Industrial Hydraulics Hydraulic and Electronic Components

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Industrial HydraulicsHydraulic and Electronic ComponentsProduct Range InformationThe Drive & Control CompanyIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29PublisherDocument no. RE 00208/08.08Replaces: 07.06Bosch Rexroth AGZum Eisengießer 1D-97816 Lohr a. MainPhone +49 (0) 93 52/18-0Fax +49 (0) 93 52/18-23 58Telex 6 89 418-0eMail documentation@boschrexroth.deInternet www.boschrexroth.deIndustrial TechnologiesFor further advanced information on the products mentioned,please contact your pertinent marketing partner or refer tohttp://www.boschrexroth.com/bri on the Internet.For your pertinent marketing partner, pleaserefer to our global address directory underhttp://www.boschrexroth.com/various/utilities/location/index.jspReprinting or translation, either in whole or in part, only with thepublisher's permission.Subject to revision.

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29You are looking for quality?Rely on Rexroth products!As a leading provider of industrialhydraulics, Rexroth takes a topposition with its parts, systemsand specially customizedelectronic components.In the hydraulics sector, we providethe widest range of standardproducts as well as applicationrelatedsystems and customerspecificspecial solutions of firstquality.When choosing Rexroth products,you will benefit from the competenceand experience of thisinternational market leader whosucceeded in increasing thecapacity of its hydraulic drivecomponents significantly byintegrating microelectronics inall drive and control solutions.You, as a manufacturer of machines,systems and plants, will beprovided with products which aresetting high efficiency standards.Our comprehensive qualitymanagement systems ensuremaximum safety and reliabilityworldwide, even under hardconditions in practice.Our products comply with applicablenational and internationalstandards and can be incorporatedin machine concepts without anydifficulties.Industrial TechnologiesIn addition, certificates have beenissued by international automotivemanufacturers and numerousclassification societies for amultitude of products.Rexroth lays particular emphasison highly efficient products witha low noise emission.This high product standard isensured by the most modern testprocedures as well as currentcalculation and simulation methodsfor the analysis of vibrations andcomponent deformations and thetesting and optimization of prototypes.

ContentsИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 294 Hydraulics Bosch Rexroth AGPage6 Pumps8 Axial piston pumps21 External gear pumps24 Internal gear pumps27 Vane pumps29 Radial piston pumps30 Combination pumps31 Motors32 Axial piston units37 External gear motors38 Radial piston motors39 Cylinders40 Tie rod cylinders41 Mill type cylinders43 On/off valves44 Check valves49 Directional valves56 Pressure control valves69 Flow control valves73 2-way cartridge valves75 Proportional, high-response and servo-valves76 Proportional directional valves82 Proportional pressure control valves93 Proportional flow control valvesIndustrial Technologies97 High-response valves108 Servo-valves109 Accessories for proportional, high-response and servo-valves

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics5ContentsPageGU111 Electronics112 Amplifiers124 Command value conditioning127 Open and closed-loop control electronics135 Sensors and signal transducers138 Electronic accessories141 Electrohydraulic systems149 Control blocks and plates150 Multi-station manifold plates151 Control modules152 Modular plate systems153 Control blocks155 Accumulators and accessories156 Accumulator assemblies158 Accumulator safety valves159 Power units and accessories160 Oil reservoirs161 Standard power units163 Whispering power units164 Primary power units165 Pump/motor groups166 Clamping and drive modules168 Power unit accessories170 Filters171 Cooling and heating elementsIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29PumpsAxial piston pumpsAxial piston pumps in swashplateand bent-axis design are designedfor the medium and high-pressureranges. Variations in design, outputrange and control options ensureoptimum solutions for stationaryapplications.Performance profile• Displacement 5 to 1000 cm³• Nominal pressure up to 400 bar• Maximum speed up to 5600 rpm• Maximum power 933 kW• Modular controllers: hydromechanicaland electrohydrauliccontrollersExternal gear pumpsGear pumps are classic in the fieldof hydraulics.Solo-pumps, multiple pumps andlow-noise "silence" pumps in sevenseries offer a multitude of applicationpossibilities.Performance profile• Displacement 1 to 63 cm³ (up to100 cm³ on inquiry)• Nominal pressure up to 280 bar• For optimum efficiency: Pressurerelatedgap sealing and highmanufacturing precision• Design variants with differentflanges, shafts, built-on valvesand multiple-pump combinationsIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Internal gear pumps Vane pumps Radial piston pumpsInternal gear pumps are suitable foroperation at a continuous pressureof up to 315 bar (depending on size).Compact design with particularlyhigh energy density and minimumspace requirements.Performance profile• Displacement 1.7 to 250 cm³• Continuous pressure up to315 bar• Pumps can be combined witheach other• Low flow pulsation and low-noiseoperation• Excellent volumetric efficiencyOur vane pump frame sizes aremainly used in the low and mediumpressure ranges.Performance profileFixed displacement pumps:• Displacement 18 to 193 cm³• Continuous pressure up to210 bar• Dual-flow pumps, maintenancefriendly,low operating noiseVariable displacement pumps:• Displacement 10 to 150 cm³• Continuous pressure up to160 bar• Multiple pump combinations• Pressure controllers, direct orpilot operatedIndustrial TechnologiesRadial piston pumps are used forthe high-pressure range (operatingpressures up to 700 bar). Valvecontrolled,self-priming pumps with afixed displacement.Performance profile• Displacement 0.40 to 20 cm³• Operating pressure up to 700 bar• Hydrostatic bearing relief for along service life• Multiple pump combinations

PumpsИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 298 Hydraulics Bosch Rexroth AGFixed displacement pumpsDetailed information:RE 914011)The values are valid at anabsolute pressure of 1 barin suction port S.• Sizes NG5 to 1000• Axial tapered piston bent-axis design• Open circuit• Series 6• Standard fixed displacement pumps for any application• Line connections: SAE flanges or female threads• Long-life bearing possible (sizes 250 to 1000)Type A2FOIndustrial TechnologiesSize 5 10 12 16 23 28 32 45Nominal pressure p Nbar 315 400 400 400 400 400 400 400Peak pressure p maxbar 350 450 450 450 450 450 450 450Displacement V gcm³ 4.93 10.3 12 16 22.9 28.1 32 45.6Speed 1) n maxrpm 5600 3150 3150 3150 2500 2500 2500 2240Flow at n maxq V maxl/min 27.6 32.4 37.8 50 57 70 80 102Power Δp = 315 bar P maxkW 14.5 ‒ ‒ ‒ ‒ ‒ ‒ ‒Δp = 400 bar P maxkW ‒ 21.6 25 34 38 47 53 68Torque Δp = 315 bar T maxNm 24.7 ‒ ‒ ‒ ‒ ‒ ‒ ‒Δp = 400 bar T maxNm ‒ 65 76 101 145 178 203 290Weight (approx.) m kg 2.5 6 6 6 9.5 9.5 9.5 13.5Size 56 63 80 90 107 125 160 180Nominal pressure p Nbar 400 400 400 400 400 400 400 400Peak pressure p maxbar 450 450 450 450 450 450 450 450Displacement V gcm³ 56.1 63 80.4 90 106.7 125 160.4 180Speed 1) n maxrpm 2000 2000 1800 1800 1600 1600 1450 1450Flow at n maxq V maxl/min 112 126 144 162 170 200 232 261Power Δp = 400 bar P maxkW 75 84 96 108 114 133 155 174Torque Δp = 400 bar T maxNm 356 400 511 572 678 795 1020 1145Weight (approx.) m kg 18 18 23 23 32 32 45 45Size 200 250 355 500 710 1000Nominal pressure p Nbar 400 350 350 350 350 350Peak pressure p maxbar 450 400 400 400 400 400Displacement V gcm³ 200 250 355 500 710 1000Speed 1) n maxrpm 1550 1500 1320 1200 1200 950Flow at n maxq V maxl/min 310 375 469 600 826 950Power Δp = 350 bar P maxkW ‒ 219 273 350 497 554Δp = 400 bar P maxkW 207 ‒ ‒ ‒ ‒ ‒Torque Δp = 350 bar T maxNm ‒ 1393 1978 2785 3955 5570Δp = 400 bar T maxNm 1272 ‒ ‒ ‒ ‒ ‒Weight (approx.) m kg 66 73 110 155 322 336

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics9PumpsFixed displacement pumps• Sizes NG16 to 500• Axial piston swashplate design• Open circuit• Series 1 (size 71)• Series 3 (sizes 16 to 40 and 125 to 500)• Further pumps of up to the same size can be mounted to the through-drive• Operation with HF fluids possible with reduced technical data (sizes 71 to 500)• Sizes NG250 and 500 also available in high-speed versionType A4FOSize 16 22 28 40Nominal pressure p Nbar 400 400 400 400Peak pressure p maxbar 450 450 450 450Displacement V gcm³ 16 22 28 40Speed 1) n maxrpm 4000 3600 3000 2750Flow at n maxq V maxl/min 64 79 84 110Power Δp = 400 bar P maxkW 43 53 56 73Torque Δp = 400 bar T maxNm 102 140 178 254Weight (approx.) m kg 13.5 13.5 13.5 16.5Size 71 125 250 500Nominal pressure p Nbar 350 350 350 350Peak pressure p maxbar 400 400 400 400Displacement V gcm³ 71 125 250 500Speed 1) n maxrpm 2200 1800 1500 1320Flow at n maxq V maxl/min 152 225 375 660Power Δp = 350 bar P maxkW 91 131 219 385Torque Δp = 350 bar T maxNm 395 696 1391 2783Weight (approx.) m kg 34 61 120 220Detailed information:RE 914551)The values are valid at anabsolute pressure of 1 barin suction port S.Industrial Technologies

PumpsИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 2910 Hydraulics Bosch Rexroth AGVariable displacement pumpsDetailed information:RE 92050Pump for HFC fluids:RE 920531)The values are valid at anabsolute pressure of 1 barin suction port S.• Sizes NG40 to 1000• Axial piston swashplate design• Open circuit• Series 1 and 3• Long bearing life• Further pumps of up to the same size can be mounted to the through-drive• Operation with HFC fluids optionally possible with the same performance data as withoperation with mineral oil (NG125, 180, 250 to 355)• Sizes NG250, 355 and 500 also available in high-speed versionType A4VSOSize 40 71 125 180 250Nominal pressure p Nbar 350 350 350 350 350Peak pressure p maxbar 400 400 400 400 400Displacement V g maxcm³ 40 71 125 180 250Speed 1) n maxrpm 2600 2200 1800 1800 1500Flow at n maxq V maxl/min 104 156 225 324 375Power Δp = 350 bar P maxkW 61 91 131 189 219Torque Δp = 350 bar T maxNm 223 395 696 1002 1391Weight (approx.) m kg 39 53 88 102 184Size 355 500 750 1000Nominal pressure p Nbar 350 350 350 350Peak pressure p maxbar 400 400 400 400Displacement V g maxcm³ 355 500 750 1000Speed 1) n maxrpm 1500 1320 1200 1000Flow at n maxq V maxl/min 533 660 900 1000Power Δp = 350 bar P maxkW 311 385 525 583Torque Δp = 350 bar T maxNm 1976 2783 4174 5565Weight (approx.) m kg 207 320 460 605Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics11PumpsOverview of control and adjustment devicesDR (RE 92060)Pressure controllerDP (RE 92060)Pressure controller for paralleloperationFR (RE 92060)Flow controllerDFR (RE 92060)Pressure and flow controllerp BV g min V g maxV g min V g maxLR2 (RE 92064)Power controllerp BV g min V g maxLR3 (RE 92064)Remote-controlled powercontrollerp BV g min V g maxV g min V g maxHS/HS4 (RE 92076)Hydraulic displacementcontrol (servo-/proportionalvalve)U– V g max+ V g maxUDFE1 (RE 92088)Electrohydraulic controlsystemp BV g minV g maxp B p BV g min V g maxMA (RE 92072)Manual controlp BV g min V g maxEO1/EO2 (RE 92076)Hydraulic displacementcontrol (proportional valve)U– V g max+ V g maxUsHD (RE 92080)Hydraulic control, pilotpressure-relatedV g minV g maxEM (RE 92072)Electromotive controlsV g minV g maxLR2N (RE 92064)Power controller, pilot pressure-relatedp St p BV g min V g maxV g= Displacementp B= Operating pressurep St= Pilot pressures = Actuator travelU = Control voltageIndustrial Technologies

PumpsИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 2912 Hydraulics Bosch Rexroth AGVariable displacement pumpsDetailed information:NG10: RE 92703NG18: RE 92712NG28 to 140: RE 927111)The values are valid at anabsolute pressure of 1 barin suction port S.• Sizes NG10 to 140• Axial piston swashplate design• Open circuit• Series 31 (sizes 18 to 140)• Series 52 (size 10)• Further pumps of up to the same size can be mounted to the through-drive (not with NG10)Type A10VSO (series 31 and 52)Size 10 18 28 45Nominal pressure p Nbar 250 280 280 280Peak pressure p maxbar 315 350 350 350Displacement V g maxcm³ 10.5 18 28 45Speed 1) n maxrpm 3600 3300 3000 2600Flow at n maxq V maxl/min 38 59 84 117Power Δp = 250 bar P maxkW 16 ‒ ‒ ‒Δp = 280 bar P maxkW ‒ 28 39 55Torque Δp = 250 bar T maxNm 42 ‒ ‒ ‒Δp = 280 bar T maxNm ‒ 80 125 200Weight (approx.) m kg 8 12 15 21Size 71 100 140Nominal pressure p Nbar 280 280 280Peak pressure p maxbar 350 350 350Displacement V g maxcm³ 71 100 140Speed 1) n maxrpm 2200 2000 1800Flow at n maxq V maxl/min 156 200 252Power Δp = 280 bar P maxkW 73 93 118Torque Δp = 280 bar T maxNm 316 445 623Weight (approx.) m kg 33 45 60Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics13PumpsOverview of control and adjustment devicesDRPressure controllerDFRPressure and flow controllerDFLRPressure, flow and powercontrollerDFEPressure and flow controller,electronicV g minFHDDisplacement controller,pilot pressure-related, withpressure controlp StV g minV g maxED (RE 92707)Electrohydraulic closedlooppressure controlp BIV g= Displacementp St= Pilot pressurep B= Operating pressureI = C currentU = Control voltageIndustrial Technologiesp BV g maxV g min V g maxp BV g min V g maxp Bp Soll UV g ; p B

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Pumps 14 Hydraulics Bosch Rexroth AGVariable displacement pumpsDetailed information:RE 927141)For NG71 and NG100 themaximum speed valuesare valid at 0.8 bar, forNG140 at 1 bar absolutepressure in suction port S.V g= Displacementp St= Pilot pressurep B= Operating pressureI = C currentU = Control voltage• Sizes NG71 to 140• Axial piston swashplate design• Open circuit• Series 32• Low noise• High efficiency• High reliability• Universal through-driveType A10VSO (series 32)Size 71 100 140Nominal pressure p Nbar 280 280 280Peak pressure p maxbar 350 350 350Displacement V g maxcm³ 71.1 100 140Speed 1) n maxrpm 1800 1800 1800Flow at n maxq V maxl/min 128 180 252Power Δp = 280 bar P maxkW 59.7 84 118Torque Δp = 280 bar T maxNm 317 446 624Weight (approx.) m kg 47 69 73Overview of control and adjustment devicesDRPressure controllerDRF/DRSPressure and flow controllerp BV g min V g maxV g min V g maxED (RE 92)Electrohydraulic closedlooppressure controlp BILAPressure, flow and powercontrollerp BV g min V g maxDFEPressure and flow controller,electronicV g ; p Bp Bp Soll UIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics15PumpsVariable displacement pumps• Sizes NG28 to 1000• Axial piston bent-axis design• Open circuit• Series 6• Robust, for versatile use in open-circuit applications• Hyperbolic power controller• Long-life bearings possible for prolonged service life (sizes 250 to 1000)• Visual or electrical swivel angle indicator on request (sizes 250 to 1000)Type A7VOSize 28 55 80 107 160Nominal pressure p Nbar 350 350 350 350 350Peak pressure p maxbar 400 400 400 400 400Displacement V g maxcm³ 28.1 54.8 80 107 160Speed 1) n maxrpm 3150 2500 2240 2150 1900Flow at n maxq V maxl/min 89 137 179 230 304Power Δp = 350 bar P maxkW 52 80 105 134 177Torque Δp = 350 bar T maxNm 156 305 446 596 891Weight (approx.) m kg 17 25 40 49 71Size 250 355 500 1000Nominal pressure p Nbar 350 350 350 350Peak pressure p maxbar 400 400 400 400Displacement V g maxcm³ 250 355 500 1000Speed 1) n maxrpm 1500 1320 1200 950Flow at n maxq V maxl/min 375 469 600 950Power Δp = 350 bar P maxkW 212 265 340 538Torque Δp = 350 bar T maxNm 1391 1976 2783 5565Weight (approx.) m kg 102 173 234 450Overview of control and adjustment devicesLRPower controllerDRPressure controllerEPElectrical control, with proportionalsolenoidIHDHydraulic control, pilotpressure-relatedp StDetailed information:NG28 to 160: RE 92202NG250 to 1000: RE 922031)The values are valid at anabsolute pressure of 1 barin suction port S.Industrial TechnologiesV g minp BV g min V g maxp BV g min V g maxV g maxV g minV g maxV g= Displacementp B= Operating pressurep St= Pilot pressureI = Control current

PumpsИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 2916 Hydraulics Bosch Rexroth AGVariable displacement pumpsDetailed information:RE 92100• Sizes NG40 to 1000• Axial piston swashplate design• Closed circuit• Series 1 and 3• Valve block for safeguarding the circuit• Further pumps of up to the same size can be mounted to the through-driveType A4VSGSize 40 71 125 180 250Nominal pressure p Nbar 350 350 350 350 350Peak pressure p maxbar 400 400 400 400 400Displacement V g maxcm³ 40 71 125 180 250Speed n maxrpm 3700 3200 2600 2400 2200Flow at n maxq V maxl/min 148 227 325 432 550Power Δp = 350 bar P maxkW 86 132 190 252 321Torque Δp = 350 bar T maxNm 223 395 696 1002 1391Weight (approx.) EO+valve block m kg 47 60 100 114 214Size 355 500 750 1000Nominal pressure p Nbar 350 350 350 350Peak pressure p maxbar 400 400 400 400Displacement V g maxcm³ 355 500 750 1000Speed n maxrpm 2000 1800 1600 1600Flow at n maxq V maxl/min 710 900 1200 1600Power Δp = 350 bar P maxkW 414 525 700 933Torque Δp = 350 bar T maxNm 1976 2783 4174 5565Weight (approx.) EO+valve block m kg 237 350 500 630Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics17PumpsOverview of control and adjustment devicesFR (RE 92060)Flow controllerMA (RE 92072)Manual controlEO1/EO2 (RE 92076)Hydraulic displacementcontrol (proportional valve)DR (RE 92060)Pressure controllersUp Bp B– V g max+ V g maxV g minV g maxDFR (RE 92060)Pressure and flow controllersEM (RE 92072)Electromotive controlp B– V g max+ V g maxV g minV g maxDP (RE 92060)Pressure controller for paralleloperationßßEP (RE 92084)Electrohydraulic displacementcontrol with proportionalsolenoidp B– V g max+ V g maxV g minV g maxII– V g max+ V g maxUHS/HS4 (RE 92076)Hydraulic displacementcontrol (servo-/proportionalvalve)U– V g max+ V g maxUV g minV g maxHD (RE 92080)Hydraulic control, pilotpressure-relatedp St– V g max+ V g maxp StIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Pumps 18 Hydraulics Bosch Rexroth AGVariable displacement pumps (compact units)Detailed information:RE 921051)Variable displacementpump without auxiliarypump2)Pump with EP control andintegrated auxiliary pumpV g= Displacementp St= Pilot pressures = Actuator travelß = Angular position of the rotarypinU = Control voltageI = Control current• Sizes NG250 to 750• Axial tapered piston bent-axis design• Closed circuit• Series 3• Integrated boost pump and valve technology• Compact design• Through-drive and pump combination possible even with integrated auxiliary pumpType A4CSGSize 250 355 500 750Nominal pressure p Nbar 350 350 350 350Peak pressure p maxbar 400 400 400 400Displacement Variable displ. V g maxcm³ 250 355 500 750Integr. auxiliary V g Hcm³ 63 80 98 143pumpSpeed Max. speed n maxrpm 2200 2000 1800 1600Min. speed n minrpm 800 800 800 800Flow 1) at n maxq V maxl/min 550 710 900 1200Power Δp = 350 bar P maxkW 321 414 525 700Torque 1) Δp = 350 bar T maxNm 1391 1976 2783 4174Weight (ca.) 2) m kg 214 237 350 500Overview of control and adjustment devicesHM 1/2/3 (RE 92076)Hydraulic displacementcontrol, flow-relateds (ß)– V g max+ V g maxs (ß)HS/HS4 (RE 92076)Hydraulic displacementcontrol (servo-/proportionalvalve)U– V g max+ V g maxUMA (RE 92072)Manual controls (ß)– V g max+ V g maxs (ß)HD (RE 92080)Hydraulic control, pilotpressure-relatedEM (RE 92072)Electromotive controls (ß)– V g max+ V g maxs (ß)EP (RE 92084)Electrohydraulic displacementcontrol with proportionalsolenoidp St p StV g min V g maxV g min V g maxEO1/EO2 (RE 92076)Hydraulic displacementcontrol (proportional valve)U– V g max+ V g maxUIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics19PumpsVariable displacement pumps• Sizes NG12 to 107, series 1 and 4 (type A2VK)• Sizes NG12 and 28, series 10 (type A7VK)• Axial piston bent-axis design• Open and closed circuits• High-pressure pump for delivering polyurethane components• High dosing accuracy of the delivery volumes• Enhanced corrosion protection• Manual control with precision indicator and clamping device• Dual shaft seal made of special material• Good volumetric efficiencyType A2VK/A7VKType A2VKSize 12 28 55 107Nominal pressure p Nbar 250 250 250 250Peak pressure p maxbar 315 315 315 315Displacement V g maxcm³ 11.6 28.1 54.8 107Flow n = 1500 rpm q V maxl/min 17.4 42.2 82.2 160.5n = 1800 rpm q V maxl/min 20.9 50.6 98.6 192.5Powern = 1500 rpm P maxkW 7.3 17.6 34.3 66.9Δp = 250 barn = 1800 rpm P maxkW 8.7 21.1 41.1 80.3Weight (approx.) m kg 19 36 64 117Type A7VKSize 12 28Nominal pressure p Nbar 250 250Peak pressure p maxbar 315 315Displacement V g maxcm³ 11.6 28.1Flow n = 1500 rpm q V maxl/min 17.4 42.2n = 1800 rpm q V maxl/min 20.9 50.6Powern = 1500 rpm P maxkW 7.3 17.6Δp = 250 barn = 1800 rpm P maxkW 8.7 21.1Weight (approx.) m kg 12.5 22.1Detailed information:Type A2VK: RE 94001Type A7VK: RE 94010Industrial Technologies

PumpsИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 2920 Hydraulics Bosch Rexroth AGElectronics for axial piston unitsOverview of electronic components and systems suitable for axial piston units in stationaryapplicationsDetailed information: Type of component For controllingOpen-loop control electronics, analogRE 29904 VT 2000 Amplifier for proportional valves A10VS / A4VS DRGRE 30111 VT-VSPA1(K)-1 Amplifier module for flow control A10VS / A4VS DRGRE 29935 VT 3000 Amplifier for proportional valves A10VS / A4VS DRGClosed-loop control electronics, analogRE 29955 VT 5035 Amplifier module for flow control A4VS EORE 29763 VT 11019 Amplifier module for flow control A10VS FERE 29993 VT-SR7 Amplifier module for flow control A4VS HSRE 30024 SYDFE1-2X Closed-loop control systems for A10VSO… DFERE 30027 SYDFEC-2X Closed-loop control systems for A10VSO… DFERE 30030 SYDFEE-2X Closed-loop control systems for A10VSO… DFERE 30624 SYDFE1-3X Closed-loop control systems for A10VSO… DFERE 30627 SYDFEC-3X Closed-loop control systems for A10VSO… DFERE 30630 SYDFEE-3X Closed-loop control systems for A10VSO… DFERE 30241 VT 5041 External control electronics for A10VSO... DFE1Closed-loop control electronics, digitalRE 30028 VT-VPCD Closed-loop control system for A4VS...HS4AccessoriesRE 30103 VT 12302 Enclosed card holderRE 29768 VT 19101 ... 19110 19" racksRE 29929 VT-NE30 ... VT-NE32 Compact power supply unitsOn inquiry BODAC PC program for digital amplifier cardsIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics21PumpsExternal gear pumps• Sizes NG1 to 28• Series B and F• Plain bearings for high loads• Drive shafts according to ISO or SAE and customer-specific standards• Combination of several pumps possible• Line connections: connecting flanges or female threads• Pumps with threaded connections have reduced admissible pressuresType AZPSeries B, componentseries 1XNG 1 2 3 4 5Displacement V g maxcm³ 1 2 3 3.8 4.6Operating pressure, continuousp 1 maxbar 210 210 210 190 140Operating pressure, intermittentp 2bar 230 230 230 210 160Max. speed at p2 n rpm 6000 5000 4000 4000 4000Min. speed at p2 n rpm 1000 850 750 750 750Series B, componentseries 2XNG 1 2 2.5 3 4 4.5 5 6 7Displacement V g maxcm³ 1 2 2.5 3.15 4 4.5 5 6.3 7.1Operating pressure, continuousp 1 maxbar 250 250 250 250 250 250 250 225 200Operating pressure, intermittentp 2bar 280 280 280 280 280 280 280 255 200Max. speed at p2 n rpm 6000 5000 5000 4000 4000 4000 4000 3500 3500Min. speed at p2 n rpm 750 750 750 750 750 750 750 750 750Series F, componentseries 1XNG 4 5 8 11 14 16 19 22 22 1)Displacement V g maxcm³ 4 5.5 8 11 14 16 19 22.5 22.5Operating pressure, continuousp 1 maxbar 250 250 250 250 250 250 210 180 210Operating pressure, intermittentp 3bar 280 280 280 280 280 280 230 210 230Max. speed at p2 n rpm 4000 4000 4000 3500 3000 3000 3000 2500 3000Min. speed at p2 n rpm 700 700 700 600 500 500 500 500 500Series F, componentseries 2XNG 4 5 8 11 14 16 19 22 25 28Displacement V g maxcm³ 4 5.5 8 11 14 16 19 22.5 25 28Operating pressure, continuousp 1 maxbar 250 250 250 250 250 250 250 220 195 170Operating pressure, intermittentp 3bar 280 280 280 280 280 280 280 250 225 200Max. speed at p2 n rpm 4000 4000 4000 3500 3000 3000 3500 3500 3000 3000Min. speed at p2 n rpm 700 700 700 600 500 500 500 500 500 500Detailed information:RE 10087RE 10089Note:‒ The maximum pressuresof versions with claw aresometimes reduced!- Applicable to an oil viscosityof 25 mm2/s and anoil temperature of 55 °Cwith HLP 46.- The pressure in the suctionport is 0.7 bar min and3 bar max absolute.1)With extended bearingsIndustrial Technologies

PumpsИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 2922 Hydraulics Bosch Rexroth AGExternal gear pumpsDetailed information:RE 10091RE 10093• Sizes NG20 to 100• Series N and G• Plain bearings for high loads• Drive shafts according to ISO or SAE and customer-specific standards• Combination of several pumps possible• Line connections: connecting flanges or female threads• Pumps with threaded connections have reduced admissible pressuresType AZPIndustrial TechnologiesSeries N; component series 1X NG 20 22 25 28 32 36Displacement V g maxcm³ 20 22.5 25 28 32 36Operating pressure, continuous p 1 maxbar 230 230 230 210 180 160Operating pressure,p 2bar 250 250 250 230 200 180intermittentMax. speed at p2 n rpm 3000 3000 3000 2800 2800 2800Min. speed at p2 n rpm 500 500 500 500 500 500Series N; component series 2X NG 20 22 25 28 32 36Displacement V g maxcm³ 20 22.5 25 28 32 36Operating pressure, continuous p 1 maxbar 250 250 250 230 210 180Operating pressure,p 2bar 280 280 280 260 240 210intermittentMax. speed at p2 n rpm 3000 3000 3000 2800 2800 2800at 10 bar n rpm 3500 3500 3500 3500 3200 3000Min. speed at p2 n rpm 500 500 500 500 500 500Series G; component series 1X NG 22 28 32 38 45 56Displacement V g maxcm³ 22.5 28 32 38 45 56Operating pressure, continuous p 1 maxbar 210 210 210 200 180 160Operating pressure,p 2bar 250 250 250 250 230 200intermittentMax. speed at p2 n rpm 3000 3000 3000 2800 2600 2300Min. speed at p2 n rpm 800 800 800 800 800 800Series G; component series 2X NG 22 25 28 32 36 40 45Displacement V g maxcm³ 22.5 25 28 32 36 40 45Operating pressure, continuous p 1 maxbar 250 250 250 250 250 250 250Operating pressure,p 2bar 280 280 280 280 280 280 280intermittentMax. speed at p2 n rpm 3000 3000 3000 2800 2800 2800 2600at 10 bar n rpm 3500 3500 3500 3200 3200 3200 3000Min. speed at p2 n rpm 600 600 500 500 500 500 500Note:‒ The maximum pressuresof versions with claw aresometimes reduced!- Applicable to an oil viscosityof 25 mm2/s and anoil temperature of 55 °Cwith HLP 46.- The pressure in the suctionport is 0.7 bar min and3 bar max absolute.Series G; component series 2X NG 50 56 63 70 80 100Displacement V g maxcm³ 50 56 63 70 80 100Operating pressure, continuous p 1 maxbar 220 195 170 120 90 70Operating pressure, intermittentp 2bar 250 225 200 150 120 100Max. speed at p2 n rpm 2600 2300 2300 2200 2000 1700at 10 bar n rpm 3000 2600 2600 2500 2300 1900Min. speed at p2 n rpm 500 500 500 500 600 800

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics23PumpsExternal gear pumps (silence version)• Size NG4 to 63• Series S, T and U• Plain bearings for high loads• Drive shafts according to ISO or SAE and customer-specific standards• Combination of several pumps possible• Line connections: connecting flanges or female threads• Optimized pressure pulsation• Extended service life due to reinforced designType AZPSeries S NG 4 5 8 11 14 16 19 22 25 28Displacement V g maxcm³ 4 5.5 8 11 14 16 19 22.5 25 28Operating pressure, continuousp 1 maxbar 250 250 250 250 250 250 250 220 195 170Operating pressure, intermittentp 2bar 280 280 280 280 280 280 280 250 225 200Max. speed at p2 n rpm 4000 4000 4000 3500 3000 3000 3500 3500 3000 3000Min. speed at p2 n rpm 700 700 700 600 500 500 500 500 500 500Series T, component series 2X NG 20 22 25 28 32 36Displacement V g maxcm³ 20 22.5 25 28 32 36Operating pressure, continuousp 1 maxbar 250 250 250 230 210 180Operating pressure, intermittentp 2bar 280 280 280 260 240 210Max. speed at p2 n rpm 3000 3000 3000 3000 2800 2600at 10 bar n rpm 3500 3500 3500 3500 3200 3000Min. speed at p2 n rpm 500 500 500 500 500 500Series U, component series 2X NG 22 25 28 32 36 40 45 50 56 63Displacement V g maxcm³ 22.5 25 28 32 36 40 45 50 56 63Operating pressure, continuousp 1 maxbar 250 250 250 250 250 250 250 220 195 170Operating pressure, intermittentp 2bar 280 280 280 280 280 280 280 250 225 200Max. speed at p2 n rpm 3000 3000 3000 2800 2800 2800 2600 2600 2300 2300at 10 bar n rpm 3500 3500 3500 3200 3200 3200 3000 3000 2600 2600Min. speed at p2 n rpm 600 600 500 500 500 500 500 500 500 500Detailed information:RE 10095RE 10092RE 10098Note:- The pressure in the suctionport is 0.7 bar min and3 bar max absolute.Industrial Technologies

PumpsИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 2924 Hydraulics Bosch Rexroth AGInternal gear pumpsDetailed information:RE 102131)At maximum continuousoperating pressure andn = 1450 rpm.• Sizes NG1.7 to 40• Frame sizes 1 to 3• Low operating noise• Low flow pulsation• High efficiency through sealing gap compensation• Combination of several pumps possible• Can be combined with axial piston pumps and vane pumpsType PGFFrame size 1 NG 1.7 2.2 2.8 3.2 4.1 5Displacement V g maxcm³ 1.7 2.2 2.8 3.2 4.1 5Industrial TechnologiesOperating pressure, continuous p maxbar 180 210 210 210 210 180Operating pressure, intermittent p maxbar 210 250 250 250 250 210Power 1) P kW 1.2 1.8 2 2.2 2.6 3.1Speed range n maxrpm 4500 3600 4000 3600 3600 3600Weight (approx.) m kg 0.8 0.9 1 1 1.1 1.3Frame size 2 NG 6 8 11 13 16 19 22Displacement V g maxcm³ 6.5 8.2 11 13.3 16 18.9 22Operating pressure, continuous p maxbar 210 210 210 210 210 210 180Operating pressure, intermittent p maxbar 250 250 250 250 250 250 210Power 1) P kW 4 5.1 6.6 8 9.3 10.9 12.4Speed range n maxrpm 3600 3600 3600 3600 3600 3600 3000Weight (approx.) m kg 2.1 2.2 2.4 2.6 2.7 2.9 3.1Frame size 3 NG 20 22 25 32 40Displacement V g maxcm³ 20.6 22.2 25.4 32.5 40.5Operating pressure, continuous p maxbar 210 210 210 210 180Operating pressure, intermittent p maxbar 250 250 250 250 210Power 1) P kW 11.7 12.5 14.1 18.1 20Speed range n maxrpm 3600 3400 3200 3000 2500Weight (approx.) m kg 3.3 3.7 4.1 4.5 4.9

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics25PumpsInternal gear pumps• Sizes NG5 to 50• Frame sizes 2, 3 and 4 (component series 2X)• High-pressure pump with very low operating noise• High efficiency at low speed due to sealing gap compensation• Combination of several pumps is possible, even vane pumps and axial piston pumpsType PGHFrame size 2 NG 5 6.3 8Displacement V g maxcm³ 5.2 6.5 8.2Operating pressure, continuous p maxbar 315 315 315Operating pressure, intermittent p maxbar 350 350 350Power 1) P kW 4.6 5.6 7.2Speed n minrpm 600 600 600n maxrpm 3000 3000 3000Weight (approx.) m kg 4.3 4.4 4.6Frame size 3 NG 11 13 16Displacement V g maxcm³ 11 13 16Operating pressure, continuous p maxbar 315 315 315Operating pressure, intermittent p maxbar 350 350 350Power 1) P kW 9.1 11.2 13.5Speed n minrpm 600 600 600n maxrpm 3000 3000 3000Weight (approx.) m kg 4.8 5 5.3Frame size 4 NG 20 25 32 40 50Displacement V g maxcm³ 20.1 25.3 32.7 40.1 50.7Operating pressure, continuous p maxbar 315 315 315 315 315Operating pressure, intermittent p maxbar 350 350 350 350 350Power 1) P kW 13 16.5 21 25 33Speed n minrpm 200 200 200 200 200n maxrpm 3000 3000 3000 3000 3000Weight (approx.) m kg 14 14.5 15 16 17Detailed information:RE 102231)At maximum continuousoperating pressure andn = 1450 rpm.Industrial Technologies

PumpsИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 2926 Hydraulics Bosch Rexroth AGInternal gear pumpsDetailed information:RE 102271)At maximum continuousoperating pressure andn = 1450 rpm.• Sizes NG20 to 250• Frame sizes 4 and 5 (unit 3X)• High-pressure pump with very low operating noise• High efficiency at low speed due to sealing gap compensation• All frame sizes and sizes can be combined with each other• Can be combined with vane pumps and axial piston pumpsType PGHIndustrial TechnologiesFrame size 4 NG 20 25 32 40 50Displacement V g maxcm³ 20.1 25.3 32.7 40.1 50.7Operating pressure, continuous p maxbar 315 315 315 315 315Operating pressure, intermittent p maxbar 350 350 350 350 350Power 1) P kW 13 16.5 21 25 33Speed n minrpm 200 200 200 200 200n maxrpm 3000 3000 3000 3000 3000Weight (approx.) m kg 14 14.5 15 16 17Frame size 5 NG 63 80 100 125 160 200 250Displacement V g maxcm³ 64.7 81.4 100.2 125.3 162.8 200.4 250.5Operating pressure, continuous p maxbar 315 315 315 315 210 170 135Operating pressure, intermittent p maxbar 350 350 350 350 260 210 170Speed n minrpm 200 200 200 200 200 200 200n maxrpm 3000 3000 3000 3000 3000 3000 3000Weight (approx.) m kg 42 43.5 45.5 48 52 55.5 60.5

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics27PumpsVane pumps, fixed displacement• Sizes NG18 to 193• Frame sizes 1 to 5• Low operating noise• Good efficiency• Long bearing life through hydraulic relief of the shaft• Also available as double pump• Can be combined with axial piston pumps and internal gear pumpsType PVV, PVQFrame size 1 NG 18 27 36 40 46Displacement V g maxcm³ 18 27 36 40 46Operating pressure,Type PVV p maxbar 210 210 210 160 140continuousType PVQ p maxbar 210 210 210 160 140Power 1) P kW 11 16 21 18 18Speed Type PVV n maxrpm 1800 1800 1800 1800 1800Type PVQ n maxrpm 2700 2700 2700 2700 2700Weight (approx.) m kg 12 12 12 12 42Frame size 2 NG 40 45 55 60 68Displacement V g maxcm³ 40 45 55 60 68Operating pressure,Type PVV p maxbar 175 175 175 175 175continuousType PVQ p maxbar 210 210 210 210 210Power Type PVV P hydkW 19 22 26 28 31Type PVQ P hydkW 22 26 32 34 37Speed Type PVV n maxrpm 1800 1800 1800 1800 1800Type PVQ n maxrpm 2700 2700 2500 2500 2500Weight (approx.) m kg 14.8 14.8 14.8 14.8 14.8Frame size 4 NG 69 82 98 113 122Displacement V g maxcm³ 69 82 98 113 122Operating pressure,Type PVV p maxbar 175 175 175 175 175continuousType PVQ p maxbar 210 210 210 210 210Power Type PVV P hydkW 31 33 45 50 55Type PVQ P hydkW 38 45 55 60 65Speed Type PVV n maxrpm 1800 1800 1800 1800 1800Type PVQ n maxrpm 2500 2500 2500 2400 2400Weight (approx.) m kg 23 23 23 23 23Detailed information:RE 10335Industrial TechnologiesFrame size 5 NG 139 154 162 183 193Displacement V g maxcm³ 139 154 162 183 193Operating pressure,Type PVV p maxbar 175 175 175 175 175continuousType PVQ p maxbar 175 175 175 175 175Power 1) P kW 69 75 80 90 95Speed Type PVV n maxrpm 1800 1800 1800 1800 1800Type PVQ n maxrpm 2200 2200 2200 2200 2200Weight (approx.) m kg 34 34 34 34 341)At maximum continuousoperating pressure andn = 1450 rpm.

PumpsИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 2928 Hydraulics Bosch Rexroth AGVane pumps, pilot operatedDetailed information:RE 105151)At maximum continuousoperating pressure andn = 1450 rpm.• Sizes NG14 to 150• Variable displacement• Low operating noise• Pressure and flow can be controlled• Low hysteresis• Very short control times• Can be combined with internal gear, external gear, axial piston and radial piston pumpsType PV7Frame size 10 10 16 16 25 25Size NG 14 20 20 30 30 45Displacement V g maxcm³ 14 20 20 30 30 45Operating pressure p maxbar 160 100 160 80 160 80Power 1) P kW 6.3 5.8 10 7.1 13.7 10.5Speed n rpm 900 to 1800Weight (approx.) m kg 12.5 12.5 17 17 21 21Frame size 40 40 63 63 100 100Size NG 45 71 71 94 118 150Displacement V g maxcm³ 45 71 71 94 118 150Operating pressure p maxbar 160 80 160 80 160 80Power 1) P kW 20.5 17 34 22 54 35Speed n rpm 900 to 1800Weight (approx.) m kg 30 30 37 37 56 56Vane pumps, direct operated• Sizes NG10 to 25• Variable displacement• Very short control times• Low operating noise• Low zero stroke powerIndustrial TechnologiesType PV7...ADetailed information:RE 105221)At maximum continuousoperating pressure andn = 1450 rpm.Frame size 6 6 20 20Size NG 10 14 20 25Displacement V g maxcm³ 10 14 20 25Operating pressure p maxbar 100 70 100 100Power 1) P kW 2.5 2.7 5 6Speed n rpm 900 to 1800Weight (approx.) m kg 6.3 6.3 11.4 11.4

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics29PumpsRadial piston pumps, fixed displacement• Sizes NG0.4 to 2.0• Radial piston pump with 3 pistons• Very compact build• Self-priming, valve-controlled• Long service life due to hydro-dynamically lubricated plain bearings• Optional combination with variable displacement vane pumpsType PR4-MiniSize NG 0,4 0,63 1 1,6 2Displacement V g maxcm³ 0.4 0.63 1 1.6 2Operating pressure p maxbar 700 700 450 250 175Power 1) P kW 0.66 1.15 1.14 1.06 0.86Speed n rpm 3400 3000 2000 2000 2000Weight (approx.) m kg 2.6 2.6 2.6 2.6 2.6Radial piston pumps, fixed displacement• Sizes NG1.6 to 20.0• Radial piston pump with 3, 5 or 10 pistons• Self-priming, valve-controlled• Long bearing life due to hydro-dynamically lubricated plain bearings• Optional combination with variable displacement vane and axial piston pumpsType PR4Size 1,6 2,0 2,5 3,15 4,0 6,3 8,0Displacement V g maxcm³ 1.51 2.14 2.59 3.57 4.32 7.14 8.63Operating pressure p maxbar 700 700 700 700 700 700 700Power 1) P kW 2.9 4.1 4.9 6.8 8.1 13.6 16.1Speed n rpm 1000 to 2000Weight (approx.) m kg 9.2 9.2 9.2 12.4 12.4 16.4 16.4Detailed information:RE 112601)At maximum continuousoperating pressure andn = 1450 rpm.Detailed information:RE 11263Industrial TechnologiesSize 3,15 5,0 6,3 8,0 10,0 16,0 20,0Displacement V g maxcm³ 3.39 4.82 5.83 8.03 9.71 16.07 19.43Operating pressure p maxbar 500 500 500 500 500 500 500Power 1) P kW 4.7 6.7 7.9 10.9 12.9 21.2 25.3Speed n rpm 1000 to 2000Weight (approx.) m kg 9.2 9.2 9.2 12.4 12.4 16.4 16.41)At maximum continuousoperating pressure andn = 1450 rpm.

PumpsИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 2930 Hydraulics Bosch Rexroth AGPump combinations• Fixed displacement pump + fixed displacement pump• Variable displacement pump + fixed displacement pump• Variable displacement pump + variable displacement pumpNumerous optional combinationsDetailed information:See data sheet of front pump• = Currently available‒ = Not availableMultiple combinations oninquiryFront pumpsRear pumpsPV7 PGH/PGF PR4 PR4-Mini AZP A10 PVV, PVQPV7 • • • • • • •PGH/PGF ‒ • ‒ • • • •PR4 ‒ ‒ ‒ ‒ • ‒ ‒AZP ‒ ‒ ‒ ‒ • ‒ ‒A10 ‒ • ‒ ‒ • • •Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29NotesMotorsAxial piston units External gear motors Radial piston motorsAxial piston units in swashplate andbent-axis design for medium andhigh-pressure ranges. Hydrostaticdrives for stationary applicationshave a long service life, low noiseemission and high efficiency values.Performance profile• Swept volume 5 to 1000 cm³• Nominal pressure up to 400 bar• Max. speed up to 10000 rpm• Torque up to 5570 NmExternal gear motors in 4 series(B, F, N, G) have different sweptvolumes classified by various gearwidths. Different motor designvariants, with different flanges,shafts, and built-on valves.Performance profile• Swept volume 2.5 to 45 cm³• Nominal pressure up to 280 bar• Max. speed up to 5000 rpm• Reversible motors for 2- and 4-quadrant operationIndustrial TechnologiesRadial piston motors of types MR..are externally pressurized hydraulicmotors with constant swept volume.The direction of rotation can beclockwise, anti-clockwise orreversible.Performance profile• Swept volume up to 3238.58 in 3• Max. speed up to 800 rpm• Continuous power up to 250 kW• Torque up to 32500 Nm

MotorsИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 2932 Hydraulics Bosch Rexroth AGFixed displacement motorsDetailed information:RE 91001• Sizes NG5 to 1000• Axial tapered piston bent-axis design• Open and closed circuits• Series 6• Counterbalance valve attachment possible• Option: integrated flushing and boost pressure valve• Suitable for pump operation in the closed circuit• Long-life bearing possible (sizes 250 to 1000)Type A2FMSize 5 10 12 16 23 28Nominal pressure p Nbar 315 400 400 400 400 400Peak pressure p maxbar 350 450 450 450 450 450Swept volume V gcm³ 4.93 10.3 12 16 22.9 28.1Speed n maxrpm 10000 8000 8000 8000 6300 6300Inlet flow q V maxl/min 49 82 96 128 144 176Torque Δp = 400 bar T Nm 24.7 65 76 100 144 178Weight (approx.) m kg 2.5 5.4 5.4 5.4 9.5 9.5Size 32 45 56 63 80 90Nominal pressure p Nbar 400 400 400 400 400 400Peak pressure p maxbar 450 450 450 450 450 450Swept volume V gcm³ 32 45.6 56.1 63 80.4 90Speed n maxrpm 6300 5600 5000 5000 4500 4500Inlet flow q V maxl/min 201 255 280 315 360 405Torque Δp = 400 bar T Nm 204 290 356 400 508 572Weight (approx.) m kg 9.5 13.5 18 18 23 23Size 107 125 160 180 200 250Nominal pressure p Nbar 400 400 400 400 400 350Peak pressure p maxbar 450 450 450 450 450 400Swept volume V gcm³ 106.7 125 160.4 180 200 250Speed n maxrpm 4000 4000 3600 3600 2750 2700Inlet flow q V maxl/min 427 500 577 648 550 625Torque Δp = 400 bar T Nm 680 796 1016 1144 1272 ‒Δp = 350 bar T Nm ‒ ‒ ‒ ‒ ‒ 1393Weight (approx.) m kg 32 32 45 45 66 73Industrial TechnologiesTorque NG5 at Δp = 315barSize 355 500 710 1000Nominal pressure p Nbar 350 350 350 350Peak pressure p maxbar 400 400 400 400Swept volume V gcm³ 355 500 710 1000Speed n maxrpm 2240 2000 1600 1600Inlet flow q V maxl/min 795 1000 1136 1600Torque Δp = 350 bar T Nm 1978 2785 3955 5570Weight (approx.) m kg 110 155 322 336

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics33MotorsFixed displacement motors• Sizes NG18 to 63• Axial piston swashplate design• Open and closed circuits• Series 52• SAE version• Low noise emission and long service life• Optional: integrated coasting valve, e. g. for fan drivesType A10FMSize 18 23 28 37 45 58 63Nominal pressure p Nbar 280 280 280 280 280 280 280Peak pressure p maxbar 350 350 350 350 350 350 350Swept volume V gcm³ 18 23.5 28.5 36.7 44.5 58 63.1Speed n maxrpm 4200 4900 4700 4200 4000 3600 3400Inlet flow q V maxl/min 76 115 134 154 178 209 215Torque Δp = 280 bar T Nm 80 105 127 163 198 258 281Weight (approx.) m kg 6.5 12 12 17 17 22 22Detailed information:RE 91172At speed n max, a pressureof 18 bar is required on thelow pressure side.Industrial Technologies

MotorsИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 2934 Hydraulics Bosch Rexroth AGFixed displacement motorsDetailed information:RE 91120• Sizes NG22 to 500• Axial piston swashplate design• Open and closed circuits• Series 1 (size 71)• Series 3 (sizes 22 to 56 and sizes 125 to 500)• Small installation height• Operation with HF fluids possible with reduced technical data (sizes 71 to 500)Type A4FMSize 22 28 40 56Nominal pressure p Nbar 400 400 400 400Peak pressure p maxbar 450 450 450 450Swept volume V gcm³ 22 28 40 56Speed n maxrpm 4250 4250 4000 3600Inlet flow q V maxl/min 93 119 160 202Torque Δp = 400 bar T Nm 140 178 255 356Weight (approx.) m kg 11 11 15 21Size 71 125 250 500Nominal pressure p Nbar 350 350 350 350Peak pressure p maxbar 400 400 400 400Swept volume V gcm³ 71 125 250 500Speed n maxrpm 3200 2600 220 180Inlet flow q V maxl/min 227 325 550 900Torque Δp = 350 bar T Nm 395 696 1391 2783Weight (approx.) m kg 34 61 120 260Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics35MotorsVariable displacement motors• Sizes NG28 to 1000• Axial piston bent-axis design• Open and closed circuits• Series 6• Motor available as standard version (A6VM) or plug-in version (A6VE)• Wide control range (can be swiveled over zero)• High speeds and high torque• Optional: Counterbalance valve, flushing and boost pressure valve• A6VE: for compact installation into mechanical gearboxesType A6VM and A6VESize A6VM/A6VE 28 55 80 107 160 250Nominal pressure p Nbar 400 400 400 400 400 350Peak pressure p maxbar 450 450 450 450 450 400Swept volume V g maxcm³ 28.1 54.8 80 107 160 250Speed 1) at V g maxn maxrpm 5550 4450 3900 3550 3100 2700at V g< V g maxn maxrpm 8750 7000 6150 5600 4900 3600Inlet flow at n maxq V maxl/min 156 244 312 380 496 675Torque 2) Δp = 350 bar T Nm ‒ ‒ ‒ ‒ ‒ 1391Δp = 400 bar T Nm 179 349 509 681 1019 ‒Weight (approx.) m kg 16 26 34 47 64 90Size A6VM 140 200 355 500 1000Nominal pressure p Nbar 400 400 350 350 350Peak pressure p maxbar 450 450 400 400 400Swept volume V g maxcm³ 140 200 355 500 1000Speed 1) at V g maxn maxrpm 3250 2900 2240 2000 1600at V g< V g maxn maxrpm 5150 4600 2950 2650 2100Inlet flow at n maxq V maxl/min 455 580 795 1000 1600Torque 2) Δp = 350 bar T Nm ‒ ‒ 1978 2785 5571Δp = 400 bar T Nm 891 1273 ‒ ‒ ‒Weight (approx.) m kg 60 80 170 210 430Overview of control and adjustment devicesHD / EPHydr. control, pilot pressure-related/ el. controlwith proportional solenoidHZ / EZHydraulic / electrical twopointcontrolHAAutomatic control, highpressure-relatedDAHydr. control, speed-relatedDetailed information:A6VM: RE 91604A6VE: RE 916061)While adhering to q V max2)Torque at V g maxIndustrial Technologiesp St / Ip St / Ip BV g minV g maxV g minV g maxV g minV g maxp B= Operating pressurep St= Pilot pressureI = Control currentV g= Swept volume

