D - Slot cutters.FH11 - Canela Tools

Specific applicationsand setsSlot cuttersSlot cuttersCharacteristics:Circular miller.Self-clamping tool with double prism and fixed reference point.The special shape of the chip groove in the insert slot allows a continous chip flow.Each insert cuts over the full cutting edge so that compared to staggered or alternate tooth cutters (prefinishingcutters) the feed per tool revolution can be doubled.Inserts can be changed in less than 10 seconds per insert without removing the cutter from the machine.The inserts are released from the prism with the help of the included assembly-key.DBWhistle-Notch-connectionØ25h6ST-B60Ae1002942.21ST-BBDAeRev maxInsert sizeKgRef. 2942.21.0631.82942.21.0632.42942.21.0633.02942.21.0801.82942.21.0802.42942.21.0803.02942.21.1001.82942.21.1002.42942.21.1003.04445558882,23,04,02,23,04,02,23,04,01,82,43,01,82,43,01,82,43,0636363808080100100100202020262626363636125012501250100010001000800800800573357335733573357335733573357335733FRC.. 2,2FRC.. 3,0FRC.. 4,0FRC.. 2,2FRC.. 3,0FRC.. 4,0FRC.. 2,2FRC.. 3,0FRC.. 4,00,3700,3850,4000,4050,4300,4600,4450,4800,520Porcupine cutters Slot cutterssrFRCFRC.. srSingle-ended insertsRef. FRC 2,2FRC 3,0FRC 4,0FRCR 3,0FRCR 4,02,23,04,03,04,00,200,200,201,502,00Boring heads Drills Solid carbide Profile millingFor more information see page: A.13sFRCRrFRCFRCRArbors andadaptorsCANELAD.13