Maxi Line Shelves & Accessories - Madix

7/11maxi line shelves & accessoriesDowntilt Tag Molding• Assist customers in viewing product pricingand information on upper level shelves• 51° downtilt situates pricing withincustomer’s natural line of sightM29(COLOR)-(NW)M29...... Downtilt Tag MoldingCOLOR...... S=AluminumG=GoldP=PaintedNW...... Nominal Width 36" or 48"(914 mm or 1219 mm)Wooden Tag Molding• Enhance appearance of SUS, SBS, or HUS• Available in three finishes: Clear Maple, ClearOak, and Cherry• Tag mold is pre-assembled onto MadixStandard Upper and Base Shelves• Wooden Tag Mold is ordered in addition toSUS, SBS, or HUS shelves• Minimum order is 800', i.e. 200 - 4' pieces(243.84 m, i.e. 200 - 1219 mm pieces)Tubular Metal Bumper System• Designed to help prevent damage tobase shelf tag molding from shoppingcarts, pallet jacks, and floor buffers• Starter includes bumper and twomounting brackets• Add-on includes bumper tube andsplicer bracket• End Cap is designed to mount on WallSections at end of gondola runs where wallsection width matches width of gondola• TMBS(NW)(ND)EC cannot be used by itself,it requires the TMBS Starter and Add-onsections(COLOR)-(NW)(COLOR)...... CMT=Clear MapleCOT = Clear OakMWCT = CherryNW...... Nominal Width 36" or 48"(914 mm or 1219 mm)Side ViewTMBS(NW)(ND)(OPT)TMBS...... Tubular Metal Bumper SystemNW...... Nominal Width 30" to 48" in 6" increments(762 mm to 1219 mm in 152 mm increments)ND...... Nominal Depth 10" to 24" in 2" increments(254 mm to 610 mm in 51 mm increments)OPT...... S=StarterA=Add-onEC=End Cap Unittag molding & tubular metal bumper systemStarter Add-on End Cap UnitTexas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com© 2014 Madix, Inc. All Rights Reserved. Not responsible for errors or omissions in printing.Prices and specifications subject to change without notice.9