scandredge - Dredgepoint

scandredgeROV MANIPULATORScandredge ROV Manipulator for operation controlThe Scandredge ROV Manipulator is a five-function ROV manipulator arm, designedfor rougher work than normal. This reduces damage to the ROV’s standardmanipulator, and improving operational efficiency. The manipulator is designed to“pick up and position”, this means when operating the dredge nozzle it may be securedand brought to the “best” working position.This is a five-function, rate-controlled manipulator, designed for ROV dredgingoperations, with nozzle sizes from 10” to 14”.Gismerøyveien 207NO-4515 MandalTel.: +47 38 27 81 00Fax: +47 38 27 81 01postmaster@scanmudring.nowww.scanmudring.no* See separate datasheet for specifications.

scandredgeROV MANIPULATORTECHNICAL SPECIFICATIONGENERALName:Manufacturer:Type:Scandredge ROV ManipulatorScanmudring5 functionWork capabilities: Nozzle handling, 10” – 14”Number of available units:2 operational systemsMaterial of constructionWeight in air (without dredge nozzle)Anodized Al-6082-T6, AISI 316,Scancot, POM133 KgWeight in seawater (without dredge nozzle)101 KgMax reach at head on direction 2.0mMax excavation levelMax front load weightTemperature rangeOperating pressureHydraulic connections-1,5 m150 Kg-18ºC to +40ºCMax. 200 barJIC-7/16-20Approved Hydraulic Fluids, petroleum-based Shell Tellus 32, Mobil DTE 24,Texaco Rando 32Approved Hydraulic Fluids, Glycol-based Houghto-Safe 620Approved Hydraulic Fluids, Vegetable-based Hydro-Safe ISO VG 32Note: All specifications are based on standard system configuration using Shell Tellus 32 hydraulic oil,input pressure of 200 bar, and available flow of 5 lpm (min).This document is the property of Scanmudring (rev.B)Gismerøyveien 207, NO-4515 Mandal, Tel.: +47 38 27 81 00, Fax: +47 38 27 81 01, E-mail: postmaster@scanmudring.nowww.scanmudring.no