home automation - Bpt Mitho 3 w 1

More documents

Recommendations

Info

Electric automation systemcomponents.OH/T.01Control terminalHome automation control terminal, back-lit 3,” LCD touch screen display,installation on wall.General characteristicsDisplay: Back-lit LCD touch screen displayProtection rating: IP30Operating temperature: from 0° C to +3° CDimensions: 116x9x27 mmPower supply: from bus lineConnections to system: non-polarised twisted pairThermal characteristicsNo. of heating zones: up to 20Operating mode: Manual, Automatic, System BypassSelectable programs: Heating, CoolingAnti-freeze temperature: +8° CField of temperature adjustment: from +2° C to +3° CHome automation zone characteristicsNo. of home automation zones: up to 2No. of controls: up to 2Control functions: direct, impulse, on/off, step-by-step, house, dimmerTimer controls: up to 0 programmableNo. of scenarios: 16 programmableNo. of activatable lights: up to 100No. of activatable openings: up to 0OH/A.01Power supplyThis is always required for the system to work as it manages the powersupply of all the devices in the system (control terminal, zone modules,relay modules, etc.) directly via bus (non-polarised twisted pair). It has 2terminals for connection to an optional back-up battery.General characteristicsPower supply: 230 V 0/60 Hz electronically protectedElectrical input: 10 VAEmergency power supply: 2 V DC, AC 00 mA (from external devices)Operating temperature: from 0° C to +3° CDimensions: low-profile 6-unit module for installation on DIN railConnections to system: non-polarised twisted pairOH/ASSupplementary power supplierThe Hoasis Plus emergency power supply cuts in automatically in theevent of a black-out, preserving the power supply to all the devices inthe system so that all the connected electrical applications return to theirprevious status when the power supply is restored. The power supply mustbe connected to 2 lead accumulators (OH/B06); the emergency powersupply recharges them, guaranteeing efficiency and a long working life.General characteristicsPower supply: 230 V 0/60 Hz electronically protectedPower absorption: 3 VAEmergency power supply: 2 V CC 00 mA (from OH/B06)Operating temperature: from 0 °C to +3° CDimensions: low-profi le 8-unit module for installation on DIN railConnections to system: non-polarised twisted pair30
OH/B065Rechargeable batteryConnected to the supplementary power supplier, they preserve the mains buspower supply, and keeps all the Hoasis devices powered for up to 10 hours.General characteristicsOutput voltage: 12 V DCOutput current: 6. A/hDimensions: 11x101x6 mmNH-RBBBUS repeaterThe data line repeater connects to the BPT home automation BUS and isused when the maximum distance between devices and power supplier isexceeded, when the maximum amount of cable laid is exceeded or when themaximum number of devices for the system is exceeded. The unit is set up forconnection to an emergency power supply. (12 V DC, AC).General characteristicsPower supply: 230V 0/60 Hz electronically protectedElectrical input: 2 VAEmergency power supply: 12 V DC-AC, 1AOperating temperature: from 0° C to +3° CDimensions: low-profile 8-unit module for installation on DIN railOH/6I6 inputs moduleRealised on a miniaturised container, it allows connection of 6 inputs fromcontrol devices (push buttons, sensors, etc.).46 mmGeneral characteristicsPower supply: from bus lineType of contact input: NO and NC, without cross passage of current or voltage at ends40,5 mm53,5 mmOperating temperature: from 0° C to +3° CDimensions: low-profile 1-unit module for installation on DIN railConnections to system: non-polarised twisted pair56 mm18 mmon/oFFStationbarometerAnemometerTechnicalalarmOH/RI1 relay 3 inputs module46 mmRealised on a miniaturised container, it allows connection of 3 inputs fromcontrol devices (push buttons, sensors, etc.) and 1 output for an electricalload. This is particularly recommended for the activation of applications thatrequire on-site location (e.g. activation of lights with switch/shunt controls).42,5 mm56 mm53,5 mm18 mmGeneral characteristicsPower supply: from bus lineType of contact input: NO and NC, without cross passage of current or voltage at endsNo. of relays: 1Type of relay: 20 V max, A max with resistive load (2 A max with inductive load) - NO contactOperating temperature: from 0° C to +3° C.Dimensions: low-profile 1-unit module for installation on DIN railConnections to system: non-polarised twisted pairon/oFFStationbarometerAnemometerTechnicalalarmIrrigation Boiler Solenoid valve Lighting31
Page 1 and 2: home automationTouch Screen multifu
Page 3 and 4: Systemmanagementand controlTouch Sc
Page 5 and 6: Mitho lights up the whole home.From
Page 7 and 8: TECHNICAL FEATURESHands-free audiof
Page 9 and 10: Image zoomAnswerCall rejectDoor loc
Page 11 and 12: Lighting/lights dimmeringAutomation
Page 13 and 14: Total system enablement opartial sy
Page 15 and 16: Electric AutomationMitho interfaces
Page 17 and 18: Need to power the Mitho terminals a
Page 19 and 20: The BUS BPT system.A programmable l
Page 21 and 22: Great compatibility.The miniaturise
Page 23 and 24: Electric automation.System configur
Page 25 and 26: The system just as you want it.Burg
Page 27 and 28: BRAHMS bus system.The system is cha
Page 29: VAS/100MHTerminal power supplierGen
Page 33 and 34: Made in ItalyMade in ItalyOH/2RP2 r
Page 35: OH/ANTOptional antenna for OH/GSMOp
Page 40: 04.2008 / 2459-0104 / 30 - ELLERANI

home automation - Bpt Mitho 3 w 1

Create successful ePaper yourself

Delete template?

Save as template?