Test Tools Catalog - Brink Techniek

Test Tools CatalogVolume 41, 2011Keeping your worldup and running.

What’s newFluke 381 Remote DisplayClamp Meter with iFlexPart of Fluke’s new family of clamp meters,the Fluke 381 Clamp Meter combines iFlexflexibility with remote reading capability—thebest of both worlds.• Remote display reads measurementsup to 30 feet away• Measure up to 2500 A ac with the iFlex flexiblecurrent probe• 1000 A ac and dc current measurementwith fixed jaw• 1000 V ac and dc voltage measurement• Min/Max/Avg and inrush recording• CAT IV 600 V, CAT III 1000 VFor information on the new 381 Remote DisplayClamp Meter with iFlex see page 4.Remotedisplayand iFlexPowerfulvibrationtestingFluke 810 Vibration TesterThe Fluke 810 Vibration Tester is the mostadvanced troubleshooting tool for mechanicalmaintenance teams who need an answer now.• Utilizes a simple step-by-step process toreport on machine faults, without needingprior measurement history• On-board identification and location ofmost common mechanical faults: bearings,misalignment, unbalance, looseness• 2 GB expandable on-board memory• Four-level fault severity scale• Tri-axial accelerometer reduces measurementtime by 2/3 over single axis accelerometersFor information on the new 810 Vibration Testersee page 52.

Rangesup to10 kV1555 Insulation Resistance TesterFrom motors and generators to cables andswitchgear, Fluke now takes you all the wayto 10 kV.• Ideal for testing a wide range of high voltageequipment• Automatic calculation of Dielectric Absorption(DAR) and Polarization Index (PI) with noadditional setup• Long battery life allows for over 750 testsbetween charges• Measurements can be stored in up to 99memory locations, with each location assigneda unique, user defined label for easy recallFor information on the new 1555 Insulation ResistanceTester see page 25.TiS Building DiagnosticThermal Imaging ScannerFinally! An entry level thermal imager for quick,easy and accurate problem identification andtroubleshooting, designed specifically for thebuilding inspection professional.• Most affordable thermal imager on the marketthat meets proposed RESNET infrared inspectionstandard• 120 x 120 resolution• Large, 3.7 inch display–30 percent larger thancomparable imagers• Rugged body withstands 2 m (6.5 ft) drop test• Award winning ergonomic designFor information on the new TiS Thermal Imagersee page 47.Display30 %larger

Batterycheckbutton2AC VoltAlert Voltage Tester2AC is the latest addition to the VoltAlert ac noncontactvoltage tester family from Fluke, and is designedto be pocket-sized and easy to use. The 2AC tests forenergized circuits and defective grounds. The tip of thepocket-sized tester will glow red if voltage is present.• Voltage detection from 90 V ac to 1000 V ac• Always on, using special low power circuitryto sustain battery life and ensure your 2ACis always ready• Innovative ‘Battery Check’ button function ensuresbattery is in good condition• CAT IV 1000 V overvoltage rated productfor best in class user protectionFor information on the new 2AC VoltAlert see page 21.190 Series II ScopeMeter ®Portable OscilloscopesMultiply your diagnostic powers with the firstCAT III 1000 V/CAT IV 600 V rated, four-channelportable scope on the market. The new Fluke 190Series II brings an unprecedented combination ofperformance and ruggedness into the field.• Fast sample rate: up to 2.5 GS/s with up to400 ps resolution• Deep memory: 10,000 point per tracewaveform capture• Single shot, pulse width and video triggering• Seven-hour, high-performance Li-ion battery isstandard• Two isolated USB ports for memory devices andPC connectivityFor information on the new 190 Series II ScopeMetersee page 42.4channeltesting

Test Tools CatalogVolume 41, 2011ContentsFluke Corporation is the worldleader in compact, professionalelectronic test tools.4ClampMeters8DigitalMultimetersFrom industrialmaintenanceto commercialbuilding operations,Fluke tools deliverthe testing andtroubleshootingcapabilities to keepglobal commerceand industry upand running.Fluke customersare technicians,engineers,electricians, andbuilding diagnosticsprofessionals—people who staketheir reputations ontheir tools.18DistanceMeters22Indoor AirQuality Tools19Earth GroundTesters24InsulationResistance Testers21ElectricalTesters26Power QualityAnalyzers31ProcessCalibration Tools40ScopeMeter®Test Tools44ThermalImaging Tools49Thermometers51IR-Windows52Vibration Tester53Accessorieswww.fluke.com3

Fluke 381 Remote Display True-rmsAC/DC Clamp Meter with iFlexxAll the bells and whistlesThe Fluke 381 Clamp Meter combinesiFlex flexibility with remote readingcapability for the ultimate in innovationand safety.• Remote display reads measurementsup to 30 feet away• iFlex flexible current probeincluded, 18-inch circumference• 2500 A ac current measurementwith iFlex• 1000 A ac and dc curret measurementwith fixed jaw• 1000 V ac and dc voltagemeasurement• Frequency measurement to 500 Hz• 60 kΩ resistance measurement• Min/Max/Avg and inrush recording• CAT IV 600 V, CAT III 1000 V• Three-year warrantySee specifications chart on page 7.Mobile resourcesFluke clamp meters are going mobile.Visit m.fluke.com from anysmartphone foron-the-go tips,videos and inforegarding ournewest clampmeters.Join the conversation!We’ve createdinteractive messagingboards dedicatedto discussing allthings clamp meter.Give us a shout,start a discussion orparticipate in a poll—we’re eager to hearyour thoughts. Visitwww.fluke.com/readyforanythingTrueRMSFluke 365 Detachable JawTrue-rms AC/DC Clamp MeterWhere rugged meets reliableThe Fluke 365 Clamp Meter offers a small,detachable jaw—with four feet of coil—thatmakes it easy to take and read measurements intight or hard-to-reach places.• 200 A ac and dc current measurement• 600 V ac and dc voltage measurement• 6000 Ω resistance measurement• Built-in flashlight• Large, easy-to-read backlight display• Three-year warrantySee specifications chart on page 7.3D virtualdemosWant to see theFluke 376 andFluke 381 ClampMeters up closeand personal? Visit www.fluke.com/clampfamily for links to two 3Dvirtual demos.Recommended accessoriesTL223TL71SureGrip ElectricalPremiumTest Lead SetTest Lead SetSee page 57 See page 57TrueRMSOrdering informationIncluded accessories18-inch iFlex Flexible CurrentProbe, test leads, soft carryingcase, instruction card, safetyinformation sheet, five AAalkaline batteries.Test leads, soft carryingcase, instruction card, safetyinformation sheet, five AAalkaline batteries.ModelsFLUKE-381FLUKE-365Remote Display True-rms AC/DC Clamp Meter with iFlexDetachable Jaw True-rms AC/DC Clamp Meteri2500-10 i2500-1810 inch iFlex Flexible 18 inch iFlex FlexibleCurrent ProbeCurrent ProbeSee page 5 See page 5Check price and availability atwww.fluke.com/wtb-clamps4Clamp MetersFor more information, go to www.fluke.com/clamps

Fluke 370 Series Clamp MetersBe ready for anythingOur new family of true-rms clamp metersprovides a range of state of-the-art feauresto meet even the most demandingob requirements.All four of the new clamp meters havemproved base features such as a large,backlit display, true-rms standard, CAT IVafety rating and a durably constructedbody. Additionally, the 376, 375 and 374are compatible with the iFlex flexibleurrent probe (included with the 376,old separately for the 375 and 374), andprovide increased measurement readingso 1000 A and 1000 V ac and dc.iFlex Flexible Current ProbeSee specifications chart on page 7 fordetails per model.ke uke 373TrueRMSQuick reference guide conversion tableOld model New model Feature changesFluke 337 Fluke 376 Includes all 337 features plus:• CAT IV 600 V, CAT III 1000 V• iFlex 2500 A ac• 1000 V ac/dc• mV dcFluke 336 Fluke 375 Includes all 336 features plus:• CAT IV 600 V, CAT III 1000 V • mV dc• Optional iFlex 2500 A ac • 60 kΩFluke 374 Includes all 336 features (except low pass filter) plus:• CAT IV 600 V, CAT III 1000 V • 1000 µF• Optional iFlex 2500 A acFluke 335 Fluke 374 Includes all 335 features plus:• CAT IV 600 V, CAT III 1000 V• Optional iFlex 2500 A acFluke 373Ordering information• 600 A ac/dc• 1000 µFIncludes all 335 features (except inrush) plus:• CAT IV 300 V, CAT III 600 V • 1000 µFFluke 334 Fluke 374 Includes all 334 features plus:• CAT IV 600 V, CAT III 1000 V• Optional iFlex 2500 A acFluke 373Fluke 333 Fluke 373 Includes all 333 features plus:• CAT IV 300 V, CAT III 600 V• True-rms• True-rms• 600 A ac/dc• 60 kΩ• 1000 µF• 1000 µF• Min/Max/Avg• Min/Max/Avg• Min/Max/Avg• 1000 µF• Min/Max/AvgIncludes all 334 features (except inrush) plus:• CAT IV 300 V, CAT III 600 V • True-rms • 1000 µF• 600 A ac• 6000 Ω• 1000 µFUnprecedentedmeasurement flexibility.The new iFlex flexible current probeexpands the measurement range ofselect Fluke clamp meters to 2500 Aac while providing increased displayflexibility, improved wire access andthe ability to measure awkward-sizedconductors.Available in 18-inch and 10-inchcoil sizes. Visit www.fluke.com/iFlex-18 for additional specs.Recommended accessoriesTL223TL71SureGrip ElectricalPremiumTest Lead SetTest Lead SetSee page 57 See page 57i2500-10 i2500 1810 inch iFlex Flexible 18 inch iFlex FlexibleCurrent ProbeCurrent ProbeSee page 5 See page 5Included accessories18-inch iFlex flexible currentprobe, test leads, soft carryingcase, instruction card, safetyinformation sheet, two AAalkaline batteries.Test leads, soft carryingcase, instruction card, safetyinformation sheet, two AAalkaline batteries.Test leads, soft carryingcase, instruction card, safetyinformation sheet, two AAalkaline batteries.Test leads, soft carryingcase, instruction card, safetyinformation sheet, two AAalkaline batteries.ModelsFLUKE-376FLUKE-375FLUKE-374FLUKE-373True-rms AC/DC Clamp Meter with iFlexTrue-rms AC/DC Clamp MeterTrue-rms AC/DC Clamp MeterTrue-rms AC Clamp MeterAC285TL175SureGrip AlligatorTwistGuardClipsTest LeadsSee page 57 See page 57Check price and availability atwww.fluke.com/wtb-clampsFor more information, go to www.fluke.com/clampsClamp Meters5

Fluke 320 SeriesClamp MetersFluke 322 Fluke 321Get more doneThe Fluke 321 and 322 are designedto verify the presence of load current,ac voltage and continuity of circuits,switches, fuses and contacts. Thesesmall and rugged clamp meters are ideallysuited for current measurements upto 400 A in tight cable environments.• Precised measurements with 1.8 %basic accuracy• Resolution up to 0.01 A and 0.1 V• Measures ac current 40.00 A/400.0 A• Measures ac and dc volts to 600 V• Resistance measurement to 400 Ω• Continuity for quick checking of shortsSee specifications chart on page 7 fordetails per model.Fluke 902 True-rms HVACClamp MeterApplication noteDMM vs. Clamp MeterWhat you know about digitalmultimetersand clampmeters canmake a bigdifference toyour bottomline. Howwell youequip yourselfto doyour workplays a bigrole in yoursuccess.When itcomes to electrical test equipment, areyou sure you have the right tools forthe job? Determine the answer to thatquestion by assessing your measuringneeds, and learning a few thingsabout DMMs and clamp meters—readthe DMM vs. Clamp Meter applicationnote today.Download this application note atwww.fluke.com/DMMvsClampJust for our HVAC prosHVAC (heating, ventilation, air conditioning) techniciansrequire a service tool that can consistently keep up withtheir demands. The Fluke 902 expands the existing line ofquality Fluke clamp meters by delivering the features necessaryto diagnose and repair HVAC systems. Combined withtrue-rms technology and a CAT III 600 V rating, the Fluke902 helps technicians do their jobs safely and accurately.• Designed for HVAC applications with capacitance, dccurrent (µA), and temperature measurements• Small body and jaws fit perfectly in your hand and intotight places• Handy “Display Hold” button keeps measurements on thedisplay• Meter controls are positioned so current measurements canbe done with one hand (index finger on clamp openinglever and thumb on rotary switch)• Three-year warrantyRecommended accessoriesTL223TL71SureGrip ElectricalPremiumTest Lead SetTest Lead SetSee page 53 See page 54LVD2H3Volt LightClamp Meter HolsterSee page 56 See page 62See specifications chart on page 7.TrueRMSOrdering informationIncluded accessoriesTest leads, soft carrying case, instruction card, safetyinformation sheet, two AA alkaline batteries.Test leads, temperature probe, soft carrying case, usersmanual, two AA alkaline batteries.Soft carrying case, instruction card, safety informationsheet, five AA alkaline batteries.1.5 m silicone rubber test leads, test probes, alligatorclips, soft carrying case, six AA batteries, users manual.ModelsFLUKE-321FLUKE-322FLUKE-902Clamp MeterClamp MeterTrue-rms HVAC Clamp MeterFLUKE-353 AC/DC True-rms Clamp Meter, 2000 A,amps onlyFLUKE-355 AC/DC True-rms Clamp Meter, 2000 ACheck price and availability atwww.fluke.com/wtb6Clamp MetersFor more information, go to www.fluke.com/clamps

Fluke 353/355 AC/DC True-rmsClamp Meters, 2000 AVersatile, professional, accurateConfidently take reliable readings with the true-rms Fluke355 and 353 clamp meters—the tools of choice for high currentclamp-on amp meter measurement up to 2000 A.• Reliably handle a wide range of high-current applicationswith 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc• Large 58 mm (2.3 in) jaw• In-rush current measurement• High voltage measurement of 1000 V ac + dc true-rms,600 V ac, and 1000 V dc (355 only)• Resistance to 400 KΩ (355 only)• Continuity beeper (355 only)• Frequency measurement to 1 KHz• Selectable low pass filter mode• Min/Max/Avg• Large display with backlightOrdering information on page 6.TrueRMSApplication noteClamp Meter ABCsWhat is aclamp meterand whatcan it do?What measurementscan be madewith a clampmeter? Howdo you getthe most outof a clampmeter?Which clampmeter is best suited to the environmentthe meter will be used in? The answersto these questions can be found in thisapplication note.Download this application note atwww.fluke.com/ClampABCsSpecifications – Clamp metersResidential/commercialelectricalGeneral purpose Industrial electrical HVAC/RHigh end industrial,utility321 322 365 373 374 375 376 381 902 353 355iFlexaccessoryi2500-10/i2500-18Leakage360AC current • • • • • • • • • • • • •AC voltage • • • • • • • • • •Resistance • • • • • • • • • •Continuity • • • • • • • • • •DC volts • • • • • • • • •DC current • • • • • • • •True-rms • • • • • • • • • •Frequency • • • • • •AC + DC voltageAC + DC current • •Min/Max/Avg • • • • • • • •TemperatureCapacitance • • • • • •Special featuresInrush current mode • • • • • • •Low pass filter • • • • •18-inch iFlex FlexibleCurrent Probe10-inch iFlex FlexibleCurrent ProbeRemote displayOptional Optional Included IncludedOptional Optional Optional OptionalFlashlight/torch • •DisplayDisplay hold • • • • • • • • • • • •Backlight • • • • • • • • •SpecificationsJaw opening 1 in 0.7 in 1.3 in 1.3 in 1.2 in 2.3 in 5.7 in/3.2 in 1.5 inMax wire size500 MCM17 mm(0.67 in)750 MCM••750 MCM orthree 500 MCMCurrent range ac rms 0 to 400.0 A 0 to 200.0 A 0 to 600.0 A 0 to 999.9 A 0 to 600.0 A 0 to 1400 A 0 to 2500 A 0 to 60 AAccuracy ac current(50/60 Hz)1.8 % ± 5 counts 2 % ± 5 counts 1.5 % ± 5 counts•3 %± 5 counts1250 MCM1 %± 5 countsAC Response Averaging True-rms True-rms True-rms True-rms True-rms True-rms True-rms True-rms True-rms True-rms AveragingCurrent range dc 0 to 200 A 0 to 600.0 A 0 to 999.9 A 0 to 200 µA 0 to 2000 AAccuracy dc current 2 %± 5 counts2 % ± 5 counts1 %± 5 counts1.5 % ± 5 countsVoltage range ac 0 to 600.0 V 0 to 1000 V 600.0 V 0 to 600.0 VAccuracy ac voltage1.2 % ± 5 counts2 % ± 5counts1 % ± 5counts1.5 % ± 5 countsVoltage range dc 0 to 600.0 V 0 to 1000 V 0 to 600.0 V 0 to 1000 VAccuracy dc voltage 1 % ± 5counts2 % ± 5counts1 % ± 5 countsResistance range 0 to 400 0 to 6000 0 to 60 k 0 to 9999 0 to 400 KFrequencymeasurement range1 % ± 5counts1 % ± 5counts1 % ± 5counts500 Hz 5 to 1000 Hz 500 HzFor more information, go to www.fluke.com/clampsClamp Meters7

Pick the right digital multimeter for youDigital multimeter selection guideModelsHighestaccuracy289Industrialtroubleshooting87VBuilt-inthermometer179Buildingmaintenance117HVAC/Rtechnicians116RemoteDisplay233InsulationMultimeter1587IP 67Industrial28 IIBest forData loggingVariable speeddrives Every day useWide variety ofelectrical workHVACtroubleshootingPerform two-manjobs aloneTroubleshootingand preventivemaintenanceHarshenvironmentsBasic featuresTrue-rms readings AC+DC AC AC AC AC AC AC ACBasic dc accuracy 0.025 % 0.05 % 0.09 % 0.5 % 0.5 % 0.25 % 0.09 % 0.05 %Wide bandwidth 100 kHz 20 kHz 20 kHzAuto/manual ranging • • • • • • • •Digits 4-1⁄2 4-1⁄2 3-1⁄2 3-1⁄2 3-1⁄2 3-1⁄2 4-1⁄2Counts 50000 20000 6000 6000 6000 6000 6000 20000MeasurementsVoltage ac/dc 1000 V 1000 V 1000 V 600 V 600 V 1000 V 1000 V 1000 VCurrent ac/dc 10 A 10 A 10 A 10 A 600 µA 10 A 400 mA 10 AResistance 500 M 50 M 50 M 40 M 40 M 40 M 50 M 50 MFrequency 1 MHz 200 kHz 100 kHz 50 kHz 50 kHz 50 kHz 100 kHz 200 kHzCapacitance 100 mF 10 mF 10 mF 10 mF 10 mF 10 mF 10 mF 10 mFTemperature +1350 °C +1090 °C +400 °C +400 °C +400 °C +500 °C +1090 °CdB60 dBConductance 50 nS 60 nS 60 nSDuty cycle/pulse width • •⁄– •⁄–Motor drive measurements/lowpass filter• • • •Continuity with beeper/diode test• • • • • • • •Low ohms (50 )•DisplayDual display•Analog bargraph • • • • • •Backlight • • • • • • • •Remote display•Data storage and exchangeMin/Max recording Time stamp • • • • • • •Fast Min/Max 250 µs 250 µs 250 µsDisplay Hold/Auto (Touch)Hold• • • • • • •Relative reference • • •PC interface•Data logging•Readings memories 10,000Other featuresAutomatic selection, LoZ • • •Insulation test range0.01 M to 2 GNon-contact ac voltagedetector•Real-time clock•Overmolded case, integratedholster• • •Removable holster • • • • •ToolPak compatibility • • • • • • •Closed case calibration/separate battery door• • • • • • • •Completely sealed/watertight•Automatic power off • • • • • • • •Low battery indication • • • • • • • •Operating temperatureranges–20 °C, +55 °C –20 °C, +55 °C –10 °C, +50 °C –10 °C, +50 °C –10 °C, +50 °C –10 °C, +50 °C –40 °C, +55 °CIP rating IP 42 IP 30 IP 42 IP 42 IP 30 IP 67Warranty and electrical safetyWarranty Limited lifetime Limited lifetime Limited lifetime Three-years Three-years Three-years Three-years Limited lifetimeInput alert • • •Dangerous voltageindication• • • • • • • •CAT III measurements 1000 V 1000 V 1000 V 600 V 600 V 1000 V 1000 V 1000 VCAT IV measurements 600 V 600 V 600 V 600 V 600 V 600 VSee page 11 12 13 14 15 9 17 108Digital MultimetersFor more information, go to www.fluke.com/dmm

Fluke 233 Remote DisplayDigital MultimeterTrueRMSFeaturesMade inthe U.S.A.of U.S. andnon U.S.partsFeaturesMeasure up to 1000 V ac and dcMeasure up to 10 A (20 A for 30 seconds)10,000 μF capacitance rangeFrequency to 50 kHzResistance, continuity and diode testMin/Max and average recording to capture variations automaticallyThree-year warrantyThe Fluke 233 Remote Display Digital Multimeter allowsyou to be in two places at once. The removable displaysolves several problems. First, you no longer have to holdboth the meter and the test leads to make a measurement.Second, making measurements in hard-to-reachplaces is much easier, and third, it allows you to takemeasurements in machines or panels that are physicallyseparated from a limit switch or an isolator switch. TheFluke 233 is also designed to work in areas where theoperator can’t be close to the active measurement point,like clean rooms or hazardous areas.• Wireless technology allows the display to be carriedup to 30 feet away from the point of measurement foradded flexibility• The removable magnetic display can be convenientlymounted where it is easily seen• Low-power 802.15.4 wireless technology does notinterfere with measurement accuracy• Use as a conventional multimeter when the display isconnected• True-rms ac voltage and current• Built-in thermometer• Auto power off maximizes battery life (400 hours)• Radio transmitter automatically turns off when thedisplay is connected to the meter• Record signal fluctuations using the Min/Max functionRecommended Product video accessoriesView this product demonstrationto learn more about the Fluke 233.www.fluke.com/233videoApplication noteThe new Fluke 233 wirelessdigital multimeterWhat if, asan electricalprofessional,you couldtake a clamponammeterreading usingRecommended your digital kitsmultimeter(DMM) withthe disconnectdoor orMCC cubicledoor closed?Download this application note atwww.fluke.com/233dmmRecommended accessoriesSpecificationsFunctionsSpecificationsDC voltage Range 0.1 mV to 1000 VAccuracy 0.25 % + 2AC voltage Range 0.1 mV to 1000 VAccuracy 1.0 % + 3DC current Range 0.1 mA to 10 AAccuracy 1.0 % + 3AC current Range 0.1 mA to 10 AAccuracy 1.5 % + 3Resistance Range 0.1 Ω to 40 MΩCapacitance 1000 nF to 9999 µFFrequency0.1 Hz to 50.00 kHzTemperature-40 °C to +400 °C (-40 °F to 752 °F)PowerThree AA batteries main body, two AA batteries display moduleBattery life400 hoursComplianceCAT IV 600 V , CAT III 1000 VSize (HxWxL)5.3 cm x 5.3 cm x 19.3 cm (2.08 in x 2.08 in x 7.6 in)Weight604 g (1.3 Ib)Ordering informationTPAKTL220MagneticSureGrip IndustrialMeter HangerTest Lead SetSee page 62 See page 5380PK-9i400sGeneral Purpose Probe AC Current ClampSee page 58 See page 6080AK-AC35Thermocouple Adapter Soft Carrying CaseSee page 59 See page 54Included accessoriesTest leads, temperature probe,alligator clips, batteries, usersmanual.ModelsFLUKE-233Remote Display MultimeterCheck price and availability atwww.fluke.com/wtbDigital Multimeters9

Fluke 27 II/28 II IndustrialDigital MultimetersTrueRMSFeaturesMade inthe U.S.A.of U.S. andnon U.S.partsThe 27 II and 28 II Digital Multimeters are designedfor tough work environments. Both meters haveIP 67 waterproof and dustproof rating. They bothhave an extended operating temperature rangeof -15 °C to + 55 °C (5 °F to 131 °F) and 95 %humidity.• Unique function for accurate voltage andfrequency measurements on adjustable speedmotor drives and other electrically noisy equipment(28 II)• Built-in thermometer conveniently allows youto take temperature readings without having tocarry a separate instrument (28 II)• Hi-resolution 20,000 count display mode (28 II)• Resistance and continuity. Relative mode toremove test lead resistance from low ohmsmeasurements• Large digit display with bright, two-levelbacklight• Backlit keypad buttons allow for easy visibilityin low-lit areas• Optional magnetic hanger for easy setup andviewing freeing your hands for other tasks• U.S. Mine Safety and Health Administration(MSHA) approvedFeaturesTested to withstand a 3 m (10 ft) dropWide 1000 V measurement rangeTrue-rms ac voltage and current for accurate measurements on non-linear signals (28 II)Average responding voltage and current measurements (27 II)10 A continuous (20 A for 30 seconds)Frequency and capacitanceRecord signal fluctuations using the Min/Max functionUnited States Department of LaborMSHAMine Safety and Health AdministrationProduct videoHow dirty does your DMM get?Watch the video below to see more.www.fluke.com/dirtydmmApplication noteTough places, tough toolsOut on thejob site,concretefinishersstand readyto shape wetready-mixinto a newstretch ofhighway.Mixer trucksare lined upat the concretebatchplant, waitingto take on their loads. But hold on—anelectrical problem has shut down theplant. It’s time to call Keithly Electric.Download this application note atwww.fluke.com/toughdmmsRecommended accessoriesSpecificationsSpecification 27 II 28 IIDC voltage Range 0.1 mV to 1000 VAccuracy 0.05 % +1 0.05 % + 1AC voltage Range 0.1 mV to 1000 VAccuracy 0.5 % +3 0.7 % +4DC current Range 0.1 µA to 10 AAccuracy 0.2 % + 4 0.2 % + 4AC current Range 0.1 µA to 10 AAccuracy 1.5 % + 2 1.0 % + 2Resistance Range 0.1 Ω to 50 MΩDisplay counts 6000 6000 / 19,999Capacitance 1 nF to 9999 µFFrequency0.5 Hz to 199.99 kHzTemperature -200 °C to +1090 °CLow pass filter (measurement on VSD’s)YesComplianceCAT IV 600 V , CAT III 1000 VMeasurement method Avg. responding True-rmsPowerThree AA batteriesBattery life800 hoursDimensions (DxWxH)2.5 in x 3.93 in x 7.8 inWeight with holster698.5 g (1.54 lb)Ordering informationTPAKTLK-225MagneticSureGrip MasterMeter HangerAccessory SetSee page 62 See page 55PV350i410Pressure-Vacuum Module AC/DC Current ClampSee page 63 See page 60CXT80C550Extreme Hard CaseTool BagSee page 54 See page 54Included accessoriesTest leads, temperature probe,alligator clips, batteries, holster,users manual.ModelsFLUKE-27-IIFLUKE-28-IIIndustrial MultimeterIndustrial MultimeterCheck price and availability atwww.fluke.com/wtb10Digital MultimetersFor more information, go to www.fluke.com/dmm

Fluke 289 and 287 True-rmsLogging MultimetersFind little problems before they become big ones.The Fluke 289 and 287 are the next generation in highperformance industrial logging multimeters.• Large 50,000 count,1/4 VGA dot matrixdisplay with whitebacklight• Logging functionwith expanded memorfor unattended monitoTrendCapture displays V dc logged data.of signals over time. Usingon-board TrendCapture,users can graphically review logged readings withoutneeding a PC. Store up to 10,000 recorded events• Save, name, and recall multiple logging sessionsbefore PC download is necessary• Zoom on trend, provides unprecedented ability toview and analyze TrendCapture data; zoom in up to14 times• Two terminal 50 ohm range with 1 milliohm resolution,10 mA source current. Useful for measuring andcomparing differences in motor winding resistance orcontact resistance (289)• Low pass filter for accurate voltage and frequencymeasurements on adjustable speed motor drives andother electrically noisy equipment (289)• LoZ volts. Low impedance voltage function foreliminating ghost voltages. Also recommended whentesting for absence or presence of live power (289)Recommended accessoriesTLK289TLK287IndustrialElectronicTest Lead SetTest Lead SetSee page 55 See page 55TPAKi410Magnetic Meter Hanger AC/DC Current ClampSee page 62 See page 61FVF-SC2C280FlukeView FormsSoft CaseSee page 63 See page 54TrueRMSMade inthe U.S.A.of U.S. andnon U.S.partsRecommended kitsFeaturesFeaturesMultiple on screen displaysYesTrue-rms ac bandwidth100 kHzdBV/dBmYesDC mV resolution 1 µVMegohm rangeup to 500 MConductance50.00 nSContinuity beeperYesElapse time clock/time of day clockYesMin/Max/Avg/duty cycle/pulse widthYesIsolated optical DMM interface with USB PC connectionYesAuto/touch holdYesOver 200 hours logging capacity with new power saving functionYesWarrantyLimited lifetime289/FVF kit includes:• True-rms industrial logging multimeter withTrendCapture• FlukeView Forms Software and cable• Temperature probe• Silicone test lead set• Alligator clips• Meter hanging accessory• Soft caseSpecificationsFunctions Range and resolution Basic AccuracyAC volts or dc volts 50.000 mV, 500.00 mV, 5.0000 V, 50.000 V,500.00 V, 1000.0 VAC current dc current500.00 µA, 5000.0 µA, 50.000 mA, 400.00 mA,5.0000 A, 10.000 AOrdering informationIncluded accessoriesTest leads, alligator clips,holster, 9 V battery (installed),users manual on CD, gettingstarted guide.ModelsFLUKE-289FLUKE-287FLUKE-289/FVFFLUKE-287/FVFTrue-rms Industrial Logging Multimeter with TrendCaptureTrue-rms Electronics Logging Multimeter with TrendCapture0.025 %0.4 % (true-rms) (AC)0.15 %0.7 % (true-rms)Temperature (excluding probe) -200.0 °C to 1350.0 °C (-328.0 °F to 2462.0 °F) 1.0 %Resistance50.000 , 500.00 , 5.0000 k, 50.000 k, 500.00 k, 5.0000 M, 0.05 %50.00 M, 500.0 MCapacitance1.000 nF,10.00 nF, 100.0 nF, 1.000 µF, 10.00 µF, 100.0 µF, 1000 µF,1.0 %10.00 mF, 100 mFFrequency 99.999 Hz, 999.99 Hz, 9.9999 kHz, 99.999 kHz, 999.99 kHz .005 %True-rms Industrial Logging Multimeter Combo Kit with TrendCaptureTrue-rms Electronics Logging Multimeter Combo Kit with TrendCapture287/FVF kit includes:• True-rms electronic logging multimeter withTrendCapture• FlukeView Forms Software and cable• Temperature probe• Modular test leads (red, black)• Modular test probes (red, black)• Alligator clips (red, black)• Soft caseCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/dmm Digital Multimeters 11

