HOCUT 4800 MSDS Sheet - Quality Tools & Services, Inc.

Houghton International Inc. Revision Date : 03/22/2006Material Safety Data SheetHOCUT 48001. Chemical Product and Company IdentificationProduct Name HOCUT 4800Company NameWebsiteHoughton International Inc.Madison & Van Buren AvesValley Forge, PA 19482www.houghtonintl.comEmergency 24 HOUR - (800) 424-9300Phone Number (CHEMTREC)FAX (610) 666-1376Customer (888) 459-9844ServiceTelephone (610) 666-40002. Hazardous Ingredients% byComponent Cas No Weight HazardsMineral Oil 64742-52-5 30-60 TLV: 5 mg/m³ as oil mistPEL: 5 mg/m³ as oil mistSTEL: 10 mg/m³ as oil mistOther: N/ETriethanolamine 102-71-6 1-10 TLV: 5 mg/m³PEL: N/ESTEL: N/EOther: N/EN/E - Not Established; N/A - Not Applicable; Mfr - Manufacturer Recommendation3. Hazards IdentificationPrimary Entry RoutesEYES, SKIN, INHALATIONAcute EffectsInhalationEyeSkinIngestionCarcinogenicityINHALATION OF MISTS MAY CAUSE IRRITATION OF THE UPPERRESPIRATORY TRACT.MAY CAUSE IRRITATION.PROLONGED OR REPEATED CONTACT MAY CAUSE IRRITATION.MAY CAUSE NAUSEA OR DISCOMFORT. ASPIRATION MAY CAUSE LUNGDAMAGE.THIS PRODUCT DOES NOT CONTAIN ANY COMPONENT REPORTABLE AS ACARCINOGEN UNDER 29 CFR 1910.1200.Page 1424800 Continued on Next Page

Houghton International Inc. Revision Date : 03/22/2006Material Safety Data SheetHOCUT 48003. Hazards Identification - continuedMedical ConditionsAggravated by LongTermExposureChronic EffectsPRE-EXISTING SKIN AND RESPIRATORY CONDITIONS MAY BE AGGRAVATEDBY EXPOSURE.UNKNOWNHMIS:Health 1Flammability 0Reactivity 0* indicates that there may be chronic health effects present4. First Aid MeasuresInhalationEye ContactSkin ContactIngestionNote to PhysiciansREMOVE TO A SOURCE OF FRESH AIR.FLUSH WITH WATER FOR 15 MINUTES. CONSULT PHYSICIAN.WASH WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING ANDLAUNDER BEFORE REUSING. CONSULT PHYSICIAN IF IRRITATIONPERSISTS.DO NOT INDUCE VOMITING. CONSULT PHYSICIAN.NO SPECIFIC ANTIDOTE KNOWN. BASED ON INDIVIDUAL REACTIONS OFTHE PATIENT, THE PHYSICIAN'S JUDGMENT SHOULD BE USED TO CONTROLSYMPTOMS AND CLINICAL CONDITIONS.N/A - Not Applicable5. Fire Fighting MeasuresFlash PointAutoignition TemperatureLELUELExtinguishing MediaN/A - PRODUCT CONTAINS WATERN/DN/DN/DIF WATER IS REMOVED, USE CARBON DIOXIDE, DRY CHEMICAL OR FOAM.Page 2424800 Continued on Next Page

Houghton International Inc. Revision Date : 03/22/2006Material Safety Data SheetHOCUT 48005. Fire Fighting Measures - continuedUnusual Fire or ExplosionHazardsFire Fighting InstructionsCLOSED CONTAINERS MAY SWELL AND RUPTURE WHEN EXPOSED TOEXTREME HEAT. USE WATER SPRAY TO COOL CONTAINERS EXPOSED TOFIRE AND HEAT.WEAR PROTECTIVE GEAR DURING FIREFIGHTING.NFPA:Health 1Flammability 0Reactivity 0SpecialN/AN/A - Not Applicable; ND - Not Determined; > - Greater Than; < - Less Than6. Accidental Release MeasuresSpill or Release ProceduresAPPLY DRY ABSORBENT MATERIAL AND SWEEP UP THOROUGHLY. FLUSHAREA WITH WATER AND MOP UP THOROUGHLY.7. Handling and StorageHandling PrecautionsStorage RequirementsUSE WITH ADEQUATE VENTILATION. AVOID CONTACT WITH EYES, SKIN ANDCLOTHING. WASH THOROUGHLY AFTER HANDLING. DO NOT ADD NITRITESTO THIS PRODUCT.KEEP AWAY FROM STRONG OXIDIZERS. KEEP CONTAINERS CLOSED WHENNOT IN USE. STORE IN A COOL, DRY, WELL VENTILATED AREA.8. Exposure Controls/Personal ProtectionEngineering ControlsPROVIDE GENERAL AND/OR LOCAL EXHAUST VENTILATION TO MAINTAINAIRBORNE CONCENTRATIONS BELOW THE EXPOSURE LIMITS IN SECTION 2.Personal Protective EquipmentEye/Face ProtectionSkin ProtectionSAFETY GOGGLES OR SAFETY GLASSES WITH SIDE SHIELDS.WEAR GLOVES, LONG SLEEVES TO MINIMIZE SKIN CONTACT. USE APRONOR OVERALLS IF SPLASHING IS POSSIBLE.Page 3424800 Continued on Next Page

