Metall-Katalog09_EN.qxp:Layout 1

ZH-Models Metal lathes• Headstock with mechanical clutches allowes slow spindlereversing for threading operations• Manual soft start reduces wear on gear and belts• Comfortable handling for long- and crossfeed over Joy-Stick withrapid buttonon• Induction-hardened and ground cast iron gantry bed• Pull-out bed gap section• Permanently lubricated main, feed and apron gear• Hardened and ground gears in headstock and gear box• Guides adjustable without play via V-ledges• Carriage guide Turcite-B coatedd• Central lubrication for carriage• Adjustable feed clutch• Transversal adjustment of tailstock for taper cuts• Tailstock sleeve and hand wheel with adjustable precision scaleTurningIncluded in delivery• 3-axis digital readout• Robust cast iron machine stand• Ø 250 mm three-jaw chuck with basic and reversing jaws(GH-2060ZH / GH-2080ZH)• 4-jaw chuck Ø 325 mm (GH-2060ZH / GH-2080ZH)• Ø 325 mm three-jaw chuck with basic and reversing jaws(GH-2680ZH / GH-26120ZH)• 4-jaw chuck Ø 400 mm (GH-2680ZH / GH-26120ZH)• Face plate Ø 630 mm (GH-2680ZH / GH-26120ZH)• Drive plate Ø 250 mm (GH-2680ZH / GH-26120ZH)• 4-way tool post with indexing function• Live center point MT-5• Fixed center point MT-5• MT-7/ MT-5 reducing sleeve (GH-2060ZH / GH2080ZH)• Reducing sleeve Ø 113/MT-5 (GH-2680ZH / GH-26120ZH)• Steady rest and follow rest• Splash guard• Foot brake with limit switch• Complete coolant system• Halogen machine light• Stop shaft with 5 adjustable cams(switch-off of the longitudinal feed)• Longitudinal stop• Chuck guard with limit switch• Levelling elements• Operating tools in tool boxMachine with right hand apron shown(available on special request)50www.wmhtoolgroup.ch