view brochure

TECHNIQUE GUIDE1 2 34Place protective eyewear and clothing onyourself and the patient. Check to see thatthe syringes are securely attached beforemixing. To mix, follow the instructions on thereverse side.Press all mixed gel into the RED syringe.Separate the two syringes and attach theMicro 20g FX tip onto the red syringe. Checkthe flow on a cotton gauze or mixing padprior to applying it intraorally. If resistance ismet, replace the tip and re-check the flow.pant 1805 cPlace Ultradent IsoBlock and self-supportingplastic cheek retractors. Completely rinseand air dry teeth.Securely attach a Micro 20ga tip to OpalDamGreen and check flow. Express a continuousbead along the gingival margin, overlappingapproximately 0.5mm onto the enamel.Begin and finish the bead one tooth beyondthe most distal tooth that is being bleached,building the barrier 4–6mm high and1.5–2.0mm thick. Express the resin throughany open embrasures.5678Light cure the OpalDam Green resin barrierfor 20 seconds per arch using a scanningmotion. Carefully check the resin cure withan instrument.Apply a 0.5–1.0mm thick layer ofOpalescence Boost 40% to the labial surfaceof the tooth and slightly onto the incisal/occlusal surfaces. Allow the gel to remain onthe teeth for 20 minutes.Suction gel from teeth using the Luer Vac andSurgiTip or a surgical suction tip. Do not usewater. Repeat steps 6–7 two times, or untildesired results are achieved. Do not exceed3 applications per visit.After the final application is complete andall visible gel is removed, thoroughly rinsethe teeth.9 10Gently slide the tip of a dental instrumentbeneath the OpalDam Green and lift it off.Check for and remove any interproximalremnants.Evaluate the shade change. If additionalwhitening is desired and no significantsensitivity is noted, re-schedule the patient in3–5 days for repeat treatment or to dispensetake-home whitening trays.Photos courtesy of Ultradent. See IFU for complete instructions.800.552.5512 ULTRADENT.COMFor Professional Use Only. © Copyright 2011 Ultradent Products, Inc. All rights reserved. U.S. Patent Numbers: 5,858,332; 6,305,936; 6,503,484; 6,746,664;RE38,721, RE38,722 & RE38,823. Australian Patent No. 2002355418 & 743275. Mexico Patent No. 229254. Other U.S. and Intn’l Patents Granted and Pending.#58769.5 06061258769.5.indd 16/4/12 6:00 PM

A B C1.Ensure both syringes are securelyattached before proceeding. Press theplunger of the red syringe (C) in, pushingall contents into the clear syringe (B).pant 1805 cAB2a.C2.Forcefully press the small clearstem (A) completely into the largerclear stem (B). See completed stepin figure 2a. Then press the clearplunger (A/B) completely into the redsyringe (C).A/BC25 times3.To activate, continually press thechemical from the red syringe (C)into the clear syringe (A/B) withthumbs. Reverse action, and mix aminimum of 25 times rapidly (12-13times each direction/side).58769.5.indd 26/4/12 6:00 PM