KNX/EIB in the WAGO-I/O-SYSTEM

Good reasons for anyone with major projects
A good component manufacturer
is distinguished by the fact that
he off ers development, products,
advice and training. Wherever the
customer needs them.
It is exactly this that distinguishes
WAGO: a mixture of quality, good
products, innovative force and
worldwide presence, perfectly matched
to the customers’ requirements.
Even the innovative WAGO KNX/EIB components
are seamlessly integrated in the WAGO-
I/O-SYSTEM. This provides a large choice of
input and output modules, special modules to
sub-bus systems such as DALI, and controllers
for higher-level networks such as Ethernet.
Once selected, confi gurations are not fi xed.
Changes and expansions are possible at any
time, at the planning stage, during the building
phase and even several years later.
The WAGO-I/O-SYSTEM can be used as a
simple application controller, and also as an
open programmable control system according
to IEC 61131-3. Web servers are automatically
integrated within the Ethernet-based
controllers as an operator interface. The control
units replace several individual KNX/IEB
components cost-eff ectively as room and zone
controllers.
The WAGO-I/O-SYSTEM has been used in
building technology for many years and is
thus accepted by many designers, electrical
installers, system integrators and users - an
important sales argument in the competition
for your valuable orders.
It is no coincidence that components and
composition have the same roots. Components
are more than individual parts but are perfectly
matched elements of a complete composition.
With this level of market acceptance, the technical
features and the continuous development
by WAGO, the WAGO-I/O-SYSTEM provides
the security of investment that modern, fl exible
buildings need.
Designer
• Existing systems can be expanded using new,
previously unavailable functions
• All subsections can be planned using one manufacturer
• All applications can be implemented with one device
• The whole system provides fl exibility for customer wishes
• Positive energy balance by bringing together
several functions; long system life
• Same components used for industrial and
building applications
• Compliance with the norms/certifi cates well
beyond the building technology standard
Installer
• WAGO-ETS 3 plug-in provides the familiar
operator interface
• New applications (from simple logic functions
to complex control tasks)
• Standard applications can be easily created
using pre-designed applications and the free
programming facility; project-specifi c applications
can be fl exibly expanded
• Connection technology provides familiar
safety during installation
System integrator
• New applications possible, e.g. in the heating
and ventilation fi eld
• WAGO-ETS 3 plug-in provides the familiar user interface
• One hardware system for diff erent technologies
• Economic due to universal use across many subsections
• Large number of data points on one controller
• Function blocks available for general applications,
heating and ventilation and other applications
(E-mail, SMS, etc.)
• Operator interface can be implemented via web server
User
• Existing systems can be expanded using new,
previously unavailable functions
• Long system life with guaranteed continuity of supply
• Cost-eff ective web-based service and maintenance
interface automatically incorporated
• Single spare parts holding
• Free choice of service providers for the
comprehensive overall system
• Service-friendly thanks to easy changing of
individual modules
18 19