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Motors 36 Hydraulics Bosch Rexroth AGTwo-speed motors• Sizes NG28 to 85• Axial piston swashplate design• Open and closed circuits• Series 5• Hydraulic or electrical two-point controlDetailed information:RE 91703At speed n max, a pressureof at least 18 bar is requiredon the low pressureside.V g= Swept volumep St= Pilot pressureI = Control currentType A10VMSize 28 45 63 85Nominal pressure p Nbar 280 280 280 280Peak pressure p maxbar 350 350 350 350Swept volume V g maxcm³ 28 45 62 87Speed at V g maxn maxrpm 4700 4000 3300 3100at V g minn maxrpm 5400 4600 3900 3560Inlet flow at n maxq V maxl/min 131.6 180 205 270Torque Δp = 280 bar T maxNm 125 200 276 387Weight (approx.) m kg 14 18 26 34Overview of control and adjustment devicesEZ1Electrical two-point controlIV g minV g maxHZHydraulic two-point controlp StV g minV g maxDGDirect-controlled two-pointcontrolIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics37MotorsExternal gear motors• Sizes NG2.5 to 45 (sizes 5 on request)• High pressures with small installation space and low weight• Wide speed ranges• Wide viscosity and temperature ranges• Reversible motors for 2- and 4-quadrant operation• Plain bearings for high loads• Consistently high quality owing to large-scale production• Many design variants availableType AZMSeries B, component series 2X NG 2.5 3 4 4.5 5 6 7Swept volume V gcm³ 2.5 3.15 4 4.5 5 6.3 7.1Max. continuous pressure p 1bar 250 250 250 250 250 225 200Max. starting pressure p 3bar 280 280 280 280 280 255 230Max. speed at p 1n rpm 5000 4000 4000 4000 4000 3500 3500Min. speed n rpm 750 750 750 750 750 750 750Series F, component series 1X NG 5 8 11 14 16 19 22Swept volume V gcm³ 5.5 8 11 14 16 19 22.5Max. continuous pressure p 1bar 250 250 250 250 250 180 180Max. starting pressure p 3bar 280 280 280 280 280 210 210Max. speed at p 1n rpm 4000 4000 3500 3000 3000 3000 3000Min. speed n rpm 500 500 500 500 500 500 500Series F, component series 2X NG 19 22 25 28Swept volume V gcm³ 19 22.5 25 28Max. continuous pressure p 1bar 250 220 195 170Max. starting pressure p 3bar 280 250 225 200Max. speed at p 1n rpm 3500 3500 3000 3000Min. speed n rpm 500 500 500 500Series G; component series 1X NG 22 28 32 38 45Swept volume V gcm³ 22.5 28 32 38 45Max. continuous pressure p 1bar 180 200 180 180 180Max. starting pressure p 3bar 210 230 210 210 210Max. speed at p 1n rpm 3000 3000 2800 2600 2600Min. speed n rpm 500 500 500 500 500Detailed information:RE 14026Industrial TechnologiesSeries N, component series 1X, 2X NG 20 22 25 28 32 36Swept volume V gcm³ 20 22.5 25 28 32 36Max. continuous pressure p 1bar 250 210 210 200 180 160Max. starting pressure p 3bar 280 240 240 230 210 190Max. speed at p 1n rpm 3000 3000 3000 3000 3000 3000Min. speed n rpm 500 500 500 500 500 500NG5, series F availableonly on inquiry

MotorsИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 2938 Hydraulics Bosch Rexroth AGRadial piston motorsDetailed information:RE 15228• Sizes NG33 to 8200• Smooth running even at very low speeds• High temperature shock resistance• Ideal for closed-loop controlled drives• Rolling bearings for extremely long service life• Very low operating noiseType MR, MREIndustrial TechnologiesSize (MR) 33 57 73 93 110 125 160 190Swept volume V gcm³ 32.1 56.4 72.6 92.6 109 124.7 160 192Operating pressure, p maxbar 250 250 250 250 250 250 250 250continuousPower p maxkW 10 17 20 25 28 25 30 36Speed n maxrpm 1400 1300 1200 1150 1100 900 900 850Torque T maxNm 103 195 310 380 445 550 720 870Weight (approx.) m kg 30 30 38 38 38 46 46 46Size (MR) 250 300 350 450 600 700 1100 1600Swept volume V gcm³ 251 304 349 452 608 707 1126 1598Operating pressure, p maxbar 250 250 250 250 250 250 250 250continuousPower p maxkW 48 53 62 75 84 97 119 144Speed n maxrpm 800 750 600 600 500 500 330 260Torque T maxNm 1120 1380 1560 2030 2720 3170 5100 7400Weight (approx.) m kg 50 50 77 77 97 97 140 209Size (MR) 1800 2400 2800 3600 4500 6500 7000Swept volume V gcm³ 1810 2393 2792 3637 4503 6460 6967Operating pressure, p maxbar 250 250 250 250 250 250 250continuousPower p maxkW 153 183 194 185 210 240 250Speed n maxrpm 250 220 215 180 170 130 130Torque T maxNm 8240 10650 12650 16350 20250 29450 32000Weight (approx.) m kg 209 325 325 508 508 800 800Size (MRE) 330 500 800 1400 2100 3100 5400 8200Swept volume V gcm³ 332.4 498 804 1369 2091 3104 5401 8226Operating pressure, p maxbar 210 210 210 210 210 210 210 210continuousPower p maxkW 49 70 93 102 148 190 210 250Speed n maxrpm 750 600 450 280 250 200 160 130Torque T maxNm 1250 1880 3020 5160 7850 11700 20600 32500Weight (approx.) m kg 50 77 97 145 221 329 512 810

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29NotesCylindersRexroth cylinders are characterizedby high quality and innovativeconcepts such as precisely guidedpiston rods in conjunction withadvanced sealing technology, selfadjustingor variable end positioncushioning and safety bleeding.Performance profile• Standard, industry-specific andproject-related cylinders• Operating pressures up to4000 bar• Installation dimensions accordingto ISO, DIN, NFPA, etc.• Piston diameter 25 to 1500 mm• Stroke length up to 944.88 in• Highly advanced seal systems• Integrated position measuringsystems• Integrated proximity switchesProximity switches and integratedposition measuring systems inconjunction with built-on controlblocks and high-response valvesallow the realization of completehydraulic axes.Industrial Technologies

CylindersИндастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 2940 Hydraulics Bosch Rexroth AGTie rod cylinders• Mounting of head and cap according to the tie rod principle• Service-friendly modular system• Small installation dimensions• Interchangeability due to standardization• Industry-specific and project-related cylinders on inquiryDetailed information:CD/CG/CST3...F: RE 17039CDT1: RA 17038CDT4: RA 17041CD/CG70: RE 17016CD/CG210: RE 17017HVBS/HVBD: RE 17047Mounting elements: RE 170421)Installation dimension acc.to ISO 6020/2, DIN 24554and NF/ISO 6020/22)Inst. dimensions acc. toNFPA3)acc. to CNOMOE05.22.815.NSeries CDT3…F 1) CGT3...F 1) CST3...FNominal pressure bar 160 160 160Piston Ø mm 25 to 200 25 to 200 40 to 200Piston rod Ø mm 12 to 140 12 to 140 28 to 140Mounting types 13 7 5Max. stroke length mm 2700 2700 2700Max. stroke speed m/s 0.5 0.5 0.5Series CD70 2) CG70 2) CD210 2)Nominal pressure bar 70 70 210Piston Ø mm 25 to 200 25 to 200 40 to 200Piston rod Ø mm 12 to 140 12 to 140 16 to 140Mounting types 16 9 16Max. stroke length mm 3000 3000 3000Max. stroke speed m/s 0.5 0.5 0.5Series CG210 2) HVBS 3) HVBD 3)Nominal pressure bar 210 200 200Piston Ø mm 40 to 200 25 to 125 25 to 125Piston rod Ø mm 16 to 140 16 to 70 16 to 70Mounting types 9 4 1Max. stroke length mm 3000 160 160Max. stroke speed m/s 0.5 0.2 0.2Series CDT1 2) CDT4 2)Nominal pressure psi 1500 3000Piston Ø inch 1.00 to 8.00 1.50 to 8.00Piston rod Ø inch 1.00 to 8.00 0.63 to 5.50Mounting types 18 19Max. stroke length inch 120 120Max. stroke speed inch/s 20 20Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics41CylindersMill type cylinders• Mill type design for applications even under extreme conditions• Service-friendly modular system• Various mounting types• Interchangeability due to standardization• Industry-specific and project-related cylinders on inquirySeries CDM1 1) CGM1 1) CSM1 1)Nominal pressure bar 160 160 160Piston Ø mm 25 to 200 25 to 200 40 to 200Piston rod Ø mm 14 to 140 14 to 140 28 to 140Mounting types 8 4 6Max. stroke length mm 3000 3000 3000Max. stroke speed m/s 0.5 0.5 0.5Series CDH1 2) CGH1 2) CDH2 2)Nominal pressure bar 250 250 250Piston Ø mm 40 to 320 40 to 320 40 to 320Piston rod Ø mm 22 to 220 22 to 220 25 to 220Mounting types 6 3 6Max. stroke length mm 6000 6000 6000Max. stroke speed m/s 0.5 0.5 0.5Series CGH2 2) CDH3 2) CGH3 2)Nominal pressure bar 250 350 350Piston Ø mm 40 to 320 40 to 320 40 to 320Piston rod Ø mm 25 to 220 28 to 220 28 to 220Mounting types 3 6 3Max. stroke length mm 6000 6000 6000Max. stroke speed m/s 0.5 0.5 0.5Series CDL1 2)Nominal pressure bar 160Piston Ø mm 25 to 200Piston rod Ø mm 14 to 110Mounting types 5Max. stroke length mm 3000Max. stroke speed m/s 0.5Detailed information:CDL1: RE 17325CD/CG/CSM1: RE 17329CD/CGH1: RE 17331CD/CGH2: RE 17334CD/CGH3: RE 17337Mounting elements: RE 170421)Installation dimensionsaccording to ISO 6020/12)Installation dimensionsaccording to Rexroth standardIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Notes 42 Hydraulics Bosch Rexroth AGIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29NotesOn/off valvesDirectional valvesFor applications in hydraulicsystems, we offer direct and pilotoperated directional valves withpressure-tight solenoids andhydraulic, pneumatic or mechanicalactuation.Performance profile• NG6 and 10, direct operated:Maximum operating pressure350 barMaximum flow 120 l/min• NG10 to 32, pilot operated:Maximum operating pressure350 barMaximum flow 1100 l/min• Porting pattern internationallystandardized• Numerous spool symbols andtypes of actuationPressure, flow and isolatorvalvesApart from pressure, flow control,isolator valves and pressureswitches, this product segmentalso includes accessories such assubplates.Performance profile• NG6 to 32 and valves for in-linemounting:Maximum operating pressure630 bar• Pressure valves:pressure relief valvespressure reducing valvesPressure sequencing andpressure cut-off valves• Flow control valves:Throttle valvesFlow control valves• Isolator valves:Check valvesPilot operated check valves2-way cartridge valvesIndustrial Technologies2-way cartridge valves are elementsdesigned for compact block designs.The power part is mounted in thecontrol block in a cavity standardizedin accordance with DIN ISO 7368and closed with a cover.Performance profile• NG16 to 160• Maximum operating pressure420 bar• Directional function• Pressure function

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves44 Hydraulics Bosch Rexroth AGCheck valves of sandwich plate designDetailed information:NG6: RE 21534NG10: RE 21536Detailed information:RE 20375• Sizes NG6 and 10• Porting pattern according to DIN 24340 form A and ISO 4401• Various isolating functions• Various cracking pressures• Size 6 (component series 4X):‒ Check valve made of carbon fiber-reinforced plastic‒ Improved tightness as compared with previous version with metal seal‒ Excellent compatibility with various hydraulic fluids• Size 10 (component series 3X): Optionally with• ‒ Metal seal ("-")• ‒ Soft seal ("W4") (Please note restrictions with regard to flow volume!)Type Z1SSize 6 10Operating pressure p maxbar 350 315Cracking pressure bar 0.5; 1.5; 3; 5 0.5; 3; 5Flow q V maxl/min 40 100Check valves• Sizes NG6 to 30• For threaded connection• Leak-free isolation in one direction• Various cracking pressures• Optional surface coating• Special media (e.g. emulsion, water) on requestType SSize 6 8 10 15 20 25 30Operating pressure p maxbar 315 315 315 315 315 315 315Cracking pressure bar Without spring; 0.5; 1.5; 3; 5Industrial TechnologiesFlow q V maxl/min 18 36 60 150 250 350 450

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics45On/off valvesCartridge check valves• Sizes NG6 to 30• For block installations:‒ Right-angled valve ("KE")‒ Straight valve ("KD")• Leak-free isolation in one direction• Plug screw with pipe thread or metric ISO thread• Various cracking pressures• Special media (e.g. emulsion, water) on requestType M-SRSize 6 8 10 15 20 25 30Operating pressure p maxbar 315 315 315 315 315 315 315Cracking pressure bar Without spring; 0.2; 0.5; 1.5; 3; 5Flow "KE" q V maxl/min ‒ 35 50 120 200 300 400"KD" q V maxl/min 15 30 50 120 200 300 400Detailed information:NG6 to 30: RE 20380NG52 to 150: on requestIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves46 Hydraulics Bosch Rexroth AGPiloted-to-open check valves in sandwich plate design• Sizes NG6 to 22• Porting pattern according to DIN 24340 form A and ISO 4401• For the leak-free isolation of one or two consumer ports• Various cracking pressures• With external actuation, optionalDetailed information:NG6: RE 21548NG10: RE 21553NG16: RE 21558NG22: RE 21564Detailed information:NG6: RE 21460NG10 to 32: RE 21468Type Z2SSize 6 10 16 22Component series 6X 3X 5X 5XOperating pressure p maxbar 315 315 315 315Cracking pressure bar 1.5; 3; 7 1.5: 3; 6; 10 3; 5; 7.5; 10 3; 5; 7.5; 10Flow q V maxl/min 60 120 300 450Hydraulically piloted-to-open check valves• Sizes NG6 to 32• For subplate mounting ("P"):‒ NG6: Porting pattern to ISO 4401‒ NG10 to 32: Porting pattern to ISO 5781• For threaded connection ("G") (NG10 to 32)• With optional external leakage oil port (NG6 to 10)• With optional pre-decompression (NG10 to 32)• Various cracking pressuresType SV and SLSize 6 10 16Component series 6X 4X 4XOperating pressure p maxbar 315 315 315Pilot pressure p Stbar 5 to 315 5 to 315 5 to 315Cracking pressure bar 1.5; 3; 7; 10 1.5: 3; 6; 10 2.5; 5; 7.5; 10Flow "G" q V maxl/min ‒ 150 350"P" q V maxl/min 60 150 ‒Industrial TechnologiesSize 20 25 32Component series 4X 4X 4XOperating pressure p maxbar 315 315 315Pilot pressure p Stbar 5 to 315 5 to 315 5 to 315Cracking pressure bar 2.5; 5; 7.5; 10 2.5; 5; 8; 10 2.5; 5; 8; 10Flow "G" q V maxl/min 350 550 550"P" q V maxl/min 350 ‒ 550

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics47On/off valvesPre-fill valves• Sizes NG32 to 160• Hydraulically piloted-to-open pre-fill valve (check valve) in sandwich plate design for:‒ Flanged connection‒ In-line installation• Optional:- Unloading via built-on directional valve (type ZSFW), some versions with HD port andpre-decompressionType ZSF and ZSFWSize 32 to 160Operating pressure p maxbar 350Pre-fill valves• Sizes NG25 to 100• Hydraulically piloted-to-open pre-fill valve (check valve) for:‒ Block installation ("P")‒ Integration into cylinders ("Z")• Matching cover type LFFType SFESize 25 to 100Operating pressure p maxbar 350Pre-fill valves, actively switching• Sizes NG200 to 300• Hydraulically active-switching pre-fill valve (check valve) for:‒ Flanged connection• Reduced switching noise due to integrated end position cushioningDetailed information:RE 20478Detailed information:RE 20745Industrial TechnologiesType SFSSize 200 to 300Operating pressure p maxbar 350Detailed information:RE 20473

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves48 Hydraulics Bosch Rexroth AGPre-fill valvesDetailed information:RE 20485Detailed information:RE 20482• Sizes NG25 to 80• Hydraulically piloted-to-open pre-fill valve (check valve)‒ For threaded connection (sizes 25 and 32)‒ For flanged connection (sizes 40 and greater)• For mounting directly onto the working cylinder• With or without pre-decompression• Integrated high-pressure portType SFASize 25 to 80Operating pressure p maxbar 350Pre-fill valves• Sizes NG125 to 500• Hydraulically piloted-to-open pre-fill valve (check valve) for:‒ Flanged connection ("A")‒ Tank installation ("B")‒ Block installation ("K")• With or without pre-decompression• Pressure ratings 420 and 500 bar on inquiry• Spool position monitoring on inquiryType SFSize 125 to 500Operating pressure p maxbar 350Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics49On/off valvesDirectional poppet valves, directly operated, with solenoid actuation• Sizes NG6 and 10• Porting pattern according to DIN 24340 form A and ISO 4401• Blocked port is leak-free closed• Solenoids with detachable coil• Pressure-tight chamber does not have to be opened for changing the coil (type SED)• Reliable switching when under pressure over longer periods of standstillType SED and SEWType SEDSize 6 10Operating pressure p maxbar 350 350Flow q V maxl/min 25 40Type SEWSize 6 10Operating pressure p maxbar 420/630 420/630Flow q V maxl/min 25 40Directional poppet valves, direct operated, with solenoid actuation,for water emulsion and water• Size NG6• Porting pattern according to ISO 4401• Blocked port is leak-free closed• Solenoids with detachable coil• Reliable switching when under pressure over longer periods of standstillType SESize 6Operating pressure p maxbar 420/630Flow q V maxl/min 25Detailed information:NG6Type SED: RE 22049Type SEW: RE 22058NG10Type SED: RE 22045Type SEW: RE 22075Detailed information:RE 22042Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves50 Hydraulics Bosch Rexroth AGDirectional poppet valves, direct operated with mechanical or fluidicactuationDetailed information:RE 22340Detailed information:NG12/2: RE 18136-203/2: RE 18136-21NG82/2: RE 18136-12• Sizes NG6 and 10• Manual lever operation (type SMM)• Roller plunger operation (type SMR)• Hydraulic operation (type SH)• Pneumatic operation (type SP)Type SMM, SMR, SH and SPSize 6 10Operating pressure p maxbar 420/630 420/630Flow q V maxl/min 25 40Directional poppet valves, direct operated, with solenoid actuation(high performance)• Sizes NG1 and 8• Leak-free isolation of closed port• Reliable switching even after longer periods of standstill• Wet-pin DC solenids• Turnable solenoid coil• With concealed manual override, optional (size 1)• Leak-free on both sidesType KSDER and KSDEUSize 1 1 8 8 1 1Version 2/2 2/2 2/2 2/2 3/2 3/2Type KSDER KSDEU KSDER KSDEU KSDER KSDEUOperating pressure p maxbar 350 500 350 500 350 500Flow q V maxl/min 20 12 5 3 12 6Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics51On/off valvesDirectional poppet valves, pilot operated, with solenoid actuation• Sizes 06, 10A, 12A, 16A and 16• Leak-free isolation of closed port• Isolating on one or on both sides• UNF installation spaceType VEISize 06 10A 12A 16A 16Operating pressure p maxbar 350 350 350 350 350Flow q V maxl/min 40 70 150 200 260Shut-off valves in sandwich plate design• Sizes NG6 to 25• Directional spool valve, direct or pilot operated• Porting pattern according to ISO 4401• Functioning as shut-off through valve or shut-off short-circuit through valve• Electrohydraulic actuation (type Z4WEH), hydraulic actuation (type Z4WH)• Wet-pin DC solenoidType Z4WEH, Z4WH and Z4WETypes Z4WEH and Z4WHSize 10 16 25Operating pressure p maxbar 315 315 315Flow q V maxl/min 160 300 650Type Z4WESize 6Operating pressure p maxbar 315Flow q V maxl/min 50Detailed information:RE 00162-02Detailed information:NG6Type Z4WE: RE 23193NG10Types Z4WEH and Z4WH:RE 24753NG16Types Z4WEH and Z4WH:RE 24761NG25Types Z4WEH and Z4WH:RE 24768Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves52 Hydraulics Bosch Rexroth AGDirectional spool valves, direct operated, with solenoid actuationDetailed information:NG61)RE 231642)RE 231783)RE 231834)RE 23178-00NG103)RE 231835)RE 233276)RE 23351• Sizes NG6 to 10• For subplate mounting: Porting pattern according to DIN 24340 form A and ISO 4401• Wet-pin AC or DC solenoids• Solenoids with detachable coil• Electrical connection as individual connection or central connection• Optional spool position monitoring (RE 24830)• Smooth switching characteristics 3)Type WESize 6 6 6 6VersionStandardvalve (DCsolenoidonly) 1)Heavy-dutyvalve 2)Smoothlyswitchingvalve 3)Reducedelectricalpower consumption(8 W) 4)Operating pressure p maxbar 315 350 350 315Flow q V maxl/min 60 80 60 60Size 10 10 10VersionSmoothlyswitchingvalve 3)Standardvalve 5)5-chamberversion (DCsolenoidonly) 6)Operating pressure p maxbar 315 315 315Flow q V maxl/min 100 120 120Directional spool valves, direct operated, with solenoid actuation(high performance)• Sizes NG1 and 8• Fluid can flow through the valves in both directions• Positive overlap prevents switching shocks• Wet-pin DC solenids• Turnable solenoid coil• With concealed manual override, optionalIndustrial TechnologiesType KKDERDetailed information:NG12/2: RE 18136-063/2: RE 18136-044/2: RE 18136-05Size 1 1 1 8 8Version 2/2 3/2 4/2 2/2 3/2Operating pressure p maxbar 350 350 350 350 350Flow q V maxl/min 55 60 40 45 30NG82/2: RE 18136-083/2: RE 18136-09

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves54 Hydraulics Bosch Rexroth AGDirectional spool valves, direct operated, with mechanical or manualactuationDetailed information:NG6: RE 22280NG10: RE 22331NG16 and 32: RE 22371• Sizes NG6 to 32• Porting pattern according to DIN 24340 form A and ISO 4401• Optional spool position monitoring (RE 24830)• Operation by means of‒ Manual lever (type WMM)‒ Roller plunger (type WMR, WMRZ, WMU)‒ Rotary knob (type WMD)‒ Rotary knob, lockable (type WMDA)Size 6 10 16Type ‒ ‒ H-WMMOperating pressure p maxbar 315 350 350Flow q V maxl/min 60 120 300Size 22 32Type H-WMM H-WMMOperating pressure p maxbar 350 350Flow q V maxl/min 450 1100Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics55On/off valvesDirectional spool valves, pilot operated, with electrohydraulicactuation• Sizes NG10 to 102• Porting pattern according to DIN 24340 form A and ISO 4401• Wet-pin AC or DC solenoids• Spring and/or pressure return of the main spool to its initial position• Spring centering (NG10)• Spring or pressure centering (sizes 16, 25 and 32)• Optional auxiliary operating device• Electrical connection as individual connection or central connection• Optional switching time adjustment• Stroke limitation of the main spool, optional• Stroke limitation and/or end position control (NG16, 25 and 32), optional• Optional spool position monitoring (RE 24830)• Preload valve in the P channel of the main valve for sizes 16, 25 and 32Type H-4WEHSize 10 16 (22) 25 32TypeH-4WEH,4WEHH-4WEH,4WEHH-4WEH,4WEHH-4WEHH-4WEH,4WEHOperating pressure p maxbar 350/280 350/280 350/280 350 350/280Flow q V maxl/min 160 300 450 650 1100Size 52 62 82 102Type H-4WEH H-4WEH H-4WEH H-4WEHOperating pressure p maxbar 350 350 350 350Flow q V maxl/min 2000 3000 4500 7000Spool position monotoring for directional valves• Sizes NG6 to 32• For directional poppet valves type SED, SEW, SH, SP, SMM and SMR• For diectional spool valves type WE, Z4WE, WMM, WMR, WH, WP, WEH and Z4WEH• Inductive position switch and proximity sensors• Direct monitoring of the spool position• High reliability• Long service lifeDetailed information:NG10 to 32: RE 24751NG52 to 102: On inquirySpool position monitoring:RE 24830Industrial TechnologiesSize 6 10 16 25 32Operating pressure p maxbar 350 350 350 350 350Flow q V maxl/min 80 160 300 350 1100Detailed information:RE 24830NG52 to 102: on request

