McKinney Price Book effective June 15 2011.pdf - LV Sales Inc

Transfer Device SolutionsMcKINNEY ElectroLynx ® Harnesses & ComponentsFor Wood DoorsCORBIN RUSSWIN, SARGENT, and YALEIf wood door, order a retrofit cable with the Molex connector on one end,and pins crimped on the other end.PART #McKINNEYCATALOG #3", 6" & 12" HarnessBetween hinge and the end of an exit deviceDescription:93990 QC-C003PQC12 - 3" Wire Harness; 8 & 4 Pin Connector w/12 wires(For Exit Device Rail Jumper to Hinge, Insert pre-pinned ends into plasticMolex connector)QC12 - 6" Wire Harness; 8 & 4 Pin Connector w/12 wires93991 QC-C006P (For Exit Device Rail Jumper to Hinge, Insert pre-pinned ends into plasticMolex connector)QC12 - 12" Wire Harness; 8 & 4 Pin Connector w/12 wires93992 QC-C012P (For Exit Device Rail Jumper to Hinge, Insert pre-pinned ends into plasticMolex connector)2', 3' & 4' HarnessBetween hinge and through the door to the lockset or exit device trim.93993 QC-C200P93994 QC-C206P93995 QC-C300P93996 QC-C306P93997 QC-C400PQC12 - 26" Wire Harness; 8 & 4 Pin Connector w/12 wires(Insert pre-pinned ends into plastic Molex connector)QC12 - 32" Wire Harness; 8 & 4 Pin Connector w/12 wires(Insert pre-pinned ends into plastic Molex connector)QC12 - 38" Wire Harness; 8 & 4 Pin Connector w/12 wires(Insert pre-pinned ends into plastic Molex connector)QC12 - 44" Wire Harness; 8 & 4 Pin Connector w/12 wires(Insert pre-pinned ends into plastic Molex connector)QC12 - 50" Wire Harness; 8 & 4 Pin Connector w/12 wires(Insert pre-pinned ends into plastic Molex connector)15' HarnessFrom the hinge location, up the jamb to the above the ceiling, or up and around a full lite or half lite metal door.QC12 - 15' 2" Wire Harness; 8 & 4 Pin Connector w/12 Wires93998 QC-C1500P(Termination in Field)NetPriceMax Hingerequired(Not included)$10.90 QC12$11.30 QC12$14.18 QC12$15.62 QC12$16.67 QC12$17.03 QC12$17.18 QC12$17.45 QC12$35.41 QC12Copyright © 2009-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.www.mckinneyhinge.com1-800-810-WIRE (9473)

Transfer Device SolutionsMcKINNEY ElectroLynx ® Harnesses & ComponentsCORBIN RUSSWIN, SARGENT, and YALEPART #McKINNEYCATALOG #Description:Kit Application:NetPriceMiscellaneous Kits94034 QC-R001 Molex/Repair/Service KitMiscellaneous KitsIncludes 2, 4, 8 Molex receptacles and plugs (Qty. 10 ea) and thecorresponding terminals (100 of each type), extraction tool andpinning assembly guide. Customer must purchase Molex crimperseparately.$77.2694035 QC-R002Extraction ToolQuantity 1 Each, Sold one each$16.8094036 QC-R003Molex HandCrimp ToolMolex tool used to attach terminals to wire(stripped) ends$350.00PART #McKINNEYCATALOG #Receptacles and TerminalsDescription:Kit Application:NetPriceLockingmechanismCopyright © 2009-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.94037 QC-RF2 Female Receptacle 2 CKT Quantity 1 Bag of 100 in Kit, Bag $19.7494026 QC-RF4 Female Receptacle 4 CKT Quantity 1 Bag of 100 in Kit, Bag $24.1594027 QC-RF8 Female Receptacle 8 CKT Quantity 1 Bag of 100 in Kit, Bag $31.9294028 QC-RM2 Male Receptacle 2 CKT Quantity 1 Bag of 100 in Kit, Bag $21.0093978 QC-RM4 Male Receptacle 4 CKT Quantity 1 Bag of 100 in Kit, Bag $24.7893979 QC-RM8 Male Receptacle 8 CKT Quantity 1 Bag of 100 in Kit, Bag $32.6694029 QC-FT2024 Female Terminal AWG 20-24 Quantity 1 Bag of 100 in Kit, Bag $8.1994030 QC-FT2630 Female Terminal AWG 26-30 Quantity 1 Bag of 100 in Kit, Bag $8.1993980 QC-MT2024 Male Terminal AWG 20-24 Quantity 1 Bag of 100 in Kit, Bag $8.1994031 QC-MT2630 Male Terminal AWG 26-30 Quantity 1 Bag of 100 in Kit, Bag $8.1994033 QC-DCC Pinning Assembly Guide Quantity 10 in Kit, Sold 1 Each $17.80Door Cord and EPT94002 MCK-TSB-C94003 MCK-TSB-CXLDoor Cord Gray/Black Caps18"Door Cord Gray/Black Caps36"Quantity 1 Each, Sold 1 Each $14.18Quantity 1 Each, Sold 1 Each $19.4394004 MCK-EPT Electrical Power Transfer Quantity 1 Each, Sold 1 Each $33.0894005 MCK-EPTL Electrical Power Transfer, Long Quantity 1 Each, Sold 1 Each $43.5894006 MCK-EL-EPT ElectroLynx EPT -12 wire Quantity 1 Each, Sold 1 Each $52.5094007 MCK-EL-EPTL ElectroLynx EPTL Long -12 wire Quantity 1 Each, Sold 1 Each $63.00As part of their promise to provide innovative, fast and effective high securitysolutions to their customers, ASSA ABLOY Group brands offer ElectroLynx ® ,a universal quick-connect system that simplifies the electrification of thedoor opening.ElectroLynx ® is a registered trademark of ASSA ABLOY Inc.FemaleReceptacle(8 ckt)Male Plug(8 ckt)www.mckinneyhinge.com1-800-810-WIRE (9473)

NET PRICE BOOK B-2011EFFECTIVE DATE:June 15, 2011This book supersedes and takes precedence over any PRICE BOOKprinted prior to this date.Contact McKINNEY PRODUCTS CO. for prices and availability ofnon-standard or special items not listed in this book.

GEN-1GENERAL INFORMATIONACCEPTANCEMcKinney reserves the right to decline an order, in whole or in part, whenthe type or quantity of goods or credit worthiness of the Purchaser is notsatisfactory to us in our sole and absolute discretion.Purchase Orders, Competitive Price Quotation ("CPQ") requests,Acknowledgements or the like issued by the Purchaser that have contrarystandard terms and conditions are not binding on McKinney, unless suchterms and conditions are approved in a separate written agreement byMcKinney authorized representatives. In the event of an acceptance ofPurchaser’s Purchase Order by McKinney, the Purchaser agrees that suchacceptance is solely conditioned on Purchaser’s acceptance of the termsand conditions set forth in this instrument, regardless of the terms andconditions specified in Purchaser’s Purchase Order. The terms andconditions in Purchaser’s Purchase Order which conflict with the terms andconditions of this instrument shall be disregarded and are hereby rejected,and this instrument shall constitute the entire agreement betweenMcKinney and the PurchaserIn the event that McKinney does not enforce or require strict performanceof any term or condition hereof, or any other document, instrument or otheragreement relating to goods sold, such lack of enforcement or requirementof strict performance will not waive, affect or diminish any right ofMcKinney to enforce or require strict performance of such term orcondition in the future.PRICESAll prices are subject to change without notice and are not guaranteed.All shipments will be made at prices in effect at the time of shipment.Possession of this price list does not constitute and agreement to sell.We reserve the right to correct clerical, stenographic and other obviouserrors at any time.TAXESIf under any law now or hereafter passed the seller is required to pay a taxon sales, or on an excise tax, the amount of these taxes will be added tothe invoice value.DELIVERYSeller shall not be liable for any delay in delivery, or failure to deliver, dueto any cause beyond the Seller's control, including but not limited to fires,floods, strikes, or other labor disputes, accidents to machinery, acts ofsabotage, riots, precedence or priorities granted at the request or for thebenefit, directly or indirectly, of the federal or any provincial governmentor any subdivision or agency thereof, delay in transportation or lack oftransportation facilities, restrictions imposed by the federal, provincial orother governmental legislation or rules or regulations thereof.CREDITAcceptance of orders and deliveries thereof shall at all times be subject toour approval of credit.PAYMENT TERMSOrders based on quotations for specific jobs will be invoiced at prices ineffect on the date such orders are accepted. Other orders will be invoicedat prices in effect on the date of shipment.Errors and omissions are subject to correction on acknowledgement whichin all circumstances supercedes all pricing shown herein.June 15, 2011Accounts are net cash 30 days or with 2% discount for cash if paid on orbefore the 10th of the month following the date of invoice.A charge of $50.00 will be made for itemization. A charge of $25.00 will bemade when changes are requested on itemized jobs already processed.No invoice will be rendered for less than $50.00 net.On non-standard items a 5% over or under run constitutes a complete order.TERMSIt is understood that McKinney may impose and charge a finance chargewhich is the lesser or one and one-half percent (1-1/2) per month of thehighest rate allowed by law on any amount which becomes past due anddelinquent. Additionally the Customer shall be responsible for all collectioncosts, court costs and reasonable attorney’s fees (where allowed by law)in connection with the recovery of any delinquent amount.NOTE: PRICES PER EACH NETPRODUCT WEIGHT INFORMATIONWeights indicated throughout this price list are approximate for brass,bronze or stainless steel base material. Aluminum base materials weighapproximately 1/3 the listed weights.WARRANTYMcKinney products are not designed for or intended for aftermarketmodification. The warranty on McKinney products becomes void if theproduct is modified in any way, regardless of whether the modificationcauses or contributes to any alleged defect. Warranty voiding modificationsinclude, but are not limited to, third-party electrification of non-electricproducts and/or the installation of non-approved or non-McKinneycomponents.If a McKinney product is modified it no longer meets industry certificationand quality control standards applicable to the original product and is nolonger a genuine McKinney product. A modified product may not be sold asa McKinney product and no McKinney trademarks or certification marksbased on the original McKinney product, such as (but not limited to) U.L. orANSI/BHMA marks, may appear anywhere on the modified product or onany packaging, literature or instructions sold with the modified product.All original McKinney packaging and literature carries McKinneytrademarks and must be destroyed if the original McKinney product ismodified. Portions of the product that carry a McKinney trademark orcertification mark must be discarded and/or replaced by the party makingthe modification. U.L. and other certification testing and markings arealso the responsibility of the party making the modification. The use ofMcKinney trademarks on modified products constitutes trademarkinfringement.TRADEMARKSMcKINNEY ® is a registered trademark of McKinney Manufacturing Company.Other product brand names may be trademarks or registered trademarksof their respective owners and are mentioned for reference purpose only.GEN-11.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited. 6/15/11

GEN-2GENERAL INFORMATIONJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11SHIPMENTSOnce in the hands of the Transportation Company, the Purchaser assumesthe risk of loss or damage in transit.All goods are F.O.B. shipping point via the most economical routing,with carrier chosen by us. Full freight prepaid on shipments withinContinental United States having a net value of $1,000 or more. *SpringHinges and Contract Hinges may be combined with Continuous Gear Hinges,Threshold, Weatherstrip or Architectural Door Trim to meet freight prepaid.If a different method of delivery is requested, the purchaser will beresponsible for any additional transportation charges.Shipments by Air, Parcel Post, Bus or Express are F.O.B. factory with nofreight allowance. There will be a $25.00 surcharge on all bus or parcelpost shipments. Handling charges on UPS, Air Freight or common carriershipments may apply.A charge of $15.00 will be made for notifying customers 24 hours inadvance of a truck delivery.There will be a $25.00 charge for furnishing proof of delivery. This chargewill be cancelled if delivery was not made.Orders marked WOG will be held for 10 days after being produced andthen shipped unless specifically marked for shipment with another P.O.CANCELLATIONSWe are unable to accept cancellations or changes on non-stock and specialordered (s/o) items once processing begins. A charge will be assessedbased on manufacturing expense incurred.RETURNED GOODSNo credit will be issued for returned goods unless such return isauthorized. If such authorization is given by us, there will be a minimumhandling charge of 45% or $50.00 which ever is greater, for stock itemsshipped within a 90 day period from the date of the request. Non stockmaterial (s/o) will be subjected to a minimum of 50% based upon selectapproval by the factory on an individual basis.CLAIMSInspect before you sign. If there is a shortage or damage, accept shipmentonly after freight agent makes a damage or shortage notation on yourfreight bill, bill of lading, or delivery receipt. If damage or loss is evident,notify your freight agent and request inspection within 10 days ofreceipt of goods. Shipments are packed in approved containers. Claimsmust be made within 30 days of shipment and are subject to approval.Claims made after 30 days will not be honored. Our responsibility fordamage, visible or concealed, ceases upon delivery to the transportationcompany.5 KNUCKLE BEARINGSWhile TA/ T4A part numbers are listed in this price book, TB/T4B isavailable at the same price listed.GEN-2

GEN-3GENERAL INFORMATIONMcKINNEY AND B.H.M.A. FINISH SYMBOLSJune 15, 2011B.H.M.A. Code Finish Description Base Material McKinney Equivalent600 Primed for Painting Steel USP605 Bright Brass Brass US3606 Dull Brass Brass US4609 Dull Brass, Oxidized Brass US5610 Brass, Nickel Oxidized, Bright Relieved Brass US7611 Bright Bronze Bronze US9612 Dull Bronze Bronze US10613 Antiqued Bronze, Oiled Bronze US10B616 Dull Bronze, Oxidized Bronze US11618 Bright Nickel Plated Brass, Bronze US14619 Dull Nickel Plated Brass, Bronze US15620 Nickel Oxidized Relieved Brass, Bronze US15A621 Half Polished Iron, Smooth Brass, Bronze US17A623 Statuary Bronze, Light Bronze US20624 Statuary Bronze, Dark Bronze US20A625 Bright Chromium Brass, Bronze US26626 Dull chromium Brass, Bronze US26D629 Polished Stainless Steel Stainless Steel US32300 Series630 Dull Stainless Steel Stainless Steel US32D300 Series632 Bright Brass Steel US3633 Dull Brass Steel US4636 Dull Brass, Oxidized Steel US7637 Bright Bronze Steel US9639 Dull Bronze Steel US10640 Antique Bronze, Oiled Steel US10B643 Dull Bronze, Oxidized Steel US11645 Bright Nickel Plated Steel US14646 Dull Nickel Plated Steel US15647 Nickel Oxidized Relieved Steel US15A648 Half Polished Iron, Smooth Steel US17A649 Statuary Bronze, Light Steel US20650 Statuary Bronze, Dark Steel US20A651 Bright Chromium Steel US26652 Dull Chromium Steel US26DGEN-31.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited. 6/15/11

Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11GEN-4GENERAL INFORMATIONMcKINNEY AND GOVERNMENTFINISH SYMBOLS June 15, 2011U.S. Finish Description McKinney PriceU.S.P. Prime Powder Coat for Painting P ListedU.S. 3 Bright Brass 3 ListedU.S. 4 Dull Brass 4 ListedU.S. 5 Dull Brass, Oxidized 5* P.O.A.U.S. 7 Brass, Nickel Oxidized, Bright Relieved 7* P.O.A.U.S. 9 Bright Bronze 9 P.O.A.U.S. 10 Dull Bronze 10 ListedU.S. 10A Antique Bronze, Oiled and Lacquered 10A ListedU.S. 10B Antique Bronze, Oiled 10B ListedU.S. 11 Dull Bronze, Oxidized 11* P.O.A.U.S. 14 Bright Nickel Plated 14 P.O.A.U.S. 15 Dull Nickel Plated 15 Same as 26DU.S. 15A Nickel Oxidized Relieved 15A* P.O.A.U.S. 17A Half Polished Iron, Smooth 17A* P.O.A.U.S. 20 Statuary Bronze, Light 20* P.O.A.U.S. 20A Statuary Bronze, Dark 20A* P.O.A.U.S. 26 Bright Chromium 26 ListedU.S. 26D Dull Chromium 26D ListedU.S. 32 Polished Stainless Steel 32 ListedU.S. 32D Dull Stainless Steel 32D Listed* Check with the factory for availability and pricing on these finishes4-GENMcKINNEY POWDER COAT FINISHESMicroShield Agion Antimicrobial 32DBIO POAAluminum AP ListedBeige PB Same as APGold PG Same as APGrey Tone GT Same as APTrue White PW Same as APBright Brass w/ Clear Powder Coat 3-C 20% over 26Dull Brass w/ Clear Powder Coat 4-C 20% over 26Dull Chrome Powder Coat CP Same as APChampagne Champagne P.O.A.*Dark Bronze Powder Coat D-3 Same as APBlack Powder Coat D-4 Same as APCustom Polymer CoatingPOAEvery effort is made by McKINNEY to furnish finishes which do comply with the Standard, however we cannotguarantee that our finish will match other manufacturers finish. Where a special finish or a matched finish isrequired, a sample must be submitted with the order.* P.O.A. – Price on Application – Consult the factory for pricing on these custom finishes.

GEN-5GENERAL INFORMATIONADDITIONS WHERE NOT LISTEDJune 15, 2011NO LOGOP.O.A.Hinges supplied less McKinney logo (not available on LISTED Hinges)BLANK HINGES (No Screw Holes)P.O.A.Blank hinges regularly furnished without swaging (flat back) unless otherwise specified.SPECIAL SWAGINGSpecial SwagingP.O.A.EXTRA FOR STAINLESS STEEL BALLS AND RACEWAYS ONSTEEL, BRASS OR BRONZE BALL BEARING HINGESon standard weight two ball bearing hingesAdd $12.77 per hingeon heavy weight four ball bearing hingesAdd $16.35 per hinge(on stainless steel hinges, stainless steel balls and raceways are standard)BRASS suffix BR or STAINLESS PINS suffix SSP3 1 ⁄2" - 4" Add $5.78 each4 1 ⁄2" - 5" Add $7.92 each6" or larger Add $10.75 eachReplacement steel pins standard weight Add $0.88 eachReplacement steel pins heavy weight Add $1.22 eachSpecify hinge type & finish when ordering pinsELECTRIC HINGE ADDITIONS - BRASS, BRONZE OR STEEL BASEConcealed Circuit (CC Option)With Quick Connectors (QC Option)Number of Wires Add Number of Wires Add2 Wires – suffix QC2 $168.84 per hinge4 wires – suffix CC4 $178.29 per hinge 4 Wires – suffix QC4 $197.02 per hinge6 wires – suffix CC6 $187.64 per hinge 6 Wires – suffix QC6 $206.42 per hinge8 wires – suffix CC8 $206.33 per hinge 8 Wires – suffix QC8 $225.13 per hingeAdd $15.00 to CC or QC Option for Swing Clear Butt HInges10 Wires – suffix QC10 $253.31 per hinge12 Wires – suffix QC12 $281.43 per hingeELECTRIC HINGE ADDITIONS - STAINLESS STEEL BASEConcealed Circuit (CC Option)With Quick Connectors (QC Option)Number of Wires Add Number of Wires Add2 Wires – suffix QC2 $196.80 per hinge4 wires – suffix CC4 $243.92 per hinge 4 Wires – suffix QC4 $262.68 per hinge6 wires – suffix CC6 $262.68 per hinge 6 Wires – suffix QC6 $281.43 per hinge8 wires – suffix CC8 $281.43 per hinge 8 Wires – suffix QC8 $300.21 per hinge10 Wires – suffix QC10 $328.36 per hinge12 Wires – suffix QC12 $356.17 per hingeELECTRIC HINGE ADDITIONS -Power over Ethernet (PoE Option)AddBrass Bronze or Steel Base $446.25 per hingeStainless Steel Base $519.75 per hingeExtra 6" Pig Tail for QC Option for butt hinges (see continuous hinge section for$11.27 Each per hingeExtra Long leads (over 12") 4 wires for CC option QC pigtails for continuous hinges) Add $3.76 per footExtra Long leads (over 12") 6 wires for CC option Add $5.38 per footExtra Long leads (over 12") 8 wires for CC option Add $7.00 per footMG16-2C Mortar Guard (Part #63333)$16.93 eachExtra heavy magnet & switch for MM hinges suffix MM x EHM Add $173.12 per hingeMagnetic monitoring suffix MM Add $156.62 per hingeMagnetic monitoring short switch suffix NS (1 1 /4" minimum frame) Add $156.62 per hingeGEN-51.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited. 6/15/11

GEN-6GENERAL INFORMATIONADDITIONS WHERE NOT LISTEDCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11GEN-6June 15, 2011NON REMOVABLE DOOR Suffix NRDModerne Hinge only (2 Knuckle) Add $6.42 per doorNON REMOVABLE PINSSet screw in barrel suffix NRP Add $3.88 eachRAISED BARREL FULL MORTISE HINGES, BEARING HINGES ONLYRaised barrel prefix RB 4 1 /2 x 4 1 /2 Size 5 Knuckle only. Add $20.63 eachHinges are NRP and reversible for handingROUND CORNER Prefix RC1/4" round corner full mortise only Add $ 4.95 each5/32" round corner full mortise 4 - 1/2" or larger Add $ 4.95 eachRound corner hinges (RC) will be furnished in 1 /4" radius unless otherwise specified.BEVELED HINGES (where doors are beveled on hinge side specify as follows)For 2 knuckle and 3 knuckle hinges use 5000 series. Example TA793 or TA792 will become TA5793 or TA5792.For 2 knuckle and 5 knuckle hinges use a 4000 series. Example TA2714 or T4A3386 will become a TA4714 or T4A4386.TA2731 will become a TA4731, A TA3350 becomes a TA4350.•Price remains the same as square edge hinge •Indicate hand when orderingSAFETY STUD FEATURE Suffix SSFAdd $11.56 eachPRISON SAFETY FEATURE Suffix PSF*Add $13.70 each*available on HTA786 or HTA386 (32D) onlySLIP IN HINGES Suffix SIH Type I (Handed), SIH Type IIRegular weight bearing hinge onlyAdd $24.65 each•Indicate hand when orderingSPECIAL SCREWS ( 1 /2 x 12-24 machine - 1 1 /4 x 12 wood)*Spanner heads suffix SHS, machine screws provided. Wood screws by request onlySteel$0.84 eachBrass$1.16 eachStainless Steel$2.22 eachSpanner bit holder tool$32.59 eachSpanner bit (for use in holder)$22.14 eachTORX Pin head security screws - Suffix TXS, machine screws provided. Wood screws by request onlySteel$0.35 eachStainless$.60 each#20 - 1/2X12-24 & 1-1/4 x 12 wood screw#25 - 1/2x1/4-20 machine screw, 1-1/2x12 wood screwTORX bit$22.65 eachTORX bit holder tool$32.59 each*Consult factory for price and minimum requirements on additional sizes.Contract grade hinges are packed all machine x all wood screwsTIPSHOSPITAL TIPS Prefix HRegular weight plain bearing, oil impregnated or ballHeavy weight oil impregnated or ballSolid Brass BALL TIPS suffix x BT up to 6" in heightSolid Brass STEEPLE TIPS suffix x ST up to 6" in heightArchitectural Hardware Finish Presentation Folder FS86Architectural Hardware Hinge Display Board 81208Perforated cardboard shimsAdd $19.04 eachAdd $19.04 eachAdd $20.66 eachAdd $20.66 each$57.75 net$625.00 net$8.09 per hundred

GEN-7GENERAL INFORMATIONTABLE OF CONTENTSJune 15, 2011Full Mortise Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FM-1–FM-63Electric Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EL-1–EL-18Full Mortise Anchor Hinge Sets . . . . . . . . . . . . . . . . . . . . . . . . .FMA-1–FMA-14Half Mortise Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HM-1–HM-10Half Surface Hinges and Back Plates . . . . . . . . . . . . . . . . . . . . .HS-1–HS-12Full Surface Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FS-1–FS-12Spring Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP-1–SP-12Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GEN-1–GEN-5MacPro Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FM62–FM63, SP-3Pivots & Miscellaneous Hardware . . . . . . . . . . . . . . . . . . . . . . .MISC-1–MISC-2Filler Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MISC-3-MISC-4Face Fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MISC-4Hinge reinforcements & Shims . . . . . . . . . . . . . . . . . . . . . . . . . .MISC-5Power Transfer Locator Templates . . . . . . . . . . . . . . . . . . . . . . .CG-26-CG27Specialty Hinges and Miscellaneous . . . . . . . . . . . . . . . . . . . . . .SPEC-1–SPEC-2Designer Hardware - Deco Tips . . . . . . . . . . . . . . . . . . . . . . . . .DH-1-DH-6Residential Grade Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RES-1–RES-3StormPro Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SPEC-1Transfer Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TD-1-TDAluminum Continuous Hinges . . . . . . . . . . . . . . . . . . . . . . . . . .CG-1–CG-8Stainless Steel Continuous Hinges . . . . . . . . . . . . . . . . . . . . . . .CG-9–CG-15Stainless Steel Door Edge Guards . . . . . . . . . . . . . . . . . . . . . . . .CG-24–CG-25Steel Continuous Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CG-17–CG-23GEN-71.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited. 6/15/11

GEN-8GENERAL INFORMATIONINDEXJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.35 . . . . . . . . . . . . . . .Discontinued451 . . . . . . . . . . . . . .SP-4452 . . . . . . . . . . . . . .SP-4453 . . . . . . . . . . . . . .SP-41001 . . . . . . . . . . . . .SP-5, SP-61400 . . . . . . . . . . . . .RES-11414 . . . . . . . . . . . . .RES-21458 . . . . . . . . . . . . .RES-31502, 1502R . . . . . .SP-11522 . . . . . . . . . . . . .SP-21552 . . . . . . . . . . . . .SP-21572 . . . . . . . . . . . . .SP-33001 . . . . . . . . . . . . .SP-84007-MRB . . . . . . .SP-94007RB . . . . . . . . . .SP-98007 . . . . . . . . . . . . .SP-109001 . . . . . . . . . . . . .SP-619001 . . . . . . . . . . . .SP-6BP-10 . . . . . . . . . . .HS-12BP-11 . . . . . . . . . . . .HS-12BP-12 . . . . . . . . . . .HS-12CS1 . . . . . . . . . . . . .SP-4CSS-9 . . . . . . . . . . .MISC-1DLS-8 . . . . . . . . . . .MISC-1DS-6 . . . . . . . . . . . .MISC-1EG308 . . . . . . . . . . .CG-26EG-C308 . . . . . . . . .CG-26EG-T308 . . . . . . . . .CG-26EP-5J . . . . . . . . . . . .MISC-2ET HINGES . . . . . .FM-12–FM-20H8007 . . . . . . . . . . .SP-10HS1001 . . . . . . . . . .SP-7HS3703 . . . . . . . . . .CG-25HTA386 . . . . . . . . . .FM-4HTA714 . . . . . . . . . .FM-8HTA786 . . . . . . . . . .FM-10HTA2714 . . . . . . . . .FM-22HTB386 . . . . . . . . . .FM-4HTB786 . . . . . . . . . .FM-10ICHTB386 . . . . . . . .DiscontinuedJ3001 . . . . . . . . . . . .SP-8MCK-12HD . . . . . .CG-3MCK-14HD . . . . . .CG-4MCK-22HD . . . . . .CG-5MCK-25HD . . . . . .CG-6MCK-54HD . . . . . .CG-8MCK-58HD . . . . . .CG-9MCK-WTHD . . . . .CG-3MCK-FM300 . . . . .CG-16MCK-FM327 . . . . .CG-19MCK-FM3500 . . . .CG-23MCK-FS301 . . . . . .CG-20MCK-FS302 . . . . . .CG-21MCK-FS309 . . . . . .CG-21MCK-FS321 . . . . . .CG-22MCK-FS3501 . . . . .CG-23MCK-FS3502 . . . . .CG-24MCK-FM3700 . . . .CG-25MCK-FS3701 . . . . .CG-25MCK-FS3702 . . . . .CG-25MCK-HG305 . . . . .CG-16MCK-HG306 . . . . .CG-19MCK-HG310 . . . . .CG-22MCK-HG311 . . . . . .CG-20MCK-HG315 . . . . .CG-17MCK-HG322 . . . . .CG-17MCK-HG323 . . . . .CG-18MCK-HG326 . . . . .CG-18MCK-HM304 . . . . .CG-19MG-16 . . . . . . . . . . .GEN-4MP79 . . . . . . . . . . . .FM62MPB79 . . . . . . . . . .FM63MPS60 . . . . . . . . . . .SP-3MPS679 . . . . . . . . . .FM-63MPS68 . . . . . . . . . . .FM-63MPS91 . . . . . . . . . . .FM-63MPS99 . . . . . . . . . . .FM-63PH-4 . . . . . . . . . . . .SPEC-1SP3786 . . . . . . . . . .SPEC-1SP3386 . . . . . . . . . .SPEC-1T714 . . . . . . . . . . . .FM-5, FM-6T2314 . . . . . . . . . . .FM-21, FM-22T2714 . . . . . . . . . . .FM-26, FM-27T2731 . . . . . . . . . . .FM-31–FM-33T2772 . . . . . . . . . . .HS-5T2774 . . . . . . . . . . .HM-5TA314 . . . . . . . . . . .FM-1, FM-2TA371 . . . . . . . . . . .FS-1TA372 . . . . . . . . . . .HS-1TA374 . . . . . . . . . . .HM-1TA381 . . . . . . . . . . .FS-2TA382 . . . . . . . . . . .HS-2TA384 . . . . . . . . . . .HM-2TA386 . . . . . . . . . . .FM-3TA391 . . . . . . . . . . .FMA-1TA392 . . . . . . . . . . .FMA-2TA393 . . . . . . . . . . .FMA-3TA394 . . . . . . . . . . .FMA-4TA714 . . . . . . . . . . .FM-7, FM-8TA771 . . . . . . . . . . .FS-3TA772 . . . . . . . . . . .HS-3TA774 . . . . . . . . . . .HM-3TA781 . . . . . . . . . . .FS-4TA782 . . . . . . . . . . .HS-4TA784 . . . . . . . . . . .HM-3TA786 . . . . . . . . . . .FM-9TB786 . . . . . . . . . . .FM-10TA789 . . . . . . . . . . .HM-4TA791 . . . . . . . . . . .FMA-8TA792 . . . . . . . . . . .FMA-9TA793 . . . . . . . . . . .FMA-10TA794 . . . . . . . . . . .FMA-11TA797 . . . . . . . . . . .FS-5TA795 . . . . . . . . . . .FM-11TA796 . . . . . . . . . . .HS-4TA2314 . . . . . . . . . .FM-23, FM-24TA2395 . . . . . . . . . .FM-25TA2398 . . . . . . . . . .FM-25TA2714 . . . . . . . . . .FM-28, FM-29TA2731 . . . . . . . . . .FM-33–FM-36TA2771 . . . . . . . . . .FS-6TA2772 . . . . . . . . . .HS-5TA2774 . . . . . . . . . .HM-5TA2798 . . . . . . . . . .FM-37, FM-38TA2895 . . . . . . . . . .FM-39TA3313 . . . . . . . . . .FM-39, FM-40TA3331 . . . . . . . . . .FM-41–FM-44TA3350 . . . . . . . . . .FM-45, FM-46TA3374 . . . . . . . . . .HM-6TA3713 . . . . . . . . . .FM-52TA3750 . . . . . . . . . .FM-52, FM-53TA5392 . . . . . . . . . .FMA-5TA5393 . . . . . . . . . .FMA-6TA5394 . . . . . . . . . .FMA-7TA5792 . . . . . . . . . .FMA-12TA5793 . . . . . . . . . .FMA-13TA5794 . . . . . . . . . .FMA-14TA2314BT . . . . . . . .FM-16TA2314ST . . . . . . . .FM-16TCA2314 . . . . . . . . .FM-25TCA2714 . . . . . . . . .FM-30TCA2771 . . . . . . . . .FS-6TCA2772 . . . . . . . . .HS-6TCA2774 . . . . . . . . .HM-5TCA3374 . . . . . . . . .HM-6TCA3381 . . . . . . . . .FS-8TCA3382 . . . . . . . . .HS-8TCA3384 . . . . . . . . .HM-8TCA3386 . . . . . . . . .FM-49TCA3781 . . . . . . . . .FS-11TCA3782 . . . . . . . . .HS-10TCA3784 . . . . . . . . .HM-10TCA3786 . . . . . . . . .FM-59T4A3381 . . . . . . . . .FS-7T4A3382 . . . . . . . . .HS-7T4A3384 . . . . . . . . .HM-7T4A3385 . . . . . . . . .FS-9 DiscontinuedT4A3386 . . . . . . . . .FM48-FM51T4A3395 . . . . . . . . .FM-51T4A3781 . . . . . . . . .FS-10T4A3782 . . . . . . . . .HS-9T4A3784 . . . . . . . . .HM-9T4A3785 . . . . . . . . .FS-12 DiscontinuedT4A3786 . . . . . . . . .FM-54–FM-57T4A3795 . . . . . . . . .FM-60T4A3796 . . . . . . . . .HS-11T4A3797 . . . . . . . . .FS-12T4A3789 . . . . . . . . .HM-10T4A4795 . . . . . . . . .FM-60TA4895 . . . . . . . . . .FM-61T6A3386 . . . . . . . . .FM-48T6A3786 . . . . . . . . .FM-586/15/11GEN-8

GEN-9GENERAL INFORMATIONTOP TEN ORDERING TIPSJune 15, 2011We appreciate your orders with or without questions!Our goal is to provide you with the best service in this industry!Reducing the frequency of question orders allows us to better serve you!1. Clarity• If we canʼt read your order, chances are it may beprocessed incorrectly• Check the font sizes of your address, phone and faxnumbers. A font size of 12 is recommended foryour order2. Processing Information• A valid purchase order number is necessary toprocess your order• Please be sure to include your account number,Bill to and Ship to address, any special markings orspecial packing instructions• Include your requested method of shipping• Include your requested shipping date• It is important for you to sign or list your name on thepurchase order in case we need to contact youabout your order3. Pricing• Is this order based upon your standard buyingprogram• If this order is based upon a quotation, pleaseinclude quotation number so that we may properlyprice your order4. Type of Hinge• Full Mortise, Half Mortise, Full Surface, Half Surface• Standard Weight, Heavy Weight• Bearing, Non Bearing• Ferrous, Non Ferrous• Butt, Spring Hinge, Continuous Hinge, Pivot5. Size• We carry butt hinges in sizes from 3-1/2" x 3-1/2"up to 8" x 8"• Height is the first dimension• Width is the second dimension• Wide throw hinges are available up to 8" in width• Continuous Hinges are available in sizes from 79" to120" (or custom sized below these lengths)• Door Edge Guards are available in sizes up to 120"6. Finish• McKinney Provides all BHMA Standard Finishes aswell as McKinney Powder Coat Finishes7. Handing• 2-Knuckle Hinges, CS- Electric Hinges, AnchorHinges, continuous hinges with electricalmodification, PT prep or custom cut• CSS-9 Combination Strike & Stop and the DLS-8Double Lipped Strike are prepared for either centeror offset hung applications. This must be specifiedalong with the size.8. Options• Options listed in the General Information Section ofthe Price Book are available on most Full Mortisehinges, however, we list available options for eachhinge on the individual catalog page. Refer to thecatalog page to be sure the option you are specifyingis available on the particular hinge you want.• For PT prep on Continuous Hinges, please providethe model of the unit we need to prepare for as wellas the dimension FROM THE TOP OF THE HINGEDOWN. Your order cannot be processed without thespecific dimensions either to the top of the cut outor the center line of the cut out. We also need thehanding for these units. Please fill out and faxthe PT templates with your order. See pages CG26and CG27 for these templates.• Electric Options for Continuous Hinges need tospecify number of wires and handing, along withthe location of the electrical prep from the top of thehinge to the centerline of the prep. All electriccontinuous hinges are supplied with a 4-amp fuse.Not installing this fuse voids the warranty.9. Customization• Consult the factory regarding any customization.10.EDI — ELECTRONICALLY TRANSMITTED ORDERS• Have you considered our EDI option?• McKINNEY EDI is available• Please consult the factory for further informationGEN-91.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited. 6/15/11

These items are in stock at 1600 12TH Street, NE, Mason City, IA 50401.Phone 641-494-1683 Fax 641-422-1965.Pick up orders must be placed by noon.STEEL HINGESFull Mortise Standard Weight,Five Knuckle3 1/2X3 1/2 T2714 10B3 1/2X3 1/2 T2714 26D4X4 T2714 10B4 1/2X4 TA2714 26D4 1/2X4 1/2 T2714 P4 1/2X4 1/2 T2714 10B4 1/2X4 1/2 T2714 264 1/2X4 1/2 T2714 26D4 1/2X4 1/2 T2714 26D NRP4 1/2X4 1/2 TA2714 P4 1/2X4 1/2 TA2714 P NRP4 1/2X4 1/2 TA2714 34 1/2X4 1/2 TA2714 44 1/2X4 1/2 TA2714 104 1/2X4 1/2 TA2714 10B4 1/2X4 1/2 TA2714 264 1/2X4 1/2 TA2714 26D4 1/2X4 1/2 TA2714 26D NRP5X4 1/2 TA2714 26DFull Mortise Standard Weight,Three Knuckle4 1/2X4 1/2 TA714 26DFull Mortise Heavy Weight,Five Knuckle4 1/2X4 1/2 T4A3786 10B4 1/2X4 1/2 T4A3786 26D4 1/2X4 1/2 T4A3786 26D NRP5X4 1/2 T4A3786 P5X4 1/2 T4A3786 P NRP5X4 1/2 T4A3786 26D5X4 1/2 T4A3786 26D NRPMason City Stock List - June 2011MacPro SeriesFull Mortise Standard Weight4 1/2x4 1/2 MP79 34 1/2X4 1/2 MP79 44 1/2X4 1/2 MP79 4 NRP4 1/2x4 1/2 MP79 264 1/2X4 MP79 P NRP4 1/2X4 MPB79 26D4 1/2X4 1/2 MP79 26D NRP4 1/2X4 MPB79 44 1/2X4 MPB79 4 NRP4 1/2X4 MPB79 P4 1/2X4 MPB79 P NRP4 1/2X4 1/2 MP79 26D4 1/2X4 1/2 MP79 26D NRP4 1/2X4 1/2 MP79 44 1/2X4 1/2 MP79 4 NRP4 1/2X4 1/2 MP79 P4 1/2X4 1/2 MPB79 26D4 1/2X4 1/2 MPB79 26D NRP4 1/2X4 1/2 MPB79 P4 1/2X4 1/2 MPB79 P NRP4 1/2x4 1/2 MPB91 32D4 1/2x 4 1/2 MPB91 32D NRPMacPro SeriesFull Mortise Heavy Weight4 1/2X4 1/2 MPB68 26D4 1/2X4 1/2 MPB68 26D NRP4 1/2X4 1/2 MPB99 32D4 1/2X4 1/2 MPB99 32D NRPNON-FERROUSFull Mortise Standard Weight,Five Knuckle4 1/2x4 1/2 TA2314 10B4 1/2x4 1/2 TA2314 26D4 1/2x4 1/2 TA2314 26D NRP4 1/2x4 1/2 TA2314 32D4 1/2x4 1/2 TA2314 32D NRPNON-FERROUSFull Mortise Heavy Weight,Five Knuckle4 1/2X4 1/2 T4A3386 32D4 1/2X4 1/2 T4A3386 32D NRPDouble Acting Spring Hinges& Pivots4 HS1001 26D4 1001 2C5 1001 26D6 1001 2C6 1001 26D6x4 1/2 1001 P6x4 1/2 1001 2C6x4 1/2 1001 26D6x4 1/2 1001 10A8 9001 26DJ3001 26D4007 RB 26D4007 MRB 26D1.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

These items are in stock at 225 Episcopal Road, Berlin CT 06037Phone 800-346-7707 - Fax 800-541-1073.Pick up orders must be placed by noon.STEEL HINGESFull Mortise Standard Weight,Two Knuckle4 1/2X4 T2731 D3 RH4 1/2X4 T2731 D3 LH4 1/2X4 T2731 D4 RH4 1/2X4 T2731 D4 LH4 1/2X4 T2731 26 LH4 1/2X4 T2731 26 RH4 1/2X4 T2731 26D RH4 1/2X4 T2731 26D LH4 1/2X4 TA2731 D3 RH4 1/2X4 TA2731 D3 LH4 1/2X4 TA2731 26D RH4 1/2X4 TA2731 26D LH4 1/2X4 1/2 T2731 26D RH4 1/2X4 1/2 T2731 26D LH4 1/2X4 1/2 TA2731 26D RH4 1/2X4 1/2 TA2731 26D LHFull Mortise Standard Weight,Three Knuckle3 1/2X3 1/2 TA714 26D3 1/2X3 1/2 TA714 154X4 TA714 26D4 1/2X4 TA714 154 1/2X4 1/2 T714 26D4 1/2X4 TA714 26D4 1/2X4 TA714 10B4 1/2X4 TA714 264 1/2 X 4 TA714 26D ET4 1/2X4 1/2 TA714 26D4 1/2X4 1/2 TA714 P4 1/2X4 1/2 TA714 104 1/2X4 1/2 TA714 10B4 1/2X 4 1/2 TA714 154 1/2X4 1/2 TA714 264 1/2X4 1/2 TA714 34 1/2X4 1/2 TA714 10A4 1/2X4 1/2 TA714 26D NRP4 1/2X4 1/2 TA714 26D ET4 1/2X4 TA714 26D NRP4 1/2X4 1/2 TA714 26D NRP5X4 1/2 TA714 26D5X4 TA714 26DFull Mortise Standard Weight,Five Knuckle3 1/2X3 1/2 T2714 153 1/2X3 1/2 T2714 P3 1/2X3 1/2 T2714 33 1/2X3 1/2 T2714 26D3 1/2X3 1/2 T2714 104 1/2 X 4 RCTA2714 D4 NRP4 1/2X4 1/2 T2714 10B4 1/2X4 1/2 T2714 P4 1/2X4 1/2 T2714 P NRP4 1/2X4 1/2 T2714 154 1/2X4 1/2 T2714 264 1/2X4 1/2 T2714 26D4 1/2X4 1/2 T2714 10A4 1/2X4 1/2 T2714 44 1/2X4 1/2 T2714 34 1/2X4 1/2 T2714 104 1/2X4 1/2 T2714 26D NRPBerlin Stock List - June 20114 1/2X4 1/2 T2714 D44 1/2X4 1/2 TA2714 D44 1/2X4 1/2 TA2714 P4 1/2X4 1/2 TA2714 P NRP4 1/2X4 1/2 TA2714 4 NRP4 1/2X4 1/2 TA2714 44 1/2X4 1/2 TA2714 34 1/2X4 1/2 TA2714 10A4 1/2X4 1/2 TA2714 104 1/2X4 1/2 TA2714 10 NRP4 1/2X4 1/2 TA2714 3 NRP4 1/2X4 1/2 TA2714 154 1/2X4 1/2 TA2714 264 1/2X4 1/2 TA2714 26 NRP4 1/2X4 1/2 TA2714 26D4 1/2X4 1/2 TA2714 26D NRP4 1/2X4 1/2 TA2714 10B4 1/2X4 1/2 TA2714 10B NRP4 1/2X4 1/2 TB2714 26D4 1/2X4 1/2 TB2714 26D NRP4 1/2X4 TCA2714 26D4 1/2X4 1/2 TCA2714 26D5X4 TA2714 26D5X4 1/2 T2714 26D5X4 1/2 TA2714 105X4 1/2 TA2714 26D5X4 1/2 TA2714 155X4 1/2 TA2714 10B5X4 1/2 TA2714 26D NRP5X5 TA2714 26D5X5 TA2714 10BFull Mortise Heavy Weight,Three Knuckle4 1/2X4 1/2 TA786 104 1/2X4 1/2 TA786 10B4 1/2X4 1/2 TA786 154 1/2X4 1/2 TA786 NRP 154 1/2X4 1/2 TA786 26D4 1/2X4 1/2 TA786 26D NRP5X4 1/2 TA786 26D5X5 TA786 26DFull Mortise Heavy Weight,Five Knuckle4 1/2X4 1/2 T4A3786 34 1/2X4 1/2 T4A3786 44 1/2X4 1/2 T4A3786 10B4 1/2X4 1/2 T4A3786 10A4 1/2X4 1/2 T4A3786 154 1/2X4 1/2 T4A3786 P4 1/2X4 1/2 T4A3786 264 1/2X4 1/2 T4A3786 104 1/2X4 1/2 T4A3786 26D4 1/2X4 1/2 T4A3786 10B4 1/2X4 1/2 T4A3786 P NRP4 1/2X4 1/2 T4A3786 26D4 1/2X4 1/2 T4B3786 26D4 1/2X4 1/2 T4B3786 26D4 1/2X4 1/2 T4A3786 26D4 1/2X4 1/2 T4A3786 264 1/2X4 1/2 TCA3786 26D5X4 1/2 T4A3786 P5X4 1/2 T4A3786 26D5X4 1/2 T4A3786 105X4 1/2 T4A3786 26D NRP5X4 1/2 T4A3786 10A5X4 1/2 T4A3786 10B5X4 1/2 T4A3786 265X4 1/2 T4B3786 26D5X4 1/2 T4A3786 155X5 T4A3786 26D5X5 T4A3786 10BFull Mortise Standard Weight,Swing Clear4 1/2 TA2895 26D4 1/2 TA4895 26DFull Mortise Heavy Weight,Swing Clear4 1/2 TA795 26D5 TA795 26D4 1/2 T4A3795 26D4 1/2 T4A4795 26D5 T4A3795 26D5 T4A3796 26D5 T4A4795 26DFull Mortise Hospital Tip4 1/2X4 HTA714 26D4 1/2X4 1/2 HTA714 26D4 1/2X4 HTA786 26D4 1/2X4 1/2 HTA2714 26D5X4 1/2 HTA2714 26D4 1/2X4 1/2 HT4A3786 26D5X4 1/2 HT4A3786 26DFull Mortise Anchor Sets5X4 1/2 TA792 26D RH5X4 1/2 TA792 26D LH5X4 1/2 TA5792 26D RH5X4 1/2 TA5792 26D LHHalf Mortise Standard Weight4 1/2 TA2774 P4 1/2 TA2774 26DHalf Surface4 1/2 TA772 26D4 1/2 TA2772 P4 1/2 TA2772 26D5 TA2772 26D5 T4A3782 26D6 T4A3782 26D 2 1/4 DR4 1/2 T4A3782 26D6 T4A3782 26D 1 3/4 DRBack Plates for Half Surface4 1/2 BP-10 26DElectric Hinges4 1/2X4 TA714 26D CC44 1/2X4 1/2 TA714 26D CC44 1/2X4 TA2714 26D CC44 1/2X4 1/2 TA2714 26D CC45X4 1/2 T4A3786 26D CC44 1/2 X 4 1/2 TA2714 26D CC64 1/2 X 4 TA2714 26D CC84 1/2X4 1/2 TA2714 26D CC85 X 4 1/2 T4A3786 26D CC84 1/2 X 4 1/2 TA2714 26D QC4Continued...1.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

