Construction and Materials Manual - Wisconsin Department of ...

More documents

Recommendations

Info

CMM 8-75 Materials Testing and Acceptance - Structuresrevised by the submitter to include all the appropriate column information in the additional workbooks.The set (inches per 10 blows) and stroke (feet) at the end of driving operations should be recorded for each pile.These values are required to calculate the Nominal Resistance (Bearing Value) of the piles.Electronic copies (PDFs) of forms DT1924 and DT1315 are to be submitted for all structures to the Bureau ofStructures by email at DOTDTSDStructuresPiling@dot.wi.gov and to the Bureau of Technical Services,Geotechnical Unit at DOTDTSDGeotechnicalPiling@dot.wi.gov. Include the structure number (B, C, S, or etc.)in the subject field of the email. A copy is to be retained in the region project files.An example of a completed report is shown in Figure 2Figure 2 Piling Record, Form DT1315June 2013 Page 8
CMM 8-75 Materials Testing and Acceptance - Structures8-75.3.5 Bridge Inventory Report, DT 2006 and Bridge Inspection Report, DT 2007 and DT 2008These forms will be completed whenever work is done on a bridge. The bridge maintenance engineer should benotified by the engineer in a timely manner so the bridge can be inspected after completion, but before thecontractor has left the site and the bridge is open to traffic.Inspection will be done by the bridge maintenance engineer, with assistance provided by the engineer ordesignee.A copy of department forms DT2006, DT2007 and DT2008 must be filed in the region maintenance section. Acopy of Form DT2006 must be sent to Bureau of Structures for their statewide bridge inventory file. If a localroad is involved, a copy of DT2006 is to be sent to the county highway commissioner also.List of AttachmentsAttachment 1Attachment 2Attachment 3Department Plant Certification Program RequirementsSchedule of TestsPlant Inspection Fabrication FormsJune 2013 Page 9
Page 1 and 2: Construction and Materials ManualCh
Page 3 and 4: CMM 8-75 Materials Testing and Acce
Page 5 and 6: CMM 8-75 Materials Testing and Acce
Page 7: CMM 8-75 Materials Testing and Acce

Construction and Materials Manual - Wisconsin Department of ...

Create successful ePaper yourself

Delete template?

Save as template?