Three Shaker Clocks - Popular Woodworking Magazine

More documents

Recommendations

Info

At left, the hood with the turnings installed.With the turnings finished, the next step was to create the dial frame and the hood door.Arches on both were cut on the bandsaw and cleaned up with the oscillating spindle sander.
The arch frame is made with half!lap joints.Stock is removed using the table saw to nibble away stock one "kerf" at a time.This is a slow procedure but works well.
Page 1 and 2: Shaker Tall ClocksA Family Project
Page 3 and 4: Cont.smaller items such as wooden t
Page 6: As the lumber came finished only on
Page 9 and 10: Like the waists, the bases were joi
Page 11 and 12: On the left, the waists after a lig
Page 14 and 15: The tops of the clocks, the "hoods"
Page 16: Here's Tom turning at the lathe. Ea
Page 21: With the addition of the doors, the
Page 24 and 25: The movements were mounted to the s
Page 26: Here Tom is making final adjustment
Page 30 and 31: Clocks were finished in three steps
Page 32 and 33: Here's our three clocks together.Sl
Page 35: Clock InfoClock Design: Glen Huey,

Three Shaker Clocks - Popular Woodworking Magazine

Create successful ePaper yourself

Delete template?

Save as template?