Electric Curtain Track Systems

4Silent Gliss ®

Electric Curtain Track SystemSilent Gliss ® 5070 Dawn & DuskProduct Information• Purpose designed for light-medium weight domestic use only.• Easy wall or ceiling fix.• White only.• No pre-wiring necessary.• Non-stretch belt operation.• Choice of operating methods - either fixed switch or via Dawn & Dusk sensor.• Automatic end-of-travel stop. The fixed switch stops curtains at any point.• Excellent security device when homes are unoccupied.• Straight only.• Delivered made-to-measure and ready to fit. Cannot be cut down on site.5070Silent Gliss ® 5

Profile, Bending and Specification Information30.526Cannot be bent5.50940Specification Guide - download from Silent Gliss ExtranetSilent Gliss 5070 curtain track, electrically operated, white powder coated aluminium, complete and assembled with motor 0941, internal drivebelt, gliders 0967 at 12/m. 0940 profile, ceiling or wall fix with brackets 0979 at 500mm centres each screwed to timber/plugged and screwed.To be installed correctly according to Silent Gliss fitting instructions. …………….LmSystem Dimensions5m15kgFitting InformationBracket and profile Positioning9 cm 50 cm 50 cm 9 cm5070BABrackets should be equally spaced maximum 50 cm apart.The universal bracket 0979 can be used for:A: wall fixing (vertical adjustment) andB: for optional ceiling fixing1Clip the track (1) onto brackets as shown until the track locks intoposition with a click.2To release track again if necessary, push bracket ring (2) and removetrack.Installation GuideBCAA: Dawn to dusk sensorB: SwitchC: TransformerUsual positioning of system with control unit hidden from view bycurtain.The system is delivered including a detailed installation and user guide.6Silent Gliss ®

Fitting OptionsWall or ceiling fixing with univeral bracket 0979592349min 50370979Universal bracketStandard Accessories0940 Profile 0941 Motor 09410942 Transformer 0943 Light sensor switch0944 Switch 0966 Belt0967 Gliders 0969 Master carrier cover0970 Adjustable master carrier 0979 Universal bracketUseful InformationThe 5070 Dawn & Dusk system is only suitable for single or pair stack curtains.5070Motor and Controls InformationMotor Silent Gliss 0941175• Torque: 1.2Nm• Voltage: 24V DC• Power: 0.8A• CEE Standard• Weight: 415gSilent Gliss ®7

Operation MethodsSupply 230V(2 + )Supply 24V dc(2 core)Flat Signal cable(200cm)Flat Signal cable(95cm)Supplied with both fixed switch and Dawn & Dusk sensor. Fixed switch can be used to overide sensor.50708Silent Gliss ®

Electric Curtain Track SystemSilent Gliss ® 5080 Timer SelectWith Optional Remote Control (AR)Product Information• Purpose designed for light-medium weight domestic use only.• Easy wall or ceiling fix.• White only.• No pre-wiring necessary.• Non-stretch belt operation.• 5080 Timer Select allows programming of opening and closing times of curtains andincorporates an overriding switch. It may also be set to operate on a Dawn & Dusk basiswith daylight level. Alternatively it can open with the sensor and close on the timer andvice versa.• The optional auto remote (AR) provides additional remote control handset and IR sensor.• Automatic end-of-travel stop. Switches incorporated into the timer allow curtains to bestopped at any point.• Excellent security device when homes are unoccupied.• Straight only.• Delivered made-to-measure and ready to fit. Cannot be cut down on site.5080Silent Gliss ® 9

Profile, Bending and Specification Information30.5265.50940Specification Guide - download from Silent Gliss ExtranetSilent Gliss 5080/5080AR curtain track, electrically operated, white powder coated aluminium, complete and assembled with motor 0941, internaldrive belt, gliders 0967 at 12/m. 0940 profile, ceiling or wall fix with brackets 0979 at 500mm centres each screwed to timber/plugged andscrewed. To be installed correctly according to Silent Gliss fitting instructions. ……………LmSystem Dimensions5m15kgSystem Options5080 Timer Select5080 Timer select allows programming of opening and closing times ofthe curtains and incorporates an overriding manual switch, (cable lengthtimer to mains power is 285cm).50800946 09475080 AR Timer select including option Auto Remote (AR)5080AR curtain track system including the infra-red auto remote control0949 provides also all the features of the Timer Select version. (cablelength timer 0946 to IR sensor 0963 is 100cm)09640963 09460949Fitting InformationBracket and profile positioning9 cm 50 cm 50 cm 9 cmBrackets should be equally spaced maximum 50 cm appart.AThe universal bracket 0979 can be used for:BA: Wall fixing (vertical adjustment) andB: Optional ceiling fixing10Silent Gliss ®

12Clip the track (1) onto brackets (2) as shown until the track locks intoposition with a click.To release track again if necessary, push bracket ring and remove track.Installation guideBCAA: Dawn to dusk sensorB: IR Sensor (for use with remote handset)C: Timer UnitUsual positioning of system with control unit hidden from vew by curtain.The system is delivered including a detailed installation and user guide.Fitting OptionsWall or Ceiling fixing with universal bracket 0979592349min 50370979Universal bracketStandard Accessories0940 Profile 0945 Motor0946 Timer 0947 ????50800966 Belt 0967 Gliders0969 Master carrier cover 0970 Adjustable master carrier0979 Universal bracketOptional Accessories0949 Remote control handset 0963 IR sensor0964 IR sensor fixing hookSilent Gliss ® 11

Motor and Controls InformationMotor Silent Gliss 0945160• Torque: 1.2Nm• Voltage: 24V DC• Power: 1.2A• CEE Standard• Weight: 385gOperation methodsRemote ControlSupply 230V(2 + )Supply 24V dc(2 core)Flat Signal cable(190cm)Choice of various control functions. From fixed switch to timer and remote control.508012Silent Gliss ®

Electric Curtain Track SystemSilent Gliss ® 5100Product Information• Motorized curtain track system for contract as well as residential use.• The maximum size of the system depends on fabric weight, application and the motoroption. Straigth applications with single or double stack can go up to a max. width of 10 m.The max. curtain weight is 46 kg.• Stacking: single, pair and multiple stacks. For symmetric applications.• Large and attractive fabric offer.• Easy ceiling or wall fix. Recess fixing possible. The motors can also be mounted above theprofile.• The minimum bending radius is 25 cm.• Strong elegant appearance.• Standard colours: anodised aluminium or white powder coated.• The system 5100 can be equiped with 3 different, precision-engineered Swiss motoroptions, depending on the application: Silent Gliss 5100 BASIC (Motor 9012), Silent Gliss5100 ELECTRONIC (Motor 9011) and Silent Gliss 5100 INTELLIGENT (Motor 9010).• Various operation methods available. See motors/controls overview chart and the specificmotor variations section.• Supplied complete with motor connected.5100Silent Gliss ® 13

Profile and Bending InformationMain Profile24.4Recess profile for suspended ceilings3221.4Min. radius 25 cm7251165.42191Recess profile72245117How to measureAA: system widthSystem Dimensions510010 m 46 kg14Silent Gliss ®

Max. Curtain Weight Chart2 m4 m 6 m 8 m 10 m444240383644424038364036312722403631272232282420163228242016201816201816(kg max.)System 5100 is supplied with various motor options. For exact maximum dimensions, please refer to the Maximum Curtain Weight Charts in theMotors & Controls section.It is essential with electrically-operated curtain tracks to choose a system which can readily cope with the specific demands to be placed on it.The most crucial factor is the total weight of the curtains to be transported by it, but then come further questions such as how the curtains are tostack, are there bends involved, ceiling or wall fix, the type of curtain heading etc.System OptionsWave curtain heading systemThe Wave is an exciting new contemporary curtain heading systemwhich allows curtains to hang in a continuous wave which is smooth,simple and elegant.The Wave components are:510060806345 6346 3582 6349 63636345 Glider Cord 60mm6346 Glider Cord 80mm3582 Hook6349 Curtain tape6363 Iron tapeSilent Gliss ®15

Fitting InformationFor all electrically operated curtain track systems, a connection point should be made available at a distance of no greater than 1 metre from themotor. This should be discreetly situated behind the curtain taking care that the motor will not obstruct access to the socket.Bracket and Profile Positioning15 cm 20 - 60 cm 20 - 60 cm 10 cmThe effective measures are defined by the actual height and width of thecurtain, its structure and make-up type.Higher edge of profile to the room side.Motors can be recessed in hollow ceilings350220With profile surface mounted on the ceiling.5100370250With profile recessed into ceiling.Fixing PreparationWhere the system is to be fitted to the ceiling, (recommended in most cases), the surface must be absolutetly flat. Any unevenness will causeproblems in fitting the clamps and will almost certainly affect the functioning of the system.16Silent Gliss ®

