ICU - Interface Control Unit
ICU - Interface Control Unit
ICU - Interface Control Unit
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
NEW<strong>ICU</strong> functions:• Supervision of external and auxiliaryequipment on a remote radio site• Monitored from Jotron RACS III• Alarm indication available via SMSmessage<strong>ICU</strong> - <strong>Interface</strong> <strong>Control</strong> <strong>Unit</strong>www.jotron.com
<strong>Interface</strong> <strong>Control</strong> <strong>Unit</strong>GENERAL SPECIFICATIONSCabinet radiation Meet or exceeds EN 300113 – 1Power supply 90VAC – 260VAC, 24VDC +30%/-10%Operating Temperature range-20 to +55°CStorage Temperature range<strong>Interface</strong>sDETAILED SPECIFICATIONSEthernetEthernet speedProtectionProtocolsSerial <strong>Interface</strong><strong>Interface</strong>-40 to +70°C1 x Ethernet1 x RS-2321 x RS-48514 Analog inputs18 Digital inputs14 Digital outputs7 Current inputsGSM messaging (optional)10/100 Mbps, RJ451.5 KV magnetic isolationTCP/IP, SNMP, HTTPRS-232 (2-wire): Rx, Tx, GNDRS-485 (2-wire): Data+, Data-, GNDDigital InputsNumber of digital inputs 18Dry ContactShort to GND or open (ISO_GND to DI)Wet Contact0 to 1 VDC or 5 to 50 VDC (DI_COM to DI)Active levelConfigurable active high or active lowOptical Isolation2000 VRMS / 3000 VDCDigital OutputsNumber of digital outputs14 (sink type)On-state VoltageMax. 50 VDCOutput Current RatingMax. 200 mA per channelProtectionOver current limit: 280 mA/channelOptical Isolation2000 VRMS / 3000 VDCActive levelConfigurable active high or active lowAnalog InputsNumber of analog inputs 14Signal input range -50V to 0V or 0V to +50VInput impedance13 KΩSampling Rate10 samples/secAccuracy +/- 0.1% FSR @ 25°C+/- 0.3% FSR @ -10 and 60°CResolution16-bitCurrent inputsNumber of current inputs 7Input impedance150ΩMax. Input current20 mASampling Rate10 samples/secAccuracy +/- 0.1% FSR @ 25°C+/- 0.3% FSR @ -10 and 60°CResolution16-bitGSM Messaging (optional)Working frequencies850/900/1800/1900 MHzSIM card readerInternalAntenna connectorSMA 50ΩAlarm interfaceThe <strong>ICU</strong> used as an alarm interface can receive upto 18 digital inputs, 14 analog inputs, 7 current inputsand make this information remotely available.These inputs can be connected to various sensorsto monitor the ground radio installation or buildingconditions.Remote <strong>Control</strong>The <strong>ICU</strong> is intended to provide remote interfacefor ground station control, thus it has an ethernetconnection to facilitate communication. The <strong>ICU</strong>and all of its functions can be remotely managedover SNMP using the particular MIB.GSM connectivityThere is an optional GSM module available as anadd-on for the <strong>ICU</strong>. The purpose of this module isto deliver alarm messages from the ground stationvia SMS messages to the responsible personnel.Agent/Distributor:CONTACT INFORMATIONJotron ASP.O.Box 543281 TjodalyngNorwayTel: +47 33 13 97 00Fax: +47 33 12 67 80sales@jotron.comJotron UK Ltd.Crosland ParkCramlingtonNE23 1LA<strong>Unit</strong>ed KingdomTel: +44 (0) 1670 712000Fax: +44 (0) 1670 590265sales@jotron.comJotron Asia Pte. Ltd.19 Loyang WayChangi Logistics CentreRear Office Block 04-26Singapore 508724Tel: +65 65426350Fax: +65 65429415sales@jotron.comv.BJotron AS reserves the right to change the design and/or specificationsat any time without prior notice. Reservations are alsotaken towards any general errors that may occur.Jotron USA, Inc.10645 Richmond Avenue, Suite 170Houston, TX 77042USATel: +1 713 268 1061Fax: +1 713 268 1062sales@jotron.comwww.jotron.com
Change language