Sin t.tulo-3 - Profi-elektro.cz

Tools and Mats for Decorative ConcreteRef. 83952 Ref. 83953Ref. 83963 Ref. 83966Ref. 83965 Ref. 83962 Ref. 83954Ref. 83938Ref. 83935 Ref. 83968Ref. 83967Ref. 83960140DECORATIVE CONCRETE TOOLSREFHigh quality tools for decorative engraved concrete paving.ALUMINIUM CHISEL 1 31 /32” (5 cm.) - 21 oz. (600 gr.). 6 264 8413797839524 83952CONCAVE CHISEL 1 31 /32” (5 cm.) For finishing irregular joints. 6 264 8413797839531 83953ALUMINIUM CHISEL 4" (10 cm.) - 26 Oz. (725 Gr.) 6 - 8413797839630 83963CONCAVE CHISEL 4” (10 cm.) For finishing irregular joints. 6 - 8413797839661 83966• Made of aluminum.• For joint marking after the engraved concrete is molded.TAMPER 7 x 7” (18 x 18 cm.). - 13 Lb. (5800 gr.) 1 - 8413797839609 83960• Rammer to engrave the shape molds on fresh concrete.• Wooden stick included. Ø 1 3 /8" x 47 1 /4" (34 x 1200 mm.).STAINLESS STEEL EDGER-CURVED ENDS 6" x 3" (15 x 12 cm.) 6 - 8413797839623 83962STAINLESS STEEL EDGER WITH STRAIGHT ANGLE 6" x 3" (15 x 12 cm.) 6 - 8413797839654 83965• For finishing after dilatation joints.• Made of high quality stainless steel. For finishing of corners and edges.ROUND END TROWEL 20" x 5" (51 x 12 cm.) 2 - 8413797839388 83938TROWEL 2 ROUNDED EDGES 14 x 5” (38 x 12 cm.). 2 - 8413797839548 83954• Special high-resistance steel bull float.• For smoothing of the finishing dust for engraved concrete.MAGNESIUM FLOAT 16" x 3" (40 x 8 cm.) 6 120 8413797839357 83935MAGNESIUM FLOAT ROUNDED EDGES 16 x 3” (40 x 8 cm.) 6 120 8413797839685 83968• Magnesium Float.• For concrete manual smoothing.RELEASE AGENT FOR DECORATIVE CONCRETE 1.1 GL. (5 L) 3 90 8413797839678 83967• Liquid release agent for decorative concrete.• Application to mortar or fresh cement. Dispensed using spray gun. Covering power: 1467-1712 Sq.ft. / 0.2gl. (30-35 m 2 /L).