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves56 Hydraulics Bosch Rexroth AGPressure relief valves in sandwich plate design, direct operatedDetailed information:RE 25722Detailed information:NG4: RE 25710NG6 to 30: RE 25402• Sizes NG6 and 10• Porting pattern according to ISO 4401• 3 pressure ratings: 80, 160, 315 bar• 5 pressure relief functions:‒ A - T, P - T, B - T, A - T as well as B - T, A - B and B - A• 2 optional adjustment types:– Sleeve with hexagon– Lockable rotary knob with scaleType ZDBY and Z2DBYSize 6 10Operating pressure p maxbar 315 315Flow q V maxl/min 60 120Pressure relief valves, direct operated• Sizes NG4 to 30• For subplate mounting ("P")• For threaded connection ("G")• As cartridge valve ("K")• Type-tested safety valves in accordance with Pressure Equipment Directive 97/23/EC• 3 optional adjustment types:‒ Sleeve with hexagon socket and protective cap‒ Rotary knob / hand wheel‒ Lockable rotary knobType DBDSize 4 6 8 10Version "K" "P,G,K" "G" "P,G,K"Operating pressure p maxbar 500 400 400 630Flow q V maxl/min 20 50 120 120Industrial TechnologiesSize 15 20 25 30Version "G" "P,G,K" "G" "P,G,K"Operating pressure p maxbar 400 400 315 315Flow q V maxl/min 250 250 330 330

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics57On/off valvesPressure relief valves, direct operated• Size NG6• For subplate mounting• As sandwich plate valve (type ZDBT)• Use as pilot control valve• 5 optional adjustment types:‒ Hand wheel and locknut‒ Square bolt with locknut‒ Square bolt with locknut and protective cap‒ Lockable rotary knob with scale‒ Rotary knob with scaleType DBTSize 6Operating pressure p maxbar 315Flow q V maxl/min 3Pressure relief valves, direct operated• Size NG6• For subplate mounting• 3 optional adjustment types:– Sleeve with hexagon– Lockable rotary knob with scale‒ Rotary knob with scaleType DBSize 6Operating pressure p maxbar 315Flow q V maxl/min 60Detailed information:RE 25724Detailed information:RE 25408Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves58 Hydraulics Bosch Rexroth AGPressure relief valves, direct operated, with mechanical actuation(standard performance)Detailed information:RE 18105-01Detailed information:NG6: RE 25751NG10: RE 25761• Size NG0• High power density• Various pressure ratings: 75, 150, 250, 350 bar• Versatile use for simple pressure limitation functionType KBDSize 0Operating pressure p maxbar 350Flow q V maxl/min 40Pressure relief valves in sandwich plate design, pilot operated• Sizes NG6 and 10• Porting pattern according to DIN 24340 form A and ISO 4401• 4 pressure ratings: 50, 100, 200, 315 bar• 5 pressure relief functions:‒ A - T, P - T, B - T, A - T as well as B - T, A - B and B - A• 4 optional adjustment types:‒ Rotary knob‒ Sleeve with hexagon and protective cap‒ Lockable rotary knob with scale‒ Rotary knob with scaleType ZDB and Z2DBSize 6 10Operating pressure p maxbar 315 315Flow q V maxl/min 60 100Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics59On/off valvesPressure relief valves, pilot operated• Size NG6• For subplate mounting: Porting pattern according to ISO 6264• 2 optional adjustment types:– Sleeve with hexagon– Lockable rotary knob with scaleType DBVSize 6Operating pressure p maxbar 315Flow q V maxl/min 60Pump safety blocks, pilot operated• Sizes NG16 to 32• For direct mounting to the SAE pressure port of the pump• Zero-pressure start-up and circulation of the pump• Solenoid-operated unloading via built-on directional spool valve or directional poppet valve• Electrical monitoring of the set pressure• Proportional pressure limitation and unloading using external or integral control electronics• Type-tested safety valves in accordance with Pressure Equipment Directive 97/23/ECType DBA, DBAW and DBAESize 16 25 32Operating pressurep maxbar 350 350 350Flow q V maxl/min 300 400 400Detailed information:RE 25726Detailed information:RE 25890Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves60 Hydraulics Bosch Rexroth AGPump safety blocks, pilot operatedDetailed information:RE 25880• Sizes NG32 and 40• For direct mounting to the SAE pressure port of the pump• Zero-pressure start-up and circulation of the pump• With integrated check valve, optional• Solenoid-operated unloading via built-on directional spool valve or directional poppet valve• Switching shock damping, optional (type DBAW only)• Type-tested safety valves in accordance with Pressure Equipment Directive 97/23/EC• 4 optional adjustment types:‒ Rotary knob‒ Sleeve with hexagon and protective cap‒ Lockable rotary knob with scale‒ Rotary knob with scaleType DBA and DBAWSize 32 40Operating pressurep maxbar 350 350FlowWithout check q V maxl/min 600 650valveWith checkvalveq V maxl/min 350 450Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics61On/off valvesPressure relief valves, pilot operated• Sizes NG6 to 30• For subplate mounting ("P"): Porting pattern according to ISO 6264• For block installation ("C")• For threaded connection ("G")• For flanged connection ("F")• As cartridge valve ("K")• Solenoid-operated unloading via built-on directional spool valve or directional poppet valve• Switching shock damping, optional (type DBAW only)• Type-tested safety valves in accordance with Pressure Equipment Directive 97/23/EC• 4 optional adjustment types:‒ Rotary knob‒ Sleeve with hexagon and protective cap‒ Lockable rotary knob with scale‒ Rotary knob with scaleType DB and DBWSize 10 15 20 25 30Component series 5X 5X 5X 5X 5XOperating pressure p maxbar 350 350 350 350 350Flow "P" q V maxl/min 250 ‒ 500 ‒ 650"G" q V maxl/min 250 500 500 500 650"C" q V maxl/min 215 ‒ ‒ ‒ 650Size 6 10 10 15 20Component series 4X 4X 4X 4X 4XOperating pressure p maxbar 315 315 350 350 350Flow "K" q V maxl/min 60 100 ‒ ‒ ‒"P" q V maxl/min ‒ ‒ 200 ‒ 400"G" q V maxl/min ‒ ‒ 150 300 300Size 20 52Component series 1X 3XOperating pressure p maxbar 350 315Flow "K" q V maxl/min 300 ‒"P" q V maxl/min ‒ 2000"F" q V maxl/min ‒ 2000Detailed information:Component series 5XNG10 to 30: RE 25802Component series 4XNG6 and 10 ("K"): RE 25731NG10, 15, 20: RE 25818Component series 3XNG52: RE 25850Component series 1XNG20: RE 25818Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves62 Hydraulics Bosch Rexroth AGPressure-reducing valves in sandwich plate design, direct operatedDetailed information:NG6: RE 26570NG10: RE 26585Detailed information:NG6: RE 26564NG10: RE 26580• Sizes NG6 and 10• Porting pattern according to DIN 24340 form A and ISO 4401• Pressure reduction in channel A, B or P• 4 pressure ratings: 25, 75, 150, 210 bar• 4 optional adjustment types:‒ Rotary knob‒ Sleeve with hexagon and protective cap‒ Lockable rotary knob with scale‒ Rotary knob with scale• Check valve, optionalType ZDR.DSize 6 10Component series 4X 5XOperating pressure p maxbar 210 210Flow q V maxl/min 50 80Pressure-reducing valves, direct operated• Sizes NG6 and 10• Porting pattern‒ NG6 according to DIN 24340 form A and ISO 4401‒ NG10 according to ISO 5781• 5 pressure ratings: 25, 75, 150, 210, 315 bar• 4 optional adjustment types:‒ Rotary knob‒ Sleeve with hexagon and protective cap‒ Lockable rotary knob with scale‒ Rotary knob with scale• Check valve, optionalType DR.DPSize 6 10Component series 5X 4XSecondary pressure, adjustable p maxbar 315 210Flow q V maxl/min 60 80Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics63On/off valves2-way pressure-reducing valves, direct operated (high-performance)• Size NG2• Mounting cavity according to R/ISO 7789-27-01-1-98• 3 pressure ratings: 100, 210, 315 bar• Versatile use for simple pressure-reducing functions without leakage oil drainType KRDSize 2Component seriesOperating pressure p maxbar 400Secondary pressure, adjustable p maxbar 315Flow q V maxl/min 25Pressure-reducing valves, direct operated, with pressure monitoring• Size NG6• For subplate mounting ("P"): Porting pattern according to DIN 24340 form A and ISO 4401• As sandwich plate valve ("Z")• Clamping pressure adjustment and monitoring in a single unit• Common adjustment for clamping and monitoring pressure• Pressure monitoring, internal or optionally external on consumer• Adjustable switching distance between reduced pressure and monitored pressure• Limitation of the max. monitored pressure and secondary pressureType DRHD and ZDRHDSize 6Operating pressure p maxbar 200Secondary pressure, adjustable p maxbar 100Flow q V maxl/min 40BDetailed information:RE 18111-03Detailed information:RE 26576Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves64 Hydraulics Bosch Rexroth AGPressure reducing valves in sandwich plate design, pilot operatedDetailed information:RE 26861Detailed information:RE 26868• Size NG10• Porting pattern according to ISO 4401• Pressure reduction in channel A, B or P• 4 pressure ratings: 50, 100, 200, 315 bar• 4 optional adjustment types:‒ Rotary knob‒ Sleeve with hexagon and protective cap‒ Lockable rotary knob with scale‒ Rotary knob with scale• Check valve, optionalType ZDRSize 10Operating pressure p maxbar 315Flow q V maxl/min 100Pressure reducing valves in sandwich plate design, pilot operated• Size NG10• Porting pattern according to ISO 4401• Pressure reduction in channel A, B or P• 4 pressure ratings: 30, 80, 160, 315 bar• Pressure gauge connection• 2 optional adjustment types:– Sleeve with hexagon socket– Lockable rotary knob with scale• Check valve, optionalType ZDRYSize 10Operating pressure p maxbar 315Flow q V maxl/min 120Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics65On/off valvesPressure reducing valves, pilot operated• Sizes NG10 and 16• For subplate mounting ("P"): Porting pattern according to ISO 4401• 4 pressure ratings• 4 optional adjustment types:‒ Rotary knob‒ Sleeve with hexagon and protective cap‒ Lockable rotary knob with scale‒ Rotary knob with scaleType 3DRSize 10 16Operating pressure p maxbar 315 250Flow q V maxl/min 120 2203-way pressure reducing valves, direct operated (high-performance)• Size NG1• Mounting cavity R/KTV.1• 4 pressure ratings: 50, 100, 210, 315 bar• Versatile use for pressure-reducing functions• Low control deviations in the p-q VcharacteristicsType KTVSize 1Component seriesOperating pressure p maxbar 350Secondary pressure, adjustable p maxbar 315Flow q V maxl/min 100ADetailed information:NG10: RE 26915NG16: RE 26928Detailed information:RE 18111-02Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves66 Hydraulics Bosch Rexroth AGPressure reducing valves, pilot operatedDetailed information:Component series 3XNG10 ("K"): RE 26850Component series 4XNG10 and 25: RE 26893Component series 5XNG10 to 32: RE 26892• Sizes NG10 to 32• For subplate mounting ("P"): Porting pattern to ISO 5781• For block installation ("C")• For threaded connection ("G")• As cartridge valve ("K")• 4 pressure ratings: 50, 100, 200, 315 bar• 4 optional adjustment types:‒ Rotary knob‒ Sleeve with hexagon and protective cap‒ Lockable rotary knob with scale‒ Rotary knob with scale• Optional check valve ("P only")Type DRSize 10 10 25Component series 3X 4X 4XSecondary pressure, adjustable p maxbar 315 315 315Flow "P" q V maxl/min ‒ 80 160"G" q V maxl/min ‒ 80 160"K" q V maxl/min 100 80 160Size 10 15 20Component series 5X 5X 5XSecondary pressure, adjustable p maxbar 350 350 350Flow "P" q V maxl/min 150 ‒ 300"G" q V maxl/min 150 300 300Size 25 32Component series 5X 5XSecondary pressure, adjustable p maxbar 350 350Flow "P" q V maxl/min ‒ 400"G" q V maxl/min 400 400"C" q V maxl/min ‒ 400Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics67On/off valvesPressure sequencing valves, direct operated• Sizes NG6 and 10• Porting pattern‒ NG6 according to DIN 24340 form A and ISO 4401‒ NG10 according to ISO 5781• 4 optional adjustment types:‒ Rotary knob‒ Sleeve with hexagon and protective cap‒ Lockable rotary knob with scale‒ Rotary knob with scale• Check valve, optionalType DZ.DSize 6 10Sequencing pressure p maxbar 315 210Flow q V maxl/min 60 80Pressure sequencing valves, pilot operated• Sizes NG10 to 32• For subplate mounting ("P"): Porting pattern to ISO 5781• For block installation ("C")• Suitable for use as preload, sequencing and changeover valve• 4 optional adjustment types:‒ Rotary knob‒ Sleeve with hexagon and protective cap‒ Lockable rotary knob with scale‒ Rotary knob with scale• Check valve, optionalType DZSize 10 25 32Version "P" "P" "P,C"Sequencing pressure p maxbar 315 315 315Flow q V maxl/min 200 400 600Detailed information:NG6: RE 26076NG10: RE 26099Detailed information:RE 26391Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves68 Hydraulics Bosch Rexroth AGPressure cut-off valves, pilot operated (high-performance)Detailed information:RE 18107-01Detailed information:NG6: RE 26404NG10, 5, : RE 26411• Size NG2• Mounting cavity R/KAV.2• 4 pressure ratings: 50, 100, 210, 315 bar• High switching capacity• Infinitely variable switching pressure differential• Pilot unit with main spool• Hexagon with protective capType KAVSize 2ComponentAseriesOperating pressurep maxbar 350Flow q V maxl/min 140Pressure cut-off valves, pilot operated• Sizes NG6 to 30• For subplate mounting ("P"): Porting pattern according to ISO 4401• For block installation ("C")• As cartridge valve ("K")• Solenoid-operated unloading via built-on directional valve (sizes 10, 20, 30)• 4 optional adjustment types:‒ Rotary knob‒ Sleeve with hexagon and protective cap‒ Lockable rotary knob with scale‒ Rotary knob with scaleType DASize 6 10 25 32Version "P, K" "P" "P" "P, C"Component4X 5X 5X 5XseriesCut-off pressure p maxbar 315 315 315 315Flow q V maxl/min 30 ‒ ‒ ‒Switching pressureq V maxl/min ‒ 40 80 120diff. 10 %Switching pressurediff. 17 %q V maxl/min ‒ 60 120 240Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics69On/off valvesThrottle check valves in sandwich plate design• Sizes NG6 to 25• Porting pattern according to DIN 24340 form A and ISO 4401• For limiting the main or pilot flow of one or two consumers• Meter-in or meter-out throttling• 4 optional adjustment types:– Setscrew with locknut– Lockable rotary knob with scale‒ Rotary knob with scale‒ Spindle with hexagon socket and scaleType Z2FSSize 6 10 16 25Operating pressurep maxbar 315 315 350 350Flow q V maxl/min 80 160 250 360Throttle valves in sandwich plate design• Sizes NG6 and 10• Porting pattern according to ISO 4401• For limiting the main or pilot flow of two consumer ports• Adjustment type:‒ Spindle with hexagon socketType Z.FGSize 6 10Operating pressurep maxbar 315 315Flow q V maxl/min 70 160Detailed information:NG6: RE 27506NG10: RE 27518NG16: RE 27526NG25: RE 27536Detailed information:NG6: RE 27510NG10: RE 27524Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves70 Hydraulics Bosch Rexroth AGThrottle valves and throttle check valvesDetailed information:NG6 to 30: RE 27219NG52 to 102: On inquiryDetailed information:NG5 and 10: RE 27761NG6: RE 27763• Sizes NG6 to 102• For in-line installation• Related to pressure and viscosity• Type MG: Throttling in both directions of flow• Type MK: Throttling in only one direction of flow, free flow in the opposite direction (crackingpressure 0.5 bar)Type MG and MKSize 6 8 10 15 20 25Operating pressurep maxbar 315 315 315 315 315 315Flow q V maxl/min 15 30 50 120 200 300Size 30 52 62 82 102Operating pressurep maxbar 315 315 315 315 315Flow q V maxl/min 400 700 1100 1800 3000Fine throttle• Sizes NG5 to 10• For subplate mounting• For threaded connection (NG5 und 10)• For block installation (NG5 und 10)• Lockable rotary knob (NG5 and 10)• Hexagon socket with counter nut (NG6)Type FSize 5 6 10Operating pressurep maxbar 210 315 210Flow q V maxl/min 20 60 80Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics71On/off valves2-way flow high response valves in sandwich plate design• Size NG6• Porting pattern according to DIN 24340 form A and ISO 4401• With flow control in channel A, B, A and B or T (P)Type Z2FRMSize 6Operating pressureP maxbar 315Flow q V maxl/min 322-way flow control valves• Sizes NG6 to 16• For subplate mounting:‒ NG6: Porting pattern according to DIN 24340 Form A and ISO 4401‒ NG10 und 16: Porting pattern according to ISO 6263• Manual actuation (type 2FRM)• Hydraulic actuation (type 2FRH)• Electrohydraulic actuation (type 2FRW)• Flow control in both directions through rectifier sandwich plate, optional (type Z4S)• Stroke limitation of the toothed piston drive that can be adjusted on both ends (types 2FRHand 2FRW)• With actual value potentiometer for continuous monotoring of the throttle orifice setting,optional (type 2FRH and 2 FRW)• With external closure of the pressure compensator, optional (size 6)• Check valve, optional (size 6)• Pressure compensator stroke limitation for reducing start-up jumps, optional (sizes10 and 16)Type 2FRM, 2FRH and 2FRWDetailed information:RE 28164Industrial TechnologiesSize 6 10 16Type 2FRM 2FRM, 2FRH,2FRW2FRM, 2FRH,2FRWOperating pressureP maxbar 315 315 3151)Pilot pressure p Stbar ‒ 315 315Flow q V maxl/min 32 50 160Detailed information:NG6: RE 28163NG10 and 16: RE 283891)NG6 with rectifier sandwichplate up to 210 bar

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves72 Hydraulics Bosch Rexroth AG2-way flow control valves• Sizes NG6 and 10• As cartridge valve ("K")• With integrated check valve• Low start-up jumpDetailed information:RE 28155Detailed information:NG6: RE 28163NG10 and 16: RE 28389Type 2FRM.KSize 6 10Operating pressureP maxbar 315 210Flow q V maxl/min 32 60Rectifier sandwich plates (Graetz circuit) for combination with flowcontrol valves• Sizes NG6 to 16• For ensuring a rectified flow through a built-on flow control valve• Can be used for supply and return flowType Z4SSize 6 10 16Component1X 3X 2xseriesOperating pressurep maxbar 210 315 315Flow q V maxl/min 32 50 160Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics73On/off valves2-way cartridge valves with directional function• Sizes NG16 to 160• Standardized installation according to DIN ISO 7368 (up size 100)• Standard area ratios 2:1 and 14.3:1• "High flow" as a standard• Valve poppet with and without damping nose• Various cracking pressures• Control cover, optionally with‒ Integrated poppet/shuttle valve‒ Build-on possibility for directional poppet/spool valve or combination‒ Limit switch monitoring‒ Stroke limitation• Variable fitting of nozzles• Shaft sealing, optional• High-pressure version on request• Special media (e.g. emulsion, water) on requestType LC..A, LC..B (cartridge) and LFA (control cover)Size 16 25 32 40 50Operating pressure 1) p maxbar 420 420 420 420 420Flow 2) q V maxl/min 320 800 1300 2200 2900Size 63 80 100 125 160Operating pressure 1) p maxbar 420 420 420 420 420Flow 2) q V maxl/min 4000 6200 10600 16000 25000Detailed information:RE 210101)Depending on variant2)∆p ≈ 10 bar, withoutdamping noseIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29On/off valves74 Hydraulics Bosch Rexroth AG2-way cartridge valves with pressure functionDetailed information:RE 210501)Poppet plunger ("E")2)Directional spool ("D")3)Poppet/spool plunger ("E")• Sizes NG16 to 100• Standardized installation according to DIN ISO 7368• Implementation of unloading, isolating and pressure relief, pressure reducing and pressuresequencing functions possible• Installation kit optionally with‒ Poppet‒ Poppet/spool plunger‒ Directional spool• Manual and/or electrical-proportional pressure adjustment possible‒ Integrated in the control cover‒ Separate pilot control valve‒ Various combination options• Various cracking pressures• Pressure ratings ranging from 25 to 400 (420) bar (depending on the pilot control valve)• Various adjustment elements for manual pressure adjustment• Variable fitting of nozzles• Shaft sealing, optional• High-pressure version on request• Special media (e.g. emulsion, water) on requestType LC..D.: (cartridge) and type LFA..DB (control cover)Type LC..DB (cartridge) and type LFA..DB (control cover)Size 16 25 32 40 50 63 80 100Operating pressure p maxbar 420 420 420 400 400 400 400 400Flow 1) q V maxl/min 250 400 600 1000 2000 2500 5500 9500Type LC..DR (cartridge) and type LFA..DB (control cover)Size 16 25 32 40 50 63 80Operating pressure p maxbar 315 315 315 315 315 315 315Flow 2) q V maxl/min 150 300 450 1000 1300 2000 2800Type LC..DB (cartridge) and type LFA..DR (control cover)Size 16 25 32 40Operating pressure p maxbar 315/350 315/350 315/350 315/350Flow 3) q V maxl/min 175 320 500 700Size 50 63 80 100Operating pressure p maxbar 315/350 315/350 315/350 315/350Flow 3) q V maxl/min 1400 1750 3200 4900Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29NotesProportional, high-response and servovalvesProportional valves High-response valves Servo-valvesProportional valves are used asdirectional, pressure and flow controlvalves. Using integrated electronics(OBE), they reduce the cablingeffort and simplify handling whileoffering exact reproducibility and lowmanufacturing tolerances.Performance profile• Sizes 6 to 52• Flow up to 2800 l/min• Maximum operating pressure350 bar• Proportional solenoid withposition control• Rugged electronics for stationaryand mobile applicationsHigh-response valves are compactand robust. They are convincingin their high dynamics and controlaccuracy with closed-loop controlof position, velocity, pressure andforce.Performance profile• Sizes NG6 to 160• Flow up to 18000 l/min• Maximum operating pressure420 bar• Integral electronics, also ascomplete axis controller withcontrol functionsIndustrial TechnologiesServo-valves are hydraulically pilotoperated2- or 3-stage directionalvalves. Because of their highdynamics they are used predominantlyfor the closed-loop controlsof position, force or pressure, andvelocity.Performance profile• Sizes NG6 to 32• Flow up to 1800 l/min• Maximum operating pressure315 bar• Integral electronics

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves76 Hydraulics Bosch Rexroth AGProportional directional valves, direct operated, without electricalposition feedbackDetailed information:RE 29055• Sizes NG6 and 10• Porting pattern according to ISO 4401• Control of the direction and magnitude of a flow• Proportional solenoid operation• Spring-centered control spool• Different spool overlaps possible• Integral electronics (OBE) for type 4WRAEType 4WRA and 4WRAESize 6 10Operating pressure Ports A, B, P p maxbar 315 315Nominal flow Δp = 10 bar q V noml/min 7, 15, 30 30, 60Maximum hysteresis% 5 5Step response 0 to 90 % T u+T gms < 40 < 140Operating voltage OBE U V 24 24Comm. value signal OBE U V ±10 ±10I mA 4 to 20 4 to 20Control electronics Type 4WRA Card, analog VT-VSPA2-1Card, digitalVT-VSPD-1Module, analogVT-MSPA2-1Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics77 Proportional, high-response and servo-valvesProportional directional valves, direct operated, with electricalposition feedback• Sizes NG6 and 10• Porting pattern according to ISO 4401• Control of the direction and magnitude of a flow• Proportional solenoid operation• Spring-centered control spool• Different spool overlaps possible• Integral electronics (OBE) for type 4WREEType 4WRE and 4WREESize 6 10Operating pressure Ports A, B, P p maxbar 315 315Nominal flow Δp = 10 bar q V noml/min 8, 16, 32 25, 50, 75Maximum hysteresis% 0.1 0.1Step response 0 to 90 % T u+T gms 20 40Operating voltage OBE U V 24 24Comm. value signal OBE U V ±10 ±10I mA 4 to 20 4 to 20Control electronics Type 4WRE Card, analog VT-VRPA2-1 VT-VRPA2-24/3-way versionCard, digitalVT-VRPD-2Module, analog VT-MRPA2-1 VT-MRPA2-24/2-way version Card, analog VT-MRPA1-1 VT-MRPA1-2Proportional directional valves, direct operated, with integratedelectronics (OBE), electrical position feedback and spool positionmonitoring• Sizes NG6 and 10• Porting pattern according to ISO 4401• Control of the direction and magnitude of a flow• Proportional solenoid operation• Spring-centered control spool• Optional deadband compensationDetailed information:RE 29061Industrial TechnologiesType 4WREEMSize 6 10Operating pressure Ports A, B, P p maxbar 315 315Nominal flow Δp = 10 bar q V noml/min 4, 8, 16, 32 25, 50, 75Maximum hysteresis% ≤0.1 ≤0.1Step response 0 to 90 % T u+T gms 20 40Operating voltage OBE U V 24 24Comm. value signal OBE U V ±10 ±10Detailed information:RE 29064

