QinetiQ - Sperry Marine

QinetiQ* ** ** ** * *NUT IFILD BODYNo 0191CERTIFICATE OF TYPE APPROVAL(EC Certificate of Type Examination - Module B)(Marine Equipment Directive - 96/98/EC, as amended* 1)Applicant:-Manufacturer:-Northrop Grumman Sperry Marine B.V.Northrop Grumman Sperry Marine B.V.118 Burlington Road, New Malden 118 Burlington Road, New MaldenSurrey, KT3 4NRSurrey, KT3 4NRUnited KingdomUnited KingdomThis is to certify that the applicant has submitted details of a:-Shipborne Radar Equipment (IE( 62388 Category 1 & 1C)(COMMISSION DIRECTIVE 2009/26/EC - ITEM A.1/4.34, CAT 1 RADAR)(ALSO COMMISSION DIRECTIVE 2009/26/EC - ITEM A.1/4.38, TO ADD SUFFIX "C" FOR CHART OPTION)Of system types known and designated as:-a) VisionMaster FT Dual Channel, CAT1 34, - Radar Systemsb) VisionMaster FT Dual Channel, CAT1C 34, - Chart Radar Systems(Comprising component parts and having technical characteristics shown in schedule 2a, 2b, 3 & 4)and that these have been assessed, tested and when used in a combination of component parts asdescribed in the attached schedules, is CERTIFIED as complying with the relevant parts of:IEC 62388 : 2007, "Marine Shipborne Radar Equipment"IEC 60945 : 2002, "General Requirements for Marine Navigation Equipment" (Inc. Corrig'm1:2008)IEC 62288 : 2008 "Presentation of navigation-related information on shipborne navigational displays"(being testing standards listed in column 5 of Annex A.1 of Directive 2009/26/EC for Items 4.34 & 4.38)Note: The presentation standard of this equipment has been assessed against clauses in IEC 62388:2007 derivedfrom IMO Resolution MSC.191(79) and which equate those published in IEC 62288:2008.It is also RECOGNISED that the equipment conforms to performance standards not inferior to thoseadopted by the International Maritime Organisation, and which are contained in the relevant parts ofResolution MSC.191(79), Resolution MSC.192(79) and Resolution A694(17).SIGNED:C^ DATE of ISSUE: 19 th November 2010R A Sharp Authorised Signatory DATE of EXPIRY: 11 th February 2015Certificate Number:QQ-MED-01/10-O1REU/USCG Mutual Recognition Agreement USCG Approval Number: 165.120/EC0191/0110-01Council Decision 2004/425/EC(Item A.1/4.34 ARPA (Tracking CAT1), display and function only)This Certificate is Valid until expiry date shown, subject to thestandard conditions of issue printed on page 8Northrop Grumman Sperry Marine BV are Module D registered with QinetiQin accord with standard condition 3, ref; Certificate DQAS-16/04-NGS001R4.QinetiQCody Technology ParkIvely Road, FarnboroughHampshire. GU14 OLXmCaMaritime and Coastguard AgencyThe MCA is an Executive Agency ofthe Department for TransportUnder the terms of the United Kingdom Statutory Instrument, No 1957: 1999, QinetiQ Ltd has been Notified to the European Commissionby the Maritime and Coastguard Agency as a Body authorised to conduct Conformity Assessment procedures under the provisions of theEuropean Council Directive 96/98/EC (as amended) on Marine Equipment and issue Certificates of Type Approval.QinetiQ/EES/EMES/MED/002/2.0 '1 Commission Directives 2009/26/EC, 2008/67/EC, 2002/75/EC & 2002/84/ECPage 1 of 8

