H 9951 - Axson North America, Inc

H 9951NON-FILLED STRUCTURAL EPOXY ADHESIVEFOR BONDING PANELSPROPERTIESADEKIT H 9951 is a two-component non-filled epoxy adhesive whose properties make it the idealproduct for bonding high dimension surfaces having high levels of mechanical and ageingresistance.APPLICATIONSBonding of panels : honeycomb, aluminium sheet, steel sheet, composite materials, wood,thermoplastics, foam, etc...PHYSICAL PROPERTIESMix ratio by weight 100 62Mix ratio by volume 100 73RESIN HARDENER MIXINGAspect light amber translucent red light yellowSpecific gravity at 25°C 1.16 0.98 1.08Brookfield viscosity at 25°C (mPa.s) 12,000 10,000 11,000Pot life (50 g) at 25°C50 min.MECHANICAL PROPERTIES ON ASSEMBLIESLap shear strength on aluminium ISO 4587-95 MPa 25 AFFloating roller peel resistance (2) ISO 4578-90 kN/m 4 AFLap shear strength on aluminium2017A etched in sulfochromic bath(1) Hardening conditions: 8 hrs at 80°C + 48 hrs at room temperature(2) AF :Adhesive failureEQUIPMENTPlease consult our technical department for applications needing a machine.PRECAUTIONSIt is recommended to use the product at a temperature between +18°C and +35°C.Normal health and safety precautions should be observed when handling these products :• ensure good ventilation• wear gloves and safety glasses• wear waterproof clothesFor further information, please consult the product safety data sheet.Page 1/3 02259AXSON France AXSON GmbH AXSON IBERICA AXSON BRASIL AXSON ASIA LtdBP 444 Dietzenbach Barcelona Sao Paulo Seoul95005 Cergy Cedex Tél. (+49) 6074 40711-0 Tel. (+34) 93 225 16 20 Tel. (+55) 11 4109 6445 Tel. (+82) 2 599 4785FRANCETél. (+33) 1 34 40 34 60 AXSON Italie AXSON UK Limited AXSON MEXICO AXSON NORTH AMERICAFax (+33) 1 34 21 97 87 Saronno Suffolk Mexico DF Eaton RapidsEmail : axson@axson.fr Tel. (+39) 02 96 70 23 36 Tel. (+44) 16 38 66 00 62 Tel. (+52) 5 264 4922 Tel. (+1) 517 663 81 91

H 9951NON-FILLED STRUCTURAL EPOXY ADHESIVEFOR BONDING PANELSMECHANICAL PROPERTIES ON ASSEMBLESLap shear strength after moist cataplasm 15 days at 80°C ISO 4587-95 MPa 20 AF (2)THERMAL AND MECHANICAL PROPERTIESHardness ISO 868-85 Shore D1 / D15 75/73Tensile strength ISO 527-96 MPa 30Elongation at break ISO 527-96 % 10Glass transition temperature TMA-METTLER °C 60Thermal coefficient of expansion (CTE)[-30;+60]°CTMA-METTLER 10 -6 K -1 70Working temperature - °C -40;+120SUBSTRATE PREPARATIONThe item to be bonded must be free of all dirt, oil or other foreign matter. A clean, dry surface is a must.Consult our Technical Support and refer to the technical data sheet about surface preparations tochoose adapted degreaser or cleaner.PACKAGINGH 99516 x 0,5 kg 6 x 0,31 kg25 kg 15,5 kg5 kg 3,1 kgSTORAGE CONDITIONSUse within 18 months of the manufacturing date. Expiry date indicated on the packaging.GUARANTEEThe information contained in this technical data sheet result from research and tests conducted in our Laboratories under precise conditions. Itis the responsibility of the user to determine the suitability of AXSON products, under their own conditions before commencing with theproposed application. AXSON guarantee the conformity of their products with their specifications but cannot guarantee the compatibility of aproduct with any particular application. AXSON disclaim all responsibility for damage from any incident which results from the use of theseproducts. The responsibility of AXSON is strictly limited to reimbursement or replacement of products which do not comply with the publishedspecifications.Page 2/3 02259AXSON France AXSON GmbH AXSON IBERICA AXSON BRASIL AXSON ASIA LtdBP 444 Dietzenbach Barcelona Sao Paulo Seoul95005 Cergy Cedex Tél. (+49) 6074 40711-0 Tel. (+34) 93 225 16 20 Tel. (+55) 11 4109 6445 Tel. (+82) 2 599 4785FRANCETél. (+33) 1 34 40 34 60 AXSON Italie AXSON UK Limited AXSON MEXICO AXSON NORTH AMERICAFax (+33) 1 34 21 97 87 Saronno Suffolk Mexico DF Eaton RapidsEmail : axson@axson.fr Tel. (+39) 02 96 70 23 36 Tel. (+44) 16 38 66 00 62 Tel. (+52) 5 264 4922 Tel. (+1) 517 663 81 91

H 9951NON-FILLED STRUCTURAL EPOXY ADHESIVEFOR BONDING PANELSANNEXLap shear strength vs temperature (1)4540353025MPa20151050-40°C -20°C °C 20°C 40°C 60°C 80°C 100°C 120°C(1) Hardening conditions : 8 hrs at 80°C + 48 hours at room temperatureTHERMAL SHOCK TEST ACCORDING TO ISO 9142-93 NORMD3 cycleCycle of exposure to heat, cold and moisturetemperature°C/moisture %1009080706050403020100-10-20-30Moisture %Temperature0 4 8 12 16 20 24Exposure in hoursPage 3/3 02259AXSON France AXSON GmbH AXSON IBERICA AXSON BRASIL AXSON ASIA LtdBP 444 Dietzenbach Barcelona Sao Paulo Seoul95005 Cergy Cedex Tél. (+49) 6074 40711-0 Tel. (+34) 93 225 16 20 Tel. (+55) 11 4109 6445 Tel. (+82) 2 599 4785FRANCETél. (+33) 1 34 40 34 60 AXSON Italie AXSON UK Limited AXSON MEXICO AXSON NORTH AMERICAFax (+33) 1 34 21 97 87 Saronno Suffolk Mexico DF Eaton RapidsEmail : axson@axson.fr Tel. (+39) 02 96 70 23 36 Tel. (+44) 16 38 66 00 62 Tel. (+52) 5 264 4922 Tel. (+1) 517 663 81 91