FO Fiberport compact module system - Composites

SUHNER ®FIBEROPTICFIBERPORT COMPACT MODULE SYSTEMHUBER+SUHNER, Fiberoptic Division

FIBERPORT Compact Module SystemThe FIBERPORT compactmodule system is a userfriendlysystem for a centralfibre optic distribution. Thesystem excels by its compactdesign and its intelligent fibremanagement. The 19” rackaccomodates up to 12compact modules and is thuscurrently the only availablesystem which offers place for144 fibres. The FIBERPORT’sconveyor tray receives themulti-fibre loose tube cableoverlengths. The guidingchannel organizes the patchcable layout under considerationof the minimal bendingradius in a simple and effectiveway. FIBERPORT is thus asystem solution with highestpacking density for sophisticatedfibre optic cabling requirements.ContentsFront view of a 19”installation rackContents:• Rack unit 19”(KPM3-BGT-7TE)• Compact modules(see order code)• Blanking plates 7SU(KPM3-BLD-7TE)• Guiding channel(KPM3-RANG-001)• Conveyor tray(KPM3-UEB-001)Rear view with pulled out tray

Highest flexibilityCompact modulesCompact module 3Ufeatures:• 3U height (12.9 cm),7SU width (3.5 cm),aluminum front plate• designed to be equippedwith connector types E2000,SC, ST or FCPC• a lockable overlength andsplicing cassette prevents thepigtails to be damaged• all pigtails are colour codedfor a better recognitionduring splicing procedures• the multi-fibre loose tubecables in the splicingcassette are dismantled andready for splicing• new for the E2000 module:a subsequent adapterassembling is alwayspossible(H+S patent)Overlength cassetteOverlength andsplicing cassetteSplicing cassetteFeatures:• fibre radius limiting on allcritical points• integrated protection covers• module integrates fibreguiding (without leaving thecassette)• splice tray for 12 fibres(max. 24 fibres)

Accessory: Rack unit• the 19” rack unit accomodates 12 compactmodules• light aluminum design• 24 guide rails for 7SU modules, pre-assembledDenominationRack unitOrder numberKPM3-BGT-7TEAccessory: Guiding channel• easy patch cable organization• compact aluminum design• adjustable radius limitationsDenominationGuiding channelOrder numberKPM3-RANG-001Accessory: Conveyor tray• pull-out design (towards rear)• clear organization of multi-fibre loose tubereserves• compact aluminum designDenominationConveyor trayOrder numberKPM3-UEB-001Compact module order codeKPM3Compact module 3HE7U- 7 sub units with multi-fibre loose tube entranceFLSH-Assembled with E2000 pigtailsFSC-Assembled with FSC pigtailsFST-Assembled with FST-HQ pigtailsFCPC-Assembled with FCPC pigtailsFSCD-Assembled with FSC Duplex pigtails12 Pigtail amountA Singlemode HRL (APC 8 o )BSinglemode PCC Multimode 50 µmD Multimode 62.5 µmKPM3 7U- 12 Order numberAccessory: Blanking plate 7SUKPM3-BLD-7TEWaiverWhile the information contained in this folder has been carefully compiled tothe best of our present knowledge, it is not intended as representation or warrantyof any kind on our part regarding the fitness of the products concernedfor any particular use or purposes and neither shall any statement containedherin be construed as a recommendation to infringe any industrial propertyrights or as a license to use any such rights. The fitness of each product for anyparticular purpose must be checked beforehand with our specialists.HUBER+SUHNER AGFiberoptic DivisionCH-9100 HerisauPhone +41 (0)71 353 41 11Fax +41 (0)71 353 46 47www.hubersuhner.com648 146/01.99/3000e (reprint 10.99)