Course 361 - Protecting Linux and UNIX with EVault

Protecting Linux and UNIX with EVault4. Install LinuxAgent• ls –la• You should see that a new directory has been created called Agent-WCC-Linux-6.00.2415.i. Navigate to the newly created directory.• cd Agent-WCC-Linux-6.00.2415a. In the next steps, we’ll go ahead and install and register our Linux Agent tothe EDPM appliance.b. In the directory that was created Agent-WCC-Linux.6.00.2415, there is aninstall script and this is what we’ll run.• ./install.shc. The Agent will install by default into /usr/local/BUAgent. Click Enter.d. The installer will indicate that the directory doesn’t exist. Click Enter tocreate it.e. The default language is English (US). Click Enter to accept this.f. The installer will prompt “Do you wish to register to a Web-based AgentConsole Server?” Click Enter.g. When prompted “What is the Web-based Agent Console address?”, we’llneed to enter the address of our EDPM appliance.• 192.168.0.100h. When prompted “What is the Web-based Agent Console connection port?”,it defaults to Port 8086. Just click Enter to accept the defaults.For access to the Web-based Agent Console, both TCP ports 8086and 8087 must be available. If there are firewalls in place inbetween the Agent and the EDPM appliance, these ports need tobe opened for inbound connections to the Agent machine. Inother words, the Linux Agent listens on these ports.i. When prompted “What is your Web-based Agent Console username?”, theEDPM appliance comes with a default user.• Type user and click Enter.j. When prompted for “What is your Web-based Agent Console password?”,we need to enter the same password we configured when initiallyconfiguring the EVault Console (See Course 101: Initial Setup: TheOnboarding Wizard).• Type I365password and click Enter.k. The Agent should now be installed and ready to configure on the EDPMappliance.5 EVault for Data Protection Manager - ©2010 i365, A Seagate Company