FlawTech - Radiatronics NDT Inc.

ASME SECTION XIAPPENDIX VIII KITSFlaw Manufacturing Technology4486 RACEWAY DR.CONCORD, NORTH CAROLINA USA 28027TEL: 704-795-4401 FAX: 704-795-4403 WWW.FLAWTECH.COMASME BOILER & PRESSURE VESSEL CODE, SECTION XI,APPENDIX VIII, SUPPLEMENTS 2, 3&10KITSSUPPLEMENT 2KIT FORAUSTENITICPIPINGPIPE SPECIMENDIMENSIONS2” SCH80 X 24” 360°4” SCH80 X 24” 360°6” SCH160 X 24” 360°12”SCH80s X 24” 360°24”SCH80s X 24” 120°KIT TOTAL - 5 SPECIMENSUNFLAWEDUNITS1349522FLAWEDUNITS1123310REV. 3-06CRITICALTOLERANCE+/- 0.040” (1MM)SUPPLEMENT 3KIT FORFERRITICPIPING2” SCH80 X 24” 360°4” SCH80 X 24” 360°6” SCH160 X 24” 360°12”SCH80s X 24” 360°24”SCH80s X 24” 120°KIT TOTAL - 5 SPECIMENS13495221123310FLAWTECHORIGINALKITSUPPLEMENT 10KIT FORDISSIMILARMETAL WELDS4” SCH80 X 24” 360°6” SCH160 X 24” 360°8” SCH80 X 24” 360°12”SCH80s X 24” 180°24”SCH80s X 24” 90°KIT TOTAL - 5 SPECIMENS34644212234415SEE PRICE LISTFOR PRICEINFORMATIONKIT AND FLAW DETAILS:EACH KIT WILL CONTAIN A MIX OF CROWN GEOMETRIES, SUCH AS, GROUND,AS WELDED CROWNS AND WIDE CROWNS.EACH KIT WILL CONTAIN NON-CRACK GEOMETRIC CONDITIONS.ALL FLAWS WILL BE MECHANICAL FATIGUE OR THERMAL FATIGUE CRACKS.AT LEAST 75% OF THE CRACKS WILL BE THERMAL FATIGUE.10% OF THE FLAWS WILL BE ORIENTED AXIALLY & 30% FOR SUP.10.50% OF THE CRACKS WILL BE COINCIDENT WITH FABRICATED CONDITIONS.60% OF THE FLAW DEPTHS WILL BE MANUFACTURED AT 5-30%, 31-60 % AND61-100% OF WALL THICKNESS. REMAINING 40% WILL HAVE RANDOM DEPTHS.THE ABOVE KITS ARE MANUFACTURED TO MEET THE MINIMUM REQUIREMENTSOF ASME, BOILER & PRESSURE VESSEL CODE, SECTION XI, APPENDIX VIII,OF SUPPLEMENTS 2, 3&10.