ARENA-VATOR - Gearmore, Inc.

4.2 MACHINE COMPONENTSThe Arena-Vator consists of a cultivatorassembly up front, a leveling blade and a rearroller. It will work the soil, level it, pack andcondition the surface in one pass.ABCDEFCULTIVATOR FRAMEREVERSIBLE POINTS/SHOVELSTINESLEVELING BLADEROLLERHEIGHT ADJUSTMENT ARMFig. 1 - Machine Components4.3 MACHINE BREAK-IN 4.4 PRE-OPERATION CHECKLISTAlthough there are no operational restrictions onthe Arena-Vator when used for the first time, it isrecommended that the following mechanicalitems be checked:A. After Operating For 1 and 5 Hours:1. Check all nuts, bolts and other fasteners.Tighten to their specified torque level.2. Check that the tines are in goodcondition.3. Then go to the regular service schedule asdefined in Section 5.Efficient and safe operation of the Arena-Vatorrequires that each operator reads andunderstands the operating procedures and allrelated safety precautions outlined in thissection. A pre-operation checklist is provided forthe operator. It is important for both the personalsafety and maintaining the good mechanicalcondition of the Arena-Vator that this checklist isfollowed.Before operating the machine and each timethereafter, the following areas should bechecked off:√Use only a small Agricultural tractor of therecommended horsepower on the machine.√√√√Check that the machine is properlyattached to the tractor. Be sure retainersare used on the mounting pins.Be sure extra weights are mounted on thefront of the tractor if required.Check the tines/shovels/blade/roller. Besure they are not damaged or broken andare not badly worn. Repair or replace asrequired.Check for entangled material. Remove thismaterial.11