Technical Rider Lila Downs - Mad Minute Music

06. BacklinePlease confirm the clear reception of this technical rider to florian@redhouse-agency.comIncluding ten (10) points on seven (07) pagesDrums: Professional Drum Kit -Yamaha or Sonor (to be placed on 3 x 2 m risers)(01) 10" mounted tom (short)(01) 14" floor tom (w/legs)(01) 20"bass drum and chain driven pedal (with a hole in the front head)(06) Cymbal stands (booms)(01) Hi-hat stand(03) Snare stands(01) Drum seat(01) Drum carpet 2 x 2 mPercussion: (All Latin Percussion) PLEASE PROVIDE A WRENCH FOR TUNING(02) Congas (conga and tumba) no stands neededGuitar:(01) Guitar amp:Fender Vibroluxor Fender Super Reverbor Fender Twin Reverb (Do NOT get “The Twin” with the red knobs, please!)(04) Guitar StandsBass:1st choice: EBS HD-350 head and (01) 4X10 cabinet2nd choice: Eden WT800 head and (01) 4X10 XLT cabinet3rd choice: Ampeg SVT IV head (no III or classic or vintage heads) and (01) 4X10 Eden XLTcabinetPlease do not have any SWR or Hartke equipment sentMiscellaneous:- small table for Laptop- 12 towels for musicians- 12 bottles of still waterPower Requirements outside of US:02 power converters 220 V to 110 V with American plugs at defined stage positions04 off 220 V CEE points at defined stage positions (see stage plot)01 three way power distribution strip 220 V CEE each at FOH and Monitor positionSet up on stage is to be done before the band arrives using the following basicdimensions:Center stage (lead vocal) to beginning of drum kit 2.5 Mts. (8.2 feet) between cl/sax and harp 5Mts. (16.4 feet). The gaps between are used by guitar and bass according to stage plot.RISERS: Drum riser 3 x 2 m 40 cm high (ROLL RISERS FOR MULTI BAND FESTIVALS!!!)Page 5 of 7