Complete Website without News, General Terms and ... - Kirson GmbH

More documents

Recommendations

Info

Scrims reinforce many other productsFire-retardant materialsGeo-textilesWallboards made from gypsum or concreteSound insulation materialsFilter elementsAutomotive componentsWiping clothsGlass fibre reinforced plasticsMoulded parts
Typical constructionsSingle warpThis is the most common scrim construction. The firstwarp* thread under a weft** thread is followed by awarp thread above the weft thread. This pattern isrepeated across the whole width. Typically the spacingbetween the threads is regular across the whole width.At the intersections two threads will always meet eachother.* warp = all threads in machine direction** weft = all threads in cross directionDouble warpThe upper <strong>and</strong> lower warp threads will always beplaced one upon the other so that the weft threads willalways be fixed between an upper <strong>and</strong> a lower warpthread. At the intersections three threads will alwaysmeet each other.Scrim nonwoven laminatesA scrim (single or double warp) is laminated onto anonwoven (made from glass, polyester or other fibres).It is possible to produce laminates with nonwovensweighing from 15 to 200 g/m².
Page 2 and 3: Kirson Chronicle1962 Alfons Kirzing
Page 4 and 5: 1999 The co founder of the company,
Page 6 and 7: Scrims reinforce sailclothFor many
Page 10 and 11: Square constructions1/11 warp threa
Page 12 and 13: powers in warp direction will be ab
Page 14 and 15: Product make-upWidth 4 up to 133 in
Page 16 and 17: Who is who in SalesArea Sales Manag
Page 18 and 19: Binder DevelopmentManagerRaimund Li
Page 20 and 21: Address / Publisher's notesPlace of

Complete Website without News, General Terms and ... - Kirson GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?