Schedule 1Statement on New "Radar Systems" Standard IEC 62388The International Maritime Organisation (IMO) adopted RESOLUTION MSC.192(79) on 6 December 2004On the REVISED PERFORMANCE STANDARDS FOR RADAR EQUIPMENT. These standards are mandated to beimplemented on or after 1St July 2008.The Scope recognised that radar should provide the integration and display of radar video, target trackinginformation, positional data derived from own ships position (EPFS) and geo referenced data.The integration and display of AIS information should be provided to complement radar. The capability ofdisplaying selected parts of Electronic Navigation Charts and other vector chart information may be provided to aidnavigation and for position monitoring.Contained within MSC.192(79) were details of the Differences in the performance requirements for varioussizes/categories of ship/craft to which SOLAS applies, these were contained in TABLE 1.Cat 3 Cat 2 Cat 1Size of ship/craft

Schedule 2a -Category 1 & 1C RadarVisionMaster FT Dual Channel, CAT1 34 Radar SystemsVisionMaster FT Dual Channel, CAT1C 34 Chart Radar SystemsThe applicant declared that the following radar processing and display units when operated with twosuitable transceiver units selected from schedule 2b, form the system designations given on Page 1. Theresulting system has been assessed & tested, and satisfactory details of these units were included in thetechnical file.MAIN UNIT Comprising:-Radar Display - LCD Monitor 65923C, 65923E, 4302482-1 or 4302482-2 *1Radar Display - 25.5" Widescreen Monitor 65926E *1or Radar Display - LCD Monitor (Kit Form) 65823A, 65927C, 4301009-1 or 4304219-1 *2Processor - Radar 65901AD or 65901AE *1, 2VMFT PCIO Interface Unit 65900AA or 65900AB *1, 2Auxiliary PCIO Interface Unit65940AAControl Panel (Deck Console or desktop) 65903AF or 65903 AG *1or Control Panel (Kit form) 65903KF or 65903 KG *2Security Device (CAT1 standard radar) 325DV001 *3or Security Device (CAT1C Chart Radar) 32SDV002 *3or Security Device (Multi-node) 32SDV005 *3, 4, 5or Security Device (Total Watch) 32SDV006 *3, 5SOFTWARE:- Main System Software Version 4.1.3 *6End of ListThe and may also include items from the list of optional items found in schedule 3 on Page 5.NOTES:-1 These units integrate with the deck mount console (See schedule 3) to form a stand alone deck mount Radar system.2 These units are provided in kit form for possible inclusion in a shipyard built navigation console.3 The appropriate security device is selected from these 4 options.4 The 32SDV005 security device allows operation as part of an integrated multi display ships bridge. Sperry Marine provide asecurity string to define product type on all network node for a particular vessel's bridge operating plan. The product typemust be set on commissioning to "CAT1 radar" or "CAT1C Chart Radar Operation" or "Total Watch" as appropriate.5 "Total Watch" is the Sperry Marine name for a Multi-Function workstation. This additional function allows the operator to`Hot Switch' between Chart Radar, ECDIS and Conning Display (All share identical hardware elements). Such operation maybe subject to 'Flag' or 'Class' installation approval for a particular vessel's bridge operating plan. The approval statusconferred by this certificate only applies when the operation mode is set to "Chart Radar".6 This approval remains valid for subsequent Minor software amendments, as allowed by the 4.x.x format (x represents anumeral), where written details of any such modifications have been submitted to and accepted by QinetiQ.Technical CharacteristicsPARAMETER PROVISION COMMENT23.1" Colour LCDPRESENTATION DISPLAY TYPEor 25.5" Colour LCDor 27" Colour LCDRADAR DISPLAY CIRCLE _320mm Effective DiameterRADAR TARGET CAPACITY ACQUIRED 100 targets 40 minimum for Cat 1AUTO ACQUISITION OF TARGETS Yes Required for Cat 1TRIAL MANOEUVRE Yes Required for Cat 1AIS TARGET CAPACITYIEC 61162 seriesSERIAL (NMEA) PORTSTEMPERATURE RANGE& IEC 60945 CLASSPOWER SOURCEACTIVATEDSLEEPINGProtected40200Listener - 6Talker - 4Listener - 3Talker - 2-15°C to +55°C.100-240V AC, 50/60HzIEC 62288:2008 Category :- Full operational Radar displayDedicated Keyboard, Trackerball and on-screen controlsallows quick & easy control functions and data entry.40 minimum for Cat 1200 minimum for Cat 1) Conformity to IEC 61162-1:2007.1 Conformity to IEC 61162-2:1998-- All unitsConditions of Issue of this certificate are printed on Page 8.QinetiQCody Technology ParkIvely Road, FarnboroughHampshire. GU14 OLXQinetiQ/EES/EMES/MED/002/2.0Page 3 of 8Certificate NumberQQ-MED-01/10-01R