Fluke 87V Industrial MultimeterFor industrial productivityThe Fluke 87V has measurement functions, troubleshootingfeatures, resolution and accuracy to solvemore problems on motor drives, in-plant automation,power distribution and electro-mechanical equipment.• Unique function for accurate voltage and frequencymeasurements on adjustable speed motor drives andelectrically noisy equipment (87V and 87V Ex)• Large digit display with bright two level backlightmakes the 87V significantly easier to read• Measure 20 A for up to 30 sec, 10 A continuously• Optional magnetic hanger for easy setup and viewingwhile freeing your hands for other tasks (TPAK)• Expanded capacitance range to 10,000 µFElectrical safetyAll inputs are protected to CAT III 1000 V and CAT IV600 V. They can withstand impulses in excess of8,000 V to help protect you from arc blast resultingfrom surges and spikes.Specialty modelsFluke 87V ExIntrinsically SafeTrue-rms MultimeterSee page 39 for moreinformation.Recommended accessoriesAvailable in intrinsically safe version as theFluke 87V Ex.Also available as 83V average respondingmultimeter, see below for specifications.TPAKTL220MagneticSureGrip IndustrialMeter HangerTest Lead SetSee page 62 See page 55Made inthe U.S.A.of U.S. andnon U.S.partsTrueRMSFeaturesFeatures 87V Ex 87V 83VPeak capture to record transients as fast as 250 µs • •Measure up to 1000 V ac and dc • • •Auto and manual ranging for maximum flexibility • • •Analog bargraph • • •Frequency to 200 kHz and % duty cycle • • •Min/Max and average recording to capture variations automatically • • •Relative mode to remove test lead resistance from low ohms measurements • • •Access door for fast battery changes without breaking the calibration seal • • •Limited lifetime warranty One-year • •SpecificationsPV350i400Pressure-Vacuum Module AC Current ClampSee page 63 See page 60L210CXT80Probe Extender with Light Extreme CaseSee page 62 See page 54Recommended kitsBasic accuracyFunctionsRange and resolution87V83VDC volts 600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V 0.05 % 0.1 %AC volts 600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V 0.7 % (true-rms) 0.5 %DC current 600.0 µA, 6000 µA, 60.00 µA, 600.O mA, 6.000 A, 10.00 A 0.2 % 0.4 %AC current 600.0 µA, 6000 µA, 60.00 µA, 600.O mA, 6.000 A, 10.00 A 1.0 % (true-rms) 1.2 %Temperature (excl. probe) -200 °C to 1090 °C (-328 °F to 1994 °F) 1.0 %80BK Temperature Probe -40 °C to 260 °C (-40 °F to 500 °F) 2.2 °C or 2 %Resistance 600.0 , 6.000 k, 60.00 k, 600.0 k, 6.000 M, 50.00 M 0.2 % 0.4 %Capacitance 10.00 nF, 100.0 nF, 1.000 µF, 10.00 µF, 100.0 µF, 9,999 µF 1.0 % 1.0 %Frequency 199.99 Hz, 1.9999 kHz, 19.999 kHz, 199.99 kHz 0.005 % 0.005 %Battery life: 400 hours typical with backlight off. Size (LxWxD): 201 mm x 98 mm x 52 mm (7.9 in x 3.8 in x 2 in).Weight: 355 g (22 oz).Ordering informationIncluded accessoriesTest leads, alligator clips, holster, 9 V battery(installed), temperature probe (87V only), usersmanual on CD, operator’s guide.ModelsFLUKE-87-5FLUKE-83-5FLUKE-87V ExFLUKE-87-5/E2Industrial True-rms Multimeter with TemperatureIndustrial MultimeterIntrinsically Safe True-rms MultimeterIndustrial Electrician’s Combo KitFluke 87V/E2 Industrial Electrician’s Combo Kit• Industrial multimeter• Lightweight soft case to provide optimal protectionand storage• 1.5 m silicone leads resist heat• Removable probes with 4 mm of exposed metal foruse on industrial circuits• Retractable long reach alligator clips• Meter hanging accessory• Type K temperature probeCheck price and availability atwww.fluke.com/wtb12Digital MultimetersFor more information, go to www.fluke.com/dmm

Fluke 170 Series Digital MultimetersFor maintenance and field serviceThe Fluke 179 True-rms Multimeter has the featuresneeded to find most electrical and HVAC problems.Simple to use with significant improvements over theoriginal Fluke 70 Series.• Wide 1000 V measurement range• True-rms for precise measurement of non-linearsignals• Capacitance, resistance, continuity and frequency• Built-in thermometer (Fluke 179 only)• Large, easy-to-read display• Backlight for work in dimly lit areas(Fluke 177 and179 only)• Min/Max/Avg to record signal fluctuations• Display hold and auto hold• Manual and automatic rangingElectrical safetyAll inputs are protected to measurement CAT III 1000 Vand CAT IV 600 V. This meter can withstand transientimpulses in excess of 8000 V to help protect you fromarc blasts resulting from surges and spikes.Recommended accessoriesTPAKTL238MagneticTest Lead Set for HighMeter HangerEnergy EnvironmentsSee page 62 See page 57FOMi2000 FlexFiber Optic Meter AC Current ClampSee page 63 See page 60Made inthe U.S.A.of U.S. andnon U.S.partsTrueRMSLVD2C35Volt LightSoft Carrying CaseSee page 62 See page 54Recommended kitsFeaturesFeatures 179 177 175Max voltage 1000 1000 1000True-rms • • •Temperature•Basic dc accuracy 0.09 % 0.09 % 0.15 %Backlight • •Min/Max/Avg • • •ToolPak meter hanging kit with magnet Opt Opt OptLimited lifetime warranty • • •SpecificationsFunctions Range and resolution Best accuracyDC voltage± 0.09 % (Models 177 and 179)600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V± 0.15 % (Model 175)AC voltage1 600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V ± 1.0 % of readingDC current 60.00 mA, 400.0 mA, 6.000 A, 10.00 A 2 ± 1.0 % of readingAC current 2 60.00 mA, 400.0 mA, 6.000 A, 10.00 A 2 ± 1.5 % of readingResistance 600.0 , 6.000 k, 60.00 k, 600.0 k, 6.000 M, 50.00 M ± 0.9 % of readingCapacitance 1000 nF, 10.00 µF, 100.0 µF, 9999 µF ± 1.2 % of readingFrequency 3 99.99 Hz, 999.9 Hz, 9.999 Hz, 99.99 kHz ± 0.1 % of readingTemperature (Model 179) -40 ºC to +400 ºC (-40 ºF to +752 ºF) 1.0 % of reading1 All ac voltage and ac current ranges are specified from 5 % of range to 100 % of range.2 10 A continuous, 20 A for up to 30 seconds.3 Voltage frequency is specified from 2 Hz to 100 kHz. Current frequency is specified from 2 Hz to 30 kHz.Battery life: 200 hours typical for alkaline.Size (HxWxL): 4.3 cm x 9.0 cm x 18.5 cm (1.7 in x 3.5 in x 7.3 in).Ordering informationIncluded accessoriesTest leads, 9 V battery (installed) andmanual. The Fluke 179 comes withan additional temperature probe.ModelsFLUKE-179FLUKE-175FLUKE-177FLUKE-179/1AC-IIFLUKE-179/EDA2Digital MultimeterDigital MultimeterDigital MultimeterElectricians Combo KitElectronics Combo Kit179/EDA2 Electronics Multimeter andDeluxe Accessory Combo Kit• True-rms digital multimeter• Soft case• Electronic test probes• SureGrip silicone test leads• SureGrip heavy duty hook clips• Type K temperature probe• Meter hanging accessory179/1AC-II Electrician’s Multimeter andVoltage Tester Combo Kit• True-rms digital multimeter• Non-contact voltage detector• Soft case• Alligator clips• SureGrip test probes• Silicone test leads, 1.5 m• Type K temperature probe• Meter hanging accessoryCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/dmm Digital Multimeters 13

Fluke 117 and 115True-rms Digital MultimetersThe 117 Digital Multimeter includes integrated noncontactvoltage detection to help get the job done faster.The Fluke 115 Digital Multimeter is the solutionfor a wide variety of electrical and electronic testingapplications.• VoltAlert technology for integrated non-contactvoltage detection (117)• AutoVolt feature for automatic ac/dc voltage selection(117)• LoZ: Low input impedance prevents false readingsdue to “ghost voltage” (117)• Large display and white LED backlight to work inpoorly lit areas more effectively• Compact ergonomic design for one-handed operation• Min/Max/Avg to record signal fluctuations• Compatible with optional magnetic hanger (TPAK) forhands free operation• Current measurement 20 A (30 secondsmomentary; 10 A continuous)• Resistance, continuity, frequencyand capacitanceFluke 117 Fluke 115Specialty modelFluke 113• Basic electrical andutility multimeter• VCHEK LoZ lowimpedance measurementfunction tosimultaneously test forvoltage or continuity• True-rms for accurateac measurements onnon-linear loads• Record signal fluctuations using theMin/Max function• Diode and capacitance measurements• Integral holster with probe holdersfor easy storage• Auto and manual ranging for addeduser functionality• Meets CAT III 600 V and CAT IV 300 Vstandards for a higher level of safetyTrueRMSRecommended accessoriesFeaturesFeatures 117 115 113VoltAlert•AutoVolt/LoZ • LoZAnalog bargraph • • •Large backlit digital display • • •True-rms for accurate measurements on non-linear loads • • •Min/Max recording • • •Display hold • • •3-1⁄2 digits • • •6000 counts • • •CAT III 600 V safety rated • • •Three-year warranty • • •SpecificationsTPAKTL220MagneticSureGrip IndustrialMeter HangerTest Lead SetSee page 62 See page 55LVD2C35Volt LightSoft Carrying CaseSee page 62 See page 54Recommended kitsFunctions 117 115 113 AccuracyVolts ac/dc 600 V 600 V 600 V 0.5 % + 2Current ac/dc 10 A 10 A 1.0 % + 3Resistance 40 M 40 M 60 k 0.9 % + 2Capacitance 1 nF to 9,999 µF 1 nF to 9,999 µF 1.9 % + 2Diode test Yes Yes YesFrequency 5 Hz to 50 kHz 5 Hz to 50 kHz 0.1 % + 2Ordering informationIncluded accessoriesTest leads, holster, usersmanual and 9 V battery(installed).ModelsFLUKE-117FLUKE-115FLUKE-113FLUKE-117/322Multimeter with Non-Contact VoltageMultimeterUtility MeterElectrician’s Combo Kit117/322 Electrician’s Combo Kit• True-rms digital multimeter withnon-contact voltage detection• Compact clamp meter• Test lead set• Magnetic meter hanging strap• Deluxe carrying case with shoulder strapCheck price and availability atwww.fluke.com/wtb14Digital MultimetersFor more information, go to www.fluke.com/dmm

Fluke 116 and 114 Digital MultimetersHVAC/R and electrical troubleshootingThe Fluke 116 Digital Multimeter was specificallydesigned for the HVAC professional.The Fluke 114 Digital Multimeter is the best troubleshootingtool for “go/no-go” testing.• Built in thermometer for HVAC applications (116)• Microamps to test flame sensors (116)• AutoVolt: Automatic ac/dc voltage selection (114)• LoZ: Helps prevent false readings due to ghost voltage• Min/Max/Avg to record signal fluctuations• Resistance, continuity, frequency and capacitance• Large white LED backlight to work in poorly lit areas• Compact ergonomic design for one-handed operation• Compatible with optional magnetic hanger (TPAK)Recommended accessoriesFluke 11680AK-ADMM AdapterSee page 5980PK-24SureGrip AirTemperature ProbeSee page 5880PK-1880BK-APipe ClampIntegratedTemperature Probe Kit Temperature ProbeSee page 58 See page 58Recommended kitsFluke 116Fluke 114TrueRMSFeaturesFeatures 116 114TemperatureMicroampsFrequencyCapacitanceDiode testAutoVolt/LoZ • •Analog bargraph • •Large backlit digital display • •True-rms for accurate measurements on non-linear loads • •Min/Max recording • •Display hold • •3-1⁄2 digits • •6000 counts • •CAT III 600 V safety rated • •Three-year warranty • ••••••116/322 HVAC Combo Kit• HVAC multimeter with temperature and microamps• Compact clamp meter• Test lead set• Pipe wrap thermocouple• Thermocouple adapter• Thermocouple bead probe• Meter hanging accessory• Deluxe carrying case with shoulder strapSpecificationsFunctions Range and resolution Best accuracyVolts ac/dc 600 V 0.5 % + 2Current ac/dc (116 only) 600.0 µA 1.0 % + 2Temperature (116 only) +400 °C 1.0 % + 18Resistance 40 M 0.9 % + 2Capacitance (116 only) 1 nF to 9,999 µF 1.9 % + 2Frequency (116 only) 5 Hz to 50 kHz 0.1 % + 2Ordering information116/62 HVAC Combo Kit• HVAC multimeter with temperature and microamps• Infrared thermometer• Test lead set• Pipe wrap thermocouple• Thermocouple adapter• Type K integrated temperature probe• Magnetic meter hanging strap• Deluxe carrying case with shoulder strapIncluded accessoriesTest leads, integrated temperature probe (116 only),holster, users manual and 9 V battery (installed).ModelsFLUKE-116FLUKE-114FLUKE-116/62FLUKE-116/322HVAC Multimeter with Temperature and MicroampsElectrical MultimeterHVAC Combo KitHVAC Combo KitCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/dmm Digital Multimeters 15

Fluke 88V and 77 IV Digital MultimetersFor automotive, field service or bench repairuke 88V Automotive Multimetere Fluke 88V Automotive Multimeter is designed top automotive professionals solve problems faster.is DMM has the measurement functions, troubleshootgfeatures and accuracy to solve virtually any problemth conventional and hybrid vehicles.Automotive test functions include dc and ac voltage,resistance and currentMin/Max recording for logging the highest and lowestreadings over timeFrequency measurements for magnetic sensors andac/dc frequency signalsDuty cycle for variable duty cycle signals with selectabletrigger, slope and levelPulse width for fuel injector on-time measurementsConductance testing for secondary ignition coilsRPM measurements for DIS and conventional ignitionsystemsBuilt-in thermometerMade inthe U.S.A.of U.S. andnon U.S.partsRecommended accessoriesFluke 88VTP40TP88Automotive BackRigid Back ProbeProbe Pin SetPin SetSee page 56 See page 56TLK281TLK282AutomotiveDeluxe AutomotiveTest Lead KitTest Lead KitSee page 56 See page 56Fluke 77 IVFluke 77 IV Digital MultimeterThe 77 IV Digital Multimeter has the features neededto repair most electrical and electronic problems. Thismeter is simple to use and has significant improvementsover Fluke’s original 70 Series with more measurementfunctions, conformance to the latest safety standards,and a much larger display that’s easier to view.• Wide 1000 V measurement range• Average responding ac measurements• 0.3 % accuracy• 10 amps continuous• Frequency and capacitance• Resistance and continuity• Large display• Backlight for work in dim areas• Min/Max to record signal fluctuations• Integral holster with probe holders• Free your hands with the optional TPAK magnetichanger• Auto and manual rangingTPAKi400Magnetic Meter Hanger AC Current ClampSee page 62 See page 60TL225SureGrip Stray VoltageAdapter Test Lead KitRecommended kitsTLK-225SureGrip MasterAccessory KitSee page 55Made inthe U.S.A.of U.S. andnon U.S.partsSpecifications (77 IV)Functions Range Best accuracy Best resolutionV dc 600.0 mV to 1000 V ± (0.3 % + 1) 0.1 mVV ac 6.000 V to 1000 V ± (2.0 % + 2) 1.0 mVA dc 60.00 mA to 10 A ± (1.5 % + 2) 0.01mAA ac 60.00 mA to 10 A ± (2.5 % + 2) 0.01 mAResistance 600.0 Ω to 50 MΩ ± (0.5 % + 1) 0.1 ΩCapacitance 1 nF to 9,999 µF ± (1.2 % + 2) 1 nFFrequency 99.99 Hz to 99.99 kHz ± (0.1 % + 1) 0.01 HzOrdering information• Automotive multimeter• Heat resistant silicone test leads• Removable sharp point test probes• Large jaw alligator clips• Temperature probe• Inductive pick-up• Automotive backprobe pins• Insulation piercing probe• Meter hanging accessory• Durable carrying caseIncluded accessoriesTest leads, carrying case (88V only), usersmanual and 9 V battery (installed).ModelsFLUKE-88-5FLUKE-77-4FLUKE-88-5/A KITAutomotive MultimeterDigital MultimeterAutomotive Multimeter Combo KitCheck price and availability atwww.fluke.com/wtb16Digital MultimetersFor more information, go to www.fluke.com/dmm

Fluke 1587 and 1577Insulation MultimetersFluke 1587Two powerful tools in oneThe Fluke 1587 and 1577 Insulation Multimeters combinea digital 1 kV insulation tester with a full-featured, truermsdigital multimeter in a single compact, handheld unit,which provides maximum versatility for both troubleshootingand preventive maintenance.• Insulation test (1587: 0.01 MΩ to 2 GΩ) (1577: 0.1 MΩ to600 MΩ)• Insulation test voltages (1587: 50 V, 100 V, 250 V, 500 V,1000 V), (1577: 500 V, 1000 V) for many applications• Live circuit detection prevents insulation test if voltage> 30 V is detected for added user protection• Auto-discharge of capacitive voltage for added userprotection• Filter for motor drive measurements (1587 only)• AC/DC voltage, dc millivolts, ac/dc milliamps, resistance(W), and continuity• Capacitance, diode test, temperature,Min/Max, and frequency (Hz) (1587 only)• Auto power off to save battery power• Large display with backlight and largedigits• Included accessories: Remote probe, testleads and probes, alligator clips, (Type Kthermocouple, 1587 only)• Accepts optional Fluke TPAK magnetichanging system to free your hands forother work• Rugged, utility hard case allows you tobring everything you need for the jobFluke 1577Recommended accessoriesTPAKi400sMagnetic Meter Hanger AC Current ClampSee page 62 See page 60C25Meter CaseSee page 54Recommended kitsTL27Heavy DutyTest LeadsGet more value and productivityEstablishing a preventive maintenance program isbecoming critical to maintaining the uptime of electricalequipment and can significantly reduce both plannedand unplanned downtime. Unplanned downtime costsare difficult to calculate, but are often significant. Forsome industries, it can represent 1 % to 3 % of revenue(potentially 30 % to 40 % of profits) annually.These kits can help you be proactive and efficient withyour maintenance and can save you up to 10 % off theindividual price of the tools.TrueRMSSpecificationsFeatures 1587 1577 1507 1503Insulation test voltages 50 V, 100 V,250 V, 500 V, 1000 V• •Insulation test voltages 500 V, 1000 V • •Insulation resistance 0.01 M to 2.0 G 0.1 M to 600 M 0.01 M to 10 G 0.1 M to 2 GAuto-discharge of capacitive voltage • • • •Insulation test smoothing readingFrequencyCapacitanceDiode testTemperatureMin/MaxLow-pass filter (for work on VSDs)Ordering information•••••••AC/DC Voltage • •DC millivolts • •AC/DC milliamps • •Resistance 0.1 to 50 M 0.1 to 50 M 0.1 to 20.00 K 0.1 to 20.00 KContinuity • •Warranty Three-year Three-year One-year One-yearRemote probe, test leads, alligator clips • • • •Type K thermocouple•Rugged, utility hard case • • • •Auto power off • • • •Page number 17 17 24 24Fluke 1587/ET Advanced ElectricalTroubleshooting Kit includes:• Fluke 1587 Insulation Multimeter• Fluke i400 Current Clamp• Fluke 62 Mini Infrared ThermometerFluke 1587/MDT Advanced Motor and DriveTroubleshooting Kit includes:• Fluke 1587 Insulation Multimeter• Fluke i400 Current Clamp• Fluke 9040 Phase Rotation IndicatorIncluded accessoriesRemote probe, test leads,alligator clips, Type Kthermocouple (1587 only), hardcase and users manual.ModelsFLUKE-1577FLUKE-1587FLUKE-1587/ETFLUKE-1587/MDTInsulation MultimeterInsulation MultimeterAdvanced Electrical Troubleshooting KitAdvanced Motor and Drive Troubleshooting KitCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/dmm Digital Multimeters 17

Fluke 421D, 416D and 411DLaser Distance MetersThe Fluke laser distance meters offer the most advanced measuringtechnology available. Unlike ultrasonic distance meterswith laser pointers, these meters use a precision narrow laserbeam that helps avoid the common errors caused by extraneousobjects near measurement targets.• Eliminate estimation errors, saving both time and money• Instant measurement with one-button operation• Easy targeting with bright laser• Quick calculation of area (square footage) and volume• Easy addition and subtraction of measurements• Two-year warrantyApplication tipWays laser distance meterssave time and money1. Fast measurements: Point. Click.The measurement is done.2. Easy access: High ceiling?Obstacles in the way? Just aimthe laser.3. One man operation: Your helpercan do other jobs.4. Longer distances: Up to 100meters (330 feet).5. Calculations: Add and subtractdistances. Find area and volume.Even calculate height usingPythagorean math.See why Chip Wade and otherexperts use distance meters.www.fluke.com/ldm-videoFluke 416DFluke 411DSpecificationsFeatures Fluke 421D Fluke 416D Fluke 411DRange (for extended distances, usea target plate)*Operating altitude (ISO 9022) up to 3500 m up to 3500 m up to 3500 mStorage humidity (at 35 °C) maximum 85 % for 24 h maximum 85 % for 24 h maximum 85 % for 24 hBatteries AAA (2) AAA (2) AAA (2)* In favorable conditions (optimal target surface, room temperature) up to 10 m (33 ft). In unfavorable conditions, such asintensive sunshine, very weakly reflecting target surface, or large temperature fluctuations, measuring accuracy maydeteriorate to approx. ± 0.25 mm/m (± 0.003 in/ft) for distances above 10 m (33 ft).** In favorable conditions (optimal target surface, room temperature) up to 10 m (33 ft). In unfavorable conditions, such asintensive sunshine, very weakly reflecting target surface, or large temperature fluctuations, the deviation over distances10 m (33 ft) can increase by approx. ± 0.15 mm/m (± 0.0018 in/ft).Ordering informationIncluded accessoriesTwo AAA batteries, users manual on CD,quick start guide, nylon carrying case.Three self-retaining test probes (black),alligator clip, users manual.0.05 m to 100 m(0.16 ft to 330 ft)ModelsFLUKE-421DFLUKE-416DFLUKE-411DFLUKE-411D/62FLUKE-90400.05 m to 60 m(0.16 ft to 200 ft)0.1 m to 30 m(0.33 ft to 100 ft)Measuring accuracy** ± 1.5 mm (± 0.059 in) ± 1.5 mm (± 0.059 in) ± 3 mm (0.118 in)Laser class II II IILaser type 635 nm, < 1 mW 635 nm, < 1 mW 635 nm, < 1 mWAutomatic power off After 180 seconds after 180 seconds after 180 secondsContinuous measurement • • •Addition/subtraction • • •Battery life up to 5,000 measurements up to 3,000 measurements up to 3,000 measurementsLCD illumination • • —Data locations 20 10 —Min/Max • • —Audible feedback • • —Pythagoras (Indirect measurement) Full Full SimpleRoom angle and stakeout • — —±45 ° Tilt sensor/indirect measure • — —Ingress protection IP54 IP54 IP40Dimensions127 mm x 52 mm x 29 mm(5.00 in x 2.06 in x 1.13 in)135 mm x 46 mm x 31 mm(5.31 in x 1.81 in x 1.22 in)123 mm x 50 mm x 26 mm(4.84 in x 1.97 in x 1.02 in)Weight 125 g (4.40 oz) 110 g (3.88 oz) 150 g (5.29 oz)Temperature rangeStorageOperation-25 °C to 70 °C(-13 °F to 158 °F)0 °C to 40 °C(32 °F to 104 °F)-25 °C to 70 °C(-13 °F to 158 °F)0 °C to 40 °C(32 °F to 104 °F)-25 °C to 70 °C(-13 °F to 158 °F)0 °C to 40 °C(32 °F to 104 °F)Laser Distance MeterLaser Distance MeterLaser Distance Meter411D Laser Distance Meter and 62 IR Thermometer KitRotary Field IndicatorRecommended kits• Fluke 62 Mini Thermometer• Soft pouch for each modelOther productsFluke 9040 RotaryField IndicatorThe Fluke 9040 isa premium phaserotation testerwith a CAT III,600 V rating.The frequencyrange is from15 Hz to 400 Hzfor demanding applications. The clearliquid crystal display and the holstermake it suitable for rough outdoorapplications. This instrument issupplied with three unique, expandabletest probes that fit most sockets.Includes a two-year warranty.For more information, go towww.fluke.com/9040Check price and availability atwww.fluke.com/wtb18Laser Distance MetersFor more information, go to www.fluke.com/distance

Fluke 1625 and 1623Geo Earth Ground TestersFluke 1625Fluke 1623The Fluke 1625 and 1623 Earth GroundTesters not only measure ground resistanceusing the classic “fall of potentialtest,” but also enable time saving testingusing “selective” and “stakeless” methods.“Selective” testing does not require theelectrode under test to be disconnectedduring the measurement, thus increasingsafety. The simple “stakeless” methodquickly checks ground connections usingtwo current transformers (probes) clampedaround the ground conductor under test.Offering “one-button” simplicity, the 1623is an all-in-one earth ground tester, whilethe 1625 has extra versatility for moredemanding applications.The 1623 is perfect for performing predictivemaintenance checks of commercialand industrial applications. The 1625 isintended for electrical utility or other electricallynoisy environments.Earth ground resistance and soilresistivity should be measured when:• Designing earth ground systems• Installing new ground system and electricalequipment• Periodically testing ground and lightningprotection systems• Installing large electrical equipmentsuch as transformers, switchgears,machines, etc.Recommended accessoriesEI-1623EI-1625Selective/stakeless Selective/stakelessclamp set for 1623 clamp set for 1625ES-162P3Stake/reel set for3-pole measurementsEI-162BNSplit Core Transformerfor use with Fluke 1625Recommended kitsES-162P4Stake/reel set for4-pole measurementsSpecificationsFeatures 1625 1623 1621One-button measurement concept • •3-pole earth ground measurement • • •4-pole earth ground measurement • •4-pole soil resistivity testing • •2-pole resistance measurement ac • • •2-and 4-pole resistance measurement dc•Selective testing, no disconnection of ground conductor (1 clamp) • •Stakeless testing, quick ground loop testing (2 clamps) • •Measuring frequency 128 Hz • •Earth impedance measurement at 55 Hz•Automatic frequency control (AFC), 94 Hz to 128 Hz•Measuring voltage switchable 20 V/48 V•Programmable limits, settings • •Continuity with buzzer•Dust/water resistance IP 56 IP 56 IP 40Safety rating CAT II 300 V CAT II 300 V CAT II 600 VTwo-year warranty • • •Fluke 1625 Kit• Fluke 1625 tester• 2 test leads• 4 earth ground stakes• 3 cable reels with wire (2-25 m, 1-50 m)• 2 clamps (one inducing, one sensing)• Rugged carrying case* In favorable conditions (optimal target surface, room temperature) up to 10 m (33 ft). In unfavorable conditions, such asintensive sunshine, very weakly reflecting target surface, or large temperature fluctuations, measuring accuracy maydeteriorate to approx. ± 0.25 mm/m (± 0.003 in/ft) for distances above 10 m (33 ft).** In favorable conditions (optimal target surface, room temperature) up to 10 m (33 ft). In unfavorable conditions, such asintensive sunshine, very weakly reflecting target surface, or large temperature fluctuations, the deviation over distances10 m (33 ft) can increase by approx. ± 0.15 mm/m (± 0.0018 in/ft).Ordering informationIncluded accessoriesTest leads, alligator clips, usersmanual.Test leads, alligator clips,stake/reel set 4-pole, selective/stakeless clamp set, ruggedcarrying case, users manual.ModelsFLUKE-1625FLUKE-1623FLUKE-1625 KITFLUKE-1623 KITAdvanced GEO Earth Ground TesterBasic GEO Earth Ground TesterAdvanced GEO Earth Ground Tester KitBasic GEO Earth Ground Tester KitThese products are for unpowered installations measuring grounding connections.Fluke 1623 Kit• Fluke 1623 tester• 2 test leads• 4 earth ground stakes (2-25 m)• 3 cable reels with wire (2-25 m, 1-50 m)• 2 clamps (one inducing, one sensing)• Rugged carrying caseCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/egtEarth Ground Testers19