Fitting OptionsCAD download through Silent Gliss Intranet/e-catalogueCeiling fitting with clamp 382580 -100 3825ClampCeiling fitting with bracket 382627 2780 -1003826Bracket (26.6mm)Ceiling fitting with bracket 3832203880 - 1003832Bracket (36mm)5100Recess fitting in suspended ceiling with recess profile 5116 and hanger 62686268511651181730495272725116Recess Profile32226268Hanger78405118Wedge2264.5 725114Cover17.6Silent Gliss ®17

Recess fitting with recess profile 51163051185116495272725116Recess Profile32405118Wedge2264.5 725114Cover17.6Recess fitting with recess profile 5117222264.5 7251185117495272725117Recess Profile24405118Wedge5114Cover17.6Wall fitting with bracket 38362727625100533836Bracket (62mm)Wall fitting with brackets 3134-39 and bracket 3826X (mm)93134 533135 733136 9360 20027 2760X3137 1133138 1433139 193503134-39Brackets163826Bracket (26.6mm)3133Bracket cover(60mm)Brackets feature thread for screw M4x8 for fixing the bracket 3826.18Silent Gliss ®

Wall fitting with adjustable bracket support 3271 / bracket plates 3272-74 and bracket 3826X (mm)3271/3272 73-1083271/3273 95-1253271/3274 125-1554554201669 12227 27X3271Bracket support3272-74Bracket plates3826Bracket (26.6mm)Brackets 3275-3277 are a combination of bracket support 3271 and bracket arm 3272, 3273 or 3274. Brackets feature thread for screw M4x8for fixing the bracket.Wall fitting with bracket support 3222 / bracket plates 3226-29 and bracket 3832X (mm)323222/3226 923222/3227 1323222/3228 182706616752052038X3222/3229 2223222Bracket support3226-29Bracket plates3832Bracket (36mm)Brackets feature thread for screw M4x6 for fixing the bracket 3832.Wall fitting with brackets 3134-9 and bracket 3832X (mm)93134 703135 903136 11060 200203860X3137 1303138 1603139 210503134-39Brackets163832Bracket (36mm)3133Bracket cover(60mm)5100Brackets feature thread for screw M4x8 for fixing the bracket 3832.Wall fitting with adjustable bracket support 3271 / bracket plates 3272-74 and bracket 3832XX (mm)3271/3272 80-1153271/3273 102-1323271/3274 132-1624554203271Bracket support1669 1223272-74Bracket plates20383832Bracket (36mm)Brackets 3275-3277 are a combination of bracket support 3271 and bracket arm 3272, 3273 or 3274. Brackets feature thread for screw M4x8for fixing the bracket.Silent Gliss ®19

Wall fitting with bracket support 3222 / bracket plates 3226-29 and bracket 3826X (mm)323222/3226 773222/3227 1173222/3228 1677066167520527 27X3222/3229 2073222Bracket support3226-29Bracket plates3826Bracket (26.6mm)Standard AccessoriesSingle Parts2191 Profile 2193 Belt return5004 Overlap arm 5005 Master carrier5110 Mask 5113 Gear drive5120 Pilot runner 5127 Safety device5130 Driving Belt 5147 Support6098 Roller 9010 Intelligent motor (3Nm)51009101 Securing bowSets9111 Guide Set, containing 2193 Belt return 15004 Overlap arm 15005 Master carrier 15110 Mask 15113 Gear drive 15120 Pilot runner 120Silent Gliss ®

5127 Safety device 15147 Support 19101 Securing bow 15100Silent Gliss ® 21

Optional AccessoriesSingle Parts3133 Bracket cover (60mm) 3134 Bracket (60mm)3135 Bracket (80mm) 3136 Bracket (100mm)3137 Bracket (120mm) 3138 Bracket (150mm)3139 Bracket (200mm) 3222 Bracket support3271 Bracket support 3272 Bracket plate (69mm)3273 Bracket plate (92mm) 3274 Bracket plate (122mm)3825 Clamp 3826 Bracket (26.6mm)3832 Bracket (36mm) 3836 Bracket (62mm)5063 Overlap arm 5112 Mask5114 Cover 5115 Connecting bridge51005116 Recess Profile 5117 Recess Profile5118 Wedge 6007 Endstop6086 Spring stop 6268 Hanger6283 Roller 6349 Curtain tape9011 Electronic motor (3Nm) 9012 Basic motor (1.5 and 3Nm)Sewing Accessories22Silent Gliss ®

3582 Hook 3599 Hook6004 Eyelet 6005 HookUseful Measures2193 Belt return51 3623.55004 Overlap arm301273024555113 Gear drive80 515114 Cover64.5 7217.65116 Recess Profile72325117 Recess Profile7224Overview Motors and ControlsMotor FeaturesInterference freeElectronic limit settings (with memory to protect against power failure)Thermal overload protectionTorqueMeets CEE and VDE standardsShaft rotation reversibleSingle switch operationCan be stopped at any postitionLONWorks bus technology approved9012 Basic1.5 / 3 Nm9011 Electronic3 Nmprog.9010 Intelligent3 Nmprog.5100Control FeaturesMains 230V simultaneous and / or individual operationLow voltage individual operationLow voltage simultaneous operationRemote control 9920, simultaneous and / or individual operationControl unit 9900, simultaneous or individual operation, additional functions like timer or multiple stopThese features represent only a small selection of a multitude of various control options.Silent Gliss ®23

Version BASIC (Motor Silent Gliss 9012)Motor Silent Gliss 9012 BASIC80462204060• Supplier: MicroMotor/Silent Gliss• Torque: 1.5 Nm or 3 Nm• Voltage: 230 V / 115 V / 100 V• Frequency: 50 Hz / 60 Hz / 50 Hz• Power: 80 W / 90 W / 70 W (1.5 Nm) and 120 W / 125 W / 105 W (3Nm)• Current: 0.45 A / 0.95 A / 0.8 A (1.5 Nm) and 0.6 A / 1.2 A / 1.1 A(3 Nm)• Speed: 80 rpm / 100 rpm / 80 rpm (1.5 Nm) and 90 rpm / 110 rpm/ 90 rpm (3 Nm)• Thermal overload protection• CEE Standard• Electronic end stop• Weight: 0.9 kgThe Silent Gliss 9012 motor is designed for simple low cost applications. Right/left shaft rotation is possible by reversing the wiring. This gives moreflexibility when installing multiple systems. The entire motor is hidden behind the curtain.Max. Curtain Weight Chart (3 Nm or 1.5 Nm)2 m4 m 6 m 8 m 10 m4442403836444240383640363127224036312722322824201651003220281824162016201816(kg max.)2 m4 m 6 m20201818141016128(kg max. / 1.5 Nm)24Silent Gliss ®

Operating MethodsCombination of wall switch and multiple motorsA: 230V/115VThe “Open-Close-Stop” function can only be operated by maintenedswitch.Electronic opertion with “Open-Close-Stop” at any desired positionSimultaneous or individual operation of single or multiple systems, bylow voltage switch onlyUp to 15 systems can be operated via low voltage or mains connectionswithout relaysAWiring and ConnectionsImportant: For these information please refer to our special section in the extranet.Version ELECTRONIC (Motor Silent Gliss 9011)Motor Silent Gliss 9011 ELECTRONIC46802204060• Supplier: MicroMotor/Silent Gliss• Torque: 3 Nm• Voltage: 230 V / 115 V / 100 V• Frequency: 50 Hz / 60 Hz / 50 Hz• Power: 120 W / 125 W / 105 W• Current: 0.6 A / 1.2 A / 1.1 A• Speed: 90 rpm / 110 rpm / 90 rpm• Thermal overload protection• CEE Standard• Electronic end stop• Weight: 1.2 kg5100The Silent Gliss 9011 motor is designed to offer advanced features and electronics for sophisticated applications. Various systems can also beoperated from low voltage switches individually or simultaneously.Electronic limit setting (with memory to protect against power failure) and right/left programming offer more flexibility when installing multiplesystems. The entire motor is hidden behind the curtain.Silent Gliss ®25

