially designed to exhaust air from the dryer. It hasbeen equipped with a paddle wheel impeller to prevent lint buildup.MinimumClearanceH17/8”Ddia.FEBPERFORMANCE CHARTMODELOutletTransitionModelPWS100/200PWS300DIMENSIONS:MODELPWS100PWS200PWS300RPMAa”Aa”3 3/44 1/2dia.PWS100 - 5”PWS200 - 6”PWS300 - 7”A91/4”91/4”11”B11”11”123/4”Bb”Bb”3 1/44 1/25"C4 ½”4 ½”5 ½”AMPSACCESSORIESStandard:• Mounting bracketsOptional:• Lint trap• Outlet TransitionD5”6”7”S.P.E33/4”33/4”41/2”F31/4”31/4”41/4”0.00H81/2”91/2”11”0.10PWS100, 200 & 300 FAN DATAS.P. (Static Pressure - Inch W.G.)0.200.600.500.400.300.200.100.000.30PWS100100 200 300Air Flow (CFM - Cubic Feet Per Minute)0.40PWS2000.50PWS3000.60SIDE VIEWPWS100PWS200PWS3001550155015501.22.33.3CFM18920530017418528415817126714015525012013523198108206749317718