These items are in stock at 225 Episcopal Road, Berlin CT 06037Phone 800-346-7707 - Fax 800-541-1073.Pick up orders must be placed by noon.Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/114 1/2 X 4 1/2 T4A3786 26D QC44 1/2 X 4 1/2 TA2714 26D QC64 1/2 X 4 1/2 T4A3786 26D QC64 1/2 X 4 1/2 TA2714 26D QC84 1/2 X 4 1/2 T4A3786 26D QC85X4 1/2 T4A3786 26D QC84 1/2 X 4 1/2 TA2714 26D QC12Wire Harness Transfer DevicesQC-RM4 MALE PLUG (4CKT)QC-RM8 MALE PLUG (8CKT)QC-MT2024 MALE TERMINRPAL(AWG 20-24)QC-C003 12 WIRE 22AWG 3 INCH-QC-C006 12 WIRE 22AWG 6 INCH-QC-C012 12 WIRE 22AWG 12 INCH-QC-C200 12 WIRE 22AWG 26 INCH-QC-C206 12 WIRE 22AWG 32 INCH-QC-C300 12 WIRE 22AWG 38 INCH-QC-C306 12 WIRE 22AWG 44 INCH-QC-C400 12 WIRE 22AWG 50 INCH-QC-C1500 12 WIRE 22AWG 15 FT,2 INCH-QC-C003P 12 WIRE AWG 3 INCH-QC-C006P 12 WIRE AWG 6 INCH-QC-C012P 12 WIRE 22AWG 12 INCH-QC-C200P 12 WIRE 22AWG 26 INCH-QC-C206P 12 WIRE 22AWG 32 INCH-QC-C300P 12 WIRE 22AWG 38 INCH-QC-C306P 12 WIRE 22AWG 44 INCH-QC-C400P 12 WIRE 22AWG 50 INCH-QC-C1500P 12 WIRE 22AWG 15 FT,2 INCH-Full Mortise Single Acting Spring4 1/2X4 1502 154 1/2X4 1502 26D4 1/2X4 1502 264 1/2X4 1/2 1502 P4 1/2X4 1/2 1502 104 1/2X4 1/2 1502 10B4 1/2X4 1/2 1502 154 1/2X4 1/2 1502 26D4 1/2X4 1/2 1502 264 1/2X4 1/2 1502 34 1/2X4 1/2 1522 26DSteel Door Spring451 D4452 D4453 D4MiscellaneousCSS-9 5 3/4 26D Center HungCSS-9 5 3/4 26D Offset HungDS-6 26DEP-5 26DPH-4 26DFS-86 SAMPLE CASECardboard ShimsBerlin Stock List - June 2011NON-FERROUSFull Mortise Standard Weight,Three Knuckle4 1/2X4 TA314 32D NRP4 1/2X4 1/2 TA314 32D4 1/2X4 1/2 TA314 32D NRPFull Mortise Standard Weight,Five Knuckle4X4 T2314 10B4X4 T2314 32D4X4 TA2314 32D4X4 TA2314 10B4 1/2X4 1/2 T2314 32D4 1/2X4 1/2 T2314 32D NRP4 1/2X4 1/2 T2314 10B4 1/2X 4 1/2 T2314 264 1/2X4 TA2314 32D4 1/2X4 TA2314 26D NRP4 1/2X4 TA2314 32D NRP4 1/2X4 1/2 TA2314 10B4 1/2X4 1/2 TA2314 10B NRP4 1/2X4 1/2 TA2314 P NRP4 1/2X4 1/2 TA2314 44 1/2X4 1/2 TA2314 324 1/2X4 1/2 TA2314 34 1/2X4 1/2 TA2314 26D4 1/2X4 1/2 TA2314 10 NRP4 1/2X4 1/2 TA2314 26D NRP4 1/2X4 1/2 TA2314 32D4 1/2X4 1/2 TA2314 32D NRP4 1/2X4 1/2 TA2314 3 NRP4 1/2X4 1/2 TA2314 4 NRP4 1/2X4 1/2 TB2314 26D NRP4 1/2X4 RCTA2314 32D NRP5X4 1/2 TA2314 32D5X4 1/2 TA2314 10B5X4 1/2 TA2314 32D NRP5X5 TA2314 10B5X5 TA2314 32D NRPFull Mortise Heavy Weight,Three Knuckle4 1/2X4 1/2 T4A3386 32D4 1/2X4 1/2 T4A3386 44 1/2X4 1/2 T4A3386 324 1/2X4 1/2 T4A3386 34 1/2X4 1/2 T4A3386 10B4 1/2X4 1/2 T4A3386 26D4 1/2X4 1/2 T4A3386 P NRP4 1/2X4 1/2 T4A3386 26D4 1/2X4 1/2 T4A3386 10 NRP4 1/2X4 1/2 T4A3386 32D4 1/2X4 1/2 T4A3386 10B4 1/2X4 1/2 HT4A3386 32D4 1/2X4 1/2 T4B3386 32D5X4 1/2 T4A3386 10B NRP5X4 1/2 T4A3386 105X4 1/2 T4A3386 32D5X4 1/2 T4A3386 32D NRP5X5 T4A3386 32D NRP5X5 T4A3386 10B NRP6X5 T4A3386 32D NRPFull Mortise Swing Clear4 1/2 T4A3395 32D5 T4A3395 32DFull Mortise Hospital Tip4 1/2 X4 1/2 HTA2314 324 1/2 X4 HTA314 32D4 1/2X4 1/2 HTA314 32D4 1/2X4 1/2 HTB386 32DFull Mortise Anchor Sets5X4 1/2 TA392 32D RH5X4 1/2 TA392 32D LH5X4 1/2 TA5392 32D RH5X4 1/2 TA5392 32D LHFull Mortise Single Acting Spring4 1/2X4 1552 32D4 1/2X4 1/2 1552 32DMacPro Series4 1/2X4 1/2 MPB79 34 1/2X4 1/2 MPB79 3 NRP4 1/2X4 MP79 44 1/2X4 MP79 4 NRP4 1/2X4 1/2 MPB79 44 1/2X4 1/2 MPB79 4 NRP4 1/2X4 1/2 MPB79 10B4 1/2X4 1/2 MPB79 10B NRP4 1/2X4 1/2 MPB79 264 1/2X4 MP79 26D4 1/2X4 MP79 26D NRP4 1/2X4 1/2 MPB79 26D4 1/2X4 1/2 MPB79 26D NRP4 1/2X4 MP79 P4 1/2X4 MP79 P NRP4 1/2X4 1/2 MPB79 P4 1/2X4 1/2 MPB79 P NRP4 1/2X4 1/2 MPB91 32D4 1/2X4 1/2 MPB91 32D NRP4 1/2X4 1/2 MP79 34 1/2X4 MPB79 44 1/2X4 MPB79 4 NRP4 1/2X4 1/2 MP79 44 1/2X4 1/2 MP79 4 NRP4 1/2X4 1/2 MP79 264 1/2X4 MPB79 26D4 1/2X4 MPB79 26D NRP4 1/2X4 1/2 MP79 26D4 1/2X4 1/2 MP79 26D NRP4 1/2X4 MPB79 P4 1/2X4 MPB79 P NRP4 1/2X4 1/2 MP79 P4 1/2X4 1/2 MP79 P NRP4 1/2X4 1/2 MPB68 26D HV4 1/2X4 1/2 MPB68 26D NRP4 1/2X4 1/2 MPB99 32D HV4 1/2X4 1/2 MPB99 32D NRP4 1/2X4 1/2 MPS60 26D4 1/2X4 1/2 MPB679 26D4 1/2X4 1/2 MPS60 PFor other items check with the factory onthe extensive list of products which areavailable for immediate shipment.

These items are in stock at 260 Santa Fe Street, Pomona CA 91767Phone 909-593-2100 - Fax 909-593-2500.Daily pickup orders must be placed by noon.STEEL HINGESFull Mortise Standard Weight,Five Knuckle3 1/2X3 1/2 T2714 10B3 1/2X3 1/2 T2714 26D4X4 T2714 10B4 1/2X4 TA2714 26D4 1/2X4 1/2 T2714 P4 1/2X4 1/2 T2714 10B4 1/2X4 1/2 T2714 264 1/2X4 1/2 T2714 26D4 1/2X4 1/2 T2714 26D NRP4 1/2X4 1/2 TA2714 P4 1/2X4 1/2 TA2714 P NRP4 1/2X4 1/2 TA2714 34 1/2X4 1/2 TA2714 44 1/2X4 1/2 TA2714 104 1/2X4 1/2 TA2714 10B4 1/2X4 1/2 TA2714 264 1/2X4 1/2 TA2714 26D4 1/2X4 1/2 TA2714 26D NRP5X4 1/2 TA2714 26DFull Mortise Standard Weight,Three Knuckle4 1/2X4 1/2 TA714 26DFull Mortise Heavy Weight,Five Knuckle4 1/2X4 1/2 T4A3786 10B4 1/2X4 1/2 T4A3786 26D4 1/2X4 1/2 T4A3786 26D NRP5X4 1/2 T4A3786 P5X4 1/2 T4A3786 P NRP5X4 1/2 T4A3786 26D5X4 1/2 T4A3786 26D NRPSan Leandro Stock List - June 2011MacPro SeriesFull Mortise Standard Weight4 1/2x4 1/2 MP79 34 1/2X4 1/2 MP79 44 1/2X4 1/2 MP79 4 NRP4 1/2x4 1/2 MP79 264 1/2X4 MP79 P NRP4 1/2X4 MPB79 26D4 1/2X4 1/2 MP79 26D NRP4 1/2X4 MPB79 44 1/2X4 MPB79 4 NRP4 1/2X4 MPB79 P4 1/2X4 MPB79 P NRP4 1/2X4 1/2 MP79 26D4 1/2X4 1/2 MP79 26D NRP4 1/2X4 1/2 MP79 44 1/2X4 1/2 MP79 4 NRP4 1/2X4 1/2 MP79 P4 1/2X4 1/2 MPB79 26D4 1/2X4 1/2 MPB79 26D NRP4 1/2X4 1/2 MPB79 P4 1/2X4 1/2 MPB79 P NRP4 1/2x4 1/2 MPB91 32D4 1/2x 4 1/2 MPB91 32D NRPMacPro SeriesFull Mortise Heavy Weight4 1/2X4 1/2 MPB68 26D4 1/2X4 1/2 MPB68 26D NRP4 1/2X4 1/2 MPB99 32D4 1/2X4 1/2 MPB99 32D NRPNON-FERROUSFull Mortise Standard Weight,Five Knuckle4 1/2x4 1/2 TA2314 10B4 1/2x4 1/2 TA2314 26D4 1/2x4 1/2 TA2314 26D NRP4 1/2x4 1/2 TA2314 32D4 1/2x4 1/2 TA2314 32D NRPNON-FERROUSFull Mortise Heavy Weight,Five Knuckle4 1/2X4 1/2 T4A3386 32D4 1/2X4 1/2 T4A3386 32D NRP1.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

NET PRICE BOOK B-2011EFFECTIVE DATE:June 15, 2011This book supersedes and takes precedence over any PRICE BOOKprinted prior to this date.Contact McKINNEY PRODUCTS CO. for prices and availability ofnon-standard or special items not listed in this book.

FM-1FULL MORTISE HINGESSTANDARD WEIGHT THREE KNUCKLENON-FERROUS BEARINGSJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA314 3 1 ⁄2" x 3 1 ⁄2" 69313 P 51.14 3 48 3388.90 mm x 88.90 mm69314 AP 51.14 3 48 3369322 3 63.50 3 48 3369315 4 51.14 3 48 3369316 10 51.14 3 48 3369325 10A 63.50 3 48 3369317 10B 63.50 3 48 3369320 26 63.50 3 48 3369312 26D 50.74 3 48 3369323 32D 73.83 3 48 334" x 4" 69328 P 54.74 3 48 46101.60 mm x 101.60 mm69329 AP 54.74 3 48 4673709 3 61.75 3 48 4669330 4 54.74 3 48 4669331 10 54.74 3 48 4669340 10A 61.75 3 48 4669332 10B 61.75 3 48 4673714 26 61.75 3 48 4669327 26D 55.02 3 48 4669338 32D 71.97 3 48 464 1 ⁄2" x 4" 69343 P 58.93 3 48 53114.30 mm x 101.60 mm69344 AP 58.93 3 48 5369352 3 66.13 3 48 5369345 4 58.93 3 48 5369346 10 58.93 3 48 5369341 10A 66.13 3 48 5369347 10B 66.13 3 48 5369350 26 66.13 3 48 5369342 26D 58.93 3 48 5369354 32 86.01 3 48 5369353 32D 57.18 3 48 534 1 ⁄2" x 4 1 ⁄2" 69358 P 58.93 3 48 57114.30 mm x 114.30 mm69359 AP 58.93 3 48 5769367 3 66.13 3 48 5769360 4 58.93 3 48 5769361 10 58.93 3 48 5769355 10A 66.13 3 48 5769362 10B 66.13 3 48 5769365 26 66.13 3 48 5769357 26D 58.93 3 48 5769369 32 86.01 3 48 5769368 32D 58.30 3 48 574 1 ⁄2" x 4 1 ⁄2" 69370 10-NRP 62.62 3 48 57114.30 mm x 114.30 mm69371 26D-NRP 62.62 3 48 57NRP69356 32D-NRP 69.64 3 48 57Price Code 30FM-11.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-2FULL MORTISE HINGESSTANDARD WEIGHT THREE KNUCKLENON-FERROUS BEARINGSJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA314 5" x 4" 73882 P 78.20 3 24 33continued127 mm x 101.60 mm73883 AP 78.20 3 24 3373884 3 90.57 3 24 3373885 4 78.20 3 24 3373886 10 78.20 3 24 3373887 10A 90.57 3 24 3373888 10B 90.57 3 24 3373889 26 90.57 3 24 3373880 26D 78.89 3 24 3373890 32 104.69 3 24 3373881 32D 95.35 3 24 335" x 4 1 ⁄2" 69373 P 78.20 3 24 36127 mm x 114.30 mm69374 AP 78.20 3 24 3669382 3 90.57 3 24 3669375 4 78.20 3 24 3669376 10 78.20 3 24 3669385 10A 90.57 3 24 3669377 10B 90.57 3 24 3669380 26 90.57 3 24 3669372 26D 78.89 3 24 3669384 32 104.69 3 24 3669383 32D 95.35 3 24 365" x 5" 69388 P 78.20 3 24 36127 mm x 127 mm69389 AP 78.20 3 24 3669397 3 90.57 3 24 3669390 4 78.20 3 24 3669391 10 78.20 3 24 3669386 10A 90.57 3 24 3669392 10B 90.57 3 24 3669395 26 90.57 3 23 3669387 26D 78.89 3 24 3669399 32 104.69 3 24 3669398 32D 95.35 3 24 36Price Code 30FM-2

FM-3FULL MORTISE HINGESHEAVY WEIGHT THREE KNUCKLENON-FERROUS BEARINGSJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA386 4 1 ⁄2" x 4 1 ⁄2" 69403 P 84.24 3 24 37114.30 mm x 114.30 mm69404 AP 84.24 3 24 3769412 3 102.84 3 24 3769405 4 84.24 3 24 3769406 10 84.24 3 24 3769416 10A 102.84 3 24 3769407 10B 102.84 3 24 3769410 26 102.84 3 24 3769402 26D 90.57 3 24 3769414 32 133.42 3 24 3769413 32D 89.74 3 24 374 1 ⁄2" x 4 1 ⁄2" 69400 26D-NRP 94.27 3 24 37114.30 mm x 114.30 mm69415 32D-NRP 92.52 3 24 375" x 4 1 ⁄2" 69418 P 103.76 3 24 41127 mm x 114.30 mm69419 AP 107.72 3 24 4169427 3 129.05 3 24 4169420 4 107.72 3 24 4169421 10 107.72 3 24 4169431 10A 129.05 3 24 4169422 10B 129.05 3 24 4169425 26 129.05 3 24 4169417 26D 98.88 3 24 4169429 32 150.96 3 24 4169428 32D 135.75 3 24 415" x 4 1 ⁄2" 69430 26D-NRP 106.16 3 24 41127 mm x 114.30 mm74956 32D-NRP 121.02 3 24 415" x 5" 69433 P 107.72 3 24 45127 mm x 127 mm69434 AP 107.72 3 24 4569442 3 129.05 3 24 4569435 4 107.72 3 24 4569436 10 107.72 3 24 4569445 10A 129.05 3 24 4569437 10B 129.05 3 24 4569440 26 129.05 3 24 4569432 26D 102.65 3 24 4569444 32 150.96 3 24 4569443 32D 135.75 3 24 456" x 6" 69448 P 155.44 3 18 74152.4 mm x 152.4 mm69449 AP 155.44 3 18 7469457 3 194.49 3 18 7469450 4 155.44 3 18 7469451 10 155.44 3 18 7469460 10A 194.49 3 18 7469452 10B 194.49 3 18 7469455 26 194.49 3 18 7469447 26D 172.87 3 18 74Price Code 3069459 32 231.79 3 18 7469458 32D 228.48 3 18 74FM-31.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-4FULL MORTISE HINGESHOSPITAL TIP HEAVY WEIGHTTHREE KNUCKLE NON-FERROUS BEARINGSJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTHTA386 4 1 ⁄2" x 4 1 ⁄2" 69462 32D 118.17 3 24 37114.30 mm x 114.30 mmSTAINLESS STEEL INSTITUTIONAL HINGESHTA386 4 1 ⁄2" x 4 1 ⁄2" 81178 32D 134.30 3 24 37114.30 mm x 114.30 mmHTA386 x PSF 81080 32D 149.00 3 24 40Packed with 1/2 x 12-24 Torx Pin Head Security Machine ScrewHTA386 MSP SetOption A includes three hinges with hospital tips. Top and bottom hinges suppliedwith PSF and SSF, middle hinge is not416.17 setOption B - QC8 includes three hinges with hospital tips. Top and bottom hingessupplied with PSF and SSF, middle hinge is provided with QC and no PSF of SSF.Price Code 30FM-4$696.55 QC-8$725.51 CC12

FM-5FULL MORTISE HINGESSTEEL STANDARD WEIGHT THREE KNUCKLEJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT714 3 1 ⁄2" x 3 1 ⁄2" 69088 P 4.32 2 50 3288.90 mm x 88.90 mm69089 AP 6.01 2 50 3269097 3 10.88 2 50 3269090 4 6.01 2 50 3269091 10 6.01 2 50 3269086 10A 10.88 2 50 3269092 10B 10.88 2 50 3269095 26 10.88 2 50 3269087 26D 9.10 2 50 324" x 4" 69103 P 6.10 3 48 39101.60 mm x 101.60 mm69104 AP 8.07 3 48 3969112 3 11.63 3 48 3969105 4 8.07 3 48 3969106 10 8.07 3 48 3969085 10A 11.63 3 48 3969107 10B 11.63 3 48 3969110 26 11.63 3 48 3969102 26D 9.94 3 48 394 1 ⁄2" x 4" 69118 P 8.44 3 48 44114.30 mm x 101.60 mm69119 AP 10.51 3 48 4469127 3 15.77 3 48 4469120 4 10.51 3 48 4469121 10 10.51 3 48 4469100 10A 15.77 3 48 4469122 10B 15.77 3 48 4469125 26 15.77 3 48 4469117 26D 12.95 3 48 4469130 D3 10.51 3 48 4469131 D4 10.51 3 48 444 1 ⁄2" x 4" NRP 74003 26D 16.42 3 48 44Price Code 30114.30 mm x 101.60 mm4 1 ⁄2" x 4 1 ⁄2" 69133 P 8.44 3 48 48114.30 mm x 114.30 mm69134 AP 10.51 3 48 4869142 3 15.77 3 48 4869135 4 10.51 3 48 4869136 10 10.51 3 48 4869145 10A 15.77 3 48 4869137 10B 15.77 3 48 4869140 26 15.77 3 48 4869132 26D 9.68 3 48 484 1 ⁄2" x 4 1 ⁄2" NRP 74028 P-NRP 12.20 3 48 44114.30 mm x 114.30 mm74030 10B-NRP 19.24 3 48 4474029 26D-NRP 16.42 3 48 44FM-51.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-6FULL MORTISE HINGESSTEEL STANDARD WEIGHT THREE KNUCKLEJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT714 5" x 4 1 ⁄2" 69148 P 22.62 3 24 29continued127 mm x 114.30 mm69160 AP 27.39 3 24 2969157 3 37.62 3 24 2969150 4 27.39 3 24 2969151 10 27.39 3 24 2969161 10A 37.62 3 24 2969152 10B 37.62 3 24 2969155 26 37.62 3 24 2969147 26D 28.80 3 24 295" x 5" 69163 P 22.62 3 24 32127 mm x 127 mm69164 AP 27.39 3 24 3269172 3 37.62 3 24 3269165 4 27.39 3 24 3269166 10 27.39 3 24 3269175 10A 37.62 3 24 3269167 10B 37.62 3 24 3269170 26 37.62 3 24 3269162 26D 28.80 3 24 32Price Code 30FM-6

FM-7FULL MORTISE HINGESSTEEL STANDARD WEIGHTTHREE KNUCKLE BEARING✓=June 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA714 3 1 ⁄2" x 3 1 ⁄2" 69178 P 16.98 3 48 3188.90 mm x 88.90 mm69179 AP 21.12 3 48 3169187 3 24.76 3 48 3169180 4 16.98 3 48 3169181 10 18.95 3 48 3169190 10A 24.76 3 48 3169182 10B 24.76 3 48 3169185 26 24.76 3 48 3169177 26D 18.65 3 48 314" x 4" 69193 P 18.86 3 48 42101.60 mm x 101.60 mm69194 AP 22.42 3 48 4269202 3 27.39 3 48 4269195 4 18.86 3 48 4269196 10 20.17 3 48 4269191 10A 27.39 3 48 4269197 10B 27.39 3 48 4269200 26 27.39 3 48 4269192 26D 20.19 3 48 424 1 ⁄2" x 4" 69208 P 19.71 3 48 51114.30 mm x 101.60 mm69209 AP 23.46 3 48 5169217 3 29.26 3 48 5169210 4 19.71 3 48 5169211 10 19.19 3 48 5169176 10A 29.26 3 48 5169212 10B 25.40 3 48 5169215 26 25.40 3 48 5169207 26D 18.74 3 48 5169206 D3 23.46 3 48 5169221 D4 23.46 3 48 514 1 ⁄2" x 4 1 ⁄2" 69223 P 17.09 3 48 55114.30 mm x 114.30 mm69224 AP 23.46 3 48 5569232 3 25.40 3 48 5569225 4 19.71 3 48 5569226 10 15.79 3 48 5569236 10A 25.40 3 48 5569227 10B 21.89 3 48 5569230 26 21.89 3 48 5569222 26D 18.39 3 48 5569250 D3 23.46 3 48 5569146 D4 23.46 3 48 554 1 ⁄2" x 4 1 ⁄2" 69235 P-NRP 23.26 3 48 55114.30 mm x 114.30 mm74283 ✓ 26D-NRP 21.13 3 48 55(NRP) 69251 3-NRP 32.66 3 48 5574200 10-NRP 24.68 3 48 5574282 10B-NRP 32.66 3 48 55Price Code 30FM-71.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-8FULL MORTISE HINGESSTEEL STANDARD WEIGHTTHREE KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTHTA714 4 1 ⁄2" x 4 1 ⁄2" 69233 26D 36.07 3 48 55114.30 mm x 114.30 mmTA714 5" x 4 1 ⁄2" 69238 P 31.99 3 24 32127 mm x 114.30 mm69239 AP 38.27 3 24 3269247 3 51.14 3 24 3269240 4 31.99 3 24 3269241 10 34.34 3 24 3269311 10A 51.14 3 24 3269242 10B 51.14 3 24 3269245 26 51.14 3 24 3269237 26D 33.62 3 24 325" x 5" 69253 P 31.99 3 24 34127 mm x 127 mm69254 AP 38.27 3 24 3469262 3 51.23 3 24 3469255 4 31.99 3 24 3469256 10 34.34 3 24 3469326 10A 51.14 3 24 3469257 10B 51.14 3 24 3469260 26 51.14 3 24 3469252 26D 38.76 3 24 34STEEL STANDARD WEIGHT THREE KNUCKLE BEARING WIDE THROWTA714 4 1 ⁄2" x 6" 74356 P 55.55 3 24 39114.30 mm x 152.4 mm74357 AP 56.39 3 24 3974358 3 62.39 3 24 3974359 4 54.23 3 24 3974360 10 54.23 3 24 3974370 10A 62.39 3 24 3974371 10B 62.39 3 24 3974372 26 62.39 3 24 3974373 26D 59.29 3 24 3974374 D3 56.39 3 24 3974375 D4 56.39 3 24 39Price Code 30FM-8

FM-9FULL MORTISE HINGESSTEEL HEAVY WEIGHTTHREE KNUCKLE BEARINGJune 15, 2011-PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA786 4 1 ⁄2" x 4 1 ⁄2" 69268 P 53.48 3 24 37114.30 mm x 114.30 mm69269 AP 62.39 3 24 3769277 3 69.05 3 24 3769270 4 56.57 3 24 3769271 10 49.09 3 24 3775282 10A 69.05 3 24 3769272 10B 59.92 3 24 3769275 26 69.05 3 24 3769267 26D 43.65 3 24 374 1 ⁄2" x 4 1 ⁄2"-NRP 69280 P-NRP 56.39 3 24 37114.30 mm x 114.30 mm69281 10B-NRP 72.62 3 24 3775240 26D-NRP 72.62 3 24 375" x 4 1 ⁄2" 69283 P 61.74 3 24 39127 mm x 114.30 mm69284 AP 72.25 3 24 3969292 3 80.40 3 24 3969285 4 65.11 3 24 3969286 10 65.11 3 24 3975283 10A 80.40 3 24 3969287 10B 80.40 3 24 3969290 26 80.40 3 24 3969282 26D 49.82 3 24 395" x 5" 69298 P 61.74 3 24 42127 mm x 127 mm69299 AP 72.25 3 24 4269307 3 80.40 3 24 4269300 4 65.11 3 24 4269301 10 65.11 3 24 4275284 10A 80.40 3 24 4269302 10B 80.40 3 24 4269305 26 80.40 3 24 4269297 26D 57.80 3 24 426" x 6" 75311 P 114.46 3 18 62152.40 mm x 152.40 mm75312 AP 121.86 3 18 6275316 3 151.05 3 18 6275317 4 121.86 3 18 6275319 10 121.86 3 18 6275327 10A 151.05 3 18 6275320 10B 151.05 3 18 6275323 26 151.05 3 18 6275324 26D 127.87 3 18 62Price Code 30FM-91.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-10FULL MORTISE HINGESSTEEL .225 GAUGE SPECIAL HEAVYWEIGHT HINGE THREE KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTB786 8" x 6" 75349 P 303.96 3203.2 mm x 152. 4 mm75350 AP 311.28 375354 3 373.39 375355 4 311.28 375357 10 311.28 3 AS ORDERED75365 10A 373.39 375358 10B 373.39 375361 26 373.39 375362 26D 315.22 38" x 8" 75424 P 303.96 3203.2 mm x 203.2 mm75425 AP 311.28 375426 3 373.39 3Template 046A for 75427 4 311.28 31 3 ⁄4to 2 1 ⁄4" thick doors 75428 10 311.28 3 AS ORDEREDTemplate 046B for 2 1 ⁄2" 75432 10A 373.39 3or more thick doors 75429 10B 373.39 3*Specify hole pattern 75431 26 373.39 375430 26D 315.22 3STEEL HEAVY WEIGHT THREE KNUCKLE HOSPITAL TIPHTA786 4 1 ⁄2" x 4 1 ⁄2" 75242 P 72.92 3 24 35114.30 mm x 114.3075243 P x PSF 86.61 3 24 3575241 26D 67.45 3 24 3575244 26D x PSF 81.14 3 24 355" x 4 1 ⁄2" 75260 26D 74.26 3 24 35127 mm x 114.30STEEL HEAVY WEIGHT THREE KNUCKLE INSTITUTIONAL HINGEHTB786 4 1 ⁄2" x 4 1 ⁄2" 75220 P 84.72 3113.30 mm x 114.30 mm75221 P x PSF 100.29 375222 26D 96.82 375223 26D x PSF 112.39 375224 P x CC-4 wire 262.97 375225 26D x CC-4 wire 290.64 3Hinges are packed with 1 ⁄2" x 12-24 Torx Pin Head Machine Screws.Price Code 30FM-10

FM-11FULL MORTISE HINGESSTEEL SWING CLEAR HEAVY WEIGHTTHREE KNUCKLE BEARING - REVERSIBLEJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA795 4 1 ⁄2" 75468 P 147.36 3 24 57114.30 mm 75469 AP 153.51 3 24 5775470 3 187.32 3 24 5775471 4 153.51 3 24 5775472 10 153.51 3 24 5775473 10A 187.32 3 24 5775474 10B 187.32 3 24 5775475 26 187.32 3 24 5775476 26D 127.41 3 24 575" 75368 P 147.36 3 24 57127 mm 75369 AP 153.51 3 24 5775373 3 187.32 3 24 5775374 4 153.51 3 24 5775376 10 153.51 3 24 5775384 10A 187.32 3 24 5775377 10B 187.32 3 24 5775380 26 187.32 3 24 5775381 26D 121.62 3 24 57For swing clear heavy weight three knuckle bearing, beveled edge application order TA5795.(Hinges are reversible and non-handed.)Price Code 30FM-111.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-12ET-FULL MORTISE HINGESSTANDARD WEIGHT THREE KNUCKLEWITH BUTTON TIPS NON-FERROUS BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11TA314-ET 3 1 ⁄2" x 3 1 ⁄2" 70350 P 45.97 3 48 3388.90 mm x 88.90 mm70351 AP 45.97 3 48 3370352 3 57.17 3 48 3370353 4 45.97 3 48 3370354 10 45.97 3 48 3370355 10A 57.17 3 48 3370356 10B 57.17 3 48 3370357 26 57.17 3 48 3370358 26D 45.69 3 48 3370359 32D 66.42 3 48 334" x 4" 70360 P 49.29 3 48 46101.60 mm x 101.60 mm70361 AP 49.29 3 48 4670362 3 55.51 3 48 4670363 4 49.29 3 48 4670364 10 49.29 3 48 4670365 10A 55.51 3 48 4670366 10B 55.51 3 48 4670367 26 55.51 3 48 4670368 26D 49.57 3 48 4670369 32D 64.76 3 48 464 1 ⁄2" x 4" 70380 P 53.09 3 48 53114.30 mm x 101.60 mm70381 AP 53.09 3 48 5370382 3 59.50 3 48 5370383 4 53.09 3 48 5370384 10 53.09 3 48 5370385 10A 59.50 3 48 5370259 10B 59.50 3 48 5370386 26 59.50 3 48 5370387 26D 52.98 3 48 5370388 32 77.43 3 48 5370389 32D 68.86 3 48 534 1 ⁄2" x 4" 70124 3-NRP 62.82 3 48 53114.30 mm x 101.60 mm70125 10A-NRP 62.82 3 48 53(NRP) 70126 10B-NRP 62.82 3 48 5370127 26D-NRP 56.29 3 48 5370119 32D-NRP 72.17 3 48 534 1 ⁄2" x 4 1 ⁄2" 70390 P 53.09 3 48 57114.30 mm x 114.30 mm70391 AP 53.09 3 48 5770392 3 59.50 3 48 5770393 4 53.09 3 48 5770394 10 53.09 3 48 5770395 10A 59.50 3 48 5770261 10B 59.50 3 48 5770396 26 59.50 3 48 5770255 26D 52.98 3 48 5770397 32 77.43 3 48 57Price Code 3070128 32D 68.86 3 48 57FM-12

FM-13FULL MORTISE HINGESSTANDARD WEIGHT THREE KNUCKLE WITHBUTTON TIPS NON-FERROUS BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA314-ET 4 1 ⁄2" x 4 1 ⁄2" 70398 10-NRP 68.86 3 48 57114.30 mm x 114.30 mm70256 26D-NRP 56.29 3 48 57(NRP) 70129 32D-NRP 72.17 3 48 575" x 4" 70400 P 70.41 3 24 33127 mm x 101.60 mm70401 AP 70.41 3 24 3370402 3 81.52 3 24 3370403 4 70.41 3 24 3370404 10 70.41 3 24 3370405 10A 81.52 3 24 3370406 10B 81.52 3 24 3370407 26 81.52 3 24 3370408 26D 71.00 3 24 3370409 32 94.17 3 24 3370410 32D 85.81 3 24 335" x 4 1 ⁄2" 70411 P 70.41 3 24 36127 mm x 114.30 mm70412 AP 70.41 3 24 3670413 3 81.52 3 24 3670414 4 70.41 3 24 3670415 10 70.41 3 24 3670416 10A 81.52 3 24 3670417 10B 81.52 3 24 3670418 26 81.52 3 24 3670419 26D 71.00 3 24 3670420 32 94.17 3 24 3670421 32D 85.81 3 24 365" x 5" 70422 P 70.41 3 24 36127 mm x 127 mm70423 AP 70.41 3 24 3670424 3 81.52 3 24 3670425 4 70.41 3 24 3670426 10 70.41 3 24 3670427 10A 81.52 3 24 3670428 10B 81.52 3 24 3670429 26 81.52 3 24 3670430 26D 71.00 3 24 3670431 32 94.17 3 24 3670432 32D 85.81 3 24 36Price Code 30FM-131.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-14ET-FULL MORTISE HINGESHEAVY WEIGHT THREE KNUCKLE WITHBUTTON TIPS NON-FERROUS BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11TA386-ET 4 1 ⁄2" x 4 1 ⁄2" 70433 P 75.77 3 24 37114.30 mm x 114.30 mm70434 AP 75.77 3 24 3770435 3 92.52 3 24 3770436 4 75.77 3 24 3770437 10 75.77 3 24 3770438 10A 92.52 3 24 3770439 10B 92.52 3 24 3770440 26 92.52 3 24 3770139 26D 81.52 3 24 3770442 32 120.09 3 24 3770120 32D 108.00 3 24 374 1 ⁄2" x 4 1 ⁄2" 70137 26D-NRP 84.84 3 24 37114.30 mm x 114.30 mm70121 32D-NRP 111.32 3 24 37Price Code 30FM-14(NRP)5" x 4 1 ⁄2" 70443 P 96.90 3 24 41127 mm x 114.30 mm70444 AP 96.90 3 24 4170445 3 116.09 3 24 4170446 4 96.90 3 24 4170447 10 96.90 3 24 4170448 10A 116.09 3 24 4170449 10B 116.09 3 24 4170450 26 116.09 3 24 4170451 26D 92.33 3 24 4170452 32 135.86 3 24 4170453 32D 122.13 3 24 415" x 4 1 ⁄2" 70454 26D-NRP 95.54 3 24 41127 mm x 114.30 mm70455 32D-NRP 125.54 3 24 41(NRP)5" x 5" 70456 P 96.90 3 24 45127 mm x 127 mm70457 AP 96.90 3 24 4570458 3 116.09 3 24 4570459 4 96.90 3 24 4570460 10 96.90 3 24 4570461 10A 116.09 3 24 4570462 10B 116.09 3 24 4570463 26 116.09 3 24 4570464 26D 92.33 3 24 4570465 32 135.86 3 24 4570466 32D 122.13 3 24 456" x 6" 70467 P 139.85 3 18 74152.4 mm x 152.4 mm70468 AP 139.85 3 18 7470469 3 175.01 3 18 7470470 4 139.85 3 18 7470471 10 139.85 3 18 7470472 10A 175.01 3 18 7470473 10B 175.01 3 18 7470474 26 175.01 3 18 7470475 26D 155.54 3 18 7470476 32 208.61 3 18 7470122 32D 205.63 3 18 74

FM-15ET-FULL MORTISE HINGESSTANDARD WEIGHT THREE KNUCKLEWITH BUTTON TIPSJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT714-ET 3 1 ⁄2" x 3 1 ⁄2" 70300 P 3.84 2 48 3188.90 mm x 88.90 mm70301 AP 5.34 2 48 3170302 3 9.77 2 48 3170303 4 5.34 2 48 3170304 10 5.34 2 48 3170305 10A 9.77 2 48 3170306 10B 9.77 2 48 3170307 26 9.77 2 48 3170308 26D 8.17 2 48 314" x 4" 70309 P 5.44 3 48 39101.60 mm x 101.60 mm70310 AP 7.23 3 48 3970311 3 10.42 3 48 3970312 4 7.23 3 48 3970313 10 7.23 3 48 3970314 10A 10.42 3 48 3970315 10B 10.42 3 48 3970316 26 10.42 3 48 3970317 26D 8.91 3 48 394 1 ⁄2" x 4" 70477 P 7.60 3 48 44114.30 mm x 101.60 mm70478 AP 9.47 3 48 4470479 3 14.18 3 48 4470141 4 9.47 3 48 4470143 10 9.47 3 48 4470480 10A 14.18 3 48 4470103 10B 14.18 3 48 4470144 26 14.18 3 48 4470481 26D 11.63 3 48 4470482 D3 9.47 3 48 4470483 D4 9.47 3 48 444 1 ⁄2" x 4" 70142 26D-NRP 14.73 3 48 44Price Code 30114.30 mm x 101.60 mm(NRP)4 1 ⁄2" x 4 1 ⁄2" 70484 P 7.60 3 48 48114.30 mm x 114.30 mm70485 AP 9.47 3 48 4870486 3 14.18 3 48 4870487 4 9.47 3 48 4870488 10 9.47 3 48 4870489 10A 14.18 3 48 4870490 10B 14.18 3 48 4870491 26 14.18 3 48 4870337 26D 7.60 3 48 484 1 ⁄2" x 4 1 ⁄2" 70493 P-NRP 10.98 3 48 48114.30 mm x 114.30 mm70494 10B-NRP 17.27 3 48 48(NRP) 70495 26D-NRP 14.73 3 48 48FM-151.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-16ET-FULL MORTISE HINGESSTANDARD WEIGHT THREE KNUCKLEWITH BUTTON TIPSJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11T714 - ET 5" x 4 1 ⁄2" 70500 P 20.36 3 24 29127 mm x 114.30 mm70501 AP 24.68 3 24 2970502 3 33.87 3 24 2970503 4 24.68 3 24 2970504 10 24.68 3 24 2970505 10A 33.87 3 24 2970506 10B 33.87 3 24 2970507 26 33.87 3 24 2970508 26D 25.89 3 24 295" x 5" 70509 P 20.36 3 24 32127 mm x 127 mm70510 AP 24.68 3 24 3270511 3 33.87 3 24 3270512 4 24.68 3 24 3270513 10 24.68 3 24 3270514 10A 33.87 3 24 3270515 10B 33.87 3 24 3270516 26 33.87 3 24 3270517 26D 25.89 3 24 32Price Code 30FM-16

FM-17ET-FULL MORTISE HINGESSTEEL STANDARD THREE KNUCKLEBEARING WITH BUTTON TIPSJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA714-ET 3 1 ⁄2" x 3 1 ⁄2" 70318 P 15.29 3 48 3188.90 mm x 88.90 mm70319 AP 19.05 3 48 3170320 3 22.24 3 48 3170321 4 15.29 3 48 3170322 10 16.98 3 48 3170323 10A 22.24 3 48 3170324 10B 22.24 3 48 3170325 26 22.24 3 48 3170326 26D 19.32 3 48 314" x 4" 70327 P 16.98 3 48 42101.60 mm x 101.60 mm70328 AP 20.17 3 48 4270329 3 24.68 3 48 4270330 4 16.98 3 48 4270331 10 18.11 3 48 4270332 10A 24.68 3 48 4270333 10B 24.68 3 48 4270334 26 24.68 3 48 4270335 26D 20.93 3 48 424 1 ⁄2" x 4" 70963 P 17.73 3 48 51114.30 mm x 101.60 mm70964 AP 21.12 3 48 5170108 3 26.37 3 48 5170965 4 17.73 3 48 5170966 10 18.95 3 48 5170520 10A 26.37 3 48 5170107 10B 26.37 3 48 5170106 26 29.26 3 48 5170109 26D 19.72 3 48 5170967 D3 21.12 3 48 5170968 D4 21.12 3 48 514 1 ⁄2" x 4" 70529 P-NRP 20.93 3 48 51114.30 mm x 101.60 mm70530 3-NRP 29.36 3 48 51(NRP) 70531 10-NRP 22.14 3 48 5170532 10B-NRP 29.36 3 48 5170110 26D-NRP 25.33 3 48 514 1 ⁄2" x 4 1 ⁄2" 70521 P 17.73 3 48 55114.30 mm x 114.30 mm70522 AP 21.12 3 48 5570523 3 26.37 3 48 5570524 4 17.73 3 48 5570113 10 18.95 3 48 5570525 10A 26.37 3 48 5570111 10B 26.37 3 48 5570526 26 26.37 3 48 5570340 26D 16.50 3 48 5570527 D3 21.12 3 48 5570528 D4 21.12 3 48 55Price Code 30FM-171.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-18ET-FULL MORTISE HINGESSTEEL STANDARD WEIGHT THREE KNUCKLEBEARING WITH BUTTON TIPSJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11TA714-ET 4 1 ⁄2"x4 1 ⁄2" 70533 P-NRP 20.93 3 48 55114.30mmx114.30mm70534 3-NRP 29.36 3 48 55(NRP) 70114 10-NRP 22.14 3 48 5570535 10B-NRP 29.36 3 48 5570146 26D-NRP 18.94 3 48 555"x4 1 ⁄2" 70536 P 28.80 3 24 32127mmx114.30mm70537 AP 34.43 3 24 3270538 3 45.97 3 24 3270539 4 28.80 3 24 3270540 10 30.87 3 24 3270541 10A 45.97 3 24 3270542 10B 45.97 3 24 3270543 26 45.97 3 24 3270145 26D 34.81 3 24 325"x5" 70544 P 28.72 3 24 34127mmx127mm70545 AP 34.43 3 24 3470546 3 45.97 3 24 3470547 4 28.72 3 24 3470548 10 30.87 3 24 3470549 10A 51.14 3 24 3470550 10B 51.14 3 24 3470551 26 51.14 3 24 3470552 26D 34.81 3 24 34Price Code 30FM-18STEEL STANDARD WEIGHT THREE KNUCKLE BEARING WIDE THROW WITH BUTTON TIPS4 1 ⁄2x6 70670 P 49.91 3 24 39114.30mmx152.4mm70671 AP 50.75 3 24 3970672 3 56.10 3 24 3970673 4 48.78 3 24 3970674 10 48.78 3 24 3970675 10A 56.10 3 24 3970676 10B 56.10 3 24 3970677 26 56.10 3 24 3970678 26D 53.38 3 24 3970679 D3 50.75 3 24 3970680 D4 50.75 3 24 39

FM-19ET-FULL MORTISE HINGESSTEEL HEAVY WEIGHT THREE KNUCKLEBEARING WITH BUTTON TIPSJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA786-ET 4 1 ⁄2" x 4 1 ⁄2" 70681 P 48.13 3 24 37114.30 mm x 114.30 mm70682 AP 56.10 3 24 3770116 3 62.11 3 24 3770123 4 50.84 3 24 3770683 10 50.84 3 24 3770684 10A 62.11 3 24 3770685 10B 62.11 3 24 3770686 26 62.11 3 24 3770117 26D 46.08 3 24 374 1 ⁄2"x4 1 ⁄2" 70687 P-NRP 50.75 3 24 37114.30mmx114.30mm70688 10B-NRP 65.29 3 24 37(NRP) 70118 26D-NRP 48.28 3 24 375"x4 1 ⁄2" 70723 P 55.55 3 24 39127mmx114.30mm70724 AP 65.02 3 24 3970725 3 72.33 3 24 3970726 4 58.55 3 24 3970727 10 58.55 3 24 3970728 10A 72.33 3 24 3970729 10B 72.33 3 24 3970730 26 72.33 3 24 3970148 26D 52.68 3 24 395"x4 1 ⁄2" 70149 26D-NRP 63.42 3 24 39Price Code 30127mmx114.30mm(NRP)5"x5" 70731 P 55.55 3 24 42127mmx127mm70732 AP 65.02 3 24 4270733 3 72.33 3 24 4270734 4 58.55 3 24 4270735 10 58.55 3 24 4270736 10A 72.33 3 24 4270737 10B 72.33 3 24 4270738 26 72.33 3 24 4270739 26D 59.96 3 24 426"x6" 70740 P 103.02 3 18 62152.4mmx152.4mm70741 AP 109.67 3 18 6270742 3 135.94 3 18 6270743 4 109.67 3 18 6270744 10 109.67 3 18 6270745 10A 135.94 3 18 6270746 10B 135.94 3 18 6270767 26 135.94 3 18 6270768 26D 115.10 3 18 62FM-191.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-20ET-FULL MORTISE HINGESSTEEL SWING CLEAR HEAVY WEIGHTTHREE KNUCKLEREVERSIBLE BEARING WITH BUTTON TIPSJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11TA795-ET 4 1 ⁄2" 70919 P 132.56 3 24 57114.30mm70928 AP 138.11 3 24 5770929 3 168.51 3 24 5770932 4 138.11 3 24 5770933 10 138.11 3 24 5770934 10A 168.51 3 24 5770935 10B 168.51 3 24 5770936 26 168.51 3 24 5770937 26D 126.08 3 24 575" 70938 P 132.56 3 24 42127mm70939 AP 138.11 3 24 4270942 3 168.51 3 24 4270943 4 138.11 3 24 4270944 10 138.11 3 24 4270945 10A 168.51 3 24 4270946 10B 168.51 3 24 4270947 26 168.51 3 24 4270948 26D 126.08 3 24 42For swing clear heavy weight three knuckle hinges with button tips for beveled edge doors specify TA5795 ET(Hinges are reversible and non-handed)Price Code 30FM-20