Schedule 2b -Category 1 & 1C RadarVisionMaster FT Dual Channel, CAT]. 34 Radar SystemsVisionMaster FT Dual Channel, CAT1C 34 Chart Radar SystemsThe applicant declared that any two of the following radar Transceiver units when operated with thedual radar processing and display units from schedule 2a, form the system designations given on Page 1.The resulting system has been assessed & tested, and satisfactory details of these units were included inthe technical file.X-Band Transcivers:-Transceiver/Turning Unit (10kW or 25kW) 65810#A* or 65825#A *789or Transceiver/Turning Unit (10kW or 25kW) 65910#A# or 65925#A0 *789or Transceiver Bulkhead (10kW)or Transceiver Bulkhead (25kW)and Turning Unit65810E, F, G, H, or L65825E, F, G, H, or L65801BAR or CA* *8 9X-Band Antenna (4, 6 or 8ft)65604A or 65606A or 65608AS-Band Transcivers:-Transceiver/Turning Unit (30kW) 65830M§R or N§* *9,10or Bulkhead Transceiver (30kW)65831A or Band Turning Unit 65830B§R or C§* *9,10Scanner Control Unit 65837A0 *11S-Band Antenna 12ft65612AEnd of ListNOTES:-7 A 1st letter (#) suffix (M, N, P, T or W) is used to denote the choice Bias limiter, extra short pulse transmit or additionalfacilities8 This item is link selectable on installation to 24 or 48 RPM antenna speed9 A 3rd letter (*) suffix (R, T or U) is used to denote the choice of pulse or syncro azimuth signal.10 A 2nd letter (§) suffix (E, F, G, H, J, K, L, M, P, Q, R or S) is used to denote the choice of operating voltage and 24 or 48 RPMantenna speed.11 A 2nd letter (0) suffix (B, C, E, F or H) is used to denote the choice of operating voltage and 24 or 48 RPM antenna speed.Technical CharacteristicsPARAMETER PROVISION COMMENT±30MHz±10MHzFREQUENCY OF OPERATION9.410 GHz - X-Band3.050 GHz-S-BandPULSE REPETITION FREQUENCY 1800, 1800, 785 3000 on `G' & 'L' 1st Suffix TxRxPULSE LENGTHS0.05µs, 0.25µs, 0.75µsEMISSION CODE3MOOPONANPOWER CHARACTERISTICTEMPERATURE RANGE& IEC 60945 CLASSPOWER SOURCEExposedProtected10kW or 25kWor 30kW-25°C to +70°C-15°C to+55°C.100-240VAC, 50/60Hz -(PEP) X-Band(PEP) S-Band-- Turning Units & Antenna-- All other unitsConditions of Issue of this certificate are printed on Page 8.QinetiQCody Technology Park Certificate Number QQ-MED-01/10-01RIvely Road, FarnboroughHampshire. GU14 OLXQinetiQ/EES/EMES/MED/002/2.0Page 4 of 8

