Lecture Notes of Dose distribution calculation inside phantom with ...

&INP AE=0.521,AP=0.0100,UE=2.011,UP=1.5 /ENDto&INP AE=0.521,AP=0.0100,UE=0.711,UP=0.2 /END6. Run ucxyz phantom2.f by egs5run. In the case of Linux or CygwinEnter ucxyz phantom2 as the user code.Simply enter "return" as the file name for unit 4 and 25.Enter 1 for "Does this user code read from the terminal?". In the case of DOSegs5run ucxyz phantom27. Check egs5job.out to confirm average source energy is nearly equal to 40keV.Compare the sampled spectrum with pdf. Compare the absorbed dose distributionwith xyz phantom.out.8. Check the trajectories using CGview.4.3 Problem 31. cp ucxyz phantom2.data ucxyz phantom3.data2. cp ucxyz phantom2.inp ucxyz phantom3.inp3. Modify ucxyz phantom3.data as follows:(a) Modify the number of voxel at Z-direction.Change1.0, 20 voxel width, number of voxelsto1.0, 16 voxel width, number of voxels(b) Modify the material assignment etc.Change1,3,1,3, 2,21, 1, 0.000, 0.00, 0.00 tissue1 1 0 0 0 0 0 0 peang,edgefl,auger,ray,pola,incoh,prof,impac1,3,1,3,22,22, 2, 0.00, 0.00, 0.00 air1 1 0 0 0 0 0 0 peang,edgefl,auger,ray,pola,incoh,prof,impacto1,3,1,3, 2, 4, 1, 0.000, 0.00, 0.00 tissue1 1 0 0 0 0 0 0 peang,edgefl,auger,ray,pola,incoh,prof,impac1,3,1,3, 5,14, 1, 0.300, 0.00, 0.00 lung1 1 0 0 0 0 0 0 peang,edgefl,auger,ray,pola,incoh,prof,impac1,3,1,3,15,17, 1, 0.000, 0.00, 0.00 tissue1 1 0 0 0 0 0 0 peang,edgefl,auger,ray,pola,incoh,prof,impac1,3,1,3,18,18, 2, 0.00, 0.00, 0.00 air1 1 0 0 0 0 0 0 peang,edgefl,auger,ray,pola,incoh,prof,impac4. Execute run5again. In the case of Linux or CygwinEnter ucxyz phantom3 as the file name for unit 4 and simply enter "return"as the file name for unit 25.Enter simply return for "Enter name of the executable".45