FM-21FULL MORTISE HINGESNON-FERROUS STANDARD WEIGHTFIVE KNUCKLEJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT2314 3 1 ⁄2" x 3 1 ⁄2" 58822 P 28.74 2 48 3588.90 mm x 88.90 mm59597 3 32.34 2 48 3558823 4 28.74 2 48 3559596 10 28.74 2 48 3558839 10A 32.34 2 48 3558836 10B 27.87 2 48 3558826 26 32.34 2 48 3559595 26D 28.54 2 48 3558844 32 39.93 2 48 3558845 32D 27.03 2 48 354" x 4" 59645 P 31.36 3 48 44101.60 mm x 101.60 mm59651 3 27.85 3 48 4459647 4 31.36 3 48 4459653 10 31.36 3 48 4459665 10A 36.52 3 48 4459646 10B 27.32 3 48 4459655 26 36.52 3 48 4459657 26D 31.95 3 48 4459662 32 45.38 3 48 4459661 32D 30.96 3 48 444 1 ⁄2" x 4" 59736 P 29.42 3 48 47114.30 mm x 101.60 mm58919 3 39.25 3 48 4758920 4 32.82 3 48 4759730 10 32.82 3 48 4759740 10A 39.25 3 48 4759733 10B 39.25 3 48 4758924 26 39.25 3 48 4759732 26D 34.39 3 48 4758875 32 48.78 3 48 4758876 32D 37.17 3 48 474 1 ⁄2" x 4 1 ⁄2" 59785 P 29.42 3 48 52114.30 mm x 114.30 mm59791 3 39.25 3 48 5259787 4 32.82 3 48 5259789 9 43.84 3 48 5259793 10 29.42 3 48 5259803 10A 39.25 3 48 5258972 10B 29.36 3 48 5259795 26 34.06 3 48 5259797 26D 30.22 3 48 5258963 32 48.78 3 48 5258964 32D 33.15 3 48 524 1 ⁄2" x 4 1 ⁄2" 59804 10B-NRP 37.34 3 48 52114.30 mm x 114.30 mm59784 26D-NRP 33.72 3 48 52(NRP) 58965 32D-NRP 35.91 3 48 525" x 4 1 ⁄2" 58989 P 44.12 3 24 33Price Code 50127 mm x 114.30 mm58990 3 55.31 3 24 3358991 4 44.12 3 24 3359880 10 44.12 3 24 33FM-211.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-22FULL MORTISE HINGESNON-FERROUS STANDARD WEIGHTFIVE KNUCKLEJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT2314 5" x 4 1 ⁄2" 58998 10A 55.31 3 24 33continued127 mm x 114.30 mm59879 10B 53.29 3 24 3358995 26 55.31 3 24 3359882 26D 48.89 3 24 3359006 32 66.72 3 24 3359007 32D 61.35 3 24 335" x 5" 59948 P 44.12 3 24 35127 mm x 127 mm59941 3 55.31 3 24 3559944 4 44.12 3 24 3559943 10 44.12 3 24 3559947 10A 55.31 3 24 3559946 10B 55.31 3 24 3559945 26 55.31 3 24 3559940 26D 48.89 3 24 3559191 32 66.72 3 24 3559192 32D 61.35 3 24 35Price Code 50FM-22

FM-23FULL MORTISE HINGESNON-FERROUS STANDARD WEIGHTFIVE KNUCKLE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA2314 3 1 ⁄2" x 3 1 ⁄2" 61020 P 33.88 3 48 3388.90 mm x 88.90 mm61021 3 43.16 3 48 3361022 4 33.88 3 48 3361014 10 33.88 3 48 3361016 10A 43.16 3 48 3361015 10B 43.16 3 48 3359611 26 43.16 3 48 3359630 26D 34.77 3 48 3361019 32 34.77 3 48 3361026 32D 50.65 3 48 334" x 4" 59675 P 36.72 3 48 46101.60 mm x 101.60 mm59681 3 42.65 3 48 4659677 4 36.72 3 48 4659683 10 36.72 3 48 4659682 10A 42.65 3 48 4659680 10B 32.53 3 48 4659685 26 42.65 3 48 4659687 26D 38.18 3 48 4659676 32 54.63 3 48 4659678 32D 37.65 3 48 464 1 ⁄2" x 4" 59750 P 35.35 3 48 53114.30 mm x 101.60 mm59754 3 52.40 3 48 5359759 4 39.53 3 48 5359745 10 39.53 3 48 5359753 10A 52.40 3 48 5359746 10B 52.40 3 48 5359757 26 52.40 3 48 5359747 26D 41.88 3 48 5359751 32 59.60 3 48 5359752 32D 40.57 3 48 534 1 ⁄2" x 4" 59755 26D-NRP 34.09 3 48 53114.30 mm x 101.60 mm59756 32D-NRP 43.27 3 48 53(NRP)4 1 ⁄2" x 4 1 ⁄2" 59820 P 35.35 3 48 57114.30 mm x 114.30 mm59826 3 35.04 3 48 5759822 4 26.95 3 48 5759824 9 51.62 3 48 5759828 10 29.65 3 48 5759829 10A 46.85 3 48 5759839 10B 35.04 3 48 5759830 26 46.85 3 48 5759832 26D 28.74 3 48 5759823 32 44.58 3 48 5759838 32D 40.57 3 48 574 1 ⁄2" x 4 1 ⁄2" 59821 P-NRP 29.21 3 48 57Price Code 50114.30 mm x 114.30 mm59844 3-NRP 37.74 3 48 57(NRP) 59835 10-NRP 30.00 3 48 5776001 10B-NRP 37.74 3 48 57FM-231.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-24FULL MORTISE HINGESNON-FERROUS STANDARD WEIGHTFIVE KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA2314 4 1 ⁄2" x 4 1 ⁄2" 59837 ✓ 26D-NRP 34.09 3 48 57continued114.30 mm x 114.30 mm59840 ✓ 32D-NRP 43.27 3 48 575" x 4" 59989 P 50.16 3 24 33127 mm x 101.60 mm59991 3 63.60 3 24 3359992 4 50.16 3 24 3359993 10 50.16 3 24 3359994 10A 63.60 3 24 3359995 10B 63.60 3 24 3359996 26 63.60 3 24 3359997 26D 56.97 3 24 3359998 32 71.79 3 24 3359999 32D 66.42 3 24 335" x 4 1 ⁄2" 60013 P 50.16 3 24 36127 mm x 114.30 mm60014 3 63.60 3 24 3660015 4 50.16 3 24 3659900 10 50.16 3 24 3659907 10A 63.60 3 24 3659906 10B 55.19 3 24 3660019 26 63.60 3 24 3659902 26D 56.97 3 24 3659901 32 71.79 3 24 3659904 32D 49.68 3 24 365" x 4 1 ⁄2" 59905 26D-NRP 54.63 3 24 36127 mm x 114.30 mm59910 32D-NRP 52.37 3 24 36(NRP)5" x 5" 59965 P 50.16 3 24 38127 mm x 127 mm59971 3 63.60 3 24 3859967 4 50.16 3 24 3859973 10 50.16 3 24 3859972 10A 63.60 3 24 3859966 10B 55.19 3 24 3859975 26 63.60 3 24 3859977 26D 56.97 3 24 3859983 32 79.96 3 24 3859984 32D 74.60 3 24 386" x 6" 61172 P 83.57 3 18 43152.40 mm x 152.40 mm61173 3 106.45 3 18 4361174 4 83.57 3 18 4361167 10 83.57 3 18 4361171 10A 106.45 3 18 4361168 10B 106.45 3 18 4361178 26 106.45 3 18 4361179 26D 95.63 3 18 43Price Code 50FM-24

FM-25FULL MORTISE HINGESNON-FERROUS STANDARD WEIGHTFIVE KNUCKLE CONCEALED BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTCA2314 4 1 ⁄2" x 4 1 ⁄2" 68970 P 38.87 3 48 57114.30 mm x 114.30 mm68978 3 51.52 3 48 5768972 4 38.87 3 48 5768973 10 38.87 3 48 5768969 10A 51.52 3 48 5768974 10B 51.52 3 48 5768981 26 51.52 3 48 5768976 26D 46.07 3 48 5768982 32 59.60 3 48 5768983 32D 59.60 3 48 575" x 5" 68990 P 54.94 3 24 38127 mm x 127 mm68998 3 62.43 3 24 3868992 4 54.94 3 24 3868993 10 54.93 3 24 3868989 10A 69.15 3 24 3868994 10B 69.15 3 24 3869001 26 69.15 3 24 3868996 26D 62.52 3 24 3869002 32 87.45 3 24 3869003 32D 82.10 3 24 38NON-FERROUS STANDARD WEIGHT FIVE KNUCKLE BALL TIPTA2314BT 4 1 ⁄2" x 4 1 ⁄2" 59818 3 71.19 3 48 59114.30 mm x 114.30 mmNON-FERROUS STANDARD WEIGHT FIVE KNUCKLE STEEPLE TIPTA2314ST 4 1 ⁄2" x 4 1 ⁄2" 59816 3 71.19 3 48 59114.30 mm x 114.30 mmNON-FERROUS SWING CLEAR STANDARD WEIGHTTA2395 4 1 ⁄2" 56985 32D 179.50 3 24 40114.30 mmHinges are NRP and Reversible.NON-FERROUS STANDARD WEIGHT FIVE KNUCKLE WIDE THROWTA2398 4 1 ⁄2" x 6" 62624 32D 144.44 3 48 42Price Code 50114.30 mm x 152.40 mmFM-251.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-26FULL MORTISE HINGESSTEEL STANDARD WEIGHT FIVE KNUCKLE✓=June 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHT2714 3 1 ⁄2" x 3 1 ⁄2" 55315 P 2.74 2 48 3188.90 mm x 88.90 mm55335 AP 5.17 2 48 3155317 3 6.95 2 48 3155337 4 2.74 2 48 3155321 10 3.85 2 48 3155330 10A 9.28 2 48 3155333 ✓ 10B 6.95 2 48 3155314 15 6.93 2 48 3155327 26 6.95 2 48 3155319 ✓ 26D 5.96 2 48 314" x 4" 55485 P 4.00 3 48 41101.60 mm x 101.60 mm55505 AP 7.04 3 48 4155491 3 7.51 3 48 4155487 4 4.00 3 48 4155493 10 7.04 3 48 4155511 10A 10.04 3 48 4155496 ✓ 10B 7.51 3 48 4155497 15 6.38 3 48 4155499 26 7.51 3 48 4155501 ✓ 26D 6.38 3 48 414 1 ⁄2" x 4" 55635 P 5.54 3 48 50114.30 mm x 101.60 mm55641 AP 9.85 3 48 5055646 3 10.16 3 48 5055648 4 6.44 3 48 5055637 10 8.74 3 48 5055638 10A 13.32 3 48 5055644 10B 10.16 3 48 5055656 15 9.69 3 48 5055655 26 10.16 3 48 5055639 ✓ 26D 8.35 3 48 5055652 D3 8.55 3 48 5055653 D4 9.85 3 48 504 1 ⁄2" x 4" 55645 P-NRP 10.98 3 48 50114.30 mm x 101.60 mm55657 26D-NRP 14.73 3 48 50(NRP)4 1 ⁄2" x 4 1 ⁄2" 55745 ✓ P 5.54 3 48 54114.30 mm x 114.30 mm55759 AP 9.85 3 48 5455771 ✓ 3 10.04 3 48 5455767 ✓ 4 5.54 3 48 5455769 9 14.73 3 48 5455774 ✓ 10 6.53 3 48 5455762 10A 10.04 3 48 5455742 10B 10.04 3 48 5455751 15 8.36 3 48 5455753 26 10.04 3 48 5455755 ✓ 26D 7.95 3 48 54Price Code 5055782 D3 9.85 3 48 5455783 D4 7.37 3 48 54FM-26PRICE BOX CASE CASEEACH QTY. QTY. WEIGHT

FM-27FULL MORTISE HINGESSTEEL STANDARD WEIGHT FIVE KNUCKLE✓=June 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT2714 4 1 ⁄2" x 4 1 ⁄2" 55747 ✓ P-NRP 8.21 3 48 54continued114.30 mm x 114.30 mm55754 AP-NRP 12.11 3 48 54(NRP) 55750 3-NRP 16.98 3 48 5455768 4-NRP 10.98 3 48 5455792 10-NRP 12.20 3 48 5455752 10B-NRP 16.88 3 48 5455766 26-NRP 16.88 3 48 5455778 ✓ 26D-NRP 10.49 3 48 545" x 4 1 ⁄2" 55968 P 19.89 3 24 31127 mm x 114.30 mm55974 AP 23.65 3 24 3155988 3 32.75 3 24 3170044 4 23.65 3 24 3155970 10 23.65 3 24 3155971 10A 32.75 3 24 3170046 10B 32.75 3 24 3155984 15 24.59 3 24 3170049 26 32.75 3 24 3155972 26D 18.39 3 24 3155973 D3 23.65 3 24 3155982 D4 23.65 3 24 315" x 5" 56080 P 19.89 3 24 34127 mm x 127 mm56090 AP 23.65 3 24 3456082 3 32.75 3 24 3470057 4 23.65 3 24 3456086 10 23.65 3 24 3470064 10A 32.75 3 24 3470059 10B 32.75 3 24 3456087 15 24.59 3 24 3470062 26 32.75 3 24 3456084 26D 24.58 3 24 3470065 D3 23.65 3 24 3470066 D4 23.65 3 24 346" x 6" 56225 P 38.93 3 24 57152.4 mm x 152.4 mm56215 AP 41.37 3 24 5756220 3 54.32 3 24 5756229 4 41.37 3 24 5756226 10 41.37 3 24 5756231 10A 54.32 3 24 5756222 10B 54.32 3 24 5756214 26 54.32 3 24 5756228 26D 48.88 3 24 5756219 D3 41.37 3 24 5756216 D4 40.15 3 24 57Price Code 50FM-271.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-28FULL MORTISE HINGESSTEEL STANDARD WEIGHTFIVE KNUCKLE BEARING✓=June 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA2714 3 1 ⁄2" x 3 1 ⁄2" 55385 P 10.04 3 48 3188.90 mm x 88.90 mm55399 AP 16.98 3 48 3155391 3 15.02 3 48 3155387 4 13.42 3 48 3155395 10 15.29 3 48 3155401 10A 22.71 3 48 3155389 10B 16.98 3 48 3155392 15 17.64 3 48 3155402 26 22.71 3 48 3155393 26D 13.19 3 48 314" x 4" 55555 ✓ P 11.30 3 48 42101.60 mm x 101.60 mm55575 AP 18.39 3 48 4255561 3 16.35 3 48 4255557 4 15.11 3 48 4255563 10 14.33 3 48 4255554 10A 21.86 3 48 4255577 10B 16.35 3 48 4255567 15 24.01 3 48 4255569 26 21.86 3 48 4255571 26D 13.97 3 48 424 1 ⁄2" x 4" 55675 P 12.42 3 48 51114.30 mm x 101.60 mm55677 AP 18.86 3 48 5155683 3 18.04 3 48 5155674 4 12.66 3 48 5155681 10 13.45 3 48 5155673 10A 24.12 3 48 5155691 10B 18.04 3 48 5155616 15 17.84 3 48 5155688 26 18.04 3 48 5155679 ✓ 26D 15.37 3 48 5155587 D3 18.86 3 48 5155588 D4 18.86 3 48 514 1 ⁄2" x 4" 55693 P-NRP 17.30 3 48 51114.30 mm x 101.60 mm55690 26D-NRP 18.04 3 48 51(NRP) 55682 10A-NRP 27.68 3 48 5155689 10B-NRP 27.68 3 48 514 1 ⁄2" x 4 1 ⁄2" 55820 ✓ P 12.42 3 48 55114.30 mm x 114.30 mm55866 AP 18.86 3 48 5555846 ✓ 3 18.04 3 48 5555842 ✓ 4 12.42 3 48 5555844 9 26.46 3 48 5555848 ✓ 10 13.19 3 48 5555847 ✓ 10A 18.04 3 48 5555862 ✓ 10B 18.04 3 48 5555854 15 15.37 3 48 5555856 ✓ 26 18.04 3 48 55Price Code 5055858 ✓ 26D 14.64 3 48 5555809 D3 18.86 3 48 5555810 D4 14.10 3 48 55FM-28

FM-29FULL MORTISE HINGESSTEEL STANDARD WEIGHTFIVE KNUCKLE BEARING✓=June 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA2714 4 1 ⁄2" x 4 1 ⁄2" 55822 ✓ P-NRP 15.02 3 48 55continued114.30 mm x 114.30 mm55868 AP-NRP 22.42 3 48 55(NRP) 55853 ✓ 3-NRP 20.71 3 48 5555834 ✓ 4-NRP 15.02 3 48 5555816 9-NRP 30.30 3 48 5555850 ✓ 10-NRP 15.86 3 48 5555851 10A-NRP 27.68 3 48 5555875 ✓ 10B-NRP 20.71 3 48 5555870 26-NRP 20.71 3 48 5555860 ✓ 26D-NRP 17.18 3 48 5555814 D3-NRP 22.42 3 48 5555812 D4-NRP 22.42 3 48 555" x 4" 55963 P 26.74 3 24 29127 mm x 101.60 mm55995 AP 31.25 3 24 2955996 3 36.69 3 24 2955997 4 26.74 3 24 2955964 10 27.95 3 24 2955966 26 36.69 3 24 2955962 26D 27.28 3 24 295" x 4 1 ⁄2" 56010 P 26.74 3 24 32127 mm x 114.30 mm56024 AP 31.25 3 24 3256011 3 36.77 3 24 3256013 4 26.74 3 24 3256014 10 24.26 3 24 3256036 10A 33.43 3 24 3256026 10B 31.91 3 24 3256021 15 28.57 3 24 3256018 26 36.77 3 24 3256020 26D 23.51 3 24 325" x 4 1 ⁄2" 56012 P-NRP 30.30 3 24 32114.30 mm x 101.60 mm56030 26D-NRP 26.18 3 24 32Price Code 50(NRP)5" x 5" 56120 P 26.74 3 24 34127 mm x 127 mm56122 P-NRP 30.22 3 24 3456153 AP 31.25 3 24 3456139 3 36.77 3 24 3456135 4 26.74 3 24 3456141 10 37.34 3 24 3456148 10A 36.77 3 24 3456155 10B 31.91 3 24 3456145 15 31.43 .3 24 3456147 26 36.77 3 24 3456149 26D 36.77 3 24 346" x 6" 56232 P 56.01 3 18 55152.4 mm x 152.4 mm56249 AP 58.64 3 18 5556239 3 76.09 3 18 5556240 4 56.01 3 18 5556243 10 58.64 3 18 5556252 10A 76.09 3 18 5556244 10B 76.09 3 18 5556247 26 76.09 3 18 5556248 26D 65.21 3 18 55FM-291.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-30FULL MORTISE HINGESSTEEL STANDARD WEIGHTFIVE KNUCKLE CONCEALED BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTCA2714 4 1 ⁄2" x 4" 67200 P 18.21 3 48 51114.30 mm x 101.60 mm67201 AP 20.82 3 48 5167208 3 26.55 3 48 5167202 4 18.21 3 48 5167203 10 19.43 3 48 5167216 10A 26.55 3 48 5167204 10B 26.55 3 48 5167210 15 22.61 3 48 5167211 26 26.55 3 48 5167206 26D 19.62 3 48 5167213 D3 20.82 3 48 5167214 D4 20.82 3 48 514 1 ⁄2" x 4 1 ⁄2" 67220 P 18.21 3 48 55114.30 mm x 114.30 mm67221 AP 20.82 3 48 5567228 3 26.55 3 48 5567222 4 18.21 3 48 5567223 10 19.43 3 48 5567235 10A 26.55 3 48 5567224 10B 26.55 3 48 5567230 15 22.61 3 48 5567231 26 26.55 3 48 5567226 26D 19.62 3 48 5567233 D3 20.82 3 48 5567234 D4 20.82 3 48 555" x 4 1 ⁄2" 67240 P 29.36 3 24 32127 mm x 114.30 mm67241 AP 34.43 3 24 3267248 3 40.34 3 24 3267242 4 29.26 3 24 3267243 10 30.77 3 24 3267255 10A 40.34 3 24 3267244 10B 40.34 3 24 3267245 15 34.62 3 24 3267251 26 40.34 3 24 3267246 26D 34.62 3 24 3267253 D3 34.43 3 24 3267254 D4 34.43 3 24 325" x 5" 67260 P 29.36 3 24 32127 mm x 127 mm67261 AP 29.36 3 24 3267268 3 40.34 3 24 3267262 4 29.26 3 24 3267263 10 30.77 3 24 3267275 10A 40.34 3 24 3267264 10B 40.34 3 24 3267265 15 34.62 3 24 3267271 26 40.34 3 24 3267266 26D 34.62 3 24 32Price Code 5067273 D3 34.43 3 24 3267274 D4 34.43 3 24 32FM-30

FM-31FULL MORTISE HINGESSTEEL STANDARD WEIGHT FIVE KNUCKLEHOSPITAL TIP BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTHTA2714 4 1 ⁄2" x 4 1 ⁄2" 55821 P 33.12 3 48 55Price Code 50114.30 mm x 114.30 mm55859 26D 28.67 3 48 55STEEL STANDARD WEIGHT TWO KNUCKLET2731 3 1 ⁄2" x 3 1 ⁄2"88.90 mm x 88.90 mmR.H. 66800 P 5.15 3 100 61L.H. 66801 P 5.15 3 100 61R.H. 66812 AP 7.09 3 100 61L.H. 66813 AP 7.09 3 100 61R.H. 66798 3 12.84 3 100 61L.H. 66799 3 12.84 3 100 61R.H. 66784 4 7.09 3 100 61L.H. 66785 4 7.09 3 100 61R.H. 66804 10 7.09 3 100 61L.H. 66805 10 7.09 3 100 61R.H. 66814 10A 12.84 3 100 61L.H. 66815 10A 12.84 3 100 61R.H. 66816 10B 12.84 3 100 61L.H. 66817 10B 12.84 3 100 61R.H. 66821 26 12.84 3 100 61L.H. 66822 26 12.84 3 100 61R.H. 66808 26D 10.99 3 100 61L.H. 66809 26D 10.99 3 100 61R.H. 66827 D3 7.09 3 100 61L.H. 66828 D3 7.09 3 100 61R.H. 66831 D4 7.09 3 100 61L.H. 66832 D4 7.09 3 100 614" x 4"101.60 mm x 101.60 mmR.H. 66839 P 9.56 3 48 40L.H. 66840 P 9.56 3 48 40R.H. 66851 AP 10.89 3 48 40L.H. 66852 AP 10.89 3 48 40R.H. 70158 3 16.96 3 48 40L.H. 70159 3 16.96 3 48 40R.H. 70160 4 10.89 3 48 40L.H. 70161 4 10.89 3 48 40R.H. 66843 10 10.89 3 48 40L.H. 66844 10 10.89 3 48 40R.H. 66845 10A 16.96 3 48 40L.H. 66846 10A 16.96 3 48 40R.H. 66855 10B 16.96 3 48 40L.H. 66856 10B 16.96 3 48 40R.H. 70170 26 16.96 3 48 40T2731 L.H. 70171 26 16.96 3 48 40continued R.H. 66847 26D 13.98 3 48 40Price Code 20FM-311.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-32FULL MORTISE HINGESSTEEL STANDARD WEIGHT TWO KNUCKLEJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT2731 L.H. 66848 26D 13.98 3 48 40continued R.H. 70176 D3 10.58 3 48 40L.H. 70177 D3 10.58 3 48 40R.H. 70178 D4 10.58 3 48 40L.H. 70179 D4 10.58 3 48 404 1 ⁄2" x 4"Price Code 20FM-32114.30 mm x 101.60 mmR.H. 66881 P 9.56 3 48 45L.H. 66882 P 9.56 3 48 45R.H. 66891 AP 11.10 3 48 45L.H. 66892 AP 11.10 3 48 45R.H. 66879 3 17.67 3 48 45L.H. 66880 3 17.67 3 48 45R.H. 66887 4 11.10 3 48 45L.H. 66888 4 11.10 3 48 45R.H. 66883 10 11.10 3 48 45L.H. 66884 10 11.10 3 48 45R.H. 66869 10A 17.67 3 48 45L.H. 66870 10A 17.67 3 48 45R.H. 66893 10B 17.67 3 48 45L.H. 66894 10B 17.67 3 48 45R.H. 66886 26 15.33 3 48 45L.H. 66885 26 15.34 3 48 45R.H. 66925 26D 12.66 3 48 45L.H. 66926 26D 12.66 3 48 45R.H. 66867 D3 9.63 3 48 45L.H. 66868 D3 9.63 3 48 45R.H. 66873 D4 9.63 3 48 45L.H. 66874 D4 9.63 3 48 454 1 ⁄2" x 4 1 ⁄2"114.30 mm x 114.30 mmR.H. 66895 P 9.56 3 48 48L.H. 66896 P 9.56 3 48 48R.H. 66910 AP 11.10 3 48 48L.H. 66909 AP 11.10 3 48 48R.H. 66937 3 17.67 3 48 48L.H. 66938 3 17.67 3 48 48R.H. 70235 4 11.10 3 48 48L.H. 70236 4 11.10 3 48 48R.H. 66899 10 11.10 3 48 48L.H. 66900 10 11.10 3 48 48R.H. 66901 10A 17.67 3 48 48L.H. 66902 10A 17.67 3 48 48R.H. 65739 10B 17.67 3 48 48L.H. 65740 10B 17.67 3 48 48R.H. 66905 26 17.67 3 48 48L.H. 66906 26 17.67 3 48 48R.H. 66903 26D 12.66 3 48 48

FM-33FULL MORTISE HINGESSTEEL STANDARD WEIGHT TWO KNUCKLEJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT2731 4 1 ⁄2" x 4 1 ⁄2"continued L.H. 66904 26D 12.66 3 48 48R.H. 70234 D3 11.10 3 48 48L.H. 70233 D3 11.10 3 48 48R.H. 70249 D4 11.10 3 48 48L.H. 70250 D4 11.10 3 48 48TA2731 3 1 ⁄2" x 3 1 ⁄2"Price Code 2088.90 mm x 88.90 mmR.H. 65450 P 20.65 3 48 31L.H. 65451 P 20.65 3 48 31R.H. 65463 AP 23.12 3 48 31L.H. 65464 AP 23.12 3 48 31R.H. 65477 3 31.86 3 48 31L.H. 65478 3 31.86 3 48 31R.H. 65452 4 23.12 3 48 31L.H. 65453 4 23.12 3 48 31R.H. 65454 10 23.12 3 48 31L.H. 65455 10 23.12 3 48 31R.H. 65467 10A 31.86 3 48 31L.H. 65468 10A 31.86 3 48 31R.H. 65475 10B 29.09 3 48 31L.H. 65476 10B 29.09 3 48 31R.H. 65483 26 31.86 3 48 31L.H. 65484 26 31.86 3 48 31R.H. 65458 26D 23.64 3 48 31L.H. 65459 26D 23.64 3 48 31R.H. 65487 D3 23.12 3 48 31L.H. 65488 D3 23.12 3 48 31R.H. 65489 D4 23.12 3 48 31L.H. 65490 D4 23.12 3 48 314" x 4"101.60 mm x 101.60 mmR.H. 65513 P 21.68 3 48 39L.H. 65514 P 21.68 3 48 39R.H. 65519 AP 23.33 3 48 39L.H. 65520 AP 23.33 3 48 39R.H. 65539 3 31.75 3 48 39L.H. 65546 3 31.75 3 48 394" x 4"101.60 mm x 101.60 mmR.H. 65515 4 23.33 3 48 39L.H. 65516 4 23.33 3 48 39R.H. 65525 10 23.33 3 48 39L.H. 65526 10 23.33 3 48 39R.H. 65544 10A 31.75 3 48 39L.H. 65545 10A 31.75 3 48 39R.H. 65543 10B 31.75 3 48 39FM-331.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-34FULL MORTISE HINGESSTEEL STANDARD WEIGHTTWO KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA2731 L.H. 65542 10B 31.75 3 48 39continued R.H. 65541 26 31.75 3 48 39L.H. 65540 26 31.75 3 48 39R.H. 65531 26D 27.03 3 48 39L.H. 65532 26D 27.03 3 48 39R.H. 65535 D3 23.33 3 48 39L.H. 65536 D3 23.33 3 48 39R.H. 65537 D4 23.33 3 48 39L.H. 65538 D4 23.33 3 48 394 1 ⁄2" x 4"FM-34114.30 mm x 101.60 mmR.H. 65561 P 21.99 3 48 46L.H. 65562 P 21.99 3 48 46R.H. 65567 AP 23.74 3 48 46L.H. 65568 AP 23.74 3 48 46R.H. 65591 3 32.68 3 48 46L.H. 65590 3 32.68 3 48 46R.H. 65563 4 23.74 3 48 46L.H. 65564 4 23.74 3 48 46R.H. 65573 10 23.74 3 48 46L.H. 65574 10 23.74 3 48 46R.H. 65559 10A 32.68 3 48 46L.H. 65560 10A 32.68 3 48 46R.H. 65599 10B 32.68 3 48 46L.H. 65598 10B 32.68 3 48 46R.H. 65594 26 32.68 3 48 46L.H. 65595 26 32.68 3 48 46R.H. 65579 26D 23.90 3 48 46L.H. 65580 26D 23.90 3 48 46R.H. 65585 D3 23.74 3 48 46L.H. 65586 D3 23.74 3 48 46R.H. 65587 D4 23.74 3 48 46L.H. 65588 D4 23.74 3 48 464 1 ⁄2" x 4 1 ⁄2"114.30 mm x 114.30 mmR.H. 65605 P 21.99 3 48 49L.H. 65606 P 21.99 3 48 49R.H. 65611 AP 23.74 3 48 49L.H. 65612 AP 23.74 3 48 49R.H. 65632 3 32.68 3 48 49L.H. 65631 3 32.68 3 48 49R.H. 65607 4 23.74 3 48 49L.H. 65608 4 23.74 3 48 49R.H. 65617 10 23.74 3 48 49L.H. 65618 10 23.74 3 48 49R.H. 65640 10A 32.68 3 48 49Price Code 20L.H. 65641 10A 32.68 3 48 49R.H. 65636 10B 32.68 3 48 49TA2731 L.H. 65635 10B 32.68 3 48 49

FM-35FULL MORTISE HINGESSTEEL STANDARD WEIGHTTWO KNUCKLE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTcontinued R.H. 65634 26 32.68 3 48 49L.H. 65637 26 32.68 3 48 49R.H. 65623 26D 23.46 3 48 49L.H. 65624 26D 23.46 3 48 49R.H. 65627 D3 23.74 3 48 49L.H. 65628 D3 23.74 3 48 49R.H. 65629 D4 23.74 3 48 49L.H. 65630 D4 23.74 3 48 495" x 4"Price Code 20127 mm x 101.60 mmR.H. 65653 P 38.43 3 24 26L.H. 65654 P 38.43 3 24 26R.H. 65659 AP 41.11 3 24 26L.H. 65660 AP 41.11 3 24 26R.H. 65649 3 54.36 3 24 26L.H. 65650 3 54.36 3 24 26R.H. 65651 4 41.11 3 24 26L.H. 65652 4 41.11 3 24 26R.H. 65665 10 41.11 3 24 26L.H. 65666 10 41.11 3 24 26R.H. 65675 10A 54.36 3 24 26L.H. 65676 10A 54.36 3 24 26R.H. 65677 10B 54.36 3 24 26L.H. 65678 10B 54.36 3 24 26R.H. 65667 26 54.36 3 24 26L.H. 65668 26 54.36 3 24 26R.H. 65671 26D 46.04 3 24 26L.H. 65672 26D 46.04 3 24 26R.H. 65679 D3 41.11 3 24 26L.H. 65680 D3 41.11 3 24 26R.H. 65681 D4 41.11 3 24 26L.H. 65682 D4 41.11 3 24 265" x 4 1 ⁄ 2 "127 mm x 114.30 mmR.H. 65701 P 38.43 3 24 29L.H. 65702 P 38.43 3 24 29R.H. 65707 AP 41.11 3 24 29L.H. 65708 AP 41.11 3 24 29R.H. 65703 3 54.36 3 24 29L.H. 65704 3 54.36 3 24 29R.H. 65705 4 41.11 3 24 29L.H. 65706 4 41.11 3 24 29R.H. 65713 10 41.11 3 24 29L.H. 65714 10 41.11 3 24 29R.H. 65733 10A 54.36 3 24 29L.H. 65734 10A 54.36 3 24 29R.H. 65725 10B 54.36 3 24 29FM-351.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM-36FULL MORTISE HINGESSTEEL STANDARD WEIGHTTWO KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA2731 L.H. 65726 10B 54.36 3 24 29continued R.H. 65721 26 54.36 3 24 29L.H. 65722 26 54.36 3 24 29R.H. 65719 26D 46.04 3 24 29L.H. 65720 26D 46.04 3 24 29R.H. 65729 D3 41.11 3 24 29L.H. 65730 D3 41.11 3 24 29R.H. 65731 D4 41.11 3 24 29L.H. 65732 D4 41.11 3 24 295" x 5"Price Code 20FM-36127 mm x 127 mmR.H. 65749 P 39.26 3 24 32L.H. 65750 P 39.26 3 24 32R.H. 65755 AP 41.11 3 24 32L.H. 65756 AP 41.11 3 24 32R.H. 65743 3 54.36 3 24 32L.H. 65744 3 54.36 3 24 32R.H. 65745 4 41.11 3 24 32L.H. 65746 4 41.11 3 24 32R.H. 65761 10 41.11 3 24 32L.H. 65762 10 41.11 3 24 32R.H. 65771 10A 54.36 3 24 32L.H. 65772 10A 54.36 3 24 32R.H. 65769 10B 54.36 3 24 32L.H. 65770 10B 54.36 3 24 32R.H. 65759 26 54.36 3 24 32L.H. 65760 26 54.36 3 24 32R.H. 65767 26D 46.04 3 24 32L.H. 65768 26D 46.04 3 24 32R.H. 65773 D3 41.11 3 24 32L.H. 65774 D3 41.11 3 24 32R.H. 65775 D4 41.11 3 24 32L.H. 65776 D4 41.11 3 24 32

FM-37FULL MORTISE HINGESSTEEL STANDARD WEIGHT WIDE THROWFIVE KNUCKLE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA2798 3 1 ⁄2" x 5" 65294 P 29.09 3 24 2488.90 mm x 127 mm65305 AP 30.30 3 24 2465295 3 37.16 3 24 2465296 4 37.16 3 24 2465299 10 30.30 3 24 2465309 10A 37.16 3 24 2465300 10B 37.16 3 24 2465303 26 37.16 3 24 2465304 26D 33.02 3 24 243 1 ⁄2" x 6" 65323 P 29.09 3 24 3088.90 mm x 152.4 mm65334 AP 30.30 3 24 3065324 3 37.16 3 24 3065325 4 29.09 3 24 3065328 10 30.30 3 24 3065337 10A 37.16 3 24 3065329 10B 37.16 3 24 3065332 26 37.16 3 24 3065333 26D 33.02 3 24 304" x 6" 65346 P 41.00 3 24 34101.60 mm x 152.4 mm65357 AP 42.30 3 24 3465347 3 49.44 3 24 3465348 4 41.00 3 24 3465351 10 42.40 3 24 3465360 10A 49.44 3 24 3465352 10B 49.44 3 24 3465355 26 49.44 3 24 3465356 26D 45.31 3 24 344" x 7" 65378 P 41.00 3 24 363101.60 mm x 177.8 mm65389 AP 42.30 3 24 3665379 3 49.44 3 24 3665380 4 41.00 3 24 3665383 10 42.40 3 24 3665392 10A 49.44 3 24 3665384 10B 49.44 3 24 3665387 26 49.44 3 24 3665388 26D 45.31 3 24 364 1 ⁄2" x 6" 59046 P 62.85 3 24 39114.30 mm x 152.4 mm65404 AP 64.35 3 24 3965393 3 71.96 3 24 3965394 4 62.85 3 24 3959054 10 64.35 3 24 3965405 10A 71.96 3 24 3965397 10B 71.96 3 24 3965400 26 71.96 3 24 3959052 26D 67.45 3 24 39Price Code 50FM-371.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM38FULL MORTISE HINGESSTEEL STANDARD WEIGHT WIDE THROWFIVE KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHFM38PRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA2798 4 1 ⁄2" x 7" 59100 P 62.85 3 24 42continued114.30 mm x 177.8 mm59109 AP 64.35 3 24 4259098 3 71.96 3 24 4259099 4 62.85 3 24 4259103 10 64.35 3 24 4259106 10A 71.96 3 24 4259104 10B 71.96 3 24 4262541 26 71.96 3 24 4262542 26D 67.45 3 24 424 1 ⁄2" x 8" 62548 P 62.85 3 24 48114.30 mm x 203.2 mm62559 AP 64.35 3 24 4862549 3 71.96 3 24 4862550 4 62.85 3 24 4862553 10 64.35 3 24 4862562 10A 71.96 3 24 4862554 10B 71.96 3 24 4862557 26 71.96 3 24 4862558 26D 67.45 3 24 485" x 7" 59157 P 76.93 3 24 51127 mm x 177.8 mm62583 AP 78.44 3 24 5162573 3 86.23 3 24 5162574 4 76.93 3 24 5162577 10 78.44 3 24 5162586 10A 86.23 3 24 5162578 10B 86.23 3 24 5162581 26 86.23 3 24 5162582 26D 81.72 3 24 515" x 8" 62604 P 76.93 3 24 58127 mm x 203.2 mm62615 AP 78.44 3 24 5862605 3 86.23 3 24 5862606 4 76.93 3 24 5862609 10 78.44 3 24 5862618 10A 86.23 3 24 5862610 10B 86.23 3 24 5862613 26 86.23 3 24 5862614 26D 81.72 3 24 58Price Code 50

FM39FULL MORTISE HINGESSTEEL STANDARD WEIGHT SWING CLEARFIVE KNUCKLE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA2895 4 1 ⁄2" 57000 P 90.42 3 24 38114.30 mm57001 AP 93.92 3 24 3857008 3 110.97 3 24 3857002 4 85.39 3 24 3857003 10 93.92 3 24 3856999 10A 110.97 3 24 3857004 10B 110.97 3 24 3857011 26 100.88 3 24 3857006 26D 65.87 3 24Hinge is NRP and Reversible for handingSTANDARD WEIGHT FIVE KNUCKLE NON-FERROUS BEARINGTA3313 3 1 ⁄2" x 3 1 ⁄2" 60238 P 43.05 3 48 5288.90 mm x 88.90 mm60231 AP 43.05 3 48 5260222 3 54.25 3 48 5260223 4 43.05 3 48 5260225 10 43.05 3 48 5260239 10A 54.25 3 48 5260226 10B 54.25 3 48 5260220 26 54.25 3 48 5260227 26D 45.97 3 48 524" x 4" 60346 P 47.82 3 48 46101.60 mm x 101.60 mm60353 AP 47.82 3 48 4660341 3 58.74 3 48 4660337 4 47.82 3 48 4660343 10 47.82 3 48 4660356 10A 58.74 3 48 4660338 10B 58.74 3 48 4660349 26 58.74 3 48 4660351 26D 53.57 3 48 464 1 ⁄2" x 4" 60450 P 45.87 3 48 53114.30 mm x 101.60 mm60452 AP 45.87 3 48 5360449 3 61.86 3 48 5360445 4 45.87 3 48 5360451 10 45.87 3 48 5360454 10A 61.86 3 48 5360552 10B 61.86 3 48 5360453 26 61.86 3 48 5360455 26D 53.57 3 48 534 1 ⁄2" x 4 1 ⁄2" 60570 P 45.87 3 48 57114.30 mm x 114.30 mm60589 AP 45.87 3 48 5760573 3 61.86 3 48 5760569 4 45.87 3 48 5760575 10 45.87 3 48 5760591 10A 61.86 3 48 57Price Code 5060585 10B 61.86 3 48 5760579 26 61.86 3 48 5760581 26D 53.57 3 48 57FM391.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM40FULL MORTISE HINGESNON-FERROUS STANDARD WEIGHTFIVE KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHFM40PRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA3313 5" x 4" 60710 P 61.86 3 24 33continued127 mm x 101.60 mm60711 AP 61.86 3 24 3360712 3 74.99 3 24 3360713 4 61.86 3 24 3360714 10 61.86 3 24 3360715 10A 74.99 3 24 3360716 10B 74.99 3 24 3360717 26 74.99 3 24 3360718 26D 66.72 3 24 335" x 4 1 ⁄2" 60742 P 61.86 3 24 36127 mm x 114.30 mm60745 AP 61.86 3 24 3660735 3 74.99 3 24 3660730 4 61.86 3 24 3660739 10 61.86 3 24 3660753 10A 74.99 3 24 3660734 10B 74.99 3 24 3660737 26 74.99 3 24 3660741 26D 66.72 3 24 365" x 5" 60859 P 61.86 3 24 38127 mm x 127 mm60870 AP 61.86 3 24 3860854 3 74.99 3 24 3860850 4 61.86 3 24 3860856 10 61.86 3 24 3860869 10A 74.99 3 24 3860871 10B 74.99 3 24 3860864 26 74.99 3 24 3860866 26D 66.72 3 24 386" x 6" 60974 P 102.75 3 18 43152.4 mm x 152.4 mm60939 AP 102.75 3 18 4360975 3 127.59 3 18 4360976 4 102.75 3 18 4360968 10 102.75 3 18 4360979 10A 127.59 3 18 4360969 10B 127.59 3 18 4360938 26 127.59 3 18 4360970 26D 114.83 3 18 43Price Code 50

FM41FULL MORTISE HINGESNON-FERROUS STANDARD WEIGHTTWO KNUCKLE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHTA3331 3 1 ⁄2" x 3 1 ⁄2"Price Code 2088.90 mm x 88.90 mmR.H. 66239 P 56.62 3 48 33L.H. 66240 P 56.62 3 48 33R.H. 66245 AP 56.62 3 48 33L.H. 66246 AP 56.62 3 48 33R.H. 66217 3 67.10 3 48 33L.H. 66218 3 67.10 3 48 33R.H. 66219 4 56.62 3 48 33L.H. 66220 4 56.62 3 48 33R.H. 66241 10 56.62 3 48 33L.H. 66242 10 56.62 3 48 33R.H. 66237 10A 67.10 3 48 33L.H. 66238 10A 67.10 3 48 33R.H. 66247 10B 67.10 3 48 33L.H. 66248 10B 67.10 3 48 33R.H. 66227 26 67.10 3 48 33L.H. 66228 26 67.10 3 48 33R.H. 66243 26D 59.18 3 48 33L.H. 66244 26D 59.18 3 48 334" x 4"101.60 mm x 101.60 mmR.H. 66258 P 57.86 3 48 46L.H. 66259 P 57.86 3 48 46R.H. 66260 AP 57.86 3 48 46L.H. 66261 AP 57.86 3 48 46R.H. 66105 3 72.86 3 48 46L.H. 66106 3 72.86 3 48 46R.H. 70286 4 57.86 3 48 46L.H. 70287 4 57.86 3 48 46R.H. 66085 10 57.86 3 48 46L.H. 66086 10 57.86 3 48 46R.H. 66264 10A 70.80 3 48 46L.H. 66265 10A 70.80 3 48 46R.H. 66262 10B 70.80 3 48 46L.H. 66263 10B 70.80 3 48 46R.H. 66091 26 70.80 3 48 46L.H. 66092 26 70.80 3 48 46R.H. 66097 26D 64.74 3 48 46L.H. 66098 26D 64.74 3 48 464 1 ⁄2" x 4"114.30 mm x 101.60 mmPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTR.H. 66287 P 61.34 3 48 53L.H. 66288 P 61.34 3 48 53R.H. 66289 AP 61.34 3 48 53L.H. 66290 AP 61.34 3 48 53R.H. 66315 3 78.40 3 48 53L.H. 66316 3 78.40 3 48 53FM411.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM42FULL MORTISE HINGESNON-FERROUS STANDARD WEIGHTTWO KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA3331 R.H. 66319 4 55.77 3 48 53continued L.H. 66320 4 55.77 3 48 53R.H. 66295 10 61.34 3 48 53L.H. 66296 10 61.34 3 48 53R.H. 66285 10A 78.40 3 48 53L.H. 66286 10A 78.40 3 48 53R.H. 66291 10B 78.40 3 48 53L.H. 66292 10B 78.40 3 48 53R.H. 66301 26 78.40 3 48 53L.H. 66302 26 78.40 3 48 53R.H. 66307 26D 69.67 3 48 53L.H. 66308 26D 69.67 3 48 53R.H. 66293 32 96.08 3 48 53L.H. 66294 32 96.08 3 48 53R.H. 66297 32D 91.35 3 48 53L.H. 66298 32D 91.35 3 48 534 1 ⁄2" x 4 1 ⁄2"Price Code 20FM42114.30 mm x 114.30 mmR.H. 66369 P 61.34 3 48 57L.H. 66370 P 61.34 3 48 57R.H. 66355 AP 61.34 3 48 57L.H. 66356 AP 61.34 3 48 57R.H. 66353 3 78.40 3 48 57L.H. 66354 3 78.40 3 48 57R.H. 66357 4 59.49 3 48 57L.H. 66358 4 59.49 3 48 57R.H. 66337 10 59.49 3 48 57L.H. 66338 10 59.49 3 48 57R.H. 66367 10A 78.40 3 48 57L.H. 66368 10A 78.40 3 48 57R.H. 66371 10B 78.40 3 48 57L.H. 66372 10B 78.40 3 48 57R.H. 66343 26 78.40 3 48 57L.H. 66344 26 78.40 3 48 57R.H. 66349 26D 69.67 3 48 57L.H. 66350 26D 69.67 3 48 57R.H. 66333 32 96.08 3 48 57L.H. 66334 32 96.08 3 48 57R.H. 66335 32D 91.35 3 48 57L.H. 66336 32D 91.35 3 48 575" x 4"127 mm x 101.60 mmR.H. 66407 P 76.03 3 24 33L.H. 66408 P 76.03 3 24 33R.H. 66409 AP 76.03 3 24 33L.H. 66410 AP 76.03 3 24 33R.H. 66417 3 95.87 3 24 33L.H. 66418 3 95.87 3 24 33