Max. Curtain Weight Chart2 m4 m 6 m 8 m 10 m444240383644424038364036312722403631272232282420163228242016201816201816(kg max.)Operating MethodsCombination of wall switch and multiple motorsA: 230V/115V mains individualB: Low Voltage simultaneousC: Low Voltage individual5100AAElectronic opertion with “Open-Close-Stop” at any desired positionSimultaneous or individual operation of single or multiple systems, bylow voltage switch onlyUp to 15 systems can be operated via low voltage or mains connectionswithout relaysWith a fixed low voltage switch an almost infinite number of systems canbe operated individually or simultaneouslyBCCWiring and ConnectionsImportant: For these information please refer to our special section in the extranet.26Silent Gliss ®

Version INTELLIGENT (Motor Silent Gliss 9010)Motor Silent Gliss 9010 INTELLIGENT46802204060• Supplier: MicroMotor/Silent Gliss• Torque: 3 Nm• Voltage: 230 V / 115 V / 100 V• Frequency: 50 Hz / 60 Hz / 50 Hz• Power: 120 W / 125 W / 105 W• Current: 0.6 A / 1.2 A / 1.1 A• Speed: 90 rpm / 110 rpm / 90 rpm• Thermal overload protection• CEE Standard• Electronic end stop (with memory)• Weight: 1.2 kgThe Silent Gliss 9010 motor offers the latest BUS technology for modern building management applications and a total compatibility withLonWorks BUS technology.A vast choice of control features make this system one of the most advanced and intelligent systems on the market. For remote controlapplications, mixed voltage systems and home automation.Right/left programming offer more flexibility when installing multiple systems. Multiple stop for home theatres enables electronic setting ofintermediate positions (only with control unit Silent Gliss 9900). The entire motor is hidden behind the curtain.Max. Curtain Weight Chart2 m4 m 6 m 8 m 10 m4442403836444240383640363127224036312722510032282420163228242016201816201816(kg max.)Silent Gliss ®27

Operating MethodsCombination of Control Unit / transmitter / wall switch / multiple motorsB9900A: 230V/115VB: LonWorks° Bus9900 Control Unit9930 Transmitter9930ACombination of IR-Eye / transmitter / wall switch / multiple motorsAAA: 230V/115VB: Low voltage9930 Transmitter and 9922 Infrared Eye5100max.20 m9922B9922B9930Wiring and ConnectionsImportant: For these information please refer to our special section in the extranet.28Silent Gliss ®

Electric Curtain Track SystemSilent Gliss ® 5140Product Information• Motorized 2-channel curtain track system for contract use.• Unlimited overlapping of the curtains without the need of an overlap arm due to 2-channelprofile.• The maximum size of the system depends on fabric weight, application and the motoroption. Straigth applications with single or double stack can go up to a max. width of 10 m.The max. curtain weight is 46 kg.• Stacking: single, pair and multiple stacks. For symmetric and asymmetric applications.• Large and attractive fabric offer.• Easy ceiling or wall fix. Recess fixing possible. The motors can also be mounted above theprofile.• The minimum bending radius is 50 cm.• Strong elegant appearance.• Standard colours: anodised aluminium or white powder coated.• The system 5140 can be equiped with 3 different, precision-engineered Swiss motoroptions, depending on the application: Silent Gliss 5100 BASIC (Motor 9012), Silent Gliss5100 ELECTRONIC (Motor 9011) and Silent Gliss 5100 INTELLIGENT (Motor 9010).• Various operation methods available. See motors/controls overview chart and the specificmotor variations section.• Supplied complete with motor connected.5140Silent Gliss ® 29

Profile and Bending Information49.420.9Min. radius 50 cm5.45141How to measureAA: system widthSystem Dimensions10 m 46 kgMax. Curtain Weight Chart51402 m444 m 6 m 8 m 10 m42 40 38 3644424038364036312722403631272232282420163228242016201816201816(kg max.)System 5140 is supplied with various motor options. For exact maximum dimensions, please refer to the Maximum Curtain Weight Charts in theMotors & Controls section.It is essential with electrically-operated curtain tracks to choose a system which can readily cope with the specific demands to be placed on it.The most crucial factor is the total weight of the curtains to be transported by it, but then come further questions such as how the curtains are tostack, are there bends involved, ceiling or wall fix, the type of curtain heading etc.30Silent Gliss ®

Fitting InformationFor all electrically operated curtain track systems, a connection point should be made available at a distance of no greater than 1 metre from themotor. This should be discreetly situated behind the curtain taking care that the motor will not obstruct access to the socket.Bracket and Profile Positioning15 cm 30 60 cm 30 60 cm 10 cmThe effective measures are defined by the actual height and width of thecurtain, its structure and make-up type.Motors can be recessed in hollow ceilings350220With profile surface mounted on the ceiling.5140370250With profile recessed into ceiling.Fixing PreparationWhere the system is to be fitted to the ceiling, (recommended in most cases), the surface must be absolutely flat. Any unevenness will causeproblems in fitting the clamps and will almost certainly affect the functioning of the system.Silent Gliss ®31

Fitting OptionsCAD download through Silent Gliss Intranet/e-catalogueCeiling fitting with clamp 3033/30445858100 1503033Clamp3044ClampWall fitting with bracket 3239 and clamp 3033/3044701703058581503239Bracket (170mm)3033Clamp3044ClampWall fitting with bracket support 3222 / bracket plates 3227-29 and clamp 3033/3044X (mm)3222/3227 1123222/3228 162323222/3229 202706616115205585140X3222Bracket support3227-29Bracket plates3033Clamp583044ClampStandard AccessoriesSingle Parts2613 Connector (38mm) 2962 Connecting bridge3033 Clamp 3044 Clamp5005 Master carrier 5110 Mask32Silent Gliss ®

5112 Mask 5113 Gear drive5120 Pilot runner 5127 Safety device5130 Driving Belt 5141 Profile5143 Belt return 5147 Support6006 Glider 6086 Spring stop6098 Roller 6283 Roller9010 Intelligent motor (3Nm) 9101 Securing bowSets9112 Guide Set, containing 5113 Gear drive 15143 Belt return 15144 Adapter 15147 Support 151405005 Master carrier 25120 Pilot runner 15110 Mask 25112 Mask 15127 Safety device 12613 Connector (38mm) 1Silent Gliss ® 33

Optional AccessoriesSingle Parts3222 Bracket support 3227 Bracket plate (115mm)3228 Bracket plate (165mm) 3229 Bracket plate (205mm)3239 Bracket (170mm) 3832 Bracket (36mm)5120 Pilot runner 5146 Runner5328 Master carrier 5329 Pilot runner5330 Wire holder 5778 Modular plug5779 Flat cable 6083 Glider6094 Roller 6283 Roller9011 Electronic motor (3Nm) 9012 Basic motor (1.5 and 3Nm)Sets51405148 Asymmetric set, containing 5146 Runner 15328 Master carrier 15329 Pilot runner 15330 Wire holder 2Sewing Accessories3012 Hook 3582 Hook3599 Hook 6004 Eyelet34Silent Gliss ®

6005 HookUseful Measures2962 Connecting bridge150395003 Overlap arm straight2413580 51375113 Gear drive5143 Belt return525144 Adapter305778 Modular plug6.657.512.3 7.65779 Flat cable54 x 0.14Overview Motors and ControlsMotor FeaturesInterference freeElectronic limit settings (with memory to protect against power failure)Thermal overload protectionTorqueMeets CEE and VDE standardsShaft rotation reversibleSingle switch operationCan be stopped at any postitionLONWorks bus technology approved9012 Basic1.5 / 3 Nm9011 Electronic3 Nmprog.9010 Intelligent3 Nmprog.5140Control FeaturesMains 230V simultaneous and / or individual operationLow voltage individual operationLow voltage simultaneous operationRemote control 9920, simultaneous and / or individual operationControl unit 9900, simultaneous or individual operation, additional functions like timer or multiple stopThese features represent only a small selection of a multitude of various control options.Silent Gliss ® 35

Version BASIC (Motor Silent Gliss 9012)Motor Silent Gliss 9012 BASIC80462204060• Supplier: MicroMotor/Silent Gliss• Torque: 1.5 Nm or 3 Nm• Voltage: 230 V / 115 V / 100 V• Frequency: 50 Hz / 60 Hz / 50 Hz• Power: 80 W / 90 W / 70 W (1.5 Nm) and 120 W / 125 W / 105 W (3Nm)• Current: 0.45 A / 0.95 A / 0.8 A (1.5 Nm) and 0.6 A / 1.2 A / 1.1 A(3 Nm)• Speed: 80 rpm / 100 rpm / 80 rpm (1.5 Nm) and 90 rpm / 110 rpm/ 90 rpm (3 Nm)• Thermal overload protection• CEE Standard• Electronical end stop• Weight: 0.9 kg•The Silent Gliss 9012 motor is designed for simple low cost applications. Right/left shaft rotation is possible by reversing the wiring. This gives moreflexibility when installing multiple systems. The entire motor is hidden behind the curtain.Max. Curtain Weight Chart (3 Nm or 1.5 Nm)2 m4 m 6 m 8 m 10 m4442403836444240383640363127224036312722322824201651403220281824162016201816(kg max.)2 m4 m 6 m20201818141016128(kg max. / 1.5 Nm)36Silent Gliss ®