Fluke 1621 Basic Earth Ground TesterEarth ground tester for resistance measurementThe Fluke 1621 Earth Ground Tester is a rugged, easy-tousetester for three-pole ground resistance measurementsand two-pole ac resistance measurements.Earth ground resistance is measured by installingearth ground test electrodes, and testing with theFluke 1621. Earth ground resistance measurements areused to ensure safe operation and reduce power qualityproblems. With a simple user interface and intuitivefunctionality, the large, clear LCD display provides highvisibility results in daylight or poor lighting conditions.The 1621 is lightweight making it ideal to test forlightning protection levels and periodic check-ups duringroutine maintenance.• Three-pole earth resistance measurements• Two-pole ac resistance measurements• AC/DC voltage measurement• Large dual backlit display• Limit settings for automatic measurement evaluation• CAT II 600 V• Two-year warrantyFeature comparison on page 19.Fluke 1630 Earth GroundClamp MeterThe Fluke 1630 Earth Ground Clamp Meter is able to measureground loop resistances—using the stakeless testing method.This test technique eliminates the dangerous, and time consumingactivity, of disconnecting parallel grounds, as well asthe process of finding suitable locations for auxiliary groundstakes. You can also perform earth ground tests in places youhave not considered before: inside buildings, on power pylonsor anywhere you don’t have access to soil.With the stakeless testing method, the Fluke 1630 EarthGround Clamp Meter is placed around the earth ground rod orthe connecting cable. No earth ground stakes are used at all.A known voltage is induced by one half of the clamp and thecurrent is measured by the other half. The tester automaticallydetermines the ground loop resistance at this groundingconnection. Gone are the days of spending time placing andconnecting stakes for each earth ground rod on your system—amajor time saver.• Quick and easy use—no earth ground stakes are necessary• Large, 35 mm (1.35 in) jaw opening• Measures ground resistance from 0.025 Ω to 1500 Ω• Measures ground leakage current from 0.2 mA to 30 A• High and low alarming• Automatic self calibration• Rugged carrying case and resistance check loop included• Two-year warrantyApplication tipWhat is grounding, andwhat does it do?The NEC, National Electrical Code,defines a ground as a “conductingconnection, whether intentional oraccidental between an electrical circuitor equipment and the earth, or to someconducting body that serves in place ofthe earth.”Earth grounding is an intentionalconnection from a circuit conductor,usually the neutral, to a ground electrodeplaced in the earth. Equipmentgrounding is to ensure that operatingequipment within a structure is properlygrounded.These two grounding systems arerequired to be separate except for aconnection between the two systemsto prevent differences in potential froma possible flashover from a lightningstrike. The purpose of a ground, besidesthe protection of people, plants andequipment, is to provide a safe path forthe dissipation of fault currents, lightningstrikes, static discharges, EMI andRFI signals and interference.Recommended accessoriesCable Reel 50 m Cable Reel 25 mGround/earth wire Ground/earth wire(162.5 ft) (81.25 ft)ES-162P3Stake/reel set for3-pole measurementsRecommended kitsEarth StakeGround/earthstakeOrdering informationIncluded accessoriesTwo measuring leads with alligator clips, 2 m(6 ft), yellow protective holster, 9 V alkalinebattery (LR61), users manual, CD.1-50 m cable reel, 1-25 m cable reel, 3 earthstakes, 2 test leads, 2 alligator clips, carryingcase, yellow protective holster, 9 V alkalinebattery (LR61), users manual, CD.Rugged carrying case with belt, resistancetest loop, 9 V battery, users manual.ModelsFLUKE-1621FLUKE-1621 KITFLUKE-1630These products are for unpowered installations measuring grounding connections.Basic Earth Ground TesterBasic Earth Ground Tester KitEarth Ground Clamp MeterFluke 1621 Tester• 2 cable reels with wire (1-50m, 1-25m)• 3 earth ground stakes• 1 Test lead (red and black 2m)• 2 Alligator Clips• Hard carrying caseCheck price and availability atwww.fluke.com/wtb20Earth Ground TestersFor more information, go to www.fluke.com/egt

Fluke T5, T+PRO, T+ ElectricalTesters and VoltAlert Fluke T5-1000Fluke T+PRO andT+ Electrical Testers• Three forms of ac/dc voltage detection:Light, sound and vibration• Detects live voltage even whenbatteries are dead• Extra heavy-duty, replaceable testleads• Rotary field indicator for troubleshootingthree-phase systems• Continuity beeper, LED flashlightand GFCI tripFluke T5 Voltage, Continuityand Current Testers• Excellent front-line troubleshootingand measurement tool• Available in 600 V and 1000 V models• Digital display• OpenJaw current measurement• Rotary switch selects volts, ampsand ohms functions• Heavy-duty test leadsFluke VoltAlert FamilyThe next generation VoltAlert acnon-contact voltage testers from Flukeare easy to use. Electricians, maintenance,service and safety personnel,and homeowners can quickly test forenergized circuits in the workplace orat home. Certified up to CAT IV 1000 V.Recommended accessoriesH5Electrical Tester HolsterSee page 54T5 KitC520AStarter KitPremium Leather HolsterSee page 55 See page 54Recommended kitsT+PRO-1AC Kit• Fluke T+Pro Electrical Tester• 1AC-II VoltAlertMeter CleanerCleaning WipesSpecificationsFunctions T+PRO T+ T5-1000 T5-600Measure ac/dc voltage Preset 12 V, 24 V, 48 V, 120 V, 208 V,240 V, 277 V (Canada 347 V), 480 V, 600 V1000 V 600 VMeasure ac current (average) 100 A 100 AMeasure continuity Yes Yes < 25 < 25 Measure resistance 9.99 k 1000 1000 DC polarity indicator Yes YesDetachable probe tips withoptional probe tips stylesYes Yes Yes YesDigital display Yes No Yes YesSafety rating CAT IV 600 V/CAT III 1000 VCAT IV 600 V/CAT III 1000 V1000 V OvervoltageCAT III600 V OvervoltageCAT IIIWarranty Two-year Two-year Two-year Two-year*Voltage levels will vary depending on country of intended use.Functions 2AC 1AC-II 1LAC-II LVD2Voltage range 90 V ac to1000 V ac 90 V ac to1000 V ac 20 V ac to 90 V ac 90 V ac to 600 V acAudible alert • • •Flashlight•On/Off Always on • • •Safety rating CAT IV 1000 V CAT IV 1000 V CAT IV 1000 V CAT IV 600 VOrdering information62/T+PRO/1AC-II• Fluke 62 Non-contaThermometer• T+RO Electrical Tes• 1AC-II VoltAlert• Carrying caseT5-1000 Tester Kit• Fluke T5-1000 VoltageElectrical Tester• 2AC VoltAlertVoltage Detector• Fluke H5 HolsterVoltAlert Multi PackIncludes five Fluke VoltAlert voltage detectors.The special kit pricing gets you the fifth VoltAlert free.Included accessoriesThe T+ and T+PRO come with attachedtest probes, lead wrap, users manual.The T5-1000 and T5-600 come withdetachable probes and instruction sheet.ModelsT+PRO and T+PRO CAN Electrical TesterT+ and T+ CAN Electrical TesterT+PRO-1AC KITElectrical Tester and AC Voltage Detector KitT+PRO CAN-1AC KIT Electrical Tester and AC Voltage Detector Kit62-T+PRO-1AC KIT IR Thermometer, Electrical Tester and AC VoltageDetector KitT5-1000 1000 V Voltage, Continuity and Current TesterT5-600 600 V Voltage, Continuity and Current TesterT5-H5-1AC KITVoltage, Continuity and Current Tester Kit2ACVoltAlert Voltage Detector2AC 5PKVoltAlert Voltage Detector 5 Pack1AC-IIVoltAlert Voltage Detector1AC-II 5PKVoltAlert Voltage Detector 5 Pack1LAC-IIVoltAlert Voltage DetectorLVD2Volt LightCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/electricaltestersElectrical Testers21

Fluke 975 AirMeterSimple, one-touch air velocityThe Fluke 975 AirMeter combines five powerful airquality tools into one. Identify and diagnose indoorair quality issues quickly and easily with one rugged,handheld device. The Fluke 975 measures and simultaneouslydisplays temperature, humidity, CO 2 and CO. Atthe press of a button, it quickly measures air flow andpercentage of outside air.• Simultaneously measures, logs and displaystemperature, humidity, CO 2 and CO on a bright,backlit LCD display• % of outside air calculation• One-touch air flow and velocity with availableprobe*• Dew point and wet bulb temperature• CO 2 and CO field calibration feature• Min/Max/Avg on all measured and calculatedreadings• Audible and visual threshold alarms• Extensive discrete or continuous data loggingcapacity, downloadable to PC via USB interface• Includes NIST-traceable certificate of calibration• Automatically compensates for barometric pressurechanges• Two-year warranty*Included with Fluke 975V, optional with Fluke 975.Fluke 922 Airflow Meter/MicromanometerMake airflow measurements easy by combining differential pressure, airflow, and velocity into a single, rugged meter. Used with any pitot tube,the Fluke 922 is the perfect entry point for technicians measuring airflow for the first time, yet powerful enough for advanced users.• Measures differential and static pressure, air velocity and flowreadings• User-defined duct shape and size for maximum airflow accuracy• Bright, backlit display• Min/Max/Avg/Hold functions• Auto power offRecommended accessoriesFluke-975VPAirMeter Velocity Probe for use with Fluke 975 AirMeter.Recommended kitsFluke-975CKAirMeter Calibration Kit includes the gases and toolsnecessary to keep your Fluke 975 AirMeter calibrated.Fluke 975V• AirMeter• Calibration cap• Air velocity probe• FlukeView® Forms software• Power adapter• International power plugs• Hard carrying case• Three AA alkaline batteries• Users manual with safety informationSpecifications975 features Range Display resolution AccuracyTemperature± 0.9 °C/± 1.62 °F from 40 °C to 60 °C ± 0.5 °C/-20 °C to 50 °C0.1 °C (0.1 °F)± 1.00 °F from 5 °C to 40 °C ± 1.1 °C/± 1.98 °F(-5 °F to 122 °F)from -20 °C to 5 °CRelative humidityAir velocity10 % to 90 % RHnon-condensing50.0 fpm to 3000 fpm0.25 m/sec to 15 m/sec1 % ± 2 % RH (10 % RH to 90 % RH)1 fpm (0.005 m/sec)± 4 % or 4 fpm* ± 4 % or 0.02 m/sec* whichever isgreater * Accuracy specification only valid for velocityreadings above 50 fpmCO 2 Warm up time 1 min (5 minutes for full specification)0 to 5000 ppm 1 ppm2.75 % + 75 ppmCO± 5 % or ± 3 ppm, whichever is greater,0 to 500 ppm 1 ppm@ 20 °C and 50 % RH922 features Range AccuracyAir pressure± 1 % + 1 Pascal / ± 1 % + 0.01 in H2O /± 4000 Pascals / ± 16 in H2O / ± 400 mm H2O /± 1 % + 0.1 mm H2O / ± 1 % + 0.01 mbar /± 40 mbar / ± 0.6 PSI± 1 % + 0.0001 PSIAir velocity 250 to16,000 fpm (1 to 80 m/s) ± 2.5 % of reading at 2000 fpm (10.00 m/s)Air flow (volume) 0 to 99,999 cfm; 0 to 99,999 m 3/hr; 0 to 99,999 l/s Accuracy is a function of velocity and duct sizeTemperature 0 °C to 50 °C (32 °F to 122 °F) 0.1 °C (0.1 °F)Data storage99 readingsWarrantyTwo-yearPowerFour AA batteriesFluke 922/Kit• Airflow meter• 12 inch pitot tube• Two rubber hoses• TPak magnetic strip• TPak strap, 9 inches• TPak latch tab• Four AA 1.5 V alkaline batteries• Users manual• Hard carrying caseOrdering informationIncluded accessoriesCalibration cap, air velocity probe (Fluke 975V only), FlukeView® Formssoftware, power adapter, international power plugs, hard carrying case,three AA alkaline batteries, users manual with safety information.Two rubber hoses, soft carrying case, four AA alkaline batteries 1.5 V,users manual.12 inch pitot tube, two rubber hoses, ToolPak Magnetic Meter Hanging Kit,hard carrying case, four AA alkaline batteries 1.5 V, users manual.ModelsFLUKE-975FLUKE-975VFLUKE-922FLUKE-922/KITAirMeterAirMeter with VelocityAirflow MeterAirflow Meter KitCheck price and availability atwww.fluke.com/wtb22Indoor Air QualityFor more information, go to www.fluke.com/IAQ

Indoor Air Quality ToolsTools to help you maintain good IAQOrdering informationIncluded accessoriesFluke 971 Temperature Humidity MeterTemperature and humidity are two important factors in maintainingoptimal comfort levels and good indoor air quality. Quicklyand conveniently take accurate humidity and temperature readingswith the Fluke 971. The Fluke 971 is invaluable for facilitymaintenance and utility technicians, HVAC-service contractors,and specialists who assess indoor air quality (IAQ). Lightweightand easy to hold, the Fluke 971 is the perfect tool for monitoringproblem areas. With a rugged holster and twist-open protectivesensor cover, the Fluke 971 is built to perform and made to last.Features:• New and improved digital sensor for faster response times• Backlit dual display of humidity and temperature• Measures dew point and wet bulb temperatures• 99 record storage capacity• Ergonomic design with belt clip and protective holster• Compact and lightweight at 188 g (6.6 oz)• Temperature range from -20 °C to 60 °C (-4 °F to 140 °F)• Relative humidity from 5 % to 95 %• Min/Max/Avg/Hold functions• Low battery indicator• One-year warrantyCertificate of Calibration (NIST), Windows compatible softwaredownload utility, DB9 to RS-232 adapter and cable, isokineticprobe, high purity tubing, 1/8 inch hose barb adapter, powersupply, zero count filter, protective holster and hard moldedplastic case, users manual.Fluke 983 Particle CounterThe Fluke 983 Particle Counter measures and displayssix channels of particle size distribution. The Fluke 983holds 5000 logged samples including date, time, counts,sample volume, temperature and relative humidity.Data is easily downloaded using the included windowscompatible utility software. The Fluke 983 is invaluablefor IAQ investigations, allowing you to determinesize distribution of airborne particles or track down aparticle source.Features:• Compact and easy to operate• Graphic liquid crystal display with backlight• Simple connection to computer or printer• Selectable sample time, count data and programmabledelay• Set sample size to cubic feet or liters, set temperaturemeasurements to °C or °F• Data displayed in totalize or concentration modes• Automatic turn-off when battery voltage drops belowsafe operating level• Meets JISB9921:1997 and CE standards• Battery or ac operation with internal rechargeablebattery• Protective holster• Rugged, hard shell carrying case• One-year warrantyModelsFLUKE-983Particle CounterFour AAA alkaline batteries, users manual. FLUKE-971 Temperature Humidity MeterFLUKE-983TPK 220 Thermal Printer Kit, 220 VFLUKE-983TPK 120 Thermal Printer Kit, 120 VFLUKE-CO-205 Aspirator KitFLUKE-CO-220 Carbon Monoxide MeterFLUKE-RLD2 Refrigerant Leak Detector FlashlightSpecialty modelsFluke RLD2 UV RefrigerantLeak Detector FlashlightLeak detection madeeasy. The compact,easy-to-use, RLD2UV flashlight uncoversrefrigerant leaksinstantly. Use the UVlight to find the leakagearea, then, use thelaser pointer to pinpointthe exact leak location.With 100,000 hours oflife, and four operatingmodes, this versatileleak detector is a musthave for HVAC technicians.• Six UV LEDs (395 nm wavelength)detect leak detection dyes• Laser pointer clearly locates centerof the UV field for accuracy• Three LED flashlight with 100,000hour LED life• Operating temperature 0 °C to 50 °C• Four operating modes: flashlight,UV light, laser light, UV/laser lightcombination• Convenient detachable key chaincarabiner and AAA battery includedCO-220 CarbonMonoxide Meter• Stand-alone CO meterthat does not require adigital multimeter• Large backlit LCD displaysCO levels from 0 to1000 ppm• Beeper triggers withincreasing frequency asCO levels rise• MAX hold functionstores and displays themaximum CO level• Automatic sensor zeroingand self-test uponstartupCO-205 Aspirator KitThe CO-205 flue gas samplingaccessory kit includes:• Stainless steel sampling tube• Aspirator• Replaceabfilter• Nose capconnectiothe FlukeCO-210/CO-220Check price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/IAQIndoor Air Quality23

Fluke 1507/1503 Insulation Resistance TestersTroubleshooting and predictive maintenance toolsSelection guideFeatures 1555 1550C 1507 1503 1587 1577Insulation test voltages 50 V,100 V, 250 V, 500 V, 1000 V• •Insulation test voltages500 V, 1000 V• •Insulation test voltages: Userselectable 250 V to 5000 V•Insulation test voltages: Userselectable 250 V to 10,000 V•Insulation resistance0.01 MΩ to 0.1 MΩ to 0.01 MΩ to 0.1 MΩ to2 TΩ 1 TΩ10 GΩ 2 GΩ 2.0 GΩ 600 MΩAuto-discharge of capacitivevoltage• • • • • •Insulation test smoothingreading•Frequency•Capacitance • • •Diode test•Temperature•Min/Max•Low-pass filter (for workon VSDs)•AC/DC voltage • •DC millivolts • •AC/DC milliamps • •ResistanceOrdering information0.1 Ω to20.00 KΩ0.1 Ω to20.00 KΩ0.1 Ω to50 MΩContinuity • •Warranty (years) 3 3 1 1 3 3Remote probe, test leads,alligator clips• • • • • •Type K thermocoupleThese lightweight, affordable insulation testers are perfectfor troubleshooting, commissioning and preventive maintenanceapplications.Features• Automatic calculation of polarization index and dialectricabsorption ratio (1507 only)• Multiple test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V(1507 only)• Remote test probe for rapid testing• Insulation test range 0.01 MΩ to 10 GΩ (1507), 0.1 MΩ to2000 MΩ (1503)• Compare (Pass/Fail) function for repetitive tests(1507 only)• Live circuit detection prevents insulation test if voltage> 30 V is detected• Auto-discharge of capacitive voltage• AC/DC voltage: 0.1 V to 600 V• Lo ohms/Earth-bond continuity (200 mA) for checkingconnections and motor windings• Resistance: 0.01 Ω to 20.00 Ω• One-year warrantyRugged, utility hard case • • • • • •Auto power off • • • • • •Page number 25 25 24 24 17 17•0.1 Ω to50 MΩSpecialty modelsFluke 360 AC LeakageCurrent Clamp MeterCalculate insulation resistance whileequipment is under load by measuringinsulation leakagecurrent. The uniquejaw design of the Fluke360 eliminates theinfluence of adjacentcurrent conductors andmeasures leakage currentdown to 1 μA formonitoring of insulation.The ergonomicdesign of the Fluke 360ensures easy measuring.The measuringclamp fits into tightspaces and the widedisplay angle clearlyshows the measurementresult. The Data Hold buttonkeeps the measured value on thedisplay after removing the clamp forthe measured conductor.The Fluke 360 offers the widestrange of current measurement. Usethe rugged Fluke 360 when it’s notpossible to power down and break thecircuit.Current measurement• Automatic ranging within themanually selected mA or A range• Ranges 3/30 mA and 30/60 A• Current resolution 1 µA/0.01 mAand 0.01 A/0.1 A• Frequency range 50 and 60 Hz• Jaw size: 40 mm (1.55 in) maximumconductor diameter• Auto power offRecommended accessoriesTPAKMagnetic Meter HangerSee page 62TL225Stray Voltage AdapterTest Lead KitC25C101Meter CaseHard CaseSee page 54 See page 54Included accessoriesRemote probe, test leads, testprobes, alligator clips, holster,users manual.Soft carrying pouch,users manual.ModelsFLUKE-1507FLUKE-1503FLUKE-360Insulation TesterInsulation TesterAC Leakage Current Clamp MeterCheck price and availability atwww.fluke.com/wtb24Insulation Resistance TestingFor more information, go to www.fluke.com/1507

1555 and 1550C InsulationResistance TestersSpecificationsPowerful troubleshooting andpredictive maintenance toolsThe new Fluke 1555 and redesigned Fluke1550C insulation resistance testers offerdigital insulation testing up to 10 kV, makingthem ideal for testing a wide range ofhigh voltage equipment including switchgear,motors, generators and cables.• Test voltages up to 5 kV (1550C) and10 kV (1555) provide solutions for allapplications• Warning function alerts the user that linevoltage is present and gives a voltagereading up to 600 V ac or dc for increaseduser safety• Measurements can be stored in up to 99memory locations, and each location isassigned a unique, user-defined label foreasy recall• Long battery life gives the user over 750tests between changes• Automatic calculation of Dielectric Absorption(DAR) and Polarization Index (PI) withno additional setup• Guard system eliminates the effect of surfaceleakage current on high-resistancemeasurements• Large digital/analog LCD for easy viewing• Capacitance and leakage currentmeasurement• Ramp function for breakdown testing• Three-year warrantyApplication noteInsulation resistance testingInsulationresistancetesters canbe used todeterminethe integrityof windingsor cablesin motors,transformers,switch-gear,and electricalinstallations.The testmethod isdetermined by the type of equipmentbeing tested and the reason fortesting. For instance, when testingelectrical cabling or switchgear(low-capacitance equipment) thetime-dependent capacitive leakageand absorption leakage currentsbecome insignificant and decreaseto zero almost instantly. A steadyconductive leakage current flow isreached almost instantly (a minute orless) providing perfect conditions forthe spot-reading/short-time resistancetest.www.fluke.com/IRTThe tester’s accuracy is specified for one year after calibration at operating temperatures of 0 °C to 35 °C. For operating temperaturesoutside the range (-20 °C to 0 °C and 35 °C to 50 °C), add ± .25 % per °C, except on the 20 % bands add ± 1 % per °C.Insulation resistance measurementTest voltage (dc) Range Accuracy (± reading)250 V < 200 kΩ200 kΩ to 5 GΩ5 GΩ to 50 GΩ> 50 GΩ500 V < 200 kΩ200 kΩ to 10 GΩ10 GΩ to 100 GΩ> 100 GΩ1000 V < 200 kΩ200 kΩ to 20 GΩ20 GΩ to 200 GΩ> 200 GΩ2500 V < 200 kΩ200 kΩ to 50 GΩ50 GΩ to 500 GΩ> 500 GΩ5000 V < 200 kΩ200 kΩ to 100 GΩ100 GΩ to 1 TΩ> 1 TΩ10000 V (1555 Only) < 200 kΩ200 kΩ to 200 GΩ200 GΩ to 2 TΩ>2TΩunspecified5 %20 %unspecifiedunspecified5 %20 %unspecifiedunspecified5 %20 %unspecifiedunspecified5 %20 %unspecifiedunspecified5 %20 %unspecifiedunspecified5 %20 %unspecifiedRecommended kits1550C/Kit includes:• 1550C insulation resistance tester• Ruggedized alligator clips• IP67 hard case• NIST traceable certificate of calibration1555/Kit includes:• 1555 insulation resistance tester• Ruggedized alligator clips• IP67 hard case• NIST traceable certificate of calibrationFunctions Range Accuracy (± reading)Leakage current 1 nA to 2 mA ± (5 % + 2 nA)Capacitance measurement 0.01 uF to 15.00 µF ± (15 % rdg + 0.03 µF)Live circuit indicator 30 V to 600 V ac/dc, 50/60 Hz ± (5 % + 2 V)Ordering informationIncluded accessoriesTest leads with alligator clips, ruggedized alligator clips(kits and 1555 only), infrared adapter with interfacecable, FlukeView Forms software, ac power cord, softcarrying case, quick reference guide, users manual.ModelsFLUKE-1550CFLUKE-1550C/KitFLUKE-1555FLUKE-1555/Kit5 kV Insulation Tester5 kV Insulation Tester Kit10 kV Insulation Tester10 kV Insulation Tester KitCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/1550Insulation Resistance Testing25

Fluke 345 Power Quality Clamp MeterThe ideal meter to troubleshoot modern electrical loadsThe Fluke 345 is more than a power meter. Combining thefunctions of a clamp meter, oscilloscope, data logger and digitalpower meter into one handy device, the Fluke 345 is ideal forworking with variable frequency motor drives, high efficiencylighting and other loads using switching electronics.• AC/DC current: Clamp-on measurement of ac current up to1400 A rms and dc current up to 2000 A without breaking thecircuit• Highest safety rating: 600 V CAT IV power analyzer is ratedfor use at the service entrance• Accurate in noisy environments: Clamp meter performs evenwith distorted waveforms present on electronic loads withlow-pass filter• Data logging: Identify intermittent faults by logging anypower quality parameter for minutes, or over a month, includingharmonics• Verify batteries: Direct measurement of dc ripple (%) for batteryand dc systems• Troubleshoot harmonics: Analyze and log harmonics digitallyor graphically• Inrush current: Capture and analyze nuisance tripping, from 3seconds to 300 seconds• Easy to use: Easily confirm power meter setup with largebacklit color display of waveforms and trends• View graphs and generate reports: Use power analyzer withincluded Power Log softwareApplication tipSet up and troubleshoot variablefrequency drives and UPS systems –Verify correct operation by measuringkey parametersHarmonics measurements – Uncoverharmonic issues that can damage ordisrupt critical equipmentInrush capture – Check start-up currentwhere spurious resets or nuisancecircuit breaker tripping occursLoad studies – Verify electrical systemcapacitybefore adding loadsView waveforms for equipment checking and setup.Selection guideSingle PhaseThree PhaseBasic measurements Application use VR1710 345 43B 1735 1740 430 1750 1760Energy studiesMeasure V, I, kW, Cos/ Get detailed power andDPF, kWhrenergy consumption• • • • • • •Measure MIN/MAX andAVG valuesaudits and pinpointsavings opportunities.profiles during energy• • • • • • •10 day logging • • • • • • •Basic harmonics studyTHD measurement(V & I)Harmonics 1 to 25Discover the sourceof distortion in yourinstallation, so that youcan filter those loads ormove them to separatecircuits.• • • • • • • •for V & I • • • • • • • •Advanced harmonics studyFull harmonic spectrum If distorting loads arePower harmonicscausing problems inyour installation, youneed comprehensivedata to identify thesource and create asolution.Basic industrial PQ troubleshooting*Oscilloscope function When troubleshootingVoltage dips and swellsin the field, graphicaldata enables you totrace the source of theproblem at hand.Advanced industrial PQ troubleshooting**Comprehensive loggingcapabilityComplex installationsoften require a deeperdive into measurementdata. Multiple loadsmay be interactingrandomly to cause asingle problem.• • • • • • •• • • • •• • • • • •• • • • • •• • • • • •Transient capture • • • • •Flicker• • • • •For more information and detailed product selector go to:http://www.fluke.com/fluke/usen/products/prodselection?product=pqt&category=pqttopEquipment performance measurement—power consumedby single- and three-phase balanced loads.Recommended accessoriesTP220AC220Industrial Test ProbesAlligator ClipsSee page 57 See page 57Ordering informationTLK291Fused Test Probe SetC550Tool BagSee page 54Included accessoriesTest leads, alligator clips, test probes, Power Log software, USBcable, international ac adapter/battery eliminator, soft carryingcase, users manual, multi-language manual CD.ModelsFLUKE-345Clamp-On Power MeterCheck price and availability atwww.fluke.com/wtb26Power Quality AnalyzersFor more information, go to www.fluke.com/pq