FM43FULL MORTISE HINGESNON-FERROUS STANDARD WEIGHTTWO KNUCKLE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA3331 5" x 4"continued127 mm x 101.60 mmR.H. 66419 4 76.03 3 24 33L.H. 66420 4 76.03 3 24 33R.H. 66379 10 76.03 3 24 33L.H. 66380 10 76.03 3 24 33R.H. 66405 10A 95.87 3 24 33L.H. 66406 10A 95.87 3 24 33R.H. 66411 10B 95.87 3 24 33L.H. 66412 10B 95.87 3 24 33R.H. 66385 26 95.87 3 24 33L.H. 66386 26 95.87 3 24 33R.H. 66391 26D 83.84 3 24 33L.H. 66392 26D 83.84 3 24 33R.H. 66381 32 116.93 3 24 33L.H. 66382 32 116.93 3 24 33R.H. 66383 32D 112.21 3 24 33L.H. 66384 32D 112.21 3 24 335" x 4 1 ⁄2"Price Code 20127 mm x 114.30 mmR.H. 66455 P 76.03 3 24 36L.H. 66456 P 76.03 3 24 36R.H. 66457 AP 76.03 3 24 36L.H. 66458 AP 76.03 3 24 36R.H. 66441 3 95.87 3 24 36L.H. 66442 3 95.87 3 24 36R.H. 66443 4 76.03 3 24 36L.H. 66444 4 76.03 3 24 36R.H. 66421 10 76.03 3 24 36L.H. 66422 10 76.03 3 24 36R.H. 66453 10A 95.87 3 24 36L.H. 66454 10A 95.87 3 24 36R.H. 66459 10B 95.87 3 24 36L.H. 66460 10B 95.87 3 24 36R.H. 66427 26 95.87 3 24 36L.H. 66428 26 95.87 3 24 36R.H. 66433 26D 83.84 3 24 36L.H. 66434 26D 83.84 3 24 36R.H. 66423 32 116.93 3 24 36L.H. 66424 32 116.93 3 24 36R.H. 66425 32D 112.21 3 24 36L.H. 66426 32D 112.21 3 24 365" x 5"127 mm x 127 mmR.H. 66491 P 76.03 3 24 38L.H. 66492 P 76.03 3 24 38R.H. 66493 AP 76.03 3 24 38L.H. 66494 AP 76.03 3 24 38FM431.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM44FULL MORTISE HINGESNON-FERROUS STANDARD WEIGHTTWO KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA3331 5" x 5"continued127 mm x 127 mmR.H. 66499 3 95.87 3 24 38L.H. 66500 3 95.87 3 24 38R.H. 66489 4 76.03 3 24 38L.H. 66490 4 76.03 3 24 38R.H. 66463 10 76.03 3 24 38L.H. 66464 10 76.03 3 24 38R.H. 66487 10A 95.87 3 24 38L.H. 66488 10A 95.87 3 24 38R.H. 66495 10B 95.87 3 24 38L.H. 66496 10B 95.87 3 24 38R.H. 66469 26 95.87 3 24 38L.H. 66470 26 95.87 3 24 38R.H. 66475 26D 83.84 3 24 38L.H. 66476 26D 83.84 3 24 38R.H. 66465 32 116.93 3 24 38L.H. 66466 32 116.93 3 24 38R.H. 66467 32D 112.21 3 24 38L.H. 66468 32D 112.21 3 24 38Price Code 20FM44

FM45FULL MORTISE HINGESNON-FERROUS HEAVY WEIGHTTWO KNUCKLE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHTA3350 4 1 ⁄2" x 4 1 ⁄2"Price Code 20114.30 mm x 114.30 mmPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTR.H. 66627 P 96.08 3 24 37L.H. 66628 P 96.08 3 24 37R.H. 66649 AP 96.08 3 24 37L.H. 66650 AP 96.08 3 24 37R.H. 66749 3 117.24 3 24 37L.H. 66750 3 117.24 3 24 37R.H. 66751 4 96.08 3 24 37L.H. 66752 4 96.08 3 24 37R.H. 66631 10 96.08 3 24 37L.H. 66632 10 96.08 3 24 37R.H. 66651 10A 117.24 3 24 37L.H. 66652 10A 117.24 3 24 37R.H. 66629 10B 117.24 3 24 37L.H. 66630 10B 117.24 3 24 37R.H. 66637 26 117.24 3 24 37L.H. 66638 26 117.24 3 24 37R.H. 66643 26D 103.37 3 24 37L.H. 66644 26D 103.37 3 24 37R.H. 66633 32 141.49 3 24 37L.H. 66634 32 141.49 3 24 37R.H. 66639 32D 136.66 3 24 37L.H. 66640 32D 136.66 3 24 375" x 4 1 ⁄2"127 mm x 114.30 mmR.H. 66709 P 113.54 3 24 41L.H. 66710 P 113.54 3 24 41R.H. 66679 AP 113.54 3 24 41L.H. 66680 AP 113.54 3 24 41R.H. 66737 3 137.08 3 24 41L.H. 66738 3 137.08 3 24 41R.H. 66739 4 113.54 3 24 41L.H. 66740 4 113.54 3 24 41R.H. 66661 10 113.54 3 24 41L.H. 66662 10 113.54 3 24 41R.H. 66713 10A 137.08 3 24 41L.H. 66714 10A 137.08 3 24 41R.H. 66711 10B 137.08 3 24 41L.H. 66712 10B 137.08 3 24 41R.H. 66667 26 137.08 3 24 41L.H. 66668 26 137.08 3 24 41R.H. 66673 26D 120.94 3 24 41L.H. 66674 26D 120.94 3 24 41R.H. 66663 32 164.71 3 24 41L.H. 66664 32 164.71 3 24 41R.H. 66669 32D 159.99 3 24 41L.H. 66670 32D 159.99 3 24 41FM451.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM46FULL MORTISE HINGESNON-FERROUS HEAVY WEIGHTTWO KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHFM46PRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA3350 5" x 5"continued127 mm x 127 mmR.H. 66757 P 107.63 3 24 45L.H. 66758 P 107.63 3 24 45R.H. 66759 AP 107.63 3 24 45L.H. 66760 AP 107.63 3 24 45R.H. 66725 3 129.92 3 24 45L.H. 66726 3 129.92 3 24 45R.H. 66727 4 107.63 3 24 45L.H. 66728 4 107.63 3 24 45R.H. 66691 10 113.54 3 24 45L.H. 66692 10 113.54 3 24 45R.H. 66689 10A 137.08 3 24 45L.H. 66690 10A 137.08 3 24 45R.H. 66761 10B 137.08 3 24 45L.H. 66762 10B 137.08 3 24 45R.H. 66697 26 137.08 3 24 45L.H. 66698 26 137.08 3 24 45R.H. 66703 26D 120.94 3 24 45L.H. 66704 26D 120.94 3 24 45R.H. 66693 32 156.12 3 24 45L.H. 66694 32 156.12 3 24 45R.H. 66695 32D 151.64 3 24 45L.H. 66696 32D 151.64 3 24 45Price Code 20

FM47FULL MORTISE HINGESNON-FERROUS HEAVY WEIGHTFIVE KNUCKLE BEARING✓=June 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT4A3386 4 1 ⁄2" x 4 1 ⁄2" 61801 P 69.92 3 24 37114.30 mm x 114.30 mm61794 3 67.53 3 24 3761790 4 63.57 3 24 3761796 10 62.23 3 24 3761793 10A 77.82 3 24 3761795 10B 58.20 3 24 3761802 26 77.82 3 24 3761804 ✓ 26D 51.06 3 24 3761791 32 83.02 3 24 3761787 ✓ 32D 67.75 3 24 374 1 ⁄2" x 4 1 ⁄2" 61813 10-NRP 57.21 3 24 37114.30 mm x 114.30 mm61815 10B-NRP 60.90 3 24 37(NRP) 61812 ✓ 26D-NRP 53.83 3 24 3761814 ✓ 32D-NRP 70.44 3 24 375" x 4 1 ⁄2" 61879 P 83.48 3 24 43127 mm x 114.30 mm70912 3 98.55 3 24 4370913 4 83.48 3 24 4361862 10 72.43 3 24 4361874 10A 98.55 3 24 4361873 10B 98.55 3 24 4361870 26 98.55 3 24 4361866 26D 77.43 3 24 4361865 32 77.43 3 24 4361868 32D 76.78 3 24 435" x 4 1 ⁄2" 61863 10-NRP 87.94 3 24 43127 mm x 114.30 mm61861 10B-NRP 89.17 3 24 43(NRP) 61869 26D-NRP 81.04 3 24 4361871 32D-NRP 79.47 3 24 435" x 5" 61938 P 83.48 3 24 47127 mm x 127 mm61933 3 98.55 3 24 4761929 4 83.48 3 24 4761935 10 83.48 3 24 4761924 10A 98.55 3 24 4761930 10B 78.47 3 24 4761941 26 98.55 3 24 4761943 26D 86.77 3 24 4761926 32 114.83 3 24 4761928 32D 102.65 3 24 476" x 5" 68832 P 119.11 3 18 43152.40 mm x 127 mm68833 3 149.98 3 18 4368834 4 119.11 3 18 4368827 10 118.52 3 18 4368841 10A 149.98 3 18 4368828 10B 149.98 3 18 4368838 26 149.98 3 18 4368839 26D 128.66 3 18 43Price Code 5068823 32 178.71 3 18 4368824 32D 174.04 3 18 43FM471.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM48FULL MORTISE HINGESNON-FERROUS HEAVY WEIGHTFIVE KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHFM48PRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT4A3386 6" x 6" 64612 P 119.11 3 18 74continued152.40 mm x 152.40 mm64613 3 149.98 3 18 7464614 4 119.11 3 18 7464602 10 119.11 3 18 7464620 10A 149.98 3 18 7464607 10B 149.98 3 18 7464617 26 149.98 3 18 7464618 26D 128.66 3 18 7464603 32 178.71 3 18 7464604 32D 174.04 3 18 74T6A3386 8" x 6" 68911 P 239.49 3 12 55203.20 mm x 152.4 mm68912 3 284.57 3 12 5568913 4 239.49 3 12 5568906 10 239.49 3 12 5568920 10A 284.57 3 12 5568907 10B 284.57 3 12 5568917 26 284.57 3 12 5568918 26D 247.86 3 12 558" x 8" 69024 P 239.49 3 12 66203.2 mm x 203.2 mm69025 3 284.57 3 12 6669026 4 239.49 3 12 6669016 10 239.49 3 12 6669021 10A 284.57 3 12 6669017 10B 284.57 3 12 6669030 26 284.57 3 12 6669031 26D 247.86 3 12 66Price Code 50

FM49FULL MORTISE HINGESNON-FERROUS HEAVY WEIGHTFIVE KNUCKLE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTCA3386 4 1 ⁄2" x 4 1 ⁄2" 68136 P 76.73 3 24 37114.30 mm x 114.30 mm68138 3 85.61 3 24 3768134 4 76.73 3 24 3768139 10 68.47 3 24 3768140 10A 85.61 3 24 3768141 10B 85.61 3 24 3768142 26 85.61 3 24 3768132 26D 75.09 3 24 3768143 32 90.57 3 24 3768133 32D 99.63 3 24 375" x 4 1 ⁄2" 68156 P 91.94 3 24 43127 mm x 114.30 mm68158 3 108.40 3 24 4368154 4 91.94 3 24 4368159 10 91.94 3 24 4368160 10A 108.40 3 24 4368161 10B 108.40 3 24 4368162 26 108.40 3 24 4368152 26D 85.32 3 24 4368163 32 126.32 3 24 4368153 32D 112.88 3 24 435" x 5" 68171 P 91.94 3 24 47127 mm x 127 mm68173 3 108.40 3 24 4768169 4 91.94 3 24 47Wide throw not available68174 10 91.94 3 24 47in TCA Series68175 10A 108.40 3 24 4768176 10B 108.40 3 24 4768177 26 108.40 3 24 4768167 26D 85.32 3 24 4768178 32 126.32 3 24 4768168 32D 112.88 3 24 47T4A3386 4 1 ⁄2" x 5" 70971 P 149.01 3 24 60Wide Throw114.30 mm x 127 mm70973 3 192.74 3 24 6070974 4 149.01 3 24 6070975 10 149.01 3 24 6070976 10A 192.74 3 24 6070977 10B 192.74 3 24 6070978 26 192.74 3 24 6070970 26D 161.19 3 24 6070979 32 217.48 3 24 6070990 32D 212.90 3 24 604 1 ⁄2" x 6" 71052 P 154.37 3 24 60114.30 mm x 152.4 mm71054 3 198.49 3 24 6071055 4 154.37 3 24 6071056 10 154.37 3 24 6071057 10A 198.49 3 24 60Price Code 5071058 10B 198.49 3 24 6071059 26 198.49 3 24 6071050 26D 174.91 3 24 60FM491.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM50FULL MORTISE HINGESNON-FERROUS HEAVY WEIGHTWIDE THROW FIVE KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHFM50PRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT4A3386 4 1 ⁄2" x 6" 71060 32 221.08 3 24 60continued114.30 mm x 152.40 mm71051 32D 216.99 3 24 604 1 ⁄2" x 7" 71000 P 158.56 3 24 60114.30 mm x 177.8 mm71001 3 203.06 3 24 6071002 4 158.56 3 24 6071010 10 158.56 3 24 6071017 10A 203.06 3 24 6071011 10B 203.06 3 24 6071006 26 203.06 3 24 6071007 26D 179.29 3 24 6071015 32 229.94 3 24 6071016 32D 224.29 3 24 604 1 ⁄2" x 8" 71087 P 176.18 3 24 60114.30 mm x 203.2 mm71089 3 210.95 3 24 6071090 4 176.18 3 24 6071091 10 176.18 3 24 6071092 10A 210.95 3 24 6071093 10B 210.95 3 24 6071094 26 210.95 3 24 6071085 26D 180.96 3 24 6071095 32 241.63 3 24 6071086 32D 237.05 3 24 605" x 6" 70896 P 176.18 3 24 70127 mm x 152.4 mm70898 3 210.95 3 24 7070899 4 176.18 3 24 7071065 10 176.18 3 24 7071066 10A 210.95 3 24 7071067 10B 210.95 3 24 7071068 26 210.95 3 24 7070892 26D 180.96 3 24 7071069 32 241.63 3 24 7070893 32D 237.05 3 24 705" x 7" 70902 P 182.61 3 24 70127 mm x 177.8 mm70904 3 230.33 3 24 7070905 4 182.61 3 24 7070906 10 182.61 3 24 7070907 10A 230.33 3 24 7070908 10B 230.33 3 24 7070909 26 230.33 3 24 7070900 26D 191.17 3 24 7070910 32 248.35 3 24 7070901 32D 243.97 3 24 705" x 8" 70952 P 189.04 3 24 70127 mm x 203.2 mm70954 3 235.39 3 24 7070955 4 189.04 3 24 7070956 10 189.04 3 24 70Price Code 5070957 10A 235.39 3 24 7070958 10B 235.39 3 24 70

FM51FULL MORTISE HINGESNON-FERROUS HEAVY WEIGHTWIDE THROW FIVE KNUCKLE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHT4A3386 5" x 8" 70959 26 235.39 3 24 70continued127 mm x 203.2 mm70950 26D 196.44 3 24 7070949 32 254.88 3 24 7070951 32D 250.49 3 24 70HEAVY WEIGHT STAINLESS STEEL SWING CLEART4A3395 4 1 ⁄2" 55195 32D 137.75 3 24 59Hinges are NRP 5" 55196 32D 149.27 3 24 59and Reversible.STEEL FIVE KNUCKLE STANDARD WEIGHT BEARINGPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA3713 4 1 ⁄2" x 4 1 ⁄2" 57230 P 33.95 3 48 55114.3 mm x 114.3 mm57244 AP 33.95 3 48 5557241 3 50.41 3 48 5557243 4 33.95 3 48 5557235 10 33.95 3 48 5557247 10A 50.41 3 48 5557239 10B 50.41 3 48 5557238 26 50.41 3 48 5557237 26D 37.19 3 48 555" x 4" 57419 P 45.54 3 24 29127 mm x 101.6 mm57420 AP 45.54 3 24 2957421 3 54.08 3 24 2957422 4 45.54 3 24 2957423 10 45.54 3 24 2957424 10A 56.65 3 24 2957425 10B 54.08 3 24 2957426 26 54.08 3 24 2957418 26D 47.68 3 24 295" x 4 1 ⁄2" 57318 P 45.54 3 24 32127 mm x 114.3 mm 57319 AP 45.54 3 24 3257324 3 54.08 3 24 3257321 4 45.54 3 24 3257320 10 45.54 3 24 3257315 10A 54.08 3 24 3257316 10B 54.08 3 24 3257314 26 54.08 3 24 3257322 26D 47.68 3 24 325" x 5" 57374 P 45.54 3 24 34127 mm x 127 mm 57378 AP 45.54 3 24 3457371 3 54.08 3 24 3457370 4 45.54 3 24 3457376 10 45.54 3 24 3457379 10A 54.08 3 24 3457369 10B 54.08 3 24 34Price Code 5057363 26 54.08 3 24 3457367 26D 47.68 3 24 34FM511.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM52FULL MORTISE HINGESSTEEL HEAVY WEIGHTTWO KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHTA3750 4 1 ⁄2" x 4 1 ⁄2"Price Code 20FM52114.30 mm x 114.30 mmPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTR.H. 66523 P 57.24 3 24 37L.H. 66524 P 57.24 3 24 37R.H. 66528 AP 66.79 3 24 37L.H. 66527 AP 66.79 3 24 37R.H. 66513 3 81.39 3 24 37L.H. 66514 3 81.39 3 24 37R.H. 66515 4 66.79 3 24 37L.H. 66516 4 66.79 3 24 37R.H. 66505 10 66.79 3 24 37L.H. 66506 10 66.79 3 24 37R.H. 66533 10A 81.39 3 24 37L.H. 66534 10A 81.39 3 24 37R.H. 66532 10B 81.39 3 24 37L.H. 66531 10B 81.39 3 24 37R.H. 66511 26 81.39 3 24 37L.H. 66512 26 81.39 3 24 37R.H. 66517 26D 63.19 3 24 37L.H. 66518 26D 63.19 3 24 375" x 4 1 ⁄2"127 mm x 114.30 mmR.H. 66565 P 75.93 3 24 39L.H. 66566 P 75.93 3 24 39R.H. 66569 AP 87.23 3 24 39L.H. 66570 AP 87.23 3 24 39R.H. 66561 3 99.16 3 24 39L.H. 66562 3 99.16 3 24 39R.H. 66563 4 79.94 3 24 39L.H. 66564 4 79.94 3 24 39R.H. 66547 10 79.94 3 24 39L.H. 66548 10 79.94 3 24 39R.H. 66571 10A 99.16 3 24 39L.H. 66572 10A 99.16 3 24 39R.H. 66581 10B 99.16 3 24 39L.H. 66582 10B 99.16 3 24 39R.H. 66553 26 99.16 3 24 39L.H. 66554 26 99.16 3 24 39R.H. 66559 26D 75.63 3 24 39L.H. 66560 26D 75.63 3 24 395" x 5"127 mm x 127 mmR.H. 66607 P 75.93 3 24 42L.H. 66608 P 75.93 3 24 42R.H. 66623 AP 87.23 3 24 42L.H. 66624 AP 87.23 3 24 42R.H. 66603 3 99.16 3 24 42L.H. 66604 3 99.16 3 24 42

FM53FULL MORTISE HINGESSTEEL HEAVY WEIGHTTWO KNUCKLE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA3750 5" x 5"continued R.H. 66605 4 79.94 3 24 42L.H. 66606 4 79.94 3 24 42R.H. 66589 10 79.94 3 24 42L.H. 66590 10 79.94 3 24 42R.H. 66615 10A 99.16 3 24 42L.H. 66616 10A 99.16 3 24 42R.H. 66625 10B 99.16 3 24 42L.H. 66626 10B 99.16 3 24 42R.H. 66595 26 99.16 3 24 42L.H. 66596 26 99.16 3 24 42R.H. 66601 26D 75.63 3 24 42L.H. 66602 26D 75.63 3 24 42Price Code 20FM531.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM54FULL MORTISE HINGESSTEEL HEAVY WEIGHTFIVE KNUCKLE BEARING✓=June 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT4A3786 4 1 ⁄2" x 4 1 ⁄2" 58375 P 30.73 3 24 35114.30 mm x 114.30 mm58382 AP 48.23 3 24 3558343 3 39.02 3 24 3558344 4 34.39 3 24 3558345 9 57.89 3 24 3558379 10 31.86 3 24 3558367 10A 45.27 3 24 35Price Code 50FM5458346 ✓ 10B 39.02 3 24 3558377 26 39.02 3 24 3558384 26D 33.34 3 24 354 1 ⁄2" x 4 1 ⁄2" 58387 P-NRP 33.34 3 24 35114.30 mm x 114.30 mm58386 10-NRP 40.55 3 24 35✓(NRP) 58388 26D-NRP 35.99 3 24 355" x 4 1 ⁄2" 58440 P 36.34 3 24 41127 mm x 114.30 mm58447 AP 55.45 3 24 4158444 3 66.79 3 24 4158446 4 53.29 3 24 4158445 10 36.77 3 24 4158453 10A 60.18 3 24 4158464 10B 49.96 3 24 4158467 26 57.97 3 24 4158443✓26D 37.89 3 24 415" x 4 1 ⁄2" 58442 P-NRP 51.14 3 24 41127 mm x 114.30 mm(NRP) 58449✓26D-NRP 40.49 3 24 415" x 5" 58520 P 47.66 3 24 55127 mm x 127 mm58526 AP 55.45 3 24 5558530 3 66.79 3 24 5558527 4 53.29 3 24 5558524 10 44.69 3 24 5558519 10A 66.79 3 24 5558532 10B 57.97 3 24 5558538 26 66.79 3 24 6458522 26D 37.89 3 24 646" x 5" 72783 P 89.50 3 18 42152.4 mm x127 mm72784 AP 93.17 3 18 4272788 3 114.18 3 18 4272789 4 93.17 3 18 4272791 10 93.17 3 18 4272799 10A 114.18 3 18 4272792 10B 114.18 3 18 4272795 26 114.18 3 18 4272796 26D 96.92 3 18 42

FM55FULL MORTISE HINGESSTEEL HEAVY WEIGHTFIVE KNUCKLE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT4A3786 6" x 6" 58585 P 89.50 3 18 62continued152.4 mm x 152.4 mm58580 AP 93.17 3 18 6258596 3 114.18 3 18 6258597 4 93.17 3 18 6258588 10 93.17 3 18 6258594 10A 114.18 3 18 6258601 10B 114.18 3 18 6258583 26 114.18 3 18 6258586 26D 96.92 3 18 62Price Code 50FM551.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM56FULL MORTISE HINGESSTEEL HEAVY WEIGHT WIDE THROWFIVE KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT4A3786 4 1 ⁄2" x 5" 72701 P 96.63 3 24 55114.30 mm x 127 mm72702 AP 100.38 3 24 5572703 3 122.52 3 24 5572704 4 100.38 3 24 5572705 10 100.38 3 24 5572706 10A 122.52 3 24 5572707 10B 122.52 3 24 5572708 26 122.52 3 24 5572700 26D 104.71 3 24 554 1 ⁄2" x 6" 72729 P 96.63 3 24 55114.30 mm x 152.4 mm72730 AP 100.38 3 24 5572731 3 122.52 3 24 5572732 4 100.38 3 24 5572733 10 100.38 3 24 5572734 10A 122.52 3 24 5572735 10B 122.52 3 24 5572736 26 122.52 3 24 5572728 26D 104.71 3 24 554 1 ⁄2" x 7" 72755 P 96.63 3 24 55114.30 mm x 177.8 mm72756 AP 100.38 3 24 5572757 3 122.52 3 24 5572758 4 100.38 3 24 5572759 10 100.38 3 24 5572760 10A 122.52 3 24 5572761 10B 122.52 3 24 5572762 26 122.52 3 24 5572754 26D 104.71 3 24 554 1 ⁄2" x 8" 72801 P 96.63 3 24 55114.30 mm x 203.2 mm72802 AP 100.38 3 24 5572803 3 122.52 3 24 5572804 4 100.38 3 24 5572805 10 100.38 3 24 5572806 10A 122.52 3 24 5572807 10B 122.52 3 24 5572808 26 122.52 3 24 5572800 26D 104.71 3 24 555" x 6" 72851 P 99.92 3 24 64127 mm x 152.4 mm72852 AP 103.68 3 24 6472859 3 125.81 3 24 6472853 4 103.68 3 24 6472854 10 103.68 3 24 6472863 10A 125.81 3 24 6472855 10B 125.81 3 24 6472862 26 125.81 3 24 6472857 26D 107.14 3 24 64Price Code 50FM56

FM57FULL MORTISE HINGESSTEEL HEAVY WEIGHT WIDE THROWFIVE KNUCKLE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT4A3786 5" x 7" 72901 P 99.92 3 24 64continued127 mm x 177.8 mm72902 AP 103.68 3 24 6472909 3 125.81 3 24 6472903 4 103.68 3 24 6472904 10 103.68 3 24 6472913 10A 125.81 3 24 6472905 10B 125.81 3 24 6472912 26 125.81 3 24 6472907 26D 107.14 3 24 645" x 8" 72951 P 99.92 3 24 64127 mm x 203.2 mm72952 AP 103.68 3 24 6472959 3 125.81 3 24 6472953 4 103.68 3 24 6472954 10 103.68 3 24 6472963 10A 125.81 3 24 6472955 10B 125.81 3 24 6472962 26 125.81 3 24 6472957 26D 107.14 3 24 64Price Code 50FM571.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM58FULL MORTISE HINGESSTEEL HEAVY WEIGHT 6-BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT6A3786 8" x 6" 58629 P 183.41 3 12 49203.2 mm x 152.4 mm58630 AP 194.39 3 12 4958634 3 215.78 3 12 4958635 4 194.39 3 12 4958637 10 176.72 3 12 4958645 10A 215.78 3 12 4958638 10B 215.78 3 12 4958641 26 215.78 3 12 4958642 26D 183.51 3 12 498" x 8" 58667 P 183.41 3 12 59203.2 mm x 203.2 mm58668 AP 194.39 3 12 5958672 3 215.78 3 12 5958673 4 194.39 3 12 5958675 10 194.39 3 12 5958683 10A 215.78 3 12 5958676 10B 215.78 3 12 5958679 26 215.78 3 12 5958680 26D 183.51 3 12 59Price Code 50FM58

FM59FULL MORTISE HINGESSTEEL HEAVY WEIGHTCONCEALED BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTCA3786 4 1 ⁄2" x 4 1 ⁄2" 67320 P 45.22 3 24 35114.30 mm x 114.30 mm67321 AP 53.11 3 24 3567328 3 57.32 3 24 3567322 4 49.54 3 24 3567323 10 46.81 3 24 3567333 10A 57.32 3 24 3567324 10B 57.32 3 24 3567331 26 57.32 3 24 3567326 26D 49.07 3 24 3567332 PG 53.11 3 24 355" x 4 1 ⁄2" 67340 P 52.34 3 24 41127 mm x 114.30 mm67341 AP 60.78 3 24 4167348 3 73.46 3 24 4167342 4 58.64 3 24 4167343 10 54.04 3 24 4167353 10A 73.46 3 24 4167344 10B 73.46 3 24 4167351 26 73.46 3 24 4167346 26D 55.64 3 24 4167352 PG 60.78 3 24 415" x 5" 67360 P 52.34 3 24 43127 mm x 127 mm67361 AP 60.78 3 24 4367368 3 73.55 3 24 4367362 4 58.64 3 24 4367363 10 65.58 3 24 4367359 10A 73.55 3 24 4367364 10B 73.55 3 24 4367371 26 73.55 3 24 4367366 26D 55.64 3 24 43Price Code 50FM591.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM60FULL MORTISE HINGESSTEEL HEAVY WEIGHT SWING CLEARFIVE KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHFM60PRICE BOX CASE CASEEACH QTY. QTY. WEIGHTT4A3795 4 1 ⁄2" 73456 P 114.57 3 24 47114.30 mm73459 AP 116.74 3 24 4773460 3 140.06 3 24 4773461 4 105.74 3 24 4773462 10 116.31 3 24 4773465 10A 140.06 3 24 4773466 10B 140.06 3 24 4773467 26 140.06 3 24 4773463 26D 79.23 3 24 475" 73469 P 114.57 3 24 47127 mm73470 AP 116.74 3 24 4773474 3 140.06 3 24 4773475 4 116.80 3 24 4773477 10 116.31 3 24 4773485 10A 140.06 3 24 4773478 10B 140.06 3 24 4773481 26 127.32 3 24 4773482 26D 79.23 3 24 47STEEL SWING CLEAR HEAVY WEIGHT BEVELED EDGE BEARINGT4A4795 4 1 ⁄2" 73442 P 114.57 3 24 57114.30 mm73443 AP 116.74 3 24 5773444 3 140.06 3 24 5773445 4 116.31 3 24 5773446 10 116.31 3 24 5773447 10A 140.06 3 24 5773448 10B 140.06 3 24 5773449 26 140.06 3 24 5773451 26D 79.23 3 24 575" 73591 P 114.57 3 24 57127 mm73593 AP 116.74 3 24 5773594 3 140.06 3 24 5773595 4 116.31 3 24 5773596 10 116.31 3 24 5773597 10A 140.06 3 24 5773598 10B 140.06 3 24 5773599 26 140.06 3 24 5773590 26D 79.23 3 24 57Hinges are NRP, reversible and non-handed.Price Code 50

FM61FULL MORTISE HINGESSTEEL STANDARD WEIGHT SWING CLEARFIVE KNUCKLE BEARING FOR BEVELEDEDGE DOORSJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTTA4895 4 1 ⁄2" 57040 P 90.42 3 24 38114.30 mm57048 AP 94.63 3 24 3857044 3 111.18 3 24 3857042 4 94.63 3 24 3857043 10 94.23 3 24 3857047 10A 111.18 3 24 3857046 10B 111.18 3 24 3857045 26 111.18 3 24 3857041 26D 65.87 3 24 38Hinges are NRP, reversible and non-handed.Price Code 50FM611.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FM62FULL MORTISE HINGESSTEEL STANDARD WEIGHT FIVE KNUCKLEJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTMP79 4-1/2x4 76322 10B 2.41 3 48 5076334 P 1.28 3 48 50114.30.mm x 101.60 mm76310 3 2.41 3 48 5076314 4 1.51 3 48 5076326 26 2.41 3 48 5076330 26D 2.07 3 48 504-1/2x4 76323 10B NRP 2.87 3 48 5076335 P NRP 1.73 3 48 50114.30.mm x 101.60 mm76311 3 NRP 2.87 3 48 5076315 4 NRP 1.96 3 48 5076327 26 NRP 2.87 3 48 5076331 26D NRP 2.53 3 48 504-1/2x4-1/2 76356 10B 2.64 3 48 5476368 P 1.28 3 48 54114.30.mm x 114.30 mm76344 3 2.64 3 48 5476348 4 1.51 3 48 5476360 26 2.64 3 48 5476364 26D 2.07 3 48 544-1/2x4-1/2 76357 10B NRP 3.09 3 48 5476369 P NRP 1.73 3 48 54114.30.mm x 114.30 mm76345 3 NRP 3.09 3 48 5476349 4 NRP 1.96 3 48 5476361 26 NRP 3.09 3 48 5476365 26D NRP 2.53 3 48 54These hinges are not subject to any other discountsPrice Code 57FM62

FM63FULL MORTISE HINGESSTEEL STANDARD WEIGHT FIVE KNUCKLEJune 15, 2011PRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTMPB79 4-1/2x4 76336 P 2.53 3 48 51114.30.mm x 114.30 mm76342 3 3.43 3 48 5176346 4 3.09 3 48 5176354 10B 1.28 3 48 5176358 26 3.43 3 48 5176363 26D 3.55 3 48 514-1/2x4 76367 P NRP 2.98 3 48 51114.30.mm x 101.60 mm76343 3 NRP 3.88 3 48 5176347 4 NRP 3.55 3 48 5176355 10B NRP 1.28 3 48 5176359 26 NRP 3.88 3 48 5176362 26D NRP 3.09 3 48 514-1/2x4-1/2 76336 P 2.53 3 48 55114.30.mm x 114.30 mm76312 3 3.55 3 48 5576316 4 3.09 3 48 5576324 10B 1.28 3 48 5576328 26 3.55 3 48 5576332 26D 3.09 3 48 554-1/2x4-1/2 76337 P NRP 2.98 3 48 55114.30.mm x 114.30 mm76313 3 NRP 4.00 3 48 5576317 4 NRP 3.55 3 48 5576325 10B NRP 1.28 3 48 5576329 26 NRP 4.00 3 48 5576333 26D NRP 3.55 3 48 55STEEL HEAVY WEIGHT FIVE KNUCKLE BEARINGPRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTMPB68 4-1/2x4 1/2 76374 26D 7.63 3 24 35114.30 mm x 114.30 mm76375 26D NRP 8.08 3 24 35NON-FERROUS STANDARD WEIGHT FIVE KNUCKLE BEARINGPRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTMPB91 4-1/2x4 1/2 76340 32D 9.55 3 48 33114.30 mm x 114.30 mm76341 32D NRP 10.01 3 48 33NON-FERROUS HEAVY WEIGHT FIVE KNUCKLE BEARINGPRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QTY. QTY. WEIGHTMPB99 4-1/2x4 1/2 76376 32D 16.12 3 24 37114.30 mm x 114.30 mm76377 32D NRP 16.58 3 24 37These hinges are not subject to any other discountsPrice Code 57FM631.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

EL-1ELECTRIC HINGESCC-4June 15, 2011PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2314- CC4 4-1/2x4 71218 3 220.59 1114.30x101.60 mm71219 4 210.46 171220 10B 220.59 171221 26 220.59 171222 26D 217.76 171179 32D 256.04 14-1/2x4-1/2 71223 3 220.59 1114.30x114.30 mm59817 4 210.46 171139 10B 220.59 171224 26 220.59 171142 26D 217.76 156183 32D 256.04 1TA2714 - CC4 4-1/2x4 55664 P 185.28 1114.30x101.60 mm71225 AP 185.28 171226 3 191.48 171227 4 185.28 171257 10 185.28 171228 10A 191.48 155668 10B 191.48 155666 26 191.48 155669 26D 169.84 171229 CP 185.28 171230 D3 185.28 171231 D4 185.28 14-1/2x4-1/2 55888 P 162.81 1114.30x114.30 mm71250 AP 185.28 171128 3 146.00 155902 4 185.28 171110 10 169.98 171252 10A 169.98 155886 10B 191.48 155887 26 168.25 155885 26D 142.42 171253 CP 185.28 171254 D3 185.28 171255 D4 185.28 1T4A3386 - CC4 4-1/2x4-1/2 71260 3 233.85 1114.30x114.30 mm71261 4 223.71 171262 10B 233.85 171263 26 233.85 171106 26D 230.92 171167 32D 297.05 1Price Code 59EL-11.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

EL-2ELECTRIC HINGESCC-4June 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYT4A3386 - CC4 5x4-1/2 71265 26D 235.39 1127x114.30 mm71210 32D 301.53 1T4A3786 - CC4 4-1/2x4-1/2 71378 P 208.09 1114.30x114.30 mm71269 AP 215.21 171270 3 219.17 171271 4 219.17 171272 10 215.21 171273 10A 219.17 171274 10B 219.17 171275 26 219.17 171118 26D 159.95 171276 CP 215.21 171277 D3 215.21 171278 D4 215.21 1SWING CLEAR HINGESEL-25x4-1/2 71280 P 211.09 1127x114.30 mm71136 26D 170.46 1PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2895 4-1/2 73650 26D 257.03 1TA4895114.30 mm73657 26D 257.03 1T4A3795 73664 26D 272.44 1T4A4795 73671 26D 272.44 1T4A3795 5 73678 26D 272.44 1T4A4795127mm73685 26D 272.44 1Price Code 59

EL-3ELECTRIC HINGESCC-6June 15, 2011PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2314- CC6 4-1/2x4 71285 3 240.07 1114.30x101.60 mm71286 4 229.94 171287 10B 240.07 171288 26 240.07 171289 26D 237.25 171163 32D 275.51 14-1/2x4-1/2 71292 3 240.07 1114.30x114.30 mm71293 4 229.94 171294 10B 240.07 171295 26 240.07 171296 26D 237.25 171159 32D 275.51 1TA2714 - CC6 4-1/2x4 71300 P 204.06 1114.30x101.60 mm71301 AP 204.06 171302 3 210.24 171303 4 204.06 171304 10 204.06 171305 10A 210.24 171306 10B 210.24 171307 26 210.24 171308 26D 205.56 171309 CP 204.06 171310 D3 204.06 171311 D4 204.06 14-1/2x4-1/2 71205 P 204.06 1114.30x114.30 mm71314 AP 204.06 171200 3 210.24 171201 4 204.06 171202 10 204.06 171313 10A 210.24 171203 10B 210.24 171204 26 210.24 171120 26D 156.73 171315 CP 204.06 171316 D3 204.06 171317 D4 204.06 1T4A3386 - CC6 4-1/2x4-1/2 71320 3 253.31 1114.30x114.30 mm71321 4 243.19 171322 10B 253.31 171323 26 253.31 171174 26D 249.43 171208 32D 363.27 1Price Code 59EL-31.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

EL-4ELECTRIC HINGESCC-6June 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYT4A3386 - CC6 5x4-1/2 71326 26D 254.88 1127x114.30 mm71211 32D 321.00 1T4A3786 - CC6 4-1/2x4-1/2 71330 P 226.85 1114.30x114.30 mm71331 AP 233.98 171332 3 237.92 171333 4 233.98 171334 10 233.98 171335 10A 237.92 171336 10B 237.92 171337 26 237.92 171173 26D 228.15 171338 CP 233.98 171339 D3 233.98 171340 D4 233.98 15x4-1/2 71342 P 229.86 1127x114.30 mm71343 26D 232.16 1SWING CLEAR HINGESPRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2895 4-1/2 73651 26D 265.57 1TA4895114.30 mm73658 26D 265.53 1T4A3795 73665 26D 280.94 1T4A4795 73672 26D 280.94 1T4A3795 5 73679 26D 280.94 1T4A4795127mm73686 26D 280.94 1Price Code 59EL-4

EL-5ELECTRIC HINGESCC-8June 15, 2011PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2314- CC8 4-1/2x4 71450 3 255.64 1114.30x101.60 mm71451 4 245.52 171452 10B 255.64 171453 26 255.64 171454 26D 252.83 171165 32D 291.09 14-1/2x4-1/2 71456 3 255.64 171457 4 245.52 171458 10B 255.64 171459 26 255.64 156184 26D 252.83 171161 32D 304.73 1TA2714 - CC8 4-1/2x4 71461 P 219.06 1114.30x101.60 mm71462 AP 219.06 171463 3 225.26 171464 4 219.06 171465 10 219.06 171466 10A 225.26 171467 10B 225.26 171468 26 225.26 171469 26D 168.46 171470 CP 219.06 171471 D3 219.06 171472 D4 219.06 14-1/2x4-1/2 55906 P 219.06 171474 AP 219.06 171475 3 225.26 171476 4 192.49 171477 10 219.06 171478 10A 225.26 171479 10B 225.26 171480 26 225.26 155904 26D 168.46 171481 CP 219.06 171482 D3 219.06 171483 D4 219.06 1T4A3386 - CC8 4-1/2x4-1/2 71485 3 270.46 1114.30x114.30 mm71486 4 260.42 171487 10B 270.46 171488 26 270.46 171168 26D 266.66 171169 32D 345.73 1Price Code 59EL-51.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

EL-6ELECTRIC HINGESCC-8June 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYT4A3386 - CC8 5x4-1/2 71490 26D 270.46 1127x114.30 mm71212 32D 360.35 1T4A3786 - CC8 4-1/2x4-1/2 71492 P 243.36 1114.30x114.30 mm71493 AP 250.49 171494 3 254.44 171495 4 250.49 171496 10 250.49 171497 10A 239.75 171498 10B 254.44 171499 26 254.44 171166 26D 186.85 171505 CP 250.49 171506 D3 250.49 171507 D4 250.49 1T4A3786 - CC8 5x4-1/2 71508 26D 205.29 1127x114.30 mm71212 32D 360.35 1SWING CLEAR HINGESPRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2895 4-1/2 73652 26D 282.53 1TA4895114.30 mm73659 26D 282.53 1T4A3795 73666 26D 297.95 1T4A4795 73673 26D 297.95 1T4A3795 5 73680 26D 297.95 1T4A4795127mm73687 26D 297.95 1Price Code 59EL-6

EL-7ELECTRIC HINGESQC-2June 15, 2011PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2314- QC2 4-1/2x4 73100 3 210.86 1114.30x101.60 mm73101 4 200.73 173102 10B 210.86 173103 26 210.86 173104 26D 208.03 173105 32D 246.31 14-1/2x4-1/2 73106 3 210.86 1114.30x114.30 mm73107 4 200.73 173108 10B 210.86 173109 26 210.86 173110 26D 217.27 173111 32D 246.31 1TA2714 - QC2 4-1/2x4 73112 P 175.91 1114.30x101.60 mm73113 AP 175.91 173114 3 182.10 173115 4 175.91 173116 10 175.91 173117 10A 182.10 173118 10B 182.10 173119 26 182.10 173120 26D 177.41 173121 CP 175.91 173122 D3 175.91 173123 D4 175.91 14-1/2x4-1/2 73124 P 185.48 1114.30x114.30 mm73125 AP 175.91 173126 3 182.10 173127 4 175.91 173128 10 175.91 173129 10A 182.10 173130 10B 182.10 173131 26 182.10 173132 26D 177.41 173133 CP 175.91 173134 D3 175.91 173135 D4 175.91 1T4A3386 - QC2 4-1/2x4-1/2 73136 3 224.09 1114.30x114.30 mm73137 4 213.97 173138 10B 224.09 173139 26 224.09 173140 26D 221.17 173141 32D 287.31 1Electric Hinges are packed 1 each per boxPrice Code 59EL-71.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

EL-8ELECTRIC HINGESQC-2June 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHT4A3386 - QC2 5x4-1/2 73142 26D 225.66 1127x114.30 mm73143 32D 291.78 1T4A3786 - QC2 4-1/2x4-1/2 73144 P 198.70 1114.30x114.30 mm73145 AP 205.83 173146 3 209.77 173147 4 205.83 173148 10 205.83 173149 10A 209.77 173150 10B 209.77 173151 26 209.77 173152 26D 200.39 173153 CP 205.83 173154 D3 205.83 173155 D4 205.83 15x4-1/2 73156 P 201.71 1127x114.30 mm73157 26D 204.02 1Electric Hinges are packed 1 each per boxSWING CLEAR HINGESPrice Code 59EL-8PRICEEACHBOXQUANTITYPRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2895 4-1/2 73653 26D 248.45 1TA4895114.30 mm73660 26D 248.45 1T4A3795 73667 26D 263.84 1T4A4795 73674 26D 263.84 1T4A3795 5 73681 26D 263.84 1T4A4795127mm73688 26D 263.84 1