Operating MethodsCombination of wall switch and multiple motorsA: 230V/115VThe “Open-Close-Stop” function can only be operated by maintenedswitch.Electronic opertion with “Open-Close-Stop” at any desired positionSimultaneous or individual operation of single or multiple systems, bylow voltage switch onlyUp to 15 systems can be operated via low voltage or mains connectionswithout relaysAWiring and ConnectionsImportant: For these information please refer to our special section in the extranet.Version ELECTRONIC (Motor Silent Gliss 9011)Motor Silent Gliss 9011 ELECTRONIC46802204060• Supplier: MicroMotor/Silent Gliss• Torque: 3 Nm• Voltage: 230 V / 115 V / 100 V• Frequency: 50 Hz / 60 Hz / 50 Hz• Power: 120 W / 125 W / 105 W• Current: 0.6 A / 1.2 A / 1.1 A• Speed: 90 rpm / 110 rpm / 90 rpm• Thermal overload protection• CEE Standard• Electronic end stop• Weight: 1.2 kg•5140The Silent Gliss 9011 motor is designed to offer advanced features and electronics for sophisticated applications. Various systems can also beoperated from low voltage switches individually or simultaneouslyElectronic limit setting (with memory to protect against power failure) and right/left programming offer more flexibility when installing multiplesystems.The entire motor is hidden behind the curtain.Silent Gliss ®37

Max. Curtain Weight Chart2 m4 m 6 m 8 m 10 m444240383644424038364036312722403631272232282420163228242016201816201816(kg max.)Operating MethodsCombination of wall switch and multiple motorsA: 230V/115V mains individualB: Low Voltage simultaneousC: Low Voltage individual5140AAElectronic opertion with “Open-Close-Stop” at any desired positionSimultaneous or individual operation of single or multiple systems, bylow voltage switch onlyUp to 15 systems can be operated via low voltage or mains connectionswithout relaysWith a fixed low voltage switch an almost infinite number of systems canbe operated individually or simultaneouslyBCCWiring and ConnectionsImportant: For these information please refer to our special section in the extranet.38Silent Gliss ®

Version INTELLIGENT (Motor Silent Gliss 9010)Motor Silent Gliss 9010 INTELLIGENT46802204060• Supplier: MicroMotor/Silent Gliss• Torque: 3 Nm• Voltage: 230 V / 115 V / 100 V• Frequency: 50 Hz / 60 Hz / 50 Hz• Power: 120 W / 125 W / 105 W• Current: 0.6 A / 1.2 A / 1.1 A• Speed: 90 rpm / 110 rpm / 90 rpm• Thermal overload protection• CEE Standard• Electronic end stop (with memory)• Weight: 1.2 kg•The Silent Gliss 9010 motor offers the latest BUS technology for modern building management applications and a total compatibility withLonWorks° BUS technology.A vast choice of control features make this system one of the most advanced and intelligent systems on the market. For remote controlapplications, mixed voltage systems and home automation.Right/left programming offer more flexibility when installing multiple systems. Multiple stop for home theatres enables electronic setting ofintermediate positions (only with control unit Silent Gliss 9900)The entire motor is hidden behind the curtain.Max. Curtain Weight Chart2 m4 m 6 m 8 m 10 m4442403836444240383640363127224036312722514032282420163228242016201816201816(kg max.)Silent Gliss ®39

Profile Information49.420.95.45141How to measureAA: system widthSystem Dimensions6 m 20 kgMax. Curtain Weight Chart51502 m184 m 6 m2018192020(kg max.)System 5150 is supplied with various motor options. For exact maximum dimensions, please refer to the Maximum Curtain Weight Charts in theMotors & Controls section.It is essential with electrically-operated curtain tracks to choose a system which can readily cope with the specific demands to be placed on it.The most crucial factor is the total weight of the curtains to be transported by it, but then come further questions such as how the curtains are tostack, etc.42Silent Gliss ®

Fitting InformationFor all electrically operated curtain track systems, a connection point should be made available at a distance of no greater than 1 metre from themotor. This should be discreetly situated behind the curtain taking care that the motor will not obstruct access to the socket.Bracket and Profile Positioning15 cm 30 60 cm 30 60 cm 10 cmThe effective measures are defined by the actual height and width of thecurtain, its structure and make-up type.Motors can be recessed in hollow ceilings350220With profile surface mounted on the ceiling.5150370250With profile recessed into ceiling.Fixing PreparationWhere the system is to be fitted to the ceiling, (recommended in most cases), the surface must be absolutetly flat. Any unevenness will causeproblems in fitting the clamps and will almost certainly affect the functioning of the system.Silent Gliss ®43

Fitting OptionsCAD download through Silent Gliss Intranet/e-catalogueCeiling fitting with clamp 3033/30445858100 1503033Clamp3044ClampWall fitting with bracket 3239 and clamp 3033/3044701703058581503239Bracket (170mm)3033Clamp3044ClampWall fitting with bracket support 3222 / bracket plates 3227-29 and clamp 3033/3044X (mm)3227 1123228 162323229 202706616115205585150X3222Bracket support3227-29Bracket plates3033Clamp583044ClampStandard AccessoriesSingle Parts2962 Connecting bridge 3033 Clamp3044 Clamp 5110 Mask5112 Mask 5113 Gear drive44Silent Gliss ®

5130 Driving Belt 5141 Profile5143 Belt return 5144 Adapter5147 Support 5165 Magnet holder5167 Holder left 5169 Holder right5171 Electronic endstop 5172 Overlap arm5174 Bearing 5183 Mechanical endstop6006 Glider 6086 Spring stop6098 Roller 6283 Roller9010 Intelligent motor (3Nm) 9101 Securing bowSets9113 Guide Set, containing set 5170 plus following parts 5153 Belt guide compl. 1x9101 Securing bow 1x51505144 Adapter 1x5183 Mechanical endstop 2x5110 Mask 2x5147 Support 1x5112 Mask 1x5170Overlap arm set, containingSet 5170 is also included in set 91135167 Holder left 1x5169 Holder right 1xSilent Gliss ® 45

5172 Overlap arm 1x5174 Bearing 1xOptional AccessoriesSingle Parts3222 Bracket support 3227 Bracket plate (115mm)3228 Bracket plate (165mm) 3229 Bracket plate (205mm)3239 Bracket (170mm) 3832 Bracket (36mm)5120 Pilot runner 5778 Modular plug5779 Flat cable 6007 Endstop6083 Glider 6094 Roller6283 Roller 9011 Electronic motor (3Nm)5150Sewing Accessories3012 Hook 3582 Hook3599 Hook 6004 Eyelet6005 HookUseful Measures80 51375113 Gear drive5143 Belt return5246Silent Gliss ®

3020485144 Adapter5171 Electronic endstop57.55172 Overlap arm241375778 Modular plug6.612.3 7.65779 Flat cable54 x 0.14Overview Motors and ControlsMotor FeaturesInterference freeElectronic limit settings (with memory to protect against power failure)Thermal overload protectionTorqueMeets CEE and VDE standardsShaft rotation reversibleSingle switch operationCan be stopped at any positionLONWorks bus technology approved9011 Electronic3 Nmprog.9010 Intelligent3 Nmprog.Control FeaturesMains 230V simultaneous and / or individual operationLow voltage individual operationLow voltage simultaneous operationRemote control 9920, simultaneous and / or individual operationControlunit 9900, simultaneous or individual operation, additional functions like timer or multiple stop5150These features represent only a small selection of a multitude of various control options.Silent Gliss ® 47

