Assembly and operating instructions - Duodos 15 Air-driven

More documents

Recommendations

Info

Operation of the double diaphragm pump5 Operation of the double diaphragm pump• User qualification: operation instructed personnel, seeÄ Chapter 2.2 ‘Users' qualifications’ on page 7The double diaphragm pump is fully integrated into the customerprovided system and is then controlled from this system. It is notpossible to operate the double diaphragm pump directly.16
Commissioning• User qualification, commissioning: trained user, seeÄ Chapter 2.2 ‘Users' qualifications’ on page 7Check the fastening elements are correctly seated.Before commissioning the double diaphragm pump,you must check that all fastening elements with sealingrings are correctly seated. The seals may ‘creep’ , sothat the fastening elements come loose over time.6.1 Checks prior to commissioningWARNING!Danger from hazardous substances!Possible consequence: Fatal or very serious injuries.Please ensure when handling hazardous substancesthat you have read the latest safety data sheets providedby the manufacture of the hazardous substance.The actions required are described in the safety datasheet. Check the safety data sheet regularly andreplace, if necessary, as the hazard potential of a substancecan be re-evaluated at any time based on newfindings.The system operator is responsible for ensuring thatthese safety data sheets are available and that theyare kept up to date, as well as for producing an associatedhazard assessment for the workstations affected.The following checks are to be carried out:• Ensure that the device has not been damaged during transportationor storage. Immediately report any damage to the supplier• Check that the air pressure is suitable for the device.• Ensure that the device is suitable for the liquid to be conveyedand that it will not be attacked.• Make sure that the temperature of the liquid does not exceedthe recommended temperature range• Install a manometer in the discharge line if the back pressurevalue is unknown• Under the operating conditions, check the values for flow, pressure,etc.• Install a pressure relief valve in the discharge line in order toprotect the pump in the event that a valve is unintentionallyclosed off or the line is blocked in another way.17
Page 2: ProMinent Dosiertechnik Heidelberg
Page 5 and 6: 1.1 FunctionThe Duodos is an air-dr
Page 7 and 8: Safety and ResponsibilityNOTICE!Nat
Page 9 and 10: Safety and Responsibility2.4 Duodos
Page 12 and 13: Assembly• User qualification, ins
Page 14 and 15: Assembly4.2 Ambient conditionsNOTIC
Page 18 and 19: Commissioning2.6.2 Priming1. To sta
Page 20 and 21: Maintenance of the double diaphragm
Page 30 and 31: Technical Drawing - Duodos 158.1 Ex
Page 32 and 33: Technical Drawing - Duodos 15Parts
Page 34 and 35: Spare Parts kitsItem Quantity Artic
Page 36 and 37: 40 PSI (2,72 bar)Technical dataRepa
Page 38 and 39: Declaration of Conformity12 Declara

Assembly and operating instructions - Duodos 15 Air-driven

Create successful ePaper yourself

Delete template?

Save as template?