AC-R128 - Audiocation Audio Akademie

AC -R128• AutomationThe use of automation is something special to this product.You can of course automate the buttons but thespecial feature is the automation curve of the measurementitself. If you start the automation by switching theplug-in into write mode, one of the automation lanes isused as a loudness logging graph.• Please be aware that1. the automation lane indicates only the value of themain measurement and the maximum momentaryvalue. If you switch between the three time modes thegraph will switch too and indicate the new value fromthis point on. To be clear: It is not possible to e.g. log theINTEGRATED value while watching the MOMENTARYmeasurement. They are not logged in three separatelanes! If you need this, you have to use two instancesof the plug-in.2. the automation read feature does not necessarily workflawlessly in all DAWs. Therefore we announce this featurein experimental state and do not support it officiallyat this point. If you need to know the value at a givenposition in time take a look at the graph and not the GUI.3. the automation lane is an approximation of the realloudness progress and provides a good overview withoutqualifying for being a substitute to a real loggingsystem.Programming by Christian-W. Budde | Manufactured by Audiocation & Studio Magazin