Version ELECTRONIC (Motor Silent Gliss 9011)Motor Silent Gliss 9011 ELECTRONIC46802204060• Supplier: MicroMotor/Silent Gliss• Torque: 3 Nm• Voltage: 230 V / 115 V / 100 V• Frequency: 50 Hz / 60 Hz / 50 Hz• Power: 120 W / 125 W / 105 W• Current: 0.6 A / 1.2 A / 1.1 A• Speed: 90 rpm / 110 rpm / 90 rpm• Thermal overload protection• CEE Standard• Electronic end stop• Weight: 1.2 kgThe Silent Gliss 9011 motor is designed to offer advanced features and electronics for sophisticated applications. Various systems can also beoperated from low voltage switches individually or simultaneously. Electronic limit setting (with memory to protect against power failure) and right/leftprogramming offer more flexibility when installing multiple systems. The entire motor is hidden behind the curtain.Max. Curtain Weight Chart2 m4 m 6 m181920201820(kg max.)Operating Methods5150Combination of wall switch and multiple motorsAAA: 230V/115V mains individualB: Low Voltage simultaneousC: Low Voltage individualElectronic opertion with “Open-Close-Stop” at any desired position.Simultaneous or individual operation of single or multiple systems, bylow voltage switch only.Up to 15 systems can be operated via low voltage or mains connectionswithout relays.With a fixed low voltage switch an almost infinite number of systems canbe operated individually or simultaneously.BCC48Silent Gliss ®

Wiring and ConnectionsImportant: For these information please refer to our special section in the extranet.Version INTELLIGENT (Motor Silent Gliss 9010)Motor Silent Gliss 9010 INTELLIGENT46802204060• Supplier: MicroMotor/Silent Gliss• Torque: 3 Nm• Voltage: 230 V / 115 V / 100 V• Frequency: 50 Hz / 60 Hz / 50 Hz• Power: 120 W / 125 W / 105 W• Current: 0.6 A / 1.2 A / 1.1 A• Speed: 90 rpm / 110 rpm / 90 rpm• Thermal overload protection• CEE Standard• Electronic end stop (with memory)• Weight: 1.2 kgThe Silent Gliss 9010 motor offers the latest BUS technology for modern building management applications and a total compatibility withLonWorks BUS technology. A vast choice of control features make this system one of the most advanced and intelligent systems on the market.For remote control applications, mixed voltage systems and home automation. Right/left programming offer more flexibility when installing multiplesystems. Multiple stop for home theatres enables electronic setting of intermediate positions (only with control unit Silent Gliss 9900). The entiremotor is hidden behind the curtain.Max. Curtain Weight Chart2 m184 m 6 m20185150192020(kg max.)Silent Gliss ®49

Operating MethodsCombination of Control Unit / transmitter / wall switch / multiple motorsB9900A: 230V/115VB: LonWorks° Bus9900 Control Unit9930 Transmitter9930ACombination of IR-Eye / transmitter / wall switch / multiple motorsAAA: 230V/115VB: Low voltage9930 Transmitter and 9922 Infrared EyeBB5150max.20 m992299229930Wiring and ConnectionsImportant: For these information please refer to our special section in the extranet.50Silent Gliss ®

Electric Curtain Track SystemSilent Gliss ® 5300Product Information• Motorized 3-channel curtain track system for contract as well as residential applications.• The 5300 is due to the 3-channel profile the most flexible of all systems, offering as wellmultiple and asymmetrical stacking.• Versatile bending possibilities even for such a feavy-duty system thanks to the speciallydesigned cylinder drive belt giving strength with reduced friction.• For medium-heavy to heavy applications. The maximum size of the system depends onfabric weight, application and the motor option. Straigth applications with single or doublestack can go up to a max. width of 25 m. The max. curtain weight is 74 kg.• Large and attractive fabric offer.• Easy ceiling or wall fix. Recess fixing possible. The motors can also be mounted above theprofile.• Neat flat profile. Motor remains hidden behind curtain.• Standard colours: anodised aluminium or white powder coated.• Smooth, silent and fast operation (30cm/sec) with roller gliders.• The system 5300 comes equipped with the strong, reliable precision engineered Swissmotor 5360 with built-in thermal overload protection. (230V ,115V or 100V)• Various operation methods are available. See also the motors/controls overview chart andthe specific motor section.• Manual operating crank available in case of power failure.• Supplied complete with motor connected.5300Silent Gliss ® 51

Profile and Bending Information55.227.5Min. radius 50 cm5.45301How to measureAA: system widthSystem Dimensions25 m 74 kg5300Max. Curtain Weight Chart3 m6 m 9 m 12 m 15 m 20 m 25 m547469646053455474696460534545464542393530454645423935304341383633282543413836332825302723201630272320164037353240383532(kg max.)It is essential with electrically-operated curtain tracks to choose a system which can readily cope with the specific demands to be placed on it. Themost crucial factor is the total weight of the curtains to be transported by it but then come further questions such as how the curtains are to stack,are there bends involved, ceiling or wall fix, the type of curtain heading etc.52Silent Gliss ®

System OptionsFitting InformationFor all electrically operated curtain track systems, a connection point should be made available at a distance of no greater than 1 metre from themotor. This should be discreetly situated behind the curtain taking care that the motor will not obstruct access to the socket.Bracket and Profile Positioning20 cm 50 60 cm 50 60 cm 20 cmThe effective measures are defined by the actual height and width of thecurtain, its structure and make-up type.Motors can be recessed in hollow ceilings330225With profile surface mounted on the ceiling.Fixing Preparation5300Where the system is to be fitted to the ceiling, (recommended in most cases), the surface must be absolutetly flat. Any unevenness will causeproblems in fitting the clamps and will almost certainly affect the functioning of the system.Fitting OptionsCAD download through Silent Gliss Intranet/e-catalogueCeiling fitting with clamp 532062.5100 1505320ClampSilent Gliss ® 53

Sets5317 Master Carrier Set, containing 5313 Carrier 25314 Pilot runner 15315 Wire (ø 2mm) 15316 Pilot runner 17724 Pressure spring 2Optional AccessoriesSingle Parts3222 Bracket support 3227 Bracket plate (115mm)3228 Bracket plate (165mm) 3229 Bracket plate (205mm)3239 Bracket (170mm) 5110 Mask5134 Clip 5201 Roller53005326 Runner 5327 Carrier5328 Master carrier 5329 Pilot runner5330 Wire holder 5331 Steel wire5337 Axle 5774 Electronic amplifier5778 Modular plug 5779 Flat cable5787 Transmitter 5788 Receiver5789 Sensor 6013 EndstopSilent Gliss ® 55

Sets5325 Asymmetric set, containing 5326 Runner 15327 Carrier 15328 Master carrier 15329 Pilot runner 15330 Wire holder 2Sewing Accessories3012 Hook 3581 Hook6004 Eyelet 6005 HookUseful Measures5304 Gear drive885310 Guide return13010053005319 Connecting bridge200505670 Overlap arm2303056Silent Gliss ®

MotorizationMotor Silent Gliss 53601056522560• Supplier: MicroMotor/Silent Gliss• Torque: 5 Nm• Voltage: 230 V / 115 V / 100 V• Frequency: 50 Hz / 60 Hz / 50 Hz• Power: 200 W / 205 W / 160 W• Current: 0.82 A / 1.75 A / 1.60 A• Speed: 90 rpm / 110 rpm / 90 rpm• Thermal overload protection• CEE Standard• Electronical end stop• Weight: 2.3 kgThe Silent Gliss 5360 motor is an interference-free asynchronous motor, designed to offer advanced features.Multiple motors can be individually and/or simultaneously controlled with cost effective and simple low voltage wiring (no relays). The entire motor ishidden behind the curtain.Operating MethodsCombination of wall switch and multiple motors (Mains)A: 230V/115V5300Up to 15 systems can be operated without relays.ASilent Gliss ®57

Combination of wall switch and multiple motors (Low Voltage)AAA: 230V/115V mains individualB: Low Voltage simultaneousC: Low Voltage individualUsing low voltage connections, it is possible to operate one or severalmotors individually or simultaneously.BCCIR Remote Control 5760 in combination with wall switch5788AA5774A: 230V/115V5787 Transmitter5789 IR eye5788 IR receiver5300max. 20 m5789Maximum length of IR wiring 20 m. With amplifyer 5774 the wiring canbe extended up to 100 m.5787Wiring and ConnectionsImportant: For these information please refer to our special section in the extranet.58Silent Gliss ®

Electric Curtain Track SystemSilent Gliss ® 5400Product Information• Motorized curtain track system for contract as well as residential use.• Strong elegant appearance.• The system 5400 is equiped with a new motor available in two power supply options:Motor 9020 AC (90-260V) and Motor 9030 DC (24V).• Option of integrated radio receiver in combination with new Silent Gliss radio remote controlsystem 9940.• Various other operation methods available. See motors/controls overview chart and thespecific motor variations section.• The maximum size of the system depends on fabric weight and application. Straigthapplications with single or double stack can go up to a max. width of 10m. The max. curtainweight is 44kg.• Stacking: single, pair and multiple stacks. For symmetric applications.• Large and attractive fabric offer.• Easy ceiling or wall fix. Recess fixing possible. The motors can also be mounted above theprofile.• The minimum bending radius is 25cm.• Standard colour: white.• Supplied completely with motor connected.5400Silent Gliss ® 59