Certificate of Type Approval - Schedule 3VisionMaster Radar Systems - Ancillary and Optional UnitsThe applicant declared that the following units may be added to the basic radar systems illustrated inschedules 2a and 2b. These units have been assessed & tested in conjunction with Visionmaster FTseries radar systems, and satisfactory details are included in the technical files.ANCILLARY UNITS:-Monitor ChassisDeck mount PedestalPlinth (for Pedestal above)6 way Interswitch Unit (6x6)2 way Interswitch Unit (2x4)Network switchNetwork Power SupplyNetwork Serial InterfaceSlave Junction BoxMODULAR UNITS (Kit Form Only):-Trackerba IIControl PanelOn/Off SwitchUSB Port6592360565923665 or 6592367565923200 or 65923201 or 6592320265846A65842A4305049-4 or 4301770-$ *24303090-14802181-$*265849A65900614 or 65900615 or 65900650 *365900667 *365900625 *365900635 *3* NOTES:-123End of ListStandard items when used together with LCD Monitor, Radar processor, PCIO interface unit and Control Panelto form integrated Deck mount console RadarThe symbol $ is shown where a number suffix is used to indicate a minor variant.These units are identified indiviually when the Kit Form Processors and Monitors are used in a systemConditions of Issue of this certificate are printed on Page 8.QinetiQCody Technology ParkIvely Road, FarnboroughHampshire. GU14 OLXCertificate NumberQQ-MED-01/10-01RQi netiQ/EES/EMES/MED/002/2.0Page 5 of 8

This Page intentionally BlankConditions of Issue of this certificate are printed on page 8.QinetiQCody Technology ParkIvely Road, FarnboroughHampshire. GU14 OLXCertificate NumberQQ-MED-01/10-01RQinetiQ/EES/EMES/MED/002/2.0Page 6 018

Certificate of Type Approval - Schedule 4Statement on Spurious and Out of Band Emissions and the Boundarybetween these emissionsThe following Radar Transceivers, which forms part of the systems shown on earlier schedules, has beensubject to a measurement procedure as detailed in IEC 60936-1, Annex D, as contained in Amendment1, dated July 2002 and the guidelines contained in ITU-R Recommendation RM.1177-3. This standarddefines the test method and requirements for shipborne radar to meet in order to comply with AppendixS3 of the Radio Regulations and ITU-R Recommendations SM.1539-1 and SM.1541-1.The results of the measurement procedure were satisfactory and provide sufficient evidence that thisRadar Transceiver is compliant with the criteria contained in the stated standards.The Transceivers Measured were:-Description Model No. Modulator PCB MagentronTransceiver/Turning Unit (10kW) 65810* o *1'3 65810812 MG5473Transceiver/Turning Unit (10kW) 65910#** *1'3 65810812 MG5473Transceiver/Turning Unit (25kW) 65825#** *1.3 65825812 MG 5424Transceiver/Turning Unit (25kW) 65925### *1'3 65825812 MG 5424Transceiver/Turning Unit (30kW) 65830### *1'3 65830812 MG5223 or M1302AThe test reports detailling the tests and test results obtained are:-QinetiQ/FST/CMT/CR012225QinetiQ/FST/CMT/TR022173These also detail the magnetron, modulator circuit, rotary joint* 2 and any filters fitted to the test unitto which the results specifically apply.The Transceiver Modules contained in the above Transceiver/Turning units are also found in thefollowing Bulkhead units. Since the applicable electronic circuitry and component parts are identical andthe addition of waveguide/heliax feeder is known to have band limiting properties, a presumption ofconformity can be applied by analogyTransceiver Bulkhead (10kW) 65810** 1,3Transceiver Bulkhead (25kW) 65825# *1,3Bulkhead Transceiver (30kW) 65831 *1,3Note *1 The symbol * or ** denotes a 1 or 3 letter suffix detailling aspects of the build standard.Details of the suffixes are provided on the appropriate equipment schedule pages.*2 The manufacturer declared that the build standard of the rotary joint is suitably definedwithin the turning unit designation.*3 These transceivers are recognised by the USA, Federal Communications Commission (FCC) andbear their Identifier numbers as follows:65810### or 65810# or 65910### FCC Identifier BT9BME1065825### or 65825# or 65925### FCC Identifier BT9BME2565830### or 65831# FCC Identifier BT9BVT30Conditions of Issue of this certificate are printed on Page 8.QinetiQCody Technology ParkIvely Road, FarnboroughHampshire. GU14 OLXCertificate NumberQQ-MED-01/10-01RQinetiQ/EES/EMES/MED/002/2.0Page 7of8