EL-9ELECTRIC HINGESQC-4June 15, 2011PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2314- QC4 4-1/2x4 73160 3 240.07 1114.30x101.60 mm73161 4 229.94 173162 10B 240.07 173163 26 240.07 173164 26D 237.25 173165 32D 275.51 14-1/2x4-1/2 73166 3 240.07 1114.30x114.30 mm73167 4 229.94 173168 10B 240.07 173169 26 240.07 173170 26D 237.25 173171 32D 275.51 1TA2714 - QC4 4-1/2x4 73172 P 204.06 1114.30x101.60 mm73173 AP 204.06 173174 3 210.24 173175 4 204.06 173176 10 204.06 173177 10A 210.24 173178 10B 210.24 173179 26 210.24 173180 26D 205.56 173181 CP 204.06 173182 D3 204.06 173183 D4 204.06 14-1/2x4-1/2 73184 P 204.06 1114.30x114.30 mm73185 AP 204.06 173186 3 210.24 173187 4 204.06 173188 10 204.06 173189 10A 210.24 173190 10B 210.24 173191 26 210.24 173192 26D 156.73 173193 CP 204.06 173194 D3 204.06 173195 D4 204.06 1T4A3386 - QC4 4-1/2x4-1/2 73200 3 253.31 1114.30x114.30 mm73201 4 308.73 173202 10B 253.31 173203 26 253.31 173204 26D 249.41 173205 32D 316.51 1Electric Hinges are packed 1 each per boxPrice Code 59EL-91.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

EL-10ELECTRIC HINGESQC-4June 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYT4A3386 - QC4 5x4-1/2 73206 26D 254.88 1127x114.30 mm73207 32D 321.00 1T4A3786 - QC4 4-1/2x4-1/2 73208 P 226.85 1114.30x114.30 mm73209 AP 233.98 173210 3 237.92 173211 4 218.73 173212 10 233.98 173213 10A 237.92 173214 10B 237.92 173215 26 237.92 173216 26D 198.31 173217 CP 233.98 173218 D3 233.98 173219 D4 233.98 15x4-1/2 73220 P 229.86 1127x114.30 mm73221 26D 222.77 1Electric Hinges are packed 1 each per boxSWING CLEAR HINGESPRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2895 4-1/2 73654 26D 274.06 1TA4895114.30 mm73661 26D 274.06 1T4A3795 73668 26D 289.46 1T4A4795 73675 26D 289.46 1T4A3795 5 73682 26D 289.46 1T4A4795127mm73689 26D 289.46 1Price Code 59EL-10

EL-11ELECTRIC HINGESQC-6June 15, 2011PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2314- QC6 4-1/2x4 73222 3 259.55 1114.30x101.60 mm73223 4 249.43 173224 10B 259.55 173225 26 259.55 173226 26D 256.73 173227 32D 295.00 14-1/2x4-1/2 73228 3 259.55 1114.30x114.30 mm73229 4 249.43 173230 10B 259.55 173231 26 259.55 173232 26D 256.73 173233 32D 295.00 1TA2714 - QC6 4-1/2x4 73234 P 222.81 1114.30x101.60 mm73235 AP 222.81 173236 3 229.01 173237 4 222.81 173238 10 222.81 173239 10A 229.01 173240 10B 229.01 173241 26 229.01 173242 26D 224.31 173243 CP 222.81 173244 D3 222.81 13245 D4 222.81 14-1/2x4-1/2 73246 P 222.81 1114.30x114.30 mm73247 AP 222.81 173248 3 229.01 173249 4 222.81 173250 10 222.81 173251 10A 229.01 173252 10B 229.01 173253 26 229.01 173254 26D 194.66 173255 CP 222.81 173256 D3 222.81 173257 D4 222.81 1T4A3386 - QC6 4-1/2x4-1/2 73258 3 272.79 1114.30x114.30 mm73259 4 262.66 173260 10B 272.79 173261 26 272.79 173262 26D 268.89 173263 32D 336.00 1Electric Hinges are packed 1 each per boxPrice Code 59EL-111.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

EL-12ELECTRIC HINGESQC-6June 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYT4A3386 - QC6 5x4-1/2 73264 26D 291.70 1127x114.30 mm73265 32D 340.47 1T4A3786 - QC6 4-1/2x4-1/2 73266 P 245.62 1114.30x114.30 mm73267 AP 252.74 173268 3 256.68 173269 4 252.74 173270 10 252.74 173271 10A 256.68 173272 10B 256.68 173273 26 256.68 173274 26D 214.27 173275 CP 252.74 173276 D3 252.74 173277 D4 252.74 15x4-1/2 73278 26D 248.62 1127x114.30 mm73323 32D 379.83 1Electric Hinges are packed 1 each per boxSWING CLEAR HINGESPRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2895 4-1/2 73655 26D 282.62 1TA4895114.30 mm73662 26D 282.62 1T4A3795 73669 26D 298.01 1T4A4795 73676 26D 298.01 1T4A3795 5 73683 26D 298.01 1T4A4795127mm73690 26D 298.01 1Price Code 59EL-12

EL-13ELECTRIC HINGESQC-8June 15, 2011PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2314- QC8 4-1/2x4 73280 3 275.13 1114.30x101.60 mm73281 4 265.00 173282 10B 275.13 173283 26 275.13 173284 26D 272.31 173285 32D 310.58 14-1/2x4-1/2 73286 3 275.13 1114.30x114.30 mm73287 4 265.00 173288 10B 275.13 173289 26 275.13 173290 26D 272.31 173291 32D 324.22 1TA2714 - QC8 4-1/2x4 73292 P 237.83 1114.30x101.60 mm73293 AP 237.83 173294 3 240.26 173295 4 237.83 173296 10 237.83 173297 10A 244.02 173298 10B 244.02 173299 26 244.02 173300 26D 239.70 173301 CP 237.83 173302 D3 237.83 173303 D4 237.83 14-1/2x4-1/2 73304 P 237.83 1114.30x114.30 mm73305 AP 237.83 173306 3 244.02 173307 4 237.83 173308 10 237.83 173309 10A 244.02 173310 10B 244.02 173311 26 244.02 173312 26D 208.01 173313 CP 237.83 173314 D3 237.83 173315 D4 237.83 1T4A3386 - QC8 4-1/2x4-1/2 73316 3 289.93 1114.30x114.30 mm73317 4 279.90 173318 10B 289.93 173319 26 289.93 173320 26D 286.13 173321 32D 365.21 1Electric Hinges are packed 1 each per boxPrice Code 59EL-131.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

EL-14ELECTRIC HINGESQC-8June 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYT4A3386 - QC8 5x4-1/2 73322 26D 289.93 1127x114.30 mm73323 32D 379.83 1T4A3786 - QC8 4-1/2x4-1/2 73324 P 262.13 1114.30x114.30 mm73325 AP 269.25 173326 3 273.19 173327 4 250.49 173328 10 269.25 173329 10A 273.19 173330 10B 273.19 173331 26 273.19 173332 26D 210.93 173333 CP 269.25 173334 D3 269.25 173335 D4 269.25 15x4-1/2 73336 26D 267.48 1127x114.30 mm73337 P 272.82 1Electric Hinges are packed 1 each per boxSWING CLEAR HINGESPRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2895 4-1/2 73656 26D 299.63 1TA4895114.30 mm73663 26D 299.63 1T4A3795 73670 26D 315.03 1T4A4795 73677 26D 315.03 1T4A3795 5 73684 26D 315.03 1T4A4795127mm73691 26D 315.03 1Price Code 59EL-14

EL-15ELECTRIC HINGESQC-10June 15, 2011PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2314- QC10 4-1/2x4 73900 3 304.34 1114.30x101.60 mm73901 4 294.21 173902 10B 304.34 173903 26 304.34 173904 26D 301.53 173905 32D 339.80 14-1/2x4-1/2 73906 3 304.34 1114.30x114.30 mm73907 4 294.21 173908 10B 304.34 173909 26 304.34 173910 26D 301.53 173911 32D 339.80 1TA2714- QC10 4-1/2x4 73912 P 265.98 1114.30x101.60 mm73913 AP 265.98 173914 3 272.16 173915 4 265.98 173916 10 265.98 173917 10A 272.16 173918 10B 272.16 173919 26 272.16 173920 26D 267.84 173921 CP 265.98 173922 D3 265.98 173923 D4 265.98 14-1/2x4-1/2 73924 P 265.98 1114.30x114.30 mm73925 AP 265.98 173926 3 272.16 173927 4 265.98 173928 10 265.98 173929 10A 272.16 173930 10B 272.16 173931 26 272.16 173932 26D 267.84 173933 CP 265.98 173934 D3 265.98 173935 D4 265.98 1T4A3386- QC10 4-1/2x4-1/2 73936 3 319.15 1114.30x114.30 mm73937 4 309.11 173938 10B 319.15 173939 26 319.15 173940 26D 313.59 173941 32D 394.43 1Electric Hinges are packed 1 each per boxPrice Code 59EL-151.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

EL-16ELECTRIC HINGESQC-10June 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICEBOXEACH QUANTITYT4A3386 - QC10 5x4-1/2 73942 26D 319.15 1127x114.30 mm73343 32D 369.01 1T4A3786 - QC10 4-1/2x4-1/2 73344 P 333.56 1114.30x114.30 mm73345 AP 323.43 173346 3 333.56 173347 4 333.56 173348 10 330.74 173349 10A 382.65 173350 10B 294.13 173351 26 294.13 173352 26D 300.31 173353 CP 294.13 173354 D3 294.13 173355 D4 300.31 15x4-1/2 73956 P 300.31 1127x114.30 mm73957 26D 300.30 1Electric Hinges are packed 1 each per boxPrice Code 59EL-16

EL-17ELECTRIC HINGESQC-12June 15, 2011PRODUCT SIZE PART # FINISHPRICE BOXEACH QUANTITYTA2314- QC12 4-1/2x4 73338 3 333.56 1114.30x101.60 mm73339 4 323.43 173340 10B 333.56 173341 26 333.56 173342 26D 330.74 173343 32D 369.01 14-1/2x4-1/2 73344 3 333.56 1114.30x114.30 mm73345 4 323.43 173346 10B 333.56 173347 26 333.56 173348 26D 330.74 173349 32D 382.65 1TA2714 - QC12 4-1/2x4 73350 P 294.13 1114.30x101.60 mm73351 AP 294.13 173352 3 300.31 173353 4 294.13 173354 10 294.13 173355 10A 300.31 173356 10B 300.31 173357 26 300.30 173358 26D 296.00 173359 CP 294.13 173360 D3 294.13 173361 D4 294.13 14-1/2x4-1/2 73362 P 294.13 1114.30x114.30 mm73363 AP 294.13 173364 3 300.31 173365 4 312.88 173366 10 271.04 173367 10A 300.31 173368 10B 300.31 173369 26 300.31 173370 26D 237.37 173371 CP 294.13 173372 D3 294.13 173373 D4 294.13 1T4A3386 - QC12 4-1/2x4-1/2 73374 3 348.37 1114.30x114.30 mm73375 4 338.33 173376 10B 348.37 173377 26 348.37 173378 26D 344.57 173379 32D 423.65 1Electric Hinges are packed 1 each per boxPrice Code 59EL-171.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

EL-16ELECTRIC HINGESQC-10June 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICEEACHBOXQUANTITYT4A3386 - QC12 5x4-1/2 73380 26D 348.37 1127x114.30 mm73381 32D 438.25 1T4A3786 - QC12 4-1/2x4-1/2 73382 P 318.41 1114.30x114.30 mm73383 AP 325.55 173384 3 329.49 173385 4 325.55 173386 10 325.55 173387 10A 329.49 173388 10B 329.49 173389 26 329.49 173390 26D 320.09 173391 CP 325.55 173392 D3 325.55 173393 D4 325.55 15x4-1/2 73395 P 336.09 1127x114.30 mm73394 26D 329.37 1Electric Hinges are packed 1 each per boxPrice Code 59McKINNEY Products Company • 225 Episcopal Road • Berlin • CT 06037 • Phone: 800.346.7707 • Fax: 800.541.1073ASSA ABLOY Door Security Solutions Canada • 160 Four Valley Drive • Vaughan, Ontario • L4K 4T9 • Tel: 800.461.3007 • Fax: 905.738.2478 • www.assaabloy.caEL-18

FMA-1FULL MORTISE ANCHOR HINGE SETSNON-FERROUS BEARINGJune 15, 2011PRODUCT SIZE PART # FINISH PRICETA391 5" x 4 1 ⁄2"127 mm x 114.30 mmCASE BOX CASEQTY. QTY. WEIGHTR.H. 76168 P 347.50 SET 4 SETS 1 SET 28L.H. 76169 P 347.50 SET 4 SETS 1 SET 28R.H. 76170 AP 347.50 SET 4 SETS 1 SET 28L.H. 76171 AP 347.50 SET 4 SETS 1 SET 28R.H. 76172 3 414.20 SET 4 SETS 1 SET 28L.H. 76173 3 414.20 SET 4 SETS 1 SET 28Anchor plate for R.H. 76174 4 347.50 SET 4 SETS 1 SET 28door header only. L.H. 76175 4 347.50 SET 4 SETS 1 SET 28Permits use of R.H. 76176 10 347.50 SET 4 SETS 1 SET 28holders, closers L.H. 76177 10 347.50 SET 4 SETS 1 SET 28concealed in R.H. 76178 10A 414.20 SET 4 SETS 1 SET 28top of jamb. L.H. 76179 10A 414.20 SET 4 SETS 1 SET 28R.H. 76180 10B 414.20 SET 4 SETS 1 SET 28L.H. 76181 10B 414.20 SET 4 SETS 1 SET 28R.H. 76182 26 414.20 SET 4 SETS 1 SET 28L.H. 76183 26 414.20 SET 4 SETS 1 SET 28R.H. 76184 26D 356.94 SET 4 SETS 1 SET 28L.H. 76185 26D 356.94 SET 4 SETS 1 SET 28R.H. 76186 32 453.15 SET 4 SETS 1 SET 28L.H. 76187 32 453.15 SET 4 SETS 1 SET 28R.H. 76188 32D 439.52 SET 4 SETS 1 SET 28L.H. 76189 32D 439.52 SET 4 SETS 1 SET 28Set consists of top anchor, intermediate and bottom hinge for square edge door application.Price Code 30FMA-11.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FMA-2FULL MORTISE ANCHOR HINGE SETSNON-FERROUS BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISH PRICETA392 5" x 4 1 ⁄2"127 mm x 114.30 mmCASE BOX CASEQTY. QTY. WEIGHTR.H. 75502 P 347.50 SET 4 SETS 1 SET 28L.H. 75503 P 347.50 SET 4 SETS 1 SET 28R.H. 75504 AP 347.50 SET 4 SETS 1 SET 28L.H. 75505 AP 347.50 SET 4 SETS 1 SET 28R.H. 75518 3 414.20 SET 4 SETS 1 SET 28Anchor plate for L.H. 75519 3 414.20 SET 4 SETS 1 SET 28jamb and door R.H. 75520 4 347.50 SET 4 SETS 1 SET 28header permits L.H. 75521 4 347.50 SET 4 SETS 1 SET 28use of surface R.H. 75498 10 347.50 SET 4 SETS 1 SET 28applied holders L.H. 75499 10 347.50 SET 4 SETS 1 SET 28and closers. R.H. 75522 10A 414.20 SET 4 SETS 1 SET 28L.H. 75523 10A 414.20 SET 4 SETS 1 SET 28R.H. 75524 10B 414.20 SET 4 SETS 1 SET 28L.H. 75525 10B 414.20 SET 4 SETS 1 SET 28R.H. 75526 26 414.20 SET 4 SETS 1 SET 28L.H. 75527 26 414.20 SET 4 SETS 1 SET 28R.H. 75496 26D 356.94 SET 4 SETS 1 SET 28L.H. 75497 26D 356.94 SET 4 SETS 1 SET 28R.H. 75528 32 453.15 SET 4 SETS 1 SET 28L.H. 75529 32 453.15 SET 4 SETS 1 SET 28R.H. 75500 32D 399.57 SET 4 SETS 1 SET 28L.H. 75501 32D 399.57 SET 4 SETS 1 SET 28Set consists of top anchor, intermediate and bottom hinge for square edge door application.Price Code 30FMA-2

FMA-3FULL MORTISE ANCHOR HINGE SETSNON-FERROUS BEARINGJune 15, 2011PRODUCT SIZE PART # FINISH PRICETA393 5" x 4 1 ⁄2"127 mm x 114.30 mmCASE BOX CASEQTY. QTY. WEIGHTR.H. 75565 P 347.50 SET 4 SETS 1 SET 28L.H. 75566 P 347.50 SET 4 SETS 1 SET 28R.H. 75567 AP 347.50 SET 4 SETS 1 SET 28L.H. 75568 AP 347.50 SET 4 SETS 1 SET 28R.H. 75569 3 414.20 SET 4 SETS 1 SET 28Anchor plate for L.H. 75570 3 414.20 SET 4 SETS 1 SET 28jamb header only, R.H. 75571 4 347.50 SET 4 SETS 1 SET 28permits the use L.H. 75572 4 347.50 SET 4 SETS 1 SET 28of holders and R.H. 75514 10 347.50 SET 4 SETS 1 SET 28closers concealed in L.H. 75515 10 347.50 SET 4 SETS 1 SET 28the top of the door. R.H. 75573 10A 414.20 SET 4 SETS 1 SET 28L.H. 75574 10A 414.20 SET 4 SETS 1 SET 28R.H. 75575 10B 414.20 SET 4 SETS 1 SET 28L.H. 75576 10B 414.20 SET 4 SETS 1 SET 28R.H. 75577 26 414.20 SET 4 SETS 1 SET 28L.H. 75578 26 414.20 SET 4 SETS 1 SET 28R.H. 75512 26D 356.94 SET 4 SETS 1 SET 28L.H. 75513 26D 356.94 SET 4 SETS 1 SET 28R.H. 75579 32 453.15 SET 4 SETS 1 SET 28L.H. 75580 32 453.15 SET 4 SETS 1 SET 28R.H. 75581 32D 399.57 SET 4 SETS 1 SET 28L.H. 75582 32D 399.57 SET 4 SETS 1 SET 28Set consists of top anchor, intermediate and bottom hinge for square edge door application.Price Code 30FMA-31.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FMA-4FULL MORTISE ANCHOR HINGE SETSNON-FERROUS BEARING HINGES4” DOOR LEGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISH PRICETA3944" DOOR LEG101.60 mmCASE BOX CASEQTY. QTY. WEIGHTR.H. 75435 P 358.50 SET 4 SETS 1 SET 28L.H. 75436 P 358.50 SET 4 SETS 1 SET 28R.H. 75437 AP 358.50 SET 4 SETS 1 SET 28L.H. 75438 AP 358.50 SET 4 SETS 1 SET 28R.H. 75439 3 425.40 SET 4 SETS 1 SET 28L.H. 75440 3 425.40 SET 4 SETS 1 SET 28Anchor plate for R.H. 75441 4 358.50 SET 4 SETS 1 SET 28both jamb and door L.H. 75442 4 358.50 SET 4 SETS 1 SET 28header, permits use R.H. 75443 10 358.50 SET 4 SETS 1 SET 28of surface applied L.H. 75444 10 358.50 SET 4 SETS 1 SET 28holders and closers. R.H. 75445 10A 425.40 SET 4 SETS 1 SET 28L.H. 75446 10A 425.40 SET 4 SETS 1 SET 28R.H. 75447 10B 425.40 SET 4 SETS 1 SET 28L.H. 75448 10B 425.40 SET 4 SETS 1 SET 28R.H. 75449 26 425.40 SET 4 SETS 1 SET 28L.H. 75450 26 425.40 SET 4 SETS 1 SET 28R.H. 75451 26D 357.14 SET 4 SETS 1 SET 28L.H. 75452 26D 357.14 SET 4 SETS 1 SET 28R.H. 75453 32 453.15 SET 4 SETS 1 SET 28L.H. 75454 32 453.15 SET 4 SETS 1 SET 28R.H. 75455 32D 440.20 SET 4 SETS 1 SET 28L.H. 75456 32D 440.20 SET 4 SETS 1 SET 28Set consists of top anchor, intermediate and bottom hinge for square edge door application.Price Code 30FMA-4

FMA-5FULL MORTISE ANCHOR HINGE SETSHEAVY WEIGHT BEVELED EDGEBEARING NON-FERROUSJune 15, 2011PRODUCT SIZE PART # FINISH PRICETA5392 5" x 4 1 ⁄2"127 mm x 114.30 mmCASE BOX CASEQTY. QTY. WEIGHTR.H. 75605 P 347.50 SET 4 SETS 1 SET 28L.H. 75606 P 347.50 SET 4 SETS 1 SET 28R.H. 75607 AP 347.50 SET 4 SETS 1 SET 28L.H. 75608 AP 347.50 SET 4 SETS 1 SET 28R.H. 75609 3 414.20 SET 4 SETS 1 SET 28L.H. 75610 3 414.20 SET 4 SETS 1 SET 28Anchor plate for R.H. 75611 4 414.20 SET 4 SETS 1 SET 28jamb and door L.H. 75612 4 347.50 SET 4 SETS 1 SET 28header permits use R.H. 75613 10 347.50 SET 4 SETS 1 SET 28of surface applied L.H. 75614 10 347.50 SET 4 SETS 1 SET 28holders and closers. R.H. 75615 10A 414.20 SET 4 SETS 1 SET 28L.H. 75616 10A 414.20 SET 4 SETS 1 SET 28R.H. 75617 10B 414.20 SET 4 SETS 1 SET 28L.H. 75618 10B 414.20 SET 4 SETS 1 SET 28R.H. 75619 26 414.20 SET 4 SETS 1 SET 28L.H. 75620 26 414.20 SET 4 SETS 1 SET 28R.H. 75546 26D 356.94 SET 4 SETS 1 SET 28L.H. 75547 26D 356.94 SET 4 SETS 1 SET 28R.H. 75542 32 453.15 SET 4 SETS 1 SET 28L.H. 75543 32 453.17 SET 4 SETS 1 SET 28R.H. 75544 32D 399.57 SET 4 SETS 1 SET 28L.H. 75545 32D 399.57 SET 4 SETS 1 SET 28Set consists of top anchor, intermediate and bottom hinge for beveled (1/8" in 2") edge doors on hinge side application.Price Code 30FMA-51.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FMA-6FULL MORTISE ANCHOR HINGE SETSHEAVY WEIGHT BEVELED EDGENON-FERROUS BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISH PRICETA5393 5" x 4 1 ⁄2"127 mm x 114.30 mmCASE BOX CASEQTY. QTY. WEIGHTR.H. 75550 P 347.50 SET 4 SETS 1 SET 28L.H. 75551 P 347.50 SET 4 SETS 1 SET 28R.H. 75661 AP 347.50 SET 4 SETS 1 SET 28L.H. 75662 AP 347.50 SET 4 SETS 1 SET 28R.H. 75663 3 414.20 SET 4 SETS 1 SET 28L.H. 75664 3 414.20 SET 4 SETS 1 SET 28Anchor plate for R.H. 75665 4 347.50 SET 4 SETS 1 SET 28jamb header only, L.H. 75666 4 347.50 SET 4 SETS 1 SET 28permits the use R.H. 75667 10 347.50 SET 4 SETS 1 SET 28of holders and L.H. 75668 10 347.50 SET 4 SETS 1 SET 28closers concealed in R.H. 75669 10A 414.20 SET 4 SETS 1 SET 28the top of the door. L.H. 75670 10A 414.20 SET 4 SETS 1 SET 28R.H. 75671 10B 414.20 SET 4 SETS 1 SET 28L.H. 75672 10B 414.20 SET 4 SETS 1 SET 28R.H. 75673 26 414.20 SET 4 SETS 1 SET 28L.H. 75674 26 414.20 SET 4 SETS 1 SET 28R.H. 75695 26D 356.94 SET 4 SETS 1 SET 28L.H. 75696 26D 356.94 SET 4 SETS 1 SET 28R.H. 75655 32 453.15 SET 4 SETS 1 SET 28L.H. 75656 32 453.15 SET 4 SETS 1 SET 28R.H. 75657 32D 399.57 SET 4 SETS 1 SET 28L.H. 75658 32D 399.57 SET 4 SETS 1 SET 28Set consists of top anchor, intermediate and bottom hinge for beveled (1/8" in 2") edge doors on hinge side application.FMA-6

FMA-7FULL MORTISE ANCHOR HINGE SETSNON-FERROUS BEARING HINGESFOR BEVELED EDGE DOORS 4” DOOR LEGJune 15, 2011PRODUCT SIZE PART # FINISH PRICECASE BOX CASEQTY. QTY. WEIGHTTA5394 R.H. 75700 P 358.50 SET 4 SETS 1 SET 28L.H. 75701 P 358.50 SET 4 SETS 1 SET 28R.H. 75702 AP 358.50 SET 4 SETS 1 SET 28L.H. 75703 AP 358.50 SET 4 SETS 1 SET 28R.H. 75704 3 425.40 SET 4 SETS 1 SET 28L.H. 75705 3 425.40 SET 4 SETS 1 SET 28R.H. 75706 4 358.50 SET 4 SETS 1 SET 28L.H. 75707 4 358.50 SET 4 SETS 1 SET 28Anchor plate for R.H. 75708 10 358.50 SET 4 SETS 1 SET 28both jamb and door L.H. 75709 10 358.50 SET 4 SETS 1 SET 28header, permits use R.H. 75729 10A 425.40 SET 4 SETS 1 SET 28of surface applied L.H. 75730 10A 425.40 SET 4 SETS 1 SET 28holders and closers. R.H. 75731 10B 425.40 SET 4 SETS 1 SET 28L.H. 75732 10B 425.40 SET 4 SETS 1 SET 28R.H. 75733 26 425.40 SET 4 SETS 1 SET 28L.H. 75734 26 425.40 SET 4 SETS 1 SET 28R.H. 75735 26D 357.14 SET 4 SETS 1 SET 28L.H. 75736 26D 357.14 SET 4 SETS 1 SET 28R.H. 75737 32 453.15 SET 4 SETS 1 SET 28L.H. 75738 32 453.15 SET 4 SETS 1 SET 28R.H. 75739 32D 440.20 SET 4 SETS 1 SET 28L.H. 75740 32D 440.20 SET 4 SETS 1 SET 28Set consists of top anchor, intermediate and bottom hinge for beveled (1/8" in 2") edge doors on hinge side application.Price Code 30FMA-71.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FMA-8FULL MORTISE ANCHOR HINGE SETSSTEEL ANCHOR HINGE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISH PRICETA791 5" x 4 1 ⁄2"127 mm x 114.30 mmCASE BOX CASEQTY. QTY. WEIGHTR.H. 76150 P 219.90 SET 4 SETS 1 SET 28L.H. 76151 P 219.90 SET 4 SETS 1 SET 28R.H. 76152 AP 252.56 SET 4 SETS 1 SET 28L.H. 76153 AP 252.56 SET 4 SETS 1 SET 28R.H. 76154 3 324.69 SET 4 SETS 1 SET 28L.H. 76155 3 324.69 SET 4 SETS 1 SET 28Anchor plate for R.H. 76156 4 252.56 SET 4 SETS 1 SET 28door header only. L.H. 76157 4 252.56 SET 4 SETS 1 SET 28Permits use of R.H. 76158 10 252.56 SET 4 SETS 1 SET 28holders, closers L.H. 76159 10 252.56 SET 4 SETS 1 SET 28concealed in R.H. 76160 10A 324.69 SET 4 SETS 1 SET 28top of jamb. L.H. 76161 10A 324.69 SET 4 SETS 1 SET 28R.H. 76162 10B 324.69 SET 4 SETS 1 SET 28L.H. 76163 10B 324.69 SET 4 SETS 1 SET 28R.H. 76164 26 324.69 SET 4 SETS 1 SET 28L.H. 76165 26 324.69 SET 4 SETS 1 SET 28R.H. 76166 26D 252.56 SET 4 SETS 1 SET 28L.H. 76167 26D 252.56 SET 4 SETS 1 SET 28Set consists of top anchor, intermediate and bottom hinge for square edge door application.Price Code 30FMA-8

FMA-9FULL MORTISE ANCHOR HINGE SETSSTEEL ANCHOR HINGE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISH PRICETA792 5" x 4 1 ⁄2"127 mm x 114.30 mmCASE BOX CASEQTY. QTY. WEIGHTR.H. 75490 P 219.90 SET 4 SETS 1 SET 28L.H. 75491 P 219.90 SET 4 SETS 1 SET 28R.H. 75478 AP 252.56 SET 4 SETS 1 SET 28L.H. 75479 AP 252.56 SET 4 SETS 1 SET 28R.H. 75480 3 324.69 SET 4 SETS 1 SET 28Anchor plate for L.H. 75481 3 324.69 SET 4 SETS 1 SET 28jamb and door R.H. 75482 4 252.56 SET 4 SETS 1 SET 28header permits use L.H. 75483 4 252.56 SET 4 SETS 1 SET 28of surface applied R.H. 75494 10 252.56 SET 4 SETS 1 SET 28holders and closers. L.H. 75495 10 252.56 SET 4 SETS 1 SET 28R.H. 75484 10A 324.69 SET 4 SETS 1 SET 28L.H. 75485 10A 324.69 SET 4 SETS 1 SET 28R.H. 75486 10B 324.69 SET 4 SETS 1 SET 28L.H. 75487 10B 324.69 SET 4 SETS 1 SET 28R.H. 75488 26 324.69 SET 4 SETS 1 SET 28L.H. 75489 26 324.69 SET 4 SETS 1 SET 28R.H. 75492 26D 229.59 SET 4 SETS 1 SET 28L.H. 75493 26D 229.59 SET 4 SETS 1 SET 28Set consists of top anchor, intermediate and bottom hinge for square edge door application.Price Code 30FMA-91.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FMA-10FULL MORTISE ANCHOR HINGE SETSSTEEL ANCHOR HINGE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISH PRICETA793 5" x 4 1 ⁄2"127 mm x 114.30 mmCASE BOX CASEQTY. QTY. WEIGHTR.H. 75585 P 219.90 SET 4 SETS 1 SET 28L.H. 75586 P 219.90 SET 4 SETS 1 SET 28R.H. 75587 AP 252.56 SET 4 SETS 1 SET 28L.H. 75588 AP 252.56 SET 4 SETS 1 SET 28R.H. 75589 3 324.69 SET 4 SETS 1 SET 28Anchor plate for L.H. 75590 3 324.69 SET 4 SETS 1 SET 28jamb header only, R.H. 75591 4 252.56 SET 4 SETS 1 SET 28permits the use L.H. 75592 4 252.56 SET 4 SETS 1 SET 28of holders and R.H. 75593 10 252.56 SET 4 SETS 1 SET 28closers concealed in L.H. 75594 10 252.56 SET 4 SETS 1 SET 28the top of the door. R.H. 75595 10A 324.69 SET 4 SETS 1 SET 28L.H. 75596 10A 324.69 SET 4 SETS 1 SET 28R.H. 75597 10B 324.69 SET 4 SETS 1 SET 28L.H. 75598 10B 324.69 SET 4 SETS 1 SET 28R.H. 75599 26 324.69 SET 4 SETS 1 SET 28L.H. 75600 26 324.69 SET 4 SETS 1 SET 28R.H. 75601 26D 252.56 SET 4 SETS 1 SET 28L.H. 75602 26D 252.56 SET 4 SETS 1 SET 28Set consists of top anchor, intermediate and bottom hinge for square edge door application.Price Code 30FMA-10

FMA-11FULL MORTISE ANCHOR HINGE SETSSTEEL ANCHOR HINGE 4” DOOR LEGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA794 R.H. 75820 P 231.45 4 SETS 1 SET 28L.H. 75821 P 231.45 4 SETS 1 SET 28R.H. 75822 AP 263.81 4 SETS 1 SET 28L.H. 75823 AP 263.81 4 SETS 1 SET 28R.H. 75824 3 334.65 4 SETS 1 SET 28L.H. 75825 3 334.65 4 SETS 1 SET 28R.H. 75826 4 263.81 4 SETS 1 SET 28Anchor plate for L.H. 75827 4 263.81 4 SETS 1 SET 28both jamb and door R.H. 75828 10 263.81 4 SETS 1 SET 28header, permits use L.H. 75829 10 263.81 4 SETS 1 SET 28of surface applied R.H. 75830 10A 334.65 4 SETS 1 SET 28holders and closers. L.H. 75831 10A 334.65 4 SETS 1 SET 28R.H. 75832 10B 334.65 4 SETS 1 SET 28L.H. 75833 10B 334.65 4 SETS 1 SET 28R.H. 75834 26 334.65 4 SETS 1 SET 28L.H. 75835 26 334.65 4 SETS 1 SET 28R.H. 75836 26D 263.25 4 SETS 1 SET 28L.H. 75837 26D 263.25 4 SETS 1 SET 28Set consists of top anchor, intermediate and bottom hinge for square edge door application.Price Code 30FMA-111.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FMA-12FULL MORTISE ANCHOR HINGE SETSSTEEL HEAVY WEIGHTBEVELED EDGE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISH PRICETA5792 5" x 4 1 ⁄2"127 mm x 114.30 mmCASE BOX CASEQTY. QTY. WEIGHTR.H. 75530 P 219.90 SET 4 SETS 1 SET 28L.H. 75531 P 219.90 SET 4 SETS 1 SET 28R.H. 75538 AP 252.56 SET 4 SETS 1 SET 28L.H. 75539 AP 252.56 SET 4 SETS 1 SET 28R.H. 75540 3 324.69 SET 4 SETS 1 SET 28Anchor plate for L.H. 75541 3 324.69 SET 4 SETS 1 SET 28jamb and door R.H. 75583 4 252.56 SET 4 SETS 1 SET 28header permits use L.H. 75584 4 252.56 SET 4 SETS 1 SET 28of surface applied R.H. 75534 10 252.56 SET 4 SETS 1 SET 28holders and closers. L.H. 75535 10 252.56 SET 4 SETS 1 SET 28R.H. 75548 10A 324.69 SET 4 SETS 1 SET 28L.H. 75549 10A 324.69 SET 4 SETS 1 SET 28R.H. 75536 10B 324.69 SET 4 SETS 1 SET 28L.H. 75537 10B 324.69 SET 4 SETS 1 SET 28R.H. 75516 26 324.69 SET 4 SETS 1 SET 28L.H. 75517 26 324.69 SET 4 SETS 1 SET 28R.H. 75532 26D 229.59 SET 4 SETS 1 SET 28L.H. 75533 26D 229.59 SET 4 SETS 1 SET 28Set consists of top anchor, intermediate and bottom hinge for beveled (1/8" in 2" ) edge doors on hinge side application.Price Code 30FMA-12

FMA-13FULL MORTISE ANCHOR HINGE SETSSTEEL HEAVY WEIGHTBEVELED EDGE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISH PRICETA5793 5" x 4 1 ⁄2"127 mm x 114.30 mmCASE BOX CASEQTY. QTY. WEIGHTR.H. 75627 P 219.90 SET 4 SETS 1 SET 28L.H. 75628 P 219.90 SET 4 SETS 1 SET 28R.H. 75556 AP 252.56 SET 4 SETS 1 SET 28L.H. 75557 AP 252.56 SET 4 SETS 1 SET 28R.H. 75558 3 324.69 SET 4 SETS 1 SET 28Anchor plate for L.H. 75559 3 324.69 SET 4 SETS 1 SET 28jamb header only, R.H. 75562 4 252.56 SET 4 SETS 1 SET 28permits the use L.H. 75563 4 252.56 SET 4 SETS 1 SET 28of holders and R.H. 75552 10 252.56 SET 4 SETS 1 SET 28closers concealed in L.H. 75553 10 252.56 SET 4 SETS 1 SET 28the top of the door. R.H. 75623 10A 324.69 SET 4 SETS 1 SET 28L.H. 75624 10A 324.69 SET 4 SETS 1 SET 28R.H. 75560 10B 324.69 SET 4 SETS 1 SET 28L.H. 75561 10B 324.69 SET 4 SETS 1 SET 28R.H. 75625 26 324.69 SET 4 SETS 1 SET 28L.H. 75626 26 324.69 SET 4 SETS 1 SET 28R.H. 75554 26D 252.56 SET 4 SETS 1 SET 28L.H. 75555 26D 252.56 SET 4 SETS 1 SET 28Set consists of top anchor, intermediate and bottom hinge for beveled (1/8" in 2") edge doors on hinge side application.Price Code 30FMA-131.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FMA-14FULL MORTISE ANCHOR HINGE SETSSTEEL BEARING HINGES FORBEVELED EDGE DOORS 4” DOOR LEGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA5794 R.H. 75868 P 231.45 4 SETS 1 SET 28L.H. 75869 P 231.45 4 SETS 1 SET 28R.H. 75870 AP 263.81 4 SETS 1 SET 28L.H. 75871 AP 263.81 4 SETS 1 SET 28R.H. 75872 3 334.65 4 SETS 1 SET 28L.H. 75873 3 334.65 4 SETS 1 SET 28R.H. 75874 4 263.81 4 SETS 1 SET 28L.H. 75875 4 263.81 4 SETS 1 SET 28Anchor plate for R.H. 75876 10 263.81 4 SETS 1 SET 28both jamb and door L.H. 75877 10 263.81 4 SETS 1 SET 28header, permits use R.H. 75878 10A 334.65 4 SETS 1 SET 28of surface applied L.H. 75879 10A 334.65 4 SETS 1 SET 28holders and closers. R.H. 75880 10B 334.65 4 SETS 1 SET 28L.H. 75881 10B 334.65 4 SETS 1 SET 28R.H. 75882 26 334.65 4 SETS 1 SET 28L.H. 75883 26 334.65 4 SETS 1 SET 28R.H. 75884 26D 263.25 4 SETS 1 SET 28L.H. 75885 26D 263.25 4 SETS 1 SET 28Set consists of top anchor, intermediate and bottom hinge for beveled (1/8" in 2") edge doors on hinge side application.Price Code 30FMA-14

HM-1HALF MORTISE HINGESTHREE KNUCKLE STANDARD WEIGHTNON-FERROUS BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA374 4 1 ⁄2" 74650 P 127.69 24 3 28114.30 mm74658 AP 127.69 24 3 2874651 3 159.82 24 3 2874652 4 127.69 24 3 2874645 10 127.69 24 3 2874659 10A 159.82 24 3 2874646 10B 159.82 24 3 2874656 26 159.82 24 3 2874657 26D 136.74 24 3 2874643 32D 189.91 24 3 285" 74669 P 152.90 24 3 32127 mm74677 AP 152.90 24 3 3274670 3 192.35 24 3 3274671 4 152.90 24 3 3274664 10 152.90 24 3 3274660 10A 192.35 24 3 3274665 10B 192.35 24 3 3274675 26 192.35 24 3 3274676 26D 169.27 24 3 3274662 32D 223.15 24 3 32Price Code 30HM-11.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

HM-2HALF MORTISE HINGESTHREE KNUCKLE HEAVY WEIGHTNON-FERROUS BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA384 4 1 ⁄2" 74840 P 162.06 24 3 40114.30 mm74848 AP 162.06 24 3 4074841 3 197.89 24 3 4074842 4 162.06 24 3 4074835 10 162.06 24 3 4074849 10A 197.89 24 3 4074836 10B 197.89 24 3 4074846 26 197.89 24 3 4074847 26D 176.58 24 3 4074833 32D 230.14 24 3 405" 74859 P 196.54 24 3 47127 mm74867 AP 196.54 24 3 4774860 3 232.08 24 3 4774861 4 196.54 24 3 4774854 10 196.54 24 3 4774850 10A 232.08 24 3 4774855 10B 232.08 24 3 4774865 26 232.08 24 3 4774866 26D 206.27 24 3 4774852 32D 270.85 24 3 476" 152.4 mm 74878 P 246.98 18 3 63*for 74886 AP 246.98 18 3 631 3 ⁄4" 44.4 mm door 74879 3 297.24 18 3 6374880 4 246.98 18 3 6374873 10 246.98 18 3 6374887 10A 297.24 18 3 6374874 10B 297.24 18 3 6374884 26 297.24 18 3 6374885 26D 258.96 18 3 6374871 32D 340.10 18 3 63Price Code 30HM-2

HM-3HALF MORTISE HINGESSTEEL THREE KNUCKLESTANDARD WEIGHT BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA774 4 1 ⁄2" 74491 P 46.81 24 3 23114.30 mm74492 AP 51.23 24 3 2374496 3 73.46 24 3 2374497 4 51.23 24 3 2374499 10 51.23 24 3 2374507 10A 73.46 24 3 2374500 10B 73.46 24 3 2374503 26 73.46 24 3 2374504 26D 56.75 24 3 235" 74510 P 64.92 24 3 27127 mm74511 AP 78.06 24 3 2774515 3 99.54 24 3 2774516 4 78.06 24 3 2774518 10 81.04 24 3 2774508 10A 99.54 24 3 2774519 10B 103.34 24 3 2774522 26 99.54 24 3 2774523 26D 83.31 24 3 27STEEL THREE KNUCKLE HEAVY WEIGHT BEARINGTA784 4 1 ⁄2" 75142 P 108.73 3 24 36114.30 mm75143 AP 128.63 3 24 3675147 3 149.92 3 24 3675148 4 128.63 3 24 3675150 10 128.63 3 24 3675158 10A 149.92 3 24 3675151 10B 149.92 3 24 3675154 26 149.92 3 24 3675155 26D 133.70 3 24 365" 75161 P 138.75 3 24 44127 mm75162 AP 147.11 3 24 4475166 3 175.25 3 24 4475167 4 147.11 3 24 4475169 10 147.11 3 24 4475177 10A 175.25 3 24 4475170 10B 175.25 3 24 4475173 26 175.25 3 24 4475174 26D 152.26 3 24 446" 152.4 mm 75180 P 169.77 3 18 59*for 75181 AP 178.91 3 18 591 3 ⁄4" 44.4 mm door 75185 3 210.70 3 18 5975186 4 178.91 3 18 5975188 10 178.91 3 18 5975196 10A 210.70 3 18 5975189 10B 210.70 3 18 5975192 26 210.70 3 18 5975193 26D 186.69 3 18 59Price Code 30HM-31.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

HM-4HALF MORTISE HINGESSTEEL THREE KNUCKLEHEAVY WEIGHT SWING CLEARJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA789 5" 75330 P 135.01 24 3 47127 mm75331 AP 140.25 24 3 4775335 3 171.68 24 3 4775336 4 140.25 24 3 4775338 10 140.25 24 3 4775346 10A 171.68 24 3 4775339 10B 171.68 24 3 47Hinges are NRP 75342 26 171.68 24 3 47and Reversible. 75343 26D 142.51 24 3 47Price Code 30HM-4

HM-5HALF MORTISE HINGESSTEEL FIVE KNUCKLE STANDARD WEIGHTJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTT2774 4 1 ⁄2" 57877 P 19.24 24 3 23114.30 mm64960 AP 22.32 24 3 2364950 3 33.50 24 3 2364951 4 22.32 24 3 2364954 10 22.32 24 3 2364964 10A 33.50 24 3 2364955 10B 33.50 24 3 2364958 26 33.50 24 3 2364959 26D 25.33 24 3 23TA2774 4 1 ⁄2" 57880 P 30.86 24 3 23114.30 mm57885 AP 40.06 24 3 2357881 3 56.21 24 3 2357888 4 40.06 24 3 2357883 10 40.06 24 3 2364989 10A 56.21 24 3 2364983 10B 56.21 24 3 2364986 26 56.21 24 3 2357884 26D 37.20 24 3 235" 57955 P 49.81 24 3 27127 mm57959 AP 59.21 24 3 2757963 3 74.59 24 3 2757956 4 59.21 24 3 2757960 10 59.21 24 3 2765007 10A 74.59 24 3 2765008 10B 74.59 24 3 2765011 26 74.59 24 3 2757958 26D 63.99 24 3 27TCA2774 4 1 ⁄2" 67375 P 38.93 24 3 23114.30 mm67376 AP 44.01 24 3 2367383 3 59.29 24 3 2367377 4 44.01 24 3 2367378 10 44.01 24 3 2367386 10A 59.29 24 3 2367379 10B 59.29 24 3 2367382 26 59.29 24 3 2367381 26D 47.01 24 3 235" 67393 P 56.78 24 3 27127 mm67394 AP 64.74 24 3 2767401 3 81.81 24 3 2767395 4 64.74 24 3 2767396 10 64.74 24 3 2767406 10A 81.81 24 3 2767397 10B 81.81 24 3 2767404 26 81.81 24 3 2767399 26D 69.99 24 3 27Price Code 50HM-51.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

HM-6HALF MORTISE HINGESSTANDARD WEIGHT FIVE KNUCKLENON-FERROUS BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA3374 4 1 ⁄2" 61406 P 97.87 24 3 28114.30 mm61412 AP 97.87 24 3 2861423 3 122.33 24 3 2861424 4 97.87 24 3 2861413 10 97.87 24 3 2861405 10A 122.33 24 3 2861417 10B 122.33 24 3 2861411 26 122.33 24 3 2861410 26D 105.28 24 3 2861414 32 149.01 24 3 2861415 32D 142.59 24 3 285" 61461 P 127.59 24 3 32127 mm61441 AP 127.59 24 3 3261462 3 144.24 24 3 3261463 4 127.59 24 3 3261440 10 127.97 24 3 3261438 10A 144.24 24 3 3261446 10B 144.24 24 3 3261467 26 144.24 24 3 3261468 26D 124.27 24 3 3261444 32 179.11 24 3 3261445 32D 171.51 24 3 32TCA3374 4 1 ⁄2" 67505 P 106.94 24 3 28114.30 mm67506 AP 106.94 24 3 2867513 3 133.72 24 3 2867507 4 106.94 24 3 2867508 10 106.94 24 3 2867518 10A 133.72 24 3 2867509 10B 133.72 24 3 2867516 26 133.72 24 3 2867511 26D 115.02 24 3 285" 67522 P 139.47 24 3 32127 mm67523 AP 139.47 24 3 3267530 3 157.57 24 3 3267524 4 139.47 24 3 3267525 10 139.47 24 3 3267521 10A 157.57 24 3 3267526 10B 157.57 24 3 3267533 26 157.57 24 3 3267528 26D 135.86 24 3 32Price Code 50HM-6