Profile and Bending InformationMain profile24.4Recess profile for suspended ceilings3221.4Min. radius 25cm7251165.42191Recess profile72245117How to measureAA: System widthSystem Dimensions540010m44kg60Silent Gliss ®

Max. Curtain Weight Chart2 m4 m 6 m 8 m 10 m444240383644424038364036312722403631272232282420163228242016201816201816(kg max.)It is essential with electrically-operated curtain tracks to choose a system which can readily cope with the specific demands placed on it. The mostcrucial factor is the total weight of the curtains transported by it, but then come further questions such as how the curtains are stacked, are therebends involved, ceiling or wall fix, the type of curtain heading etc.System OptionsIntegrated radio receiver for use with Silent Gliss radio control system 9940 (with motors 9021/9031)The motors 9021 AC and 9031 DC feature an integrated radio receiver.Combined with the new Silent Gliss radio control system 9940 thissystem offers maximum comfort with minimum wiring.5400A: 9941 Remote control, 1 channel, 868MHz, resp. 915MHzB: 9942 Remote control, 5+1 channel, 868MHz, resp. 915MHzABWave curtain heading systemThe Wave is an exciting new contemporary curtain heading systemwhich allows curtains to hang in a continuous wave which is smooth,simple and elegant.The Wave components are:60806345 6346 3582 6349 63636345 Glider Cord 60mm6346 Glider Cord 80mm3582 Hook6349 Curtain tape6363 Iron tapeSilent Gliss ®61

Fitting InformationFor all electrically operated curtain track systems, a connection point should be made available at a distance of no greater than 1 metre from themotor. This should be discreetly situated behind the curtain, taking care that the motor will not obstruct access to the socket.Bracket and Profile Positioning15cm 30-60cm 30-60cm 10cmHigher edge of profile to the room side.Motors can be recessed in hollow ceilings33cm26cmWith profile surface mounted with clamp 3825 or bracket 3826/3832 onthe ceiling.10cm 5cm540035cm28cmWith profile 5116 and hanger 6268 recessed into ceiling.10cm 5cmWhere the system is to be fitted to the ceiling, (recommended in most cases), the surface must be absolutely flat. Any unevenness will causeproblems in fitting the clamps and will almost certainly affect the functioning of the system.62Silent Gliss ®

Fitting OptionsCAD download through Silent Gliss Intranet/e-catalogueCeiling fitting with clamp 382580 -100 3825ClampCeiling fitting with bracket 382627 2780 -1003826Bracket (26.6mm)Ceiling fitting with bracket 3832203880 - 1003832Bracket (36mm)5400Silent Gliss ®63

Recess fitting in suspended ceiling with recess profile 5116 and hanger 6268626851165118304952721752L (System length) + 5mm10070725116Recess Profile32226268Hanger78405118Wedge2264.5 725114Cover17.62678 1145185Motor coverRecess fitting with recess profile 51163054005118511649527252L (System length) + 5mm10070725116Recess Profile32405118Wedge2264.5 725114Cover17.62678 1145185Motor cover64Silent Gliss ®

Recess fitting with recess profile 5117225118511749527252L (System length) + 5mm10070725117Recess Profile24405118Wedge2264.5 725114Cover17.62678 1145185Motor coverWall fitting with bracket 3836272762533836Bracket (62mm)Wall fitting with brackets 3134-39 and bracket 3826X (mm)93134 53X3135 733136 933137 1133138 1433139 1935060 2003134-39Brackets1627 273826Bracket (26.6mm)603133Bracket cover(60mm)5400Brackets feature thread for screw M4x8 for fixing the bracket 3826.Wall fitting with adjustable bracket support 3271 / bracket plates 3272-74 and bracket 3826X (mm)3271/3272 73-1083271/3273 95-1253271/3274 125-1554554201669 12227 27X3271Bracket support3272-74Bracket plates3826Bracket (26.6mm)Brackets 3275-3277 are a combination of bracket support 3271 and bracket arm 3272, 3273 or 3274. Brackets feature thread for screw M4x8for fixing the bracket.Silent Gliss ®65

Wall fitting with bracket support 3222 / bracket plates 3226-29 and bracket 3832X (mm)323222/3226 923222/3227 1323222/3228 182706616752052038X3222/3229 2223222Bracket support3226-29Bracket plates3832Bracket (36mm)Brackets feature thread for screw M4x6 for fixing the bracket 3832.Wall fitting with brackets 3134-39 and bracket 3832X (mm)93134 703135 903136 11060 200203860X3137 1303138 1603139 210503134-39Brackets163832Bracket (36mm)3133Bracket cover(60mm)Brackets feature thread for screw M4x8 for fixing the bracket 3832.Wall fitting with adjustable bracket support 3271 / bracket plates 3272-74 and bracket 38325400XX (mm)3271/3272 80-1153271/3273 102-1323271/3274 132-1624554203271Bracket support1669 1223272-74Bracket plates20383832Bracket (36mm)Brackets 3275-3277 are a combination of bracket support 3271 and bracket arm 3272, 3273 or 3274. Brackets feature thread for screw M4x8for fixing the bracket.Wall fitting with bracket support 3222 / bracket plates 3226-29 and bracket 3826X (mm)323222/3226 773222/3227 1173222/3228 1677066167520527 27X3222/3229 2073222Bracket support3226-29Bracket plates3826Bracket (26.6mm)Standard AccessoriesSingle Parts2191 Profile 2193 Belt return66Silent Gliss ®

3825 Clamp 5002 Overlap arm right5004 Overlap arm 5005 Master carrier5110 Mask 5127 Safety device5130 Driving Belt 5147 Support5149 Securing pin 5152 Driving wheel5186 Case gear drive 5685 Contact connector comb. straight6086 Spring stop 6098 Roller9020 Motor 90-260V AC 9030 Motor 24V DCSets9121 Driving set for 5400, containing: 5127 Safety device 15110 Mask 25005 Master carrier 254005147 Support 12193 Belt return 15149 Securing pin 15152 Driving wheel 15186 Case gear drive 1Silent Gliss ® 67

Optional AccessoriesSingle Parts2572 Carrier for 2500 / 1 stack 2573 Carrier for 2500 / pair stack3133 Bracket cover (60mm) 3134 Bracket (60mm)3135 Bracket (80mm) 3136 Bracket (100mm)3137 Bracket (120mm) 3138 Bracket (150mm)3139 Bracket (200mm) 3222 Bracket support3226 Bracket plate (75mm) 3227 Bracket plate (115mm)3228 Bracket plate (165mm) 3229 Bracket plate (205mm)3271 Bracket support 3272 Bracket plate (69mm)3273 Bracket plate (92mm) 3274 Bracket plate (122mm)3328 Clamping piece for bracket 2645 3826 Bracket (26.6mm)54003832 Bracket (36mm) 3836 Bracket (62mm)5112 Mask 5114 Cover5115 Connecting bridge 5116 Recess Profile5117 Recess Profile 5118 Wedge5120 Pilot runner 5185 Motor cover5651 Programming cable 6007 Endstop6094 Roller 6268 Hanger68Silent Gliss ®

6283 Roller 9021 Motor 90-260V AC, radio receiver9031 Motor 24V DC, radio receiverSewing Accessories3582 Hook 3599 Hook6004 Eyelet 6005 HookUseful Measures2193 Belt return51 3623.55004 Overlap arm30127302455Overview Motors and ControlsMotor 902X AC (90-260V)Motor 903X DC (24V)Motor Nr.StandardOptionWith builtin radioreceiver(868MHz/915MHz)9020/9030 9021/90315400Motor FeaturesInterference freeElectronic limit settings (with memory to protect against power failure)Thermal overload protectionMeets the standards ETLl/UL, CE/IECEECB, CCCShaft rotation reversibleSmooth operation with soft start and soft stopAutomatic obstacle detection2 programmable scenes (intermediate stops)Standard status LED indicatorsby wireby wireControl FeaturesSilent Gliss radio remote control 9940 (builtinto motor receiver)Other remote controls (IR, radio) with external devices possibleTimer and Light sensor connections possibleSuitable for all common home automation and bus systemsSwitching by the mains group (max. 3 motors without relays, 12 with relays) and individualSwitching by low voltage inputs group (max. 15 motors) and individual(only 9020)Silent Gliss ® 69