Fluke 430 Series Three-PhasePower Quality AnalyzersPinpoint power problems faster, safer andin greater detailThe Fluke 435 and 434 Three-Phase Power QualityAnalyzers help you locate, predict, prevent andtroubleshoot problems in three- and single-phase powerdistribution systems. Troubleshooting is faster withon-screen display of trends and captured events, evenwhile background recording continues.• Logged data analysis: PowerLog software providedownload, analysis reporting in minutes• AutoTrend: Every measurement you see is alwaysautomatically recorded, without any setup• Automatic Transient Mode: Capture 200 kHz waveformdata on all phases simultaneously up to 6 kV• Fully Class-A compliant: Conduct tests according tothe stringent international IEC 61000-4-30 Class-Astandard• Inrush mode: For troubleshooting nuisance circuitbreaker tripping• Logger function: Configure for any test conditionwith memory for over 400 parameters at user definedintervalsRecommended accessoriesI5sPQ3i430-flex-4pk3 pack of 5 A precision 4 pack of 3000 Acurrent clamps flexible current probesC435Water-tight hardcase with rollersGPS430GPS timesynchronization moduleResourcesMore PQ info online atwww.fluke.com/pqGet a free PQ training DVDwww.fluke.com/PQ-DVDSign up for a PQ seminarwww/fluke.com/FPQseminar• Troubleshoot real-time:Analyze the trendsusing the cursors andzoom tools—even whilebackground recordingcontinues• Measure all threephases and neutral:With included four currentprobes• System-Monitor:Up to ten power qualityparameters on onescreen according toEN50160 power qualitystandardWhat’s includedFeaturesFeatures 435 434*Measures voltage, current, dips, swells,interruptions, harmonics, inter-harmonics, flicker,power, energy, transients, frequency, unbalance,• •inrush, EN50160 overviewLogger function with multi-parameter logging • Optional*Mains signaling • Optional*Memory size 16 MB 8 MBCurrent probes 3000 A flexible (4) 40 A/400 A clamp (4)Carrying case Water-tight hard case with rollers Rugged hard caseSoftware Fluke Power Log and FlukeView® FlukeView®Three-year warranty • •*Optional functionality can be added with upgrade kit.Fluke 435Ordering information (basic versions do not include current probes)Included accessoriesFour flexible current probes (i430 Flex), five test leads andclips, battery charger, FlukeView software, Power Log software,optical USB cable, color localization set, hard carrying case withrollers, getting started manual, users manual on CD.Four current probes (i400s), five test leads and clips, batterycharger, FlukeView software, optical USB cable, colorlocalization set, hard carrying case, getting started manual,users manual on CD.ModelsFLUKE-435FLUKE-434Three-Phase Power Quality AnalyzerThree-Phase Power Quality AnalyzerCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/pqPower Quality Analyzers27

Fluke 43B Power Quality AnalyzerPower quality analysis plus a scope and a meterFluke 43B Power Quality Analyzer performs thesurements you need to maintain power systems,bleshoot power problems, and diagnose equipmentures. The 43B has 20 storage locations and can storeas well as screens.asic measurements: Voltage, current, and powerarmonics up to 51st, THDscillioscope function: View voltage and currentwaveformsransients: Capture up to 40 voltage transients andwaveform eventsetailed event capture: Cursors give time and date ofags and swellslukeView® software: Analysis and reporting, suppliedwith USB connection leadattery operated: 6.5 hours of operation from NiMHatteryWarranty: Three-years for analyzer, one-year forccessoriesApplication tipThe high speed oscilloscopecapability is particular usefulfor service and commission ofelectronic switching loads.The wide band scope can display thedetails of PWM drives waveforms.Fluke Norma 4000 and 5000Precision Power AnalyzersFluke Norma 4000Fluke Norma 4000 and 5000 are idealfor field and laboratory testingFluke Norma Analyzers offer easy and straight-forwardoperation with unmatched price performance.Features include: 1 to 6 power phases, 5.7 in/144mm color display, harmonic analysis, scope mode,vector diagram display, recorder function, FlukeNormaView PC software and 4 MB RAM datamemory.The inrush screen shows the effects ofload start up.Recommended accessories• Choose the right model for your application: a variety of standard configurationsallows users to choose the exact functionality required for their unique application• Electrical measurement integrity and safety: inputs are galvanically isolated toavoid short circuits in all applications and simultaneous parallel acquisition of allphases allows accurate viewing of dynamic events dc to 3 MHz/10 MHz bandwidth forreliable measurement precision• Voltage, current and power harmonics FFT analysis: to the 40th harmonic, vectordiagram, and Digital Oscilloscope (DSO) mode included in the base unit for completeanalysis capability• Complete electrical and mechanical analysis: PI1 process interface to measuretorque and speed with external sensors,plus four analog outputs for easy use onmotor and drive applications• Data download, analysis and reportwriting with: supplied Fluke Norma-View PC softwarei2000 FLEX32 AAC Current ClampPlanar ShuntSee page 60 (Norma 4000/5000)i5sAC Current Clamp100 AShunt with Cables(Norma 4000/5000)Fluke Norma 5000Ordering information (basic versions do not include current probes)80TK150 AThermocouple Module Shunt with CablesSee page 59 (Norma 4000/5000)Included accessoriesVoltage and current probes, FlukeView® software, power qualityinstructional CD, USB interface cable, line voltage adapter/battery charger, hard case, users manuals.Power supply cable, NormaView PC software, test certificate,calibration values, users manual.ModelsFLUKE-43BNorma 4000Norma 5000Power Quality AnalyzerHigh Precision Power AnalyzerHigh Precision Power AnalyzerCheck price and availability atwww.fluke.com/wtb28Power Quality AnalyzersFor more information, go to www.fluke.com/pq

Fluke 1735 Three-Phase Power LoggerGeneral power quality loggingThe Fluke 1735 Three-Phase Power Loggeris the ideal electrician or technician’s toolfor conducting energy studies and basicpower quality logging. Set up the 1735 inseconds, with the included flexible currentprobes and color display. The 1735 logsmost electrical power parameters and harmonicsand captures voltage events.• Ideal for field operation: Compact,rugged instrument; easy to use, quicklyconfirm instrument setup with colordisplay of waveforms and trends• Full system electrical measurementcapability: Three phases and neutralwith included four flexible currentprobes• Prove the benefit of efficiency improvements: Record power andassociated parameters for up to 45 days. Monitor maximum powerdemand over user-defined averaging periods• Check the power quality effects energy saving devices: Measureharmonics and distortion caused by loads and improve reliabilityby capturing voltage dips and swells from load switching• Easy PC connectivity and operation: USB interface for plug andplay operation; download, view graphs and automatically generatereports with included Power Log software• Reliable operation: Two-year warrantyApplication tipThe Fluke 1735 provides the importantdata for electrical energy surveys.Detailed power information enables load balancing.Fluke VR1710Power Quality RecorderSupplied PowerLog software enables detailed energyanalysis.Detect and record voltage quality problems• Fast and easy recording of voltage trends, dropouts,and power quality: easily pinpoint the root cause ofsingle phase voltage problems• Extremely easy to use: plugs directly into the mainspower socket and capture data• Continuous recording of all values with no gaps:save testing time by getting the whole picture with oneinstrument that records both events and voltage• Clear graphical summary of data and quick overviewof key power quality parameters: Take the guessworkout of diagnosing voltage quality problems• Quickly see what happened and when: Min, Max,and Average RMS values (1/4 cycle) with time stamp,transient display (>100 μs) with time stamp• Easily identify problems: Power quality or equipmentrelated Flicker recording to EN 61000-4-15, individualharmonic and THD values with trends• Statistical analysis of single phase voltage events:Reduces analysis time by tracking event quantities andmagnitudes• Includes PowerLog software: For quick download,analysis, and automatic reporting• Save time: Generate power quality reports automaticallywith pre-set templates• New: Transient sensitivity settingCheck fluke.com support area for firmware and softwareupgrades for Fluke power quality products.What’s includedFluke 1735Fluke VR1710Ordering informationIncluded accessoriesFour flexible current probes (15 A/150 A/3000 A), Power Log software,voltage leads and clips, color localization set, PC interface cable,international ac adapter (115 V/230 V, 50 Hz/60 Hz), soft carrying case,users manual and multi-language manual CD.ModelsFLUKE-1735Three-Phase Power LoggerUSB cable, Power Log software CD, universal power cord adapters. FLUKE-VR1710 Voltage Quality RecorderCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/pqPower Quality Analyzers29

Fluke 1750 Three-Phase Power RecorderNever miss capturing a disturbanceFluke 1740 Series Three-PhasePQ Loggers MemoboxFeatures 1743/1744 1745 1750Measures common power parameters: V, A, W, VA,VAR, PF, energy, flicker, voltage events, and THDMeasures voltage and current harmonics to the50 th , unbalance, and mains signalingTransient capturePDA supportGPS clock synchronizationUPS ride throughDimensions1743Specifications• Power quality that meets the standard: Allmeasurements comply with IEC61000-4-30standards for correct evaluation of all measuredvalues including voltage, current, power,harmonics, flicker etc.• Quick and reliable configuration: PDAwireless “front panel interface” provides awindow into what the instrument is recording,enabling quick and reliable configuration evenin awkward test locations• Threshold-free set up: Apply thresholds afterdata is collected with Fluke Power AnalyzeSoftware—no need to worry about missedinformation due to incorrect setups• Captures everything: Cross-channel and currenttriggering capture every measurement, onevery channel, every time• Intuitive PC software: Easily analyze dataand generate reports with automated EN50160reporting and compliance• Measure every parameter: Voltage and currenton three phases, neutral, and groundThe Fluke 1740 Series Three-Phase Power Quality Loggersare instruments for technicians who troubleshoot and analyzepower distribution systems. The included PQ Log softwarequickly assesses the quality of power at the serviceentrance, substation, or at the load, according to the latestEN50160 standard.• Plug and play: Setup in minutes with automatic currentprobe detection and powering• Installs inside the cabinet: Compact, fully-insulatedhousing and accessories fit easily in tight spaces, nextto live power• Determines the root cause: Included PQ Log softwarequickly analyzes trends, creates statistical summaries,and generates detailed graphs and tables• Measure voltage with premium accuracy: IEC61000-4-30 Class-A compliant voltage accuracy (0.1 %)• • •• • •3s170 mm x 125 mm x 55 mm(6.9 in x 5.1 in x 2.2 in)>5 hours282 mm x 216 mm x 74 mm(11.5 in x 8.8 in x 3 in)••5 min per interruption,60 min total215 mm x 310 mm x 35 mm(8.5 in x 12.2 in x 3.5 in)Weight (approx.) 0.9 kg (2 lb) 1.4 kg (3 lb) 6.3 kg (14 lb)Ordering informationIncluded accessoriesAcquisition unit, PDA and charger, power plug adapters, four 400 Acurrent probes, five test leads and clips, SD memory card, Fluke PowerView and Fluke Power Analyze software, power cord with internationalplug set, ethernet cable, color localization set, users manual and CD.ModelsFLUKE-1750Three-Phase Power RecorderFour flexible probes 15/ 150/1500/3000 A with 2 m cable, PQ LogFLUKE-1745 Power Quality Logger – Memoboxsoftware, RS-232 interface cable and USB adapter, four dolphin clips, testleads for voltages and power supply, color localization kit, carrying bag,FLUKE-1744 Power Quality Logger – Memoboxtest certificate with measurement values, users manual, multi-language FLUKE-1743 Power Quality Logger – Memoboxmanual CD.In the U.S., these power quality recorders are sold exclusively through power quality representatives. To request ademonstration, or to order, call 1-888-257-9897 or email questions to fpqsupport@fluke.com.What’s includedFluke 1750Sample PDA screensConfigurations aresimple with wiringdiagrams to guide you.View measurementsreal-time withwireless PDA interface.Online resourcesLearn how to do whatyou need to do, usingFluke power quality tools.Go to:www.fluke.com/pqtrainingngProduct demo:www.fluke.com/1750Online training:www.fluke.com/pqonlinetrainingApplication notes:www.fluke.com/pqappnotesHands-on seminars:www.fluke.com/pqtrngseminarsProduct information:www.fluke.com/pqproductsCheck price and availability atwww.fluke.com/wtb30Power Quality AnalyzersFor more information, go to www.fluke.com/pq

Pick the right process tool for youProcess Tools Selection GuidePrecisionMultifunctionProcessCalibratorIntrinsicallySafeCalibratorDocumentingProcessCalibratorProcess mAClamp MeterProcessMeter®Test Tool Loop CalibratorPressureCalibratorTemperatureCalibratorModels 773 789 715 719 724 726 725Ex 744MeasureV dc 30 V 1000 V 25 V 30 V 30 V 30 V 300 VV ac (true-rms) 1000 V 300 VResistance 40 M 3200 4000 3200 11 kA dc 20.99, 99.9 mA 30 mA, 1 A 24 mA 24 mA 24 mA 24 mA 24 mA 110 mAA ac•Frequency 20 kHz 15 kHz 10 kHz 50 kHzPressure1 psi, 30 psi,100 psi and• 1 • 5 • 1300 psi 2Temperature: RTDs 7 types 8 types 7 types 8 typesTemperature: TCs 12 types 13 types 12 types 13 typesSource/SimulateV dc 10 V 20 V 10 V 20 V 10 V 15 VResistance 3200 4000 3200 11 kmA dc 24 mA 24 mA 24 mA 24 mA 24 mA 24 mA 22 mAmA source; auto step,auto ramp• • • • • • •Frequency 15 kHz 10 kHz 50 kHzTemperature: RTDs 7 types 8 types 7 types 8 typesTemperature: TCs 12 types 13 types 12 types 13 typesRecordMin/Max • • •Hold • • • •As found/As left results•Log data•Upload data to PC•Remote operation • •Features24 V loop supply • • • • • • 12 V •Non-contact mAmeasurement•HART communication•Integrated hand pressurepumpElectricIntrinsically safe (ATEX)•Warranty Three-year Three-year Three-year One-year Three-year Three-year Three-year Three-yearNIST traceablecertification• • • • • •Accessories 3 A/B A/B C A/B A/BPressure enabled 4 • • • •See page 32 33 34 38 37 36 39 351 Fluke 700 Pressure Modules required.2 Either the internal sensor or a Fluke 700 Pressure Module may be used.3 Accessories: A. Compatible with LockPak B. Compatible with TPAK C. Accepts hanging straps from TPAK D. Optional accessories.4 Fluke Process Calibrators in this guide displaying the Pressure Enabled symbol display readings from the 700 Series Pressure Modules.5 Fluke 700PEx Pressure Module required.Check price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/processtoolsProcess Calibration Tools31

Fluke 771, 772 and 773mA Process Clamp MetersFluke 771 Fluke 772 Fluke 773N10140Use the Fluke 771, 772and 773 to:• Measure 4-20 mA signals without”breaking the loop,” savetime and money troubleshooting4-20 mA signalsUse the Fluke 772 and773 to:• Source 4-20 mA signals fortesting control system I/O orI/Ps• Simulate 4-20 mA signals fortesting control system I/O• Measure 4-20 mA signals within-circuit measurement• Power a transmitter with the24 V loop power supply• Automatically ramp and stepchange the 4-20 mA output forremote testingUse the Fluke 773 to:• DC voltage measurement to verify 24 V power suppliesor voltage I/O signals• Source dc voltage to test voltage input devices• Scaled mA output signal enables a logging DMM (289) torecord 4-20 mA signal without breaking the loop• mA in/out: simultaneously source a mA signal whilemeasuring a mA signal with the clampResourcesMore info online atwww.fluke.com/processtoolsCheck out the 773 video atwww.fluke.com/773ROI calculator:www.fluke.com/77X_ROIAll the information you need atwww.fluke.com/processsolutionsFeaturesmAmeasurew/jaw771 •mAmeasureIn circuit mA source mA simLooppower24 VDCVsource0-10 VDCVmeasure0-30 VScaled mAoutput tomA inputmA in/out772 • • • • •773 • • • • • • • • •SpecificationsFunction Resolution and range Accuracy Notes0 to 20.99 mA 0.2 % + 5 counts Measured by clamp771, 772, 773 mA measurement21.0 mA to 100.0 mA 1 % + 5 counts772 and 773 mA measurement 0 to 24.00 mA 0.2 % + 2 counts Measured in series with test jacks772 and 773 mA source 0 to 24.00 mA 0.2 % + 2 countsMaximum mA drive: 24 mA into1,000 ohms772 and 773 mA simulate 0 to 24.00 mA 0.2 % + 2 counts Maximum voltage 50 V dc773 Voltage source 0 to 10.00 V dc 0.2 % + 2 counts 2 mA maximum drive current773 Voltage measure 0 to 30.00 V dc 0.2 % + 2 countsApplication tipWith the 77X family of millamp clampmeters you can measure 4 to 20 mAI/O signals without “breaking theloop”. Once a bad signal is found thesourcing functions of the 772 and 773can be used to further troubleshootthe loop.General specifications 771 772 773Battery 2 1.5 V, Alkaline, IEC LR6 4Working hours 20 hours typical 12 hours @ 12 mA source into 500 ohmsSize (HxWxL)59 mm x 38 mm x 212 mm(2.32 in x 1.5 in x 8.35 in)41.3 mm x 76 mm x 248 mm (1.625 in x 3 in x 9.75 in)Weight 260 g (9.1 oz) 415 g (14 oz)Operating temperature -10 °C to 50 ºCIP rating IP 40WarrantyThree-year, one-year on mA clamp assembly and cableOrdering informationIncluded accessoriesSoft carrying case, usersmanual.Test leads, alligator clips andhanging strap, soft carryingcase, users manual.ModelsFLUKE-771FLUKE-772FLUKE-773Milliamp Process Clamp MeterMilliamp Process Clamp MeterMilliamp Process Clamp MeterCheck price and availability atwww.fluke.com/wtb32Process Calibration ToolsFor more information, go to www.fluke.com/771

Fluke 789 and 787ProcessMeter Test ToolsDesigned andConforms toIEC 1010-1600VCAT IVTrueRMSFluke 789 ProcessMeterWith the Fluke 789 ProcessMeter, process techniciansan do a lot more while carrying a lot less.24 V loop power supplyHART mode setting with loop power(adds 250 ohm resistor)Double-sized, dual display20 mA drive into 1200 ohmsBacklight with two brightness settings0 % to 100 % mA Span Check buttons to togglebetween 4-20 mAInfrared I/O serial port compatible withFlukeView® Forms SoftwareImproved battery power with four AA batteriesPlus all the proven 787 featuresFluke 787 ProcessMeterSimultaneous mA and % ofscale readout on mA output25 % Manual Step plus AutoStep and Auto Ramp on mAoutputMin/Max/Average/Hold/Relative modesExternally accessible batteryfor easy changesResourcesMore info online atwww.fluke.com/processtoolsCheck out our latest videos atwww.fluke.com/ptoolsvideosIncrease your skills atwww/fluke.com/processtrainingAll the information you need atwww.fluke.com/processsolutions(Fluke 789 only)Fluke 787SpecificationsMeasurement function Best accuracy range and resolution (% of reading + LSD)V dc 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V 0.1 % + 1V dc (true-rms) 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V 0.7 % + 2mA dc 30.000 mA .05 % + 2A dc 1.000 A (0.440 A continuous) 0.2 % + 2A ac 1.000 A (0.440 A continuous) 1 % + 2Resistance 400.0 , 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M 0.2 % + 1Frequency (0.5 Hz to 20 kHz) 199.99 Hz, 1999.9 Hz, 19.999 kHz .005 % + 1Diode test789: 2.000 V (shows diode voltage drop) 787: 2.400 V(shows diode voltage drop)2 % + 1 2 % + 1ContinuityBeeps for resistance < approx. 100 ohmsOutput function Range and resolution Drive capabilityDC current output (internalbattery operation)DC current simulate (external24 V loop supply, up to 48 V on789 only)0.000 mA to 20.000 mA or 4.000 mA to 20.000 mA(selectable at power-up) Over-range to 24.000 mA0.000 mA to 20.000 mA or 4.000 mA to 20.000 mA,(selectable at power-up) Over-range to 24.000 mA789: 24 V complianceor, 1,200 ohms,@ 20 mA 787: 12 Vcompliance or,500 ohms, @ 20 mAAccuracy(% of span).05 %1000 ohms, @ 20 mA .05 %24 V loop supply 789: Minimum 24 V 787: Not available 250 ohms @ 20 mA > 24 VCurrent adjustment modesManual: Coarse, Fine, 25 % and 100 % step (100 % step 789 only)Automatic: slow ramp, fast ramp, 25 % stepTemperature range of 18 °C to 28 °C, for one year after calibration.Maximum voltage applied between any jack and earth ground:1000 V rms. Storage temperature: -40 °C to 60 °C.Operating temperature: -20 °C to 55 °C. Relative humidity: 95 % up to 30 °C; 75 % up to 40 °C; 45 % up to 50 °C; 35 % up to 55 °C.Safety: Designed in accordance with EN61010, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92 Over-voltage CAT III.Size (HxWxL)/weight (787 with holster): 52 mm x 98 mm x 201 mm (2.06 in x 3.86 in x 7.93 in)/638 g (1.4 lb).Size (HxWxL)/weight (789): 50 mm x 100 mm x 203 mm (1.97 in x 3.94 in x 8.00 in)/600 g (1.3 lb).Warranty: Three-year.Recommended accessoriesTPAKTL220MagneticSureGrip IndustrialMeter HangerTest Lead SetSee page 62 See page 5580T-150UPV350UniversalPressure VacuumTemperature ProbeModuleSee page 59 See page 63Ordering informationIncluded accessoriesTest leads, alligator clips, 4 AA alkaline batteries (installed), quick refer-rence guide, users manual, multi-language manual CD.Test leads, alligator clips, holster with test lead storage, one 9 V alkalinebattery (installed), quick reference guide, users manual, multi-languagemanual CD.ModelsFLUKE-789FLUKE-787ProcessMeterProcessMeterCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/processmetersProcess Calibration Tools33

Fluke 715, 707 and 705 Loop CalibratorsComplete family of volt/mA calibratorske 715 Volt/mA Calibratorurce voltage to 200 mV or 20 Vasure loop current (0 to 20 mA, 4 to 20 mA) signalsth 0.01 % accuracy and 1 µA resolutionasure voltage output process signals from PLCs,nsmittersurce or simulate 4-20 mA loop currentV loop supply with simultaneous currentasurementmp and Step Ramp output functionske 707 and 705novative output adjustment dial on 707 providesA and 100 µA resolution and one-hand operationrge display and simple interface for ease of usemultaneous mA and % readout for quick, easyerpretation of readingsA accuracy of 0.015 % on the Fluke7 and 0.02 % on the 705RT mode on 707 connects 250m resistor in series with 24 Vp for compatibility with HARTmmunicatorssh button 25 % steps for fast, easyearity checkspan Check” for fast confirmation ofo and spanSelectable slow and fast linear step ramp provideramping outputs for valve slewing, remote testing andloop functional testsFluke 707• 24 V internal loop supply, so you can power and read atransmitter at the same time without carrying a DMM• 0-20 mA or 4-20 mA default start up modesSpecialty modelsFluke 707 ExIntrinsically SafeLoop CalibratorSee page 39 for moreinformation.ResourcesMore info online atwww.fluke.com/processtoolsCheck out our latest videos atwww.fluke.com/ptoolsvideosAll the information you need atwww.fluke.com/processsolutionsSpecificationsFunctions Fluke 705 and 707 Fluke 715Voltage measurementRange 0 V to 28 V 0 mV to 200 mV 0 V to 25 VResolution 1mV 10 µV 1mVAccuracy 705: 0.025 % Rdg + 1 LSD 707,707Ex: 0.015 % Rdg + 2 LSD0.01 % Rdg + 2 LSDCurrent measurementRange 0 mA to 24 mA 0 mA to 24 mAResolution 0.001 mA 0.001 mAAccuracy 705: 0.02 % Rdg + 2 LSD 707,707Ex: 0.015 % Rdg + 2 LSD0.01 % + 2 LSDCurrent sourcingRange10 mA to 20 mA or 4 mA to 20 mA 0 mA to 20 mA or 4 mA to 20 mAAccuracy 705: 0.025 % Rdg + 2 LSD 707,707Ex: 0.015 % Rdg + 2 LSD0.01 % Rdg + 2 LSDDrive capability705: 1000 @ 24 mA 707: 1200 @24 mA 707Ex: 700 @ 20 mA1000 @ 24 mALoop power while measuring mA 24 V 24 VVoltage sourcing0 mV to 200 mV or 0 V to 20 VDisplay current and % of span Yes mA or %Auto step, auto ramp Yes YesSpan Check Yes YesBattery life 18 hours typical, at 12 mA 18 hours typical, at 12 mAWarrantyThree-yearWill over-range to 24 mA.Recommended accessoriesTL28AHeavy DutyTest Lead SetTL220SureGrip IndustrialTest Lead SetSee page 55Ordering informationIncluded accessoriesTest leads, alligator clips, holster with test lead storage, NIST-traceablecalibration report and data, single 9 V alkaline battery, instruction sheet(14 languages).ModelsFLUKE-715FLUKE-707FLUKE-707 ExFLUKE-705Volt/mA CalibratorLoop CalibratorIntrinsically Safe Loop CalibratorLoop CalibratorC550Tool BagSee page 54PV350Pressure VacuumModuleSee page 63Check price and availability atwww.fluke.com/wtb34Process Calibration ToolsFor more information, go to www.fluke.com/loop

Fluke 741B, 743B and 744 CalibratorsCalibrate/troubleshoot process control instrumentationPressureEnabledalibrate temperature, pressure, voltage, current,sistance and frequency instrumentsuilt-in procedures for transmitters, square rootansmitters, pressure and temperature switchesmultaneously measure and sourceutomatically capture calibration resultsocument procedures and results to meet ISO000, EPA, FDA, OSHA, and other governmentquirementseasure/simulate 13 types of thermocouples andght RTDsore up to 8,000 readings in data logging mode43B and 744 only)otected against dirt, dust and moisture; unafctedby vibrationcludes a PC interface (743B and 744 only)perate in English, French, German, Italian andpanishne- and two-year calibration cycles and aree-year warranty (one-year for pressureodules)4: Get HART-abilityFluke 744 offers all of the capabilities of theB, plus the ability to calibrate, maintain, andbleshoot HART instrumentation. IntegratedHART communication functions permit you to monitor,control, and calibrate HART instrumentation. Ithandles fast pulsed instruments such as RTD transmittersand PLCs, with pulses as short as 1 ms.See www.fluke.com/744upgrade for the latestlist of HART instruments.Recommended softwareInstrumentationmanagement softwareThe Fluke 743B and 744 are compatiblewith Fluke 700SW DPC/TRACKsoftware and with software fromCornerstone, Emerson, Honeywell,On Time Support, Prime Technologies,Yokogowa, Intools, Meridiumand Beamex.For more information, visitwww.fluke.com/softwareResourcesMore info online atwww.fluke.com/processtoolsAll the information you need atwww.fluke.com/processsolutions741B: A complete documenting calibratorThe 741B is the economical choice for plants that don’t usePCs or that require traditional paper forms. It has storagecapacity for a day’s calibration and measurement data.When you’re back at the shop, recall the data on-screen tofill out calibration forms.743B: More memory, plus a PC interfaceand data loggingThe 743B has all the capabilities of the 741B plus a PCinterface that lets you load procedures, lists, and instructionscreated with software—or unload data for printing,archiving, and analysis. With its expanded memory, the743B can hold a full week of calibrations and procedures.Fluke 743Bwww.fluke.com/ptoolsvideosRecommended accessoriesSpecificationsFunctions Measure SourcingDC voltage 0.025 % reading +0.005 % full scaleDC current 0.01 % reading +0.015 % full scale0.01 % output +0.005 % full scale0.01 % output +0.015 % full scaleResistance 0.05 % reading + 50 mΩ 0.01 % output + 40 mΩFrequency 0.05 % 0.01 %Thermocouples 0.3 °C 0.2 °CRTDs 0.3 °C 0.1 °CPressureTo 0.25 % of full scale, per pressuremodule specificationsOrdering informationSummary specifications: best case, mid-range,one year.Battery life: Typically over eight hoursInternal battery pack: NiMH 3500 mAhBattery replacement: Via snap-shut doorwithout opening calibrator; no tools requiredWeight: 1.4 kg (3 lb, 1 oz)Size (HxWxD): 236 mm x 130 mm x 61 mm(9.3 in x 5.1 in x 2.4 in)700PxxPressure ModulesSee page 3880PK-25SureGrip PiercingTemperature ProbeSee page 58700PTP-1C789PneumaticMeter andTest PumpAccessory CaseSee page 59 See page 54Included accessoriesIndustrial test leads (2 sets), test clips (2 sets), test probes, NiMHbattery pack, battery charger, serial port cable, DPC/TRACKsample version with free PC communication utility software, HARTcommunications cable, HART user’s manual, NIST traceable calibrationcertificate and data, instruction manual.Industrial test leads (2 sets), test clips (2 sets), test probes, batterypack, battery charger, serial port cable (743B only), DPC/TRACK sampleversion with free PC communication utility software (743B only), NISTtraceable calibration certificate and data, instruction manual.ModelsFLUKE-744FLUKE-743BFLUKE-741BFLUKE-700SDocumenting Process CalibratorDocumenting Process CalibratorDocumenting Process CalibratorDPC/Track SoftwareCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/740Process Calibration Tools35