HM-7HALF MORTISE HINGESHEAVY WEIGHT NON-FERROUS BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTT4A3384 4 1 ⁄2" 70775 P 115.02 24 3 40114.30 mm 70782 AP 115.02 24 3 4070776 3 140.74 24 3 4070777 4 115.02 24 3 4061641 10 115.02 24 3 4070783 10A 140.74 24 3 4061643 10B 140.74 24 3 4070781 26 140.74 24 3 4061640 26D 123.01 24 3 4070770 32 169.07 24 3 4070771 32D 164.10 24 3 405" 70800 P 139.47 24 3 40127 mm 70807 AP 139.47 24 3 4070801 3 164.79 24 3 4070802 4 139.47 24 3 4061661 10 139.47 24 3 4070808 10A 164.79 24 3 4061665 10B 164.79 24 3 4070806 26 164.79 24 3 4061660 26D 146.87 24 3 4061663 32D 193.53 24 3 406" 152.4 mm 70829 P 176.76 18 3 63for 1 3 ⁄4" 44.4 mm 70837 AP 176.76 18 3 63door 70830 3 210.07 18 3 6370831 4 176.76 18 3 6370841 10 176.76 18 3 6370824 10A 210.07 18 3 6370825 10B 210.07 18 3 6370835 26 210.07 18 3 6370836 26D 187.96 18 3 63Price Code 50HM-71.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

HM-8HALF MORTISE HINGESHEAVY WEIGHT NON-FERROUSCONCEALED BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTCA3384 4 1 ⁄2" 67538 P 114.39 24 3 40114.30 mm 67539 AP 114.39 24 3 4067546 3 139.18 24 3 4067540 4 114.39 24 3 4067541 10 114.39 24 3 4067535 10A 139.18 24 3 4067542 10B 139.18 24 3 4067549 26 139.18 24 3 4067544 26D 122.71 24 3 405" 67780 P 138.56 24 3 47127 mm 67781 AP 138.56 24 3 4767788 3 163.71 24 3 4767782 4 138.56 24 3 4767783 10 138.56 24 3 4767793 10A 163.71 24 3 4767784 10B 163.71 24 3 4767791 26 163.71 24 3 4767786 26D 146.09 24 3 47Price Code 50HM-8

HM-9HALF MORTISE HINGESSTEEL HEAVY WEIGHT BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTT4A3784 4 1 ⁄2" 58220 P 77.96 24 3 31114.30 mm 72478 AP 91.10 24 3 3172482 3 107.05 24 3 3158222 4 91.10 24 3 3172484 10 91.10 24 3 3172491 10A 107.05 24 3 3172485 10B 107.05 24 3 3172488 26 107.05 24 3 3158223 26D 95.32 24 3 315" 58240 P 99.63 24 3 36127 mm 58241 AP 104.32 24 3 3672512 3 121.59 24 3 3672513 4 104.32 24 3 3672515 10 104.32 24 3 3672520 10A 121.59 24 3 3672516 10B 121.59 24 3 3672519 26 121.59 24 3 3658242 26D 107.89 24 3 366" 152.4 mm 58270 P 120.36 12 3 321 3 ⁄4" 44.40 mm door 72560 AP 125.43 12 3 3258273 3 130.53 12 3 3272542 4 125.43 12 3 3258284 10 125.43 12 3 3272541 10A 150.76 12 3 3272544 10B 150.76 12 3 3272547 26 150.76 12 3 3258283 26D 131.81 12 3 32Price Code 50HM-91.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

HM-10HALF MORTISE HINGESSTEEL HEAVY WEIGHTCONCEALED BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTCA3784 4 1 ⁄2" 67460 P 85.47 24 3 31114.30 mm 67461 AP 99.63 24 3 3167468 3 116.90 24 3 3167462 4 99.63 24 3 3167463 10 99.63 24 3 3167473 10A 116.90 24 3 3167464 10B 116.90 24 3 3167471 26 116.90 24 3 3167466 26D 104.71 24 3 315" 67488 P 109.29 24 3 36127 mm 67489 AP 114.18 24 3 3667496 3 132.94 24 3 3667490 4 114.18 24 3 3667491 10 114.18 24 3 3667486 10A 132.94 24 3 3667492 10B 132.94 24 3 3667499 26 132.94 24 3 3667494 26D 118.77 24 3 36STEEL SWING CLEAR HEAVY WEIGHT BEARINGT4A3789 5" 73021 P 114.08 24 3 47127 mm 73022 AP 115.87 24 3 4773026 3 139.14 24 3 4773027 4 115.87 24 3 4773029 10 115.87 24 3 4773037 10A 139.14 24 3 4773030 10B 139.14 24 3 4773033 26 139.14 24 3 4773034 26D 119.06 24 3 47Price Code 50HM-10

HS-1HALF SURFACE HINGESSTANDARD WEIGHTNON-FERROUS BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA372 4 1 ⁄2" 74612 P 134.60 24 3 30114.30 mm 74620 AP 134.60 24 3 3074613 3 168.61 24 3 3074614 4 134.60 24 3 3074607 10 134.60 24 3 3074621 10A 168.61 24 3 3074608 10B 168.61 24 3 3074618 26 168.61 24 3 3074619 26D 144.90 24 3 3074605 32D 200.38 24 3 305" 74631 P 161.33 24 3 38127 mm 74639 AP 161.33 24 3 3874632 3 202.93 24 3 3874633 4 161.33 24 3 3874626 10 161.33 24 3 3874640 10A 202.93 24 3 3874627 10B 202.93 24 3 3874637 26 202.93 24 3 38Price Code 3074638 26D 169.54 24 3 3874624 32D 235.62 24 3 38TA2372 4 1 ⁄2" 57685 AP 95.99 24 3 30114.30 mm 57686 P 95.99 24 3 3057687 3 122.17 24 3 3057688 4 95.99 24 3 3057689 10 95.99 24 3 3057690 10B 122.17 24 3 3057691 26 122.17 24 3 3057692 26D 105.34 24 3 3057694 D-3 95.99 24 3 3057695 D-4 95.99 24 3 3057696 32D 142.84 24 3 30Refer to page HS-12 for Back Plates.Price Code 50HS-11.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

HS-2HALF SURFACE HINGESHEAVY WEIGHT NON-FERROUS BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.1/01/10vPRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA382 4 1 ⁄2" 74764 P 170.96 24 3 50114.30 mm 74772 AP 170.96 24 3 5074765 3 208.91 24 3 5074766 4 170.96 24 3 5074759 10 170.96 24 3 5074773 10A 208.91 24 3 5074760 10B 189.91 24 3 5074770 26 208.91 24 3 5074771 26D 184.75 24 3 5074757 32D 243.20 24 3 505" 74783 P 207.34 24 3 57127 mm 74791 AP 207.34 24 3 5774784 3 244.85 24 3 5774785 4 207.34 24 3 5774778 10 207.34 24 3 5774792 10A 244.85 24 3 5774779 10B 244.85 24 3 5774789 26 244.85 24 3 5774790 26D 216.80 24 3 5774776 32D 285.75 24 3 576" 152.4 mm 74802 P 262.64 18 3 66*for 74810 AP 262.64 18 3 661 3 ⁄4" 44.4 mm door 74803 3 315.97 18 3 6674804 4 262.64 18 3 6674797 10 262.64 18 3 6674811 10A 315.97 18 3 6674798 10B 315.97 18 3 6674808 26 315.97 18 3 6674809 26D 276.52 18 3 66Refer to page HS-12 for Back Plates.Price Code 30HS-2

HS-3HALF SURFACE HINGESSTEEL STANDARD WEIGHTJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA772 4 1 ⁄2" 74453 P 51.29 24 3 34114.30 mm 74454 AP 56.00 24 3 3474458 3 80.45 24 3 3474459 4 56.00 24 3 3474461 10 56.00 24 3 3474469 10A 80.45 24 3 3474462 10B 80.45 24 3 3474465 26 80.45 24 3 3474466 26D 53.58 24 3 345" 74472 P 71.10 24 3 43127 mm 74473 AP 85.49 24 3 4374477 3 109.01 24 3 4374478 4 85.49 24 3 4374480 10 85.49 24 3 4374470 10A 109.01 24 3 4374481 10B 109.01 24 3 4374484 26 109.01 24 3 4374485 26D 90.93 24 3 43Refer to page HS-12 for Back Plates.Price Code 30HS-31.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

HS-4HALF SURFACE HINGESSTEEL HEAVY WEIGHT BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA782 4 1 ⁄2" 75066 P 119.09 24 3 38114.30 mm 75067 AP 140.78 24 3 3875071 3 165.23 24 3 3875072 4 140.78 24 3 3875074 10 140.78 24 3 3875082 10A 165.23 24 3 3875075 10B 165.23 24 3 3875078 26 165.23 24 3 3875079 26D 131.11 24 3 385" 75085 P 152.16 24 3 48127 mm 75086 AP 161.11 24 3 4875090 3 191.94 24 3 4875091 4 161.11 24 3 4875093 10 161.11 24 3 4875101 10A 191.94 24 3 4875094 10B 191.94 24 3 4875097 26 191.94 24 3 4875098 26D 149.19 24 3 486" 152.4 mm 75104 P 185.16 18 3 68*for 75105 AP 195.93 18 3 681 3 ⁄4" 44.4 mm door 75109 3 230.77 18 3 6875110 4 195.93 18 3 6875112 10 195.93 18 3 6875120 10A 230.77 18 3 6875113 10B 230.77 18 3 6875116 26 230.77 18 3 6875117 26D 203.54 18 3 68Refer to page HS-12 for Back Plates.STEEL HEAVY WEIGHT SWING CLEARTA796 5" 75387 P 147.36 24 3 70127 mm 75388 AP 153.62 24 3 7075392 3 188.14 24 3 7075393 4 153.62 24 3 7075395 10 153.62 24 3 7075403 10A 188.14 24 3 7075396 10B 188.14 24 3 7075399 26 188.14 24 3 7075400 26D 140.14 24 3 70Price Code 30HS-4

HS-5HALF SURFACE HINGESSTEEL STANDARD WEIGHTJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTT2772 4 1 ⁄2" 57670 P 20.12 24 3 30114.30 mm 57673 AP 24.35 24 3 3064910 3 36.37 24 3 3057676 4 24.35 24 3 3057675 10 24.35 24 3 3064908 10A 36.37 24 3 3064913 10B 36.37 24 3 3064915 26 36.37 24 3 3057674 26D 26.38 24 3 30TA2772 4 1 ⁄2" 57710 P 29.13 24 3 30114.30 mm 57719 AP 41.93 24 3 3057714 3 61.34 24 3 3057712 4 41.93 24 3 3057715 10 41.93 24 3 3057708 10A 61.34 24 3 3057721 10B 61.34 24 3 3057716 26 61.34 24 3 3057717 26D 35.12 24 3 305" 57830 P 54.56 24 3 38127 mm 57834 AP 64.75 24 3 3864920 3 81.59 24 3 3864921 4 64.75 24 3 3857835 10 64.75 24 3 3857829 10A 81.59 24 3 3857839 10B 81.59 24 3 3864926 26 81.59 24 3 3857833 26D 46.73 24 3 38Refer to page HS-12 for Back Plates.Price Code 50HS-51.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

HS-6HALF SURFACE HINGESSTEEL STANDARD WEIGHTCONCEALED BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTCA2772 4 1 ⁄2" 67933 P 42.85 24 3 30114.30 mm 67934 AP 45.93 24 3 3067941 3 67.11 24 3 3067935 4 45.93 24 3 3067936 10 45.93 24 3 3067946 10A 67.11 24 3 3067937 10B 67.11 24 3 3067944 26 67.11 24 3 3067939 26D 51.69 24 3 305" 67950 P 59.69 24 3 38127 mm 67951 AP 70.70 24 3 3867958 3 89.08 24 3 3867952 4 70.70 24 3 3867953 10 70.70 24 3 3867963 10A 89.08 24 3 3867954 10B 89.08 24 3 3867961 26 89.08 24 3 3867956 26D 68.42 24 3 38Price Code 50HS-6Refer to page HS-12 for Back Plates.

HS-7HALF SURFACE HINGESHEAVY WEIGHT NON-FERROUS BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTT4A3382 4 1 ⁄2" 70560 P 121.55 24 3 50114.30 mm 61565 AP 121.55 24 3 5070561 3 148.27 24 3 5070562 4 121.55 24 3 5061568 10 121.55 24 3 5061561 10A 148.27 24 3 5061569 10B 148.27 24 3 5070566 26 148.27 24 3 5070567 26D 129.69 24 3 5061562 32 180.43 24 3 5061563 32D 155.15 24 3 505" 61589 P 147.14 24 3 57127 mm 61597 AP 147.14 24 3 5761590 3 173.75 24 3 5761591 4 147.14 24 3 5761584 10 147.14 24 3 5761580 10A 173.75 24 3 5761585 10B 173.75 24 3 5761579 26 173.75 24 3 5761596 26D 154.33 24 3 5761581 32 154.33 24 3 5761582 32D 202.53 24 3 576" 70602 P 185.04 18 3 66152.4 mm 70610 AP 185.04 18 3 6670603 3 219.88 18 3 6670604 4 185.04 18 3 6661604 10 185.04 18 3 6670611 10A 219.88 18 3 6661605 10B 219.88 18 3 6670608 26 219.88 18 3 6670609 26D 195.86 18 3 66Refer to page HS-12 for Back Plates.Price Code 50HS-71.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

HS-8HALF SURFACE HINGESHEAVY WEIGHT NON-FERROUSCONCEALED BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTCA3382 4 1 ⁄2" 68280 P 132.87 24 3 50114.30 mm 68281 AP 132.87 24 3 5068288 3 161.94 24 3 5068282 4 132.87 24 3 5068283 10 132.87 24 3 5068293 10A 161.94 24 3 5068284 10B 161.94 24 3 5068291 26 142.41 24 3 5068286 26D 142.41 24 3 505" 68453 P 160.81 24 3 57127 mm 68451 AP 160.81 24 3 5768458 3 189.89 24 3 5768452 4 160.81 24 3 5768450 10 160.81 24 3 5768465 10A 189.89 24 3 5768454 10B 189.89 24 3 5768461 26 189.89 24 3 5768456 26D 169.54 24 3 57Price Code 50HS-8Refer to page HS-12 for Back Plates.

HS-9HALF SURFACE HINGESSTEEL HEAVY WEIGHT BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTT4A3782 4 1 ⁄2" 58105 P 85.09 24 3 38114.30 mm 58102 AP 99.88 24 3 3858110 3 117.03 24 3 3858111 4 99.88 24 3 3858106 10 99.88 24 3 3858120 10A 117.03 24 3 3858108 10B 117.03 24 3 3858118 26 117.03 24 3 3858107 26D 80.69 24 3 385" 58145 P 97.20 24 3 48127 mm 58147 AP 114.37 24 3 4872280 3 133.17 24 3 4872281 4 114.37 24 3 4858146 10 114.37 24 3 4858149 10A 133.17 24 3 4872283 10B 133.17 24 3 4872286 26 133.17 24 3 4872287 26D 96.12 24 3 486" 152.4 mm 58180 P 129.78 12 3 431 3 ⁄4" 44.40 mm door 58179 AP 136.35 12 3 4372297 3 163.78 12 3 4372298 4 136.35 12 3 4372300 10 136.35 12 3 4358183 10A 163.78 12 3 4372301 10B 163.78 12 3 4372304 26 163.78 12 3 4358181 26D 123.86 12 3 43Refer to page HS-12 for Back Plates.Price Code 50HS-91.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

HS-10HALF SURFACE HINGESSTEEL HEAVY WEIGHTCONCEALED BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTCA3782 4 1 ⁄2" 68800 P 93.62 24 3 38114.30 mm 68801 AP 109.23 24 3 3868808 3 128.04 24 3 3868802 4 109.23 24 3 3868803 10 109.23 24 3 3868813 10A 128.04 24 3 3868804 10B 128.04 24 3 3868811 26 128.04 24 3 3868806 26D 102.23 24 3 385" 68865 P 106.87 24 3 48127 mm 68866 AP 125.06 24 3 4868873 3 145.60 24 3 4868867 4 125.06 24 3 4868868 10 125.06 24 3 4868878 10A 145.60 24 3 4868869 10B 145.60 24 3 4868876 26 145.60 24 3 4868871 26D 116.31 24 3 48Refer to page HS-12 for Back Plates.Price Code 50HS-10

HS-11HALF SURFACE HINGESSTEEL SWING CLEARHEAVY WEIGHT BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTT4A3796 5" 73509 P 104.61 12 35127 mm 73510 AP 107.05 12 3573514 3 128.53 12 3573515 4 107.05 12 3573517 10 107.05 12 3573525 10A 128.53 12 3573518 10B 128.53 12 3573521 26 128.53 12 3573522 26D 87.94 12 35Price Code 50HS-111.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

HS-12HALF SURFACE HINGESSTEEL BACK PLATESJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE CASEEACH QUANTITY WEIGHTBP-10 4 1 ⁄2" 63241 P 7.98(TA2772) 114.30 mm63242 10 7.98(T4A3782)63243 10B 9.01 AS ORDERED63240 26D 6.085" 63248 P 8.44127 mm63249 10 8.44 AS ORDERED63247 26D 7.33BP-11 5" 63256 P 8.44(T4A3797) 127 mm63257 10 8.44 AS ORDERED63255 26D 8.44BP-12 4 1 ⁄2" 55192 P 7.98(1572) 114.30 mm55193 26D 7.98 AS ORDEREDPrice Code 50HS-12

FS-1FULL SURFACE HINGESSTANDARD WEIGHT THREE KNUCKLENON-FERROUS BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA371 4 1 ⁄2" 74555 P 127.59 24 3 34114.30 mm74563 AP 127.59 24 3 3474556 3 159.82 24 3 3474557 4 127.59 24 3 3474550 10 127.59 24 3 3474564 10A 159.82 24 3 3474551 10B 159.82 24 3 3474561 26 159.82 24 3 3474562 26D 137.32 24 3 3474548 32D 189.91 24 3 345" 74574 P 152.90 24 3 43127 mm74582 AP 152.90 24 3 4374575 3 192.35 24 3 4374576 4 152.90 24 3 4374569 10 152.90 24 3 4374584 10A 192.35 24 3 4374570 10B 192.35 24 3 4374580 26 192.35 24 3 4374581 26D 160.69 24 3 4374567 32D 223.32 24 3 43Price Code 30FS-11.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FS-2FULL SURFACE HINGESHEAVY WEIGHT THREE KNUCKLENON-FERROUS BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA381 4 1 ⁄2" 74707 P 166.15 24 3 46114.30 mm74715 AP 166.15 24 3 4674708 3 204.04 24 3 4674709 4 166.15 24 3 4674702 10 166.15 24 3 4674716 10A 204.04 24 3 4674703 10B 204.04 24 3 4674713 26 204.04 24 3 4674714 26D 180.96 24 3 4674700 32D 229.06 24 3 465" 74726 P 201.51 24 3 62127 mm74734 AP 201.51 24 3 6274727 3 237.93 24 3 6274728 4 201.51 24 3 6274721 10 201.51 24 3 6274735 10A 237.93 24 3 6274722 10B 237.93 24 3 6274732 26 237.93 24 3 6274733 26D 211.44 24 3 6274719 32D 268.51 24 3 62Price Code 30FS-2

FS-3FULL SURFACE HINGESSTEEL STANDARD WEIGHTTHREE KNUCKLE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA771 4 1 ⁄2" 74396 P 47.85 24 3 27114.30 mm74397 AP 58.25 24 3 2774401 3 75.23 24 3 2774402 4 58.25 24 3 2774404 10 58.25 24 3 2774412 10A 75.23 24 3 2774405 10B 75.23 24 3 2774408 26 75.23 24 3 2774409 26D 64.65 24 3 275" 74415 P 140.54 24 3 35127 mm74416 AP 83.08 24 3 3574420 3 105.96 24 3 3574421 4 83.08 24 3 3574423 10 80.03 24 3 3574431 10A 102.07 24 3 3574424 10B 102.07 24 3 3574427 26 102.07 24 3 3574428 26D 85.38 24 3 35Price Code 30FS-31.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FS-4FULL SURFACE HINGESSTEEL HEAVY WEIGHTTHREE KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA781 4 1 ⁄2" 75009 P 111.55 24 3 37114.30 mm75010 AP 131.81 24 3 3775014 3 154.70 24 3 3775015 4 131.81 24 3 3775017 10 131.81 24 3 3775025 10A 154.70 24 3 3775018 10B 154.70 24 3 3775021 26 154.70 24 3 3775022 26D 137.26 24 3 375" 75028 P 147.74 24 3 44127 mm75029 AP 156.61 24 3 4475033 3 179.67 24 3 4475034 4 150.85 24 3 4475036 10 150.85 24 3 4475044 10A 179.67 24 3 4475037 10B 179.67 24 3 4475040 26 179.67 24 3 4475041 26D 158.66 24 3 446" 152.4 mm 75047 P 176.57 18 3 48*for 75048 AP 186.88 18 3 481 3 ⁄4" 44.4 mm door 75052 3 220.19 18 3 4875053 4 186.88 18 3 4875055 10 186.88 18 3 4875063 10A 220.19 18 3 4875056 10B 220.19 18 3 4875059 26 220.19 18 3 4875060 26D 195.43 18 3 48Price Code 30FS-4

FS-5FULL SURFACE HINGESSTEEL SWING CLEAR HEAVY WEIGHTTHREE KNUCKLE BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA797 5" 75406 P 124.03 24 3 64127 mm75407 AP 143.72 24 3 6475411 3 176.00 24 3 6475412 4 143.72 24 3 6475414 10 143.72 24 3 6475422 10A 176.00 24 3 6475415 10B 176.00 24 3 6475418 26 176.00 24 3 6475419 26D 131.25 24 3 64Price Code 30FS-51.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FS-6FULL SURFACE HINGESSTEEL STANDARD WEIGHTFIVE KNUCKLE BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTA2771 4 1 ⁄2" 57525 P 35.56 24 3 27114.30 mm57529 AP 43.06 24 3 2757518 3 56.57 24 3 2757519 4 43.06 24 3 2757528 10 43.06 24 3 2757534 10A 56.57 24 3 2757530 10B 51.43 24 3 2757524 26 56.57 24 3 2757533 26D 48.60 24 3 275" 57575 P 49.81 24 3 35127 mm57572 AP 59.39 24 3 3557578 3 74.87 24 3 3557579 4 59.39 24 3 3557576 10 59.39 24 3 3557584 10A 74.87 24 3 3557582 10B 74.87 24 3 3557573 26 74.87 24 3 3557577 26D 63.99 24 3 35STANDARD WEIGHT FIVE KNUCKLE CONCEALED BEARINGTCA2771 4 1 ⁄2" 67797 P 39.12 24 3 27114.30 mm67796 AP 47.01 24 3 2767798 3 61.82 24 3 2767799 4 47.0167800 10 47.01 24 3 2767795 10A 61.82 24 3 2767801 10B 61.82 24 3 2767808 26 61.82 24 3 2767803 26D 53.48 24 3 275" 67850 P 54.79 24 3 35127 mm67851 AP 64.92 24 3 3567858 3 81.81 24 3 3567852 4 64.92 24 3 3567853 10 64.92 24 3 3567862 10A 81.81 24 3 3567854 10B 81.81 24 3 3567861 26 81.81 24 3 3567856 26D 70.36 24 3 35Price Code 50FS-6

FS-7FULL SURFACE HINGESHEAVY WEIGHT FIVE KNUCKLENON-FERROUS BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTT4A3381 4 1 ⁄2" 61515 P 115.22 24 3 46114.30 mm61518 AP 115.22 24 3 4661511 3 140.14 24 3 4661517 4 115.22 24 3 4661510 10 115.22 24 3 4661506 10A 140.14 24 3 4661516 10B 140.14 24 3 4668501 26 140.14 24 3 4668502 26D 123.01 24 3 4661507 32 173.46 24 3 4661508 32D 164.01 24 3 465" 63250 P 139.47 24 3 62127 mm63251 AP 139.47 24 3 6263252 3 163.71 24 3 6261528 4 139.47 24 3 6261520 10 139.47 24 3 6263253 10A 163.71 24 3 6261519 10B 163.71 24 3 6263254 26 163.71 24 3 6261521 26D 146.87 24 3 6261522 32 202.09 24 3 6261523 32D 191.96 24 3 626" 63283 P 175.40 18 3 67152.40 mm63291 AP 175.40 18 3 6763284 3 208.61 18 3 6763285 4 175.40 18 3 6763278 10 175.40 18 3 6763292 10A 208.61 18 3 6763279 10B 208.61 18 3 6763289 26 208.61 18 3 6763290 26D 185.52 18 3 67Price Code 50FS-71.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FS-8FULL SURFACE HINGESHEAVY WEIGHT FIVE KNUCKLENON-FERROUS CONCEALED BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTCA3381 4 1 ⁄2" 67967 P 125.93 24 3 46114.30 mm67968 AP 125.93 24 3 4667975 3 153.77 24 3 4667969 4 125.93 24 3 4667970 10 125.93 24 3 4667980 10A 153.77 24 3 4667971 10B 153.77 24 3 4667978 26 153.77 24 3 4667973 26D 134.99 24 3 465" 68262 P 152.42 24 3 62127 mm68263 AP 152.42 24 3 6268270 3 179.97 24 3 6268264 4 152.42 24 3 6268265 10 152.42 24 3 6268275 10A 179.97 24 3 6268266 10B 179.97 24 3 6268273 26 179.97 24 3 6268268 26D 161.19 24 3 62Price Code 50FS-8

FS-9FULL SURFACE HINGESHEAVY WEIGHTNON-FERROUS BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHCASE BOX CASEQTY. QTY. WEIGHTT4A3385 4 1 ⁄2" 61693 P 24 3 40114.30 mm 61699 AP 24 3 4061694 3 24 3 4061695 4 24 3 4061689 10 24 3 4061704 10A 24 3 4061685 10B 24 3 4061705 26 24 3 4061706 26D 24 3 4061708 32 24 3 4061687 32D 24 3 405" 61735 P 24 3 50127 mm 61743 AP 24 3 5061736 3 24 3 5061737 4 24 3 5061730 10 4 3 5061744 10A 24 3 5061731 10B 24 3 5061741 26 24 3 5061742 26D 24 3 5061727 32 24 3 5061728 32D 24 3 506" 64527 P 24 3 62152.40 mm 64535 AP 24 3 6264528 3 24 3 6264529 4 24 3 6261765 10 24 3 6264534 10A 24 3 6264523 10B 24 3 6264533 26 24 3 6261763 26D 24 3 62Price Code 50DISCONTINUEDFS-91.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FS-10FULL SURFACE HINGESSTEEL HEAVY WEIGHT BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTT4A3781 4 1 ⁄2" 58065 P 77.69 24 3 37114.30 mm 58062 AP 91.19 24 3 3772188 3 107.05 24 3 3772189 4 91.19 24 3 3772191 10 91.19 24 3 3772198 10A 107.05 24 3 3772192 10B 107.05 24 3 3772195 26 107.05 24 3 3758066 26D 95.13 24 3 375" 58075 P 76.84 24 3 44127 mm 72217 AP 104.42 24 3 4472221 3 121.59 24 3 4458076 4 90.41 24 3 4472223 10 104.42 24 3 4472231 10A 121.59 24 3 4472224 10B 121.59 24 3 4472227 26 121.59 24 3 4472228 26D 107.98 24 3 446" 58090 P 118.49 18 3 48152.4 mm 58092 AP 125.43 18 3 4872251 3 150.68 18 3 4872252 4 125.43 18 3 4872254 10 125.43 18 3 4872262 10A 150.68 18 3 4872255 10B 150.68 18 3 4872258 26 150.68 18 3 4872259 26D 130.31 18 3 48Price Code 50FS-10

FS-11FULL SURFACE HINGESSTEEL HEAVY WEIGHTCONCEALED BEARINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTTCA3781 4 1 ⁄2" 68470 P 85.47 24 3 37114.30 mm 68471 AP 99.74 24 3 3768478 3 116.90 24 3 3768472 4 99.74 24 3 3768473 10 99.74 24 3 3768483 10A 116.90 24 3 3768474 10B 116.90 24 3 3768481 26 116.90 24 3 3768476 26D 104.61 24 3 375" 68780 P 97.58 24 3 44127 mm 68781 AP 104.42 24 3 4468788 3 121.59 24 3 4468782 4 104.42 24 3 4468783 10 104.42 24 3 4468793 10A 121.59 24 3 4468784 10B 121.59 24 3 4468791 26 121.59 24 3 4468786 26D 118.77 24 3 44Price Code 50FS-111.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

FS-12FULL SURFACE HINGESSTEEL HEAVY WEIGHT BEARINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHCASE BOX CASEQTY. QTY. WEIGHTT4A3785 4 1 ⁄2" 58285 P 24 3 31114.30 mm 58288 AP 24 3 3172601 3 24 3 3172602 4 24 3 3172604 10 24 3 3172612 10A 24 3 3172605 10B 24 3 3172608 26 24 3 3172609 26D 24 3 315" 58300 P 24 3 36127 mm 58302 AP 24 3 3672630 3 24 3 3672631 4 24 3 3672633 10 24 3 3672641 10A 24 3 3672634 10B 24 3 3672637 26 24 3 3672638 26D 24 3 36T4A3797 5" 73549 P 12 3 32127 mm 73550 AP 12 3 3273554 3 12 3 3273555 4 12 3 3273557 10 12 3 3273565 10A 12 3 3273558 10B 12 3 3273561 26 12 3 3273562 26D 12 3 32Price Code 50FS-12DISCONTINUED

SP-1SPRING HINGESSTEEL STANDARD WEIGHTFULL MORTISE SINGLE ACTING✓=June 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHT1502 4" x 4" 155913 P 11.69 48 3 40101.60 mm x 101.60 mm 155902 AP 16.47 48 3 40155908 3 18.49 48 3 40155903 4 12.83 48 3 40155904 10 16.47 48 3 40155928 10A 18.49 48 3 40155905 10B 18.49 48 3 40155911 26 20.55 48 3 40155907 26D 13.78 48 3 40155901 D3 16.47 48 3 40155929 D4 16.47 48 3 404 1 ⁄2" x 4" 156002 P 20.67 48 3 54114.30 mm x 101.60 mm 156003 AP 25.58 48 3 54C US156010 3 28.55 48 3 54156004 4 22.35 48 3 54LISTED156005 10 25.58 48 3 54156031 10A 28.55 48 3 54156006 10B 28.55 48 3 54156009 26 25.95 48 3 54156008 26D 21.46 48 3 54156001 D3 25.58 48 3 54156032 D4 25.58 48 3 54156007 15 25.59 48 3 54156011 9 32.41 48 3 54156012 14 32.41 48 3 54156013 2C 25.58 48 3 54156014 PG 25.58 48 3 544 1 ⁄2" x 4 1 ⁄2" 156017 ✓ P 15.27 48 3 54114.30 mm x 114.30 mm 156018 AP 24.85 48 3 54156025 ✓ 3 21.77 48 3 54156019 ✓ 4 16.86 48 3 54156020 10 18.88 48 3 54156030 10A 28.55 48 3 54156021 10B 21.77 48 3 54156024 26 21.77 48 3 54156023 ✓ 26D 20.79 48 3 54156016 D3 24.85 48 3 54156015 D4 24.85 48 3 54156022 15 24.79 48 3 54156026 9 32.41 48 3 54156027 14 32.41 48 3 54156028 2C 24.85 48 3 54156029 PG 24.85 48 3 541502 R 4 1 ⁄2" x 4 1 ⁄2" 156034 P 23.64 48 3 54Reverse Spring 114.30 mm x 114.30 mm 156035 26D 30.88 48 3 541502 x TRS Option $2.75NOTE: Consult the Factory for information on our 1502 with new Security FeaturePrice Code 71SP-11.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

SP-2SPRING HINGESSTEEL STANDARD WEIGHTFULL MORTISE SINGLE ACTINGJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISH PRICECASE BOX CASEQTY. QTY. WEIGHT1522 4 1 ⁄2" x 4" 155981 P 62.00 SET 16 SETS 1 SET 54114.30 mm x 101.60 mm 155982 AP 76.71 SET 16 SETS 1 SET 54155989 3 85.65 SET 16 SETS 1 SET 54155983 4 67.07 SET 16 SETS 1 SET 54155984 10 76.71 SET 16 SETS 1 SET 54155993 10A 85.65 SET 16 SETS 1 SET 54155985 10B 85.65 SET 16 SETS 1 SET 54155988 26 85.65 SET 16 SETS 1 SET 54155987 26D 84.44 SET 16 SETS 1 SET 54155980 D3 76.71 SET 16 SETS 1 SET 54C US155994 D4 76.71 SET 16 SETS 1 SET 54155986 15 84.45 SET 16 SETS 1 SET 54LISTED155990 9 97.22 SET 16 SETS 1 SET 54155991 14 97.22 SET 16 SETS 1 SET 54155992 2C 76.71 SET 16 SETS 1 SET 544 1 ⁄2" x 4 1 ⁄2" 156041 P 60.07 SET 16 SETS 1 SET 54114.30 mm x 114.30 mm 156042 AP 74.55 SET 16 SETS 1 SET 54156049 3 85.65 SET 16 SETS 1 SET 54156043 4 66.34 SET 16 SETS 1 SET 54156044 10 74.31 SET 16 SETS 1 SET 54156038 10A 85.65 SET 16 SETS 1 SET 54156045 10B 85.65 SET 16 SETS 1 SET 54156048 26 95.16 SET 16 SETS 1 SET 54156047 26D 62.36 SET 16 SETS 1 SET 54156040 D3 74.55 SET 16 SETS 1 SET 54156039 D4 74.55 SET 16 SETS 1 SET 54156046 15 81.31 SET 16 SETS 1 SET 54156050 9 97.22 SET 16 SETS 1 SET 54156051 14 97.22 SET 16 SETS 1 SET 54156052 2C 74.55 SET 16 SETS 1 SET 541552 4 1 ⁄2" x 4" 156056 32D 58.75 EA. 48 3 54C USLISTEDPrice Code 71SP-2114.30 mm x 101.60 mm4 1 ⁄2" x 4 1 ⁄2" 156080 32D 52.00 EA. 48 3 56114.30 mm x 114.30 mmSTAINLESS STEEL STANDARD WEIGHT

SP-3SPRING HINGESSTEEL STANDARD WEIGHTHALF SURFACE SINGLE ACTINGJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHT1572 4 1 ⁄2" 156084 P 32.16 24 3 30114.30 mm156085 AP 38.68 24 3 30156092 3 44.63 24 3 30156086 4 38.68 24 3 30156087 10 38.68 24 3 30156096 10A 44.63 24 3 30156088 10B 44.63 24 3 30156091 26 44.63 24 3 30C US156090 26D 42.54 24 3 30156083 D3 38.68 24 3 30LISTED156097 D4 38.68 24 3 30Refer to page HS-12 for BP-12 Backplate.PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTMPS60 4½" x 4½" 76380 P 6.15 48 3 54C US114.30 mm x 114.30 mm76378 26D 6.50 48 3 54LISTEDMPB679 4½" x 4½" 76379 26D 16.09 16 SETS 1 SET 30114.30 mm x 114.30 mmPrice Code 71 for 1572, Code 57 for MPS60, MPB679SP-31.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

SP-4SPRING HINGESFULL MORTISE DOUBLE ACTINGSTEEL HEAVY DUTY SPRINGBUTT HINGEJune 15, 2011PRODUCT SIZE PART # FINISH PRICECASE BOX CASEQTY. QTY. WEIGHTCS1 155001 P 278.70 EA. 1 1 17155004 AP 265.43 EA. 1 1 17155000 D4 278.70 EA. 1 1 17For replacement parts see page SP-12Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11STEEL HEAVY DUTY SPRING STEEL BUFFER SET35 155063 Nickel Plate 1 SET PER BOX 41DISCONTINUEDSet consists of 4 buffers and keepers for both side of door application. Advise if ordering for one-side application.STEEL DOOR SPRING ADJUSTABLE TENSION451 9" 228.6 mm 155371 D4 10.22 EA. 50 – 53452 11" 279.4 mm 155381 D4 12.33 EA. 25 – 34453 13" 330.2 mm 155401 D4 14.24 EA. 25 – 38Price Code 72SP-4

SP-5SPRING HINGESSTEEL FULL MORTISE DOUBLE ACTINGSIMPLEX BUTTJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHT1001 3" 155582 P 20.91 40 2 5072.20 mm155593 AP 23.08 40 2 50155581 1D 20.91 40 2 50155585 2C 26.01 40 2 50155587 3 29.31 40 2 50155583 4 26.01 40 2 50155584 10 26.01 40 2 50155594 10A 37.55 40 2 50155590 26 37.55 40 2 50155588 26D 33.20 40 2 504" 155633 P 22.03 24 2 45101.60 mm155644 AP 22.42 24 2 45155632 1D 22.03 24 2 45155636 2C 27.66 24 2 45155638 3 30.87 24 2 45155634 4 27.66 24 2 45155635 10 27.66 24 2 45155642 10A 39.87 24 2 45155641 26 39.87 24 2 45155639 26D 35.30 24 2 455" 155673 P 30.65 16 2 53127 mm155677 AP 33.50 16 2 53155672 1D 30.65 16 2 53155676 2C 38.07 16 2 53155678 3 42.64 16 2 53155674 4 38.07 16 2 53155675 10 38.07 16 2 53155684 10A 55.01 16 2 53155680 26 55.01 16 2 53155681 26D 48.78 16 2 536" 155712 P 33.50 12 2 56152.4 mm155716 AP 36.95 12 2 56155711 1D 33.65 12 2 56155715 2C 42.26 12 2 56155717 3 47.21 12 2 56155713 4 42.26 12 2 56155714 10 42.26 12 2 56155721 10A 60.70 12 2 56155719 26 60.70 12 2 56155720 26D 53.66 12 2 566" x 4 1 ⁄2" 155751 P 37.55 12 2 55152.4 mm x 114.30 mm155753 AP 42.49 12 2 55155758 1D 37.55 12 2 55155752 2C 46.84 12 2 55155762 3 50.28 12 2 55155756 4 46.84 12 2 55Price Code 72155755 10 46.84 12 2 55155760 10A 67.37 12 2 55SP-51.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

SP-6SPRING HINGESSTEEL FULL MORTISE DOUBLE ACTINGSIMPLEX BUTTJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHT1001 6" x 4 1 ⁄2" 155761 26 67.37 12 3 55continued 155754 26D 59.65 12 3 55Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11STEEL FULL MORTISE DOUBLE ACTING SIMPLEX BUTT NON-TEMPLATE9001 8" 158265 P 65.65 2 17203.2 mm158267 AP 72.47 2 17158264 1D 65.65 2 17158266 2C 80.79 2 17158273 3 92.40 2 17158274 4 80.79 2 17158275 10 80.79 2 17158277 10A 118.93 2 17158272 26 118.93 2 17158262 26D 104.46 2 17STEEL FULL MORTISE DOUBLE ACTING SIMPLEX CLAMP FLANGE BUTT19001 8" 159331 P 95.03 2 23203.20 mm159341 AP 103.04 2 23159317 1D 95.03 2 23159333 2C 118.25 2 23159337 3 134.06 2 23159335 4 118.25 2 23159336 10 118.25 2 23159338 10A 170.26 2 23159340 26 170.26 2 23159322 26D 152.58 2 23See page SP-12 for replacement parts.Price Code 72SP-6

SP-7SPRING HINGESSTEEL HALF SURFACE DOUBLE ACTINGSIMPLEX BUTTJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHTHS1001 3" 155787 P 20.91 20 2 2676.20 mm155795 AP 23.08 20 2 26155786 1D 20.91 20 2 26155788 2C 26.01 20 2 26155792 3 29.38 20 2 26155790 4 26.01 20 2 26155791 10 26.01 20 2 26155796 10A 37.55 20 2 26155797 26 37.55 20 2 26155794 26D 33.20 20 2 264" 155824 P 22.03 20 2 37101.60 mm155833 AP 22.41 20 2 37155823 1D 22.03 20 2 37155825 2C 27.66 20 2 37155828 3 30.87 20 2 37155832 4 27.66 20 2 37155830 10 27.66 20 2 37155834 10A 39.87 20 2 37155835 26 39.87 20 2 37155831 26D 35.30 20 2 37Price Code 72SP-71.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

SP-8SPRING HINGESAJAX DOUBLE ACTING HORIZONTALPIVOT HINGEJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHT3001 157076 P 42.49 8 1 SET 29157080 1D 42.49 8 1 SET 29157081 2C 46.69 8 1 SET 29157079 3 57.86 8 1 SET 29157077 4 52.08 8 1 SET 29157078 10 46.69 8 1 SET 29157085 10A 68.27 8 1 SET 29157086 26 68.27 8 1 SET 29157084 26D 61.37 8 1 SET 29AJAX DOUBLE ACTING HORIZONTAL PIVOT HINGE WITH JAMB ATTACHING PLATEJ3001 157116 P 41.75 10 1 SET 33157124 1D 45.94 10 1 SET 33157119 2C 51.04 10 1 SET 33157120 3 61.97 10 1 SET 33157117 4 51.04 10 1 SET 33157118 10 51.04 10 1 SET 33For concrete or 157121 10A 75.17 10 1 SET 33tile floor installation 157123 26 75.17 10 1 SET 33157122 26D 66.48 10 1 SET 33Price Code 72SP-83001 / J3001 SERIES each netTOP PIVOT & SOCKET $6.47JAMB ATTACHING PLATE* $11.55SIDE PLATE* $16.47BACK PLATE* $9.48*Specify finish when ordering.