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves78 Hydraulics Bosch Rexroth AG4/3 proportional directional valve with integral digital electronics andfield bus interface (IFB-P)Detailed information:RE 29048• Sizes NG6 and 10• Porting pattern according to ISO 4401• Control of the direction and magnitude of a flow• Analog or bus interface for command value• Field bus connection‒ CAN bus with CANopen protocol DS408‒ PROFIBUS DP V0/V1• Quick start-up via PC and commissioning softwareType 4WREFSize 6 10Operating pressure Ports P, A, B p maxbar 315 315Nominal flow Δp = 10 bar q V noml/min 8, 16, 32 25, 50, 75Maximum hysteresis% ≤0.1 ≤0.1Operating voltage OBE U V 24 24Comm. value signal OBE U V ±10 ±10I mA 4 to 20 4 to 20fieldbusCAN-Bus,PROFIBUS DP2/2 proportional directional valves, direct operated (highperformance)• Size 1• Direct operated proportional valve for controlling the magnitude of a flow• Actuation by proportional solenoid with central thread and detachable coil• Turnable solenoid coil• Flow in both directionsType KKDSCAN-Bus,PROFIBUS DPIndustrial TechnologiesDetailed information:RE 18139-06Frame size 1 1Version N PComponent series B BOperating pressure p maxbar 350 350Nominal flow 1 → 2 q V noml/min 38 32Maximum hysteresis2 → 1 q V noml/min 34 45% 5 5Step response 0 to 100 % T u+T gms < 65 < 65100 to 0 % T u+T gms < 65 < 65Control electronics Card, analog VT-MSPA1-100Connector,analogVT-SSPA1-100

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics79 Proportional, high-response and servo-valvesProportional directional valves, pilot operated, without electricalposition feedback• Sizes NG10 to 52• Porting pattern according to ISO 4401• Control of the direction and magnitude of a flow• Pilot control via 3-way pressure reducing valve• Spring centering and anti-rotation feature of the main spool• Different spool overlaps possible• Integral electronics (OBE) for type 4WRZEType 4WRH, 4WRZ and 4WRZESize 10 16 25 32 52Operating pressure Port P p maxbar 315 350 350 350 350Nominal flow Δp = 10 bar q V noml/min 25, 50,85100, 150 220, 325 360, 520 1000Maximum hysteresis% 6 6 6 6 6Step response 0 to 90 % T u+T gms 40 70 90 170 450Operating voltage OBE U V 24 24 24 24 24Comm. value signal OBE U V ±10 ±10 ±10 ±10 ±10I mA 4 to 20 4 to 20 4 to 20 4 to 20 4 to 20Control electronics Type 4WRZ Card, analog VT-VSPA2-1Card, digitalVT-VSPD-1Module, analog VT 11118Detailed information:RE 29115Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves80 Hydraulics Bosch Rexroth AGProportional directional valve, pilot operated, without electricalposition feedback, with position indicationDetailed information:RE 29117(in preparation)• Sizes NG10 to 25• Porting pattern according to ISO 4401• Control of the direction and magnitude of a flow• In connection with contacted switch-off, meets the requirements for safety-relevant parts ofa controller according to category 1, EN ISO 13849-1:2006• Suitable for use in safety-relevant parts of controls of category 4, EN ISO 13849-1:2006• Integral electronics (OBE) for type 4WRZEMType 4WRHM, 4WRZM, 4WRZEMSize 10 16 25Operating pressure Port P p maxbar 315 350 350Nominal flow Δp = 10 bar q V noml/min 25, 50, 85 100, 150 220, 325Maximum hysteresis% 6 6 6Operating voltage OBE U V 24 24 24Comm. value signal OBE U V ±10 ±10 ±10I mA 4 to 20 4 to 20 4 to 20Control electronics Type 4WRZM Card, analog VT-VSPA2-1Card, digitalVT-VSPD-1Module, analog VT 11118Proportional directional valve, pilot operated, without electricalposition feedback, with position indication• Size NG32• Porting pattern according to ISO 4401• Control of the direction and magnitude of a flow• Suitable for use in safety-relevant parts of controls of category 4, EN ISO 13849-1:2006• Integral electronics (OBE) for type 4WRZE...402Type 4WRH...402, 4WRZ...402, 4WRZE...402Industrial TechnologiesDetailed information:RE 29118(in preparation)Size 32Operating pressure Port P p maxbar 350Nominal flow Δp = 10 bar q V noml/min 360, 520Maximum hysteresis% 6Operating voltage OBE U V 24Comm. value signal OBE U V ±10I mA 4 to 20Control electronics Type 4WRZ...402 Card, analog VT-VSPA2-1Card, digitalVT-VSPD-1Module, analog VT 11118

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics81 Proportional, high-response and servo-valvesProportional directional valves, pilot operated, with integralelectronics (OBE) and electrical position feedback• Sizes NG10 to 35• Porting pattern according to ISO 4401• Control of the direction and magnitude of a flow• Pilot control via 3-way proportional directional valve without position feedback• Spring-centering of the main spoolType 4WRKESize 10 16 25 27 32 35Operating pressure p maxbar 315 350 350 210 350 350Nominal flow Δp = 10 bar q V noml/min 25, 50,100125,200220,350500 400,600Maximum hysteresis% 1 1 1 1 1 1Step response 0 to 90 % T u+T gms 20 30 50 50 80 120Operating voltage OBE U V 24 24 24 24 24 24Comm. value signal U V ±10 ±10 ±10 ±10 ±10 ±10I mA 4 to 20, ± 101000Detailed information:RE 29075Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves82 Hydraulics Bosch Rexroth AGProportional pressure relief valves, direct operatedDetailed information:RE 29162• Size NG6• Porting pattern according to DIN 24340 form A and ISO 4401• Valve for limiting a system pressure• Proportional solenoid operation• For subplate mounting• Linearized pressure/command value characteristic curve• Also available as screw-in cartridge valve• Integral electronics (OBE) for type DBETEType DBET and DBETESize 6Operating pressure p maxbar 420Flow q V maxl/min 2Maximum hysteresis %

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics83 Proportional, high-response and servo-valvesProportional pressure relief valves, direct operated,with position feedback• Size NG6• Porting pattern according to ISO 4401• Proportional solenoid operation• Adjustable by specifying the position of the solenoid armature• Integral electronics (OBE) for type DBETBEXType DBETSize 6 6Type DBETBX DBETBEXOperating pressure Port P p maxbar 315 315Port T p maxbar 2 250Flow q V maxl/min 2 2Maximum hysteresis % ≤0.3 ≤0.2Operating voltage OBE U V ‒ 24Comm. value OBE U V ‒ 0 to 10signalI mA ‒ 4 to 20Control electronics Type DBETBX Card, analog VT-VRPA1-537 VT-VRPA1-537Proportional pressure relief valves, direct operated(high-performance)• Size 8• Pilot valve• Direct operated valve for limiting a system pressure• Proportional solenoid operation• Proportional solenoid with central thread and detachable coil• Screw-in cartridge valve• Fine-balancing of the command value/pressure characteristic curve externally on thecontrol electronics• In the event of a power failure, the minimum set ("A") or maximum ("B") pressure will bereached.Detailed information:Type DBETBX: RE 29150Type DBETBEX: RE 29151Industrial TechnologiesType KBPSFrame size 8Component seriesOperating pressure p maxbar 420Flow q V maxl/min 2Maximum hysteresis % 4Step response 0 to 100 % T u+T gms < 70Control electronics100 to 0 % T u+T gms < 70Connector,VT-SSPA1-5analogADetailed information:Version "A": RE 18139-04Version "B": RE 18139-05

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves84 Hydraulics Bosch Rexroth AGProportional pressure relief valves, pilot operatedDetailed information:RE 29158• Size NG6• Porting pattern according to DIN 24340 form A and ISO 4401• Valve for limiting a system pressure• Proportional solenoid operation• For subplate mounting, types DBE and DBEE• Sandwich plate version, types ZDBE and ZDBEE• Linearized pressure/command value characteristic curve• Integral electronics (OBE) for types DBEE and ZDBEEType (Z)DBE and (Z)DBEESize 6Operating pressure p maxbar 315Flow q V maxl/min 30Maximum hysteresis % ±1.5Step response 10 to 90 % T u+T gms 8090 to 10 % T u+T gms 50Operating voltage OBE U V 24Comm. value OBE U V 0 to 10signalControl electronics Type (Z)DBE Card, analog VT-VSPA1-1Card, digitalVT-VSPD-1Module, analog VT 11131Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics85 Proportional, high-response and servo-valvesProportional pressure relief valves, pilot operated• Sizes NG10 to 32• Porting pattern according to DIN 24340 form E• Valve for limiting a system pressure• Proportional solenoid operation• For subplate mounting• Maximum pressure relief function with types DBEM and DBEME• Linearized pressure/command value characteristic curve (sizes 10 and 25)• Integral electronics (OBE) for types DBEE and DBEMEType DBE(M) and DBE(M)ESize 10 25 32Operating pressure p maxbar 350 350 350Flow q V maxl/min 200 400 600Maximum hysteresis % ±1.5 ±1.5 ±1.5Step response 0 to 100 % T u+T gms 150100 to 0 % T u+T gms 150Operating voltage OBE U V 24 24 24Comm. value OBE U V 0 to 10 0 to 10 0 to 10signalControl electronics Type DBE Card, analog VT-VSPA1-1 VT-VSPA1-1 VT-VSPA1-1Card, digital VT-VSPD-1 VT-VSPD-1 VT-VSPD-1Module, analog VT 11131 VT 11131 VT 11030Detailed information:NG10 and 25: RE 29160NG32: RE 29142Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves86 Hydraulics Bosch Rexroth AGPressure relief valves with direct current motor operation, pilotoperatedDetailed information:RE 29139• Sizes NG8 to 32• Porting pattern according to ISO 6264• For subplate mounting, threaded connection and block installation• Valve for limiting a system pressure• Direct current motor operation• With actual value potentiometer or limit switch• Self-locking in case of power failureType DBGSize 8 10 16Operating pressure p maxbar 315 315 315Flow q V maxl/min 100 200 200Maximum hysteresis % 5 5 5Control electronics Module, analog VT-VRM1-1 VT-VRM1-1 VT-VRM1-1Size 20 25 32Operating pressure p maxbar 315 315 315Flow q V maxl/min 400 400 600Maximum hysteresis % 5 5 5Industrial TechnologiesControl electronics Module, analog VT-VRM1-1 VT-VRM1-1 VT-VRM1-1

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics87 Proportional, high-response and servo-valvesProportional pressure relief valves, pilot operated• Sizes NG6 and 10• Porting pattern:‒ NG6: according to ISO 4401‒ NG10: according to ISO 5781-AG-06-2-A• Valve for limiting the system pressure• Proportional solenoid operation• Adjustable by specifying the position of the solenoid armature• Integral electronics (OBE) for type DBEBEType DBESize 6 6Type DBE6X DBEBE6XOperating pressure Port P p maxbar 315 315Port T p maxbar 250 250Flow q V maxl/min 40 40Maximum hysteresis % ≤4 ≤1Operating voltage OBE U V ‒ 24Comm. value OBE U V ‒ 0 to 10signalI mA ‒ 4 to 20Control electronics Type DBE Card, analog VT-VSPA1-‒508(525)Card, digital VT-VSPD-1 ‒Module, analogVT-MSPA1-‒508(525)Connector,analogVT-SSPA1-508(525)‒Size 10 10 10Type DBE10Z DBEB10Z DBEBE10ZOperating pressure Port P p maxbar 315 315 315Port T p maxbar 2 2 2Flow q V maxl/min 120 120 120Maximum hysteresis % ≤5 ≤1 ≤1Operating voltage OBE U V ‒ ‒ 24Comm. value OBE U V ‒ ‒ 0 to 10signalI mA ‒ ‒ 4 to 20Control electronics Type DBE Card, analog VT-VSPA1-508 VT-VSPA-537 ‒Module, analog VT-MSPA1-508 ‒ ‒Connector,analogVT-SSPA1-508 ‒ ‒Detailed information:NG6Type DBE6X: RE 29156Type DBEBE6X: RE 29159NG10Type DBE10Z: RE 29140Type DBEB10Z: RE 29141Type DBEBE10Z: RE 29163Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves88 Hydraulics Bosch Rexroth AGProportional pressure relief valves, pilot operated(high-performance)Detailed information:Version "A": RE 18139-08Version "B": RE 18139-07Detailed information:RE 29184• Size 3• Pilot operated valves for limiting a system pressure• Proportional solenoid operation• Proportional solenoid with central thread and detachable coil• Screw-in cartridge valve• In the event of a power failure, the minimum set ("A") or maximum ("B") pressure will bereached.Type KBVSFrame size 3Component seriesOperating pressure p maxbar 350Flow q V maxl/min 200Maximum hysteresis %

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics89 Proportional, high-response and servo-valvesProportional pressure reducing valves, pilot operated• Sizes NG6 and 10• Porting pattern according to DIN 24340 form A and ISO 4401• Valve for reducing a system pressure• Proportional solenoid operation• Types (Z)DRE 6 for subplate mounting and in sandwich plate design• Type ZDRE(E) 10 possible only in sandwich plate version• Linear pressure/command value characteristic curve• Integral electronics (OBE) for type ZDREE 10Type (Z)DRE 6 and ZDRE(E) 10Size 6 10Operating pressure p maxbar 210 315Flow q V maxl/min 30 80Maximum hysteresis % ±2 ±3Operating voltage OBE U V ‒ 24Comm. value OBE U V ‒ 0 to 10signalI mA ‒ 4 to 20Control electronics Type (Z)DRE Card, analog VT-VSPA1(K)-1 VT-VSPA1-11Card, digital VT-VSPD-1 VT-VSPD-1Module, analog VT 11132 VT-MSPA1-11Proportional pressure reducing valves, pilot operated• Sizes NG10 to 32• Position of the ports according to DIN 24340 form D• Valve for reducing a system pressure• Proportional solenoid operation• For subplate mounting• Linear pressure/command value characteristic curve• Maximum pressure relief function with types DREM and DREME• Optional check valve between ports A and B• Integral electronics (OBE) for types DREE and DREMEType DRE(M) and DRE(M)EDetailed information:NG6: RE 29175NG10: RE 29279Industrial TechnologiesSize 10 25 32Operating pressure p maxbar 315 315 315Flow q V maxl/min 200 300 300Maximum hysteresis % ±2.5 ±2.5 ±2.5Operating voltage OBE U V 24 24 24Comm. value OBE U V 0 to 10 0 to 10 0 to 10signalControl electronics Type DRE(M) Card, analog VT-VSPA1(K) VT-VSPA1(K) VT-VSPA1(K)Card, digital VT-VSPD-1 VT-VSPD-1 VT-VSPD-1Module, analog VT 11724 VT 11724 VT 11030Detailed information:NG10 and 25: RE 29176NG32: RE 29178

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves90 Hydraulics Bosch Rexroth AGProportional pressure reducing valves, pilot operatedDetailed information:NG6Type DRE6X: RE 29177Type DREB6X: RE 29182Type DREBE6X: RE 29195NG10Type DRE10Z: RE 29197Type DREB10Z: RE 29198Type DREBE10Z: RE 29199• Sizes NG6 and 10• Porting pattern:‒ NG6: according to ISO 4401‒ NG10: according to ISO 5781-AG-06-2-A• Valve for reducing a system pressure• Proportional solenoid operation• Adjustable by specifying the position of the solenoid armature• Integral electronics (OBE) for type DREBEType DRESize 6 6 6Type DRE6X DREB6X DREBE6XOperating pressure Port P p maxbar 315 315 315Port T p maxbar 250 250 250Flow q V maxl/min 40 40 40Maximum hysteresis % ≤4 ≤1 ≤1Operating voltage OBE U V ‒ ‒ 24Comm. value OBE U V ‒ ‒ 0 to 10signalI mA ‒ ‒ 4 to 20Control electronics Type DRE Card, analog VT-VSPA1-508 VT-VRPA1-527 ‒Module, analog VT-MSPA1-508 ‒ ‒Connector,analogVT-SSPA1-508 ‒ ‒Size 10 10 10Type DRE10Z DREB10Z DREBE10ZOperating pressure Port P p maxbar 315 315 315Port T p maxbar 2 2 2Flow q V maxl/min 120 120 120Maximum hysteresis % ≤5 ≤1 ≤1Operating voltage OBE U V ‒ ‒ 24Comm. value OBE U V ‒ ‒ 0 to 10signalI mA ‒ ‒ 4 to 20Control electronics Type DRE Card, analog VT-VSPA1-508 VT-VRPA1-537 ‒Module, analog VT-MSPA1-508 ‒ ‒Connector,analogVT-SSPA1-508 ‒ ‒Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics91 Proportional, high-response and servo-valvesProportional pressure reducing valves in 3-way version,pilot directed• Sizes NG10 and 16• Porting pattern according to DIN 24340 form A and ISO 4401• Valve for reducing a system pressure• Proportional solenoid operation• For subplate mounting• Integrated electronics (OBE) for type 3DREE and 3DREMEType 3DRE(M) and 3DRE(M)ESize 10 16Operating pressure p maxbar 350 315Flow q V maxl/min 125 300Maximum hysteresis % ±3 ±3Operating voltage OBE U V 24 24Comm. value OBE U V 0 to 10 0 to 10signalI mA 4 to 20 4 to 20Control electronics Type 3DRE(M) Card, analog VT-VSPA1-11 VT-VSPA1-11Card, digital VT-VSPD-1 VT-VSPD-1Module, analog VT-MSPA1-11 VT-MSPA1-11Proportional pressure-reducing valves, pilot operated, with directcurrent motor operation• Size NG6• Porting pattern according to ISO 4401• Valve for reducing a system pressure with pressure relief function• Direct current motor operation• For subplate mounting• As sandwich plate valve• Integrated pressure monitoring, optional• Self-locking in case of power failureType DRS and ZDRSDetailed information:RE 29286Industrial TechnologiesSize 6Operating pressure Port P p maxbar 210Flow q V noml/min 30Maximum hysteresis % ≤2Actuating time 0 to 100 % ms 500Control electronics Module, analog VT-MRMA1-1Detailed information:RE 29173

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves92 Hydraulics Bosch Rexroth AGPressure relief valves with direct current motor operation, pilotoperatedDetailed information:RE 29145• Sizes NG8 to 32• 4 pressure ratings per size• Position of the ports according to DIN 24340-D and ISO 5781• For subplate mounting, threaded connection and block installation• Valve for reducing a system pressure• Direct current motor operation• With actual value potentiometer or limit switch• Self-locking in case of power failureType DRGSize 8 10 16Operating pressure p maxbar 315 315 315Flow q V maxl/min 80 80 200Maximum hysteresis % 5 5 5Control electronics Module, analog VT-VRM1-1 VT-VRM1-1 VT-VRM1-1Size 20 25 32Operating pressure p maxbar 315 315 315Flow q V maxl/min 200 200 300Maximum hysteresis % 5 5 5Industrial TechnologiesControl electronics Module, analog VT-VRM1-1 VT-VRM1-1 VT-VRM1-1

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics93 Proportional, high-response and servo-valvesProportional throttle valves, pilot operated• Size NG16• Installation dimensions according to DIN ISO 7368-BA-06-2-A• 2-way version as cartridge valve• Orifice spool position is electrically position-controlled• Flow direction from A to B• Integral electronics (OBE) for type FEEType FE and FEESize 16Operating pressure Port P p maxbar 315Flow q V maxl/min 190Maximum hysteresis % ≤0.2Operating voltage OBE U V 24Comm. value signal OBE U V 0 to 10I mA 4 to 20Control electronics Type FE Card, analog VT-VRPA1-50Detailed information:RE 29202Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves94 Hydraulics Bosch Rexroth AGProportional throttle valves, pilot operatedDetailed information:RE 29209• Sizes NG25 to 63• Installation dimensions according to DIN ISO 7365• 2-way version as cartridge valve• Proportional solenoid operation• Can be used for pressure-compensated closed-loop flow control in conjunction with apressure compensator• Excellent dynamics and hysteresis, leakage-free isolation• Orifice spool position is electrically position-controlled• Flow characteristics optionally linear or progressive• Flow possible in both directions• Integral electronics (OBE) for type FESEType FES and FESESize 25 32 40 50 63Operating pressure p maxbar 315 315 315 315 315Flow Δp = 10 bar q V maxl/min 360 480 680 1400 1800Maximum response sensitivity % 0.1 0.1 0.1 0.1 0.1Maximum range of inversion % 0.15 0.15 0.15 0.15 0.15Step response 0 to 100 % T u+T gms 50 80 100 200 400100 to 0 % T u+T gms 70 120 160 250 500Operating voltage OBE U V 24 24 24 24 24Comm. value signal OBE U V 0 to 10 0 to 10 0 to 10 0 to 10 0 to 10Control electronics Type FES Card, analog VT-VRPA1-50I mA 4 to 20 4 to 20 4 to 20 4 to 20 4 to 20Module,analogIndustrial TechnologiesVT-VRPA1-51VT-VRPA1-51VT-VRPA1-52VT-VRPA1-52VT 11037 ‒ ‒ ‒ ‒

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics95 Proportional, high-response and servo-valvesProportional throttle valves, pilot operated• Sizes NG16 to 50• Installation dimensions according to DIN 24342 and ISO 7368• Proportional solenoid operation• Excellent dynamics and hysteresis, leak-free isolation• Main stage with position control• Flow characteristics, linear• Flow possible in both directions• Integral electronics (OBE) for type FESXEType FESX und FESXESize 16 25 32 40 50Operating pressure p maxbar 315 315 315 315 315Flow q V maxl/min 350 600 1000 1500 3000Maximum hysteresis % 0.2 0.2 0.2 0.2 0.2Step response 0 to 100 % T u+T gms < 70 < 70 < 90 < 90 < 110100 to 0 % T u+T gms < 70 < 70 < 90 < 130 < 300Operating voltage OBE U V 24 24 24 24 24Comm. value signal OBE U V 0 to 10 0 to 10 0 to 10 0 to 10 0 to 10Control electronics Type FESX Card, analog VT-VRPA1-527-2XProportional flow control valves, direct operated, 2-way version• Sizes NG6 to 16• Porting pattern:‒ NG6: according to DIN 24340 form A and ISO 4401‒ NG10 and 16: to DIN 24340 form G• Proportional solenoid operation• Valve with pressure compensator for pressure-compensated controlling of a flow• Metering orifice position-controlled via an inductive position transducer, with electricalposition control for the metering orifice• Flow control in both directions through rectifier sandwich plateType 2FREDetailed information:Type FESX: RE 29215Type FESXE: RE 29216Industrial TechnologiesSize 6 10 16Operating pressure p maxbar 210 315 315Flow Δp = 8 bar q V maxl/min 60 100 160Maximum hysteresis % ±1 ±1 ±1Step response 0 to 100 % T u+T gms 60 90 130100 to 0 % T u+T gms 70 100 90Control electronics Card, analog VT-VRPA1 - 150 VT-VRPA1 - 151 VT-VRPA1 - 151Module, VT-MRPA1 - 150 VT-MRPA1 - 151 VT-MRPA1 - 151analogDetailed information:NG6: RE 29188NG10 and 16: RE 29190

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves96 Hydraulics Bosch Rexroth AGProportional flow control valves, direct operated• Sizes NG6 and 10• Porting pattern according to ISO 4401• With or without position transducer• Integrated electronics (OBE) for type 3FREEZDetailed information:Type FREX: RE 29219Type FREZ: RE 29220Type FREEZ: RE 29221Type 3(2)FRE. and 3FREEZSize 6 10Operating pressure Port P p maxbar 250 250Flow q V maxl/min 35 80Maximum hysteresis % ≤1 ≤1Actuating time 0 to 100 % ms 25 35Operating voltage OBE U V 24 24Comm. value signal OBE U V 0 to 10 0 to 10Control electronics Type FREX Card, analog VT-VSPA1-525Module,VT-MSPA1-525analogConnector,VT-SSPA1-525analogType FREZ Card, analog VT-VRPA1-527Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics97 Proportional, high-response and servo-valvesHigh-response directional valves, direct operated, with electricalposition feedback• Sizes NG6 and 10• Porting pattern according to DIN 24340 form A and ISO 4401• Control of the direction and magnitude of a flow• Use for position, velocity and pressure control• Actuation through control solenoid• Position sensing of the control spool via an inductive position transducer• Characteristic curves with and without inflection• Spool and sleeve in in servo-type quality• Integral electronics (OBE) for type 4WRPEHType 4WRPH and 4WRPEHSize 6 10Operating pressure p maxbar 315 315Nominal flow Δp = 70 bar q V noml/min 2 to 40 50 to 100Maximum hysteresis %

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves98 Hydraulics Bosch Rexroth AGHigh-response directional valves, direct operated, with electricalposition feedbackDetailed information:RE 29041Detailed information:Type 4WRP: RE 29020Type 4WRP: RE 29022Type 4WRPE: RE 29024Type 4WRPE: RE 29025• Size NG6• Porting pattern according to DIN 24340 form A and ISO 4401• Control of the direction and magnitude of a flow• Use for closed-loop controls with high dynamics• Actuation through double-stroke control solenoid• Position sensing of the control spool via an inductive position transducer• Integral electronics (OBE)• Characteristic curves with and without inflectionType 4WRREHSize 6Operating pressure p maxbar 315Nominal flow Δp = 70 bar q V noml/min 8 to 40Maximum hysteresis %

