table circular saw type TKSS-500
table circular saw type TKSS-500
table circular saw type TKSS-500
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>table</strong> <strong>circular</strong> <strong>saw</strong><br />
<strong>type</strong> <strong>TKSS</strong>-<strong>500</strong><br />
front view<br />
conception from behind
<strong>table</strong> <strong>circular</strong> <strong>saw</strong> <strong>type</strong> <strong>TKSS</strong>-<strong>500</strong><br />
Short description (standard model)<br />
• Machine frame made of heavy steel sheet with openings to drive below<br />
• Machine <strong>table</strong> is made of ribbed cast iron<br />
• Swivelling <strong>saw</strong> blade 0° to 45°.<br />
• Circular <strong>saw</strong> protecting device with narrow and wide suction hood for <strong>saw</strong> blade up to<br />
diameter <strong>500</strong>mm and cutting height 180mm.<br />
• Brake motor, electric circuits according to VDE 0113<br />
• CE-certificate and the BG certificate "wood dust inspected"<br />
Technical Data<br />
brake motor 7.5kW /10hp / 400V / 50Hz<br />
rotational speeds 2800/4000/<strong>500</strong>0rpm<br />
diameter of the <strong>saw</strong> blade up to <strong>500</strong>mm<br />
cutting height by 0° up to 180mm<br />
cutting height by 45° up to 130mm<br />
swivelling range from 0° to 45°<br />
cutting on the right side of <strong>saw</strong> blade up to 600mm<br />
suction connection diameters 80 and 120mm<br />
weight about 750kg<br />
Special accessories<br />
• pole change brake motor 7,4/8,3kW; 9,5/11hp for 2250/4<strong>500</strong>rpm<br />
• mitre cut stop 2x45° guided in the groove of the <strong>table</strong><br />
• <strong>table</strong> extension with cutting width 1250mm at the right side of <strong>saw</strong> blade cross slide for<br />
squaring and cutting to length stop up to 3000mm; (cutting to length stop used as mitre<br />
cut stop , mitre angle 30° to 90°)<br />
• laser equipment<br />
• hydraulic lifting and swivelling including digital display for swiveling<br />
• electric height and swivel adjustment<br />
• digital display for swivel adjustment and for cutting width 600/1250mm
<strong>saw</strong> blade up to diameter<br />
<strong>500</strong>mm and cutting height<br />
180mm<br />
mitre cut stop 2x45° guided in the<br />
groove of the <strong>table</strong><br />
cutting to length stop used as mitre cut stop , mitre angle 30°- 90°-45 °
adjustment the <strong>saw</strong> aggregate over<br />
handwheel<br />
hydraulic lifting and swivelling<br />
over pedal<br />
VEMA Maschinen GmbH � Rutenweg 22 �D-39291 Möckern<br />
Tel. +49(0)39221-60387 � Fax:+49(0)39221-60388<br />
E-mail: info@vema-online.de<br />
Internet: www.vema-online.de<br />
stop with fine tuning<br />
actuation over two<br />
v-belt