SP-9SPRING HINGESSTEEL DOUBLE ACTING PIVOTSAGLESS GATE HINGEJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHT4007RB 157371 P 84.46 10 1 SET 35157376 1D 84.46 10 1 SET 35Reversed157373 2C 114.21 10 1 SET 35Brackets157378 3 139.46 10 1 SET 35157377 4 114.21 10 1 SET 35157374 10 114.21 10 1 SET 35157375 10A 177.39 10 1 SET 35157379 26 177.39 10 1 SET 35157372 26D 159.24 10 1 SET 354007-MRB 157403 P 84.46 10 1 SET 35Price Code 72MortisedBox andReversedBrackets157412 1D 84.46 10 1 SET 35157405 2C 114.21 10 1 SET 35157407 3 139.46 10 1 SET 35157408 4 114.21 10 1 SET 35157404 10 114.21 10 1 SET 35157409 10A 177.39 10 1 SET 35157411 26 177.39 10 1 SET 35157406 26D 159.17 10 1 SET 354007RB/4007-MRB Series Replacement PartsTENSION PIN $1.22SPRING $11.67NYLON BUSHINGS $.81TENSION RODS $1.11SP-91.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

SP-10SPRING HINGESLIGHT WEIGHT DOUBLE ACTINGGRAVITY PIVOT HINGESJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHT8007 158112 P 22.26 20 1 SET 25158116 1D 22.26 20 1 SET 25158114 2C 27.95 20 1 SET 25158115 3 31.70 20 1 SET 25158111 4 27.95 20 1 SET 25158113 10 27.95 20 1 SET 25158119 10A 40.02 20 1 SET 25158109 26 40.02 20 1 SET 25158118 26D 37.10 20 1 SET 25H8007 158152 P 26.01 20 1 SET 25158157 1D 26.01 20 1 SET 25158154 2C 32.75 20 1 SET 25158155 3 38.37 20 1 SET 25158156 4 25.94 20 1 SET 25158153 10 25.94 20 1 SET 25158158 10A 48.49 20 1 SET 25158160 26 48.49 20 1 SET 25158151 26D 45.34 20 1 SET 25No replacement parts are available.Price Code 72SP-10

SP-11SPRING HINGESSCHEDULE OF PARTS FOR MCKINNEY“HI-DUTY“ STEEL DOUBLE ACTINGSPRING HINGES TYPE A-CS1 HINGESJune 15, 2011Price Code 72PRICES FOR PARTS FOR TYPE A-CS1 HINGESWhen Ordering, Specify Finish for which Parts are Desired.H10-Clamp Frame $135.78H11-Jamb Frame $95.24*H12-H13-H14 $79.42**H15-Spring $14.67H16-Male Assembly $26.92H17-Hinge Pin $6.01H18-Tension Rivet $2.78H19-Set Screw $2.78*Must be furnished assembled.**H15 Spring unfinished Part # 159711, overall length is 7-15/16SP-111.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

SP-12SPRING HINGESREPLACEMENT PARTS FORSPRING HINGES AND PIVOTJune 15, 2011*Specify part number, size and finish when ordering.Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11REPLACEMENT PARTS FOR DOUBLE ACTING SPRING HINGES AND PIVOTSMcKINNEY Description 1001 1001 1001 1001 1001 9001 19001Finish Needed 3" 4" 5" 6" 6x4 1 ⁄2" 8" 8"Required Per HingeT53 - Spring 2 $8.66 $8.66 $8.66 $8.66 $14.40 $17.40 $28.79T56 Tension Pin 2 $1.39 $1.39 $1.39 $1.47 $1.47 $1.47 $1.61TS550 Solid Metal Cap X 4 $8.18 $8.18 $8.18 $12.23 $12.23 $15.86 $15.86TS510 Loose Knob X 2 $2.58 $2.58 $2.58 $3.21 $3.21 $3.99 $3.57TS520 Fast Knob 2 $2.58 $2.35 $2.23 $3.18 $3.21 $3.99 $3.99TS525 Pawlnut X 4 – – – – $3.21 – –TS530 Tension Lever 1 $1.39 $1.39 $1.39 $1.47 $1.47 $1.47 $1.61TS540 Plug X – – – $3.92 $3.92 – –Price Code 72SP-123001 / J3001 SERIESTOP PIVOT & SOCKET $7.97JAMB ATTACHING PLATE $14.25SIDE PLATE $20.34BACK PLATE $11.964007 / 4007 RB & MRB SERIESTENSION PIN $15.37SPRING $14.76NYLON BUSHINGS $1.00TENSION RODS $13.298007 / HS8007 SERIESNO REPLACEMENT PARTS ARE AVAILABLEREFER TO PAGE SP-11 FOR A-CS1 REPLACEMENT PARTS

MISC-1EMERGENCY & MISC. HARDWARECOMBINATION STOP AND STRIKEJune 15, 2011PRICE CASE CASEPRODUCT SIZE PART # FINISHEACH QUANTITY WEIGHTFOR CYLINDRICAL OR BORED LOCKSCSS-9May not work withmortise locks.Consult the factory formortise lock application.*Not for use withdeadboltBox and PlungerAssembly for CSS-9and DS-6$52.25Box only $6.30Springs only $.855 3 ⁄4" 146 mmCenter Hung 63309 10 122.79Center Hung 63330 26D 93.63Offset Hung 63310 10 122.79Offset Hung 63332 26D 93.635 7 ⁄8"Center Hung 63314 10 122.79Center Hung 63313 26D 93.63Offset Hung 63294 10 122.79Offset Hung 63293 26D 93.636 3 ⁄4" 171.40 mmCenter Hung 63331 26D 111.63Offset Hung 63312 10 122.79Offset Hung 63329 26D 122.79CUSTOM SIZES* $164.64EMERGENCY DOOR STOPAS ORDEREDAS ORDEREDAS ORDEREDDS-6 63337 10 90.73 20 1263345 26D 67.85 20 1263335 26 100.91 20 12DLS-8May not work withmortise locks.Consult the factoryfor mortise lockapplication.*Not for use withdeadbolt5 3 ⁄4" 146 mmCenter Hung 63260 10 45.52Center Hung 63315 26D 40.64 AS ORDEREDCenter Hung 63261 26 50.775 3 ⁄4" 146 mmOffset Hung 63317 10 45.52Offset Hung 63319 26D 44.70 AS ORDEREDOffset Hung 63262 26 50.776 3 ⁄4" 171.40 mmCenter Hung 63263 10 45.52Center Hung 63316 26D 40.64 AS ORDEREDCenter Hung 63264 26 50.776 3 ⁄4" 171.40 mmOffset Hung 63318 10 45.52Offset Hung 63320 26D 44.70 AS ORDEREDOffset Hung 63265 26 50.77Custom Sizes $65.94* Consult the factory for availability of custom sizesCustom Engineering and Set Up charges may applyPrice Code 11DOUBLE LIPPED STRIKEMISC-11.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

MISC-2EMERGENCY & MISC., HARDWARESTANDARD DUTY CENTER HUNGJAMB MOUNT PIVOT SETJune 15, 2011PRODUCT SIZE PART # FINISH PRICECASE BOX CASEQTY. QTY. WEIGHTEP-5J 63336 P $94.33 SET 20 1 SET 38– 3 $93.79 SET 20 1 SET 3863338 10 $103.06 SET 20 1 SET 38– 26 $93.79 SET 20 1 SET 3863346 26D $79.83 SET 20 1 SET 38Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11Price Code 11MISC-2

MISC-3FILLER PLATESJune 15, 2011PRODUCT PART # PRICEM400DF-25PK 77324 $61.58 / PK4 -1/2" Door Hinge Filler PlateFor beveled edge (handed) doors1-1/2" x 4-1/2" x .134 HRPO(2) 12-24 x 1/2" F.H.M.S.Finish powder coat gray primerPRODUCT PART # PRICEM401DF-25PK 77325 $61.58 / PK4 -1/2" Door Hinge Filler PlateFor square edge (non-handed) doors1-3/4" x 4-1/2" x .134 HRPO(2) 12-24 x 1/2" F.H.M.S.Finish powder coat gray primerPRODUCT PART # PRICEM402DF-25PK 77326 $61.58 / PK4 -1/2" Frame Filler PlateFor 1-3/4" rabbeted frames1-5/8" x 4-1/2" x .134 HRPO(2) 12-24 x 1/2" F.H.M.S.Finish powder coat gray primerPRODUCT PART # PRICEM100SF-25PK 77327 $49.61 / PKStrike Filler PlateFor ASA strike1-1/4" x 4-7/8" x .095 CRS(2) 12-24 x 1/2" F.H.M.S.Finish powder coat gray primerPRODUCT PART # PRICEM500DF-25PK 77329 $74.29 / PK5" Door Hinge Filler PlateFor beveled edge (handed) doors1-1/2" x 5" x .134 HRPO(2) 12-24 x 1/2" F.H.M.S.Finish powder coat gray primerNo Further Discounts ApplyPrice Code 84Sold in packs of 25 onlyPRODUCT PART # PRICEM501DF-25PK 77330 $74.29 / PK5" Door Hinge Filler PlateFor square edge (non-handed) doors1-3/4" x 5" x .134 HRPO(2) 12-24 x 1/2" F.H.M.S.Finish powder coat gray primerPRODUCT PART # PRICEM502DF-25PK 77331 $74.29 / PK5" Frame Filler PlateFor 1-3/4" rabbeted frames1-5/8" x 5" x .134 HRPO(2) 12-24 x 1/2" F.H.M.S.Finish powder coat gray primerPRODUCT PART # PRICEM101SF-25PK 77332 $34.65 / PKStrike Filler PlateFor ASA dead lock strike, no lip1-1/4" x 4-7/8" x .095 CRS(2) 12-24 x 1/2" F.H.M.S.Finish powder coat gray primerPRODUCT PART # PRICEM160SF-25PK 77333 $45.99 / PKStrike Filler PlateFor government 160 T - strike11-1/8" x 2-3/4" x .075 GALVN(2) 8-32 x 1/2" F.H.M.S.Finish powder coat gray primerPRODUCT PART # PRICEM161LF-25PK 77335 $42.53 / PKStrike Filler PlateDeadlock Strke1-1/8" x 2-1/4" x .083 CRS(2) 8-32 x 1/2" F.H.M.S.Finish powder coat gray primerMISC-31.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

MISC-4FILLER PLATES& FACE FILLERSJune 15, 2011PRODUCT PART # PRICEM86DF-25PK 77336 $176.93 / PKDoor Edge Filler PlateFor government 86 mortise lock face1-1/4" x 8" x .187 HRPO(2) 12-24 x 1/2" F.H.M.S.Finish powder coat gray primerCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT PART # PRICEM160FD-25PK 77337 $73.50 / PKDoor Face Filler*Sold in packs of 25 onlyNo Further Discounts ApplyPrice Code 84Sold in packs of 25 onlyMISC-4For 1-1/2" cylinder holes1-3/4" dia. x .049 GALVN(1) 8-32 thru boltFinish powder coat gray primerPRODUCT PART # PRICEM161FC-25PK 77338 $42.47 / PKDoor Face FillerFor 160 & 161 cylinder holes2-5/8" dia. x .049 GALVN(1) 8-32 thru boltFinish powder coat gray primer

MISC-5HINGE REINFORCEMENTS& SHIMSJune 15, 2011PRODUCT PART # PRICEM45RW-50PK 77339 $226.38 / PK4-1/2" Hinge ReinforcementFor 4-1/2" x .134 regular weight hinges1-1/4" x 9" x .187 HRPOHoles tapped 12-24Fits doors and framesPRODUCT PART # PRICEM55RW-50PK 77343 $227.33 / PK5" Hinge ReinforcementFor 5" x .134 regular weight hinges1-1/4" x 9" x .187 HRPOHoles tapped 12-24Fits doors and framesPRODUCT PART # PRICEM45HW-50PK 77340 $227.33 / PK4-1/2" Hinge ReinforcementFor 4-1/2" x .180 heavy weight hinges1-1/4" x 9" x .187 HRPOHoles tapped 12-24Fits doors and framesAdd MB-50PK after part no. if Mortar Box is requiredNo Further Discounts ApplyPrice Code 84Sold in packs of 50 only$52.08 / PKPRODUCT PART # PRICEM44S-50PK 77341 $28.30 / PK16 Gauge 4-1/2" Hinge Shim1 – 7/16" x 4-1/2" x .065 GALVN steelPRODUCT PART # PRICEM42S-50PK 77342 $28.30 / PK22 Gauge 4-1/2" Hinge Shim1 – 7/16" x 4-1/2" x .028 GALVN steelPRODUCT PART # PRICEM55HW-50PK 77344 $227.33 / PK5" Hinge ReinforcementFor 5" x .180 heavy weight hinges1-1/4" x 9" x .187 HRPOHoles tapped 12-24Fits doors and framesPRODUCT PART # PRICEM54S-50PK 77345 $31.13 / PK16 Gauge 5" Hinge Shim1 – 7/16" x 5" x .065 GALVN steelPRODUCT PART # PRICEM52S-50PK 77346 $35.39 / PK22 Gauge 5" Hinge Shim1 – 7/16" x 5" x .028 GALVN steelMISC-51.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

SPEC-1SPECIALTY HINGESJune 15, 2011POCKET HINGEPRODUCT SIZE PART # FINISHPRICE CASE CASEEACH QUANTITY WEIGHTPH-4 63531 P 178.89FOR NARROW 63532 AP 183.62STILE 63533 3 227.1963534 4 183.6263535 10 183.6263536 10A 227.19 AS ORDERED63537 10B 227.1963538 26 227.1963539 26D 148.7763540 D3 183.6263541 D4 183.62STORMPRO® TORNADO RESISTANT HINGESPRODUCT SIZE PART # FINISHPRICE BOX CASE CASEEACH QUANTITY QUANTITY WEIGHTSP3386 4½" x 4½"114.30mm x 114.30mm 73972 32D 85.05 3 24 375" x 4½" 73982 32D 86.00 3 24 43127mm x 114.30mmSP3786 4½" x 4½"114.30mm x 114.30mm 73970 P 38.64 3 24 3573971 26D 41.91 3 24 355" x 4½" 73980 P 44.51 3 24 41127mm x 114.30mm 73981 26D 46.82 3 24 41All StormPro ® products should be ordered as a complete integrated unit including the frame and door along with otherStormPro ® hardware. StormPro ® hinges are a required component of the certified StormPro ® system.Price Code 11 for PH-4, Code 50 for Storm Pro HingesSPEC-11.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

DH-12K Architectural Hinge*2K Hinges are handed RH or LHJune 15. 2011ProductPart NumberLHRHTipPrefixHingeTypeHingeSizeHinge Finish BookHinge Tips PriceD4 x US15 28.36D4 x US26 28.36D4 x US26D 28.36D4 x D4 28.36FTMK78000MK78001FTRTT2731 4" x 4"US15 x D4 29.25US26 x D4 31.48US26D x D4 29.25US15 x US15 29.25US26 x US26D 31.48US26D x US26 29.25RTMK78002MK78004MK78003MK78005FTRTFTRTT2731 4.5" x 4"T2731 4.5" x 4.5"US26 x US26 31.48US26D x US26D 29.25D4 x US15 28.38D4 x US26 28.38D4 x US26D 28.38D4 x D4 28.38US15 x D4 31.41US26 x D4 34.09US26D x D4 31.41US15 x US15 31.41US26 x US26D 34.09US26D x US26 31.41US26 x US26 34.09US26D x US26D 31.41D4 x US15 28.36D4 x US26 28.36D4 x US26D 28.36D4 x D4 28.36US15 x D4 29.25US26 x D4 31.48US26D x D4 29.25US15 x US15 29.25US26 x US26D 31.48US26D x US26 29.25US26 x US26 31.48US26D x US26D 29.25DH-11.800.346.7707 • PRICE BOOK Copyright © 2010-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

DH-22K Architectural Hinge*2K Hinges are handed RH or LHJune 15. 2011ProductPart NumberLHRHTipPrefixHingeTypeHingeSizeHinge Finish BookHinge Tips PriceD4 x US15 40.32D4 x US26 40.32D4 x US26D 40.32D4 x D4 40.32FTMK78010MK78011FTRTTA2731 4.5" x 4"US15 x D4 42.64US26 x D4 48.45US26D x D4 42.64US15 x US15 42.64US26 x US26D 48.48US26D x US26 42.64Copyright © 2010-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.RTMK78012MK78014MK78013MK78015FTRTFTRTTA2731 4.5" x 4.5"TA2731 5" x 5"US26 x US26 48.48US26D x US26D 42.64D4 x US15 40.32D4 x US26 40.32D4 x US26D 40.32D4 x D4 40.32US15 x D4 42.64US26 x D4 48.45US26D x D4 42.64US15 x US15 42.64US26 x US26D 48.48US26D x US26 42.64US26 x US26 48.48US26D x US26D 42.64D4 x US15 56.12D4 x US26 56.12D4 x US26D 56.12D4 x D4 56.12US15 x D4 60.60US26 x D4 68.16US26D x D4 60.60US15 x US15 60.60US26 x US26D 68.16US26D x US26 60.60US26 x US26 68.16US26D x US26D 60.606/15/11DH-2

DH-33K Architectural HingeJune 15. 2011ProductPart NumberTipPrefixHingeTypeHingeSizeHinge Finish BookHinge Tips PriceD4 x US15 26.09D4 x US26 26.09D4 x US26D 26.09D4 x D4 26.09FTMK78016FTRTT714 4" x 4"US15 x D4 27.79US26 x D4 28.64US26D x D4 27.79US15 x US15 27.79US26 x US26D 28.64US26D x US26 27.79RTMK78017MK78018MK78019FTRTFTRTFTRTT714 4.5" x 4"T714 4.5" x 4.5"T714 5" x 5"US26 x US26 28.64US26D x US26D 27.79D4 x US15 28.30D4 x US26 28.30D4 x US26D 28.30D4 x D4 28.30US15 x D4 30.52US26 x D4 33.08US26D x D4 30.52US15 x US15 30.52US26 x US26D 33.08US26D x US26 30.52US26 x US26 33.08US26D x US26D 30.52D4 x US15 28.30D4 x US26 28.30D4 x US26D 28.30D4 x D4 28.30US15 x D4 30.52US26 x D4 33.08US26D x D4 30.52US15 x US15 30.52US26 x US26D 33.08US26D x US26 30.52US26 x US26 33.08US26D x US26D 30.52D4 x US15 43.65D4 x US26 43.65D4 x US26D 43.65D4 x D4 43.65US15 x D4 44.93US26 x D4 52.95US26D x D4 44.93US15 x US15 44.93US26 x US26D 52.95US26D x US26 44.93US26 x US26 52.95US26D x US26D 44.93DH-31.800.346.7707 • PRICE BOOK Copyright © 2010-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

DH-43K Architectural HingeJune 15. 2011ProductPart NumberTipPrefixHingeTypeHingeSizeHinge Finish BookHinge Tips PriceD4 x US15 39.13D4 x US26 39.13D4 x US26D 39.13D4 x D4 39.13FTMK78020FTRTTA714 4" x 4"US15 x D4 38.94US26 x D4 43.65US26D x D4 38.94US15 x US15 38.94US26 x US26D 43.65US26D x US26 38.94Copyright © 2010-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11DH-4RTMK78021MK78022MK78023FTRTFTRTFTRTTA714 4.5" x 4"TA714 4.5" x 4.5"TA714 5" x 5"US26 x US26 43.65US26D x US26D 38.94D4 x US15 40.07D4 x US26 40.07D4 x US26D 40.07D4 x D4 40.07US15 x D4 37.49US26 x D4 40.64US26D x D4 37.49US15 x US15 37.49US26 x US26D 40.64US26D x US26 37.49US26 x US26 40.64US26D x US26D 37.49D4 x US15 40.07D4 x US26 40.07D4 x US26D 40.07D4 x D4 40.07US15 x D4 37.49US26 x D4 40.64US26D x D4 37.49US15 x US15 37.49US26 x US26D 40.64US26D x US26 37.49US26 x US26 40.64US26D x US26D 37.49D4 x US15 53.54D4 x US26 53.54D4 x US26D 53.54D4 x D4 53.54US15 x D4 53.97US26 x D4 65.23US26D x D4 53.97US15 x US15 53.97US26 x US26D 65.23US26D x US26 53.97US26 x US26 65.32US26D x US26D 53.97

DH-55K Architectural Hinge*5K Architectural Hinges only available with Standard Pin and Plug.June 15. 2011ProductPart NumberHingeTypeHingeSizeMK78024 T2714 4" x 4"MK78025 T2714 4.5" x 4"MK78026 T2714 4.5" x 4.5"MK78019 T2714 5" x 5"Hinge Finish BookHinge Tips* PriceD4 x US15 16.90D4 x US26 16.90D4 x US26D 16.90D4 x D4 16.90US15 x D4 16.88US26 x D4 18.01US26D x D4 16.88US15 x US15 16.88US26 x US26D 18.01US26D x US26 16.88US26 x US26 18.01US26D x US26D 16.88D4 x US15 19.46D4 x US26 19.46D4 x US26D 19.46D4 x D4 19.46US15 x D4 18.85US26 x D4 20.67US26D x D4 18.85US15 x US15 18.85US26 x US26D 20.67US26D x US26 18.85US26 x US26 20.67US26D x US26D 18.85D4 x US15 19.46D4 x US26 19.46D4 x US26D 19.46D4 x D4 19.46US15 x D4 18.85US26 x D4 20.67US26D x D4 18.85US15 x US15 18.85US26 x US26D 20.67US26D x US26 18.85US26 x US26 20.67US26D x US26D 18.85D4 x US15 32.00D4 x US26 32.00D4 x US26D 32.00D4 x D4 32.00US15 x D4 32.85US26 x D4 40.27US26D x D4 32.85US15 x US15 32.85US26 x US26D 40.27US26D x US26 32.85US26 x US26 40.27US26D x US26D 32.85DH-51.800.346.7707 • PRICE BOOK Copyright © 2010-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

Copyright © 2010-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11DH-65K Architectural Hinge*5K Architectural Hinges only available with Standard Pin and Plug.June 15. 2011DH-6ProductPart NumberHingeTypeHingeSizeMK78028 TA2714 4" x 4"MK78029 TA2714 4.5" x 4"MK78030 TA2714 4.5" x 4.5"MK78031 TA2714 5" x 5"Hinge Finish BookHinge Tips* PriceD4 x US15 27.22D4 x US26 27.22D4 x US26D 27.22D4 x D4 27.22US15 x D4 24.47US26 x D4 30.38US26D x D4 24.47US15 x US15 24.47US26 x US26D 30.38US26D x US26 24.47US26 x US26 30.48US26D x US26D 24.47D4 x US15 27.97D4 x US26 27.97D4 x US26D 27.97D4 x D4 27.97US15 x D4 25.88US26 x D4 28.54US26D x D4 25.88US15 x US15 25.88US26 x US26D 28.54US26D x US26 25.88US26 x US26 28.54US26D x US26D 25.88D4 x US15 27.97D4 x US26 27.97D4 x US26D 27.97D4 x D4 27.94US15 x D4 25.88US26 x D4 28.54US26D x D4 25.88US15 x US15 25.88US26 x US26D 28.54US26D x US26 25.88US26 x US26 28.54US26D x US26D 25.88D4 x US15 38.91D4 x US26 38.91D4 x US26D 38.91D4 x D4 38.91US15 x D4 40.95US26 x D4 43.94US26D x D4 40.95US15 x US15 40.95US26 x US26D 43.94US26D x US26 40.95US26 x US26 43.94US26D x US26D 40.95

RES-1RESIDENTIAL GRADE HINGESSTEEL LIGHT WEIGHTJune 15, 2011PRODUCT SIZE PART # FINISH1400 3 1 ⁄2" x 3 1 ⁄2" 56688 P 1.14 50 2 2688.90 mm x 88.90 mm56695 3 4.15 50 2 2656689 4 1.14 50 2 2656683 10B* 4.15 50 2 2656692 26 4.15 50 2 2656288 26D 1.93 50 2 2656291 D4 1.50 50 2 264" x 4" 56737 10B* 4.77 50 2 5256748 26D 2.79 50 2 52StaggeredHole PatternResidential Hinges available only in finishes shown above.Contract Grade Hinge Discount does not apply to Residential Grade HingesNOTE:Unlisted finishes for residential hinges P.O.A.Consult the Factory on minimum requirements.* Residential Grade finish 10BPrice Code 14PRICE CASE BOX CASEEACH QTY. QTY. WEIGHTRES-11.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

RES-2RESIDENTIAL GRADE HINGESSTEEL LIGHT WEIGHT1/4” RD ROUND CORNERJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHT1414 3 1 ⁄2" x 3 1 ⁄2" 56816 P 1.14 50 2 2688.90 mm x 88.90 mm56722 3 4.15 50 2 2656815 4 1.14 50 2 2656716 10B* 4.15 50 2 2656831 15 2.31 50 2 2656719 26 4.15 50 2 2656821 26D 1.93 50 2 2656324 D3 1.14 50 2 2656725 D4 1.37 50 2 264" x 4" 56806 P 1.65 50 2 52101.60 mm x 101.60 mm56775 3 5.01 50 2 5256768 4 1.65 50 2 5256769 10B* 5.01 50 2 2656772 26 5.01 50 2 5256773 26D 2.79 50 2 52Hole Pattern56335 D3 1.65 50 2 5256778 D4 2.16 50 2 52Residential Hinges available only in finishes shown above.Contract Grade Hinge Discount does not apply to Residential Grade HingesNOTE: Unlisted finishes for residential hinges P.O.A.Consult the Factory on minimum requirements.*Residential grade 10B FinishPrice Code 14RES-2

RES-3RESIDENTIAL GRADE HINGESSTEEL LIGHT WEIGHT 5/8" RD ROUNDJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CASE BOX CASEEACH QTY. QTY. WEIGHT1458 3 1 ⁄2" x 3 1 ⁄2" 56863 P 1.50 50 2 2688.90 mm x 88.90 mm56870 3 4.15 50 2 2656865 4 1.14 50 2 2656861 10B* 4.15 50 2 2656860 15 1.94 50 2 2656867 26 4.95 50 2 2656868 26D 1.93 50 2 264" x 4" 56915 10B* 5.01 50 2 52101.60mm x 101.60mm56922 26D 2.79 50 2 52Hole PatternResidential Hinges available only in finishes shown above.Contract Grade Hinge Discount does not apply to Residential Grade HingesNOTE: Unlisted finishes for residential hinges P.O.A.Consult the Factory on minimum requirements.*Residential grade 10B FinishPrice Code 14RES-31.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-1CONTINUOUS HINGESALUMINUMJune 15, 2011PListing: R12248C US McKINNEY aluminum continuous hinges have been tested and certified by Underwriters Laboratories, Inc.( (U.S.A. and Canada) for up to a 3-hour (A Label) Fire Listing for all 4'0" x 10'0" and 8'0"x 10'0" door andLISTEDframe assemblies. Fire listing certification applies to all approved hollow metal and wood door assemblies indry wall or masonry wall construction. No special preparations are required for up to 90 minutes. Fire Pins, which also increasethe security of the door are required for 3-hour applications. Fire Pin applications fall within the UL guidelines for retrofittingassemblies in the field. Cutting the hinge in the field will not void the UL listing. Drilling locations for Fire Pins are found oneach template. The most up to date templates are found on our web site at www.mckinneyhinge.comAll models are approved for UL retrofit applications per NFPA 80.These hinges conform to ANSI / BHMA Standard A156.26-2000:Grade 2-150 (150 # Door @1,500,000 cycles) Grade 2-300 (300 # door @ 500,000 cycles)Grade 1-300 (300 # Door @ 1,000,000 cycles ) Grade 1-600 (600 # Door @ 500,000Available Options:(Consult individual pages for availability of option with profile listed)• Current Carrying Hinges: Each QC4 conductor flat cable will carry 4 amps at 24 volts with a 16 amp in rush current for300 milliseconds. The electrical prep is provided with a 4 amp in-line fuse to protect the cable from any overload or surgein power. When ordering, please specify where the modification is to be located from the top of the hinge down to thecenterline of prep. Handing is required on all hinges provided with electrical modifications. Flat cable conductor iswarranted for 5 years. Flat plug connectors are included at each leaf for ease of electrical connection.Each electricalprep is supplied with a 36" and 72" wire harness. QC hinges are available with the additional options, SER (Serviceable)and ACC (Accessible)• MM – Magnetic Monitoring Transfer also available with SER and ACC Options.• QC – Electrolynx Connectors also available with SER (Serviceable) and ACC (Accessible) Options.• EPT – Power Transfer Prep (Cut Out Only) for Von Duprin. See page CG27 for location template. This template must befilled out and included with your order.• PT – Power Transfer Prep (Cut Out Only) – for Securitron, Yale, Centurion, Dorma or Adams Rite. Refer to page CG26for location template. This template must be filled out and included with your order.• Custom Cut to Length (Hinges may be field cut and not void listing. Field-Cut hinges should be cut from bottom)• Fire Pins Kit – While hinges are rated without fire pins up to 90 minutes, 3-hour ratings require the use of fire pins.Fire pin kit consists of 4 each for 80-95 inch hinges and 5 each for 96 to 120 inch hinges, as well as the installationinstructions on what size holes to drill after the hinges have been installed.• Hospital Type Tips are available on full mortise hinges• Specify “K” pre-fix for Kawneer Tufline series aluminum Doors on our MCK-12HD Series, order as K-MCK-12HD andinclude size and finish• Painted ColorsGear Cap Only - Batch charge and additional charge per hingeComplete Hinge - Batch charge and additional charge per hinge (minimum run 20 hinges) POALengthsMcKINNEY aluminum continuous gear hinges are listed and priced here in 79", 83", 85", 95" and 120" actual lengths forease of installation on standard nominal door openings. The actual length of the hinge provides for head and threshold clearance.Custom lengths may be ordered as a special run. Consult the factory regarding minimum requirements and non-cancellationpolicy on custom lengths.Hinges may be cut to appropriate length in the field. The hinge should be installed with the cut side on the bottom. Cutting inthe field does not void the listing. We recommend that after removing cap, a saw blade be used to score and always begin cut atgear head. Never at leaves.Cut only from bottom of hinge. Do not cut through bearings or screw holes.CG-11.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-2CONTINUOUS HINGESALUMINUM CONTINUOUS HINGECLEARANCE DIMENSIONSThe full-mortise units are designed mainly for new doors and frames, and are applied so as to conceal both leaves. In retrofitapplications, the door width must be reduced for proper clearance (See Figures 1, 2, 3 and 4 below for proper clearance).The full-surface units are designed mainly for retrofit work, and are applied to the exposed surface of the door and frame(See Figures 1 & 2 below for proper clearance).June 15, 2011The half-surface units are designed mainly for retrofit applications. The door leaf is applied to the exposed surface of the door,and the frame leaf is applied to the concealed surface of the frame rabbet (See Figures 1 & 2 below for proper clearance).ALL 1/8"ALL 1/8"Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11Full Mortise5/16"Full Surface0 to 1/8"Half Surface1/8"Figure 1 – TypicalFull Mortise / Raised GearWide Throw (w/SquareEdge Door) 5/16"Wide Throw (w/Beveled 3/8"Edge DoorResidential 1-3/4" 1/4"Full Mortise Safety(w/Square Edge Door) 9/16"Full Mortise Safety(w/Beveled Edge Door) 5/8"Raised Gear 11/32"(w/Beveled Edge Door)CG-2ALL 1/8"Full Mortise5/16"Full Surface0 to 1/8"Half Surface1/8"ALL1/8" to3/16"* Allow extra clearance as required per astragal manufacturerFull Mortise / Raised GearWide Throw (w/SquareEdge Door) 5/16"Wide Throw (w/Beveled 3/8"Edge DoorResidential 1-3/4"Raised Gear w/Beveled Edge Door 11/32"Full Mortise Safety 9/16"(w/Square Edge Door)Full Mortise Safety 5/8"(w/Beveled Edge Door)ALL 1/8"Figure 4 – TypicalALL 1/8"Figure 3 – Typical* Allow extra clearance as required per astragal manufacturerFigure 2 – TypicalALL 1/8"Full Mortise / Raised GearWide Throw (w/Square5/16" Edge Door)3/8" Wide Throw (w/BeveledEdge Door1/4" Residential 1-3/4"Full Mortise5/16"Full Surface0 to 1/8"Half Surface1/8"9/16" Full Mortise Safety(w/Square Edge Door)5/8" Full Mortise Safety (w/Beveled Edge Door)11/32" Raised Gear (w/Beveled Edge Door)

CG-3CONTINUOUS HINGESFULL MORTISE EDGE HUNGFLUSH DOORJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CARTON CARTONEACH QUANTITY WEIGHTMCK-12HD 79" 76716 CLEAR 86.73 1 8Heavy Duty 79" 76741 BRONZE 112.17 1 883" 76717 CLEAR 86.73 1 883" 76742 BRONZE 112.17 1 885" 76718 CLEAR 88.11 1 885" 76743 BRONZE 113.62 1 895" 76719 CLEAR 104.33 1 995" 76744 BRONZE 137.82 1 9120" 76720 CLEAR 168.16 1 11120" 76745 BRONZE $210.98 1 11MCK-WTHD 83" 76822 CLEAR 191.89 1 8Heavy Duty 83" 76823 BRONZE 277.31 1 895" 76824 CLEAR 277.31 1 895" 76825 BRONZE 362.68 1 8For Kawneer Tuffline Series Aluminum Doors, pre-fix the MCK-12HD series with “K”, example 83" K-MCK-12HD CLK-MCK-12HD 83" 76826 CLEAR $86.73Available Options:Option (Suffix) Each Net AddG Gold Anodized Finish Price Same as BronzeBL Black Anodized Finish Price 20% over BronzeQC-4 Conductor Flat Cable* $175.07QC-8 Conductor Flat Cable* $200.08QC-12 Conductor Flat Cable* $268.79SER-4 Conductor Flat Cable* $193.25SER-8 Conductor Flat Cable* $224.99SER-12 Conductor Flat Cable* $296.10ACC-4 Conductor Flat Cable* $193.25ACC-8 Conductor Flat Cable* $224.99ACC-12 Conductor Flat Cable* $296.10MM* $118.79SER-MM $145.04EPT (Prep Only for Von Duprin)*+ $58.44PT (Prep Only)*+ $58.44HT (Hospital Type Tip)* $65.03Custom Cut to Length* $10.01Fire Pin Kit $24.54Dutch Door Prep* $46.15Painted ColorsGear Cap Only - P.O.AComplete Hinge - P.O.A.Heavy Duty Wide ThrowMCK-12DH ShowMCK-WTHD ShowWhen ordering advise location for electrical options from top of hinge to centerline of electrical prep location. Handing is requiredfor ALL hinges with electrical prep. Electrical prep is provided with a 4 amp in-line fuse to protect the cable from any overload orsurge in power. Consult page CG-2 for clearance dimensions. Gold or other custom finishes may have 6-8 week lead time.* Handing Required+Refer to pages CG26 and CG27 for the appropriate power transfer Locator template. This template must be filled out andincluded with your order.Price Code 801 Each QC pigtail is packed with QC4 & QC8. 2 Each QC pigtailsare packed with QC12. For an additional 6" pigtail order:MCKHC-6/4 (4 wire) @ $21.48 eachMCKHC-6/8 (8 wire) @ $33.03 eachFor QC12 order 1 each of the above @$54.50Fastener Kits (one kit required for up to 95" and 2 for 120"FMK-CL 71502 ......$19.53FMK-BZ 71503 .....$19.53CG-31.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-4CONTINUOUS HINGESFULL MORTISE EDGE HUNGINSET DOORJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CARTON CARTONEACH QUANTITY WEIGHTMCK-14HD 79" 76751 CLEAR 88.11 1 8Heavy Duty 79" 76776 BRONZE 114.65 1 883" 76752 CLEAR 88.11 1 883" 76777 BRONZE 114.65 1 885" 76753 CLEAR 89.54 1 885" 76778 BRONZE 116.09 1 895" 76754 CLEAR 106.88 1 995" 76779 BRONZE 140.71 1 9120" 76755 CLEAR 174.90 1 11120" 76780 BRONZE 227.99 1 11Option (Suffix)Each Net AddG Gold Anodized Finish Price Same as BronzeBL Black Anodized Finish Price 20% over BronzeQC-4 Conductor Flat Cable* $175.07QC-8 Conductor Flat Cable* $200.08QC-12 Conductor Flat Cable* $268.79SER-4 conductor Flat Cable* $193.25SER-8 conductor Flat Cable* $224.99SER-12 conductor Flat Cable* $296.10ACC-4 Conductor Flat Cable* $193.25ACC-8 Conductor Flat Cable* $224.99ACC-12 Conductor Flat Cable* $296.10MM* $118.79SER-MM $145.04EPT (Prep Only for Von Duprin)*+ $58.44PT (Prep Only)*+ $58.44HT (Hospital Type Tip)* $65.03Custom Cut to Length* $10.01Fire Pin Kit $24.54Painted Colors: $46.15Gear Cap Only - P.O.A.Complete Hinge - P.O.A.Available Options:When ordering, advise location for electrical options from top of hinge to centerline of electrical prep. Handing is required forALL hinges with electrical prep. Electrical prep is provided with a 4 amp in-line fuse to protect the cable from any overload orsurge in power. Consult page CG-2 for clearance dimensions. Gold or other custom finishes may have 6-8 week lead time.* Handing Required+Refer to pages CG26 and CG27 for the appropriate power transfer Locator template. This template must be filled out andincluded with your order.Price Code 80CG-41 Each QC pigtail is packed with QC4 & QC8. 2 Each QC pigtailsare packed with QC12. For an additional 6" pigtail order:MCKHC-6/4 (4 wire) @ $21.48 eachMCKHC-6/8 (8 wire) @ $33.03 eachFor QC12 order 1 each of the above @$54.50Fastener Kits (one kit required for up to 95" and 2 for 120"FMK-CL 71502 ......$19.53FMK-BZ 71503 .....$19.53

CG-5CONTINUOUS HINGESFULL SURFACEJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CARTON CARTONEACH QUANTITY WEIGHTMCK-22HD 79" 76771 CLEAR 145.12 1 11Heavy Duty 79" 76796 BRONZE 202.20 1 1183" 76772 CLEAR 145.12 1 1183" 76797 BRONZE 202.20 1 1185" 76773 CLEAR 146.56 1 1185" 76798 BRONZE 204.27 1 1195" 76774 CLEAR 182.11 1 11 1 ⁄295" 76799 BRONZE 250.34 1 11 1 ⁄2120" 76775 CLEAR 271.25 1 14120" 76800 BRONZE 372.97 1 14Complete installation hardware kit which includes 12-24 x 7/16" self-drilling, 410 SS, Flathead Phillips, under cutscrews for frame leaf, and thru bolts and shoulder screws for the door leaf are provided as standard pack unlessotherwise specified.Available Options:OptionEach Net AddG Gold Anodized Finish Price Same as BronzeBL Black Anodized Finish Price 20% over BronzeQC-4 Conductor Flat Cable* $333.90QC-8 Conductor Flat Cable* $456.33QC-12 Conductor Flat Cable* $701.19Custom Cut to Length* $10.00HT (Hospital Type Tip)* $65.03Fire Pin Kit $24.54Painted Colors:Gear Cap Only - P.O.A.Complete Hinge - P.O.A.C1 Replacement Cover for MCK-22HD Clear $30.40 Net NetD1 Replacement Cover for MCK-22HD Bronze $30.40 Net NetGold or other custom finishes may have 6-8 week lead time.Hinges are rated up to 90 minute opening, for 3 hour rating firepins are required. Shop modification or door/framereinforcements are not required for fire pin installation.Fire pins also add extra security to the opening.* Handing RequiredPrice Code 801 Each QC pigtail is packed with QC4 & QC8.2 Each QC pigtails are packed with QC12.For an additional 6" pigtail order:MCKHC-6/4 (4 wire) @ $21.48 eachMCKHC-6/8 (8 wire) @ $33.03 eachFor QC12 order 1 each of the above @$54.50Fastener Kits (one kit required for up to 95" and2 for 120"FSHSK-CL 77350 ......$27.30FSHSK-BZ 77351 ......$27.30CG-51.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-6CONTINUOUS HINGESFULL MORTISE EDGE HUNGCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHMCK-25HD 79" 76706 CLEAR 90.37 1 9Heavy Duty 79" 76731 BRONZE 109.28 1 983" 76707 CLEAR 92.37 1 983" 76732 BRONZE 110.80 1 985" 76708 CLEAR 95.39 1 985" 76733 BRONZE 115.41 1 995" 76709 CLEAR 118.47 1 1095" 76734 BRONZE 132.74 1 10120" 76710 CLEAR 176.34 1 15120" 76735 BRONZE 199.38 1 15Option (Suffix)Each Net AddG Gold Anodized Finish Price Same as BronzeBL Black Anodized Finish Price 20% over BronzeQC-4 Conductor Flat Cable* $175.07QC-8 Conductor Flat Cable* $200.08QC-12 Conductor Flat Cable* $268.79SER-4 Conductor Flat Cable* $193.25SER-8 Conductor Flat Cable* $224.99SER-12 Conductor Flat Cable* $296.10ACC-4 Conductor Flat Cable* $193.25ACC-8 Conductor Flat Cable* $224.99ACC-12 Conductor Flat Cable* $282.00MM* $296.10SER-MM $118.79EPT (Prep Only for Von Duprin)*+ $145.04PT (Prep Only)*+ $58.44HT (Hospital Type Tip)* $58.44Custom Cut to Length* $10.01Fire Pin Kit $24.54Dutch Door Prep $46.15HT (Hospital Tip) $65.03Painted Colors:Gear Cap Only - P.O.A.Complete Hinge - P.O.A.Available Options:PRICE CARTON CARTONEACH QUANTITY WEIGHTAdvise location for electrical options from top of hinge to centerline of electrical prep. Handing is required for ALL hinges withelectrical prep. Electrical prep is provided with a 4 amp in-line fuse to protect the cable from any overload or surgein power. Consult page CG-2 for clearance dimensions. Gold or other custom finishes may have 6-8 week lead time.* Requires Handing+Refer to pages CG26 and CG27 for the appropriate power transfer Locator template. This template must be filled out andincluded with your order.Price Code 80CG-6June 15, 20111 Each QC pigtail is packed with QC4 & QC8.2 Each QC pigtails are packed with QC12.For an additional 6" pigtail order:MCKHC-6/4 (4 wire) @ $21.48 eachMCKHC-6/8 (8 wire) @ $33.03 eachFor QC12 order 1 each of the above @$54.50Fastener Kits (one kit required for up to 95" and2 for 120"FMK-CL 71502 ......$19.53FMK-BZ 71503 ......$19.53

CG-7CONTINUOUS HINGESFULL MORTISE, RAISED GEARJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CARTON CARTONEACH QUANTITY WEIGHTMCK-28HD 83" 76920 CLEAR $128.83 1 10Heavy Duty 83" 76924 BRONZE $157.06 1 1085" 76921 CLEAR 136.72 1 1085" 76925 BRONZE $158.45 1 1095" 76922 CLEAR $157.64 1 1195" 76926 BRONZE $193.88 1 11120" 76923 CLEAR $242.88 1 14120" 76927 BRONZE 249.26 1 14To order, specify length and finish. Hinges are supplied with # 12-24 x 7/16 Flat Head Undercut, Type C,thread-forming screws.OptionEach Net AddCustom Cut to Length* $10.00Fire Pin Kit $24.54Painted Colors:Gear Cap OnlyP.O.AComplete HingeP.O.A.* Requires HandingFire Pins are required on 3 hour rated doors only.Available Options:Full Mortise Safety HingesMCK-35HD ......Refer to CG-3 for pricingMCK-38HD ......Refer to CG-3 for pricingPrice Code 80CG-71.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-8CONTINUOUS HINGESHALF SURFACE, RAISED GEARJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT SIZE PART # FINISHPRICE CARTON CARTONEACH QUANTITY WEIGHTMCK-54HD 79" 76761 CLEAR 135.28 1 10Heavy Duty 79" 76786 BRONZE 164.85 1 1083" 76762 CLEAR 135.28 1 1083" 76787 BRONZE 164.92 1 1085" 76763 CLEAR 136.73 1 1085" 76788 BRONZE 166.37 1 1095" 76764 CLEAR 165.54 1 1195" 76789 BRONZE 203.57 1 11120" 76765 CLEAR 255.02 1 14120" 76790 BRONZE 329.36 1 14Complete installation hardware kit which includes 12-24 x 7/16" self-drilling, 410 SS, Flathead Phillips, under cutscrews for frame leaf, and thru bolts and shoulder screws for the door leaf are provided as standard pack unlessotherwise specified.Available Options:OptionEach Net AddG Gold Anodized Finish Price Same as BronzeBL Black Anodized Finish Price 20% over BronzeQC-4 Conductor Flat Cable* $333.90QC-8 Conductor Flat Cable* $456.33QC-12 Conductor Flat Cable* $701.19Custom Cut to Length* $10.00Fire Pin Kit $24.54HT (Hospital Tip) $65.03Painted Colors:Gear Cap Only - P.O.AComplete Hinge - P.O.A.C1 Replacement Cover for MCK-54HD Clear $30.40 Net NetD1 Replacement Cover for MCK-54HD Bronze $30.40 Net NetGold or other custom finishes may have 6-8 week lead time.* Requires HandingHinges are rated up to 90 minute opening, for 3 hour rating fire pinsare required. Shop modification or door/framereinforcements are not required for fire pin installation.Fire pins also add extra security to the opening.Price Code 80CG-81 Each QC pigtail is packed with QC4 & QC8.2 Each QC pigtails are packed with QC12.For an additional 6" pigtail order:MCKHC-6/4 (4 wire) @ $21.48 eachMCKHC-6/8 (8 wire) @ $33.03 eachFor QC12 order 1 each of the above @$54.50Fastener Kits (one kit required for up to 95" and2 for 120"FSHSK-CL 77350 ......$27.30FSHSK-BZ 77351 ......$27.30

CG-9CONTINUOUS HINGESFULL SURFACEJune 15, 2011PRODUCT SIZE PART # FINISHPRICE CARTON CARTONEACH QUANTITY WEIGHTMCK-58HD 79" 76811 CLEAR 127.51 1 11Heavy Duty 79" 76812 BRONZE 152.33 1 1183" 76813 CLEAR 129.23 1 1183" 76814 BRONZE 153.85 1 1185" 76815 CLEAR 132.53 1 1185" 76816 BRONZE 157.02 1 1195" 76817 CLEAR 138.31 1 11 1 ⁄295" 76818 BRONZE 181.78 1 11 1 ⁄2120" 76819 CLEAR 242.30 1 14120" 76820 BRONZE 273.04 1 14Complete installation hardware kit which includes self-tapping, 410 SS, screws for frame leaf, and 5 ⁄8 x 1 ⁄4-20 thru boltsand 3 ⁄4 x 12 self drilling screws with special washer for snap cover portion. Door leaf fasteners are 1/4-20 x 1 5/8"thru bolts.Available Options:OptionEach Net AddG Gold Anodized Finish Price Same as BronzeBL Black Anodized Finish Price 20% over BronzeQC-4 Conductor Flat Cable* $333.90QC-8 Conductor Flat Cable* $456.33QC-12 Conductor Flat Cable* $701.19KCCP- Security Fastner Pack* $6.62Custom Cut to Length* $10.00Fire Pin Kit $24.54HT (Hospital Tip) $65.03Painted ColorsGear Cap Only - P.O.A.Complete Hinge - P.O.A.C26 Replacement Cover for MCK-58HD Clear $30.40 Net NetD26 Replacement Cover for MCK-58HD Bronze $30.40 Net NetGold or other custom finishes may have 6-8 week lead time* Requires HandingHinges are rated up to 90 minute opening, for 3 hour rating firepins are required. Shop modification or door/framereinforcements are not required for fire pin installation.Fire pins also add extra security to the opening.Price Code 801 Each QC pigtail is packed with QC4 & QC8.2 Each QC pigtails are packed with QC12.For an additional 6" pigtail order:MCKHC-6/4 (4 wire) @ $21.48 eachMCKHC-6/8 (8 wire) @ $33.03 eachFor QC12 order 1 each of the above @$54.50Fastener Kits (one kit required for up to 95" and2 for 120"58K-CL 77348 ......$27.3058K-BZ 77349 ......$27.30CG-91.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-11CONTINUOUS HINGESStainless & Steel Continuous HingeNumbering System & Standard LengthsJune 15, 2011Hinge PrefixesEG Edge GuardFM Edge MountFS Full SurfaceHG Hinge/GuardHM Half MortiseHS Half SurfaceSC Swing ClearHinge SeriesThis series number indicates the type of hinge and basematerial used:MCK-3700 Carbon steel barrel hinges with stainless pinMCK-300 Stainless steel barrel hinges with stainless pinMCK-3500 12 Gauge stainless steel pin and barrelsecurity hingesHinge Models00 Edge mount (formerly full mortise)01 Full surface, 1/8" offset02 Full surface, flush03 Half surface, 1/8" offset04 Half mortise, 1/8" offset05 Edge mount hinge/guard06 Half mortise hinge/guard08 Edge guard09 Full surface, swing clear10 Swing clear hinge/guard11 Edge mount, self aligningOther numbers are used for specific applicationsOption SuffixesAMS Adjustable Monitoring SwitchCC Concealed Current TransferCT Current Transfer SwitchCTP Current Transfer PreparationDD Dutch DoorEMAP Electrical Modification Access PrepEPT Electric Power TransferES Exposed Monitoring SwitchHT Hospital TipLL Lead LinedMB Medical BearingsPC Powder CoatedRB Raised BarrelWT Wide ThrowStandard Hinge Length Conversion ChartA 6'8" door opening = an actual length of 78.75" (handed)A 7'0" door opening = an actual length of 83.125"A 7'2" door opening = an actual length of 85.00" (handed)A 8'0" door opening = an actual length of 95.00"A 10'0" door opening = an actual length of 118.75"Custom hinge length will be evaluated at the time of request toensure proper pin to knuckle alignment. Some custom lengthrequests may be adjusted to ensure a proper hinge assembly.Specify handing on all custom hinge lengthsCustom DesignMcKINNY’s engineering department will be willing to assistyou in developing custom applications to solve any of yourunique door hinging problems. Together with the customer, wewill go through an official sign-off process to assure customhinges fit your exact needs.There will be a custom drawing approval fee of $100.00 peropening.Standard Powder Coat Finishes$97.65 add to hinge, for hinges over 8' add $151.20BHMA # Nearest McKINNEY DescriptionEquivalent690 MP-PC-1 Dark Bronze714 MP-PC-2 Eggshell White693 MP-PC-3 Semi Gloss Black689 MP-PC-4 Aluminum706 MP-PC-5 Sun Gold691 MP-PC-6 Light BronzeFor FM300 Series Only$97.65 add to hinge, for hinges over 8' add $151.20605 MP-PC-7 Polished BrassKynar Paint with Color Approval - POACG-111.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-12CONTINUOUS HINGESStainless & Steel Continuous HingeContinuous Hinge ModificationsJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11Special LengthADDITIONAL PRICEPlease specify handing on all custom hinge lengths.For hinges 40" to 83-1/8" in length +21.15 to 7'0" priceFor hinges 83-3/16" to 95" in length +21.15 to 8'0" priceFor hinges 95-1/16" to 118-3/4" in length +21.15 to 10'0" priceFor hinges 118-13/16" to 192" in length +42.84 to doubleHanding Requiredthe 8'0"PRODUCT SUFFIX ADDITIONAL PRICEHospital Tip -HT +25.60/hingeCG-12Available on all models except spring-loadedtoilet partition hinges.Helps provide a safe, clean environment.Handing RequiredPRODUCT SUFFIX ADDITIONAL PRICEDutch Door Prep -DD +25.60/hingeContinuous frame leaf with two-piecedoor leaf.Indicate handing, clearances, door and frameheights, and materials when ordering.PRODUCT SUFFIX ADDITIONAL PRICEWide Throw -WT +50.09/hingeOnly available on 300 series hinges.Specify distance from pin centerline to heeledge of hinge when ordering.Reinforcement may be required on extremewide throw applications.These conditions will be determinedthrough a drawing approval process.Cost will be determined at time of approval.Custom Angle: 97.39 per angleAutomatic Door Bottom Cut +21.71Weld End Pins +21.71Plug Weld +21.71Blank Hinges+36.17/hingeHoles omitted for special applicationssuch as welded installations.Cut to size Charge+10.50 per hingePRODUCT SUFFIX ADDITIONAL PRICERaised Barrel (Swaged) -RB +21.71/hingeAvailable on all edge mount and half surfacemodels except on Aluminum hinges.Required on models MCK-FS-201, MCK-FS-202,MCK-FS-301 & MCK-FS-302 in order to open180°. For cased open or center pivot doors.PRODUCT SUFFIX ADDITIONAL PRICEMedical Bearing -MB +13.92/hingeSpecially designed for hospitals and other high frequencyopenings.PRODUCT SUFFIX ADDITIONAL PRICELead Lined Cover -LL +30.61/coverLead lined astragal for EGT +75.69/astragalOnly available on surface mounted Hinges.Used for x-ray room doors and other locations where radiationleakage could be a problem.PRODUCT SUFFIX ADDITIONAL PRICESheared Leaf+28.94/hingeUsed for narrow door thickness’, unevenlyrabbeted frames or other special applications.Specify distance from pin centerline to heeledge of hinge when ordering.For Steel & Stainless Steel hinges only.PRODUCT SUFFIX ADDITIONAL PRICECustom Hole Pattern+42.85/hingeAny hole shape or pattern other thanMcKINNEY’s standard templated hole pattern.Indicate desired pattern and includedimensioned diagrams when ordering.PRODUCT SUFFIX ADDITIONAL PRICESecurity Studs+45.08/hingeStainless steel security studs mounted to theframe leafDoor leaf is drilled to accommodate studsThree studs installed on hinges up to 7'2"Four studs installed on hinges over 7'2"Door and frame must be specially preparedto accommodate security studs.