Fluke 726 and 725 MultifunctionProcess CalibratorsSpecificationsluke 726 Precision MultifunctionProcess Calibratorhe Fluke 726 measures and sources almost all proessparameters and can calibrate almost anything.nterpret results without the help of a calculator andtore measurement data for later analysis.Precise measurement and calibration source performance,accuracies of 0.01 %Transmitter error% calculation, interpret calibrationresults without a calculatorMemory storage for up to eight calibration results,return stored calibration data from the field for lateranalysisFrequency totalizer and frequency pulse train sourcemode for enhanced flowmeter testingHART mode inserts 250 ohm resistor in mAmeasure and source for compatibility with HARTinstrumentationIntegrated pressure switch test allows you to capturethe set, reset and deadband of a switchCustom RTD curves, add calibration constants forcertified RTD probes for temperature measurementVoltage input protection design for improvedreliabilityFluke 725 MultifunctionProcess CalibratorPressureEnabled• Measure volts, mA,RTDs, thermocouples,frequencyand ohms totest sensors andtransmitters• Source/simulatevolts, mA, thermocouples,RTDs,frequency, ohmsand pressure to calibratetransmitters• Measure/sourcepressure using anyof 29 Fluke 700PxxPressure Modules• Source mA with simultaneouspressure measurement to conductvalve and I/P tests• Support flow meter testing withfrequency and counts per minute(CPM) functions• Perform fast linearity tests withauto step and auto ramp featuresTake the 725 virtual demo tour atwww.fluke.com/725demoMeasure and sourceFunctions Range or type Resolution Accuracy NotesVoltage 0 to 100 mV 0.01 mV 0.01 %, Max load, 1 mA0 to 10 V (source)0 to 20 V (source)0 to 30 V (measure)0.01 V0.01 V0.01 V0.02 %Rdg + 2 LSDmA 0 to 24 0.001 mA 0.01 %,0.02 %Rdg + 2 LSDMax load, 1000 mV (TCterminals)OhmsHz - CPM-10.00 mV to+75.00 mV15 to 3,200 5 to 4,000 2.0 to 1,000 CPM1 to 1000 Hz1.0 to 10.0 kHz10.0 to 15.0 kHz.01 mV 0.01 %, 0.02 %of range + 1 LSD0.01 to 0.1 0.1 CPM1Hz0.1 kHz0.1 kHz0.10 to 1.0 0.015 %± 0.05 %± 0.05 %± 0.25 %± 0.05 %Loop supply 24 V dc N/A 10 %T/C J, K, T, E, L, N, U, XK 0.1 °C, 0.1 °F to 0.7 °Cto 0.2 °CT/C B, R, S, BP 1 °C, 1 °F to 1.7 °Cto 1.2 °CRTDs Cu (10), Ni120 (672)Pt 100, 200, 500,1000 (385)Pt 100 (3916),Pt 100 (3926)Unique 726 specifications are bolded.0.01 °C,0.01 °F0.1 °C, 0.1 °Fto 0.15 °Cto 0.2 °CSource;5 V p-p1 V to 20 V p-psquarewave,-0.1 V offsetGeneral specificationsStorage temperature:-20 °C to 71 °COperating temperature:-10 °C to 55 °CRelative humidity:90 % (10 °C to 30 °C);75 % (30 °C to 40 °C);45 % (40 °C to 50 °C);35 % (50 °C to 55 °C)Shock: 1 meter drop testSafety: CSA C22.2No. 1010.1:1992EMC: EN50082-1:1992 andEN55022:1994 Class BSize (HxWxD): 200 mm x96 mm x 47 mm (7.9 in x3.8 in x 1.9 in)Weight: 650 g (23 oz)Battery: Four AA alkalinebatteriesBattery life: 25 hours typicalWarranty: Three-yearsIntrinsically safe version available(see page 39)Recommended accessoriesSimultaneous function capability Channel A Channel B24.000 mA dc M M or S24.000 mA dc with 24 V loop supply M100.00 mV dc M or S30.000 V dc measure M20.000 V dc measure; 10.000 V dc source; 20.000 V dc source M or S15 to 3200 Ohms (725); 5 to 4000 Ohms (726) M or SThermocouple J, K, T, E, R, S, B, M, L, U, N, XK, BPM or SRTD Cu 10, Ni120; Pt100 (392); Pt100 (JIS); Pt100, 200, 500, 1000 (385), XK and BPM or SPressure (requires Fluke 700PXX Modules) M M used as SFrequency; 10 kHz; (15 KHz 726)M or SM = Measure, S = Source/SimulateTPAK80PK-27MagneticIndustrial SurfaceMeter HangerTemperature ProbeSee page 62 See page 58700PxxC125Pressure ModulesSoft Carrying CaseSee page 38Ordering informationIncluded accessoriesTest leads, test clips, one pair of stackable testleads, product overview manual, users manual in14 languages on CD.ModelsFLUKE-726FLUKE-726 ExFLUKE-725Precision Multifunction Process CalibratorIntrinsically Safe Precision Multifunction Process CalibratorMultifunction Process CalibratorCheck price and availability atwww.fluke.com/wtb36Process Calibration ToolsFor more information, go to www.fluke.com/726

Fluke 712, 714 and 724Temperature CalibratorsThe Fluke 710 Series temperature calibrators deliveroutstanding performance, durability and reliability.And with a push-button interface, similar to themultifunction Fluke 740 Series Documenting ProcessCalibrators, the 710 Series are easy to use. Eachcalibrator is EMI tolerant, dust- and splash-resistant,and features a removable battery door for quick batterychanges.Fluke 714 Thermocouple Calibrator• Measure temperature from TC probes• Simulate TC output• Operable with nine types of thermocouples• Calibrate linear TC transmitter with mV sourcefunction• Selectable °F or °C• 25 % stepping, auto-step and auto-ramp• Available as accessories: Fluke 700TC1 and TC2Thermocouple Mini-plug Kits• Ramp and Step Ramp output functionsFluke 712 RTD Calibrator• Compatible with pulsed currenttransmitters• Measure temperature from anRTD probe• Simulate RTD output• Operates with seven types of RTD• Measure additional RTDs usingohms measurement function• Simulate additional RTDs usingohms source function• °F or °C selectable• 25 % stepping, auto-step andauto-ramp• Ramp and Step Ramp outputfunctionsSpecialty modelFluke 724 TemperatureCalibrator• Source/measureTCs, RTDs, voltsand ohms• Measure mAwhile supplyingloop power• 25 % and 100 %stepping, autostepand autorampResourcesInformation for the classroom atwww.fluke.com/educationRecommended accessoriesSpecificationsTL75 (712/724) TL220 (712/724)Hard PointSureGrip IndustrialTest Lead SetTest Lead SetSee page 57 See page 55Models Functions Range Resolution Accuracy NotesFluke 712Pt; 100 200 500Measure/simulate RTD-200 °C to 800 °C0.2 °C, 0.4 °F 1000 (385); Pt 1000.1 °C, 0.1 °F(Pt 100-385)(Pt 100-385) (392); Pt 100 (392) JIS;Ni 120 (672)Fluke 714Measure/simulateresistanceMeasure/simulatethermocouple5 to 4000 0.1 0.025 %-200 °C to 1800 °C,depending on type(K, -200 °C to1370 °C)0.1 °C or °F(1 °C or °F; BRS)0.5 °C, 0.8 °F(Type K)Measure/simulate mV -10 mV to 75 mV 0.01 mV 0.015 % +10 µV9 TC types; J K T E RS B per NIST 175 andITS-90 L U per DIN43710 and PTS-6880PK-24 (714/724) 80PK-3A (712/724)SureGrip AirSurface ProbeTemperature Probe See page 58See page 58Maximum voltage: 30 V. Non-operating temperature: -40 °C to 60 °C. Operating temperature: -10 °C to 55 °C.Relative humidity: 95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C).Operating altitude: 3,000 m max. Shock: 1 m drop test. Vibration: Random, 2 g, 5-500 Hz.Safety: CSA C22.2 No. 1010.1:1992. EMC: EN50082-1:1992 and EN55022:1994 Class B.Size/weight (HxWxD) (712-717): 187 mm x 87 mm x 32 mm (7.35 in x 3.41 in x 1.25 in) 330 g (12 oz).Size/weight (HxWxD) (712-717 with holster): 201 mm x 98 mm x 52 mm (7.93 in x 3.86 in x 2.06 in) 600 g (21 oz).Size/weight (HxWxD) (718): 210 mm x 83 mm x 62 mm (8.25 in x 3.27 in x 2.44 in) 737 g (26 oz).Size/weight (HxWxD) (718 with holster): 216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in) 992 g (35 oz).Power: 9 V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718 .Battery life: 4 to 20 hours, typical, depending on functions used.Warranty: Three-year (one-year on pressure pump in Fluke 718).TPAKAC220Magnetic Meter Hanger SureGrip Alligator ClipsSee page 62 See page 57Ordering informationIncluded accessoriesTest leads, test clips, one pair of stackable test leads, product overviewmanual, users manual in 14 languages on CD.Test leads, alligator clips (excluding model 714), holster with test leadstorage, single 9 V alkaline battery and instruction sheet (14 languages).ModelsFLUKE-724FLUKE-714FLUKE-712Temperature CalibratorThemocouple CalibratorRTD CalibratorC101 (724) C25 (712/714)Meter Hard CaseLarge Soft CaseSee page 54 See page 54Check price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/tempcalProcess Calibration Tools37

Fluke 717, 718 and 719 Pressure CalibratorsAccurate and rugged, temperature calibration toolsPressureEnabledFluke 719SpecificationsFluke 719 Electric Pressure Calibrators• Electric pump enables one handed pressure pumping andmakes pressure calibration quicker and easier• Best in class 0.025 % pressure measurement accuracy• Programmable pump limit settings can eliminate overpressurization—set‘pump to’ pressure values• Two ranges, 30 PSI and 100 PSIFluke 718 Pressure Calibrators• 1, 30, 100 and 300 PSI ranges available• Pump to 300 PSI, 20 bar with internalpump (718-300G)• 718-1G includes special low volumepump and high measurement resolutionfor low pressure calibrationFluke 717 Pressure Calibrators• Measure up to 5000 PSI/345 bar sensor(5000G model)• Compatible with non-corrosive gasesand liquids718 and 719• Precision vernier for fine pressureadjustment• Variable release rate bleed valve forcontrolled pressure release717, 718 and 719 commonfeatures• Pressure switch test makes a difficulttask easy, captures set, reset and deadbandvalues of a pressure switch• 717 and 718, measure pressure to0.05 % of full scale with internal sensor• Measure mA with 0.015 % accuracyand 0.001 mA resolution, while sourcing24 V loop powerFluke 718Fluke 717Specialty modelFluke 700 Series Pressure Modules• 29 pressure modules• 8 intrinsically safepressure modules*• Ranges from1.000 in H 2 0(0.2491 kPa)to 10,000 psi(68.948 MPa)• Gage, differential,dual (compound),absolute, andvacuum modules• Rugged cases protect the modulesfrom harsh environments• Full-accuracy performance from0 °C to 50 °C*For use with 718Ex and 725Ex only(see page 39 for more information).PressureEnabledResourcesFluke Process Calibrators in this catalogdisplaying the Pressure Enabledsymbol display readings from the700 Series Pressure Modules.More info online atwww.fluke.com/processtoolsCheck out the 719 video atwww.fluke.com/719videoModels Range Resolution Comment717-1 +/- 1 psi, 27.5 in H 2 0, +0.0001 psi, 0.0001 kPa, Fluke-718 dry air only and includes on board718-1G717-30G(-7 - +7 kPa)0.0001 in H 2 0pump-12 to + 30 psi,0.001 psi, 0.001 kPa, 0.001 Fluke-718 and Fluke-719 dry air only and718-30G* and (-83 to 207 kPa)in H 2 0includes on board pump719-30G717-100G -12 to + 100 psi,Fluke-718 and Fluke-719 dry air only and0.01 psi, 0.01 kPa, 0.01 in H(-83 to 690 kPa)2 0718-100G*includes on board pump717-300G718-300G* and719-100G-12 to +300 psi,(-83 to +2070 kPa)Ordering information0.01 psi, 0.01 kPa, 0.01 in H 2 0Fluke-718 dry air only and includes on boardpump717-500G 0-500 psi, 0-3450 kPa 0.01 psi, 0.1 kPa Compatible with non-corrosive gases and fluids717-1000G 0-1000 psi, 0-6900 kPa 0.01 psi, 0.1 kPa Compatible with non-corrosive gases and fluids717-1500G 0-1500 psi, 0-10342 kPa 0.1 psi, 1 kPa Compatible with non-corrosive gases and fluids717-3000G 0-3000 psi, 0-20700 kPa 0.1 psi, 1 kPa Compatible with non-corrosive gases and fluids717-5000G 0-5000 psi, 0-34500 kPa 0.1 psi, 1 kPa Compatible with non-corrosive gases and fluidsPressure accuracy 0.05 % of range, one year for 717 and 718. 0.025 % for six months, 0.035 % of range, one year for the 719mA measurement 0-24 mA range 0.001 mA resolution Accuracy: ± 0.015 % + 1 countLoop power 24 V dc Accuracy: ± 10 %*Intrinsically safe models available, see page 39.Warranty: Three-year on calibrator, one-year on pump.Included accessories ModelsTest leads, alligator FLUKE-719-30G Electric Pressure Calibrator FLUKE-719-100G Electric Pressure Calibratorclips, holster, test hose(719), one 9 V alkalineFLUKE-718 1G Pressure Calibrator FLUKE-718 30US Pressure Calibratorbattery (two 9 V batteriesFLUKE-718 100US Pressure Calibrator FLUKE-718 300G Pressure Calibratorin 718 and 719), FLUKE-717 1G Pressure Calibrator FLUKE-717 30G Pressure Calibratorsafety sheet.FLUKE-717 100G Pressure Calibrator FLUKE-717 300G Pressure CalibratorFLUKE-717 500G Pressure Calibrator FLUKE-717 1000G Pressure CalibratorFLUKE-717 1500G Pressure Calibrator FLUKE-717 3000G Pressure CalibratorFLUKE-717 5000G Pressure CalibratorFor a full list of Fluke 700 Pressure Modules, visit www.fluke.com/pressure.Recommended kits700ILFIn-Line FilterSee page 59700LTP-1Low PressureTest PumpSee page 59700HTP-1C116Hydraulic Test PumpLarge Soft CaseSee page 59 See page 54Check price and availability atwww.fluke.com/wtb38Process Calibration ToolsFor more information, go to www.fluke.com/pressure

Intrinsically Safe ProductsCalibrators, thermometers and multimetersdesigned to intrinsic safety standardsWhat is “Intrinsically Safe”?Intrinsic safety is a protection method employed in potentially explosive atmospheres.Devices that are certified as “intrinsically safe” are designed to be unable to releasesufficient energy, by either thermal or electrical means, to cause ignition of flammablematerial (gas or dust/particulates).There are no global intrinsically safe standards or certifications, but there are organizationsthat influence directives in certain world geographies.Fluke products87V Ex: IntrinsicallySafe True-rms MultimeterFactory Mutual – In the United States, Factory Mutual Research,managed by Factory Mutual (FM) Global, is a non-profit scientific andtesting organization that has tested and certified over 40,000 productsin the last 165 years. FM Research has set certification guidelines forequipment used in potentially explosive atmospheres.Canadian Standards Association (CSA) – Accreditation body forNorth American regulations, based in Toronto, Canada.ATEX – The primary intrinsically safe standard, which has been setin the European Union with the Directive 94/9/EC, commonly calledATEX (“Atmosphères Explosibles”), French for explosive atmospheres.For more information and detailed specifications, turn to the correspondingnon-intrinsically safe product pages (Fluke 707, 718, 725,574, 68) or go to www.fluke.com/ex.707Ex: IntrinsicallySafe mA Calibrator718Ex: IntrinsicallySafe Pressure CalibratorATEX certifiedNorth AmericanCertificationFor additionalproduct detailII 2 G Ex ia IIC T4 See page 12II 2 G Ex ia IIC T4 N.I. Class I, Div 2,Groups A-D T4See page 34Specialty modelsFluke 68IS Intrinsically SafeInfrared Thermometer• Laser guided sightingsystem with 1 % accuracy• 12-point data logging• Advanced optics• Adjustable emissivity• Selectable Max/Min/Dif/Avgfunctions that display valuesinstantly with Hi/Lo Alarm• Expanded measurementrange up to 760 °C (1400 °F)• RTD probe accessory included• Class I, Division 1, Groups A,B, C, D Class I, Zone 0, AEx ia IIC,T4 at 50 °C when used with 9 Valkaline batteryNot available for purchase in Europe.574-NINonincendiveThermometerFor data loadingand extra safetythe Fluke 574Nonincendive (NI)Thermometer hasthe same great features as the 574model thermometer with the extra confidenceof a Factory Mutual approvalfor use in hazardous environments.Class I, Division 2, Groups A, B, C, D: Class I, Zone 2 IIC;T4 Ta=50 °C when used with 1.5 V alkaline batteries.725Ex: Intrinsically SafeMultifunction CalibratorII 1 G Ex ia IIC T4Groups A-D T4See page 38ResourcesMore info online atwww.fluke.com/processtoolsII 1 G Ex ia IIB 171 °CGroups B-D, 171 °CSee page 36Take a look at all the intrinsically safemodels at www.fluke.com/insafety700PEx: IntrinsicallySafe Pressure ModulesII 1 G Ex ia IIC T4 I.S. Class I, Div 1,Groups A-D T4See page 38Fluke 574-NI NonincendiveInfrared ThermometerClass I, Division 2,Groups A, B, C, D;Class I, Zone 2 IICSee page 50All the information you need atwww.fluke.com/processsolutionsFluke 68IS Intrinsically SafeInfrared ThermometerClass I, Division 1,Groups A, B, C, DClass I, Zone 0 AExia IICOrdering informationModelsModelsFLUKE-87VEx IS True-rms Multimeter FLUKE-707Ex IS Loop CalibratorFLUKE-718Ex IS Pressure Calibrator FLUKE-725Ex IS Multifuction Process CalibratorFLUKE-700PEx Pressure Modules (700P: 01, 5, 6, 9, 24, 27,29, A4Ex)FLUKE-574-NI Precision Infrared Thermometer w/Logging SWNonincendiveFLUKE-68IS Infrared Thermometer Intrinsically SafeCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/exProcess Calibration Tools39

Fluke ScopeMeter ® Test ToolsHandheld oscilloscopes for industrial,instrumentation and electronic applicationsTMFluke 225CScopeMeter test tools are the rugged, safe choice for a widevariety of field service installation and maintenance applications.These handheld battery-powered oscilloscopes tools are easy touse, with a built-in multimeter, paperless recording and analysiscapabilities. They are rugged and IP 51 dust- and drip-proof ratedto IEC529 standards to withstand harsh environments.The new 190 Series II, four isolated input channels and100 MHz or 200 MHz bandwidth are ideal for industrial machineryapplications measuring three-phase power electronics orthree-axis control systems comparing and contrasting multiplesignals simultaneously. These tools are safety, rated at CAT III1000 V/ CAT IV 600 V with longer battery life and up-to-dateUSB interface technology.Fluke 199C Fluke 124The 190C Series, with two isolated inputs and 60 MHz,100 MHz or 200 MHz bandwidth, is the choice for industrialelectronic applications like automation and process control. Theseoscilloscopes are rated for CAT II 1000 V/ CAT III 600 V environmentsand will operate for up to four hours without a recharge.The 120 series with 20 MHz or 40 MHz bandwidth, dual DMMsand paperless recording is the optimal choice for electrical andelectro-mechanical applications, safety rated to IEC EN61010-1CAT III 600 V.For Industrial network applications, Fluke 125, 215C or 225Cadd industrial network physical layer analog measurement algorithmsto validate the network bus health.Selection guide120 Series 190C Series 190 Series II123 124 125 215C 225C 192C 196C 199C 190-104 190-204Bandwidth20 MHz •40 MHz • •60 MHz •100 MHz • • •200 MHz • • •Input channels2Ch + 2 DMM • • •2Ch + DMM • • • • •4Ch • •Isolated inputs • • • • • • •TriggeringConnect-and-View • • • • • • • • • •Advanced triggering • • • • • • •Advanced measurement functionCursors • • • • • • • • •TrendPlot • • • • • • • • • •ScopeRecord • • • • • • •100 screen replay • • • • • • •Industrial bus health • • •Harmonics •FFT • • • • • • •Power measurements • • • • • • • •Waveform mathematics • • • • • • • •EN61010-1 safetyCAT II 1000 V • • • • • • •CAT III 600 V • • • • • • • • • •CAT III 1000 V • • • • • • •CAT IV 600 V • •InterfaceOptical RS-232 • • • • • • • •USB PC interface Opt Opt Opt Opt Opt Opt Opt Opt • •USB memory port • •PowerNi-MH • • • • • • • •Li-Ion • •Battery (hours) 7 7 7 4 4 4 4 4 7 7General specificationsSize (HxWxD) 9.2 in x 4.5 in x 2 in 10.1 in x 6.7 in x 2.5 in 10.5 in x 7.5 in x 2.8 inWeight 2.6 lb 4.4 lb 4.8 lb40 ScopeMeter Test ToolsFor more information, go to www.fluke.com/scopemeter

Fluke 123 and 124ScopeMeter ® Test ToolsConnect-and-View triggering for aninstant, stable displayScope users know how difficult triggeringcan be. Incorrect settings show unstable andsometimes incorrect results. Fluke’s uniqueConnect-and-View recognizes signal patternsand automatically and continuously sets upcorrect triggering. It provides a stable, reliableand repeatable display of virtually any signal.Three-in-one simplicityThe compact ScopeMeter 123 and 124 arethe rugged solution for industrial troubleshootingand installation applications.Each is a truly integrated test tool, withoscilloscope, multimeter and “paperless”recorder in one affordable, easy-to-useinstrument. Find fast answers to problemsin machinery, instrumentation, controland power systems.• Dual-input 40 MHz or 20 MHz digitaloscilloscope• Two 5,000-count true-rms digitalmultimeters• A dual-input TrendPlot recorder• Connect-and-View trigger simplicityfor hands-off operation• Shielded test leads for oscilloscope,resistance and continuitymeasurements• Up to seven hours battery operation• CAT III 600 V safety certified• Optically isolated RS-232 interface• IP 51 rated, rugged compact caseResourcesImprove your troubleshootingskills, Fluke can help!Visit the ScopeMeter Training Center:www.fluke.com/ScopeMeterTrainingCenterRecommended kitsSCC 120 Kit• Software• Cable• Hard carrying caseUse TrendPlot to help find intermittentsThe toughest faults to find are those thathappen only once in a while—intermittents.They can be caused by bad connections, dust,dirt, corrosion or simply broken wiring or connectors.Other factors, like line outages andsags, can also cause a machine to stop. Youmay not be around to see it—your Fluke Scope-Meter will. In this “paperless recorder” mode,you can plot the minimum and maximum peakvalues and average over time—up to 16 days.Connect-and-View captures even the mostcomplex motor drive signals.SCC 190 Kit• Software• Cable• Hard carrying caseRecommended accessoriesBattery powered mobilityUp to seven hours of battery operation freesyou from mains outlets for true on-the-moveworking. The rugged and drip proof caseassures long life and reliable operation in theharshest industrial environments.PAC91Printer Adapter Cablei30sAC/DC Current ClampSee page 61Safety ratedThe ScopeMeter 123 and 124 are safetyrated for measurements on CAT III 600 V rmsindustrial power systems with the includedtest leads.Use TrendPlot to help find intermittents, fast.C125C195Soft Carrying CaseTool BagSee page 54 See page 54Ordering informationIncluded accessoriesTest lead set, alligator clips, hook clips, battery pack, batterycharger/line voltage adapter, BNC adapter, getting startedguide, users manual on CD.Test lead set, alligator clips, hook clips, battery pack, batterycharger/line voltage adapter, BNC adapter, OC4USB opticallyisolated RS-232 adapter/cable, FlukeView for ScopeMeterWindows® software, hard carrying case, getting startedguide, users manual on CD.ModelsFLUKE-124SFLUKE-124FLUKE-123SFLUKE-123SCC120Industrial ScopeMeter, 40 MHz, with SCC120 kitIndustrial ScopeMeter, 40 MHzIndustrial ScopeMeter, 20 MHz, with SCC120 kitIndustrial ScopeMeter, 20 MHzKit containing FlukeView software for Windows,USB interface adapter/cable and hard caseCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/scopemeterScopeMeter Test Tools41

Fluke 190 Series II ScopeMeter ® Test ToolsSee more, fix more, in harsh industrial environmentsFluke 199CFluke 190-204Goes where ordinary scopes can’t goSafety rated for industrial applications, the 190Series ScopeMeter combines rugged portabilitywith high performance to take you all the wayfrom troubleshooting microelectronics to powerelectronic applications.The first high-performance four-channel scopesbuilt for harsh industrial environmentsFor the first time, plant maintenance engineers andtechnicians can take a high-performance fourchannelscope into the harsh world of industrialelectronics. The new Fluke 190 Series II is theonly portable oscilloscope with four independentisolated input channels, a CAT III 1000 V/CATIV 600 V safety rating, and an IP 51 dust-proofand drip-proof rating. Both the 200 MHz (Fluke190-204) and 100 MHz (Fluke 190-104) bandwidthmodels offer these capabilities:• 4 independent isolated inputs, up to 1000 V• High-speed sampling: Up to 2.5 GS/sec• Deep memory: 10,000 points per trace waveformcapture• CAT III 1000 V/CAT IV 600 V safety rated forhigh voltage environments• Up to 7 hours of battery operation, standard• Isolated USB host port for direct data storage to aUSB memory• Device, plus USB device port for easy PCcommunication• Easy-access battery door for quick battery swapsin the field• Compact and only 2.2 kg (4.8 lb)• Security slot: lock down oscilloscope withKensington lock while unattendedSample screensConnect-and-View captures even the most complexmotor drive signals.Use the 27,000 points memory of ScopeRecord andzoom in for maximum detail.Automatic capture and replay of100 screensScope users know how frustrating it is tosee a one-time anomaly flash by—neverto be seen again. Not with the ScopeMeter190 series. Now you can look back intime with a touch of the replay button. Innormal use, the instrument continuouslymemorizes the last 100 screens, on a firstin-first out basis. At any moment you can“freeze” the last 100 screens and scrollthrough picture-by-picture or replay as a“live” animation. Cursors can be used forfurther analysis.ScopeRecord mode for high-resolutionwaveform recording up to 48 hoursScopeRecord memory stores up to 27,000data points per channel, capturing fastintermittents and glitches as short as 8ns.• Stores events like motion profiles, UPS,power supply and motor start-ups• In Stop On Trigger mode, ScopeMeterautomatically recognizes a power failureand stores the waveform data• With the waveform zoom (up to 100x)you can look at the smallest details, likeindividual power cyclesTrendPlot Paperless RecorderThe toughest faults to find are those thathappen once in a while. These intermittentscan be caused by bad connects,dust, dirt, corrosion, or simple brokenwiring or connectors. Line outages, sagsor starting and stopping of a motor canalso cause a machine to stop. You may notbe around when it happens, but the FlukeScopeMeter will.• Plot minimum and maximum plot valuesand average over time up to 16 days• Plot any combination of voltages, amps,temperature, frequency and phase forall four inputs, all with time and datestamp to pinpoint faultsCursors and zoom features of the Fluke 190 Series helpyou to analyze the captured TrendPlot.ResourcesGo to www.fluke.com/fourchannelscopemeterfor interactive trouble-shooting demonstrations.Ordering informationIncluded accessoriesTest lead set, voltage probes(200 MHz, 10:1)-red and gray,battery charger/line voltageadapter, battery pack, gettingstarted guide, users manualon CD.ModelsFLUKE-190-204FLUKE-190-204SFLUKE-190-104FLUKE-190-104SFLUKE-199CFLUKE-199C/SFLUKE-196CFLUKE-196C/SFLUKE-192CFLUKE-192C/SColor ScopeMeter (200 MHz, 2.5 GS/s, 4 channel)Color ScopeMeter (200 MHz , 2.5 GS/s, 4 channel), with SCC290-kitColor ScopeMeter (100 MHz, 1.25 GS/s, 4 channel)Color ScopeMeter (100 MHz, 1.25 GS/s, 4 channel), with SCC290-kitColor ScopeMeter (200 MHz, 2.5 GS/s)Color ScopeMeter (200 MHz, 2.5 GS/s) + SCC190Color ScopeMeter (100 MHz, 1 GS/s)Color ScopeMeter (100 MHz, 1 GS/s) + SCC190Color ScopeMeter (60 MHz, 500 MS/s)Color ScopeMeter (60 MHz, 500 MS/s) + SCC190 kitCheck price and availability atwww.fluke.com/wtb42ScopeMeter Test ToolsFor more information, go to www.fluke.com/scopemeter

