Maxi Line Shelves & Accessories - Madix

maxi line shelves & accessories7/11Half Wrap Around Shelf• May be used on freestanding end• Displays where at least two units ofshelving make up the run• Lines up side by side with StandardUpper and Base Shelf applications• Continuous tag molding accommodates11/4" (32 mm) tagsWA(TYPE)S-(NW)(ND)-(HAND)WA...... Wrap AroundTYPE...... U=UpperB=BaseS...... ShelfNW...... Nominal Width 3' or 4'(914 mm or 1219 mm)ND...... Nominal Depth 12" to 30" in 2" increments(305 mm to 762 mm in 51 mm increments)HAND...... RH=Right-HandLH=Left-HandConfigurable OptionsTYPE-OPTTYPE...... Blank=PerforatedNP=Non-PerforatedOPT...... Optional CoveringL=LaminateC=CarpetF=FabricRight-Hand ShownFinish CodeFIN1-FIN2FIN1...... ShelfFIN2...... Tag Mold Option:BLANK=Painted Color of ShelfDGA2M=Mirror FinishDGA2G=Gold FinishDGA2P=Painted Finish -Different from ShelfDGA2A=Silver Finishwrap around shelvingWrap Around Shelf• Specially designed for a completelyfinished end look• Five widths to match the endframe widths• Con tin u ous tag molding with 2" (51 mm)radius safety corners• Accommodates 11/4" (32 mm) tags• Tag molding matches all standardshelves and end flats• Load capacity 150 lbs per individualupper shelf• Load capacity 600 lbs in all sizes, basedon evenly distributed static loading perindividual base shelfWA(TYPE)S-(NW)(ND)WA...... Wrap Around Upper ShelfTYPE...... U=UpperB=BaseS...... ShelfNW...... Nominal Width 3' or 4'(914 mm or 1219 mm)ND...... Nominal Depth 12" to 30" in 2" increments(305 mm to 762 mm in 51 mm increments)Configurable OptionsTYPE-OPTTYPE...... Blank=PerforatedNP=Non-PerforatedOPT...... Optional CoveringL=LaminateC=CarpetF=FabricFinish CodeFIN1-FIN2-FIN3FIN1...... ShelfFIN2...... Tag Mold Option:BLANK=Painted Color of ShelfDGA2M=Mirror FinishDGA2G=Gold FinishDGA2P=Painted Finish - Different from ShelfDGA2A=Silver FinishFIN3...... Base End CoversWrap Around Upper ShelfWrap Around Base ShelfWrap Around NotchedUpper Shelf• Specially designed for a completelyfinished end look• Continuous tag molding with 2" (51 mm)radius safety corners• Accommodates 1¼" (32 mm) tags• Tag molding matches all Standard Shelvesand End Flats• For 2' x 3': NW 36", ND 12", 18", 24"(NW 914 mm, ND 305 mm, 457 mm, 610 mm)• For 3' x 4': NW 48", ND 12", 18", 24"(NW 914 mm, ND 305 mm, 457 mm, 610 mm)WAUSN(NW)(ND)WAUSN...... Wraparound Notched Upper ShelfNW...... Nominal Width 36" or 48"(914 mm or 1219 mm)ND...... Nominal Depth 12", 18", or 24"(305 mm, 457 mm, or 610 mm)14Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com© 2014 Madix, Inc. All Rights Reserved. Not responsible for errors or omissions in printing.Prices and specifications subject to change without notice.