CG-13CONTINUOUS HINGESStainless & Steel Continuous HingeContinuous Hinge & Edge GuardModificationsPRODUCTCC & EL Concealed CircuitADDITIONAL PRICEPRODUCTPT or EPT Power Transfer PrepJune 15, 2011ADDITIONAL PRICEFor 300, 3500, and 3700 series Edge mountonly. Not available on Raised Barrelapplications.CC-4: Qty (4) 28ga wiresCC-8: Qty (8) 28ga wiresRefer to pages CG32 thru CG34 for CC LocationsCC-4+150.15/hingeCC-8+150.15/hingeElectroLynxEL-4 +174.83EL-8 +233.89EL-12 +280.67PRODUCTCT Current Transfer Contact SwitchADDITIONAL PRICERated for 16 amp. surge current.No wire furnished: 1/4-20 screw posts willaccommodate any gauge wire.Recommended only for low-traffic doors; requiresCTP Current Transfer Prep. Specify location.CT-4 four contactsCT-8 eight contactsPRODUCTElectrical Modification Access PrepPRODUCTSecurity FastenerPRODUCTSS Bearings+157.50/hinge+ 300.30/hingeADDITIONAL PRICECutout prep for the CE, AMS, CT, & ES.Modifications that allows easy one personaccess to wiring between the hinge anddoor/frame.MP-EMAP +71.93/perADDITIONAL PRICE+19.48/hingeTorx Head security fasteners are available inlieu of standard fasteners.ADDITIONAL PRICE+16.70/hingeTo replace all nylon bearings throughout the entire length of hinge.PRODUCTES Exposed Monitoring SwitchCenterline of hinge is standard location bysubmitting the Power Transfer Templatelocated on pages CG29 or CG30.Please provide location and handing forall locations.For swing clear models +42.27/hingeFor all other models +28.88/hingeADDITIONAL PRICEAvailable in 100, 200, 300, and 3500 serieshinges with the prefixes of HG, FM, HS,& HM.Comes with 3 x 28ga wires +79.00/hingePRODUCTAMS Adjustable Monitoring SwitchPRODUCTStandard Edge Guard Cut-OutsPRODUCTMTSP100ADDITIONAL PRICERigid welded assembly gives you the abilityto adjust your monitoring switch to workwith all applications.Not available on aluminum hinges orpowder coat finishes. +150.15/hinge+71.93 prep charge(see MP-EMAP)ADDITIONAL PRICE+13.39/eachUse attached order form on page.For custom cutouts consult factoryfor pricing.Templates may be required for customcutouts.• 4 7/8 ASA strike • Manual flush bolt• 161 strike • Automatic flush bolt• 86 mortise • 161 boltADDITIONAL PRICE+57.75 eachRight Angle Skew Driver forHG310 and HG311CG-131.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-14Fastener / Screw PackInformationJune 15, 2011PRODUCT PART NUMBER PRICE#10 x 7/8" Phillips FlatHead Undercut Self-Drilling Screw MP-10 410 SS $16.70/100MP-12 Zinc plated $15.02/100For edge mounting to metalPRODUCT PART NUMBER PRICE#8 x 3/4" Flat Head Self-Drilling Tek Screw MP-8 Zinc Phillips $20.01/100MP-61 Zinc Torx $26.15/100For attaching 300 series coversCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11PRODUCT PART NUMBER PRICE#12 x 1/2" Phillips FlatHead Undercut Self-Drilling Screw MP-50 Zinc $15.54/100PRODUCT PART NUMBER PRICE#10 x 1-1/4" Flat HeadUndercut Sheet MetalScrew MP-28 Zinc Phillips $14.86/100MP-32 SS Phillips $16.70/100MP-54 SS Torx $30.61/100For edge mounting to woodPRODUCT PART NUMBER PRICE10-32 x 3/4" Flat HeadMachine Screw MP-7 SS Phillips $16.07/100MP-55 SS Torx $28.35/100Used with MP-25 AdjustaScrewPRODUCT PART NUMBER PRICEMR-RSP Screw Pack Specify hinge modelwhen ordering $14.86May require 2 – 3 packsdepending on model & lengthCG-14PRODUCT PART NUMBER PRICE1/4-20 x 3/4" Flat HeadMachine Screw MP-63 Zinc Torx $16.70/100For 3700 SeriesFor edge mounting to metalPRODUCT PART NUMBER PRICE12-24 x 3/4" Flat HeadUndercut MachineScrew MP-66 SS Phillips $20.01/100MP-67 SS Torx $22.79/100Used with MCK-3500 seriesFor edge mounting to metalPRODUCT PART NUMBER PRICE10-24 x 1/2" Flat HeadUndercut MachineScrew MP-52 SS Torx $26.67/100For edge mounting to metalPRODUCT PART NUMBER PRICE12-24 x 1/2" Flat HeadMachine Screw MP-35 SS Phillips $41.22/100MP-39 SS Torx $58.99/100For MCK-FM3500 Security hinge

CG-15Fastener / Screw PackInformationJune 15, 2011PRODUCT PART NUMBER PRICE1/4-20 x 1-3/4"Sleeve Bolt MP-23 Steel $105.16/100For surface mounting to woodPRODUCT PART NUMBER PRICE5/16" pilot hole required for 3/8"- 16 tap1-3/8" Adjusta-Screw with 10-32Internal Thread & Hex HeadAdjustment MP-25 Right Hand $57.23/100MP-57 Left Hand $77.34/100Used with MP-7 screwPRODUCT PART NUMBER PRICE1/4-20 x 1-3/8"Sleeve Bolt MP-24 Aluminum $168.06/100For surface mounting to woodPRODUCT PART NUMBER PRICE10-24 x 1-3/4"Sleeve Bolt MP-34 Steel $209.22/100For surface mounting to woodMCKCHS-1 MCKCHS-2PRODUCT PART NUMBER PRICE1-3/8" Adjusta-Screw with 12-24Internal Thread & HexHead Adjustment MP-58 Right Hand $57.23/100Used with MP-66PRODUCT PART NUMBER PRICE#10 x 3/4" Phillips FlatHead Undercut Self-Drilling Screw MP-53 Zinc $15.02/100For edge mounting to woodPRODUCT PART # DESCRIPTION PROPERTIES SIZE PRICEMCK-CHS-1 73963 Continuous Hinge Shim 16 gauge (1/16" thickness) 6"8" (78.57") $21.6173964 Slip-In Installation 16 gauge (1/16" thickness) $22.4273965 16 gauge (1/16" thickness) $24.84MCK-CHS-2 73966 Continuous Hinge Shim 16 gauge (1/16" thickness) 6"8" (78.57") $27.2073967 Hinge must be removed 16 gauge (1/16" thickness) $29.6173968 16 gauge (1/16" thickness) $31.23• Not available in 10'0" length• Cut down charge for special lengths $16.02CG-151.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited. 6/15/11

CG-16CONTINUOUS HINGESJune 15, 2011PRICE CARTON CARTONPRODUCT DOOR SIZE LENGTH PART # HANDING FINISH EACH QUANTITY WEIGHTContinuous Hinges Stainless Steel Edge MountCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11MCK-FM300 6'8" 78.75" 76850 32D 227.72 1 106'8" 78.75" 76851 32 274.24 1 107'0" 83.125" 76852 32D 227.72 1 107'0" 83.125" 76853 32 274.24 1 107'2" 85".00 76854 32D 304.85 1 107'2" 85".00 76855 32 351.37 1 108'0" 95".00 76856 32D 310.97 1 118'0" 95".00 76857 32 310.97 1 1110'0" 118.75" 76858 32D 357.49 1 1310'0" 118.75" 76859 32 357.49 1 13Refer to Pages CG11, CG12, CG13 For Available OptionsStainless Steel Edge Mount Full-Wrap - Edge GuardMCK-HG305 6'8" 78.75" 76860 RH 32D 297.51 16'8" 78.75" 77104 LH 32D 297.51 16'8" 78.75" 76861 RH 32 344.03 16'8" 78.75" 77105 LH 32 344.03 17'0" 83.125" 76862 32D 297.51 17'0" 83.125" 76863 32 344.03 17'2" 85".00 76864 RH 32D 336.68 17'2" 85".00 77106 LH 32D 336.68 17'2" 85".00 76865 RH 32 383.21 17'2" 85".00 77107 LH 32 383.21 18'0" 95".00 76866 32D 341.58 18'0" 95".00 76867 32 388.10 110'0" 118.75" 76868 32D 408.91 110'0" 118.75" 76869 32 455.44 1Refer to Pages CG11, CG12, CG13 For Available OptionsPrice Code 83CG-16

CG-17CONTINUOUS HINGESJune 15, 2011PRICE CARTON CARTONPRODUCT DOOR SIZE LENGTH PART # HANDING FINISH EACH QUANTITY WEIGHTStainless Steel Edge Mount Half-Wrap - Edge GuardMCK-HG315 6'8" 78.75" 76870 RH 32D 277.31 1 126'8" 78.75" 77108 LH 32D 277.31 1 126'8" 78.75" 76871 RH 32 323.83 1 126'8" 78.75" 77109 LH 32 323.83 1 127'0" 83.125" 76872 32D 277.31 1 127'0" 83.125" 76873 32 323.83 1 127'2" 85".00 76874 RH 32D 314.03 1 127'2" 85".00 77110 LH 32D 314.03 1 127'2" 85".00 76875 RH 32 360.56 1 127'2" 85".00 77111 LH 32 360.56 1 128'0" 95".00 76876 32D 320.16 1 138'0" 95".00 76877 32 366.68 1 1310'0" 118.75" 76878 32D 388.10 1 1510'0" 118.75" 76879 32 434.63 1 15Refer to Pages CG11, CG12, CG13 For Available OptionsStainless Steel Edge Mount Full-Wrap Edge GuardMCK-HG322 6'8" 78.75" 77112 RH 32D 364.84 1 126'8" 78.75" 77113 LH 32D 364.84 1 126'8" 78.75" 77114 RH 32 411.37 1 126'8" 78.75" 77115 LH 32 411.37 1 127'0" 83.125" 77116 32D 364.84 1 137'0" 83.125" 77117 32 411.37 1 137'2" 85".00 77118 RH 32D 421.16 1 137'2" 85".00 77119 LH 32D 421.16 1 137'2" 85".00 77120 RH 32 467.68 1 137'2" 85".00 77121 LH 32 467.68 1 138'0" 95".00 77122 32D 421.16 1 148'0" 95".00 77123 32 467.68 1 1410'0" 118.75" 77124 32D 532.57 1 1610'0" 118.75" 77125 32 579.10 1 16Refer to Pages CG11, CG12, CG13 For Available OptionsPrice Code 83CG-171.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-18CONTINUOUS HINGESJune 15, 2011PRICE CARTON CARTONPRODUCT DOOR SIZE LENGTH PART # HANDING FINISH EACH QUANTITY WEIGHTStainless Steel Edge Mount Full-Wrap Edge GuardCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11MCK-HG323 6'8" 78.75" 77126 RH 32D 364.84 1 126'8" 78.75" 77127 LH 32D 364.84 1 126'8" 78.75" 77128 RH 32 411.37 1 126'8" 78.75" 77129 LH 32 411.37 1 127'0" 83.125" 77130 32D 364.84 1 137'0" 83.125" 77131 32 411.37 1 137'2" 85".00 77132 RH 32D 421.16 1 137'2" 85".00 77133 LH 32D 421.16 1 137'2" 85".00 77134 RH 32 467.68 1 137'2" 85".00 77135 LH 32 467.68 1 138'0" 95".00 77136 32D 421.16 1 148'0" 95".00 77137 32 467.68 1 1410'0" 118.75" 77138 32D 532.57 1 1610'0" 118.75" 77139 32 579.10 1 16Refer to Pages CG11, CG12, CG13 For Available OptionsStainless Steel Swing Clear Full-Wrap Edge GuardMCK-HG326 6'8" 78.75" 77140 RH 32D 355.05 1 126'8" 78.75" 77141 LH 32D 355.05 1 126'8" 78.75" 77142 RH 32 401.57 1 126'8" 78.75" 77143 LH 32 401.57 1 127'0" 83.125" 77144 32D 355.05 1 137'0" 83.125" 77145 32 401.57 1 137'2" 85".00 77146 RH 32D 408.91 1 137'2" 85".00 77147 LH 32D 408.91 1 137'2" 85".00 77148 RH 32 455.44 1 137'2" 85".00 77149 LH 32 455.44 1 138'0" 95".00 77150 32D 415.03 1 148'0" 95".00 77151 32 461.56 1 1410'0" 118.75" 77152 32D 520.33 1 1610'0" 118.75" 77153 32 566.85 1 16Refer to Pages CG11, CG12, CG13 For Available OptionsPrice Code 83CG-18

CG-19CONTINUOUS HINGESJune 15, 2011PRICE CARTON CARTONPRODUCT DOOR SIZE LENGTH PART # HANDING FINISH EACH QUANTITY WEIGHTStainless Steel Edge Mount Safety HingeMCK-FM327 6'8" 78.75" 77154 RH 32D 306.08 1 126'8" 78.75" 77155 LH 32D 306.08 1 126'8" 78.75" 77156 RH 32 352.60 1 126'8" 78.75" 77157 LH 32 352.60 1 127'0" 83.125" 77158 32D 306.08 1 137'0" 83.125" 77159 32 352.60 1 137'2" 85".00 77160 RH 32D 346.48 1 137'2" 85".00 77161 LH 32D 346.48 1 137'2" 85".00 77162 RH 32 393.00 1 137'2" 85".00 77163 LH 32 393.00 1 138'0" 95".00 77164 32D 352.60 1 148'0" 95".00 77165 32 399.13 1 1410'0" 118.75" 77166 32D 433.40 1 1610'0" 118.75" 77167 32 479.92 1 16Refer to Pages CG11, CG12, CG13 For Available OptionsStainless Steel Half MortiseMCK-HM304 7'0" 83.125" 76882 32D 236.29 1 107'0" 83.125" 76883 32 282.82 1 107'2" 85".00 77168 RH 32D 277.31 1 107'2" 85".00 77169 LH 32D 277.31 1 107'2" 85".00 77170 RH 32 323.83 1 107'2" 85".00 77171 LH 32 323.83 1 108'0" 95".00 76886 32D 282.82 1 118'0" 95".00 76887 32 329.33 1 1110'0" 118.75" 77172 32D 346.48 1 1310'0" 118.75" 77173 32 393.00 1 13Refer to Pages CG11, CG12, CG13 For Available OptionsStainless Steel Half Mortise,Half-Wrap - Edge GuardMCK-HG306 7'0" 83.125" 76892 32D 244.86 1 127'0" 83.125" 76893 32 291.39 1 127'2" 85".00 77174 RH 32D 286.48 1 127'2" 85".00 77175 LH 32D 286.48 1 127'2" 85".00 77176 RH 32 333.01 1 127'2" 85".00 77177 LH 32 333.01 1 128'0" 95".00 76896 32D 292.60 1 138'0" 95".00 76897 32 339.13 1 1310'0" 118.75" 77178 32D 355.05 1 1410'0" 118.75" 77179 32 401.57 1 14Refer to Pages CG11, CG12, CG13 For Available OptionsPrice Code 83CG-191.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-20CONTINUOUS HINGESJune 15, 2011PRICE CARTON CARTONPRODUCT DOOR SIZE LENGTH PART # HANDING FINISH EACH QUANTITY WEIGHTStainless Steel Swing Clear Half-Wrap - Edge GuardCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11MCK-HG311 7'0" 83.125" 76902 32D 255.87 1 137'0" 83.125" 76903 32 302.40 1 137'2" 85".00 77180 RH 32D 293.83 1 137'2" 85".00 77181 LH 32D 293.83 1 137'2" 85".00 77182 RH 32 340.36 1 137'2" 85".00 77183 LH 32 340.36 1 138'0" 95".00 76906 32D 299.95 1 148'0" 95".00 76907 32 346.48 1 1410'0" 118.75" 77184 32D 367.90 1 1610'0" 118.75" 77185 32 414.42 1 16Refer to Pages CG11, CG12, CG13 For Available OptionsStainless Steel Full Surface 1/8" InsetMCK-FS301 6'8" 78.75" 77186 RH 32D 264.45 1 126'8" 78.75" 77187 LH 32D 264.45 1 126'8" 78.75" 77188 RH 32 310.97 1 126'8" 78.75" 77189 LH 32 310.97 1 127'0" 83.125" 77190 32D 264.45 1 137'0" 83.125" 77191 32 310.97 1 137'2" 85".00 77192 RH 32D 305.47 1 137'2" 85".00 77193 LH 32D 305.47 1 137'2" 85".00 77194 RH 32 351.99 1 137'2" 85".00 77195 LH 32 351.99 1 138'0" 95".00 77196 32D 311.59 1 148'0" 95".00 77197 32 358.11 1 1410'0" 118.75" 77198 32D 429.11 1 1610'0" 118.75" 77199 32 475.64 1 16Refer to Pages CG11, CG12, CG13 For Available OptionsMCK-HS303 6'8" 78.75" 77358 32D 236.29 1 137'0" 83.125" 77359 32D 236.29 1 137'2" 85" 77360 32D 277.31 1 138'0" 95" 77361 32D 277.31 1 1410'0" 118.75" 77362 32D 346.48 1 16Price Code 83CG-20

CG-21CONTINUOUS HINGESJune 15, 2011PRICE CARTON CARTONPRODUCT DOOR SIZE LENGTH PART # HANDING FINISH EACH QUANTITY WEIGHTStainless Steel Full Surface Flush MountMCK-FS302 6'8" 78.75" 76910 32D 264.45 1 126'8" 78.75" 76911 32 310.97 1 127'0" 83.125" 76912 32D 264.45 1 137'0" 83.125" 76913 32 310.97 1 137'2" 85".00 76914 32D 305.47 1 137'2" 85".00 76915 32 358.11 1 138'0" 95".00 76916 32D 317.09 1 148'0" 95".00 76917 32 358.11 1 1410'0" 118.75" 77204 32D 429.11 1 1610'0" 118.75" 77205 32 475.64 1 16Refer to Pages CG11, CG12, CG13 For Available OptionsStainless Steel Full Surface Swing ClearMCK-FS309 6'8" 78.75" 77206 RH 32D 285.87 1 126'8" 78.75" 77207 LH 32D 285.87 1 126'8" 78.75" 77208 RH 32 332.40 1 126'8" 78.75" 77209 LH 32 332.40 1 127'0" 83.125" 77210 32D 273.63 1 137'0" 83.125" 77211 32 332.40 1 137'2" 85".00 77212 RH 32D 333.01 1 137'2" 85".00 77213 LH 32D 333.01 1 137'2" 85".00 77214 RH 32 379.53 1 137'2" 85".00 77215 LH 32 379.53 1 138'0" 95".00 77216 32D 339.13 1 148'0" 95".00 77217 32 385.65 1 1410'0" 118.75" 77218 32D 404.63 1 1610'0" 118.75" 77219 32 451.15 1 16Refer to Pages CG11, CG12, CG13 For Available OptionsPrice Code 83CG-211.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-22CONTINUOUS HINGESJune 15, 2011PRICE CARTON CARTONPRODUCT DOOR SIZE LENGTH PART # HANDING FINISH EACH QUANTITY WEIGHTStainless Steel Full Surface 3/4" OffsetCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11MCK-FS321 6'8" 78.75" 77220 RH 32D 310.36 1 126'8" 78.75" 77221 LH 32D 310.36 1 126'8" 78.75" 77222 RH 32 356.88 1 126'8" 78.75" 77223 LH 32 356.88 1 127'0" 83.125" 77224 32D 310.36 1 137'0" 83.125" 77225 32 356.88 1 137'2" 85".00 77226 RH 32D 355.05 1 137'2" 85".00 77227 LH 32D 355.05 1 137'2" 85".00 77228 RH 32 401.57 1 137'2" 85".00 77229 LH 32 401.57 1 138'0" 95".00 77230 32D 361.17 1 148'0" 95".00 77231 32 407.69 1 1410'0" 118.75" 77232 32D 470.75 1 1610'0" 118.75" 77233 32 517.27 1 16Refer to Pages CG11, CG12, CG13 For Available OptionsStainless Steel Swing Clear Full-Wrap Edge GuardMCK-HG310 6'8" 78.75" 77234 RH 32D 330.56 1 126'8" 78.75" 77235 LH 32D 330.56 1 126'8" 78.75" 77236 RH 32 377.09 1 126'8" 78.75" 77237 LH 32 377.09 1 127'0" 83.125" 77238 32D 330.56 1 137'0" 83.125" 77239 32 377.09 1 137'2" 85".00 77240 RH 32D 376.48 1 137'2" 85".00 77241 LH 32D 376.48 1 137'2" 85".00 77242 RH 32 422.99 1 137'2" 85".00 77243 LH 32 422.99 1 138'0" 95".00 77244 32D 382.60 1 148'0" 95".00 77245 32 429.11 1 1410'0" 118.75" 77246 32D 475.03 1 1610'0" 118.75" 77247 32 521.56 1 16Refer to Pages CG11, CG12, CG13 For Available OptionsPrice Code 83CG-22

CG-233500 SERIES STAINLESS SECURITY HINGESJune 15, 2011PRICE CARTONPRODUCT DOOR SIZE LENGTH PART # HANDING FINISH EACH QUANTITYStainless Steel Edge MountMCK-FM3500 6'8" 78.75" 77263 RH 32D 306.08 16'8" 78.75" 77264 LH 32D 306.08 16'8" 78.75" 77265 RH 32 352.60 16'8" 78.75" 77266 LH 32 352.60 17'0" 83.125" 77267 32D 306.08 17'0" 83.125" 77268 32 352.60 17'2" 85".00 77269 RH 32D 359.33 17'2" 85".00 77270 LH 32D 359.33 17'2" 85".00 77271 RH 32 405.86 17'2" 85".00 77272 LH 32 405.86 18'0" 95".00 77273 32D 365.45 18'0" 95".00 77274 32 411.98 110'0" 118.75" 77275 32D 429.11 110'0" 118.75" 77276 32 475.64 1Refer to Pages CG11, CG12, CG13 For Available OptionsStainless Steel Full Surface 1/8" InsetMCK-FS3501 6'8" 78.75" 77277 RH 32D 335.45 16'8" 78.75" 77278 LH 32D 335.45 16'8" 78.75" 77279 RH 32 381.98 16'8" 78.75" 77280 LH 32 381.98 17'0" 83.125" 77281 32D 335.45 17'0" 83.125" 77282 32 381.98 17'2" 85".00 77283 RH 32D 383.82 17'2" 85".00 77284 LH 32D 383.82 17'2" 85".00 77285 RH 32 430.34 17'2" 85".00 77286 LH 32 430.34 18'0" 95".00 77287 32D 389.94 18'0" 95".00 77288 32 389.94 110'0" 118.75" 77289 32D 475.03 110'0" 118.75" 77290 32 521.56 1Refer to Pages CG11, CG12, CG13 For Available OptionsPrice Code 83CG-231.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-243500 SERIES STAINLESS SECURITY HINGESJune 15, 2011PRICE CARTONPRODUCT DOOR SIZE LENGTH PART # HANDING FINISH EACH QUANTITYStainless Steel Full SurfaceCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11MCK-FS3502 6'8" 78.75" 77291 RH 32D 335.45 16'8" 78.75" 77292 LH 32D 335.45 16'8" 78.75" 77293 RH 32 381.98 16'8" 78.75" 77294 LH 32 381.98 17'0" 83.125" 77295 32D 335.45 17'0" 83.125" 77296 32 381.98 17'2" 85".00 77297 RH 32D 383.82 17'2" 85".00 77298 LH 32D 383.82 17'2" 85".00 77299 RH 32 430.34 17'2" 85".00 77300 LH 32 430.34 18'0" 95".00 77301 32D 389.94 18'0" 95".00 77302 32 436.46 110'0" 118.75" 77303 32D 475.03 110'0" 118.75" 77304 32 521.56 1Stainless Steel Full WrapMCK-HG3505 6'8" 78.75" 77305 RH 32D 335.45 16'8" 78.75" 77306 LH 32D 335.45 16'8" 78.75" 77307 RH 32 381.98 16'8" 78.75" 77308 LH 32 381.98 17'0" 83.125" 77309 32D 335.45 17'0" 83.125" 77310 32 381.98 17'2" 85".00 77311 RH 32D 383.82 17'2" 85".00 77312 LH 32D 383.82 17'2" 85".00 77313 RH 32 430.34 17'2" 85".00 77314 LH 32 430.34 18'0" 95".00 77315 32D 389.94 18'0" 95".00 77316 32 436.46 110'0" 118.75" 77317 32D 475.03 110'0" 118.75" 77318 32 521.56 1Refer to Pages CG11, CG12, CG13 For Available OptionsPrice Code 83CG-24

CG-25STEEL HINGESJune 15, 2011PRICE CARTON CARTONPRODUCT DOOR SIZE LENGTH PART # HANDING FINISH EACH QUANTITY WEIGHTSteel Full MortiseMCK-FM3700 6'8" 78.75" 76950 RH P 128.55 1 106'8" 78.75" 77248 LH P 128.55 1 107'0" 83.125" 76951 P 128.55 1 107'2" 85".00 76952 RH P 157.32 1 107'2" 85".00 77249 LH P 157.32 1 108'0" 95".00 76953 P 163.44 1 1110'0" 118.75" 76954 P 194.66 1 13Refer to Pages CG11, CG12, CG13 For Available OptionsSteel Full Surface 1/8" InsetMCK-FS3701 6'8" 78.75" 77250 RH P 165.28 1 106'8" 78.75" 77251 LH P 165.28 1 107'0" 83.125" 77252 P 165.28 1 107'2" 85".00 77253 RH P 202.62 1 107'2" 85".00 77254 LH P 202.62 1 108'0" 95".00 77255 P 208.74 1 1110'0" 118.75" 77256 P 252.21 1 13Refer to Pages CG11, CG12, CG13 For Available OptionsSteel Full Surface Flush MountMCK-FS3702 6'8" 78.75" 76980 RH P 157.41 1 106'8" 78.75" 77257 LH P 165.28 1 107'0" 83.125" 76981 P 148.75 1 107'2" 85".00 76982 RH P 182.42 1 107'2" 85".00 77258 LH P 182.42 1 108'0" 95".00 76983 P 188.54 1 1110'0" 118.75" 77259 P 252.21 1 13Refer to Pages CG11, CG12, CG13 For Available OptionsSteel Half SurfaceMCK-HS3703 6'8" 78.75" 77319 RH P 148.75 1 106'8" 78.75" 77260 LH P 148.75 1 107'0" 83.125" 77320 P 148.75 1 107'2" 85".00 77321 RH P 182.42 1 107'2" 85".00 77261 LH P 182.42 1 108'0" 95".00 77322 P 188.54 1 1110'0" 118.75" 77262 P 231.39 1 13Refer to Pages CG11, CG12, CG13 For Available OptionsPrice Code 87CG-251.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-26300 SERIES EDGE GUARDSJune 15, 2011PRICE CARTON CARTONPRODUCT DOOR SIZE LENGTH FINISH EACH QUANTITY WEIGHTMCK-EG-308 6'8" 78.75" 32D $107.73 AS ORDERED AS ORDERED7'0" 83.125" 32D $107.73 AS ORDERED AS ORDERED7'2" 85.00" 32D $120.60 AS ORDERED AS ORDERED8'0" 95.00" 32D $126.69 AS ORDERED AS ORDERED10'0" 118.75" 32D $153.04 AS ORDERED AS ORDEREDCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11MCK-EG-C308 6'8" 78.75" 32D $91.83 AS ORDERED AS ORDERED7'0" 83.125" 32D $91.83 AS ORDERED AS ORDERED7'2" 85.00" 32D $104.06 AS ORDERED AS ORDERED8'0" 95.00" 32D $110.20 AS ORDERED AS ORDERED10'0" 118.75" 32D $132.83 AS ORDERED AS ORDEREDMCK-EG-T308 6'8" 78.75" 32D $124.27 AS ORDERED AS ORDERED7'0" 83.125" 32D $124.27 AS ORDERED AS ORDERED7'2" 85.00" 32D $145.69 AS ORDERED AS ORDERED8'0" 95.00" 32D $151.83 AS ORDERED AS ORDERED10'0" 118.75" 32D $182.44 AS ORDERED AS ORDEREDEdge Guard Order Form Must be provided with order. See page CG -27Standard Edge Guard Cut-outs +13.35/eachUse order form from page CG-27Price Code 84CG-26

CG-27STAINLESS STEELEDGE GUARD ORDER FORMDrawing submittal and factory approval required prior to order entry.June 15, 2011Customer:P.O. No.I, the undersigned, approved the design and dimensions as shown on this print,and authorize the fabrication of these edge guards as indicated.Signed:161LatchBolt86MortiseLockASAStrike161StrikeManualFlush BoltAuto FlushBolt(Hollow Metal Door)AutoFlush Bolt(Wood Door)Custom(Please specifyDimensions)Fire Bolt(Specify Hole Size)1 1 8"1 1 4"1 1 4"1 1 8"1"1"2 1 4"8"4 7 8"2 3 4"6 3 4 "8 1 2"Top of DoorC LCLC LEDGE GUARDASTRAGALEG-CZ ASTRAGALDOOR EDGESQUAREBEVELHANDINGLH/ RHR ACTIVERH/LHR ACTIVELH/RHR INACTIVERH/LHR INACTIVE4 1 2" x 4 1 2"5" x 5"CustomDOOR TAG INFOFor use on 1 3/4" doorFor use on 1 7/8" doorFor use on " doorQUANTITY:BUTT HINGE SIZESPECIAL INSTRUCTIONSTDTP = Top of Door to Top of Butt HingeTDTBTDTBTDTBTDTBCG-271.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-28CONTINUOUSHINGE DUTCH DOOR PREP ORDER FORMFill in appropriate dimensions and check off boxes including handing.June 15, 2011Hinge SideEdge GuardCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.Customer:Model:P.O. No.McKINNEYLEFT HANDRIGHT HANDQty:LEFT HAN D REVERSESigned:RIGHT HAND REVE RSEDate:6/15/11CG-28

CG-29McKINNEY HINGESJune 15, 2011CG-291.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-30McKINNEY HINGESJune 10, 2010Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/10/10CG-30

CG-31CUSTOM STAINLESS CONTINUOUS HINGEINFORMATION FORMJune 15, 2011Company name: ______________________________________ Phone: ____________________________________Contact name: ________________________________________ Fax: ___________________________________Job name: _________________________________________PO # : _________________________________________________Quote# : _______________________________________________Email: ____________________________________Order date: ________________________________Required date: ____________________________It is our goal to produce a custom hinge in a timely manner, done right the first time for your customer. Please fill in asmuch of the in formation listed below as possible to assist us in achieving our goal. Thank you!Door Qty.______ Multiple sizes: Yes NoDoor height: ____ Width: ____ Thickness: ____Single Pair (Ev en Un-even ) ActiveNew door Existing doorWood door Hollow metal door Gauge: ___Reinforced: Yes NoApprox. door weight: _____FrameDoor opening width: _____ Frame size: ___________New frame Existing frameHM frame AL frame GaugeHingeLocation: Interior ExteriorDegree of required swing: 90º 180ºHinge material: SS AL Carbon steelCustom finish required? Yes NoFire label required: Yes NoElectrification required: Yes NoWide throw required: Yes NoNote: If there is any hardware that will affect themanufacturing of our product, all detailed templates mustbe attached. (ie: Adjustable door bottom; ETP prep)Hardware Mfg: ________________________________Template number: _____________________________For internal use onlyDrawing request tracking # _______________________ETO request tracking # ___________________________Process alertS:/customer service/custom hinge information form.doc CSF-007Include all applicable dimensions whenmaking drawing .CG-311.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-32CC HINGE LOCATIONFOR STAINLESS OR STEELCONTINUOUS HINGES UP TO 83-1/8"June 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11CG-32

CG-33CC HINGE LOCATIONFOR STAINLESS OR STEELCONTINUOUS HINGES FOR83-3/16" THRU 95"June 15, 2011CG-331.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-34CC HINGE LOCATIONFOR STAINLESS OR STEELCONTINUOUS HINGES95-1/16" THRU 118.75"June 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11CG-34

CG-35CUSTOMER APPROVAL SHEET83HD-CC4 & CC8 ACCESSIBLEALUMINUM CONTINUOUS HINGEPREP TEMPLATEJune 15, 2011CG-351.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-36CUSTOMER APPROVAL SHEET85HD-CC4 & CC8 ACCESSIBLEALUMINUM CONTINUOUS HINGEPREP TEMPLATEJune 15, 2011Concealed Circuit (CC) ApplicationCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11CG-36

CG-37CUSTOMER APPROVAL SHEET95HD-CC4 & CC8 ACCESSIBLEALUMINUM CONTINUOUS HINGEPREP TEMPLATEJune 15, 2011CAPCONCEALED CIRCUIT (CC) APPLICATIONDOOR EDGE & FRAME RABBIT PREP.JambDoorWiresACCESSIBLE PREPSECTION SEE DETAIL41 1/2[1054]NOTE:1-1/4” x 4” CUT OUTREQUIRED ON DOOREDGE & FRAMERABBIT37 1/2[953]37 1/2[953]83[2108]83[2108]1 1/4 [32]CUTOUTRECOMMENDEDCC4 ORCC8 PREP.1/16[2]1 1/2 [38]DEEPTOP1 1/2 [38]DEEPACCESSIBLE 8" SECTION FORACC-4 or ACC-8 PREP. NO CAPCheck OneACC-4 PREPACC-8 PREPDO NOT SCALEFOR ILLUSTRATION PRUPOSE ONLY4[102]1 3/4[44]C/L Door Edge8[203]COMPANY ________________________________APPROVED BY ______________ DATE ________1.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.CG-376/15/11

CG-38CUSTOMER APPROVAL SHEET83HD-CC4 & CC8 SERVICEABLEALUMINUM CONTINUOUS HINGEPREP TEMPLATEJune 15, 2011Concealed Circuit (CC) ApplicationCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11CG-38

CG-39CUSTOMER APPROVAL SHEET85HD-CC4 & CC8 SERVICEABLEALUMINUM CONTINUOUS HINGEPREP TEMPLATEJune 15, 2011Concealed Circuit (CC) ApplicationCG-391.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-40CUSTOMER APPROVAL SHEET95HD-CC4 & CC8 SERVICEABLEALUMINUM CONTINUOUS HINGEPREP TEMPLATEJune 15, 2011Concealed Circuit (CC) ApplicationCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11CG-40

CG-4179HD & 83HD-CC4 & MMALUMINUM CONTINUOUS HINGESTANDARD LOCATION TEMPLATEJune 15, 2011CG-411.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-4279HD & 83HD-CC8 & MMALUMINUM CONTINUOUS HINGESTANDARD LOCATION TEMPLATEJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11CG-42

CG-4379HD & 83HD-CC12 & MMALUMINUM CONTINUOUS HINGESTANDARD LOCATION TEMPLATEJune 15, 2011CG-431.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-4485HD-CC4 & MMALUMINUM CONTINUOUS HINGESTANDARD LOCATION TEMPLATEJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11CG-44

CG-4585HD-CC8 & MMALUMINUM CONTINUOUS HINGESTANDARD LOCATION TEMPLATEJune 15, 2011CG-451.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-4685HD-CC12 & MMALUMINUM CONTINUOUS HINGESTANDARD LOCATION TEMPLATEJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11CG-46

CG-4795HD-CC4 & MMALUMINUM CONTINUOUS HINGESTANDARD LOCATION TEMPLATEJune 15, 2011CG-471.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-4895HD-CC8 & MMALUMINUM CONTINUOUS HINGESTANDARD LOCATION TEMPLATEJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11CG-48

CG-4995HD-CC12 & MMALUMINUM CONTINUOUS HINGESTANDARD LOCATION TEMPLATEJune 15, 2011CG-491.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-50120HD-CC4 & MMALUMINUM CONTINUOUS HINGESTANDARD LOCATION TEMPLATEJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11CG-50

CG-51C120HD-CC8 & MMALUMINUM CONTINUOUS HINGESTANDARD LOCATION TEMPLATEJune 15, 2011CG-511.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-52120HD-CC12 & MMALUMINUM CONTINUOUS HINGESTANDARD LOCATION TEMPLATEJune 15, 2011Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11CG-52

CG-53STAINLESS AND STEEL CONTINUOUSHinge Door Frame ClearancesFastener InformationJune 15, 2011Under-sizing Required For All Door Applications:• Hinge Side Clearance.......................Dimension Specific Per Model• Lock side clearance..........................1/8" Per N.F.P.A. (For single as well as between a pair of doors)• Allowance for frame irregularities...1/16"Standard Non-Adjustable Application FormulasExample for Standard Single Door:MODEL: (MCK-HG305) . . . . . . . . .3/8" Hinge Side Clearance1/8" Lock-side Clearance+1/16" Frame Irregularity9/16" (As shown in 300 Series Standard Non-Adjustable Chart Page CG54)Example for Standard Pair of Doors:MODEL: (MCK-HG305) . . . . . . . . .3/8" Hinge Side Clearance (Door 1)3/8" Lock-side Clearance (Door 2)1/8" Lock-side Clearance (Between Pair of Doors)+1/16" Frame Irregularity15/16" (As shown in 300 Series Standard Non-Adjustable Chart Page CG54)For adjustable models used in an Adjustable Application, an additional 1/8" of clearance isrequired as shown belowExample for Standard Single Door:MODEL: (MCK-HG305) . . . . . . . . .3/8" Hinge Side Clearance1/8" Lock-side Clearance1/16" Frame Irregularity+1/8" Additional Adjustment Clearance11/16” (As shown in 300 Series Adjustable Chart Page CG55)Example for Standard Pair of Doors:MODEL: (MCK-HG305) . . . . . . . . .3/8" Hinge Side Clearance (Door 1)3/8" Hinge Side Clearance (Door 2)1/8" Lock-side Clearance (Between Pair of Doors)1/16" Frame Irregularity1/8" Additional Adjustment Clearance (Door 1)+1/8" Additional Adjustment Clearance (Door 2)1-3/16" (As shown in 300 Series Adjustable Chart Page CG55)CG-531.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-54300 Series Pin & BarrelStainless Steel Continuous HingesClearance DimensionsJune 15, 2011Standard “Non-Adjustable” ApplicationCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11MODEL Clearance (A) Single Door Pair of DoorsMCK-FM300 1/4 7/16 11/16MCK-FS301 1/8 5/16 7/16MCK-FS302 1/8 5/16 7/16MCK-FS303 1/8 5/16 7/16*MCK-HM304 1/8 5/16 7/16MCK-HG305 3/8 9/16 15/16*MCK-HG306 1/8 5/16 7/16*MCK-FS309 1/8 5/16 7/16MCK*HG310 1/4 7/16 11/16*MCK-HG311 1/8 5/16 7/16MCK-HG315 1/4 7/16 11/16*MCK-FS21 1/8 5/16 7/16MCK-HG322 5/16 1/2 13/16MCK-HG323 5/16 1/2 13/16MCK-HG326 3/8 9/16 15/16MCK-FM327 11/16 7/8 1-9/16*Will work with Industry Standard Clearances.“Adjustable” ApplicationTotal TotalUnder-sizing Under-sizingHinge Side For ForMODEL Clearance (A) Single Door Pair of DoorsMCK-HG-305 3/8 11/16 1-3/16MCK-HG-310 1/4 9/16 15/16MCK-HG-322 5/16 5/8 1-1/16MCK-HG-323 5/16 5/8 1-1/16MCK-HG-326 3/8 11/16 - 3/16Proper door reinforcement is required for adjustable feature.CG-54

CG-55300 Series Pin & BarrelStainless Steel Continuous HingesClearance DimensionsJune 15, 2011Standard “Non-Adjustable” ApplicationTotal TotalUnder-sizing Under-sizingHinge Side For ForMODEL Clearance (A) Single Door Pair of DoorsMCK-EG308 1/16 3/16 1/4MCK-EG-C308 1/16 3/16 1/4MCK-EG-T308 1/16 1/4In a stand-alone application, where the MCK-EG-T308 is used ona pair of doors while the opposite door contains no edge guard, theTotal Under-sizing for the pair of doors would be 3/16".“Adjustable” ApplicationTotal TotalUnder-sizing Under-sizingHinge Side For ForMODEL Clearance (A) Single Door Pair of DoorsMCK-EG308 1/16 5/16 1/2MCK-EG-T308 1/16 1/2In a stand-alone application, where the MCK-EG-T308 is used ona pair of doors while the opposite door contains no edge guard, theTotal Under-sizing for the pair of doors would be 5/16".Proper door reinforcement is required for adjustable feature.CG-551.800.346.7707 • PRICE BOOK Copyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11

CG-56300 Series Pin & BarrelStainless Steel Continuous HingesClearance DimensionsJune 15, 2011Standard “Non-Adjustable” ApplicationCopyright © 1988-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. 1.800.346.7707 • PRICE BOOKReproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.6/15/11Total TotalUnder-sizing Under-sizingHinge Side For ForMODEL Clearance (A) Single Door Pair of DoorsMCK-FM3700 1/4 7/16 11/16*MCK-FS3701 1/8 5/16 7/16*MCK-FS3702 1/8 5/16 7/16*MCK-HS3703 1/8 5/16 7/16* Will work with Industry Standard Clearances.CG-56