Fluke 225C, 215C and 125ScopeMeter ® Test Toolshe Fluke 225C, 215C and 125re the instruments of choice formaintenance specialists who dealwith industrial buses and networkss well as general electronics. Youan verify the electrical integrityf your bus and network physicalayer, performing tests and gettingnswers to digital signalling issuesuickly and easily.These instruments offer allhe functions found in the 120 or90C Series, plus added measurementcapabilities for industrialnetworks such as Profi®, Foundaion,Modbus®, CAN-bus, AS-i bus,RS-485 and more.Bus Health physical layer appliationmeasures critical digitalignal amplitude, time and noiser distortion characteristics. Finderrors like signal attenuation and distortion caused by improper cable connections, badcontacts, incorrect grounding, and missing or superfluous terminators. Signal integrityanalysis is extended with the eye-pattern mode. A waveform display is built oversuccessive signal passes to give you a visual indication of overall signal quality, noiselevels, and signal jitter.• Critical bus physical layer amplitude, time andnoise or distortion measurements• Compare measurement results to limits defined bythe industry standard• Display clear “good”, “weak” or “bad” indicators.• Eye pattern mode to visually inspect waveformsquality of transmitted data packets• 215C or 225C with isolated inputs perform floatingdifferential measurements on balanced two wirebus systems• 125 dual input measurements performed relative tocommon reference point• BHT190 breakout adapter set DB9, RJ45 and M12simplify probing onto bus signal connectorsSpecificationsFluke 225C(200 MHz 199C)Fluke 215C(100 MHz 196C)••Fluke 125(40 MHz 124)Dual isolated inputs for differential bus system probingOn screen bus system probe connection diagramsBus Health AS-i • •PhysicalLayerCAN-bus (ISO-11898) (DeviceNet) • •Standards Interbus S (EIA-485)•ControlNet (61158 type 2)•Modbus (EIA-232, EIA-485) • •Foundation Fieldbus H1 (61158 type 1) • •Profibus DP (EIA-485), PA (61158 type 1) • •Ethernet 10Base2 (coax), 10BaseT (UTP) • •Ethernet 100BaseT (100 Mb/s)•RS-232 (EIA-232), RS-485 (EIA-485) • •Measured parametersBias Voltage Level, signal amplitude,pulse width or baud rate, rise/ fall time, jitter,signal distortion, noise HF, noise LF, in-bandnoiseBaud rate, rise/falltime, high level,low level, distortion,amplitude, jitterEye diagram “qualitative” waveform analysis•BusHealth breakout adapter set BHT190 included BHT190 optionalSample screensMeasure critical signal characteristics, compare toindustry standard.Use “eye” diagrams to inspect for issues like signalnoise, distortion and other common disturbances.Recommended accessoriesBHT190Bus Health Test Adapter,DB-9 and M-12i410AC/DCCurrent ClampSee page 61i30SAC/DCCurrent ClampSee page 61ResourcesGo to www.fluke.com/scopemeterfaqsfor answers to frequently askedquestions.Ordering informationIncluded accessories ModelsTest lead set, battery FLUKE-225C/003charger/line voltageFLUKE-225C/003Sadapter, battery pack(installed), gettingstarted guide, multilingualusers manual FLUKE-215C/003SFLUKE-215C/003on CD.FLUKE-125FLUKE-125SColor ScopeMeter (200 MHz, 2.5 GS/s) with Bus Health test capabilities built-inColor ScopeMeter (200 MHz, 2.5 GS/s) with Bus Health test capabilities built-in,with SCC190 kitColor ScopeMeter (100 MHz, 1 GS/s) with Bus Health test capabilities built-inColor ScopeMeter (100 MHz, 1 GS/s) with Bus Health test capabilities built-in, withSCC-kitIndustrial ScopeMeter, Bus Health, Power & HarmonicsIndustrial ScopeMeter, Bus Health, Power and Harmonics with SCC-KitCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/scopemeterScopeMeter Test Tools43

Fluke Thermal ImagingFind it, fix it, fastSuperior image qualityJust pick up a Fluke imager and you’ll immediately see the difference.Fluke delivers the clear, crisp images needed to find and fixproblems fast.• Industry leading thermal sensitivity (NETD) enables you toidentify the small temperature differences that could indicatebig problems• Even the smallest details become visible with the large, widescreenfull VGA color LCD display• Patented IR-Fusion®Easy to useWhen you pick up a tool, you need it to operate and deliver resultswithout having to read a heavy manual• Intuitive, three-button menu is easy to use… simply navigatewith the push of a thumb• Add comments quickly and easily with voice annotation featurefor precise image viewing controlRuggedTools are meant to be used, andFluke thermal imagers are designedto reliably operate in the toughestenvironments.• Engineered and tested towithstand a 2 m (6.5 ft) drop—when was the last time youdropped a tool? See the proof atwww.fluke.com/rugged• Use in ambient temperatures as low as -10 °C (14 °F) and high as +50 °C (122 °F)• Protected by two-year warranty, with one- or two-year extended warranties availableAsk your Fluke representative for more details.IR-Fusion ®IR-Fusion viewing modesTechnologyNot all fusion is created equalInfrared images alone can be difficult tounderstand, which is why Fluke pioneeredIR-Fusion, a revolutionary marriage of visibleand infrared images never before seenin commercial or industrial thermal imagers.Automatically capturing a visible image withevery infrared image allows you to alwaysknow exactly what you’re looking at.Don’t be fooled by imitators. PatentedIR-Fusion is the only solution with physicalparallax correction, enabling the perfectalignment and smooth blending of bothinfrared and visible images. While manymanufacturers have attempted to duplicateFluke IR-Fusion, none have been able tomatch it. Turn to Fluke IR-Fusion to deliverthe industry’s best thermal images.Application tipsElectric motorsand pumpsHot spots maybe an early indicatorof motorwinding problems.Elevatedtemperaturescan damagewinding insulation,resultingin operationalinefficienciesand prematuremotor failure. Anoverheated motor may be an indicationof an underrated motor in theapplication, insufficient cooling orelectrical power problems.Bus bars andfuse boxesTemperaturedifferencesbetween phasesmay indicateunbalancedloads, harmonics,componentproblems, badconnectionsor bad wiring.These conditionscan resultin increasedenergy cost and can damage cablesor machines or possibly cause fire.Even small temperature differencesbetween phases should be investigatedto determine the root cause.Residential andcommercialenergy lossMissing orimproperlyinstalled insulation,moisture,and air leaksreveal opportunitiesforproperty ownersto lower theirenergy costs.Save time andmoney by finding problems fast andensuring repairs are done correctly.Full IRAlpha BlendingFull Visible LightResourcesTo request more information,or a demonstration, or to order,call 1-800-760-4523 (U.S. only),all other regions 1-425-446-4620.Picture in PictureIR/Visible AlarmCheck price and availability atwww.fluke.com/wtb44Thermal ImagingFor more information, go to www.fluke.com/thermal_imaging

Fluke SmartView ® SoftwareAnalysis and reporting softwarePalette samplesFluke palette options (six of16 available, varies by model)AmberPowerfulEverything you need for analysis andreporting.• Extensive annotation, editing andviewing options with full IR-Fusion®capabilities• Multiple reporting options and templatesand 3D-IR for unique 3D analysisEasy to use• SmartView tools and controls allow easyaccess to editing functions and its easydrag and drop text annotation feature• Report Wizard guides you through automatic,professional report generationIncluded with every imagerFluke includes SmartView software withunlimited licenses and lifetime upgradeswith every thermal imager• No need to pay extra for a professionalsoftware solutionSmartView® systemrequirementsSoftware requirements• Windows® XP SP2/Vista/7• A web browser for product registrationand web updates• Internet Explorer 5.0 or newer• 512 MB of RAM minimum (1 GB for Vistaor 7)• 360 MB of hard disk space for productinstallation• Microsoft® Word 2007 for report templatemodification (optional)Hardware requirements• Memory card reader to transfer imagesto computer (included)• 512 MB RAM (1GB for Vista), not includingthe space requirements for webbrowser and Microsoft® Word• 16-bit color, 1024x768 resolution videoor better• CD-ROM drive for installing SmartViewsoftwareBlue-redGreyFluke Training SolutionsGetting started with Fluke Ti Thermal ImagersUnsure where to begin with your new thermal imager?Don’t worry. Fluke utilizes anextensive network of industryexperts to deliver a full portfolioof training solutions.• Free in-box training DVD:This convenient trainingsolution provides a generalintroduction to thermal imaging,product information, andcommon applications.• Free online webinars: Flukeoffers both pre-recorded andlive webinars to meet the needsof busy professionals. Visitwww.fluke.com/titraining forcourse listings and schedules.• Hands-on training seminars:Join us for one of our many local seminars where Fluke Thermography experts willteach basic thermography with hands-on demonstrations.Go to www.fluke.com/titraining for schedules.• Advanced training: For advanced thermography (Level I toLevel III) and application specific training either online, inthe classroom or at your site, sign up through Fluke authorized,independent training partners. Visit www.fluke.com/titraining for training options and schedules.For more information, go to www.fluke.com/thermal_imagingFluke authorized trainingis provided by our partner,High contrastIronbowHot metalCheck price and availability atwww.fluke.com/wtbThermal Imaging45

Ti Series Industrial Thermal ImagersThe ultimate tools for troubleshooting and maintenanceoptional telephoto lensThe perfect tools to add to your problem solving arsenal. Builtfor tough work environments, these high-performance, fullyradiometric imagers are ideal for troubleshooting electrical systems,electro-mechanical equipment, process equipment, HVAC/Requipment and others.• Enhanced problem detection and analysis capabilities withpatent-pending IR-Fusion® Technology—only available fromFluke• Optimized for field use in harsh work environments– Engineered and tested to withstand a 2 m (6.5 ft) drop– Withstands dust and water—tested to an IP 54 rating– Innovative protective lens cover protects the lens whennot in use• Delivers the clear, crisp images needed to find problems fast– Identify even small temperature differences that couldindicate problems with excellent thermal sensitivity (NETD)– Even the smallest details become visible with the large,widescreen full color LCD display• Intuitive, three-button menu is easy to use... simply navigatewith the push of a thumbSee page 44 for IR-Fusion Technology—only available from Fluke.See page 48 for recommended accessories.Specialty modelsFind problems faster withFluke thermal imagers.Turn to the high performance FlukeFlexCam® line when you need a5 inch high-contrast LCD and superioron-imager analysis capabilities.Images stored on a 1 GB compactflash card can be downloaded to acomputer with included USB cable orcard reader. Offers video out for livesharing of thermal images. Additionallenses are available. Flukeputs powerful technology withinyour reach.SpecificationsFeatures TI32 TI25 Ti10Temperature measurement range(not calibrated below -10 °C)-20 °C to +600 °C(-4 °F to + 1112 °F)-20 °C to +350 °C(-4 °F to + 662 °F)-20 °C to +250 °C(-4 °F to + 482 °F)Temperature measurement accuracy± 5 °C or 5 % (at 25 °C nominal,± 2 °C or 2 % (at 25 °C nominal, whichever is greater)whichever is greater)On-screen emissivity correctionYesOn-screen reflected backgroundtemperature compensationYesOn-screen transmission correctionYesImage capture frequency60 Hz or 9 Hz refresh rate depending on modelDetector type320 X 240 Focal Plane Array,uncooled microbolometer160 X 120 Focal Plane Array, uncooledThermal sensitivity (NETD)≤ 0.05 °C at 30 °C target temp.(50 mK)≤ 0.1 °C at 30 °C target temp.(100 mK)≤ 0.2 °C at 30 °C target temp.(200 mK)Field of view (standard lens)Field of View: 23 ° x 17 °; Minimum Focus Distance: 15 cm (approx. 6 in)Spatial resolution (IFOV) 1.25 mRad 2.5 mRadOptional telephoto infrared lensYesOptional wide-angle infrared lensYesStandard palettesIronbow, Blue-Red, High Contrast,Ironbow, blue-red, high contrast, Ironbow, blue-red, high contrast,Amber, Amber Inverted, Hot Metal,amber, hot metal, greygreyGrayscale, Grayscale InvertedUltra contrast palettesIronbow Ultra, Blue-Red Ultra,High Contrast Ultra, Amber Ultra,Amber Inverted Ultra, Hot MetalUltra, Grayscale Ultra, GrayscaleInverted UltraIR Fusion®YesColor alarms (user selectable)High-temperature alarmVoice annotation60 seconds maximum recording time per image; reviewable playbackon imagerStorage mediumSD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visualimages each with 60 seconds voice annotations, or 3000 basic bitmap (.bmp) images, or 3000 jpeg (.jpeg)images; transferrable to PC via included multi-format USB card readerExport file formats w/includedSmartView® SoftwareBMP, DIP, GIF, JFIF, JPE, JPEG, JPG, PNG, TIF, and TIFFBatteriesAC battery chargingTwo Lithium Ion rechargeablesmart battery packs with 5-segmentLED Display to show chargelevel. Battery life: 4+ hours;Battery charge: 2.5 hours to fullchargeTwo-bay AC battery charger(110 V ac to 220 Vac, 50/60 Hz)(included), or in-imager charging,ac mains adapters includedInternal rechargeable battery pack (included)Battery life: 3-4 hoursBattery charge: 2.5 hours to full chargeAC adapter/charger (110 V ac to 220 V ac, 50/60 Hz) (included),charges battery while imager is operating or turned off, ac mainsadapters includedAC operationAC operation with included power supply (110 V ac to 220 V ac, 50/60 Hz), ac mains adapters includedEnclosure ratingIP54Drop tested2 m (6.5 ft)WarrantyTwo-yearTo download detailed specifications for these products go to www.fluke.com/tispecsResourcesHands-on training, Webinars, virtualdemos and more.www.fluke.com/titrainingThis tool will help determine thereturn on investment of a FlukeThermal Imager.www.fluke.com/roiOrdering informationIncluded accessoriesIn-box training DVD, SmartView® analysis and reporting software, 2 GBSD memory card, multi-function memory card reader, hard carry case,soft carry case, hand strap, two external smart rechargeable batteries, accharger/power supply.**Included accessories vary by model.AC adapter, video cable, 1 GB compact flash card, compact flash cardreader and USB cable, PCMCIA compact flash card adapter, SmartViewreporting and analysis software, two rechargeable battery packs, batterycharger, neck strap, heavy duty carrying case and users manual on CD.ModelsFLK-Ti25 9HZFLK-Ti10 9HZFLK-Ti32 9HZFLK-Ti32 60HZFLK-Ti40FT-20FLK-Ti45FT-20FLK-Ti50FT-20FLK-Ti55FT-20Thermal ImagerThermal ImagerIndustrial-Commercial Thermal ImagerIndustrial-Commercial Thermal ImagerIR FlexCam Thermal ImagerIR FlexCam Thermal ImagerIR FlexCam Thermal ImagerIR FlexCam Thermal ImagerCheck price and availability atwww.fluke.com/wtb46Thermal ImagingFor more information, go to www.fluke.com/thermal_imaging

Ti Series Buildings Thermal ImagersOptimized for energy audits and moisture detectionTiR32 shown withoptional wide angle lensThe ultimate tools for energy audits, building maintenance, restoationand remediation.• Enhanced problem detection and analysis capabilities withpatent-pending IR-Fusion® Technology—only available from Fluke• Optimized for field use– Engineered and tested to withstand a 2 m (6.5 ft) drop– Withstands dust and water—tested to an IP 54 rating– Innovative protective lens cover protects the lens whennot in use• Delivers the clear, crisp images needed to find problems fast– Identify even small temperature differences that couldindicate problems with excellent thermal sensitivity (NETD)– Even the smallest details become visible with the large,widescreen full color LCD display• Intuitive, three-button menu is easy to use... simply navigatewith the push of a thumbee page 44 for IR-Fusion Technology—only available from Fluke.See page 48 for recommended accessories.Specialty modelsFlexCam® Thermal ImagersThe experts’ choice forbuilding diagnosticsThe Fluke TiR3FT and TiR4FT ThermalImagers are for professionals demandingthe best and most thoroughsolutions in building diagnostics applications.The Fluke TiR-Series providesthe industry’s largest LCD to viewon-camera images, augmented withthe innovative IR-Fusion® Technologyto better pinpoint building problems.IR-Fusion is the overlay of IR and visibleimages, allowing one to clearlyidentify critical points within thethermal image.SpecificationsFeatures TIR32 TIR1 TiRTemperature measurement range-20 °C to +150°C(not calibrated below -10 °C)(-4 °F to + 302 °F)-20 °C to +100 °C (-4 °F to + 212 °F)Temperature measurement accuracy± 5 °C or 5 % (at 25°C nominal,± 2 °C or 2 % (at 25°C nominal, whichever is greater)whichever is greater)On-screen emissivity correctionYesOn-screen reflected backgroundtemperature compensationYesOn-screen transmission correctionYesImage capture frequency 60 Hz or 9 Hz refresh rate depending on modelDetector type320 X 240 Focal Plane Array,uncooled microbolometer160 X 120 Focal Plane Array, uncooledThermal sensitivity (NETD)≤ 0.05 °C at 30 °C target temp.(50 mK)≤ 0.07 °C at 30 °C target temp.(70 mK)≤ 0.1 °C at 30 °C target temp.(100 mK)Field of view (standard lens)Field of view: 23 ° x 17 °; minimum focus distance: 15 cm (approx. 6 in)Spatial resolution (IFOV) 1.25 mRad 2.5 mRadOptional telephoto infrared lensYesOptional wide-angle infrared lensYesStandard palettesIronbow, Blue-Red, High Contrast,Ironbow, blue-red, high contrast, Ironbow, blue-red, high contrast,Amber, Amber Inverted, Hot Metal,amber, hot metal, greygreyGrayscale, Grayscale InvertedUltra contrast palettesIronbow Ultra, Blue-Red Ultra,High Contrast Ultra, Amber Ultra,Amber Inverted Ultra, Hot MetalUltra, Grayscale Ultra, GrayscaleInverted UltraIR Fusion®YesColor alarms (user selectable)Dew point-temperature alarmVoice annotation60 seconds maximum recording time per image;reviewable playback on imagerStorage mediumSD Memory Card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR andlinked visual images each with 60 seconds voice annotations, or 3000 basic bitmap (.bmp) images,or 3000 jpeg (.jpeg) images; transferrable to PC via included multi-format USB card readerExport file formats w/includedSmartView® SoftwareBMP, DIP, GIF, JFIF, JPE, JPEG, JPG, PNG, TIF, and TIFFBatteriesAC battery chargingTwo Lithium Ion rechargeablesmart battery packs with 5-segmentLED Display to show chargelevel. Battery life: 4+ hours;Battery charge: 2.5 hours to fullchargeTwo-bay ac battery charger(110 V ac to 220 V ac, 50/60 Hz)(included), or in-imager charging,ac mains adapters includedInternal rechargeable battery pack (included)Battery life: 3 to 4 hoursBattery charge: 2.5 hours to full chargeAC adapter/charger (110 V ac to 220 V ac, 50/60 Hz) (included),Charges battery while imager is operating or turned off,ac mains adapters includedAC operationAC operation with included power supply (110 V ac to 220 V ac, 50/60 Hz), ac mains adapters includedEnclosure ratingIP54Drop tested2 m (6.5 ft)WarrantyTwo-yearTo download detailed specifications for these products go to www.fluke.com/tispecsFluke TiS BuildingDiagnostics Thermal ImagingScannerThe new Fluke TIS isthe top-performingimager in its priceclass and meets theproposed RESNETinfrared inspectionstandards.• 120 x 120 resolution• Largest display inprice class, 30 %larger than comparablemodels• Award winning design, built ruggedto withstand 2 m (6.5 ft) dropResourcesThermal imaging equipmentsolution centerThese tools can help you find out moreabout thermal imaging whether youcurrently own a thermal imager or areconsidering a purchase.www.fluke.com/tisolutionsOrdering informationIncluded accessoriesIn-box training DVD, SmartView® analysis and reporting software,2 GB SD memory card, multi-function memory card reader, hard carrycase, soft carry case, hand strap, two external rechargeable batteries, accharger/power supply and users manual.**Included accessories vary by model.AC adapter (TiR4FT only), video cable, 1 GB compact flash card, compactflash card reader and USB cable, PCMCIA compact flash adapter,SmartView reporting and analysis software on CD, two rechargeablebattery packs, battery charger, neck strap, heavy duty carrying case andusers manual on CD.ModelsFLK-TiR32 9HZFLK-TiR32 60HZFLK-TIR1 9HZFLK-TIR 9HZFLK-TiR3/FT-20FLK-TiR4/FT-20FLK-TiS 9HZBuilding Diagnostics Thermal ImagerBuilding Diagnostics Thermal ImagerThermal ImagerThermal ImagerIR FlexCam BD Thermal ImagerIR FlexCam BD Thermal ImagerIR BD Thermal ImagerCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/thermal_imagingThermal Imaging47

Thermal imaging resources from FlukeEverything you need to use a Fluke thermal imagerProduct demosIf you currently own a Fluke thermal imageror are considering a purchase, please visitthe Fluke Thermal Imaging Resource site atwww.fluke.com/titools.Learn more about the value of thermalimaging and why Fluke thermal imagersand SmartView® software are the best solutionson the market today.Watch a video, take a virtual demo, andview or download other useful informationand tools.Find the thermal imager that best fitsyour applicationGo to www.fluke.com/select. Use ouronline product selection guide to find outthe best Fluke thermal imager for yourapplication.Recommended accessoriesBOOK-ITPFLK-LENS/TELE1Introduction toTelephoto InfraredThermographyLens (Ti32 andPrinciples BookTiR32 only)FLK-LENS/WIDE1Wide-Angle Infrared Lens(Ti32 and TiR32 only)TI-CAR-CHARGERThermal Imager Car Charger(all models except FlexCam)Building Inspection with a Flukethermal imager—a videoTI-VISORThermal Imager Sun Visor(all models except FlexCam)TI-SBP3Smart Battery Pack(Ti32 and TiR32 only)SmartView software demoSample applicationsTI-SBC2 103232Charging BaseAnti-glare Hood(Ti32 and TiR32 only) (FlexCam models only)104543 TI-SBCCar ChargerBattery Charger(FlexCam models only) (FlexCam models only)Moisture detection: Accurately detectmoisture behind interior walls, in ceilings,and under carpets.Roofing: Detect water-saturated insulationin flat-roof systems to locate damagedportions of roofing structure.TI-SBPRechargeable Battery Pack(FlexCam models only)TI-TRIPODTi Tripod Mounting Base(all models except FlexCam)Mold remediation: Control mold byrevealing undetected sources of moisture.Energy audits: Perform residential andcommercial energy audits by scanning forheating or cooling (energy) loss, moistureinvasion, and HVAC/R problems.Check price and availability atwww.fluke.com/wtb48Thermal ImagingFor more information, go to www.fluke.com/thermal_imaging

Fluke 560 SeriesInfrared ThermometersSpecificationsFluke 566 and 568 IR and ContactThermometersJust when you thought advanced IR temperaturemeasurement should be easier! With a straightforwarduser interface and soft-key menus, theFluke 566 and 568 make even complex measurementseasy. With just a few pushes of a buttonyou can easily adjust emissivity, start data logging,or turn on and off alarms. With a rugged,easy-to-use design, the Fluke 566 and 568can stand up to tough industrial, electrical, andmechanical environments.• Measure up to 800 °C (1470 °F)• Easily access advanced features with the softkeybuttons and graphical display• Measure smaller objects from further away• Compatibility with most type-K thermocouples• Confidently measure more surfaces, withadjustable emissivity and built-in materialstable• Log and download measurements for reporting(568)• Two levels of backlight• Audible and visual alarms alert you to measurementsoutside of set limits• Min, Max, Avg, and Dif functions• Includes KTC bead probe• 1 % measurement accuracy• Versatile interface with six languagesModels Fluke 561 Fluke 566 Fluke 568 Fluke 68IS Fluke 62Infrared temperature range -40 °C to 535 °C(-40 °F to 1022 °F)Accuracy-40 °C to 650 °C(-40 °F to 1200 °F)greater of ± 1 % or ± 1 °C (2 °F)-40 °C to 800 °C(-40 °F to 1470 °F)-32 °C to 760 °C(-25 °F to 1400 °F)greater of ± 1 %or ± 1 °C (2 °F)-30 °C to 500 °C(-20 °F to 932 °F)greater of ± 1.5 %or ± 1 °C (2 °F)Distance to Spot (D:S) 12:1 30:1 50:1 50:1 10:1SightingLaser pointTypical distance to target Up to 2.5 m (7 ft) Up to 4.5 m (15 ft) Up to 7.5 m (25 ft) Up to 7.5 m (25 ft) Up to 2 m (6 ft)Probe type Thermocouple K RTDContact temperature range -40 °C to 550 °C(-40 °F to 1022 °F)Number of on-boardmemory locationsPC download and software-270 °C to 1372 °C(-454 °F to 2501 °F)-40 °C to 260 °C(-40 °F to 500 °F)20 99 12Yes,with FlukeView ®FormsSoft-key feature menunavigatonYesMin/Max/Avg/Dif Min/Max/Dif Min/Max/Avg/Dif Min/Max/Avg/Dif MaxEnglish, French, Chinese,Spanish, Portuguese,YesGerman user interfaceMaterial type adjustment(emissivity)Hi/Med/Lo Material table or 0.1 to 1.00 by 0.01 0.1 to 1.00 by 0.01 Preset to 0.95Two levels of backlightYesHigh and low alarms High and low alarms High and low alarmsHazardous locationapprovalHands-free loggingFM approvedintrinsically safeYesBattery 2AA 9 VIncluded caseHard case (exceptHard case561/R and 561/P)WarrantyTwo-yearSoft caseSpecialty modelsFluke 561 Infrared andContact ThermometerThe Fluke 561 combinesthe temperature measurementfunctionsthat professionalsneed for most HVACand industrial jobs,all in one tool.• Pipe probe forsuperheat andsub-cooling andother contactand ambientmeasurements• Min, Max and Dif functions help youquickly identify problems• Scan large areas or small objectsquickly and efficientlyFluke 61 InfraredThermometers• Easy to use one buttonoperation• Easy targeting with brightlaser• Shock-absorbing moldingincreases ruggedness• Two-year conditionalwarranty• Temperature measurementrange up to 275 °C (525 °F)• 8:1 optics• Accurate to within ± 2 % of readingor 2 °C, whichever is greaterRecommended accessories80PK-11Pipe Clamp ProbeSee page 5880PK-27Industrial SurfaceTemperature ProbeSee page 5880PK-1080PK-18Pipe ClampPipe ClampTemperature Probe Temperature ProbeSee page 58 See page 54Ordering informationIncluded accessoriesModelsUSB cable, FlukeView® Forms software, thermocouple K-type bead probe, FLUKE-568 Infrared Thermometercarrying case, two AA batteries, users manual, quickstart guide.Thermocouple K-type bead probe, carrying case, two AA batteries, users FLUKE-566 Infrared Thermometermanual and quickstart guide.Thermocouple K-type pipe probe, carrying case, two AA batteries, users FLUKE-561 Infrared Thermometermanual.9 V battery, instruction sheet. FLUKE-61 Infrared ThermometerCheck price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.com/thermometersThermometers49

Fluke 62 Mini Infrared ThermometerNon-contact temperature measurementThe Fluke 62 Mini non-contact thermometer is the perfectintroduction to infrared (IR) thermometers for the professional.With the best accuracy in its class, the Fluke 62 mini offersquick and reliable surface temperature readings. This compactand portable tool enables professionals to diagnose heating andventilation problems and monitor the temperature of electricalmotors and electrical panels without contact.• Accurate to within ± 1.5 % of reading or ± 1.5 °C• Temperature measurement range up to 500 °C (932 °F)• 10:1 optics• Backlit display for poorly lit areas• Laser sighting• Dual display shows current and max measurementssimultaneouslyFluke 50 Series II ThermometersLab accuracy in a field thermometerFeaturesAll models offer:• Laboratory accuracy: ± (0.05 % + 0.3 °C)• Large backlit dual display• Min/Max/Avg• Electronic offset function maximizes overall accuracy• Supports a wide range of thermocouple types• Temperatures displayed in °C, °F, or Kelvin (K)Powerful data logging capabilitiesThe Fluke 53 II B and 54 II B can log up to 500 points of data tointernal memory.• User-adjustable recording intervals• Real-time clock captures the exact event time• Recall function lets logged data be easily reviewed• Download data to optional FlukeView® PC softwareSpecialty modelsFluke 570 Series InfraredThermometersThe Fluke 572 and 574 areideal diagnostic tools formaintenance professionalsrequiring accuratetemperature readings atall distances. Predictivemaintenance professionalsrequiring analysisand documentation usethe 574 model, with100-point data loggingwith the includedsoftware for graphing andanalysis for follow-up reporting anddocumentation.• Backlit display for poorly lit areas• Displays last ten temperaturereadings• Enhanced optics (distance to spotratio up to 60:1)Intrinsically safe model on page 39.Recommended kits62/T+PRO/1AC-II• 62 Non-contactThermometer• T+RO Electrical Tes• 1AC-II Voltage Dete• Carrying caseT5-600/62/1AC-II Kit• Fluke 62 Mini IRThermometer• Fluke T5-600 VolElectrical Tester• 1AC-II VoltageDetector• Carrying caseFeatures 54 II B 53 II B 52 51Thermocouple types K,J,T,E,N,R,S K,J,T,E,N,R,S K,J,T,E K,J,T,ENumber of inputs Dual Single Dual SingleTime stamp Time of day Time of dayOrdering informationIncluded accessoriesModelsStorage pouch and instruction sheet. FLUKE-62 Mini Infrared ThermometerFLUKE-62/T+PRO/1AC IR Thermometer, Electrical Tester and Voltage Detector KitFLUKE-T5-600/62/1AC IR Thermometer, Electrical Tester and Voltage Detector KitFLUKE-62/322/1AC IR Thermometer, Clamp Meter and Voltage Detector KitFLUKE-411D/62IR Thermometer and Distance Laser Meter KitBead thermocouple(s), batteries, FLUKE-54-2-BDatalogging Thermometer, Dual Inputoverview manual and instructionalguide on CD.FLUKE-53-2-BDatalogging Thermometer, Single InputFLUKE-52-2Digital Thermometer, Dual InputFLUKE-51-2Digital Thermometer, Single InputThermocouple K probe (574), power FLUKE-574-CFPrecision Infrared Thermometer w/Logging SW Close Focussupply (574), RS-232 data cable (574),data graphing, storage and analysisFLUKE-574Precision Infrared Thermometer w/Logging SWsoftware on CD (574), hard case, two FLUKE-572-CFPrecision Infrared Thermometer with Close Focus OptionAA batteries, operator’s guide on CD. FLUKE-572Precision Infrared Thermometer62/322/1AC-II Kit• Fluke 62 Mini IRThermometer• Fluke 322 Clamp Me• 1AC-II Voltage Dete• Test leads• Carrying case62-411D Kit• Fluke 62 Mini IRThermometer• Fluke 411D LaseDistance Meter• Soft pouch foreach modelCheck price and availability atwww.fluke.com/wtb50ThermometersFor more information, go to www.fluke.com/thermometers

