13.07.2015 Views

Katadyn Vario Maintenance Guide

Katadyn Vario Maintenance Guide

Katadyn Vario Maintenance Guide

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Maintenance</strong> <strong>Guide</strong> <strong>Katadyn</strong><strong>Vario</strong>5. Clogged glass fiber cartridge. A clogged cartridgemay require replacement. However as atemporary solution in the field, remove the cartridge and swish it around a in water. Makesureuntreated water does not contact the cartridge output barb. If flow is not restored, replace cartridge.7. Reinstalling the glass-fiber cartridge: cWhen reinstalling this cartridge turnn it until the cartridgedrops into the correct position, when the five notches inits top are filled by thee five black flanges finside the lower part of the <strong>Vario</strong> housing. The photo above that shows s the ceramic disk also showsproper positioning of the glass-fibereplaced thecartridge correctly.cartridge. If you can not get the t <strong>Vario</strong> to re-assemble, mostlikely you have not Refill of Carbon CartridgeRemove red cover on glass-fiber filter cartridge and green foam underneath too reveal activatedcarbon.2) Rinseinside of cartridge withfiltered water. Do not remove white filter disc from the bottom of thecylinder.3) Openpackage of activated carbon and pour into the cartridge. Cover with new green foam andred lid. Note: Applya small amount of silicone lubricant to o-ring4). The top of the red cover must be flush with the upper edge of the filter cartridge.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!