Motor 9020 / 9021 / 9022 / 9023 AC (90-260V)6227292• Supplier: MicroMotor/Silent Gliss• Voltage: 90-260V• Frequency: 50-60Hz• Current: 0.5-1A• Speed: 110rpm• Noise level: < 45dBA (30cm)• Thermal overload protection• ETL/UL, CE/IECEE Standard• Weight: 1kgOperating MethodsCombination of wall switch and multiple motors over the mainsABA: 90-260VB: 90-260V simultaneousThe “Open-Close” function can only be operated by maintened switch.Electronic operation with “Open-Close” at any desired position.Up to 3 systems can be operated via mains connections without relays.From more than 3 up to 12 systems can be operated via mainsconnections only with realys.5400Combination of wall switch and multiple motors over low voltage inputsA: 90-260VB: Low Voltage simultaneousC: Low Voltage individualAElectronic operation with “Open-Close” at any desired position.Simultaneous and/or individual operation of single or multiple systems,by low voltage switch.Up to 15 systems can be operated via low voltage.BCC70Silent Gliss ®

Transmitter and motor(s)A9941A9942A: 90-260V9941 Transmitter 1 channel9942 Transmitter 5+1 channelCombination transmitter and control over low voltage inputs is possible.Inside a sphere of 25m an indefinite numbers of motors can becontrolled over 1 channel.Wiring ConnectionsImportant: For this information please refer to our special section in the extranet.Motor 9030 / 9031 / 9032 / 9033 DC (24V)6227292• Supplier: MicroMotor/Silent Gliss• Voltage: 24V• Current: 2.5A• Speed: 110rpm• Noise level: < 45dBA (30cm)• Thermal overload protection• ETL/UL, CE/IECEE Standard• Weight: 1kgOperating Methods5400Combination of wall switch and multiple motorsA: 24VB: Low Voltage simultaneousC: Low Voltage individualAElectronic operation with “Open-Close” at any desired position.Simultaneous and/or individual operation of single or multiple systems,by low voltage switch.Up to 15 systems can be operated via low voltage.BCCSilent Gliss ®71

Transmitter and motor(s)99419942A: 24V9941 Transmitter 1 channel9942 Transmitter 5+1 channelCombination transmitter and control over low voltage inputs is possible.Inside a sphere of 25m an indefinite numbers of motors can becontrolled over 1 channel.AAWiring ConnectionsImportant: For this information please refer to our special section in the extranet.540072Silent Gliss ®

Electric Curtain Track SystemSilent Gliss ® 5420Product Information• Motorized 2-channel curtain track system for contract as well as residential use.• Unlimited overlapping of the curtains without the need of an overlap arm due to 2-channelprofile.• Strong elegant appearance.• The system 5420 is equiped with a new motor available in two power supply options:Motor 9020 AC (90-260V) and Motor 9030 DC (24V).• Option of integrated radio receiver in combination with the new Silent Gliss radio remotecontrol system.• Option of manual override (additionally combined with the integrated radio receiver).• Various other operation methods available. See motors/controls overview chart and thespecific motor variations section.• The maximum size of the system depends on fabric weight and application. Straigthapplications with single or double stack can go up to a max. width of 10m. The max. curtainweight is 44kg.• Stacking: single, pair and multiple stacks. For symmetric and asymmetric applications.• Large and attractive fabric offer.• Easy ceiling or wall fix.• The minimum bending radius without manual override is 50cm.• Standard colours: anodised aluminium or white powder coated.• Supplied completely with motor connected.5420Silent Gliss ® 73

Profile and Bending InformationMain Profile49.45.420.9Min. bending radius withoutmanual override 50cm.With manual override the profilecan not be bent.5141How to measureAA: System widthSystem Dimensions10m6m (with manualoverride)44kg20kg (with manualoverride)5420Max. Curtain Weight Chart without manual override2 m4 m 6 m 8 m 10 m444240383644424038364036312722403631272232282420163228242016201816201816(kg max.)74Silent Gliss ®

Max. Curtain Weight Chart with manual override2 m4 m 6 m181920201820(kg max.)It is essential with electrically-operated curtain tracks to choose a system which can readily cope with the specific demands to be placed on it.The most crucial factor is the total weight of the curtains to be transported by it, but then come further questions such as how the curtains are tostack, etc.System OptionsIntegrated radio receiver for use with Silent Gliss radio system 9940 (with motors 9021/9031)The motors 9021 AC and 9031 DC feature an integrated radio receiver.Combined with the new Silent Gliss radio control system 9940 thissystem offers maximum comfort with minimum wiring.A: 9941 Remote control, 1 channel, 868MHz, resp. 915MHzB: 9942 Remote control, 5+1 channel, 868MHz, resp. 915MHzABManual override feature with motors 9022/90325420The manual override feature is very helpful for applications where thereis a high risk that the motorised curtain is operated by hand due toproduct unfamiliarity. This could cause product damages (Hotels, etc.).The manual override option also allows the opening of the curtain in theevent of power failure and emergency.The manual override is also available with integrated radio receiver (withmotor 9023/9033).Wave curtain heading systemThe Wave is an exciting new contemporary curtain heading systemwhich allows curtains to hang in a continuous wave which is smooth,simple and elegant.Silent Gliss ®75

The Wave components are:60806345 6346 3582 6349 63636345 Glider Cord 60mm6346 Glider Cord 80mm3582 Hook6349 Curtain tape6363 Iron tapeFitting InformationFor all electrically operated curtain track systems, a connection point should be made available at a distance of no greater than 1 metre from themotor. This should be discreetly situated behind the curtain taking care that the motor will not obstruct access to the socket.Bracket and Profile Positioning15cm 30-60cm 30-60cm 10cmHigher edge of profile to the room side.Motors can be recessed in hollow ceilings33cm26cmWith profile surface mounted on the ceiling with clamp 3033 or 3044.542010cm 5cmWhere the system is to be fitted to the ceiling, (recommended in most cases), the surface must be absolutetly flat. Any unevenness will causeproblems in fitting the clamps and will almost certainly affect the functioning of the system.Fitting OptionsCAD download through Silent Gliss Intranet/e-catalogueCeiling fitting with clamb 3033/30445858100 1503033Clamp3044Clamp76Silent Gliss ®

Wall fitting with bracket 3239 and clamp 3033/3044701703058581503239Bracket (170mm)3033Clamp3044ClampWall fitting with bracket support 3222 / bracket plates 3227-29 and clamp 3033/3044X (mm)3222/3227 1123222/3228 162323222/3229 20270661611520558X3222Bracket support3227-29Bracket plates3033Clamp583044ClampStandard AccessoriesSingle Parts54202613 Connector (38mm) 3033 Clamp5005 Master carrier 5110 Mask5112 Mask 5120 Pilot runner5127 Safety device 5130 Driving Belt5141 Profile 5143 Belt return5144 Adapter 5147 Support5149 Securing pin 5152 Driving wheel5186 Case gear drive 5685 Contact connector comb. straightSilent Gliss ®77

6086 Spring stop 6098 Roller9020 Motor 90-260V AC 9030 Motor 24V DCSets9122 Guide Set, containins beside the 5147 Support also: 5005 Master carrier 25110 Mask 25112 Mask 15120 Pilot runner 25127 Safety device 15143 Belt return 15144 Adapter 15149 Securing pin 154205152 Driving wheel 15186 Case gear drive 1Optional AccessoriesSingle Parts2962 Connecting bridge 3226 Bracket plate (75mm)3227 Bracket plate (115mm) 3228 Bracket plate (165mm)3229 Bracket plate (205mm) 3272 Bracket plate (69mm)3273 Bracket plate (92mm) 3274 Bracket plate (122mm)78Silent Gliss ®

5003 Overlap arm straight 5165 Magnet holder5171 Electronic endstop 5331 Steel wire5402 Driving wheel 5441 Cable comb.5651 Programming cable 5778 Modular plug5779 Flat cable 6007 Endstop6094 Roller 6283 Roller9021 Motor 90-260V AC, radio receiver 9022 Motor 90-260V AC, manual override9023Motor 90-260V AC, radio receiver,manual override9031 Motor 24V DC, radio receiver9032 Motor 24V DC, manual override 9033Motor 24V DC, radio receiver,manual overrideSets9123Driving set for 5420 manual override, containing set5170 plus following parts:5110 Mask 25112 Mask 154205143 Belt return 15144 Adapter 15147 Support 15149 Securing pin 15183 Mechanical endstop 25186 Case gear drive 15402 Driving wheel 1Silent Gliss ® 79

