PL26WR09-04 - Tymphany

PL10″ WooferType Number: PL26WR09-04Features:The PL series is designed for the discerning audiophile customer.To meet the needs of this audience, several new technologieswere developed with the goal of lowering distortion and dampingin the speaker. The coated paper cone reduces vibration andstanding waves, and the vented motor system minimizes powercompression. The combined result is a very open and dynamicsound.Driver Highlights: Magnesium Chassis, NRSC cone, NR rubbersurroundSpecs:Electrical DataNominal impedance Zn 4 ohmMinimum impedance Zmin -- ohmMaximum impedance Zo 32 ohmDC resistance Re 3.2 ohmVoice coil inductance Le 1.7 mHT-S ParametersResonance Frequency fs 26 HzMechanical Q factor Qms 4.49Electrical Q factor Qes 0.38Total Q factor Qts 0.35Force factor Bl 8.7 TmMechanical resistance Rms 1.94 Kg/sMoving mass Mms 55 gSuspension compliance Cms -- mm/NEffective cone diameter D -- cmEffective piston area Sd 337 cm 2Equivalent volume Vas 110 ltrsSensitivity (2.83V/1m) 89 dBRatio BL/√(Re) --Ratio fs/Qts F --Power handling100h RMS noise test (IEC) -- WLong-term Max Power (IEC 18.3) 350 WMax linear SPL (rms) @ power -- dB/WShort Term Max power (IEC 18.2) 600 WVoice Coil and Magnet ParametersVoice coil diameter 50 mmVoice coil height 16 mmVoice coil layers --Height of the gap 8 mmLinear excursion +/- -- mmMax mech. excursion +/- -- mmFlux density of gap -- mWbTotal useful flux -- mWbDiameter of magnet -- mmHeight of magnet -- mmWeight of magnet 1.05 KgNotes:IEC specs refer to IEC 60268-5 third edition.All Tymphany products are RoHS compliant.

Frequency: PL26WR09-04Mechanical Dimensions:PL26WR09-04Tymphany and are trademarks of Tymphany Corporation. © 2009, Tymphany Corporation. All rights reserved. 012409