Safety Data Sheet - Sgiindustries.com

DRSafety Data Sheetaccording to 1907/2006/EC, Article 31Page 3/6Printing date 15.02.2008 Version: 1Revision: 15.02.2008Trade name: ZEPTREET 100· Protection of hands:(Contd. of page 2)Protective glovesThe glove material has to be impermeable and resistant to the product/ the substance/ the preparation.· Material of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies frommanufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not becalculated in advance and has therefore to be checked prior to the application.· Penetration time of glove materialThe exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.· Eye protection:Tightly sealed goggles* 9 Physical and chemical properties· General InformationForm:Colour:Odour:· Change in conditionMelting point/Melting range: Undetermined.Boiling point/Boiling range: > 103°C· Flash point: Not applicable.FluidAccording to product specificationCharacteristic· Self-igniting: Product is not selfigniting.· Danger of explosion: Product does not present an explosion hazard.· Vapour pressure at 20°C: 23.0 hPa· Density at 20°C: 0.97800 g/cm³· Solubility in / Miscibility withwater:· pH-value at 20°C: 7.0Fully miscible.· Viscosity:Kinematic at 20°C: 10 s (DIN 53211/4)· Solvent content:Organic solvents: 4.0 %Water: 86.0 %10 Stability and reactivity· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.· Dangerous reactions No dangerous reactions known.· Dangerous decomposition products: No dangerous decomposition products known.GB(Contd. on page 4)

DRSafety Data Sheetaccording to 1907/2006/EC, Article 31Page 6/6Printing date 15.02.2008 Version: 1Revision: 15.02.2008Trade name: ZEPTREET 100· Code letter and hazard designation of product:(Contd. of page 5)C Corrosive· Hazard-determining components of labelling:didecyldimethylammonium chloride· Risk phrases:34 Causes burns.· Safety phrases:2 Keep out of the reach of children.24/25 Avoid contact with skin and eyes.26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.36/37/39 Wear suitable protective clothing, gloves and eye/face protection.45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).· Special labelling of certain preparations:Safety data sheet available for professional user on request.· National regulations:· Technical instructions (air):Class Share in %Water 86.0NK 4.0· Waterhazard class: Water hazard class 2 (Self-assessment): hazardous for water.16 Other informationThis information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product featuresand shall not establish a legally valid contractual relationship.· Department issuing MSDS: SGI Limited / Customer services / Tel: +44 845 2601990· Contact: SGI Limited / Customer services / Tel: +44 845 2601990· * Data compared to the previous version altered.GB