Sagemcom CX 2000-7 PLC/RS-485

Sagemcom CX 2000-7PLC/RS-485THREE-PHASE PLC/RS-485SMART METER FORDOMESTIC APPLICATION

• Tariff management by built-in Real Time Clock• Programmable load profile• Load management via built-in relay• Disconnection through latching relay• Local and remote reading & programming• Enhanced anti-tampering system• M-Bus master station fro external meter• Open communication protocol• Remote software upgradeA combined expertise in metering, telecommunicationsand system integrationSagemcom developed solid leadership positions inbroadband communication & convergence, energymanagement and telecom systems integration, all 3 keyfactors to address new challenges in the energy sector.Thanks to this unique expertise, Sagemcom hascreated a comprehensive offer focused on energyefficiency and its ecosystem.Moreover, by choosing Sagemcom you benefit from :A world class manufacturer who controls its ownproduction capacityA flexible industrial site dedicated to mass productionA technology validated and approved worldwideA top of the range technical supportThe highest standards of qualityTECHNICAL FEATURESCURRENT• Current Range = 5 (100) A• Starting current = 25 mA• Self-consumption :- Voltage 2W and 6VAwithout communication- Current < 0,025 VA at Ib = 5A• Power supply = 230 V• Frequency = 50 HzMETERING DATA• 4 quadrant measurements Active andReactive energy• Class 1 or 2 accuracy according to IEC62052-11 & 62053-21 for active energymeasurement• Class B or A accuracy according to EN50470-1 and EN 50470-3 for active energymeasurement• Class 2 accuracy according to IEC 62052-23 for reactive energy measurement• Instantaneous measurement of U, I, P, F• Average measurement of P, Q and power factorTARIFF MANAGEMENT• Real-time clock with 7 day super-capback-up.• 4 seasons and 6 tariffs• Up to 36 registers for energy• Up to 6 maximum demand registersRECORDING• Non-volatile memory E2PROM• Power failure ride-through• Load profile- 2 multitrack groups- Programmable Independentintegration period• Recording up to 132 days for 15 min.• Historical valuesCUSTOMER DISCONNECTION• Disconnection through 120A relay onphase only• Compliant with UC3 i.e. IEC 62055-31appendix CCOMMUNICATION• LOCAL INTERFACE- IEC 62056-21, Mode E- Infra Red local communication port- Up to 9 600bps• PLC INTERFACE- Physical : IEC 61334-5-1- S-FSK modulation- CENELEC A band- Link : DLMS HDLC IEC 62056-46- Automatic repeat function- Plug&Play Technology• BUS RS485 INTERFACE- Connector: RJ45- Link : DLMS HDLC IEC 62056-46 +IEEE802.3- Supply 30Vdc 2W for external modem• EXTERNAL CONTACT INPUT- Gas leak detection- Remote reconnection of the powerbreaker• DATA FORMAT- DLMS-COSEM and OBISLOCAL METER READING• Ready for water, gas and heat/coolingmeter reading• 2 wire M-Bus EN 13757 connection• Master station• Power up to 4UMECHANICAL FEATURES• IP51 protection degree (IEC 60529)• Fixing Triangle DIN 43857• Operating Temperature : -25°C to +70°C• Humidity ≤ 90% at 40°CCONNECTION• DIN typeAPPLICATION SOFTWARE UPGRADE• Physical separation betweenmetrological and application software part• Two bootable memory bank• MID WELMEC guide 7.2• Local or remote download throughoptical port or RS-485 or PLCAll rights reserved. The information and specifications included are subject to change without prior notice. Sagemcom tries to ensure that all information in this document is correct, but does not accept liability for error oromission. Non contractual document. All trademarks are registered by their respective owners. Simplified joint stock company - Capital 158.291.895 Euros - 440 294 510 RCS Nanterre. 12/2009Sagem Communications SASEnergy & Telecom Business UnitHeadquarters : 250, route de l’Empereur92848 Rueil-Malmaison Cedex - FRANCETel : +33 (0)1 57 61 10 00 - Fax : +33 (0)1 57 61 10 01www.sagemcom.com