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics99 Proportional, high-response and servo-valvesHigh-response directional valves, direct operated, with integralelectronics (OBE)• Sizes NG6 and 10• Porting pattern according to DIN 24340 form A and ISO 4401• Suitable for position and velocity control• Spool and sleeve in servo-type quality with type 4WRSEHType 4WRSE and 4WRSEHSize 6 10Operating pressure Ports P, A, B p maxbar 315 315Flow q V maxl/min 80 180Maximum hysteresis % ≤0.05 ≤0.05Operating voltage OBE U V 24 24Comm. value signal OBE U V ±10 ±10I mA 4 to 20 4 to 20Detailed information:Type 4WRSE: RE 29067Type 4WRSEH: RE 29069Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves100 Hydraulics Bosch Rexroth AGHigh-response directional valves with integrated axis controller andfield bus interfaceDetailed information:RE 29191• Sizes NG6 and 10• Integrated digital axis control functionality (IAC-R) for:‒ Flow control‒ Positon control‒ Pressure control‒ p/Q function‒ Alternating position/pressure and position/force controls‒ NC functionality• Analog and digital interfaces for command and actual values‒ 4 x analog sensors (±10 V or 4 to 20 mA) or‒ 1 x length measuring system (1Vss or SSI) and 2 analog sensors• Field bus connection‒ CAN bus with CANopen protocol DS408‒ PROFIBUS DP V0/V1• Quick start-up via PC and commissioning softwareType 4WRPNHSize 6 10Operating pressure Ports P, A, B p maxbar 315 315Flow q V maxl/min 40 100Maximum hysteresis % ≤0.2 ≤0.2Actuating time 0 to 100 % ms 10 25Operating voltage OBE U V 24 24Comm. value signal OBE U V ±10 ±10I mA 4 to 20 4 to 20fieldbusCAN-Bus,PROFIBUS DPCAN-Bus,PROFIBUS DPIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics101 Proportional, high-response and servo-valvesProportional directional valve, direct operated, with pQ functionality• Sizes NG6 and 10• Porting pattern according to ISO 4401• Integrated digital closed-loop control electronics (IAC-P) for:‒ Flow control‒ Pressure control• Analog interfaces for command and actual values• Field bus connection‒ CAN bus with CANopen protocol DS408‒ PROFIBUS DP V0/V1• Quick start-up via PC and commissioning softwareType STW0195 and STW0196Size 6 (STW0195) 10 (STW0196)Operating pressure Ports P, A, B p maxbar 250 250Nominal flow Δp = 5 bar q V noml/min 20 65Maximum hysteresis % ≤0.1 ≤0.1Operating voltage OBE U V 24 24Comm. value signal OBE U V ±10 ±10I mA 4 to 20 4 to 20fieldbusCAN-Bus,PROFIBUS DPCAN-Bus,PROFIBUS DPProportional directional valve, direct operated, with pQ functionality• Sizes NG6 and 10• Porting pattern according to ISO 4401• Integrated digital closed-loop control electronics (IAC-P) for:‒ Flow control‒ Pressure/force control• Analog interfaces for command and actual values• Integrated pressure sensor plate (optional)• Field bus connection‒ CAN bus with CANopen protocol DS408‒ PROFIBUS DP V0/V1• Quick start-up via PC and commissioning softwareDetailed information:RE 29014Industrial TechnologiesType 4WREQSize 6 10Operating pressure Ports P, A, B p maxbar 315 315Nominal flow Δp = 5 bar q V noml/min 3, 16, 32 25, 50, 75Maximum hysteresis % ≤0.1 ≤0.1Operating voltage OBE U V 24 24Comm. value signal OBE U V ±10 ±10I mA 4 to 20 4 to 20fieldbusCAN-Bus,PROFIBUS DPCAN-Bus,PROFIBUS DPDetailed information:RE 29050

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves102 Hydraulics Bosch Rexroth AGHigh-response directional valves, pilot operated, with electricalposition feedbackDetailed information:Type 4WRL: RE 29086Type 4WRL: RE 29087Type 4WRLE: RE 29088Type 4WRLE: RE 290891)At 100 bar2)Port diameter Ø50• Sizes NG10 to 35• Porting pattern according to DIN 24340 form A and ISO 4401• Control of the direction and magnitude of a flow• Use for force control, position control, velocity control and pressure control purposes• Pilot control valve and main stage are position-controlled• Characteristic curves with and without inflection• Integral electronics (OBE) for type 4WRLEType 4WRL and 4WRLESize 10 16 25 35 2)Operating pressure p maxbar 350 350 350 350Nominal flow Δp = 10 bar q V noml/min 55, 80 120, 200 370 1000Maximum hysteresis % 0.1 0.1 0.1 0.1FrequencyPhase response f Hz 45 45 50 20-90 °Operating voltage OBE U V 24 24 24 24Comm. value signal OBE U V ±10 ±10 ±10 ±10I mA 4 to 20 4 to 20 4 to 20 4 to 20Control electronics Type 4WRL...V Card, analog VT-VRRA1-527-20/V0/2STV,VT-VRRA1-527-20/V0/K40-AGC-2STVType 4WRL...E(W) Card, analog VT-VRRA1-527-20/V0/2STV,VT-VRPA1-527-20/V0/RTS-2STVHigh-response directional valves, pilot operated, with electricalposition feedback• Sizes NG10 to 25• Porting pattern according to DIN 24340 form A and ISO 4401• Control of the direction and magnitude of a flow• Use for closed-loop controls with high dynamics• Characteristic curves with and without inflection• Integral electronics (OBE)Industrial TechnologiesType 4WRVEDetailed information:RE 29077Size 10 16 25Operating pressure p maxbar 350 350 350Nominal flow Δp = 10 bar q V noml/min 55, 80 120, 200 370Maximum hysteresis % 0.1 0.1 0.1FrequencyPhase response f Hz 100 100 55-90 °Operating voltage OBE U V 24 24 24Comm. value signal OBE U V ±10 ±10 ±10

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics103 Proportional, high-response and servo-valvesHigh-response directional valves, pilot operated, with electricalposition feedback• Sizes NG10 to 25• Porting pattern according to DIN 24340 form A• Control of the direction and magnitude of a flow• Suitable for force, position, velocity and pressure control purposes• Pilot control via a 3-way high-response valve with position feedback• Self-centering of the main stage• Position sensing of the main spool via an inductive position transducer• Integral electronics (OBE)Type 4WRGESize 10 16 25Operating pressure p maxbar 315 350 350Nominal flow Δp = 10 bar q V noml/min 50, 100 125, 200 250, 350Maximum hysteresis % 0.1 0.1 0.1FrequencyPhase response f Hz 100 65 60-90 °Operating voltage OBE U V 24 24 24Comm. value signal OBE U V ±10 ±10 ±10I mA ±10 ±10 ±10Detailed information:RE 29070Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves104 Hydraulics Bosch Rexroth AGHigh-response directional valves, pilot operated, with electricalposition feedbackDetailed information:RE 29083• Sizes NG10 to 35• Porting pattern according to ISO 4401• Suitable for position, velocity, pressure and force control purposes• Integral electronics (OBE)Type 4WRTESize 10 16 25Operating pressure Ports P, A, B p maxbar 315 350 350Flow q V maxl/min 170 460 870Maximum hysteresis % ≤0.1 ≤0.1 ≤0.1Operating voltage OBE U V 24 24 24Comm. value signal OBE U V ±10 ±10 ±10I mA 4 to 20 4 to 20 4 to 20Size 27 32 35Operating pressure Ports P, A, B p maxbar 210 350 350Flow q V maxl/min 1000 1600 3000Maximum hysteresis % ≤0.1 ≤0.1 ≤0.1Operating voltage OBE U V 24 24 24Comm. value signal OBE U V ±10 ±10 ±10I mA 4 to 20 4 to 20 4 to 20High-response directional valves, pilot operated, with electricalposition feedback• Sizes NG10 to 25• Porting pattern according to ISO 4401• Main stage in servo-type quality• Flow characteristics‒ Progressive and fine-control edge ("M")‒ Inflected characteristic curve ("P")• Ruggedized designIndustrial TechnologiesType 4WRL...750Detailed information:RE 29084Size 10 16 25Operating pressure Ports P, A, B p maxbar 350 350 350Flow q V maxl/min 170 450 900Maximum hysteresis % ≤0.1 ≤0.1 ≤0.1Actuating time 0 to 100 % ms 25 40 45Control electronics Card, analog VT-VRRA1-527-20 / V0/2STV,VT-VRRA1-527-20 / V0/K40-AGC-2STV

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics105 Proportional, high-response and servo-valvesHigh-response directional valves, pilot operated, with electricalposition feedback• Sizes NG10 to 32• Porting pattern according to ISO 4401• Control of the direction and magnitude of a flow• Suitable for force, position, velocity and pressure control purposes• Pilot control via a 2-stage servo-valve• Position sensing of the main spool via an inductive position transducer• Integral electronics (OBE)Type 4WRDESize 10 16 25 27 32Operating pressure Port P 1) p maxbar 250 250 250 250 250Port P 2) p maxbar 315 350 350 350 350Port X 2) p maxbar 250 250 250 250 250Nominal flow Δp = 10 bar q V noml/min 50, 100 125, 200 220,350, 500500 600Maximum hysteresis % 0.2 0.2 0.2 0.2 0.2FrequencyPhase response f Hz 150 140 130 130 90-90 °Operating voltage OBE U V 24 24 +24 24 24Comm. value signal OBE U V ±10 ±10 ±10 ±10 ±10Detailed information:RE 290931)Internal pilot oil2)External pilot oilIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves106 Hydraulics Bosch Rexroth AGHigh-response directional valves (block installation), pilot operated,with integral electronics (OBE) and electrical position feedbackDetailed information:RE 29137• Sizes NG32 to 50• Component series 2X• Installation dimensions according to DIN ISO 7368 (type 2WRCE)• Suitable for position, velocity and pressure control purposes• Controlling via proportional valve• Robust design• Position sensing of the control spool via an inductive position transducer• Sizes 63 and 80 on requestType 2WRCE…/P and 3WRCE…/PSize 32 40 50Operating pressure 2-way p maxbar 420 420 420Nominal flow Δp = 5bar3-way p maxbar 315 315 3152-way q V noml/min 650 1000 16003-way q V noml/min 290 460 720Maximum hysteresis %

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics107 Proportional, high-response and servo-valvesHigh-response directional valves (block installation), pilot operated,with electrical position feedback• Sizes NG32 to 160• Installation dimensions to DIN ISO 7368 (type 2WRC)• Suitable for position, velocity and pressure control purposes• Controlling via servo-valve• Very short switching times, low hysteresis• Position sensing of the control spool via an inductive position transducer• Integral electronics (OBE) for type .WRCEType 2WRC(E)…/S and 3WRC(E)…/SSize 32 40 50 63Operating pressure 2-way p maxbar 420 420 420 420Nominal flow Δp = 5bar3-way p maxbar 315 315 315 3152-way q V noml/min 650 1000 1600 28003-way q V noml/min 290 460 720 1250Maximum hysteresis %

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Proportional, high-response and servo-valves108 Hydraulics Bosch Rexroth AG2-stage directional servo-valves, mechanical and electrical feedbackDetailed information:NG6: RE 29564NG10: RE 29583NG16: RE 295911)Command value signal,±25%pilot pressure 315 bar• Sizes NG6 to 16• Porting pattern according to DIN 24340 form A• Control of the direction and magnitude of a flow• Suitable for force, position, velocity and pressure control purposes• 1st stage nozzle/flapper plate amplifier• Dry torque motor• Wear-free connection of the spool to the feedback element• Position sensing of the main spool via an inductive position transducer for valves withelectrical feedback (size 10)• Integrated electronics (OBE) for type 4WSE2E.Type 4WS.2E.Size 6 10 16Operating pressure p maxbar 315 315 315Nominal flow Δp = 70 bar q V noml/min 2, 5, 10, 15, 20,2520, 30, 45, 60,75, 90100, 150, 200Maximum hysteresis % 1.5 1.5 1.5Corner frequency 1) Phase response -90 ° Hz 250 180 95Operating voltage OBE U V ±15 ±15 ±15Comm. value signal OBE U V ±10 ±10 ±10I mA ±10 ±10 ±10Control electronics Type 4WS2E. Card, analog VT-SR2 VT-SR2 VT-SR2Module,VT 11021 VT 11021 -analog3-stage directional servo-valves, electrical feedback• Sizes NG16 to 32• Porting pattern according to ISO 4401• Control of the direction and magnitude of a flow• Suitable for force, pressure or position control purposes• High response sensitivity, very low hysteresis and zero point drift• Position sensing of the main spool via an inductive position transducer• Integral electronics (OBE)Industrial TechnologiesType 4WSE3EDetailed information:NG16: RE 29620NG25: (in preparation)NG32: RE 296221)Command value signal,±25%pilot pressure 315 barSize 16 25 32Operating pressure p maxbar 350 315 315Nominal flow Δp = 70 bar q V noml/min 105, 150, 200,260300, 385, 455 500, 670, 890Maximum hysteresis % 0.1 0.1 0.1Corner frequency 1) Phase response -90 ° Hz 150 130 100Operating voltage U V 24/ ±15 24/ ±15 24/ ±15Comm. value signal U V ±10 ±10 ±10I mA ±10 ±10 ±10

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics109 Proportional, high-response and servo-valvesMeter-in pressure compensator, direct operated, sandwich platedesign• Sizes NG10 to 32• Porting pattern according to ISO 4401• For load compensation• For volume flow control in connection with proportional directional valveType ZDCSize 10 16 25 32Operating pressure p maxbar 350 350 350 350Flow q V maxl/min 85 150 325 520Meter-out check-Q-meter, sandwich plate design• Sizes NG10 to 32• Porting pattern according to ISO 4401• For load-compensated flow control• Brake valve function (type SCB only)Type SCA und SCBType SCASize 16 25 32Operating pressure p maxbar 315 315 350Flow q V maxl/min 130 325 700Type SCBSize 32Operating pressure p maxbar 315Flow q V maxl/min 700Detailed information:RE 29224Detailed information:NG16 and 25: RE 29247NG32: RE 29249Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Notes 110 Hydraulics Bosch Rexroth AGIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29NotesElectronicsAdjusted to the particular valvesystem, the appropriate analog ordigital amplifier cards in Eurocardformat as well as analog amplifiersin modular design and plug-in designare available for open or closed-loopcontrolled drives.Performance profile• Amplifiers for proportional, highresponseand servo-valves• Command value conditioningfor generating, linking andnormalizing signals• Open and closed-loop controllingof machine axes to be controlledin a closed loop• Sensors and signal transducersRexroth provides a unique, completeand scalable portfolio of digitalcontrol electronics ranging from1-axis controllers to high-performancemulti-axis controls. The lattercan be used to combine almost anynumber of axes with each otherthrough cross-communication.• Performance profile– Card holders and racks– Power supply technology– Test and service devices• Electrohydraulic systems– Closed-loop control systemswith axial piston pumps ascomplete units comprising pumpand electronicsThe integrated software takesaccount of the physical specialfeatures of the hydraulic system andallows start-up, parameterization anddiagnostics• Customer-specific solutionsin control and automationtechnologyIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics112 Hydraulics Bosch Rexroth AGAnalog amplifiers for proportional valves without electrical positionfeedback• Analog amplifiers in Eurocard format• Voltage stabilization, partially with raised measuring zero point• Command value inputs for voltage and current• Internal command value adjustment by means of 4 trimming potentiometers, call-up viarelays, with LED indicator lamp (on some versions)• Ramp generator, ramp times adjustable• Jump function for quickly passing through overlaps of directional valves• Enable input (on some versions)Technical dataOperating voltage U VDC 24Command value, depending on type U V 0 to 10, ±10I mA 4 to 20; 0 to 20Output amplifierCurrent-regulated, clockedType of connection32-pin or 48-pin male connectorCard dimensions mm Eurocard 100 x 160, DIN 41494Ambient temperature range ϑ °C 0 to +50 (+70)Detailed information: Type Suitable for valve typeRE 30110 VT-VSPA2-1-2X 4WRA...2X; 4WRZ...7XRE 30111 VT-VSPA1-1-1X DBE(M), (Z)DBE, (Z)DRE10, 3DRE(M)RE 30115 VT-VSPA1-2-1X DBET...6XRE 30109 VT-VSPA1-525.../RTP DBETX–...–25, DBE6X–...–25, DRE6X–...–25,DBE10Z-...-25, DRE10Z-...-25,2FREX6, 2FREX10, 3FREX6, 3FREX10,4WRBA..EARE 30109 VT-VSPA1-508.../RTP DBETX–...–8, DBE6X–...–8,DRE6X–...–8,DBE10Z–...–8, DRE10Z–...–8Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AGHydraulics113ElectronicsDigital amplifier for proportional valves without electrical positionfeedback• Digital amplifier in Eurocard format• Powerful microcontroller• Command value inputs for voltage and current• Ramp generator• Enable input and fault output• Free programmability of output stage frequency, biasing, step-change and final current,characteristic curve correction with a maximum of 8 interpolation points• Display (option) for diagnostics, as well as complete configuration and parameterization• Configuration and parameterization using PC software BODACTechnical dataOperating voltage U VDC 24Comm. value signal U V ±10I mA 4 to 20Output amplifierCurrent-regulated, clockedScanning time T m/s 2Serial interface RS 232Type of connection64-pin male connectorCard dimensions mm Eurocard 100 x 160, DIN 41494Ambient temperature range ϑ °C 0 to +50Type Suitable for valve type Detailed information:VT-VSPD-1-2X4WRA...2X4WRZ...5X to 7X(Z)DBE 6...1XDBE(M)T...5XDBE(M) 10(25)...5XDBE(M) 32...3XDBEP 6...1XDRE 4 K...3XDRE(M) 10(25)...5X(Z)DRE 6...1XZDRE 10...1X and 2X3DRE(M) 10(16) P...6X and 7XDRE(M) 32...4X3DREP 6...1X and 2XDBET 6...6XRE 30523Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics114 Hydraulics Bosch Rexroth AGAnalog amplifiers in modular design for proportional valves withoutelectrical position feedback• Analog compact amplifiers in plastic housing for snapping onto top-hat rails• DC-DC converters for internal voltage supply• Differential input• Ramp generator (on some versions)• Jump function for quickly passing through overlaps of directional valvesTechnical dataOperating voltage U VDC 24Command value, depending on type U V 0 to 10, ±10Output amplifierCurrent-regulated, clockedType of connectionScrew terminalsAmbient temperature range ϑ °C 0 to +50 (+70)Detailed information: Type Suitable for valve typeRE 29865 VT 11131 DBE(M) 10(20) 5X, (Z)DBE 6...1X, ZDRE 10...1X,3DRE(M) 10(16)...6XRE 29865 VT 11132 (Z)DRE 6...1XRE 29870 VT 11550 to VT 11554 DRE 4 K...3X (+3WE 4)RE 30226 VT 11004; VT 11015; VT 11026 DRE 4 K...3XRE 29866 VT 11724 DRE(M) 10(20) 5XRE 30223 VT-MSPA1-1 DBETRE 30223 VT-MSPA1-11 3DRE(M) 10...7X, ZDRE 10...7XRE 30225 VT-MSPA1-50 Valves with solenoid 2.5 ARE 30222 VT-MSPA1-525 DBETX–...–25, DBE6X–...–25, DRE6X–...–25,DBE10Z-...-25, DRE10Z-...-25,2FREX6, 2FREX10, 3FREX6, 3FREX10,4WRBA..EARE 30222 VT-MSPA1-508 DBETX–...–8, DBE6X–...–8,DRE6X–...–8,DBE10Z–...–8, DRE10Z–...–8RE 30228 VT-MSPA2 4WRA...2XIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AGHydraulics115ElectronicsPlug-in proportional amplifiers for proportional valves withoutelectrical position feedback• Analog amplifier in plug-in design for controlling proportional valves• Differential input with optional current input• Integrated ramp generator• Proportional command value / current characteristic curveVT-SSPA1Technical dataType VT-SSPA1-525 /VT-SSPA1-508VT-SSPA1-5 /VT-SSPA1-100VT-SSPA1-1 /VT-SSPA1-50Operating voltage U VDC 10.2 to 31 24 (12) 24Comm. value signal U V 0 to 10 0 to 10 (0 to 5) 0 to 10I mA 4 to 20 4 to 20 4 to 20Output amplifierCurrent-regulated, clockedType of connectionScrew terminalsAmbient temperature range ϑ °C –20 to +70 –25 to +85 –25 to +85Type Suitable for valve type Detailed information:VT-SSPA1-525…DBETX–...–25, DBE6X–...–25, DRE6X–...–25,RE 30264DBE10Z-...-25, DRE10Z-...-25,2FREX6, 2FREX10, 3FREX6, 3FREX10,4WRBA..EAVT-SSPA1-508…DBETX–...–8, DBE6X–...–8,RE 30264DRE6X–...–8,DBE10Z–...–8, DRE10Z–...–8VT-SSPA1-5 KBPS…8 RE 30116VT-SSPA1-100 KKDSR RE 30116VT-SSPA1-1 DBET-6X RE 30265VT-SSPA1-50 Valves with solenoid 2.5 A RE 30265Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics116 Hydraulics Bosch Rexroth AGAnalog amplifiers for proportional valves with electrical positionfeedback• Analog amplifiers in Eurocard format• Voltage stabilization, partially with raised measuring zero point• Differential input• Internal command value adjustment by means of 4 trimming potentiometers, call-up viarelays, with LED indicator lamp (on some versions)• Ramp generator that can be switched off• Jump function for quickly passing through overlaps of directional valves• Oscillator/demodulator for electrical position feedback• PID-controller for controlling the control spool position• Cable break detection with LED indicator lamp for position transducer; in the event of acable break, the output amplifier is de-energizedTechnical dataOperating voltage U VDC 24Command value, depending on type U V 0 to (6)9; 0 to 10; ±10I mA 4 to 20; 0 to 20Output amplifierCurrent-regulated, clockedOscillator frequency f kHz approx. 2.5Type of connection32-pin or 48-pin male connectorCard dimensions mm Eurocard 100 x 160, DIN 41494Ambient temperature range ϑ °C 0 to +50Detailed information: Type Suitable for valve typeRE 30117 VT-VRPA1-50 ... 52 FE 16, FES 25 to FES 63RE 30118 VT-VRPA1-100 DBETR; 2FRERE 30119 VT-VRPA2-1 4WRE 6...2XRE 30119 VT-VRPA2-2 4WRE 10...2XIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics117ElectronicsDigital amplifiers for proportional valves with electrical positionfeedback• Digital amplifier in Eurocard format• Presetting of all parameters for the following valves: 4WRE, sizes 6 and 10 (componentseries 2X)• Powerful microcontroller• Command value inputs for voltage and current• Variable gain and offset correction for command value input• Ramp generator• Optional sequence control and overlap compensation• Digital inputs for calling up preset command value parameters• Enable input and fault output• Function indicators by means of LEDs; test sockets for command and actual values• Configuration and parameterization using PC software BODACType VT-VRPD-2Technical dataOperating voltage U VDC 24Comm. value signal U V ±10I mA 4 to 20Output amplifierCurrent-regulated, clockedOscillator frequency f kHz 5.7Scanning time T m/s 2Serial interface RS 232Type of connection64-pin male connectorCard dimensions mm Eurocard 100 x 160, DIN 41494Ambient temperature range ϑ °C 0 to +50Type Suitable for valve type Detailed information:VT-VRPD2-2 4WRE...2X RE 30126Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics118 Hydraulics Bosch Rexroth AGAnalog amplifiers in modular design for proportional valves withelectrical position feedback• Analog compact amplifiers in plastic housing for snapping onto top-hat rails• DC-DC converters for internal voltage supply• Differential input• Ramp generator (on some versions)• Jump function for quickly passing through overlaps of directional valves• Oscillator/demodulator for electrical position feedbackTechnical dataOperating voltage U VDC +24Command value, depending on type I mA 0 to 10, ±10Output amplifierCurrent-regulated, clockedType of connectionScrew terminalsAmbient temperature range ϑ °C 0 to +50 (+70)Detailed information: Type Suitable for valve typeRE 30221 VT-MRPA1-100 DBETR...1XRE 30221 VT-MRPA1-150 2FRE 6...2XRE 30221 VT-MRPA1-151 2FRE 10...4X, 2FRE 16...4XRE 30219 VT-MRPA2-1 4WRE 6...2XRE 30219 VT-MRPA2-2 4WRE 10...2XRE 30214 VT-MRMA1-1 (Z)DRS 6...1XIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AGHydraulics119ElectronicsAnalog amplifiers for proportional valves for adjusting the flow ofaxial piston pumps• Analog amplifiers in Eurocard format• Voltage stabilization, with raised measuring zero point• Differential input• Internal command value adjustment by means of 4 trimming potentiometers, call-up viarelays, with LED indicator lamp• Ramp generator• Oscillator/demodulator for inductive transducer• PID-controller for controlling the swivel angle• Cable break detection with LED indicator lamp for swivel angle transducer; in the event of acable break, the output amplifier is de-energizedTechnical dataOperating voltage U VDC 24Command value, depending on type U V 0 to (5)10; ±10I mA 4 to 20; 0 to 20Output amplifierCurrent-regulated, short-circuit-proofOscillator frequency f kHz approx. 2.5Type of connection32-pin male connectorCard dimensions mm Eurocard 100 x 160, DIN 41494Ambient temperature range ϑ °C 0 to +50Type Suitable for pump type Detailed information:VT 5035 A4VSO RE 29955Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics120 Hydraulics Bosch Rexroth AGAnalog amplifiers in modular design for adjusting the flow of axialpiston pumps• Analog compact amplifiers in plastic housing for snapping onto top-hat rails• DC-DC converters for internal voltage supply• Differential input• Ramp generator• Oscillator/demodulator for inductive position feedback• PD-controller for controlling the control spool position• Cable break detection with LED indicator lamp for swivel angle transducer; in the event of acable break, the output amplifier is de-energizedTechnical dataOperating voltage U VDC 24Comm. value signal U V 0 to 10Output amplifierCurrent-regulated, clockedType of connectionScrew terminalsAmbient temperature range ϑ °C 0 to +50Detailed information: Type Suitable for pump typeRE 29763 VT 11019 A10VSO...FEIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics121ElectronicsAnalog amplifiers for high-response valves• Analog amplifiers in Eurocard format• Controlled output stage• Enable input• Short-circuit-proof outputs• Adjustment options: Valve zero point• Cable break detection for actual value cable• Area adjustment of single-rod cylinders (on some versions)• Amplification in the small signal range (on some versions)• Closed-loop position control with PID characteristicsTechnical dataOperating voltage U VDC 24Command value, depending on type U V 0 to 10, ±10Type of connection32-pin male connectorCard dimensions mm Eurocard 100 x 160, DIN 41494Ambient temperature range ϑ °C 0 to +70Type Suitable for valve type Detailed information:VT-VRRA1-527-2X/V0 4WRPH 6 … L-2X RE 30041VT-VRRA1-537-2X/V0 4WRPH 10 … L-2X RE 30041VT-VRPA1-537-1X/V0 5WRP 10 … L-2X RE 30041VT-VRRA1-527-2X/V0/K40-AGC 4WRPH 6 … P-2X RE 30040VT-VRRA1-527-2X/V0/K60-AGC 4WRPH 6 … P-2X RE 30040VT-VRRA1-537-2X/V0/K40-AGC 4WRPH 10 … P-2X RE 30040VT-VRRA1-527-2X/V0/K40-AGC-2STV 4WRL … P-3X RE 30043VT-VRRA1-527-2X/V0/2STV 4WRL … M-3X; 3WRCB, NG25 to 50 RE 30045VT-VRPA1-527-2X/V0/RTS-2TV 4WRL … M-3X RE 30044VT-VRRA1-527-2X/V0/KV-AGC 4WRPH 6 … P-2X RE 30046VT-VRRA1-537-2X/V0/KV-AGC 4WRPH 10 … P-2X RE 30046VT-VRPA1-5 DBETFX; DBEB…; DREB6X; 4WRP; 3FREZ RE 30052VT-VRPA1-5…RTP DBETFX; DBEB…; DREB6X; 4WRP; 3FREZ RE 30054VT-VRPA1-5…RTS DBETFX; DBEB…; DREB6X; 4WRP; 3FREZ RE 30056VT-VRPA2-527-1X/V0/RTS 4WRP 6… P-1X RE 30047VT-VRPA2-537-1X/V0/RTS 4WRP 10… P-1X RE 30047VT-VRPA2-527-1X/V0/RTP 4WRP 6… P-1X RE 30048VT-VRPA2-537-1X/V0 4WRP 10… P-1X RE 30047VT-VRRA1-527-1X/V0/RTS 4WRPH 6 … -1X RE 30042VT-KRRA2-527-1X/V0/2ch 4WRPH 6 … L-2X RE 30049VT-KRRA2-537-1X/V0/2ch 4WRPH 10 … L-2X RE 30049Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics122 Hydraulics Bosch Rexroth AGAnalog amplifiers for servo-valves• Analog amplifiers in Eurocard format• Symmetric voltage controller (optional)• PD controller for controlling the valve spool position (on some versions)• PID controller for free component placement (optional)• PID controller for controlling the swivel angle, always provided for pump controls• Oscillator/demodulator for inductive feedback (on some versions)• Output amplifier with current regulation and dither generatorTechnical dataOperating voltage U V ±22 to ±28Comm. value signal U V ±10Output amplifierCurrent-regulatedOscillator frequency, depending on f kHz ca. 2.5; 5typeOutput current, depending on type I mA ±60 / ±100Dither signal, depending on type f Hz 340; 380Type of connection32-pin male connectorCard dimensions mm Eurocard 100 x 160, DIN 41494Ambient temperature range ϑ °C 0 to +50Detailed information: Type Suitable for valve typeRE 29979 VT-SR1 4WS2EE 10RE 29980 VT-SR2 4WS2EM 6(10, 16)4WS2EB 104DS1EO 23DS2EH 10RE 30209 VT-SR41 .WRC 32RE 30209 VT-SR42 .WRC 40RE 30209 VT-SR43 .WRC 50Detailed information: Type Suitable for pump typeRE 29993 VT-SR7 A4VS..HSIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics123ElectronicsAnalog amplifiers in modular design for servo-valves• Analog compact amplifier in plastic housing for snapping onto top-hat rails• DC-DC converters for internal voltage supply• Differential input• Output amplifier with current regulation and dither generatorTechnical dataOperating voltage U VDC 24Comm. value signal U V ±10Output amplifierCurrent-regulatedOutput current I mA ±60Dither signal f Hz 340Type of connectionScrew terminalsAmbient temperature range ϑ °C 0 to +50Type Suitable for valve type Detailed information:VT 11021 4WSEM 6, 4WSEM 10 RE 29743Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics124 Hydraulics Bosch Rexroth AGAnalog command value conditioningDetailed information:RE 30255• Analog command value card for controlling proportional amplifiers or valves with integralelectronics• Generating, linking and normalizing command value signals• Configuration and parameterization of the command value card using potentiometers• Inversion of the internal command value signal via 24V input or by means of jumpers• Ramp functions• Characteristic curve correction through separately adjustable step-change heights andmaximum values• Ramp time selection through calls or quadrant recognitionType VT-SWKA-1Technical dataOperating voltage U VDC 244 call-up command value inputs U V 0 to ± 102 command value Differential input U V 0 to ± 10inputsCurrent input I mA 4 to 202 outputs Voltage output U V 0 to ± 10Current output I mA 4 to 20Type of connection64-pin male connectorAmbient temperature range ϑ °C 0 to +50Analog command value conditioning• Analog command value card for controlling proportional amplifiers or valves with integralelectronics• Generating, linking and normalizing command value signals• Configuration and parameterization of the command value card using potentiometers• Inversion of the internal command value signal via 24V inputType VT-SWKA-1-5Industrial TechnologiesDetailed information:RE 30282Technical dataOperating voltage U VDC 242 x 4 Internal command values for call-up U V 0 to ± 102 x 1 command value input U V 0 to ± 102 x 1 voltage output U V 0 to ± 10Type of connection32-pin male connectorAmbient temperature range ϑ °C 0 to +70

