ASMi-54 - Connect Data
ASMi-54 - Connect Data
ASMi-54 - Connect Data
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Data</strong> SheetCONTROL PORTInterfaceV.24/RS-232TypeDCEFormatAsynchronous; 8 bits, 1 stop bit, no parity<strong>Data</strong> Rate9.6, 19.2, 115.2 kbps<strong>Connect</strong>or9-pin, D-type, femaleMONITORING AND DIAGNOSTICSReal-time alarmsSHDSL, E1, and Ethernet statisticscollectionLocal and remote loopbacksTIMINGCO mode:• Internal – derived from the modem• External – derived from E1 portCPE mode:• Receive – derived from the SHDSL lineGENERALPower SupplyWide-range AC/DC: 100 to 240 VAC,-48 to -60 VDC nominalNote: Redundant AC/DC wide-range power supplyconfiguration is available in a 19-inch metalenclosure (for Ring or Daisy-chain topologies only).DC: 24 VDC nominalRemote Power FeedingVia SHDSL line, 120 VDC maximum (4-wireor 8-wire, for units with Ethernet serviceonly)IndicatorsFront PanelPWRGreen (on) - Power supply onTSTALMYellow (on) – Test in processRed (on) – Alarm is detectedSHDSL SYNC (per line)Green (on) - Line is synchronized andcan pass dataGreen (flashing) - Line is in trainingprocessRed (on) - Line is not synchronizedE12W5.7 MbpsBTS<strong>ASMi</strong>-<strong>54</strong>LETHE1IP/ETHNetwork4 x E12W5.7 MbpsNode BBTSRNC<strong>ASMi</strong>-<strong>54</strong>LETH<strong>ASMi</strong>-<strong>54</strong>E1Node BTDMNetwork4 x ETH2W5.7 Mbps<strong>ASMi</strong>-<strong>54</strong>LETHBTSBSCE1Node B2W5.7 MbpsBTS<strong>ASMi</strong>-<strong>54</strong>LETHNode BFigure 4. <strong>Connect</strong>ing Co-located 2G/3G Base Stations using <strong>ASMi</strong>-<strong>54</strong>L Modems over Copper Lines
Change language