sepp33 review hostmann-steinberg australia pty ltd

TABLE 2.1:SEPP 33 HAZARDOUS MATERIAL STORAGE SCREENING SUMMARYMaterial DG Class TotalQuantity(tonne)Distance toNearest SiteBoundary (m)SEPP 33 ThresholdSEPP 33 DeterminationFlammable gas 2.1 0.036 15 Figure 6 (Ref 1):Based on 0.1 tonnes of Class 2.1 Other Usethreshold.Based on 0.1 tonnes of Class 2.1 Sensitivethreshold.Flammable liquid 3 PG II 3 17 Figure 9 (Ref 1):Based on 5 tonnes of Class 3 PG II Other Usethreshold.Based on 5 tonnes of Class 3 PG II Sensitivethreshold.Flammable liquid 3 PG III 1.6 17 Figure 9 (Ref 1):Based on 5 tonnes of Class 3 PG II Other Usethreshold.Based on 5 tonnes of Class 3 PG II Sensitivethreshold.Total Class 2.1 storage does not exceed SEPP 33threshold. Development is not potentially hazardous.Total Class 3 PG II storage does not exceed SEPP33 threshold. Development is not potentiallyhazardous.Total Class 3 PG III storage does not exceed SEPP33 threshold. Development is not potentiallyhazardous.Corrosivesubstances8 PG III 0.016 15 Table 3 (Ref 1):50 tonnes based on Class 8 PG IIITotal Class 8 PG III storage does not exceed SEPP33 threshold. Development is not potentiallyhazardous.Miscellaneousdangerous goodsBulk combustibleliquidsPackagedcombustible liquids9 PG III 0.5 15 No threshold identified. Figure 4 (Ref 1):Class 9 PG III not potentially hazardous material asper SEPP 33.C1 764 17 As per SEPP 33, if C1 is present on site and is stored in a separate bund or within a storage areawhere there are no Class 3 Flammable Liquids, they are not considered to be potentially hazardous.C1 364 17 Class 3 PG II and Class 3 PG III are stored separately in a flammable liquids cabinet.Document: 20659-001Revision: 0Revision Date: 20 September 2012Document ID: 20659-001 Rev 0Page 8