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AGHydraulics125ElectronicsAnalog command value conditioning• Analog command value module for snapping onto top-hat rails• For controlling valves with integrated electronics• Implementation of simple hydraulic functions via digital controls• Differential input• Actuating signal output• Power supply unit without raised zero pointType VT-SWMA-1Technical dataOperating voltage U BVDC 24Command value U V ±10Output signal (control variable) U V 0 to ± 10Type of connectionScrew terminalsModule dimensions mm 79 x 85.5 (height x depth)Ambient temperature range ϑ °C 0 to +50Fieldline module with field bus interface for the actuation of hydraulicon/off valves• Fast and ideal connection of Rexroth on/off valves• 16 digital ports parameterizable as inputs or outputs• Inputs with break-contact and make-contact function• Pulse width modulated (PWM) actuator supply outputs for the targeted power supply forswitching on and subsequent reduction of the power consumption.• Field bus systems: PROFIBUS DP, CANopenType VT-ZBUSV-1Technical dataOperating voltage U VDC 24Signal / diagnostic input voltage U V 24Signal output voltage U V 0 to 24 (PWM)Max. signal output current I A 2 (9 A per module)Type of connectionRound plug-in connectorModule dimensions mm 225 x 63 x 39Ambient temperature range ϑ °C 0 to +70Type of protection according to EN 60529 IP 67Detailed information:RE 29902Detailed information:RE 30250Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics126 Hydraulics Bosch Rexroth AGPlug-in switching amplifier• Controlling of on/off valves with direct current DC solenoid acuation through electricalsignals with low control power• Sustained short-circuit-proof output• Status indication of switching condition with LEDDetailed information:RE 30262Type VT-SSV-1Technical dataOperating voltage U VDC 24Control signal On U V 10 to 35Control signal Off U V 0 to 6Control current I mA ≤3Output current I A 2Type of connectionScrew terminalsAmbient temperature range ϑ °C -20 to +70Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics127ElectronicsAnalog controllers• Analog controllers in Eurocard format• p/Q and Δp/Q controllers• Cable break detection for pressure transducer connection• Short-circuit-proof outputs• External switch-off for controllers• Ramp generatorVT-VACAP, VT-VACAF and VT-VARAP1Technical dataType VT-VACAP VT-VACAF VT-VARAP1Controller type p/Q Δp/Q p/QOperating voltage U VDC 24 24 24Command value signal Q U V ±10 ±10 ±10Command value signal p U V 0 to 10 ±10 0 to 10Output signal U V ±10 ±10 ‒Output amplifier ‒ ‒ Current-regulated,clockedType of connection32-pin male connectorCard dimensions mm Eurocard 100 x 160, DIN 41494Ambient temperature range ϑ °C 0 to +70Type Suitable for valve type Detailed information:VT-VACAP-500-20/V0... Control valves with integral electronics (OBE) RE 30134VT-VACAF-500-10/V0 Control valves with integral electronics (OBE) RE 30136VT-VARAP1-527... 4WRPH 6, 4 WRL RE 30058VT-VARAP1-537... 4WRPH 10, 5WRP 10, 4 WRL RE 30058VT-VARAP1-527-20/3/2VAX 3WRCBH with 4WRPH6 as pilot-controlled valve RE 30058Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics128 Hydraulics Bosch Rexroth AGAnalog position and velocity controller• Analog controller in modular design• Enable input• Cable break detection for actual value cable• Short-circuit-proof interfaces• Compensation jump can be switched off• Position and velocity control• Area matching of cylindersVT-MACASTechnical dataOperating voltage U VDC 24Comm. value signal U V 0 to 10, ±10I mA 4 to 20Output signal U V ±10I mA 4 to 20Type of connection13-pin screw terminalCard dimensions mm 86 x 110 x 95Ambient temperature range ϑ °C 0 to +70Detailed information: Type Suitable for valve typeRE 30050 VT-MACAS-500-1X/V0/ Valves with integral electronics, voltage interfaceRE 30050 VT-MACAS-500-1X/V0/I Valves with integral electronics, current interfaceIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics129ElectronicsFreely configurable digital command value and controller cards• Assemblies in Eurocard format• Use as command value card for generating, linking and normalizing signals• Use as controller card for closed control loops with PIDT1 controller and state feedback• Alternating control possible (e.g. position control with superimposed pressure control)• Special control algorithms for hydraulic drives• Digital SSI or incremental position measuring system• Possibility of sequence control through block call-ups with command values, ramp timesand controller parameters• Front display with keys for displaying and changing parameters as well as for diagnosticpurposes• PC software BODAC for configuration, parameterization and diagnostics• Field bus systems: PROFIBUS DP V0, DeviceNet, CANopenType VT-HACD-1Technical dataOperating voltage U VDC 24Comm. value signal U V 0 to 10, ±10I mA 0 to 20; 4 to 20Output signal U V ±10I mA 4 to 20Scanning time T m/s 2Output amplifier for valves 4WRE...2X (optional)Current-regulated, clockedSerial interface RS 232Type of connection64-pin male connectorCard dimensions mm Eurocard 100 x 160, DIN 41494Ambient temperature range ϑ °C 0 to +50Detailed information:RE 30143Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics130 Hydraulics Bosch Rexroth AGDigital positioning cards for position-dependent brakingDetailed information:RE 30144• Assemblies in Eurocard format• Position-dependent braking of a hydraulic axis• Braking characteristics linear or root-shaped, adjustable• Traversing profile separately adjustable for A to B and B to A• Adjustable start-up ramp with rounding option (S-components)• Setup mode• Digital SSI position measuring system• Special control algorithms for hydraulic drives• Front display with keys for displaying/changing parameters as well as for diagnosticpurposes• PC software BODAC for configuration, parameterization and diagnosticsType VT-HACD-BTechnical dataOperating voltage U VDC 24Comm. value signal U V 0 to 10, ±10I mA 0 to 20; 4 to 20Output signal U V ±10I mA 4 to 20Scanning time T m/s 2Output amplifier for valves 4WRE...2X (optional)Current-regulated, clockedSerial interface RS 232Type of connection64-pin male connectorCard dimensions mm Eurocard 100 x 160, DIN 41494Ambient temperature range ϑ °C 0 to +50Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics131ElectronicsDigital injection control electronics for injection molding machines• Assemblies in Eurocard format• Open or closed-loop controlling of the injection process / closing axis‒ Injection control with superimposed pressure control / mold closing‒ Pack-and-hold pressure / building up the clamping force‒ Backpressure / clamping force holding‒ Worm return / mold opening• Command value provision optionally analog or command value profile• Sensor interfaces analog or SSI• PC software BODAC for configuration, parameterization and diagnostics• Field bus systems: DeviceNet, CANopenType VT-HACD-DPQ and VT-HACD-DPCTechnical dataOperating voltage U VDC 24Comm. value signal U V 0 to 10, ±10I mA 0 to 20; 4 to 20Output signal U V ±10I mA 4 to 20Scanning time T m/s 2Output amplifier for valves 4WRE...2X (optional)Current-regulated, clockedSerial interface RS 232Type of connection64-pin male connectorCard dimensions mm Eurocard 100 x 160, DIN 41494Ambient temperature range ϑ °C 0 to +50Type Suitable for Detailed information:VT-HACD-DPQ Injection process control for injection molding machines RE 30146VT-HACD-DPC Hydraulic clamp RE 30147Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics132 Hydraulics Bosch Rexroth AGDigital axis controlDetailed information:RE 30139• New component series 3X• Programmable NC control for up to four closed-loop controlled hydraulic axes• Use in rough industrial environments• Communication with the higher-level control via PROFIBUS DP, CANopen or SERCOS II• Programming and process visualization with WIN-PED 6• Fields of application:‒ Machine tools‒ Plastics processing machines‒ Special machines‒ Presses‒ Transfer linesType VT-HNC 100Technical dataOperating voltage U VDC 24Position measuring systemIncremental or absolute (SSI)Position measuring system U V ±10I mA 4 to 20Control variable U V ±10I mA 4 to 20Serial interface RS 232Type of connectionPlug-in connectorAmbient temperature range ϑ °C 0 to +50ProgrammingProcess interfacingControlUser programming with PCNC language with subprogram technology and conditional jumpsDigital and analog inputs and outputsPROFIBUS DP, CANopen or SERCOS IIPosition controllerPressure / force controllerVelocity controllerAlternating control (position/pressure)Synchronization controller for up to 4 axesIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AGHydraulics133ElectronicsDigital controller assembly for the secondary control of axial pistonunits• Digital controller assembly with software tailored to secondary control for open and closedloopcontrol and monitoring functions• Assembly in RF-proof housing for wall mounting or as insert for 19" racks• Permanent storage of the system parameters in a EEPROM• Parameterization and process visualization with the Rexroth software WIN-PED 5• Two modules with monitoring function for the evaluation of the signals of inductive swivelangle transducers• Configured process routine for on/off sequence• Monitoring functions with output of error code for improved diagnosticsType VT-HNC 100-SEKTechnical dataOperating voltage U VDC 24Comm. value signal U V ±10I mA 0 to 20Position measuring systemIncrementalControl variable U V ±10Serial interface RS 232Type of connectionPlug-in connector, terminalsAmbient temperature range ϑ °C 0 to +50ProgrammingProcess interfacingControlUser programming with PCDigital and analog inputs and outputsPROFIBUS DP, CANopenSpeed controllerTorque controllerDetailed information:RE 30141Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics134 Hydraulics Bosch Rexroth AGDigital multi-axis NC controlDetailed information:RE 30156• Closed-loop control of 2 to 32 electrohydraulic or electromechanical axes, freely programmable• Can be networked with further MAC8 units via local Ethernet• Communication with the higher-level control via Profibus-DP, CANopen or Ethernet• Special hydraulic control characteristics and PLC functionality for independent control ofmachines or machine parts• Various process connection options• User programming with PC• Fields of application:‒ Presses‒ Materials handling‒ Steelwork and rolling mill technology‒ Testing technology‒ Special machinesType VT-MAC8Technical dataOperating voltage U VDC 24Position measuring systemIncremental or absolute (SSI)Position measuring system U V ±10I mA 4 to 20; ±10; ±20Control variable U V ±10I mA 4 to 20; ±10; ±20Serial interface RS 232Ambient temperature range ϑ °C 0 to +50ProgrammingProcess interfacingConnection / visualizationControlUser programming with PCComprehensive diagnostic and debugging toolsComfortable data management on a PCHigh-level-language-oriented32 NC programs can be executed at the same timeHigh execution speed owing to compiled programsQuick integer and real arithmeticsExponential and angle functions32 digital inputs, 24 digital outputs, Profibus-DP, CANopen, TCP-IPBy means of "OPC server"By means of "ActiveX" elementsInterfaces: RS 485 or EthernetFollowing controllerState controllerPosition-related brakingSynchronization controller for up to 32 axes (various versions)Pressure / force controllerIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics135ElectronicsPressure transducer• Measurement of static or dynamic pressures and conversion of the measured signals intoelectrical signals• Sensor in thin-film technology• Integrated voltage regulator with reverse polarity and overvoltage protection• Measuring amplifier with voltage or current output• G 1/4 connection threadType HM 17 and HM 18Technical dataType HM 17 HM 18Operating voltage U VDC 19 to 36 19 to 36Accuracy class 0.5 0.5Output signal (alternative) U V 0 to 5; 0.1 to 10 0 to 5; 0 to 10; 1 to 6I mA 4 to 20 4 to 20Type of connectionM12 plug-in connection Round plug connectionPressure range p bar 50 to 600 60 to 400Medium temperature range ϑ °C -40 to +90 +10 to +70Ambient temperature range ϑ °C -10 to +80 -10 to +80Programmable electronic pressure switches• Measurement of static or dynamic pressures and conversion of the measured signals intoelectrical signal values and their display• Programming options (hysteresis/window, make-contact/break-contact; pick-up/drop-outdelay; damping, unit)• 4-digit alphanumerical display• Due to EMC properties also suitable for critical applications• Sensor ceramic/capacitive• G 1/4 connection threadType HEDE 10Detailed information:Type HM 17: RE 30269Type HM 18: RE 30271Industrial TechnologiesTechnical dataType HEDE10/1/ HEDE10/2/Operating voltage U VDC 18 to 36 18 to 36Accuracy class 1 1Switching output I mA 250 2 x 250Output signal U V 0 to 10 ‒I mA 4 to 20 ‒Type of connectionM12 plug-in connection M12 plug-in connectionPressure range p bar 100/250/400/600 100/250/400/600Medium temperature range ϑ °C –20 to +80 –20 to +80Ambient temperature range ϑ °C –20 to +80 –20 to +80Detailed information:Type HEDE10/1/: RE 30276Type HEDE10/2/: RE 30278

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics136 Hydraulics Bosch Rexroth AGElectronic pressure switch with two switching outputs• Simple switchpoint setting via two adjusting rings• Two antivalent switching outputs• High long-term stability• High bursting pressure range• G 1/4 connection threadDetailed information:RE 30279Detailed information:RE 50055Type HEDE 11A1Technical dataOperating voltage U VDC 18 to 36Accuracy class 2.5Switching output I mA 2 x 250Type of connectionM12 plug-in connectionPressure range p bar 100/400Medium temperature range ϑ °C -25 to +80Ambient temperature range ϑ °C -20 to +80Piston type pressure switches• For subplate mounting ("OP")• For in-line installation ("OA")• For female thread ("OK")• 5 pressure ratings: 50, 100, 210, 350, 630 barType HED 5Technical dataContact load, resistive U (I) VDC (A) 250 (0,02), 40 (1)VAC (A) 250 (3)Type of connectionPlug-in connectionPressure range p bar 50 to 630Medium temperature range ϑ °C -30 to +80Ambient temperature range ϑ °C -20 to +50Switching frequencyf 1/h 4800Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics137ElectronicsPiston type pressure switches• For subplate mounting ("OP")• For in-line installation ("OA")• As vertical stacking element in horizontal stacking systems ("OH")• With check lamp, optional (only in conjunction with large plug-in connector)• Optionally with lockable rotary knob• Pressure ratings:‒ Version "OP" and "OA": 50, 100, 200, 350, 630 bar‒ Version "OH": max. 50, 100, 200, 350 barType HED 8Technical dataContact load, resistive U (I) VDC (A) 24 (2)VAC (A) 250 (2)Type of connectionPlug-in connectionPressure range p bar 50 to 630Medium temperature range ϑ °C -25 to +80Ambient temperature range ϑ °C -25 to +50Switching frequencyf 1/h 7200Electronic signal encoders• Manually operated command value encoders for controlling valves and pumps via valveamplifier modules or cards• Sensitive control due to low operating forces• Integrated impedance converters for load-independent linearization of characteristic curves• Reverse polarity protection• Replaceable bellows• Options:‒ Deadman contact‒ Direction and zeroing contacts‒ Spring centering or locking in any position by means of friction brakeType VT 10468, VT 10406 and VT 10399Detailed information:RE 50061Industrial TechnologiesTechnical data - pressure transducerOperating voltage U VDC ±15Output signal U V ±10I mA 5Contact load, resistive U (I) VDC (A) 30 (2)Ambient temperature range ϑ °C –25 to +70Type Detailed information:VT 10468 1 control axis RE 29753VT 10406 2 control axes RE 29754VT 10399 3 control axes RE 29755

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics138 Hydraulics Bosch Rexroth AGDetailed information: TypeRacks and card holders• 19" racks for accommodating electronic assemblies in Eurocard format• Universal housing for 2 or 4 printed circuit boards in Eurocard format DIN 41612‒ External connections with screw terminals‒ Contact load of connections up to 4 A‒ Slots that are not required can be covered by dummy plates• Card holders for the installation of electronic assemblies in Eurocard format (single anddouble)RE 29768 VT 19101 Rack 1 x 3HE for 100 x 160 mm cards, with or without connectorbackpanelRE 29768 VT 19102 Rack 2 x 3HE for 100 x 160 mm cards, with or without connectorbackpanelRE 29768 VT 19103 Rack 3 x 3HE for 100 x 160 mm cards, with or without connectorbackpanelRE 30105 VT 10812 Connection adapter with 32-, 48- or 64-pin socket connector forVT 19101 to VT 19103 without connector backpanelRE 29928 VT 3002 Open card holder with 32-, 48- or 64-pin socket connectorRE 30103 VT 12302 Enclosed card holder with 64-pin socket connectorPower supply and stabilizing units• Smoothed or regulated output voltages• Stabilization of smoothed voltagesIndustrial TechnologiesDetailed information: TypeRE 29929 VT-NE30 Input voltage: 115/230 VACOutput voltage: +26 VDC/4.0 ARE 29929 VT-NE31 Input voltage: 115/230 VACOutput voltage: ±24 VDC/2 x 0.25 ARE 29929 VT-NE32 Input voltage: 115/230 VACOutput voltage: +25 VDC/+24 x 2.5 A and +24 VDC/1 A(controlled)

