Catalog Page: Platinum Temperature Sensors - Kele

TEMPERATUREPLATINUM TEMPERATURE SENSORSAS ROOM, DUCT, OSA, AND IMMERSION SERIESDIMENSIONSin(cm)4.0(10.16)1.88(4.76)1/2" Knockouts1/2" NPT Typicalboth sides1.0(2.54)Stainless SteelProbeLLL5.5(13.97)0.25(0.64)dia2.75(6.98)1.58(4.01)Housing Bottom View4.50(11.43)4.0(10.16)1.88(4.76)1/2" KnockoutsFoam GasketStainless SteelProbeLLL8.0(20.32)AS___080D Duct-Mount Sensor4.63(11.75)0.25(0.64)dia5.5(13.97)AS___055Q Immersion ProbeMounted in Handy BoxHousing Top ViewAS___000SRoom-Mount Sensor1/2" FNPT2.88(7.30)2.0(5.08)AS___040O Outside Air Sensor1.5(3.81)TEMPERATURE*‡790ORDERING INFORMATIONMODEL DESCRIPTIONAS2 Assembly probe for two-wire RTDsAS3 Assembly probe for three-wire RTDs (PD sensors only)‡ PD 100Ω 0.00385 Ω/Ω/°C platinum curve, 6" leadsPF 1000Ω 0.00385 Ω/Ω/°C platinum curve, 6" leads* PW 1000Ω 0.00375 Ω/Ω/°C platinum curve, 6" leadsLLL Length LLL in 0.1" increments 040 = 4.0", 120 = 12.0", 0.000 for all space sensors “S”‡ * D Duct mount, handy-box 1/2" knockouts, LLL typically = 8.0"E Duct mount, weatherproof box, LLL typically = 8.0"‡ * O Outside air, weatherproof box with weather shield, LLL = 4.0"‡ * Q Immersion, handy-box 1/2" knockouts, LLL typically = 5.5" for 6" well insertionP Immersion, weatherproof box, LLL typically = 5.5" for 6" well insertion‡ * S Space, indoor room, wall-mount housing, LLL = 000W Wall mount, outside, weatherproof box, LLL typically 4.0"‡ * 000 No transmitter801 TT-801, 2- or 3-wire fixed range, 100Ω, 385 curve, PD sensor only807 TT-807, 2-wire fixed range, 1000Ω, PW or PF sensor only111 TT-111, 2-wire fixed range, for PD, PF, or PW RTD sensors216 TT-216, XX No 2- transmitter or 3-wire rangeable, 385 curve, PD sensors onlyEN XX Range No transmitter codes per Minco letter ranges (-20°/140°F) or (-29°/60°C)EN S Range codes per Minco letter ranges (0°/100°F) (-20°/140°F) or or (-18°/38°C) (-29°/60°C)A S Range codes per Minco letter ranges (20°/120°F) (0°/100°F) or or (-18°/38°C) (-7°/49°C)BI A Range codes per Minco letter ranges (30°/130°F) (20°/120°F) or (-1°/54°C) (-7°/49°C)KK BIRange codes per Minco letter ranges (30°/130°F) (30°/180°F) or (-1°/54°C) (-1°/82°C)BN KK Range codes per Minco letter ranges (30°/240°F) (30°/180°F) or (-1°/116°C) (-1°/82°C)BN N Range codes per Minco letter ranges (32°/122°F) (30°/240°F) or (0°/50°C) (-1°/116°C)H N Range codes per Minco letter ranges (40°/90°F) (32°/122°F) or or (4°/32°C) (0°/50°C)M HRange codes per Minco letter ranges (40°/90°F) (-50°/50°C) or (4°/32°C)M C Range codes per Minco letter ranges (0°/100°C) (-50°/50°C)BW CRange codes per Minco letter ranges (0°/100°C) (0°/250°C)BW JW Range codes per Minco letter ranges (0°/500°C) (0°/250°C)JW - - Range Fill in range codes code per per Minco Minco letter catalog ranges range (0°/500°C) letters for 111 or 216- - Fill in range code per Minco catalog range letters for 801 111 or 216 807SX - - Special Fill in range code on next per Minco item line, catalog -xxx/-yyyE, range letters i.e., -100°/-50°F for 801 or 807* Normally-stocked items SX * 1 Special No range calibration next data, item sensor line, -xxx/-yyyE, or transmitter i.e., -100°/-50°F‡* Normally-stocked for items “PD”‡ * 21 Sensor/Transmitter No calibration data, matched sensor or at transmitter 0°C with NIST‡ Normally-stocked 100Ω RTDs for “PD”32 Sensor/Transmitter matched at 0°, 0°C 100°, with NIST and 260°C with NIST100Ω RTDs3 Sensor/Transmitter matched at 0°, 100°, and 260°C with NISTRELATED PRODUCTSWB-6 Brass well for AS_ _ _ (P, Q), for 5.5" probes TCC-12 Single application thermal compoundWS-6 Stainless steel well for AS_ _ _ (P, Q), for 5.5" probes TCC-111 Thermal conductive compound 111 ml2008 KELE CATALOG • www.kele.com • USA 888-397-5353 • International 901-382-6084Sample order:AS3PD080D000XX1:8" duct probe with three-wire,100Ω, 385 curve platinum RTDAS2PW055Q000XX1:5.5" immersion probe with twowire,1000Ω, 375 curve RTD