Hawk IR C-Range IR-WindowsGot switchgear?Fluke CLKTUse arc-resistant IR Windows withQuadraband optic technologyInfrared windows mount into panel doors and covers for switchgear,transformers, buss bars and other live electrical equipment,allowing thermal, ultraviolet, visual and fusion technologies to beused without exposing personnel to live equipment.• Reduce the risk associated with electrical thermography• Reduce labor required to inspect your switchgear from threeheads to one• Stay safety compliant withNFPA 70E and other safetyprotocols and leave the panelsclosed• Extend the life of your equipmentwith more frequent IRscans• Easy to install• Durable enough to withstandextreme outdoor conditions yetpractical for indoor applicationsas wellFluke CLKTOApplicationsFluke 1524/1523 ReferenceThermometersThe 1523/24 Reference Thermometers from the Hart Scientific Divisionmeasure, graph, and record PRTs, thermocouples, and thermistors. Youcan measure up to 0.3 seconds per sample and plot and scale trendsin real time. Both thermometers have memory for up to 25 readingswith statistics. The 1524 has 2 inputs with data logging memory for15,000 measurements with date and time stamps.Temperature probes are required for measurements and are soldseparately as accessories. The universal thermocouple adapter isconfigurable for different thermocouple types and has memory forcalibration coefficients. Free IOToolkit software is included for updatingpassword protected calibration information stored in 1523/1524probe connectors.Accuracies of selected readout/probe combinations including readoutaccuracy probe calibration and probe drift (± °C).Recommended accessoriesFluke 1524/1523Features5616-12-P5610-9-PPrecision PRTPrecision Thermistor305 mm x 6.35 mm 229 mm x 3.2 mm(12 in x .25 in) (9 in x 1/8 in)Temperature 5616-12 5610-9-200 °C (-328 °F) 0.0140 °C (32 °F) 0.021 0.009100 °C (212 °F) 0.027 0.030300 °C (572 °F) 0.040420 °C (788 °F) 0.050Equivalent temperature readout accuracy for measuring type K thermocouples is ± 0.24 °C (± 0.43 °F) from 0 °C to 1370 °C(32 °F to 2498 °F) and ± 0.61°C (± 1.10 °F) from –200 °C to 0 °C (–328 °F to 32 °F). Additional errors for thermocouple accuracyor calibration must be added separately.Ordering information2373-LTCSmart connectorwith universalTC adapterFLK80K180PK-1 Type KProbe and adapter(2373-LTC)Included accessoriesModelsIR Windows are supplied complete, FLK-050-CLKTassembled and ready for installation.FLK-075-CLKTIn addition to the IR Window eachcarton contains an installation CD, FLK-100-CLKTself-adhesive drilling template, security FLK-075-CLKTOaccess key, warranty statement.12 V dc universal power supply, FLUKE-1524RS-232 cable, NIST traceableFLUKE-1523calibration certificate, technical manualand 9940 I/O ToolKit software on CD,three AA batteries, users guide.50 mm (2 in) C-Range IR Window, Kwik Twist75 mm (3 in) C-Range IR Window, Kwik Twist100 mm (4 in) C-Range IR Window, Kwik Twist75 mm (3 in) C-Range IR Window, Kwik TwistThermometer Readout (2 inputs)Thermometer Readout (1 input)TPAK, 2373-LTC, carrying case. FLUKE-1524-P1 1524 Bundled with 5616 PRTFLUKE-1523-P11523 Bundled with 5616 PRTTPAKMagnetic Meter HangerSee page 62Check price and availability atwww.fluke.com/wtbFor more information, go to www.fluke.comThermometers/IR-Windows51

Fluke 810 Vibration TesterTake a vibration expert alongGet answers now!The Fluke 810 Vibration Tester is themost advanced troubleshooting tool formechanical maintenance teams whoneed an answer NOW. It is a unique newkind of troubleshooting tool, engineeredto detect and evaluate the most commonmechanical problems.The Fluke 810 Vibration Tester uses asimple step-by-step process to report onmachine faults the first time measurementsare taken, without prior machinehistory.SoftwareViewer PC Software• Store and track your data• Generate diagnostic reportsand track the severity of yourmachine’s condition• Import and store JPEG and FlukeIS2 thermal imagesUse the Fluke 810 to:• Easily determine the root cause, location and severity of common mechanical faults• Efficiently prioritize and plan equipment repair or replacement• Effectively deploy maintenance resources at the point of greatest impactSimple 3 step processThe Fluke 810 helps you locate and diagnose common mechanical problems andprioritize repair actions in three simple steps:1. Setup: Vibration testinghas never been easierThe Fluke 810 asks forbasic machine informationyou already know,like RPM and horsepower.Its onboard Infofeature gives you fieldtips for setting up andtaking measurementslike a pro.SpecificationsDiagnostic specificationsAnalysis forMachine rotational speed rangeDiagnosis detailsMotors, fans, blowers, belts and chain drives, gearboxes, couplings, centrifugal pumps, pistonpumps, sliding vane pumps, propeller pumps, screw pumps, rotary thread/gear/lobe pumps, pistoncompressors, centrifugal compressors, screw compressors, closed coupled machines, spindles200 rpm to 12000 rpmPlain-text diagnosis, fault severity (slight, moderate, serious, extreme), repair details, citedpeaks, spectraTester specificationsIP rating IP 54A/D converter4 channel, 24 bitDynamic range128 dBFFT resolution800 linesBatteryLithium-ion, rechargeable, 8 hours operating lifeOnboard storage capacity2 GB internal micro SD cardWarrantyThree-years (tester), One-year (sensor and tachometer)Sensor specificationsSensor typeTri-axial accelerometer , 100 mV/g (± 5 %, 25 °C)Tachometer specificationsTachometer type Laser Diode Class 2Ordering information2. Measure: The Fluke810 fits easily intoyour maintenanceroutine. Use it to quicklytroubleshoot problemsor monitor machinecondition.3. Diagnose: Fix it rightthe first time: With thepress of a button, theFluke 810 identifies theroot cause, its location,and the problem’sseverity.Application tipsBreakthrough diagnostictechnologyThe Fluke 810’s diagnostic technologycombines powerful algorithms with adatabase of real-world measurementexperience, making the Fluke 810 themost advanced troubleshooting tool formechanical maintenance teams.Analyze most common equipment:• Motors• Fans and blowers• Belt and chain drives• Gearboxes• Pumps• Compressors• SpindlesDetect the most common causes ofmechanical failure:• Bearing problems• Misalignment• Unbalance• LoosenessResourcesInteractive, selfpacedtrainingon DVDLearn more aboutthe basics ofvibration and howto fully utilize thefeatures and functionalityof theFluke 810. Fluke has partnered withMobius Institute, an industry leaderin vibration training, to develop aninteractive training DVD included witheach Fluke 810.Included accessoriesTri-axial accelerometer, magnet mount, mounting pad kit with adhesive, quickdisconnectaccelerometer cable, laser tachometer with storage pouch, batterypack with cable and adapters, shoulder strap, adjustable hand strap, Viewer PCsoftware, mini USB to USB cable, carrying case, training DVD, getting startedguide, quick reference guide, users manual on DVD.ModelsFLUKE-810FLUKE-810 Vibration TesterCheck price and availability atwww.fluke.com/wtb52VibrationFor more information, go to www.fluke.com/vibration

Accessories as toughas your meterTPAK Meter Hanger—hang your meter frommagnetic surfaces andfree both hands(see p. 62)TL175 TwistGuard TestLeads—get two categoryratings with one set oftest leads and a wire thatchanges color when theleads need to be replaced(see p. 57)AC285 SureGripAlligator Clips—SureGriprubber provides areliable, ergonomicgrip in slippery hands(see p. 57)When your job depends on your meter... yourmeter depends on Fluke Genuine Accessories53

Fluke cases and holstersA premium meter deserves a premium caseC35 C550 CXT80 C510 H5Soft casesC12A Meter Case• Made of vinyl• Dimensions (HxWxD): 172 x 128 x 38 mm(6.8 x 5 x 1.5 in)C75 Accessory Case• Made of vinyl• Dimensions (HxWxD): 179 x 103 x 26 mm(7 x 4 x 1 in)C50 Meter Case• Made of vinyl• Dimensions (HxWxD): 192 x 90 x 38 mm(7.56 x 3.5 x 1.5 in)C25 Large Soft Case for DMMs• Made of vinyl• Dimensions (HxWxD): 218 x 128 x 64 mm(8.6 x 5 x 2.52 in)C90 Soft Case for DMMs• Made of vinyl• Dimensions (HxWxD): 205 x 90 x 72 mm(8 x 3.5 x 2.8 in)C35 Soft Carrying Case• Made of durable polyester 600D• Dimensions (HxWxD): 220 x 140 x65 mm (8.7 x 5.5 x 2.6 in)C23 Soft Carrying Case• Made of durable vinyl• Dimensions (HxWxD): 225 x 95 x 58 mm(8.9 x 3.75 x 2.3 in)C280 Soft Case• Made of durable polyester 600D• Dimensions (HxWxD): 230 x 185 x65 mm (9 x 7.3 x 2.6 in)SelectionGuide10/11/12/12B110/111/112114/115/116/11720/70 Series27 II/28 II/27175/177/17980 Series III/83V87V/89 IVC115 Soft Carrying Case• Made of durable polyester 600D• Dimensions (HxWxD): 240 x 205 x75 mm (9.5 x 8 x 3 in)C116 Soft Carrying Case• Made of durable polyester 600D• Dimensions (HxWxD): 240 x 230 x65 mm (9.5 x 9 x 2.6 in)C570 Soft Case• Made of vinyl• Dimensions (HxWxD): 240 x 89 to 170 x56 mm (9.5 x 3.5 to 6.7 x 2.2 in)C781 Meter Case• Made of durable polyester 600D• Dimensions (HxWxD): 269 x 141 x 90 mm(10.6 x 5.6 x 3.5 in)C33 Soft Carrying Case• Made of vinyl• Dimensions (HxWxD): 280 x 115 x 55 mm(11 x 4.5 x 2.2 in)C789 Meter and Accessory Case• Made of durable polyester 600D• Dimensions (HxWxD): 308 x 256 x77 mm (12 x 10 x 3 in)C43 Soft Carrying Case• Made of durable polyester 600D• Dimensions (HxWxD): 318 x 230 x90 mm (12.5 x 9.1 x 3.5 in)C550 Tool Bag• Made of ballistic cloth with heavy-dutyhardware• Dimensions (HxWxD): 333 x 513 x231 mm (13 x 20.2 x 9.1 in)233287/289/187/18939/41B43B120 Series50S/50D50 Series II63/66/68321/322330 Series705/707712/713714/715/716/717718725/726741/743/744787/789T3/T51503/1507/1577/1587C280 • • • • • • • • • • • • • • •C345The perfect case for carrying a wide range of Fluke handheld test tools and accessoriesCXT80 • • • 18x • •CXT170 • • • • • • •CXT280C50 • • • •C520AC550/C160028xThe C550 and C1600 are large enough to hold accessories and multiple test toolsC12A • • • •C25 • • • • • • • • • • • • •C33 • • •C35 • • • •C43 • • • • • • • •C90 • • • • • •C115/C116 • • • • • • • • • • • • • • •C125 • •C781 • • • • • • 789 •C789 • • • • • •C101 • • • • • • • • • • • • • • • • • • • • • • •C510 • • • 787C100 • • • • 787C800 • • • • 787•C345 Soft Case• Made of durable polyester 600D• Dimensions (HxWxD): 360 x 200 x240 mm (14 x 8 x 9.5 in)Hard casesCXT Series Extreme Cases• Models CXT80, CXT170, and CXT280 forvarious meter compatibility• Unbreakable, watertight, airtight, chemicalresistant and corrosion proofC800 Meter and Accessory Case• Dimensions (HxWxD): 230 x 385 x115 mm (9 x 15 x 4.5 in)C20 Hard Case• Made of polyprophylene• Dimensions (HxWxD): 256 x 154 x106 mm (10 x 6.1 x 4.2 in)C101 Hard Case• Exterior dimensions (HxWxD): 305 x360 x 105 mm (12 x 14.2 x 4.1 in)• Interior dimensions (HxWxD): 230 x290 x 65 mm (9 x 11.5 x 2.5 in)C100 Universal Carrying Case• Dimensions (HxWxD): 397 x 346 x122 mm (15.7 x 13.6 x 4.8 in)C1600 Gear Box• Includes five hook and loop straps towrap cords and test leads• Dimensions (HxWxD): 260 x 390 x200 mm (10 x 15 x 7.8 in)Leather casesC520A Leather Tester Case• Dimensions (HxWxD): 256 x 154 x106 mm (10 x 6 x 4 in)C510 Leather Meter Case• Dimensions (HxWxD): 287 x 179 x106 mm (11 x 7 x 4 in)HolstersC10 Meter Holster• Compatible with Fluke 10 SeriesMultimeters• Dimensions (HxWxD): 154 x 77 x 45 mm(6 x 3 x 1.8 in)H80M Protective Holster• Includes a hanging magnet, general purposehanger, and hook and loop straps• Dimensions (HxWxD): 190 x 95 x 43 mm(7.5 x 3.7 x 1.7 in)H5 Electrical Tester Holster• Dimensions (HxWxD): 192 x 90 x 38 mm(7.5 x 3.5 x 1.5 in)H3 Clamp Meter Holster• Dimensions (HxWxD): 231 x 90 x 64 mm(9 x 3.5 x 2.5 in)H6 IR Thermometer Holster• Dimensions (HxWxD): 302 x 178 x 57 mm(11.9 x 7 x 2 in)54 AccessoriesFor more information, go to www.fluke.com/accessories

Fluke accessory sets and kitsSave money on our most popular accessoriesTL220 Industrial Test Lead Set• Starter kit for industrial applications• TP220 has round, stainless steel tip• Includes 1 pair: AC220, TP220, TL222• CAT III 1000 V, CAT IV 600 V, 10 ATL223 Electrical Test Lead Set• Starter kit for electrical applications• TP1 has flat blades for wall sockets• Includes 1 pair: AC220, TP1, TL224• CAT III 1000 V, CAT IV 600 V, 10 ATLK-220 SureGrip AccessoryKit with Meter Carry Case• Plunger style alligator clips• Large jaw alligator clips• Sharp test probes• Right to straight test leads• Zippered vinyl carry case with moveabledivider• Holds large DMMsTLK287 Electronics Master TestLead SetThe perfect test lead kit for today’s electronicstest and design• Precision electronic probes with multiplespring-loaded sharp tips to maximizecontact with SMD test points• Micro-grabbers and leads to enable fineSMD test• Modular mini-alligator clips, grabbers,leads, probes, and couplers for virtuallyevery electronics needTLK289 Industrial Master TestLead Set and CaseDesigned for electrical and electronics testin today’s industrial environment• SureGrip alligator clips, grabbers, hookclips and industrial test probesfor dependable contact with a variety oftest points• Magnetic hanger for suspension of yourDMM• Temperature adapter with K-Typethermocouple for direct temperaturemeasurement with your DMM’sTLK-225 SureGrip MasterAccessory Kit• Plunger style alligator clips• Plunger style hook clips• Plunger style pincer clips• Large jaw alligator clips• Sharp test probes• Right to straight test leads• 6-pocket storage pouch, keeps theentire set together10/110 Series114/115/116/11720/70 Series27 II/28 II/27175/177SelectionGuideTLK287 • • • • • • • • • • • • • • • • • • • • • • • • •TLK289 116 • • • •TL220 • • • • • • • • • • • • • • • • • • • • • • • • •TL223 • • • • • • • • • • • • • • • • • • • • • • • • •TL225 • • • • • • • • • • • • • • • • • • • • • • • • •TL238 • • • • • • • • • • • • • • • • • • • • • • • • •TL80A • • • • • • • • • • • • • • • • • • • • • • • • •TL81A • • • • • • • • • • • • • • • • • • • • • • • • •TL71 • • • • • • • • • • • • • • • • • • • • • • • • •TL76 • • • • • • • • • • • • • • • • • • • • • • • • •80K-8, 80K-15, dc dc80K-40only only • • • • • • • •17980 Series87V/233287/289/187/18939/41B/43B90 Series120 Series190 Series321/322330 Series705/707715716/717718725/726741/743744787/78915871577T5 Tester Starter KitGetting started kit for electricians whoalready own a Fluke T5 Tester.• Test probes• Large jaw alligator clips• Zippered soft caseFor more information, go to www.fluke.com/accessoriesAccessories55

Fluke test leads, probes and clipsThe best leads for all your measurement needsFor electronic applicationsTL80A Basic Electronic Test Lead Set• 6 piece set with zippered case• Probes, alligator clips and tip extendersfor electronic applications• CAT II 300 VTL910 ElectronicTest Probes withReplacement Tips• Small profile providesaccessibility• Comes with 5 sets ofreplaceable tips• Replacement tips:TP912• CAT III 1000 V, 3 ATP80 Electronic TestProbes• Tapered tip ideal forprobing electronic componentsor boards• Removable guard for ICprobing• CAT III 1000 V, 10 AFor automotive applicationsTP81 and TP82• Stainless steel probepierces insulationon 14, 16 and18 gauge wire• Design provides completeinsulation while working on fuelinjectors or sensors• TP81 for use with modular test leads(Fluke TL224)• TP82 slips over probe tips (Fluke TL71)• Rated to 60 V dcTP88 RigidBackprobe Pin Set• 2 inch long pinspass between theweather pack seal a• Use with Fluke TL71lead sets• Rated to 60 V dcTLK281 Automotive Test Lead Kit• Insulation piercing probes• Suregrip silicone test leads• Suregrip test probes• Suregrip plunger style alligator clips• Suregrip alligator clips• Carrying caseTP40 AutomotiveBack Probe Pin Set• Set of five 1.5 inchpins• Rated to 60 V dc• Provide an easyconnection pastweather pack seals toconnector conductors• Use with Fluke TL71 or TL75 testlead setsTL82 AutomotivePin & SocketAdapter Set• Collection of maleand femaleadapters allowsyou to make firmconnection to pinand socket connect• Adapters with flexible tips come in thefollowing sizes: 22, 20, 16 and 12• Rated to 60 V dcTP920 Test ProbeAdapter Kit• IC test tip adapters,extended tips, mediumalligator clips fit overTL71 and TL75 testlead sets• IC test tip Adapter, 3 A• Extended probe tip, 3 A• Med. alligator clip, 5 A• CAT II 300 VTL40 Retractable ProbeAssembly• Retractable, insulatedsharp probe tip• CAT III 300 V, 3 ATL26A Telecom TestLead Set• 5-way multipoint testclips for telecommunicationsapplications• Flexible silicone insulatedleads are heatand cold resistant• CAT I 30 V, 8 ATLK282 Deluxe Automotive Test Lead Kit• Insulation piercing probes• Set of five automotive back probe pins• Suregrip silicone test leads• Suregrip test probes• Suregrip plunger style alligator clips• Suregrip alligator clips• Suregrip hook clips• Carrying caseHigh-voltage probes80K-6, 80K-15, 80K-40 High Voltage Probes• Allows a digital multimeter to measure upto 6,000 volts peak, 15,000 volts peak and40,000 volts peak respectively• 1000:1 division ratio output when connectedto 10 MΩ multimeter• Ground clip included• Intended for low energy applications that arereferenced to ground• 80K-15 (not available in Europe)56AccessoriesFor more information, go to www.fluke.com/accessories

Fluke SureGrip accessoriesAs tough as your meterFTPL SureGrip FusedTest Probes with Leads• FTP Fused Test Probeswith built-in fuses foradded protection• TL224 Silicone InsulatedTest Leads• CAT III 1000 V, CAT IV600 V, 10 ATL221 SureGripSilicone Test LeadExtension Kit• Superior strain relief• Includes two adaptersto extend leads 1.5 m• CAT III 1000 V, 10 A,CAT IV 600 V, 10 ATL222 SureGripSilicone InsulatedTest Leads• Superior strain relief• Recommended for usewith AC220, AC280,AC283 test clips• CAT III 1000 V, 10 A,CAT IV 600 V, 10 ATL224 SureGripSilicone InsulatedTest Leads• Superior strain relief• 1.5 m silicone-insulatedwire resistsheat and cold• CAT III 1000 V, 10 A,CAT IV 600 V, 10 ASureGrip accessories provide a reliable grip in slippery hands.Rubber-overmolded surfaces and finger-hugging curves give theuser a comfortable, steady hold on the accessory so they canfocus on making an accurate measurement.Modular test leads and test probes (use test probes with test leads)FTP SureGrip FusedTest Probes• Built-in fuses foradded protection• 2 mm threadedprobe tips includeremovable 4 mmlantern-style spring contacts• Removable GS38 insulated IC caps forprobing closely spaced leads• CAT III 1000 V, CAT IV 600 V, 10 ATP1, TP2, TP4 andTP38 Slim Reach TestProbes• Slender probe bodiesfor probing closelyspaced or recessedpoints• TP1 has a flat blade• TP2 has 2 mm diametertip• TP4 has 4 mm diametertip• TP38 has stainlesssteel insulated probeto help lessen the riskof arc flash explosion• CAT III 1000 V, 10 A, CAT IV 600 V, 10 ATP220 SureGrip Industrial Test Probes• Sharp, 1/2 inch stainlesssteel tip providesreliable contact• Flexible finger barrierimproves grip• CAT III 1000 V, 10 A,CAT IV 600 V, 10 AModular clips (use with test leads, includes one red, one black)AC220 SureGrip Alligator Clips• Insulated, nickel plated jaws gripobjects up to 3/8 in.• Blunt tip grabs roundscrew heads• CAT III 1000 V,CAT IV 600 V, 10 AAC72 Alligator Clips• Slide-on style for test pro• Jaws open to 8 mm• For use with TL71 andTL75 test lead and probesets• CAT III 1000 V, 10 A, CAT IV 600 V, 10 AAC280 SureGrip Hook• Profile narrows to .22 i• Hook opening .20 in. a.08 in. at base• CAT III 1000 V,CAT IV 600 V, 3 AAC283 SureGrip Pincer Clips• 4.5 in. flexible, insulat• Nickel plated pincers oto .20 in.• CAT III 1000 V,CAT IV 600 V, 1 AAC285 SureGrip Alligator Clips• Multi-purpose tooth patterngrips anything from fine gaugewire to a 3/4 in. nut• Nickel-plated steel jaws• CAT III 1000 V,CAT IV 600 V, 10 AThe new standard for saferelectrical measurementsTL175 TwistGuard Test Leads• Probes meet new IEC 61010-031requiremen• Patented exsheath meeCAT III 100CAT IV 600requirementswhile providingtheflexibilityyou need for CAT II measurements• New WearGuard test lead wearindicator that changes color whenleads are damaged and in needof replacement• Probesalwaysshow correctcategory ratingfor tip beingusedShrouddropsSimply twistprobe handle• Advanced strain relief exceeds5,000 bend life• TP175 probes fit standard test leadsTL238 SureGrip Test Lead Set forhigh energy environments• Insulated tipprobes helplessen riskof arc flashexplosion• Probe extenderskeephands awayfrom livecurrent• Includes one pair each, insulatedtest tip probes, probe extenders andTL224 Test Leads• Probes and leads CAT III 1000 V,CAT IV 600 V, 10 A, extenders CATIII 1000 V 10 ATL71 Premium DMM Test Lead Set• Flexible siliconeinsulated leadsare heat and coldresistant• Distinctive comfortgrip probes• Recommended forµV measurements• CAT III 1000 V, 10 A, CAT IV 600 V,10 ATL75 Hard Point Test Lead Set• Extremely hardalloy tips resistwear• Distinctive comfortgrip probes• 1.5 m PVC leads• CAT III 1000 V,10 A, CAT IV600 V, 10 AFor more information, go to www.fluke.com/accessoriesAccessories57

Fluke Temperature accessoriesTurn your digital multimeter into a thermometerOther temperature accessories80TK Thermocouple Module• Converts K-Type thermocouplesignals into mV output• Connects to DMM viastandard banana plugs• Switch selectable °C or °F• Range: -50 °C to 1000 °C(-58 °F to 1832 °F)• Includes 80PK-1 probe80T-150UA Universal Solid StateTemperature Probe• For measurement of air,surface and non-corrosivematerials• Measurement range:-50 °C to 150 °C (-58 °F to 302 °F)• Output: 1 mV/°C or 1 mV/°F (switchselectable)• Connects to DMM via standard bananaplugs80AK-A DMM Adapter• Adapts K-type thermocouplemini-connector to dualbanana plug inputs• Compatible with all FlukeDMMs with temperaturemeasurement functions• Measurement range and accuracyis not affected by the 80AK-A adapter80BK-A Integrated DMMTemperature Probe• Compatible with all FlukDMMs with temperaturemeasurement functions• K-Type thermocouplewith standard bananajack• Convenient one-piece construction• Measurement range: -40 °C to 260 °C(-40 °F to 500 °F)Thermocouple Plug Kits700TC1A kit of 10 mini-plugconnectors. One each ofthe following:Type J (black)Type K (yellow)Type T (blue)Type E (purple)Type R/S (green)Type B or Cu (white)Type L (J-DIN) (blue)Type U (T-DIN) (brown)Type C (red)Type N (orange)700TC2A kit of 7 mini-plugconnectors.Type J (black), twoType K (yellow), twoType E (purple), oneType T (blue), oneType R/S (green), one80PR-60 RTD Temperature Probe• Resistance temperaturedetectorprobe designed toadd contact measurementsto yourFluke 66 and 68Non-Contact InfraredThermometers• Measurement range: -40 °C to 260 °C(-40 °F to 500 °F)• 3.5 mm phono type jack is only appropriatefor Fluke 66 and 68 Thermometers80CK-M and 80CJ-MType K and J MaleMini-Connectors• Isothermal screw terminalfor K or J wire• Suitable for up to 20gauge thermocouplewire• Color coded to industrystandards (K-yellow,J-black)• Two per packageProcess tools accessoriesBP7217• NiCd rechargeable battery;nominal 7.2 volt,1700 mA hr• Use in 867B meters or700 and 740 SeriesCalibratorsBP7235• NiMH rechargeablebattery; nominal7.2 volt, 3500 mA hr• Use in 700 and 740Series Calibrators700LTP-1 Low Pressure Test PumpHand operated pressurepump designed to generateeither vacuum to -13 psi/-.90 bar or pressures to100 psi/6.9 bar. Ideal forlow pressure applicationsrequiring accurate low pressuretesting.700ILF In-line FilterThe Fluke 700ILF canbe used to isolate thecalibrator from incidentalcontact with fluids.Particularly useful withthe 718 calibrator to help keep moistureor oils from contaminating theon-board pump.700PTP-1 Pneumatic TestPumpThe Fluke 700PTP is a handheldpressure pump designedto generate either vacuum to-11.6 psi/-0.8 bar or pressureto 600 psi/40 bar.80PJ-EXT, 80PK-EXT, 80PT-EXTThermocoupleWire ExtensionKitsFor extending andrepairing J, K orT-typethermocouplewires.• Kit includes 3m (approx. 9 ft.)of thermocouplewire and 1 pairof male/femalemini-connectors• Maximum continuousexposuretemperature: 260°C (500 °F)• 80PK-EXT is compatible withK-type thermometers; 80PJ-EXT isdesigned for J-Type thermometers,and 80PT-EXT is designed forT-type thermometers700HTP-1 Hydraulic TestPumpThe Fluke 700HTP isdesigned to generate pressuresup to 10,000 psi/700bar. Use the Fluke-700PRVadjustable relief valves tolimit pressures from 1360 psito 5450 psi.700HTH HydraulicTest HoseThe 700HTH isa 10,000psi, 700 bartest hose thatconnects to acalibration unit under testfrom a Fluke 700HTP hydraulictest pump.700PMP PressurePumpThe 700PMP is a handoperatedpressure pumpto provide pressures upto 150 psi/1000 kPa.Output fitting is 1/8FNPT.Fluke 700-IVCurrent ShuntConversion factor:10 mV = 1 mAAccuracy (% ofinput, 1 year): 0.025 %Input current: 0 to 55 mAInput resistance: 250 Ω nominalOutput resistance: 10 Ω nominalAccuracy specification appliesfrom +18 °C and 28 °C to 50 °CMaximum input voltage: 30 V dcFor more information, go to www.fluke.com/accessoriesAccessories59