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AGHydraulics139ElectronicsCapacitor module• Smoothening of supply voltages up to 36 VDC• Reverse polarity protection• Overvoltage protectionType VT 11073Type Detailed information:VT 11073 Capacitor module RE 29750Service cases with test unit for proportional, high-response andservo-valves• Actuation and functional test of proportional, high-response and servo-valves• Comprehensive function monitoringType VT-VETSY-1, VT-PPVType Detailed information:VT-VETSY-1For proportional, high-response and servo-valves with integral RE 29685electronicsVT-PPVFor proportional pressure reducing valves without electrical positionfeedbackRE 29687Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics140 Hydraulics Bosch Rexroth AGDetailed information: TypeTest boxes for proportional and high-response valves• For functional testing and commissioning of proportional and high-response valves andrelated electronics• Command values can be provided internally/externally• Measuring points for inputs and outputs• Connection cable included in the deliveryType VT-PE-TBRE 30063 VT-PE-TB1 (test box I) For direct operated proportional valves without integrated electronicsRE 30064 VT-PE-TB2 (test box II) For pilot operated proportional and high-response valves withexternal amplifierRE 30065 VT-PE-TB3 (test box III) For valves with integrated electronics and voltage interfaceDetailed information:RE 29681Service cases with test unit for servo-valves without integratedelectronics• Commissioning and servicing of hydraulic systems with servo-valves without integralelectronics• Fault localization without disassembly of the servo-valveType VT-SVTSY-1Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AGHydraulics141ElectronicsClosed-loop control systems with A4VSO variable displacementaxial piston pump• Pump sizes NG125 to 355• Infinitely variable control of flow and pressure• Additional power limitation possible• High reproducibility of flow and pressure due to closed control loop• Dynamics of flow control corresponds to dynamics of control with proportional valves dueto short adjustment times of the pump• Prevention of throttling losses due to central flow and pressure control (energy-saving)• Matching of the pressure controller to the consumer possible through parameter settings• Integrated analog control electronics with type SYHDFEE• Integrated digital control electronics with CAN for type SYHDFECType SYHDFEE and SYHDFECPump size 125 180 250 355Operating pressure p maxbar 350 350 350 350Nominal flow n = 1500 rpm q V noml/min 187 270 375 532Step response 0 to 100 % T u+T gms 80 110 130 170(swivel angle control100 bar)100 to 0 % T u+T gms 70 80 130 180System scopeFields of applicationA4VSO variable displacement axial piston pump with built-on proportional valveand swivel angle transducerIntegrated or external pressure transducerIntegral electronicsPressesPlastics processing machinesTest benchesDetailed information:Type SYHDFEE: RE 30035Type SYHDFEC: (in preparation)Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics142 Hydraulics Bosch Rexroth AGClosed-loop control systems with A10VSO variable displacementaxial piston pumpDetailed information:Type SYDFE1: RE 30024Type SYDFEC: RE 30027Type SYDFEE: RE 30030• Pump sizes NG18 to 140• Infinitely variable control of flow and pressure• Additional power limitation possible• High reproducibility of flow and pressure due to closed control loop• Dynamics of flow control corresponds to dynamics of control with proportional valves dueto short adjustment times of the pump• Prevention of throttling losses due to central flow and pressure control (energy-saving)• Matching of the pressure controller to the consumer possible through parameter settings• External analog control electronics with type SYDFE1• Integrated analog control electronics with type SYDFEE• Integrated digital control electronics with CAN for type SYDFECType SYDFE1, SYDFEE and SYDFECPump size 18 28 45Operating pressure p maxbar 250 250 250Nominal flow n = 1500 rpm q V noml/min 27 42 68Step response 0 to 100 % T u+T gms 60 65 65(swivel angle control50 bar)100 to 0 % T u+T gms 35 35 35Pump size 71 100 140Operating pressure p maxbar 250 250 250Nominal flow n = 1500 rpm q V noml/min 107 150 210Step response 0 to 100 % T u+T gms 70 80 100(swivel angle control50 bar)100 to 0 % T u+T gms 40 45 60System scopeFields of applicationIndustrial TechnologiesA10VSO variable displacement axial piston pump with built-on proportional valveand swivel angle transducerIntegrated or external pressure transducerSYDZ 0001 pre-load valveVT 5041 controller card (for SYDFE1 only) with power limitation and swivel angleindicationPlastics processing machinesPressesCrane systemsBroaching machinesShipbuildingConstruction machinery

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AGHydraulics143ElectronicsClosed-loop control systems with A10VSO.../32 variabledisplacement axial piston pump• Pump sizes NG71 to 140• Infinitely variable control of flow and pressure• Additional power limitation possible• High reproducibility of flow and pressure due to closed control loop• Dynamics of flow control corresponds to dynamics of control with proportional valves dueto short adjustment times of the pump• Prevention of throttling losses due to central flow and pressure control (energy-saving)• Matching of the pressure controller to the consumer possible through parameter settings• External analog control electronics with type SYDFE1• Integrated analog control electronics with type SYDFEE• Integrated digital control electronics with CAN for type SYDFECType SYDFE1, SYDFEE and SYDFECTechnical dataPump size 71 100 140Operating pressure p maxbar 250 250 250Nominal flow n = 1500 rpm q V noml/min 107 150 210Step response 0 to 100 % T u+T gms 70 80 100(swivel angle control50 bar)100 to 0 % T u+T gms 40 45 60System scopeFields of applicationA10VSO variable displacement axial piston pump with built-on proportional valveand swivel angle transducerIntegrated or external pressure transducerSYDZ 0001 pre-load valveVT 5041 controller card (for SYDFE1 only) with power limitation and swivel angleindicationPlastics processing machinesPressesCrane systemsBroaching machinesShipbuildingConstruction machineryDetailed information:Type SYDFE1: RE 30624Type SYDFEC: RE 30627Type SYDFEE: RE 30630Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics144 Hydraulics Bosch Rexroth AGPump pre-load valves for SYDFE control system• Integrated pre-load and maximum pressure relief function• Use for flow control at operating pressures of less than 12 bar and internal pilot oil supplyType SYDZ 0001Detailed information: Suitable for pump typeTechnical dataOperating pressure p maxbar 350RE 29255 A10VSO NG 18/28RE 29255 A10VSO NG45RE 29255 A10VSO NG71RE 29255 A10VSO sizes 100/1403/3 proportional directional valves for SYDFE control system• Pilot valve for the pressure and displacement control system SYDFE• For controlling the swivel angle of a variable displacement pump of type A10VSO…DFE• Operation through a proportional solenoid with electrical feedbackType VT-DFPTechnical dataOperating pressure p maxbar 350Ambient temperature range ϑ °C –20 to +60Solenoid activationUsing external control electronics VT 5014 (for control systemSYDFE1)Using integral, analog control electronics (for control systemSYDFEE)Using integral, digital control electronics (for control system SYD-FEC)Detailed information: Type Suitable for control systemRE 29016 VT-DFP SYDFE1 (RE 30024)RE 29016 VT-DFPC SYDFEC (RE 30027)RE 29016 VT-DFPE SYDFEE (RE 30030)Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AGHydraulics145ElectronicsDigital closed-loop control amplifier for controlling A4VS... axialpiston pumps with HS4 control and A2V... axial piston pumps withEO4 control• Electrohydraulic control of swivel angle and pressure as well as limitation of the power ofvariable displacement axial piston pumps• Pressure controller with subordinate swivel angle controller• Analog inputs for command and actual values• Adjustable power limitation• Various diagnostic functions• Master/Slave function• Parameterization possible with PC and BODAC software• Field bus systems: PROFIBUS DP V0, DeviceNet, CANopenType VT-VPCDTechnical dataOperating voltage U VDC 24Comm. value signal Swivel angle U V 0 to 10, ±10I mA 4 to 20Pressure U V 0 to 10I mA 4 to 20Power U V 0 to 10Scanning time T m/s 2Output amplifierCurrent-regulated, clockedSerial interface RS 232Type of connection64-pin male connectorCard dimensions Eurocard 100 x 160, DIN 41494Ambient temperature range ϑ °C 0 to +50Detailed information:RE 30028Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Electronics146 Hydraulics Bosch Rexroth AGExternal control electronics for the DFE1 control of the A10VSOaxial piston pumpDetailed information:RE 30241Detailed information:RE 30885• Integral part of the pressure and flow control system SYDFE1 (component series 1X and2X) for activation of the A10VSO... axial piston unit with DFE1 control• Pressure and swivel angle control, with optional power limitation• Configuration of pressure controller adjustable to existing pressure fluid volume• Controller for valve spool position• Pressure-related leakage compensation (can be switched off)• Actual pressure value input, which can be changed overType VT 5041Technical dataOperating voltage U VDC 24Comm. value signal Swivel angle U V ±10Pressure, power U V 0 to 10Output amplifierCurrent-regulated, clockedType of connection32-pin male connectorAmbient temperature range ϑ °C 0 to +50Control and instrumentation technology for stage technologyapplications• Flexible, digital control and instrumentation system with optimum operating comfort• Control and instrumentation technology tailored specifically to the requirements of stagesand studios; complies with SIL3 according to IEC 61508• Adaptable to the requirements of small and large systems due to modular design• High availability• Real-time protocol via patented MR-10 busSYB2000Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics147ElectronicsControl and automation technology for hydraulic systems• Electrohydraulic systems from a single source• Designed from the specification through to the finished system• Complete package, including:‒ Design, installation and commissioning‒ Software‒ Maintenance / service• Complete design:‒ Power electrics‒ Programmable logic controls‒ Visualization systems• Minimization of the number of interfaces, on-site coordination• Comprehensive documentation on CAD and programming systemsFields of application– Steelworks and rolling mill technology– Press construction and general mechanical engineering– Test rig technology– Shipbuilding and offshore applications– Materials handling– Stage technology– Energy and environmental technology– Water engineering– Special technologyDetailed information:on requestIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Notes 148 Hydraulics Bosch Rexroth AGIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29NotesControl blocks and platesControl blocks and plates areintegrated hydraulic controlscombined with built-in or flanged-onfunction elements.They are based on circuit diagramswith specification of the position ofports and operating elements.Advantages of the block designover individual piping:• Low flow resistance / goodefficiency• Fewer sealing points• Small frame size, therefore highpower density• Industry-specific solutions• Cost reductionIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Control blocks / plates150 Hydraulics Bosch Rexroth AGMulti-station manifold plates• Compact design• Large number of variants• Separate actuator ports for each control circuitDetailed information:NG4: RE 48102NG6: RE 48107NG10: RE 48110NG16: on requestType HSRSize 4 6 10 16Operating pressure p maxbar 210 315 315 315No. of ready-to-connect control circuits 8 10 8 6Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics151Control blocks / platesControl modules• Customer-specific requirements can be met with standard modules• Directional valve modules can be combined with poppet valve modules• Stationary and mobile applications• Compact design• Flexible and extendable• Ready for connection• No internal piping of the control• IH15A and IH15B can be combined in one controlType IH15A and IH15BTechnical data IH15A IH15BOperating pressure p maxbar 500 350Flow q V maxl/min 14 30Detailed information:Type IH15A: RE 51144Type IH15B: RE 51156Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Control blocks / plates152 Hydraulics Bosch Rexroth AGModular plate systems• Compact design• No piping of the control• Ready for connection• Large number of variants• Wide field of applicationDetailed information:On inquiryType IH20Technical dataOperating pressure p maxbar 320Flow q V maxl/min 500Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AGHydraulics153Control blocks / platesIndustry-specific and custom control blocks (individuallymanufactured, small series)• Individual control blocks according to the customer's requirements• Modularized control blocks for machine tools and presses• Control blocks for plastics processing and injection molding machines, foundry machines,power plants, etc.Detailed information:On inquiryIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Notes 154 Hydraulics Bosch Rexroth AGIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29NotesAccumulators and accessoriesHydraulic accumulators are mainlyused to minimize the pump drivepower, to compensate flows, tosmooth pressure peaks, and asenergy accumulators and pulsationdampers.Performance profile• Bladder type accumulators1 to 50 liters• Diaphragm type accumulators0.075 to 3.5 liters• Safety and shut-off blocks• Charging and testing kits• Mounting elements• Safety elements• Accumulator charging valveIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Accumulators and accessories156 Hydraulics Bosch Rexroth AGHydro-pneumatic bladder-type accumulators• Bladder-type accumulator (component series 4X)• Nominal volume 1 to 50• Mounting elements• Safety elementsDetailed information:RE 50170Detailed information:RE 50150Type HABNominal capacity I 1 2.5 4 6 10 20 35 50Effective gas volume I 1.0 2.4 3.7 5.9 9.2 18.1 33.4 48.7Flow q V maxl/min 240 600 600 600 900 900 900 900Operating pressure p maxbar 350 350 350 350 330 330 330 330Hydro-pneumatic diaphragm accumulators• Diaphragm accumulator (component series 1X; 2X)• Nominal volume 0.075 to 3.5• Mounting elements• Safety elementsType HADNominal capacity I 0.075 0.16 0.35 0.5 0.7Effective gas volume I 0.075 0.16 0.32 0.48 0.75Flow q V maxl/min 10 10 40 40 40Operating pressure p maxbar 250 250 210 250 350Nominal capacity I 1 1.4 2 2.8 3.5Effective gas volume I 1.0 1.4 1.95 2.7 3.5Flow q V maxl/min 40 40 60 60 60Operating pressure p maxbar 200 350 350 350 350Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics157Accumulators and accessoriesAccumulator assemblies• Accumulator assembly with safety block according to DIN 24552• Bladder or diaphragm accumulators• Safety block with integrated shut-off valve, safety valve (type-tested) and unloading valve• Unloading valve either manually or electrically operated• Glycerine-filled pressure gauge with red marking of the pressure to be relieved• Bracket for welding into placeType ABSBGTechnical dataType of accumulatorBladder accumulatorDiaphragm accumulatorsAccumulator safetyblocksDN I 1 to 50 0.6 to 2.0 10 to 30Operating pressure p maxbar ‒ ‒ 330Detailed information:RE 50135Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Accumulators and accessories158 Hydraulics Bosch Rexroth AGAccumulator safety blocks• Safeguarding, shutting off and relieving hydraulic accumulators• Meet the requirements and safety regulations according to DIN 24552 pressure vesselregulations and the technical rules for pressure vessels (TRB 403 and TRB 404)• Accumulator adapter available as optional extra for connecting the accumulator safetyblock to the accumulatorDetailed information:RE 50131Detailed information:RE 50128Type ABZSSSize 10 20 30Operating pressure p maxbar 350 350 350Weight m kg 5.2 8.5 20.5Accumulator safety blocks• Safeguarding, shutting off and relieving hydraulic accumulators• Manual or electromagnetic unloading• Large number of variants• Compact design• Accumulator adapter available as optional extra for connecting the accumulator safetyblock to the accumulatorType 0532VAWSize DN20 DN32Operating pressure p maxbar 330 330Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29NotesPower units and accessoriesPower units form the basis of ahydraulic system.Their dimensioning and conceptare decisive for the environmentalfriendliness and efficiency of theentire system. With the combinationof power unit, control block andaccessories, Bosch Rexroth suppliesthe complete system from a singlesource!Performance profileSmall standard power units• Oil tank with a capacity of 20 to60 liters• Drive power 0.37 to 7.5 kW• Can be extended by stackingsystemsStandard power units• Oil tank with a capacity of 100 to800 liters• Drive power 4 to 75 kWWhispering standard power units• Oil tank with a capacity of 100 to1000 liters• Drive power 7.5 to 90 kWIndividual power units• Engineered and manufacturedaccording to customerrequirementsIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Power units and accessories160 Hydraulics Bosch Rexroth AGOil reservoirs• Capacities of 1000 to 20000 liters• Steel tank with high static and dynamic stiffness• Variants with dividing wall or baffleDetailed information:RE 51135Type ABTSRIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics161Power units and accessoriesModular standard power units• Capacity 20; 40 and 60 liters• Stable aluminum tank• Modular design• Compact power unit design• Individual adaptation possible• Clear, maintenance-friendly arrangementType ABSKGType of pumpRadial piston pump(fixed displacement)Gear pump(fixed displacement)Displacement V g maxcm³ 1.6 to 10 1.9 to 16Operating pressure p maxbar 315 250El. motor power P kW 0.37 to 7.5 1.5 to 7.5Modular standard power units• Capacity 100; 160; 250; 400, 630 and 800 liters• Tank design: Steel tank according to DIN 24339, form AN, cover form C• Basic power unit with pump motor assembly, tank accessories, return line filter, floatswitch, thermostat• Filter/cooler circulation circuits• Modular design of controls, accumulator assemblies kits, cooler kits• Pump/motor groupType ABMAGType of pumpVane pump / axial piston pump (variable displacement)Displacement V g maxcm³ 18 to 140Operating pressure p maxbar 280El. motor power P kW 4 to 75Detailed information:RE 51013Detailed information:RE 51098Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Power units and accessories162 Hydraulics Bosch Rexroth AGPower units with high-level tanks• Capacity 400, 630, 800 and 1000 liters• Tank design: Steel tank with supports and frame• Filter/cooler circulation circuits• Good accessibility of all componentsDetailed information:RE 51027Type ABHSGType of pumpAxial piston pump (variable displacement)Displacement V g maxcm³ 45 to 250Operating pressure p maxbar 315El. motor power P kW 7.5 to 132Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics163Power units and accessoriesHydraulic drive power units• Capacity 100, 250, 630 and 1000 liters• Very low operating noise• Pump/motor group in horizontal arrangement• Versatile use:‒ General mechanical engineering‒ Plastics processing machines‒ Lifting equipment‒ Press construction‒ Laboratories, schoolsType ABFAGType of pumpAxial piston pump (variable displacement)Displacement V g maxcm³ 28 to 140Operating pressure p maxbar 280El. motor power P kW 7.5 to 90Hydraulic drive power units• Capacity 160, 250, 400, 630, 800 and 1000 liters• Very low operating noise• Pump/motor group in vertical arrangement• Small erection space required• Versatile use:‒ General mechanical engineering‒ Plastics processing machines‒ Lifting equipment‒ Press construction‒ Laboratories, schoolsType ABFAG-VType of pumpAxial piston pump (variable displacement)Displacement V g maxcm³ 28 to 140Operating pressure p maxbar 280El. motor power P kW 7.5 to 90Detailed information:RE 51096Detailed information:RE 51094Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Power units and accessories164 Hydraulics Bosch Rexroth AGHydraulic primary power unitsDetailed information:RE 51018• Capacity 63, 100, 160, 250 and 400 liters• For closed circuits• Stable steel tank• Good accessibility• Versatile use in industrial applications:‒ Shredder systems‒ Stirring drives‒ Mixers‒ Centrifuges‒ WindersType ABPAGType of pumpAxial piston pump (variable displacement)Displacement V g maxcm³ 28 to 250Operating pressure p maxbar 360El. motor power P kW 15 to 160Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics165Power units and accessoriesPump/motor groups• With fixed displacement pumps, type PGH and PGF as well as variable displacementpumps, types A10VSO and PV7• Electric motor frame sizes 112 to 280, form B35• Pump mounted to the motor with pump mounting bracket and coupling• Provided for mounting onto oil tanks, baseframe or separate installation• Combination pumps possible for multi-circuit systemsType ABAPGType of pumpInternal gear pump(fixed displacement)Axial piston pump(variable displacement)Vane pump(variable displacement)Displacement V g maxcm³ 20 to 125 18 to 140 30 to 118Operating pressure p maxbar 315 315 160El. motor power P kW 11 to 90 4 to 90 5.5 to 36Pump/motor groups• With fixed displacement pumps type PVV• Pump mounted to the electric motor with pump mounting bracket and coupling• Electric motor, form B35• Provided for mounting onto oil tanks, baseframe or separate installation• Specifically designed for the use in filtering/cooling/circulation circuitsType ABUPGType of pumpVane pump (fixed displacement)Displacement V g maxcm³ 18 to 193Max. operating pressure p maxbar 10El. motor power P kW 0.75 to 7.5Detailed information:RE 51062Detailed information:RE 51066Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Power units and accessories166 Hydraulics Bosch Rexroth AGClamping and drive modulesDetailed information:RE 51137Control module: RE 51144• Volume 2.9 liters• Plastic tank with built-in motor• Duty cycle, short-time operation S2 and intermittent operation S3• Compact design• Low noise• Wide field of application• Large number of variants• Complete hydraulic control possible• No piping of the control• Ready for connectionType UPE 1Type of pumpRadial piston pump(fixed displacement)Displacement V g maxcm³ 0.26 to 1.6Operating pressure p maxbar 700El. motor power P kW 0.37Clamping and drive modules• Volume 2.4 to 7.2 liters• Aluminum tank with built-in motor• Duty cycle, short-time operation S2 and intermittent operation S3• Compact design• Low noise• Wide field of application• Large number of variants• Complete hydraulic control possible• No piping of the control• External attachments possible• Ready for connectionType UPE 2Industrial TechnologiesDetailed information:RE 51142Control module: RE 51144Type of pumpRadial piston pump(fixed displacement)Gear pump(fixed displacement)Displacement V g maxcm³ 0.40 to 2.0 1.0 to 10.0Operating pressure p maxbar 700 260El. motor power P kW 1.1 and 2.2 1.1 and 2.2

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics167Power units and accessoriesClamping and drive modules• Volume 8.5 to 11 liters• Aluminum tank with built-in motor• Duty cycle, continuous operation S1• Compact design• Low noise• High cooling capacity• Single and double pump• Two separate hydraulic controls possible• No piping of the control• Ready for connectionType UPE 3Type of pumpRadial piston pump(fixed displacement)Gear pump(fixed displacement)Displacement V g maxcm³ 0.67 to 1.67 1.0 to 10.0Operating pressure p maxbar 700 260El. motor power P kW 3.0 and 4.0 3.0 and 4.0Drive modules• Volume 26 liters• Aluminum tanks• 100% duty cycle• Compact design• Low noise• High cooling capacity• Wide field of application• Various mounting options• Complete hydraulic control possible• Ready for connectionType UPE 5Type of pumpExternal gearpump (fixed displacement)Internal gear pump(fixed displacement)Vane pump (variabledisplacement)Displacement V g maxcm³ 6.0 to 16.0 4.0 to 16.0 10 to 20Operating pressure p maxbar 250 200 250El. motor power P kW 2.2 to 4.0 2.2 to 4.0 2.2 to 4.0Detailed information:RE 51147Control module: RE 51144Detailed information:RE 51145Control module: RE 51156Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Power units and accessories168 Hydraulics Bosch Rexroth AGPressure gauge (liquid filled)Detailed information:RE 50205Detailed information:RE 50086• Housing made of stainless steel• Design according to EN 873-1• Pressure display in bar/MPa or bar/psi• Bi-colored scale• Measuring connection at the back or bottom• Mounting type with screws or bracketsType ABZMMSize 40; 63; 100Maximum operating pressure bar 1000Pressure filters for installation in pressure lines with filter elementsand installation dimensions according to DIN 24550• Filter elements based on inorganic fiber• Adsorption of finest particles over a wide pressure differential range• High contamination retention capacity due to large specific adsorption surface• High bursting strength of filter elements (e.g. in the case of cold starts)• Filter ratings 10 μm and 3 µm absolute• Mechanical, visual and electrical clogging indicatorsType ABZFD-S...-DIN and ABZFD-S...-SAESize 63 to 1000Nominal pressure p maxbar 400Flow q V maxl/min 520Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AGHydraulics169Power units and accessoriesPressure filters for lateral flange-mounting to control blocks withfilter elements according to DIN 24550• Filter elements based on inorganic fiber• Adsorption of finest particles over a wide pressure differential range• High contamination retention capacity due to large specific adsorption surface• High bursting strength of filter elements (e.g. in the case of cold starts)• Filter ratings 10 μm and 3 µm absolute• Mechanical, visual and electrical clogging indicatorsType ABZFD-L...-DIN and ABZFD-L...-SAESize 63 to 400Nominal pressure p maxbar 315Flow q V maxl/min 330Return flow filter according to DIN 24550 for direct tank installation• Filter elements based on inorganic fiber• Adsorption of finest particles over a wide pressure differential range• High contamination retention capacity due to large specific adsorption surface• High bursting strength of filter elements (e.g. in the case of cold starts)• Filter ratings 10 μm and 3 µm absolute• Mechanical, visual and electrical clogging indicatorsType ABZFR-S...-DIN and ABZFR-S...-SAESize 40 to 1000Nominal pressure p maxbar 10Flow q V maxl/min 685Detailed information:RE 50087Detailed information:RE 50088Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Power units and accessories170 Hydraulics Bosch Rexroth AGTank breather filter• Filter elements resistant to mineral oil, hardly inflammable and biological fluids• Good retention rate with low pressure drop• High contamination retention capacity due to large specific adsorption surface• Filter ratings 10 μm and 3 µm absolute• Threaded, flanged or welded connectionDetailed information:RE 50070Type ELF, BF, and BLMax. air flow l N/min 6000Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics171Power units and accessoriesOil/air cooler• Compact design• Large number of variants• Horizontal or vertical installation• Low noise level 52 to 65 dB (A)• Permitted operating pressure 26 barType KOL; KOLPHeat dissipation capacity P kW 3 to 120 Detailed information:RE 50111Filtering/cooling/circulation circuits• Compact circulation circuit with circulation pump, attached low pressure filter according toDIN 24550 and plate type heat exchanger• Electric motor frame sizes 80 to 132• Modular designType ABUKGHeat dissipation capacity P kW 4 to 37 Detailed information:RE 50126Pulsation damper• Use in hydraulic units with displacer pumps• Any installation position possibleIndustrial TechnologiesType SYPD0001 and SYPD0002SYPD0001SYPD0002Nominal pressure p maxbar 400 300Detailed information:RE 29253

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Power units and accessories172 Hydraulics Bosch Rexroth AGPulsation damper• Pulsation damper for pump types A10VSO NG18 to 140 and A4VSO NG40 to 250• Use in hydraulic units with displacer pumps• Screwed directly to the pressure port of the pumpDetailed information:RE 50142Detailed information:RE 50212Type PULSATION DAMPERNominal pressure p maxbar 300Float switch• With two adjustable switching contacts and an optional fixed temperature contactType ABZMS-35Max. switching point mm 400Float switch• With two adjustable switching contacts and an optional fixed temperature contact• With resistance measuring chain (level) and resistance thermometer (temperature) withanalog outputIndustrial TechnologiesType ABZMS-36Detailed information:RE 50214Max. switching point mm 1200

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics173NotesIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Notes 174 Hydraulics Bosch Rexroth AGIndustrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Industrial TechnologiesBosch Rexroth AGHydraulicsZum Eisengießer 197816 Lohr, Germanyinfo@boschrexroth.dewww.boschrexroth.comTel.: +49(0)9352/18-0Fax: +49(0)09352/18-40Printed in GermanyRE 00208/08.08Replaces: 07.06