Houghton International Inc. Revision Date : 03/22/2006Material Safety Data SheetHOCUT 48008. Exposure Controls/Personal Protection - continuedRespiratory ProtectionOtherCommentsUSE AN APPROVED RESPIRATOR (SEE 29CFR1910.134) IF EXPOSURE LIMITSIN SECTION 2 ARE EXCEEDED.EYE WASH AND SAFETY SHOWER RECOMMENDED.USE OF GLOVES AND OTHER SKIN PROTECTION DEPENDS ON THEDURATION OF EXPOSURE AND THE TASK BEING PERFORMED. IFNECESSARY, USE CHEMICALLY RESISTANT GLOVES SUCH AS NEOPRENE,NITRILE OR EQUIVALENT MATERIALS.Comments: Never eat, drink, or smoke in work areas. Practice good personal hygiene after using this material, especially before eating, drinking,smoking, or applying cosmetics.9. Physical and Chemical PropertiesAppearanceAMBER COLOR LIQUIDWater SolubilityEMULSIFIESOdorMILD OIL/AMINE ODORBoiling Point>350°FVapor Pressure(mmHg)N/DFreezing/ MeltingPointN/DVapor Density(Air = 1)N/DEvaporation Rate - Greater Than; < - Less Than10. Stability and ReactivityStabilityChemical IncompatibilitiesHazardous DecompositionProductsTHIS PRODUCT IS STABLE AT ROOM TEMPERATURE IN CLOSEDCONTAINERS UNDER NORMAL STORAGE AND HANDLING CONDITIONS.STRONG OXIDIZERSTHERMAL; OXIDES OF CARBON AND NITROGENPage 4424800 Continued on Next Page

Houghton International Inc. Revision Date : 03/22/2006Material Safety Data SheetHOCUT 480010. Stability and Reactivity - continuedHazardous PolymerizationHAZARDOUS POLYMERIZATION WILL NOT OCCUR.11. Toxicological InformationNO DATA AVAILABLE12. Ecological InformationNO DATA AVAILABLE13. Disposal ConsiderationsDisposalRCRA Hazardous WasteNumberFOLLOW PERTINENT REGULATIONS FOR DISPOSAL. IT IS THERESPONSIBILITY OF THE PRODUCT USER TO DETERMINE, AT THE TIME OFDISPOSAL, WHETHER A MATERIAL CONTAINING THE PRODUCT OR DERIVEDFROM THE PRODUCT SHOULD BE CLASSIFIED AS A HAZARDOUS WASTE.(40 CFR 261.20-24)N/A14. Transportation InformationProper Shipping NameNOT HAZARDOUS UNDER DOT, AIR OR IMO REGULATIONS.15. Regulatory InformationTSCA Section 8(b)CERCLA ReportableQuantitySARA Title III, Section 313ALL OF THE COMPONENTS IN THIS PRODUCT ARE ON THE TSCAINVENTORY.NONETHIS PRODUCT CONTAINS NO TOXIC CHEMICAL SUBJECT TO THEREPORTING REQUIREMENTS OF SECTION 313 OF TITLE III OF THESUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 AND 40CFR PART 372.Page 5424800 Continued on Next Page

Houghton International Inc. Revision Date : 03/22/2006Material Safety Data SheetHOCUT 480015. Regulatory Information - continuedOzone DepletingSubstancesTHIS PRODUCT WAS NOT MANUFACTURED, DOES NOT CONTAIN, AND WASNOT PACKAGED USING ANY CLASS I OR CLASS II OZONE DEPLETINGSUBSTANCE AS DEFINED BY THE CLEAN AIR ACT.16. Other InformationPrepared ByTitleGARY CARLMANAGER, PRODUCT SAFETYDisclaimer: The information presented herein has been compiled from sources considered to be dependable and is accurate as of the date issued.However, since data, safety standards, and government regulations are subject to change and the conditions of handling and use are beyond ourcontrol, Houghton International makes no warranty regarding the accuracy of such data or its suitability for any purchaser¿s use or for any consequenceof its use. The data in this MSDS relates only to the specific material designated herein and does not relate to use in combination with any other materialor in any process. Safe handling and use remains the responsibility of the purchaser and the purchaser has the sole responsibility to determine thesuitability of the materials for any use and the manner of use contemplated. Houghton International assumes no responsibility for injury to the recipient orto third persons or for any damage to any property and the recipient assumes all such risks.Page 6424800 End of MSDS