Fluke current clampsFor use with multimeters, ScopeMetersand power quality analyzersAC current clamp specificationsi200 i200s i400 i400s i800 i1000s i3000s i2000 flex i3000s flexAC current range 1 A to 200 A 1 A to 200 A 1 A to 400 A 0.5 A to 400 A 1 A to 800 A 0.2 A to 1 A to 3000 A 2 A to 2000 A 3 A to 3000 A1000 AAccuracy< 3 % + 0.5 A48 to 65 HzBandwidth (-3 dB)Maximum conductordiameterMaximumconductor size40 Hz to40 kHz20 mm(0.8 in)< 1 % + 0.5 A48 Hz to65 Hz40 Hz to40 kHz20 mm(0.8 in)2 % + 0.06 A45 Hz to400 Hz5 kHz to20 kHz32 mm(1.25 in).5 A to 40 A, 2% +.015 A, 5 A to400 A, 2 % +.04 A, 45 to400 Hz5 Hz to10 kHz32 mm(1.25 in)0.1 A to10 A ± 3 %+ .01 A,10 A to 200 A± 2 %,200 A to800 A ± 1 %30 Hz to10 kHz (typical)54 mm(2.13 in)300 MCM 300 MCM 750 MCM 750 MCM 2-500 MCM or1-1000 MCMOutput levels 1 mA/A 10 mV/A100 mV/AOutput cable1.5 mshroudedbanana plugs2 m to BNCtermination1 mA/A 10 mV/A1 mV/A1.5 mshroudedbanana plugs2.5 m to BNCtermination0.2 to 10 A:3 % + 0.1 A10 A to100 A:2 % + 0.5 A100 A to1000 A:1 % + 1 A48 to 65 Hz5 Hz to100 kHz54 mm(2.13 in)2-500 MCM or1-1000 MCM1 mA/A 1 mV/A10 mV/A100 mV/A1.6 mshroudedbanana plugs1.6 m to BNCtermination1 to 30 A:2 % + 0.1 A 1to 300 A:2 % + 0.5 A 1to 3000 A: 2% + 2 A48 to 65 Hz10 Hz to100 kHz64 x 100 mm(2.52 x 3.94 in)64 mm(2.52 in)10 mV/A1 mV/A0.1 mV/A2.1 m to BNCtermination± 1 % ofrange45 to 65 HzRanges: 20A, 200 A,2000 A± 1 % ofrange, 45 Hzto 65 HzRanges:30 A, 300 A,3000 A10 Hz to 10 Hz to20 kHz 50 kHz177 mm (7 in) 177 mm (7in) or 265 mm(10.4 in)610 mm(24 in)circumference100 mV/A10 mV/A1 mV/A2 m withdoubleshroudedbanana plugs610 mm or915 mmcircumference100 mV/A10 mV/A1 mV/A2.1 m to BNCterminationWarranty One-year One-year One-year One-year One-year One-year One-year One-year One-yearSafety rating CAT III 600 V CAT III 600 V CAT III 1000 V CAT III 1000 V CAT III 600 V CAT III 600 V CAT III 600 V CAT III 600 V CAT III 600 VCAT IV 600 V CAT IV 600 VAC only modelsi200si400AC current clamp selection guideMeter i200 i200s i400 i400s i800 i1000s i3000s i2000 Flex 1 i3000s Flex10/11/12/12B/16/181 A to200 A1 A to400 A*0.1 A to1000 A*1 A to3000 A2 A to2000 A3 A to3000 A110/111/112 3 A to200 A30 A to400 A*3 A to1000 A*30 A to3000 A3 A to2000 A3 A to3000 A114/116 1 A to200 A0.6 A to400 A*0.6 A to1000 A*1 A to3000 A2 A to2000 A3 A to3000 A115/117 60 A to200 A1 A to200 A60 A to400 A0.6 A to400 A*60 A to800 A0.6 A to1000 A*1 A to3000 A2 A to2000 A3 A to3000 A21/23/73/75/77Series III1 A to200 A1 A to200 A1 A to400 A1 A to400 A*1 A to800 A0.1 A to1000 A*1 A to3000 A2 A to2000 A3 A to3000 A26/79 Series III 1 A to40 A1 A to200 A1 A to 40 A &200 A to 400 A2 A to400 A*1 A to 40 A &200 A to 800 A0.2 A to1000 A*2 A to3000 A2 A to2000 A3 A to3000 A27 1 A to200 A1 A to200 A1 A to400 A1 A to400 A*1 A to800 A0.1 A to1000 A*1 A to3000 A2 A to2000 A3 A to3000 A233 60 A to200 A1 A to200 A60 A to400 A0.6 A to400 A*60 A to800 A0.6 A to1000 A*1 A to3000 A2 A to2000 A3 A to3000 A27II2 A to200 A1 A to200 A2 A to400 A1 A to400 A*2 A to800 A0.1 A to1000 A*1 A to3000 A2 A to2000 A3 A to3000 A28II1.8 A to200 A1 A to200 A1.8 A to400 A1.8 A to400 A1.8 A to800 A0.2 A to1000 A*2 A to3000 A2 A to2000 A3 A to3000 A70 Series III 1 A to200 A1 A to400 A*0.1 A to1000 A*1 A to3000 A2 A to2000 A3 A to3000 A175/177/179 3 A to200 A1 A to200 A3 A to400 A1 A to400 A*3 A to800 A0.3 A to1000 A*3 A to3000 A2 A to2000 A3 A to3000 A1577/1587Insulation Meter3 A to200 A1 A to200 A3 A to400 A3 A to400 A*3 A to400 A0.3 A to1000 A*3 A to3000 A2 A to2000 A3 A to3000 A83III/83V/88V2 A to200 A1 A to200 A2 A to400 A1 A to400 A*2 A to800 A0.1 A to1000 A*1 A to3000 A2 A to2000 A3 A to3000 A85/87 Series III87 Series V2 A to200 A1 A to200 A2 A to400 A2 A to400 A*2 A to800 A0.2 A to1000 A*2 A to3000 A2 A to2000 A3 A to3000 A87/89 Series IV187/1892.5 A to200 A1 A to200 A2.5 A to400 A1 A to400 A*2.5 A to800 A0.1 A to1000 A*1 A to3000 A2 A to2000 A3 A to3000 A287/289 1 A to200 A1 A to200 A1 A to400 A0.5 A to400 A*1 A to800 A0.2 A to1000 A*1 A to3000 A2 A to2000 A3 A to3000 A8060A/8062ADMMs2 A to200 A1 A to200 A2 A to400A2 A to400 A*2 A to800 A0.2 A to1000 A*2 A to3000 A2 A to2000 A3 A to3000 A860 Series GraphicalMultimeters1 A to200 A1 A to200 A1 A to400 A3 A to400 A*1 A to800 A0.3 A to1000 A*3 A to3000 A2 A to2000 A3 A to3000 A39/41B PowerMeter1 A to200 A 2 1 A to400 A 2 0.1 A to1000 A 2 1 A to3000 A 2 2 A to2000 A 2 3 A to3000 A 243B PowerQuality Analyzer1 A to200 A0.35 A to400 A0.1 A to1000 A1 A to3000 A2 A to2000 A3 A to3000 A434/435 PowerQuality Analyzer1 A to200 A1.2 A to400 A0.3 A to1000 A1.2 A to3000 ABest to usei430FlexBest to usei430Flex9X ScopeMeterSeries1 A to200 A1 A to400 A0.1 A to1000 A1 A to3000 A2 A to2000 A3 A to3000 A120 SeriesScopeMeters1 A to200 A2.5 A to400 A0.25 A to1000 A2.5 A to3000 A2 A to2000 A3 A to3000 A190 SeriesScopemeters1 A to200 A1 A to400 A0.1 A to1000 A1 A to3000 A2 A to2000 A3 A to3000 A45 DMM 1.5 A to100 A1 A to200 A1.5 A to100 A1.5 A to400 A*1.5 A to 100 A&0.15 A to1000 A*1.5 A to3000 A2 A to2000 A3 A to3000 A500 A to 800 A8808A1 A to200 A1 A to200 A1 A to400 A0.5 A to400 A*1 A to800 A0.1 A to1000 A*1 A to3000 A2 A to2000 A3 A to3000 A8845A/8846A74X Series ProcessCalibrators787/789 ProcessMeters1 A to200 A50 A to200 A1 A to200 A1.1 A to200 A1 A to200 A1 A to400 A50 A to400 A1 A to400 A*11 A to400 A*2 A to400 A*1 A to800 A50 A to440 A* Requires PM9081/001 Adapters.1Three range version.2Current and watt readings will be multiples of 10 higher or lower than actual on some ranges.0.2 A to1000 A*1.1 A to1000 A*0.2 A to1000 A*1 A to3000 A11 A to3000 A2 A to3000 A2 A to2000 A2 A to2000 A2 A to2000 A3 A to3000 A3 A to3000 A3 A to3000 Ai800i1000si2000 Flexi3000s Flexi6000s• 6 A to 6000 A• Compatible with mostproducts except 434/43560AccessoriesFor more information, go to www.fluke.com/accessories

Fluke current clampsFor use with multimeters, ScopeMetersand power quality analyzersAC/DC current clamp specifications80i-110s i410 i1010 i30 i30s i310sDC range 0.1 A to 100 A 1 to 400 A 1 to 1000 A 30 mA to 30 A 30 mA to 30 A 0.1A to 450AAC range 0.1 A to 70 A 1 A to 400 A 1 A to 600 A 30 mA to 20 A rms 30 mA to 20 A rms 0.1A to 300AAccuracy0.1 A to 10 A; dc to 3.5 % + 0.5 A for dc or 2 % + 0.5 A for dc or ac ± 1 % of reading, ± 1 % of reading, 30 A range: 1 % +1 kHz: ± 3 % + 50 mA;up to 100 A add 15 %;up to 20 kHz add 12 %ac (45 to 400 Hz) (45 to 400 Hz)±2mA±2mA50 mA300 A range: 1 % +300 mABandwidth (-3 dB) 100 kHZ 3 kHz 10 kHz dc to 20 kHz (-0.5 dB) dc to 100 kHz (-0.5 dB) DC to 20 kHzZero error adjustment Yes Yes Yes Yes Yes YesMaximum conductordiameter11.8 mm (0.46 in) 30 mm (1.18 in) 30 mm (1.18 in) 19 mm (0.75 in) 19 mm (0.75 in) 19 mm (0.75 in)Maximum conductorsize1 AWG 750 MCM or 2-500MCM750 MCM or 2-500MCM250 MCM 250 MCM 250 MCMOutput levels 10 mV/A, 100 mV/A 1 mV/A 1 mV/A 100 mV/A 100 mV/A 1 mV/A, 10 mV/AOutput cable1.6 meter with BNC2 meter with BNCterminationtermination1.2 meter withshrouded bananaplugs1.2 meter withshrouded bananaplugs1.5 meter withshrouded dualbanana plue2 meters with BNC ter-mination and a BNC tosafety shrouded bananaadapterBattery life 40 hours 60 hours 60 hours 30 hours 30 hours 30 hoursWarranty One-year One-year One-year One-year One-year One-yearSafety CAT II 600 V;CAT III 300 VCAT III 600 V CAT III 600 V CAT III 300 V CAT III 300 V CAT III 300 VAC/DC models80i-110sAC/DC current clamp selection guideMeter 80i-110s i410 i1010 i30 i30s i310s10/11/12/12B/16/18 0.1 A to 100 A dc/ 5 A to 400 A dc/ 5 A to 1000 A dc/ 40 mA to 30 A dc/ 40 mA to 30 A dc/ 0.4 A to 450 A dc/0.1 A to 70 A ac* 7 A to 400 A ac 7 A to 600 A ac 60 mA to 20 A ac 60 mA to 20 A ac 0.6 A to 300 A ac110/111/112 0.14 A to 100 A dc/3 A to 70 A ac*114/115/116/117 0.1 A to 100 A dc/0.1 A to 70 A ac*21/23/70/73/75/77Series III0.1 A to 100 A dc/0.1 A to 70 A ac*26/79 Series III 0.1 A to 100 A dc/0.2 A to 70 A ac*233 0.1 A to 100 A dc/0.1 A to 70 A ac*27 0.1 A to 100 A dc/0.1 A to 70 A ac*27II28II77-IV0.1 A to 100 A dc/0.1 A to 70 A ac*0.1 A to 100 A dc/0.2 A to 70 A ac*0.1 A to 100 A dc/0.1 A to 70 A ac*175/177/179 0.11 A to 100 A dc/0.3 A to 70 A ac*1577/1587Insulation Meter83-III/83-V/88-V85-III/87-III/87-V87-IV/89-IV/187/1890.1 A to 100 A dc/0.3 A to 70 A ac*0.1 A to 100 A dc/0.1 A to 70 A ac*0.1 A to 100 A dc/0.2 A to 70 A ac*0.1 A to 100 A dc/0.1 A to 70 A ac*287/289 0.1 A to 100 A dc/0.1 A to 70 A ac*8060A/8062ADMMs860 Series GraphicalMultimeters39/41B PowerMeter9X ScopeMeterSeries123/124ScopeMeters190 SeriesScopemeters0.1 A to 100 A dc/0.2 A to 70 A ac*0.1 A to 100 A dc/0.3 A to 70 A ac*Usable but will read10 or 100 timeshigher0.1 A to 100 A dc/0.1 A to 70 A ac0.1 A to 100 A dc/0.25 A to 70 A ac0.1 A to 100 A dc/0.1 A to 70 A ac45 DMM 0.1 A to 100 A dc/0.15 A to 70 A ac*8808A0.1 A to 100 A dc/0.1 A to 70 A ac*8845A/8846A0.1 A to 100 A dc/0.1 A to 70 A ac*705/707 0.1 A to 100 A dc,No ac*715 0.1 A to 100 A dc,No ac*74X Series ProcessCalibrators787/789 ProcessMeters0.1 A to 100 A dc/1.1 A to 70 A ac*0.1 A to 100 A dc/0.2 A to 70 A ac*5 A to 400 A dc/300 A to 400 A ac1.4 A to 400 A dc/6 A to 400 A ac1 A to 400 A dc/5 A to 400 A ac1 A to 400 A dc/20 A to 400 A ac1.4 A to 400 A dc/6 A to 400 A ac1 A to 400 A dc/1 A to 400 A ac1 A to 400 A dc/1 A to 400 A ac1 A to 400 A dc/6 A to 400 A ac1 A to 400 A dc/5 A to 400 A ac1.6 A to 400 A dc/30 A to 400 A ac1.2 A to 400 A dc/30 A to 400 A ac1 A to 400 A dc/1 A to 400 A ac1 A to 400 A dc/20 A to 400 A ac1 A to 400 A dc/2.5 A to 400 A ac1 A to 400 A dc/1 A to 400 A ac1 A to 400 A dc/20 A to 400 A ac1 A to 400 A dc/30 A to 400 A ac1 A to 400 A ac**Not spec’d for dc1 A to 400 A dc/5 A to 400 A ac**1 A to 400 A dc/25 A to 400 A ac**1 A to 400 A dc/5 A to 400 A ac**1 A to 400 A dc/15 A to 400 A ac1 A to 400 A dc/2 A to 400 A ac1 A to 400 A dc/1 A to 400 A ac4 A to 400 A dc,No ac4 A to 400 A dc,No ac1 A to 400 A dc/110 A to 400 A ac1 A to 400 A dc/20 A to 400 A ac* Requires PM9081 Adapter** Requires PM9082/001 Adapter***Only for use with the 430 Series Power Quality Analyzers5 A to 1000 A dc/300 A to 600 A ac1.4 A to 1000 A dc/6 A to 600 A ac1 A to 1000 A dc/5 A to 600 A ac1 A to 1000 A dc/20 A to 600 A ac1.4 A to 1000 A dc/6 A to 600 A ac1 A to 1000 A dc/1 A to 600 A ac1 A to 1000 A dc/1 A to 600 A ac1 A to 1000 A dc/6 A to 600 A ac1 A to 1000 A dc/5 A to 600 A ac1.6 A to 1000 A dc/30 A to 600 A ac1.2 A to 1000 A dc/30 A to 600 A ac1 A to 1000 A dc/1 A to 600 A ac1 A to 1000 A dc/20 A to 600 A ac1 A to 1000 A dc/2.5 A to 600 A ac1 A to 1000 A dc/1 A to 600 A ac1 A to 1000 A dc/20 A to 600 A ac1 A to 1000 A dc/30 A to 600 A ac1 A to 600 A ac**Not spec’d for dc1 A to 1000 A dc/5 A to 600 A ac**1 A to 1000 A dc/25 A to 600 A ac**1 A to 1000 A dc/5 A to 600 A ac**1 A to 1000 A dc/15 A to 600 A ac1 A to 1000 A dc/2 A to 600 A ac1 A to 1000 A dc/1 A to 600 A ac4 A to 1000 A dc,No ac4 A to 1000 A dc,No ac1 A to 1000 A dc/110 A to 600 A ac1 A to 1000 A dc/20 A to 600 A ac40 mA to 30 A dc/3 A to 20 A ac30 mA to 30 A dc/60 mA to 20 A ac30 mA to 30 A dc/40 mA to 20 A ac30 mA to 30 A dc/200 mA to 20 A ac30 mA to 30 A dc/60 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/60 mA to 20 A ac30 mA to 30 A dc/40 mA to 20 A ac30 mA to 30 A dc/300 mA to 20 A ac30 mA to 30 A dc/300 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/200 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/200 mA to 20 A ac30 mA to 30 A dc/300 mA to 20 A acUsable but will read100 times higher**30 mA to 30 A dc/50 mA to 20 A ac**30 mA to 30 A dc/250 mA to 20 A ac**30 mA to 30 A dc/50 mA to 20 A ac**30 mA to 30 A dc150 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac40 mA to 30 A dc,No ac40 mA to 30 A dc,No ac30 mA to 30 A dc/1.1 A to 20 A ac30 mA to 30 A dc/200 mA to 20 A ac40 mA to 30 A dc/3 A to 20 A ac30 mA to 30 A dc/60 mA to 20 A ac30 mA to 30 A dc/40 mA to 20 A ac30 mA to 30 A dc/200 mA to 20 A ac30 mA to 30 A dc/60 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/60 mA to 20 A ac30 mA to 30 A dc/40 mA to 20 A ac30 mA to 30 A dc/300 mA to 20 A ac30 mA to 30 A dc/300 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/200 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/200 mA to 20 A ac30 mA to 30 A dc/300 mA to 20 A acUsable but will read100 times higher30 mA to 30 A dc/50 mA to 20 A ac30 mA to 30 A dc/250 mA to 20 A ac30 mA to 30 A dc/50 mA to 20 A ac30 mA to 30 A dc150 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac30 mA to 30 A dc/30 mA to 20 A ac40 mA to 30 A dc,No ac40 mA to 30 A dc,No ac30 mA to 30 A dc/1.1 A to 20 A ac3 mA to 30 A dc/200 mA to 20 A ac0.4 A to 450 A dc/30 A to 300 A ac0.1 A to 450 A dc/0.6 A to 300 A ac0.1 A to 450 A dc/0.4 A to 300 A ac0.1 A to 450 A dc/2 A to 300 A ac0.1 A to 450 A dc/0.6 A to 300 A ac0.1 A to 450 A dc/0.1 A to 300 A ac0.1 A to 450 A dc/0.1 A to 300 A ac0.1 A to 450 A dc/2 A to 300 A ac0.1 A to 450 A dc/0.4 A to 300 A ac0.1 A to 450 A dc/3 A to 300 A ac0.1 A to 450 A dc/3 A to 300 A ac0.1 A to 450 A dc/0.1 A to 300 A ac0.1 A to 450 A dc/2 A to 300 A ac0.1 A to 450 A dc/0.25 A to 300 A ac0.1 A to 450 A dc/0.1 A to 300 A ac0.1 A to 450 A dc/2 A to 300 A ac0.1 A to 450 A dc/3 A to 300 A acNot spec’d for dc0.6 A to 300 A ac0.1 A to 450 A dc/0.5 A to 300 A ac0.1 A to 450 A dc/2.5 A to 300 A ac0.1 A to 450 A dc/0.5 A to 300 A ac0.1 A to 450 A dc/1.5 A to 300 A ac0.1 A to 450 A dc/0.2 A to 300 A ac0.1 A to 450 A dc/0.1 A to 300 A ac0.4 A to 450 A dc,No ac0.1 A to 450 A dc,No ac0.1 A to 450 A dc/11 A to 300 A ac0.1 A to 450 A dc/2 A to 300 A aci410i1010i310s, i30s and i30Hall Effect AC/DCCurrent Clamps• Especially useful forlow current measurementsdown to 30milliampsi310i30si30For more information, go to www.fluke.com/accessoriesAccessories61

Fluke lights and hangersFree your hands and shed light on the contact pointLVD1 Volt Light• Exclusive dual-sensitivity• Detects voltages from 40 V ac to300 V ac• Voltage detector glows blue at 50 Hz to60 Hz or 2.5 cm to 38 cm (1 in to 5 in)away from source• Ultra-bright white LED with 100,000hour bulb life• AAA battery includedLVD2 Volt Light• Non-contact ac voltage detector andbright white LED flashlight• Detects voltage from 90 V to 600 V acfrom 1 to 5 inches away• CAT IV rated, one-year warrantyL205 Mini Hat LightRugged, high-intensity Xenon worklight.• Attaches to a baseball cap• Includes a hat clip• Includes two AAA batteries• WaterproofL206 Deluxe LED Hat Light(hard hat not included)Attach it to a hard hat, a baseball cap,or even a panel door for all the lightyou need.• Three super bright white LEDs—neverburn out• Special hard-hat attachment included• 40-hour battery life• Includes three AAA batteriesL215 SureGrip Kit with Probe Light andProbe Extenders• L200 probe light• TP220 SureGrip test probes• TL224 SureGrip test leads• TP280 test probe extenders• Soft foldable pouch, keeps the entireset togetherL210 Probe Light and Probe Extenders• 8 inch probe extenders fit modular testprobes• Probe and extender length complies withNFPA recommendations• Bright white LED illuminates contactarea• Probe light fits on extender or test probeTPAK ToolPak MagneticMeter Hanger• Free both hands to makemeasurements• Hang your meter from metallicsurfaces like panels and pipes• Kit includes universal hanger clips(two), hook and loop straps (twolengths), adapter and strong magnet• Attaches to back of many Flukemeters, including 110, 170, 180,280 Series, 87V and 83V DMMs,724, 725 and 789 Process Calibrators,70 Series III DMMs, 1503,1507, 1577 and 1587 InsulationMultimeters and 50 Series II DigitalThermometers62AccessoriesFor more information, go to www.fluke.com/accessories

Specialty accessories and softwareGet more out of your multimeterStray voltageSV225• Eliminates stray voltagedue to capacitancebetween wires inelectrical installations• Compatible with allinstruments and test leathat accept standard 4 mm shroudedbanana connectorsPressure and vacuumPV350 Pressure Vacuum Module• Digital pressureand vacuummeasurements ina single module• MeasuresHVAC/R,hydraulic andpneumatic pressuto 350 psig/2413to 500 psig)• Measures to 76 cm Hg (29.9 in Hg)vacuum (not intended for measuringmicrons of vacuum)• Compatible with most digital multimetersFiber opticsFOM Fiber OpticMeterThe Fluke Fiber OpticMeter (FOM) helpsyou test and maintainfiber optic cablewithout having to buya whole new meter. Plug the FOM directlyinto any DMM with a mV dc funtion and a10 mW input impedance, and quickly andaccurately verify fiber optic cable systemloss. Light sources and patch cords soldseparately.FOS 850and FOS850/1300Fiber OpticLight SourcesA varietyof LED lightsources allowyou to test differentcables.Fuse selection guideReplacement fuses for Fluke DMMs are available from your distributor. To orderdirect from Fluke call 1-800-44-FLUKE (U.S.) or email fluke-info@fluke.com.ModelFuse Requirements21-III/75-III/73-IIIP/N 871173 630mA 250V fuseP/N 803293 11A 1000V fuse27 (S/N7247001 P/N 943121 440mA 1000V fuseP/N 803293 11A 1000V fuse83/85/87 (S/N>6565000) P/N 943121 440mA 1000V fuseP/N 803293 11A 1000V fuse83-III/85-III/87-III 87-IV/89-IV/187/189/287/289/77-III/79-III/23-III/26-III/175/177/179/77-IV/27-II/28-IIP/N 943121 440mA 1000V fuseP/N 803293 11A 1000V fuse111/112/115/117/233 P/N 803293 11A 1000V fuse1577/1587 P/N 943121 440mA 1000V fuse1503/1507 P/N 2279339 315mA 1000V fuse787/789 P/N 943121 440mA 1000V fuse (Qty 2)Logging softwareFlukeView® FormsHarness the power of the data loggingfunction on your Fluke Digital Multimeter,Thermometer or ProcessMeter. Log livereadings while connected to a PC, orleave your Fluke 289, 789 or 54-II inplace to capture up to 1,000 readings fordownload to a PC.Choose the model that’s right for you:• FVF-SC2: Includes software and cableused with 280 Series DMMs and 789ProcessMeters, and the 1550B InsulationTester• FVF-SC3: Includes software and cableused with 45 Bench Meters• FVF-SC4: Includes software andcable used with 8845A and 8846AMultimetersGo to www.fluke.com/flukeviewformsto download the demo.FlukeView® Forms BasicAn abridged version of FlukeView Forms.• Available for use with 280 SeriesDMMs and 789 ProcessMeters, only• Upgrade to the full FlukeView Formswith FVF-UG• Compatible with the 280 and 789series only10/11/12/12B110/111/112114/115/116/11720/70 Series27 II/28 II/2770/73 III175/177SelectionGuideFlukeView Forms• • • • •* 789SoftwareTPak • • • • • 83V • • • • • • 789 • •PV350 (pressure) • • • • • • • • • • • • • • • • • • • • • • • •FOM (fiber optic) • • • • • • • • • • • • • • • • • • • • • •CO-210 • • • • • • • • • • • • • • • • • • • • • •*53 B II, 54 B II only.17980 Series III/83V87/89 IV87V233287/289/187/18943B90 Series120 Series190 Series51/52/53/54 II705/707715725/726741/743744787/78915871577For more information, go to www.fluke.com/accessoriesAccessories63

Your authorized Fluke distributorJoin the conversationWe design our products with you in mind. Yeah, we haveguys in lab coats, developing and testing our tools inrooms we dare not enter. But our ideas, the things thatdrive our intense development process, come straight fromthe job site—from pros like you. You are the voice of Fluke’sinnovation. Tell us what you think. Visit our social mediasites, and get the conversation started. We’re listening.More Fluke info online• Complete digitalcatalog• Measurement safety• Newest productswww.fluke.com/catalog• Where to buy• Extended specs• Online Store• How-to informationFluke. Keeping your world up and running.®Fluke CorporationPO Box 9090,Everett, WA 98206 U.S.A.www.facebook.com/fluke.corporationwww.twitter.com/flukecorpwww.youtube.com/flukecorporationFluke Europe B.V.PO Box 1186, 5602 BDEindhoven, The NetherlandsFor more information call:In the U.S.A. (800) 443-5853 or Fax (425) 446-5116In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222In Canada (800)-36-FLUKE or Fax (905) 890-6866From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116Web access: http://www.fluke.com©2003-2011 Fluke Corporation. Specifications subject to change without notice. Microsoft is a registeredtrademark of Microsoft Corporation. Printed in U.S.A. 12/2010 1274458S C-US-N Volume 41Contact us:United StatesGeneral product and salesinformation: 1-800-44-FLUKEfluke-info@fluke.comFluke Thermal Imagers:1-800-760-4523 (U.S. only) allother regions 1-425-446-4620Service and calibration:1-888-99-FLUKEParts: 1-800-526-4731CanadaGeneral product, sales, service,parts and calibration information:1-800-36-FLUKEcanada@fluke.comAustraliaGeneral product and salesinformation: (02) 8850-3333Parts: (02) 8850-3333Service and calibration:(02) 9771-9300SingaporeGeneral product and salesinformation: (65) 6799-5566info.asean@fluke.comService, parts and calibration:(65) 6799-5588service.asean@fluke.comJapanGeneral product and salesinformation: +81-3-3434-0181Service, parts and calibration:+81-3-3434-0188Other countries: 1+(425) 446-5500Modification of this document is not permitted without written permissionfrom Fluke Corporation.