Opti-Check ™ Round-Up (PDF) - Protective Coatings, Protective ...

Opti-Check Optically Activated PigmentsOAP Pigments fluorescingthe Sherwin-Williams Logounder UV lightOpti-Check Optically Activated Pigments (OAP),available in a variety of tank lining products, allowapplicators to check the coating instantly for:• pinholes and holidays• uniform coverage• proper film thicknessThe fluorescing technology significantly extendsthe service life of tank linings simply by illuminatingthe coating using a portable ASTM E2501 approvedultraviolet source.One Coat SystemPinholes as small as 0.25 mils are identified instantlyby not illuminating when viewed with UV light. Properfilm build and uniform coverage can also be verifiedinstantly by illuminating at a consistently uniformbrightness.Two Coat SystemOpti-Check OAP can be used as a two coat systemusing the OAP product as the first coat. Pinholesas small as 0.25 mils are identified instantly byilluminating where not properly covered by the non-OAP topcoat using the portable UV flashlight.

TANK LININGS AND CORROSION CONTROL COATINGSDura-Plate ® UHS PRIMER with Opti-CheckTechnologyAn ultra-high solids epoxy amine now available withOpti-Check for rapid holiday detection. For use in immersionservice in ballast tanks, oil tanks and refined fuel storage tanks.Dura-Plate UHS Primer provides excellent surface wetting andadhesion properties, especially over rust-pitted steel surfaces.Low odor, low temperature hardener for applications from40°F to 77°F. NSF approved to Standard 61 for potable water(tanks of 1,000 gallons or greater and pipes of 40” diameter orgreater).Fast Clad ® Epoxy Primer with Opti-CheckTechnologyAn ultra-high solids epoxy amine now available withOpti-Check for rapid holiday detection, engineered forimmersion service in sea water ballast tanks, fuel/sea waterballast tanks and petroleum storage tanks. Fast Clad EpoxyPrimer provides excellent surface wetting and adhesionproperties, especially over rust-pitted steel surfaces. The rapidreturn to service (24 hrs @ 77°F) properties of this coatingprovide superior value compared to conventional epoxies. LowVOC and low odor.Nova-Plate ® UHS Primer with Opti-CheckTechnologyAn ultra-high solids epoxy novolac amine now available withOpti-Check for rapid holiday detection. For use in immersionservice in ballast tanks, oil tanks, refined fuel storage tanksand for well deck overheads. Nova-Plate UHS Primer providesexcellent surface wetting and adhesion properties, especiallyover rust-pitted steel surfaces. Low VOC and low odor.Dura-Plate ® UHS with Opti-Check TechnologyAn ultra-high solids epoxy amine available with Opti-Check forrapid holiday detection, engineered specifically for immersionservice in ballast tanks, oil tanks and refined fuel storage tanks.The high build, edge-retentive properties of Dura-Plate UHSprovide superior protection compared to conventional epoxies.Low VOC and low odor. NSF approved to Standard 61 forpotable water (tanks of 1,000 gallons or greater and pipes of40” diameter or greater).ExpressCote HCR with Opti-Check TechnologyA glass flake filled epoxy novolac lining, available withOpti-Check for rapid holiday detection, is engineered toprotect steel tank interiors from chemicals and solvents atambient and elevated temperatures, plus provides a fast returnto service (24 hrs @ 77°F). Applications include water andwaste water facilities, petrochemical storage tanks and piping,crude oil tank interiors, ballast tanks and chemical holdingtanks, well deck overheads and trenches, troughs, sumps andpits.Fast Clad ® ER Epoxy with Opti-CheckTechnologyAn edge retentive ultra-high solids epoxy amine coatingavailable with Opti-Check for rapid holiday detection and fastreturn to service (24 hrs @ 77°F). Designed for immersionservice in sea water ballast tanks, fuel/sea water ballast tanksand petroleum storage tanks. Low VOC and low odor.Macropoxy ® 646 PW Epoxy with Opti-CheckTechnologyA high solids, high build, fast-drying, polyamide epoxyavailable with Opti-Check for rapid holiday detection, classifiedby UL to ANSI/NSF 61 as a tank lining for potable waterstorage tanks. The high solids formulation ensures adequateprotection of sharp edges, corners and welds.Phenicon HS with Opti-Check TechnologyA low-VOC epoxy novolac phenolic coating available withOpti-Check for rapid holiday detection, formulated for use as achemical-resistant internal lining for tanks used to hold crudeoil and most refined petroleum products. Also formulated forsecondary containment uses.To learn more, visit us atwww.sherwin-williams.com/protectiveor call 1-800-524-5979 to havea representative contact you.©2009 The Sherwin-Williams CompanyProtective & Marine CoatingsJanuary 20092005968