5170Master carrier set for manual overrideSet 5170 is also included in set 91235172 Overlap arm 15174 Bearing 25167 Holder left 15169 Holder right 15148 Asymmetrical Set, containing: 5146 Runner 15328 Master carrier 15329 Pilot runner 15330 Wire holder 1Sewing Accessories3012 Hook 3582 Hook3599 Hook 6004 Eyelet54206005 HookUseful Measures3134-39 Brackets5060 200163226-29 Bracket plates16752053272-74 Bracket plates1669 1225003 Overlap arm straight2413580Silent Gliss ®

375143 Belt return525172 Overlap arm24137Overview Motors and ControlsOptionsMotor 902X AC (90-260V)Motor 903X DC (24V)StandardWith builtin radioreceiver(868MHz/915MHz)With manualoverrideWith builtin radioreceiver andmanual overrideMotor Nr.9020/9030 9021/9031 9022/9032 9023/9033Motor FeaturesInterference freeElectronic limit settings (with memory to protect against power failure)Thermal overload protectionMeets the standards ETLl/UL, CE/IECEECB, CCCShaft rotation reversibleSmooth operation with soft start and soft stopAutomatic obstacle detection2 programmable scenes (intermediate stops)Standard status LED indicatorManual override (secures from damages when drawn by hand)sby wire by wire by wire by wireControl FeaturesSilent Gliss radio control system 9940 (built in radio receiver)Other remote controls (IR, radio) with external devices possibleTimer and Light sensor connections possibleSuitable for all common home automation and bus systemsSwitching by the mains group (max. 3 motors without relays, 12 with relays) and individualSwitching by low voltage inputs group (max. 15 motors) and individual(only 9020)5420Motor 9020 / 9021 / 9022 / 9023 AC (90-260V)6227292• Supplier: MicroMotor/Silent Gliss• Voltage: 90-260V• Frequency: 50-60Hz• Current: 0.5-1A• Speed: 110rpm• Noise level: < 45dBA (30cm)• Thermal overload protection• ETL/UL, CE/IECEE Standard• Weight: 1kgSilent Gliss ® 81

Operating MethodsCombination of wall switch and multiple motors over the mainsABA: 90-260VB: 90-260V simultaneousThe “Open-Close” function can only be operated by maintened switch.Electronic operation with “Open-Close” at any desired position.Up to 3 systems can be operated via mains connections without relays.From more than 3 up to 12 systems can be operated via mainsconnections only with realys.Combination of wall switch and multiple motors over low voltage inputsA: 90-260VB: Low Voltage simultaneousC: Low Voltage individualAElectronic operation with “Open-Close” at any desired position.Simultaneous and/or idividual operation of single or multiple systems, bylow voltage switch.Up to 15 systems can be operated via low voltage.BCC5420Transmitter and motor(s)A9941A9942A: 90-260V9941 Transmitter 1 channel9942 Transmitter 5+1 channelCombination transmitter and control over low voltage inputs is possible.Inside a sphere of 25m an indefinite numbers of motors can becontrolled over 1 channel.Wiring ConnectionsImportant: For this information please refer to our special section in the extranet.82Silent Gliss ®

Motor 9030 / 9031 / 9032 / 9033 DC (24V)6227292• Supplier: MicroMotor/Silent Gliss• Voltage: 24V• Current: 2.5A• Speed: 110rpm• Noise level: < 45dBA (30cm)• Thermal overload protection• ETL/UL, CE/IECEE Standard• Weight: 1kgOperating MethodsCombination of wall switch and multiple motorsAA: 24VB: Low Voltage simultaneousC: Low Voltage individualElectronic operation with “Open-Close” at any desired position.Simultaneous and/or idividual operation of single or multiple systems, bylow voltage switch.Up to 15 systems can be operated via low voltage.BCCTransmitter and motor(s)542099419942A: 24V9941 Transmitter 1 channel9942 Transmitter 5+1 channelCombination transmitter and control over low voltage inputs is possible.Inside a sphere of 25m an indefinite numbers of motors can becontrolled over 1 channel.AAWiring ConnectionsImportant: For this information please refer to our special section in the extranet.Silent Gliss ®83

542084Silent Gliss ®

Electric Curtain Track SystemSilent Gliss ® 5800Product Information• Motorized curtain track system for contract applications.• The 5800 is with its strong and bendable profile the perfect system for very large andheavy installations in a professional environment (stages, etc.).• For applications of up to 60 m length (straight with double stack).• The max. curtain weight is 280 kg. See also separate maximum curtain weight chart.• Extremely wide choice of stacking and bending options including multiple stacking. Forsymmetric applications.• Large and attractive fabric offer.• Profiles can be mounted in parallel for increased overlap.• Non-stretch steel core rope in internal channels.• Floor or wall mounting of motor possible.• Expceptionally neat profile compared to size of system.• Standard colours: anodised aluminium or white powder coated.• Smooth, silent and fast operation (20cm/sec).• The system 5800 comes equipped with the strong (200Nm), reliable and precisionengineered Swiss motor 5805. (230V ,110V or 100V)• Automatic limit switches and built-in thermal overload.• Emergency stop button. Manual operating possible in case of power failure.• Can be used with remote control.• Supplied complete with motor connected.5800Silent Gliss ® 85

Profile and Bending Information3443Min. radius 50 cm105810How to measureAA: system widthParallel Mounting of ProfilesFor better overlapping of the curtains, two profiles can be mounted in parallel. Therefore, a minimum distance of 76 mm must be observedbetween centre parts of return pulleys.System Dimensions580060 m 280 kg86Silent Gliss ®

Max. Curtain Weight Chart10 m20 m 30 m 40 m 50 m 60 m245227210270252234216198180185173160190180170160150140135127120140132124116108100706560756861544740554540605754514845(kg max.)It is essential with electrically-operated curtain tracks to choose a system which can readily cope with the specific demands to be placed on it. Themost crucial factor is the total weight of the curtains to be transported by it but then come further questions such as how the curtains are to stack,are there bends involved, ceiling or wall fix, the type of curtain heading etc.Multiple applications with equally wide curtain stacks are also possible.Fitting InformationFor all electrically operated curtain track systems, a connection point should be made available at a distance of no greater than 1 metre from themotor. This should be discreetly situated behind the curtain taking care that the motor will not obstruct access to the socket.Bracket and Profile Positioning30 cm 50 cm 50 cm30 cm5800This motor is enormously strong and both fixing points and ceiling mustbe accordingly solid. Timber soffit at least 4 cm thick over completelength of track is recommended.Fitting of motorAB190A: Floor Fixing (Optional)B: Wall Fixing (Standard)The steel core rope is tensioned by using the motor weight. Verticalvariation possible up to 190 mm.Silent Gliss ®87

Fitting OptionsCAD download through Silent Gliss IntranetCeiling fitting of track with clamp 6209300 500Wall fitting of motor with 5821/58221510min. 2 m28500223101003205821Anchor rail5822Sliding blockFloor fitting of motor with frame 58135755800min. 2 m3305005813Floor mountingdeviceMotor fitting above trackmin. 2 m88Silent Gliss ®

Standard AccessoriesSingle Parts5805 Motor 5806 Pilot runner5809 Roller 5810 Profile5811 Overlap arm 5814 Steel wire rope5815 Cord guide return 5816 Cord guide5821 Anchor rail 5822 Sliding block5824 Endstop 6203 Connecting bridge6209 ClampOptional AccessoriesSingle Parts5813 Floor mounting device5800Sewing Accessories3581 Hook 6005 HookUseful Measures5809 Roller285811 Overlap arm12412758205755813 Floor mounting device5005814 Steel wire rope330ø 5.3Silent Gliss ®89

705815 Cord guide return40905816 Cord guide704090306203 Connecting bridge 200MotorizationMotor Silent Gliss 5805310485305• Supplier: MicroMotor/Silent Gliss• Torque: 200 Nm• Voltage: 230 V / 115 V• Frequency: 50 V / 60 Hz• Power: 500 W / 550 W• Current: 2.2 A / 5 A• Speed: 15 rpm• Thermal overload Protection• CEE Standard• Mechanical end stop• Weight: 30 kgOperating Methods5800The 5805 motor can be equipped with a fixed switch. The system is compatible with a variety of different other control systems.Wiring and ConnectionsImportant: For these information please refer to our special section in the extranet.90Silent Gliss ®

Silent Gliss ® 915800

www.silentgliss.comwww.silentgliss.comwww.silentgliss.comSilent Gliss International Ltd.Worbstrasse 210CH-3073 GümligenSilent Gliss International Ltd.Worbstrasse 210CH-3073 GümligenSilent Gliss International Ltd.Worbstrasse 210CH-3073 Gümligen92Silent Gliss ®SGI_TB_EL_20070404 /