CHD 270, CHF 270 and Automation - Cut Technologies

Network concept.You can benefit in particular from the saw blade management function that allows the direct data transmission to thecustomer‘s own computing system. Functions for the collection of operation and machine data have been implementedin the control system, adding more security to the entire production process. This allows you to analyze the machineutilization and productivity, as well as to store workpiece data.VOLLMER‘s Remote Service brings you the optionof allowing the VOLLMER Service Team to connectto your machine in order to establish the currentmachine position and condition. Software updatescan also be uploaded in this manner. This is anexcellent opportunity to analyze errors and alsoto provide programming support.During operation data collection (BDE), measureddata (diameter, cutting width, hook angle, …),machining times and grinding wheel wear are savedfor every particular tool. This data can then be usedagain at any point in time.During machine data collection (MDE), run times,interruption times and error messages are saved.This data can then for example be used to calculatethe machine utilization, or for any other purpose.Network design:RemoteserviceSpecific components can be connected to a networkby means of the standard 10BaseT Ethernet RJ45.The data input station with an integrated routeracts as the interface between the machines, towardthe customer‘s own server or PC.Corporate networkServer, PC:DNC, BDE, MDEDES = Data input stationDNC = Electrical control device(processor and axis driver)BDE = Operation data collectionMDE = Machine data collectionDESLANDNC, BDE,MDERouterwithFirewallVOLLMER Werke Maschinenfabrik GmbHEhinger Straße 34D-88400 Biberach/RißPhone +49 (0) 73 51/5 71-0Fax +49 (0) 73 51/5 71-130www.vollmer-group.cominfo-vobi@vollmer.de721e/0.5/05.09/DWS