Reference Manual - LYNX Technik AG

More documents

Recommendations

Info

Reference Manual R CT 5010 Version1.0R CT 5010 used with R CT 5030To expand the system beyond the five rackspossible in one “stack” using R CT 5010 BusExpanders it is necessary to add a R CT 5030 MasterController to the system.LANHost Rack with RCT 5030 RCT 5020RS485Up to 15R CT 5010FUSEFUSEFUSEFUSEFUSEFUSEFUSEFUSERCT 5010RCT 5010Up to 4 x R CT 5010 Up to 4 x R CT 5010Note. Maximum scale for a singleR CT 5030 is 15 x R CT 5010 RackControllers. Further expansion isachieved by adding a second RCT 5030 Master controller withconnecting into the LANNote Please refer to the R FR 3010 or R FR 5010 rack framemanuals for cable wiring information.Page 16
Reference Manual R CT 5010 Version1.0InstallationCautionThe CardModule is shipped in aprotective anti-static bag. Please takesuitable precautions to avoid staticdischarge onto any part of the PCB orcomponents when handling module orserious damage could result.The R FR 5010 Card frame and the R FR 3010 Cardframes both have a slot configured for the R CT5010 Controller and the card is simply plugged inwhere shown.Note. The RCT 5010 supports hot swapping so thereis no need to remove power from the system toinstall the card.R FR 5010 ControllerR FR 3010 Rack FrameR FR 5010 ControllerR FR 5010 Rack FramePage 17
Page 1 and 2: Reference ManualR CT 5010Bus Expans
Page 3 and 4: WarrantyReference Manual R CT 5010
Page 5 and 6: Reference Manual R CT 5010 Version1
Page 15: Reference Manual R CT 5010 Version1
Page 25: Reference Manual R CT 5010 Version1

Reference Manual - LYNX Technik AG

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?