Thermal Shock Chamber

CharacteristicsColor LCD interactivetouch-screen systemOperation and settings simplified by theuse of a touch-screen LCD display(instructions displayed on-screen).At-aglance confirmation of test patterns,test area temperatures, temperaturecycles, upstream / downstream control,and trend graphs display.ControllerTest areaControl panelSetting Interactive key input by touch panelDisplay TFT Color LCDRAM (selected entry): a maximum of 40 patterns can be enteredTest patternsROM (built-in): contains 10 test standard patternsAuxiliaryfunctions Timer preset Program memory Test continuity selection Automatic power shut-off Overheat/ Overcool protection Programmed time display Upstream/ downstream sensor selection Test suspension Stable time control Test completion mode selection Quick exposure control Trend graph Power recovery mode Alarm history display Automatic defrost Sensor calibration Temperature recovery time setting RS-485 communicationLarge 10.9-liter-capacity test areaFeatures a 10.9-liter test area, twice thatof our previous model. The volume thatcan be processed is greatly increased,and a 210 297mm printed circuit boardcan be tested in the horizontal position.Test area anti-drop mechanismA braking system fitted to the drivemechanism prevents specimens fromfalling into the test area when thechamber stops operation.Other protection mechanisms areequipped to ensure that the specimendoes not fall.Easy wiring accessA cable port is provided on the rightside to allow easy wiring of specimensfor measurement during high and lowtemperaturecycle tests.Comprehensive safety systemA dual safety system automaticallystops the test area drive mechanism ifthe door is left open, and automaticallylocks the door when the test area is inmotion.Equipped with casters for mobility3Cable port (50mm, shown with cap installed)